[oe] Angstrom/OE-dev: cpufrequtils failure

[Jack Mitchell]

I am trying to build the systemd-image for Angstrom and I run into an 
error with cpufrequtils as detailed below:

    ERROR: Function failed: do_install (see
    /home/jack/angstrom/build/tmp-angstrom_2010_x-eglibc/work/armv7a-angstrom-linux-gnueabi/cpufrequtils-008-r2/temp/log.do_install.16196
    for further information)
    + cd
    /home/jack/angstrom/build/tmp-angstrom_2010_x-eglibc/work/armv7a-angstrom-linux-gnueabi/cpufrequtils-008-r2/git
    + do_install
    + oe_runmake -e install
    DESTDIR=/home/jack/angstrom/build/tmp-angstrom_2010_x-eglibc/work/armv7a-angstrom-linux-gnueabi/cpufrequtils-008-r2/image
    + '[' xmake = x ']'
    + bbnote make -j12 V=1 CROSS=arm-angstrom-linux-gnueabi-
    'LIBTOOL=arm-angstrom-linux-gnueabi-libtool --tag cc' STRIPCMD=echo
    -e install
    DESTDIR=/home/jack/angstrom/build/tmp-angstrom_2010_x-eglibc/work/armv7a-angstrom-linux-gnueabi/cpufrequtils-008-r2/image
    + echo 'NOTE: make -j12 V=1 CROSS=arm-angstrom-linux-gnueabi-
    LIBTOOL=arm-angstrom-linux-gnueabi-libtool --tag cc STRIPCMD=echo -e
    install
    DESTDIR=/home/jack/angstrom/build/tmp-angstrom_2010_x-eglibc/work/armv7a-angstrom-linux-gnueabi/cpufrequtils-008-r2/image'
    NOTE: make -j12 V=1 CROSS=arm-angstrom-linux-gnueabi-
    LIBTOOL=arm-angstrom-linux-gnueabi-libtool --tag cc STRIPCMD=echo -e
    install
    DESTDIR=/home/jack/angstrom/build/tmp-angstrom_2010_x-eglibc/work/armv7a-angstrom-linux-gnueabi/cpufrequtils-008-r2/image
    + make -j12 V=1 CROSS=arm-angstrom-linux-gnueabi-
    'LIBTOOL=arm-angstrom-linux-gnueabi-libtool --tag cc' STRIPCMD=echo
    -e install
    DESTDIR=/home/jack/angstrom/build/tmp-angstrom_2010_x-eglibc/work/armv7a-angstrom-linux-gnueabi/cpufrequtils-008-r2/image
    /usr/bin/install -c -d
    /home/jack/angstrom/build/tmp-angstrom_2010_x-eglibc/work/armv7a-angstrom-linux-gnueabi/cpufrequtils-008-r2/image/usr/lib
    /usr/bin/install -c -d
    /home/jack/angstrom/build/tmp-angstrom_2010_x-eglibc/work/armv7a-angstrom-linux-gnueabi/cpufrequtils-008-r2/image/usr/bin
    /usr/bin/install -c -m 644 -D man/cpufreq-set.1
    /home/jack/angstrom/build/tmp-angstrom_2010_x-eglibc/work/armv7a-angstrom-linux-gnueabi/cpufrequtils-008-r2/image/usr/share/man/man1/cpufreq-set.1
    /usr/bin/install -c -d
    /home/jack/angstrom/build/tmp-angstrom_2010_x-eglibc/work/armv7a-angstrom-linux-gnueabi/cpufrequtils-008-r2/image/usr/share/locale
    make: /usr/bin/install: Command not found
    make: *** [install-man] Error 127
    make: *** Waiting for unfinished jobs....
    make: /usr/bin/install: Command not found
    make: *** [install-tools] Error 127
    make: /usr/bin/install: Command not found
    make: *** [install-lib] Error 127
    make: /usr/bin/install: Command not found
    make: *** [install-gmo] Error 127
    Translating de ...... done.
    54 translated messages.
    Translating fr ...... done.
    45 translated messages, 7 fuzzy translations, 2 untranslated messages.
    Translating it ...... done.
    54 translated messages.
    Translating cs ...... done.
    45 translated messages, 7 fuzzy translations, 2 untranslated messages.
    Translating pt ...... done.
    54 translated messages.
    + die 'oe_runmake failed'
    + bbfatal 'oe_runmake failed'
    + echo 'ERROR: oe_runmake failed'
    ERROR: oe_runmake failed
    + exit 1

Now I assume this means that 'install' needs to be added to the build 
deps of cpufrequtils? I'm no expert in this though so would it just be a 
matter of adding 'install' to the depends variable?

Regards,
Jack.