[oe] [meta-oe][PATCH] hddtemp: add from OE-Classic and update
Paul Eggleton
paul.eggleton at linux.intel.com
Sat Oct 20 11:25:52 UTC 2012
hddtemp is unmaintained upstream so we have to do a bit of patching. All
patches sourced from Debian/Fedora, except hddtemp-no-nls-support.patch
which came from OE-Classic.
Other improvements:
* Install initscript
* Make LICENSE more accurate
* Add LIC_FILES_CHKSUM
* inherit gettext to avoid error during configure
Signed-off-by: Paul Eggleton <paul.eggleton at linux.intel.com>
---
.../hddtemp-0.3-beta15-autodetect-717479.patch | 90 +
.../recipes-support/hddtemp/files/hddtemp-db.patch | 133 +
.../hddtemp/files/hddtemp-no-nls-support.patch | 66 +
meta-oe/recipes-support/hddtemp/files/hddtemp.db | 523 ++
.../hddtemp/files/hddtemp_0.3-beta15-52.diff | 7545 ++++++++++++++++++++
.../recipes-support/hddtemp/hddtemp_0.3-beta15.bb | 30 +
6 files changed, 8387 insertions(+)
create mode 100644 meta-oe/recipes-support/hddtemp/files/hddtemp-0.3-beta15-autodetect-717479.patch
create mode 100644 meta-oe/recipes-support/hddtemp/files/hddtemp-db.patch
create mode 100644 meta-oe/recipes-support/hddtemp/files/hddtemp-no-nls-support.patch
create mode 100644 meta-oe/recipes-support/hddtemp/files/hddtemp.db
create mode 100644 meta-oe/recipes-support/hddtemp/files/hddtemp_0.3-beta15-52.diff
create mode 100644 meta-oe/recipes-support/hddtemp/hddtemp_0.3-beta15.bb
diff --git a/meta-oe/recipes-support/hddtemp/files/hddtemp-0.3-beta15-autodetect-717479.patch b/meta-oe/recipes-support/hddtemp/files/hddtemp-0.3-beta15-autodetect-717479.patch
new file mode 100644
index 0000000..19f8380
--- /dev/null
+++ b/meta-oe/recipes-support/hddtemp/files/hddtemp-0.3-beta15-autodetect-717479.patch
@@ -0,0 +1,90 @@
+Auto-detect disks if none specified
+
+Refer to:
+https://bugzilla.redhat.com/show_bug.cgi?id=717479
+
+diff -up hddtemp-0.3-beta15/doc/hddtemp.8~ hddtemp-0.3-beta15/doc/hddtemp.8
+--- hddtemp-0.3-beta15/doc/hddtemp.8~ 2011-08-18 00:36:05.689001470 +0300
++++ hddtemp-0.3-beta15/doc/hddtemp.8 2011-08-18 00:44:46.753006253 +0300
+@@ -19,7 +19,7 @@
+ hddtemp \- Utility to monitor hard drive temperature
+ .SH SYNOPSIS
+ .B hddtemp
+-.RI [ options ] " [type:]disk" ...
++.RI [ options ] " [[type:]disk]" ...
+ .SH "DESCRIPTION"
+ .PP
+ .B hddtemp
+@@ -35,7 +35,8 @@ You can specify one or more device drive
+ with a
+ .B type
+ like PATA, SATA or SCSI to force hddtemp too use one of these type
+-(because detection can fail).
++(because detection can fail). If no paths are specified, autodetection of
++installed drives is attempted.
+
+
+ .SH "OPTIONS"
+diff -up hddtemp-0.3-beta15/src/hddtemp.c~ hddtemp-0.3-beta15/src/hddtemp.c
+--- hddtemp-0.3-beta15/src/hddtemp.c~ 2011-08-18 00:36:05.638996861 +0300
++++ hddtemp-0.3-beta15/src/hddtemp.c 2011-08-18 00:35:55.485060798 +0300
+@@ -54,6 +54,7 @@
+ #include <linux/hdreg.h>
+ #include <ctype.h>
+ #include <assert.h>
++#include <glob.h>
+
+ // Application specific includes
+ #include "ata.h"
+@@ -255,6 +256,7 @@ int main(int argc, char* argv[]) {
+ int ret = 0;
+ int show_db;
+ struct disk * ldisks;
++ glob_t diskglob;
+
+ backtrace_sigsegv();
+ backtrace_sigill();
+@@ -419,11 +421,6 @@ int main(int argc, char* argv[]) {
+ exit(0);
+ }
+
+- if(argc - optind <= 0) {
+- fprintf(stderr, _("Too few arguments: you must specify one drive, at least.\n"));
+- exit(1);
+- }
+-
+ if(debug) {
+ /* argc = optind + 1;*/
+ quiet = 1;
+@@ -434,6 +431,23 @@ int main(int argc, char* argv[]) {
+ exit(1);
+ }
+
++ memset(&diskglob, 0, sizeof(glob_t));
++ if(argc - optind <= 0) {
++ if(glob("/dev/[hs]d[a-z]", 0, NULL, &diskglob) == 0) {
++ argc = diskglob.gl_pathc;
++ argv = diskglob.gl_pathv;
++ optind = 0;
++ } else {
++ argc = 0;
++ }
++ }
++
++ if(argc - optind <= 0) {
++ globfree(&diskglob);
++ fprintf(stderr, _("Too few arguments: you must specify one drive, at least.\n"));
++ exit(1);
++ }
++
+ init_bus_types();
+
+ /* collect disks informations */
+@@ -527,6 +541,7 @@ int main(int argc, char* argv[]) {
+ else {
+ do_direct_mode(ldisks);
+ }
++ globfree(&diskglob);
+
+ return ret;
+ }
diff --git a/meta-oe/recipes-support/hddtemp/files/hddtemp-db.patch b/meta-oe/recipes-support/hddtemp/files/hddtemp-db.patch
new file mode 100644
index 0000000..a71a9dd
--- /dev/null
+++ b/meta-oe/recipes-support/hddtemp/files/hddtemp-db.patch
@@ -0,0 +1,133 @@
+hddtemp database update
+
+Patch from Fedora 18 SRPM.
+
+--- ../hddtemp.db~ 2007-09-14 21:11:37.000000000 +0300
++++ ../hddtemp.db 2008-02-09 22:10:31.000000000 +0200
+@@ -80,6 +80,8 @@
+
+ "FUJITSU MHV2100AH" 194 C "FUJITSU MHV2100AH"
+ "FUJITSU MHV2100AT" 194 C "FUJITSU MHV2100AT"
++"FUJITSU MHV2100BH" 194 C "FUJITSU MHV2100BH"
++"FUJITSU MHV2060AH" 194 C "FUJITSU MHV2060AH"
+ "FUJITSU MHV2080[AB]H" 194 C "FUJITSU MHV2080AH"
+
+ "FUJITSU MPF3204AH" 194 C "Fujitsu MPF3204AH"
+@@ -325,11 +327,14 @@
+ "ST3120026A" 194 C "Seagate Barracuda V ST3120026A"
+ "ST3160021A" 194 C "Seagate Barracuda 7200.7 - ST3160021A"
+ "ST3160023(A|AS)" 194 C "Seagate Barracuda V ST3160023A and AS (160Gb, ATA100 or Serial ATA)"
++"ST316081[12](A|AS)" 194 C "Seagate Barracuda 7200.9 160GB"
+ "ST3160827AS" 194 C "Seagate Barracuda 7200.7 160GB (Serial ATA)"
+ "ST3200021A" 194 C "Seagate Barracuda 7200.7 Plus 200GB"
+ "ST3200822(A|AS)" 194 C "Seagate Barracuda 7200.7 Plus 200GB (PATA or SATA)"
+-"ST3200826A" 194 C "Seagate Barracuda 7200.8 200Gb"
++"ST3200826A" 194 C "Seagate Barracuda 7200.8 200GB"
+ "ST3250623A" 194 C "Seagate Barracuda 7200.16 250GB"
++"ST3250624AS" 194 C "Seagate Barracuda 7200.9 250GB SATA"
++"ST3250624NS" 194 C "Seagate NL35 SATA (RAID-Edition) 7200 250GB"
+ "ST3250823A" 194 C "Seagate Barracuda 7200.8 250GB"
+ "ST3250823A" 194 C "Seagate Barracuda 7200.7 Plus 250GB"
+ "ST3250823NS" 194 C "Seagate NL35 SATA (RAID-Edition) 7200 250GB"
+@@ -338,9 +343,7 @@
+ "ST3400633(A|AS)" 194 C "Seagate Barracuda 7200.7 400 GB"
+ "ST3500630NS" 194 C "Seagate"
+ "ST3400632NS" 194 C "Seagate"
+-"ST3320620AS" 194 C "Seagate Barracuda 7200.7 320 GB"
+-"ST3500630AS" 194 C "Seagate Barracuda 7200.7 500 GB"
+-"ST3802110A" 194 C "Seagate Barracuda 7200.9 80 GB"
++"ST380[28]110(A|AS)" 194 C "Seagate Barracuda 7200.9 80 GB"
+ "ST910021A" 194 C "Seagate Momentus 7200.1 100GB"
+ "ST910082[35]A" 194 C "Seagate Momentus 5400.2 100GB"
+ "ST9120821A" 194 C "Seagate Momentus 5400.2 120GB"
+@@ -351,12 +354,14 @@
+ "ST960822A" 194 C "Seagate Momentus 5400.2 60GB"
+ "ST96812AS" 194 C "Seagate Momentus 5400.2 60GB SATA"
+ "ST9808211A" 194 C "Seagate Momentus 5400.2 80GB"
++"ST98823AS" 194 C "Seagate Momentus 5400.2 80GB SATA"
+
+ ########################################
+ ############# TOSHIBA Laptops
+ ########################################
+ "MK4313MAT" 220 C "Toshiba MK4313MAT"
+ "TOSHIBA MK1032GAX" 194 C "Toshiba MK1032GAX"
++"TOSHIBA MK1032GSX" 194 C "Toshiba MK1032GSX"
+ "TOSHIBA MK1517GAP" 0 C "Toshiba MK1517GAP"
+ "TOSHIBA MK2018GAS" 226 F "Toshiba MK2018GAS"
+ "TOSHIBA MK2023GAS" 194 C "Toshiba MK2023GAS"
+@@ -377,6 +382,7 @@
+ "TOSHIBA MK6026GAX" 194 C "Toshiba MK6026GAX"
+ "TOSHIBA MK8025GAS" 194 C "Toshiba MK8025GAS"
+ "TOSHIBA MK8026GAX" 194 C "Toshiba MK8026GAX"
++"TOSHIBA MK8032GSX" 194 C "Toshiba MK8032GSX"
+
+ "MK4025GAS" 194 C "Toshiba MK4025GAS"
+
+@@ -397,7 +403,7 @@
+ "WDC WD300BB-00CAA0" 0 C "Western Digital WD300BB"
+ "WDC WD360GD-00FNA0" 194 C "Western Digital SATA Raptor 36.7GB"
+ "WDC WD400BB-00CAA0" 0 C "Western Digital 400BB-00CAA0"
+-"WDC WD400BB-00J[KH]A0" 194 C "Western Digital Caviar WD400BB"
++"WDC WD400BB-00[DJ][KH]A0" 194 C "Western Digital Caviar WD400BB"
+ "WDC WD400BB-23JHC0" 194 C "Western Digital 23JHC0"
+ #"WDC WD400BB-00GFA0" 0 C ""
+ "WDC WD400BB-55HEA0" 194 C "Western Digital Caviar WD400BB"
+@@ -416,7 +422,7 @@
+ "WDC WD600VE-75HDT0" 194 C "Western Digital 600VE-75HDT0"
+ "WDC WD600VE-00HDT0" 194 C "Western Digital 600VE-00HDT0"
+ "WDC WD740GD-00FL21.0" 194 C "Western Digital SATA Raptor"
+-"WDC WD740GD-([05]0FL[AC]0|75FLA1)" 194 C "Western Digital SATA Raptor 74GB 8MB"
++"WDC WD740GD-([05]0FL[AC][01]|75FLA1)" 194 C "Western Digital SATA Raptor 74GB 8MB"
+ "WDC WD800BB-00CAA1" 0 C "Western Digital WD800BB-00CAA1"
+ "WDC WD800BB-(00|22)DKA0" 194 C "Western Digital WD800BB 80 Go"
+ "WDC WD800BB-32CCB0" 194 C "Western Digital 800BB-32CCB0"
+@@ -428,14 +434,13 @@
+ "WDC WD800JB-00CRA1" 0 C "Western Digital Caviar WD800JB"
+ "WDC WD800JB-00(ET|FM|FS)A0" 194 C "Western Digital Caviar 80GB Special Edition 8MB"
+ "WDC WD800JB-00JJ[AC]0" 194 C "Western Digital WD800JB"
+-"WDC WD800JD-(00|55)(HK|JR)A0" 194 C "Western Digital SATA 80GB, 8MB Cache"
+-"WDC WD800JD-00(HK|JN)A0" 194 C "Western Digital SATA 80GB, 8MB Cache"
++"WDC WD800JD-(00|55|75)(HK|JR|JN)[AC]0" 194 C "Western Digital SATA 80GB, 8MB Cache"
+ "WDC WD800LB-(00|55)DNA0" 194 C "Western Digital Caviar WD800LB 80 Go ATA-100"
+ "WDC WD800VE-07HDT0" 194 C "Western Digital 800VE-07HDT0"
+ "WDC WD1200BB-00(FTA|GUA)0" 194 C "Western Digital Caviar EIDE 2MB Cache"
+-"WDC WD1200JB-00(EV|FU|GV)A0" 194 C "Western Digital Caviar 120GB Special Edition 8MB"
++"WDC WD1200JB-00(EV|FU|GV|RE)A0" 194 C "Western Digital Caviar 120GB Special Edition 8MB"
+ "WDC WD1200JB-22GVA0" 194 C "Western Digital Caviar 120GB"
+-"WDC WD1200JD-00(GBB|HBC)0" 194 C "Western Digital WD1200JD"
++"WDC WD1200JD-00(FYB|GBB|HBC)0" 194 C "Western Digital WD1200JD"
+ "WDC WD1200LB-55EDA0" 194 C "Western Digital WD1220LB"
+ "WDC WD1200SB-01KB[AC]0" 194 C "Western Digital Caviar RE (Raid Edition) 120 GB"
+ "WDC WD1600BB-00DWA0" 194 C "Western Digital Caviar WD1600BB"
+@@ -443,10 +448,11 @@
+ "WDC WD2000BB-00FTA0" 194 C "Western Digital WD2000BB"
+ "WDC WD2000JB-(00EV|32EV|34EV|00FU|00GV|55GV|98GV|00KF)A0" 194 C "Western Digital Caviar 200GB Special Edition 8MB"
+ "WDC WD2000JB-00GVC0" 194 C "Western Digital WD2000JB"
++"WDC WD2000JD-00FYB0" 194 C "Western Digital WD2000JD"
+ "WDC WD2000JS-00MHB1" 194 C "Western Digital SATA 200GB"
+ "WDC WD2500JB-(00RE|00EV|00FU|32FU|00GV|55GV)A0" 194 C "Western Digital Caviar 250GB Special Edition 8MB"
+ "WDC WD2500JB-00GVC0" 194 C "Western Digital 250GB"
+-"WDC WD2500JD-(00G|32H)BB0" 194 C "Western Digital SATA Caviar 250GB Special Edition 8MB"
++"WDC WD2500JD-(00G|32H|75H)BB0" 194 C "Western Digital SATA Caviar 250GB Special Edition 8MB"
+ "WDC WD2500JD-40HBC0" 194 C "Western Digital WD2500JD-40HBC0"
+ "WDC WD2500PB-98FBA0" 194 C "Western Digital Caviar 250GB Special Edition 8MB"
+ "WDC WD2500PD-00FZB1" 194 C "Western Digital WD2500PD-00FZB1"
+@@ -510,7 +516,7 @@
+ "Maxtor 7(L|V)300(F|R|S)0" 194 C "Maxtor MaXLine III 300GB 7200rpm"
+ "MAXTOR STM3320620AS" 194 C ""
+
+-"WDC WD1500ADFD-00NLR1" 194 C "Western Digital Raptor 150GB"
++"WDC WD1500ADFD-00NLR[01]" 194 C "Western Digital Raptor 150GB"
+ "WDC WD1600JS-00NCB1" 194 C "Western Digital Caviar 1600JS 160GB Sata"
+ "WDC WD1600SD-01KCC0" 194 C "Western Digital Caviar RE Serial ATA series"
+ "WDC WD2500JD-57HBC0" 194 C "Western Digital Caviar SE (Serial ATA) 250 GB"
+@@ -518,6 +524,8 @@
+ "WDC WD2500JS-41MVB1" 194 C "Western Digital SATAII Caviar 250GB Special Edition 8MB"
+ "WDC WD2500JD-00HBB0" 194 C "Western Digital SATA 250GB"
+ "WDC WD2500KS-00MJB0" 194 C "Western Digital SATA-II Caviar 250GB Special Edition 16MB"
++"WDC WD2500YD-01NVB1" 194 C "Western Digital Caviar RE 250GB 16MB"
+ "WDC WD3000JS-00PDB0" 194 C "Western Digital WD3000JS"
+-"WDC WD3200KS-00PFB0" 194 C ""
++"WDC WD3200KS-00PFB0" 194 C "Western Digital Caviar 320GB 16MB"
+ "WDC WD3200JD-22KLB0" 194 C "Western Digital Caviar SE 320GB 8MB"
++"WDC WD3200SD-01KNB0" 194 C "Western Digital Caviar RE 320GB SATA 8MB"
diff --git a/meta-oe/recipes-support/hddtemp/files/hddtemp-no-nls-support.patch b/meta-oe/recipes-support/hddtemp/files/hddtemp-no-nls-support.patch
new file mode 100644
index 0000000..8f6b9c3
--- /dev/null
+++ b/meta-oe/recipes-support/hddtemp/files/hddtemp-no-nls-support.patch
@@ -0,0 +1,66 @@
+diff -ru hddtemp-0.3-beta15.orig/configure.in hddtemp-0.3-beta15/configure.in
+--- hddtemp-0.3-beta15.orig/configure.in 2005-10-17 20:14:19.000000000 +0100
++++ hddtemp-0.3-beta15/configure.in 2008-06-27 00:00:46.000000000 +0100
+@@ -17,6 +17,7 @@
+ # append the host alias to the tools for cross compiling
+ AC_HEADER_STDC
+ AC_CHECK_HEADERS(fcntl.h)
++AC_CHECK_HEADERS(iconv.h)
+ AC_CHECK_HEADERS(netinet/in.h)
+ AC_CHECK_TYPE(in_addr_t, ,[AC_DEFINE_UNQUOTED([in_addr_t], [uint32_t], [Define to 'uint32_t' if <netinet/in.h> does not define.])], [#include <netinet/in.h>])
+
+@@ -29,6 +30,8 @@
+ AM_GNU_GETTEXT
+ #AM_GNU_GETTEXT([external])
+
++AC_CHECK_FUNCS([bindtextdomain textdomain iconv])
++
+ dnl reasonable guesses for where stuff is installed
+ dnl if we don't do that now, the config.h will use ${prefix}
+ dnl for DEFAULT_DATABASE_PATH.
+diff -ru hddtemp-0.3-beta15.orig/src/hddtemp.c hddtemp-0.3-beta15/src/hddtemp.c
+--- hddtemp-0.3-beta15.orig/src/hddtemp.c 2006-04-19 03:37:35.000000000 +0100
++++ hddtemp-0.3-beta15/src/hddtemp.c 2008-06-26 23:59:40.000000000 +0100
+@@ -276,8 +276,12 @@
+ backtrace_sigbus();
+
+ setlocale (LC_ALL, "");
++#ifdef HAVE_BINDTEXTDOMAIN
+ bindtextdomain (PACKAGE, LOCALEDIR);
++#endif
++#ifdef HAVE_TEXTDOMAIN
+ textdomain (PACKAGE);
++#endif
+
+ show_db = debug = numeric = quiet = wakeup = af_hint = syslog_interval = 0;
+ unit = DEFAULT;
+diff -ru hddtemp-0.3-beta15.orig/src/utf8.c hddtemp-0.3-beta15/src/utf8.c
+--- hddtemp-0.3-beta15.orig/src/utf8.c 2006-04-19 03:37:02.000000000 +0100
++++ hddtemp-0.3-beta15/src/utf8.c 2008-06-27 00:02:15.000000000 +0100
+@@ -23,7 +23,9 @@
+
+ // Standard includes
+ #include <stdlib.h>
++#ifdef HAVE_ICONV_H
+ #include <iconv.h>
++#endif
+ #include <langinfo.h>
+ #include <locale.h>
+ #include <string.h>
+@@ -34,6 +36,7 @@
+
+ static char *iconv_from_utf8_to_locale(const char *string, const char* fallback_string)
+ {
++#ifdef HAVE_ICONV
+ const size_t buffer_inc = 80; // Increment buffer size in 80 bytes step
+ const char *charset;
+ iconv_t cd;
+@@ -93,6 +96,8 @@
+ if (dest_buffer != NULL)
+ free(dest_buffer); // free buffer
+ free(src_buffer); // free string
++#endif
++
+ return strdup(fallback_string); // and return fallback string
+ }
+
diff --git a/meta-oe/recipes-support/hddtemp/files/hddtemp.db b/meta-oe/recipes-support/hddtemp/files/hddtemp.db
new file mode 100644
index 0000000..4a061cf
--- /dev/null
+++ b/meta-oe/recipes-support/hddtemp/files/hddtemp.db
@@ -0,0 +1,523 @@
+#
+# Insert a regular expression for support of the model or the serie of your hard drive.
+# If you don't know what to put in the second field, put the number
+# that appears most often for your brand :o)
+# A value of zero meens that we know that the drive doesn't have
+# a temperature sensor (you can set the unit to C or F).
+#
+############################################################################
+# The following list was found at (http://www.almico.com/forumharddisks.php)
+# If your drive is in the list send me a mail.
+#
+# Manufacturer Model Size Notes
+# FUJITSU FUJITSU MPF3102AH 10.0GB
+# FUJITSU FUJITSU MPG3204AH E 20.0GB
+# FUJITSU FUJITSU MPG3307AT 30.0GB
+# FUJITSU FUJITSU MPG3409AH 40.0GB
+# FUJITSU FUJITSU MPG3409AH EF 40.0GB
+# HITACHI HITACHI_DK23CA-10 9.8GB
+# HITACHI HITACHI_DK23CA-15 14.7GB
+# SAMSUNG SAMSUNG SV3012H 29.4GB
+# SEAGATE ST310210A 10.0GB
+# SEAGATE ST310211A 9.8GB
+# SEAGATE ST310215A 10.0GB
+# SEAGATE ST315320A 14.9GB
+# SEAGATE ST320410A 19.6GB
+# SEAGATE ST320413A 19.6GB
+# SEAGATE ST320420A 19.9GB
+# SEAGATE ST330610A 29.3GB
+# SEAGATE ST330620A 29.3GB
+# SEAGATE ST330621A 29.3GB
+# SEAGATE ST330630A 29.9GB
+# SEAGATE ST340016A 39.1GB
+# SEAGATE ST340810ACE 39.1GB
+# SEAGATE ST380020ACE 78.2GB
+# WESTERN DIGITAL WDC AC210200D 10.0GB
+# WESTERN DIGITAL WDC AC29100D 8.9GB
+# WESTERN DIGITAL WDC AC420400D 19.9GB
+# WESTERN DIGITAL WDC WD102AA 10.0GB
+#
+#################################################
+
+########################################
+############# ExcelStor drives
+########################################
+# "ExcelStor Technology CT215" ??? ? "ExcelStor CT215"
+"ExcelStor Technology J3.0" 194 C "ExcelStor Technology 3xy (xy GB)"
+"ExcelStor Technology J6.0" 194 C "ExcelStor Technology 6xy (xy GB)"
+"ExcelStor Technology J680" 194 C "ExcelStor Technology J680 (80 GB)"
+"ExcelStor Technology J860" 194 C "ExcelStor Technology J860 (60 GB)"
+"ExcelStor Technology J880" 194 C "ExcelStor Technology J880 (80 GB)"
+
+
+
+########################################
+############# Fujitsu drives
+########################################
+"FUJITSU MHM2100AT" 0 C "Fujitsu MHM2100AT"
+
+"FUJITSU MHN2150AT" 194 C "Fujitsu MHN2150AT"
+"FUJITSU MHN2200AT" 194 C "Fujitsu MHN2200AT"
+"FUJITSU MHN2300AT" 194 C "Fujitsu MHN2300AT"
+
+"FUJITSU MHR2020AT" 194 C "Fujitsu MHR2020AT"
+"FUJITSU MHR2030AT" 194 C "Fujitsu MHR2030AT"
+
+"FUJITSU MHS2030AT" 194 C "Fujitsu MHS2030AT"
+"FUJITSU MHS2040AT" 194 C "Fujitsu MHS2040AT"
+"FUJITSU MHS2060AT" 194 C "Fujitsu MHS2060AT (Apple PowerBook G4)"
+
+"FUJITSU MHT2030AC" 194 C "Fujitsu Mobile 30GB, 2MB, 4200RPM (automotive)"
+
+"FUJITSU MHT2030AT" 194 C "Fujitsu MHT2030AT"
+"FUJITSU MHT2040AH" 194 C "Fujitsu MHT2040AH"
+"FUJITSU MHT2040AT" 194 C "Fujitsu MHT2040AT"
+"FUJITSU MHT2060AH" 194 C "Fujitsu MHT2060AH"
+"FUJITSU MHT2060AT" 194 C "Fujitsu MHT2060AT"
+"FUJITSU MHT2080AH" 194 C "Fujitsu MHT2080AH"
+
+"FUJITSU MHU2100AT" 194 C "Fujitsu MHU2100AT 100GB, 8MB (4200RPM)"
+
+"FUJITSU MHV2100AH" 194 C "FUJITSU MHV2100AH"
+"FUJITSU MHV2100AT" 194 C "FUJITSU MHV2100AT"
+"FUJITSU MHV2080[AB]H" 194 C "FUJITSU MHV2080AH"
+
+"FUJITSU MPF3204AH" 194 C "Fujitsu MPF3204AH"
+
+"FUJITSU MPG3204AT.*" 194 C "Fujitsu MPG3204AT"
+"FUJITSU MPG3307AT" 194 C "Fujitsu MPG3307AT"
+"FUJITSU MPG3409AT.*" 194 C "Fujitsu MPG3409AT E"
+"FUJITSU MPG3409AH.*" 194 C "Fujitsu MPG3409AH E"
+"FUJITSU MPG3204AH" 194 C "Fujitsu MPG3204AH"
+"FUJITSU MPG3102AT E" 194 C "FUJITSU MPG3102AT E"
+
+
+
+########################################
+############# Hitachi drives
+########################################
+"HITACHI_DK13FA-40B" 194 C "Hitachi DK13FA-40B"
+"HITACHI_DK228A-65" 0 C "Hitachi DK228A-65"
+"HITACHI_DK23CA-(15|20|30|30B|75)" 194 C "Hitachi DK23CA series"
+"HITACHI_DK23DA-[234]0" 194 C "Hitachi DK23DA series"
+"HITACHI_DK23EA-[2346]0" 194 C "Hitachi DK23EA series"
+"HITACHI_DK23EB-40" 194 C "Hitachi DK23EB series"
+"HITACHI_DK23FA-[468]0" 194 C "Hitachi DK23FA series"
+"HITACHI_DK23FB-[46]0" 194 C "Hitachi DK23FB series"
+
+"HDS722516VLAT[28]0" 194 C "Hitachi Deskstar 7K250 160GB 2/8MB cache"
+"HDS722525VLAT80" 194 C "Hitachi Deskstar 7K250 200/250GB, 7200RPM, 8MB, Parallel-ATA"
+"HDS722512VLAT80" 194 C "Hitachi Deskstar 7K250 80GB"
+"HDS722540VLAT20" 194 C "Hitachi Deskstar 7K250, 40GB, 7200RPM, 2MB cache"
+"HDS722580VLAT20" 194 C "Deskstar 7K250 60GB"
+"HDS724040KLSA80" 194 C "Hitachi Deskstar 7K250 400GB, 7200RPM, 8MB, Serial-ATA"
+"HDS728080PLAT20" 194 C "Hitachi Deskstar 7K80 80GB"
+
+"HDS722525VLSA80" 194 C "Hitachi Deskstar 7K250 250GB, 7200RPM, 8MB, SATA"
+"HDS722516VLSA80" 194 C "Hitachi Deskstar 7K250 160GB 8Mo cache SATA"
+"HDS722580VLSA80" 194 C "Hitachi Deskstar 7K250 80GB SATA"
+"HDS728040PLAT20" 194 C "Hitachi Deskstar 7K80 40GB"
+
+"HDS724040KLAT80" 194 C "Hitachi Deskstar 7K400 400GB 8Mo cache PATA"
+
+"HDT7225(16|25)DLAT80" 194 C "Hitachi Deskstar T7K250 series, 7200RPM, 8MB, PATA"
+"HDT722516DLA380 V43O" 194 C "Hitachi T7K250 SATA"
+"HDT722525DLA380" 194 C "Hitachi Deskstar T7K250 250GB 8Mo cache SATAII"
+"HDT725050VLA360" 194 C "Hitachi Deskstar T7K500 500GB, 7200RPM, 16MB, SATA II"
+
+"HTE721010G9AT00" 194 C "Hitachi Travelstar 100GB (7200RPM)"
+"HTE726060M9AT00" 194 C "Hitachi Travelstar 60GB (7200RPM)"
+"HTS424030M9AT00" 194 C "Hitachi Travelstar 30GB (4200RPM)"
+"HTS424040M9AT00" 194 C "Hitachi Travelstar 4K40 40GB 2MB cache (4200RPM)"
+"HTS541010G9SA00" 194 C "Hitachi Travelstar 100GB SATA"
+"HTS541040G9AT00" 194 C "Hitachi Travelstar 40GB (5400RPM)"
+"HTS541080G9AT00" 194 C "Hitachi Travelstar 80GB (5400RPM)"
+"HTS548020M9AT00" 194 C "Hitachi Travelstar 20GB (5400RPM)"
+"HTS548030M9AT00" 194 C "Hitachi Travelstar 30GB (5400RPM)"
+"HTS548040M9AT00" 194 C "Hitachi Travelstar 40GB (5400RPM)"
+"HTS548060M9AT00" 194 C "Hitachi Travelstar 60GB (5400RPM)"
+"HTS548080M9AT00" 194 C "Hitachi Travelstar 80GB (5400RPM)"
+"HTS721080G9AT00" 194 C "Hitachi Travelstar 7K100 80GB (7200RPM)"
+"HTS726060M9AT00" 194 C "Hitachi Travelstar 60GB"
+
+
+########################################
+############# IBM drives
+########################################
+
+# DJSA serie is using F0h command to report temperature and also have
+# SMART capabilties but it was reported not to work.
+# "DJSA-2(30|32|10|20|05)" 0 C "IBM Travelstar 20GN, 32GH, 30GT series"
+
+"IBM-DARA-212000" 0 C "IBM Travelstar 12GN"
+"IBM-DTTA-35*" 0 C "IBM Deskstar 16GP serie"
+
+# according to specifications they do not seems to have sensor
+# but I prefer waiting for a report
+#"IBM-DTTA-37*" 0 C "IBM Deskstar 14GXP serie"
+
+"IBM-DJNA-35.*" 231 C "IBM Deskstar 25 GP serie"
+"IBM-DJNA-37.*" 231 C "IBM Deskstar 22 GXP serie"
+"IBM-DHEA-(34330|36480)" 0 C "IBM Deskstar 5 serie"
+"IBM-DHEA-(34331|36481|38451)" 0 C "IBM Deskstar 8 serie"
+"IBM-DPTA-37.*" 231 C "IBM Deskstar 34GXP serie"
+"IBM-DPTA-35.*" 231 C "IBM Deskstar 37GP serie"
+"IBM-DTLA-30[57]0[123467][05]" 194 C "IBM Deskstar 40GV & 75GXP series"
+"IC25N0[1234]0ATCS04-0" 194 C "IBM Travelstar 40GN serie"
+"IC25N0[24]0ATC[SX]05-0" 194 C "IBM Travelstar 40GNX serie"
+"IC25N0(10|15|20|30)ATDA04-0" 194 C "IBM Travelstar 30GN serie"
+"IC25N0[23468]0ATMR04*" 194 C "Hitachi Travelstar 80GN"
+"IC25T048ATDA05-0" 194 C "IBM Travelstar 48GH serie"
+"IC25T060ATC[SX]05-0" 194 C "IBM Travelstar 60GH serie"
+"IC35L0[12346]0AVER07" 194 C "IBM Deskstar 60GXP serie"
+"IC35L[01][02468]0AVV[AN]07*" 194 C "IBM Deskstar 120GXP serie"
+"IC35L[01][23689]0AVV207*" 194 C "IBM Deskstar 180GXP serie"
+
+########################################
+############# Maxtor drives
+########################################
+#"Maxtor 2B0[012][04568]H1" ??? C "Maxtor Fireball 541DX"
+"Maxtor 2F0[234]0[LJ]0" 194 C "Maxtor Fireball 3"
+# which one must I trust ?
+#"Maxtor 4D040H2" 9 C "Maxtor DiamondMax D540X-4D"
+#"Maxtor 4D040H2" 0 C "Maxtor 4D040H2"
+#"Maxtor 4D080H4" 12 C "Maxtor DiamondMax D540X-4D"
+#"Maxtor 4D060H3" 12 C "Maxtor DiamondMax D540X-4D"
+#"Maxtor 4D080H4" 9 C "Maxtor DiamondMax D540X-4D"
+"MAXTOR 4K0[468]0H[234]" 194 C "Maxtor DiamondMax D540X serie"
+"MAXTOR 4K020H1" 194 C "Maxtor 4K020H1"
+"Maxtor 4A300J0" 194 C "Maxtor MaxLine II 300GB 5400RPM"
+"Maxtor 4[RA](25|16|12|08|06)0[LJ]0" 194 C "Maxtor DiamondMax 16"
+"Maxtor 5(1024|1369|2049|2732|3073|4098)U(2|3|4|6|8)" 0 C "Maxtor DiamondMax Plus 40"
+"Maxtor 5A250J0" 194 C "Maxtor MaXline II 250GB 5400RPM"
+"Maxtor 5A300J0" 194 C "Maxtor 5A300J0"
+"Maxtor 5T0[24]0H[24]" 0 C "Maxtor DiamondMax Plus 60"
+"Maxtor 6E0[234]0L0" 194 C "Maxtor DiamondMax Plus 8"
+"MAXTOR 6L0[2468]0[LJ][1234]" 194 C "Maxtor DiamondMax Plus D740X family"
+"Maxtor 6V320F0" 194 C "Maxtor Diamond Max 10 SATA II 320 GB"
+"Maxtor 6Y(06|08|12|16|20|25)0[LPM]0" 194 C "Maxtor DiamondMax Plus 9"
+"Maxtor 7L300[RS]0" 194 C "Maxtor 7L300R0 MaxLine+III 300GB 7200rpm"
+"Maxtor 7Y250[PM]0" 194 C "Maxtor MaXLine Plus II 250GB 7200RPM"
+"Maxtor 94098U8" 11 C "Maxtor DiamondMax 40 94098U8"
+
+#"Maxtor 6(B|L)(08|12|16|20|25|30)0[RSPM]0" 194 C "Maxtor DiamondMax Plus 10"
+"Maxtor 6B080M0" 194 C "Maxtor DiamondMax 10 80GB 8MB SATA"
+"Maxtor 6B120M0" 194 C "Maxtor DiamondMax 10 120GB 8MB SATA"
+"Maxtor 6B160M0" 194 C "Maxtor DiamondMax 10 160GB 8MB SATA"
+"Maxtor 6B160P0" 194 C "Maxtor DiamondMax 10 160GB 8MB ATA/133"
+"Maxtor 6B200M0" 194 C "Maxtor DiamondMax 10 200GB 8MB SATA"
+"Maxtor 6B200P0" 194 C "Maxtor DiamondMax 10 200GB 8MB ATA/133"
+"Maxtor 6B250R0" 194 C "Maxtor DiamondMax 10 250GB 16MB ATA/133"
+"Maxtor 6B250S0" 194 C "Maxtor DiamondMax 10 250GB 16MB SATA"
+"Maxtor 6B300R0" 194 C "Maxtor DiamondMax 10 300GB 16MB ATA/133"
+"Maxtor 6B300S0" 194 C "Maxtor DiamondMax 10 300GB 16MB SATA"
+"Maxtor 6L080L0" 194 C "Maxtor DiamondMax 10 80GB 2MB ATA/133 RoHS"
+"Maxtor 6L080M0" 194 C "Maxtor DiamondMax 10 80GB 8MB SATA RoHS"
+"Maxtor 6L080P0" 194 C "Maxtor DiamondMax 10 80GB 8MB ATA/133 RoHS"
+"Maxtor 6L120M0" 194 C "Maxtor DiamondMax 10 120GB 8MB SATA RoHS"
+"Maxtor 6L120P0" 194 C "Maxtor DiamondMax 10 120GB 8MB ATA/133 RoHS"
+"Maxtor 6L160M0" 194 C "Maxtor DiamondMax 10 160GB 8MB SATA RoHS"
+"Maxtor 6L160P0" 194 C "Maxtor DiamondMax 10 160GB 8MB ATA/133 RoHS"
+"Maxtor 6L200M0" 194 C "Maxtor DiamondMax 10 200GB 8MB SATA RoHS"
+"Maxtor 6L200P0" 194 C "Maxtor DiamondMax 10 200GB 8MB ATA/133 RoHS"
+"Maxtor 6L250R0" 194 C "Maxtor DiamondMax 10 250GB 16MB ATA/133 RoHS"
+"Maxtor 6L250S0" 194 C "Maxtor DiamondMax 10 250GB 16MB SATA RoHS"
+"Maxtor 6L300R0" 194 C "Maxtor DiamondMax 10 300GB 16MB ATA/133 RoHS"
+"Maxtor 6L300S0" 194 C "Maxtor DiamondMax 10 300GB 16MB SATA RoHS"
+"Maxtor 6V080E0" 194 C "Maxtor DiamondMax 10 80GB 8MB SATAII RoHS"
+"Maxtor 6V160E0" 194 C "Maxtor DiamondMax 10 160GB 8MB SATAII RoHS"
+"Maxtor 6V200E0" 194 C "Maxtor DiamondMax 10 200GB 8MB SATAII RoHS"
+"Maxtor 6V250F0" 194 C "Maxtor DiamondMax 10 250GB 16MB SATAII RoHS"
+"Maxtor 6V300F0" 194 C "Maxtor DiamondMax 10 300GB 16MB SATAII RoHS"
+
+
+
+########################################
+############# Quantum drives
+########################################
+"QUANTUM FIREBALLP AS40.0" 0 C "Quantum Fireball AS40"
+"QUANTUM FIREBALL CX10.2A" 0 C "Quantum Fireball CX10.2A"
+#"QUANTUM FIREBALLlct10 20" 4 C "Quantum Fireball CT10 20GB"
+# I suspect the QUANTUM FIREBALL_TM2110A to have a sensor in field 9...
+# "QUANTUM FIREBALL_TM2110A" 9 C "Quantum Fireball TM2110A"
+
+
+
+########################################
+############# Samsung drives
+########################################
+# somenone reported a problem with the SP8004H which reports a temperature
+# 10°C below the ambient temperature
+"SAMSUNG HA(200|250)JC" 194 C "Samsung SpinPoint V120CE series"
+"SAMSUNG HD160JJ" 194 C "Samsung 160GB, 7200RPM, 8MB cache, SATA"
+"SAMSUNG HD160JJ/P" 194 C "Samsung SpinPoint P80 SD 160GB (7200RPM, 8MB cache)"
+"SAMSUNG HD[30|32|40][01]L[DJ]" 194 C "Samsung SpinPoint T133 series (300-400MB)"
+"SAMSUNG HD250KD" 194 C "Samsung SpinPoint T133 series (250 MB PATA)"
+"SAMSUNG HD321KJ" 194 C "Samsung Spinpoint T166 (7200RPM, 16MB cache) - SATA"
+"SAMSUNG HD501LJ" 194 C "Samsung HD501LJ"
+"SAMSUNG MP0(302|402|603|804)H" 194 C "Samsung SpinPoint M40 2.5inch"
+"SAMSUNG SW0434A" 0 C "Samsung SW0434A"
+"SAMSUNG SP(2001|4002|6003|8004|40A2)H" 194 C "Samsung SpinPoint P40 serie"
+"SAMSUNG SP(0612|0802|1203|1604|0812|1213|1614)N" 194 C "Samsung SpinPoint P80 serie"
+"SAMSUNG SP(0612|0802|1203|1604|0812|1213|1614)C" 194 C "Samsung SpinPoint P80 series - SATA"
+"SAMSUNG SP0411N" 194 C "Samsung SpinPoint PL40 serie"
+"SAMSUNG SP0822N" 194 C "Samsung SP0822N"
+"SAMSUNG SP(0812|1213|1614)C" 194 C "Samsung Spinpoint 160G SATA"
+"SAMSUNG SP2[05]14N" 194 C "Samsung SpinPoint P120 series (7200RPM, 8MB cache)"
+"SAMSUNG SP2[05]04C" 194 C "Samsung SpinPoint P120 series - SATA"
+"SAMSUNG SV0432A" 0 C "Samsung SV0432A"
+"SAMSUNG SV3002H" 0 C "Samsung SpinPoint V30 serie"
+"SAMSUNG SV(2001|4002|4012|6003|8004)H" 194 C "Samsung SpinPoint V40 serie"
+#"SAMSUNG SV(0221|0602|0813|1204)H" 9 C "Samsung SpinPoint V60 serie"
+#"SAMSUNG SV1204H" 194 C "Samsung 120G"
+"SAMSUNG SV(0401|0802|1203|1604)N" 194 C "Samsung SpinPoint V80 serie"
+"SAMSUNG SV4012H" 194 C "Samsung 40GB, 5400RPM, 2MB cache"
+
+########################################
+############# Seagate drives
+########################################
+"Seagate Technology 1275MB - ST31276A" 0 C "Seagate ST31276A"
+"ST3412A" 0 C "Seagate ST3412A"
+"ST38641A" 0 C "Seagate ST38641A"
+"ST310014A" 194 C "Seagate ST310014A"
+"ST310210A" 0 C "Seagate ST310210A"
+"ST310211A" 194 C "Seagate ST310211A"
+"ST310220A" 0 C "Seagate ST310220A"
+# SEAGATE ST313021A 13.0GB
+"ST313021A" 0 C "Seagate U8 ST313021A"
+"ST310240A" 0 C "Seagate Medalist 10240 Ultra ATA-3"
+"ST315320A" 194 C "Seagate ST315320A"
+"ST320423A" 0 C "Seagate U10 20423, Ultra ATA/66"
+"ST320011A" 194 C "Seagate ST320011A"
+"ST320014A" 194 C "Seagate ST320014A (5400 rpm, 20Gb)"
+"ST320410A" 194 C "Seagate ST320410A"
+"ST320413A" 194 C "Seagate ST320413A"
+"ST320414A" 194 C "Seagate ST320414A"
+"ST320420A" 194 C "Seagate Barracuda II ST320420A"
+"ST330013A" 194 C "Seagate ST330013A Barracuda ATA V 30GB, 7200 rpm"
+"ST330620A" 194 C "Seagate ST330620A"
+"ST330621A" 194 C "Seagate ST330621A"
+"ST330630A" 194 C "Seagate Barracuda ST330630A"
+"ST340014A" 194 C "Seagate Barracuda 7200.7 40Gb"
+"ST340015A" 194 C "Seagate Barracuda 5400.1 40GB"
+"ST340016A" 194 C "Seagate ST340016A"
+"ST340810A" 194 C "Seagate U Series 40810 (40Gb, Ultra ATA/100, 5400 rpm)"
+"ST340823A" 194 C "Seagate U Series 5 40823"
+"ST340824A" 194 C "Seagate Barracuda III"
+"ST360015A" 194 C "Seagate Barracuda V ST360015A"
+"ST360020A" 194 C "Seagate U Series 60020"
+"ST360021A" 194 C "Seagate Barracuda IV ST360021A"
+"ST380011A" 194 C "Seagate Barracuda 7200.7 80GB"
+"ST380012A" 194 C "Seagate ST380012A 80GB"
+"ST380013A" 194 C "Seagate Barracuda 7200.7 80GB"
+"ST380013AS" 194 C "Seagate Barracuda 7200.7 80GB (Serial ATA)"
+"ST380020A" 194 C "Seagate U Series 80020 (80Gb, Ultra ATA/100, 5400 rpm)"
+"ST380021A" 194 C "Seagate Barracuda IV ST380021A"
+"ST380022A" 194 C "Seagate Barracuda U7 80022, Ultra ATA/100"
+"ST380023A" 194 C "Seagate Barracuda V ST380023A"
+"ST380817AS" 194 C "Seagate Barracuda 7200.7 80GB - SATA"
+"ST39111A" 194 C "Seagate ST39111A (from Sun Ultra)"
+"ST3120020A" 194 C "Seagate ST3120020A"
+"ST3120022A" 194 C "Seagate Baraccuda 7200.7 120GB"
+"ST3120023A" 194 C "Seagate Barracuda V ST3120023A"
+"ST3120024A" 194 C "Seagate Barracuda V ST3120024A"
+"ST3120025ACE" 194 C "Seagate Barracuda V ST3120025ACE"
+"ST3120026A" 194 C "Seagate Barracuda V ST3120026A"
+"ST3160021A" 194 C "Seagate Barracuda 7200.7 - ST3160021A"
+"ST3160023(A|AS)" 194 C "Seagate Barracuda V ST3160023A and AS (160Gb, ATA100 or Serial ATA)"
+"ST3160827AS" 194 C "Seagate Barracuda 7200.7 160GB (Serial ATA)"
+"ST3200021A" 194 C "Seagate Barracuda 7200.7 Plus 200GB"
+"ST3200822(A|AS)" 194 C "Seagate Barracuda 7200.7 Plus 200GB (PATA or SATA)"
+"ST3200826A" 194 C "Seagate Barracuda 7200.8 200Gb"
+"ST3250623A" 194 C "Seagate Barracuda 7200.16 250GB"
+"ST3250823A" 194 C "Seagate Barracuda 7200.8 250GB"
+"ST3250823A" 194 C "Seagate Barracuda 7200.7 Plus 250GB"
+"ST3250823NS" 194 C "Seagate NL35 SATA (RAID-Edition) 7200 250GB"
+"ST3300831A" 194 C "Seagate 300GB ST3300831A"
+"ST3400832A" 194 C "Seagate Barracuda 7200.8 Plus 400GB"
+"ST3400633(A|AS)" 194 C "Seagate Barracuda 7200.7 400 GB"
+"ST3500630NS" 194 C "Seagate"
+"ST3400632NS" 194 C "Seagate"
+"ST3320620AS" 194 C "Seagate Barracuda 7200.7 320 GB"
+"ST3500630AS" 194 C "Seagate Barracuda 7200.7 500 GB"
+"ST3802110A" 194 C "Seagate Barracuda 7200.9 80 GB"
+"ST910021A" 194 C "Seagate Momentus 7200.1 100GB"
+"ST910082[35]A" 194 C "Seagate Momentus 5400.2 100GB"
+"ST9120821A" 194 C "Seagate Momentus 5400.2 120GB"
+"ST94019A" 194 C "Seagate ST94019A"
+"ST94813A" 194 C "Seagate Momentus 5400.2 40GB"
+"ST94[08]11A" 194 C "Seagate ST94011A"
+"ST960821A" 194 C "Seagate ST960821A"
+"ST960822A" 194 C "Seagate Momentus 5400.2 60GB"
+"ST96812AS" 194 C "Seagate Momentus 5400.2 60GB SATA"
+"ST9808211A" 194 C "Seagate Momentus 5400.2 80GB"
+
+########################################
+############# TOSHIBA Laptops
+########################################
+"MK4313MAT" 220 C "Toshiba MK4313MAT"
+"TOSHIBA MK1032GAX" 194 C "Toshiba MK1032GAX"
+"TOSHIBA MK1517GAP" 0 C "Toshiba MK1517GAP"
+"TOSHIBA MK2018GAS" 226 F "Toshiba MK2018GAS"
+"TOSHIBA MK2023GAS" 194 C "Toshiba MK2023GAS"
+
+"TOSHIBA MK3017GAP" 0 C "Toshiba MK3017GAP"
+"TOSHIBA MK3021GAS" 194 C "Toshiba MK3021GAS"
+"TOSHIBA MK3025GAS" 194 C "Toshiba MK3025GAS"
+
+#"TOSHIBA MK4019GAX" 222 C "Toshiba MK4019GAX"
+"TOSHIBA MK4021GAS" 194 C "Toshiba MK4021GAS"
+"TOSHIBA MK4025GAS" 194 C "Toshiba MK4025GAS 40 Go"
+"TOSHIBA MK4026GAS" 194 C "Toshiba MK4026GAS 40 Go"
+"TOSHIBA MK4032GAX" 194 C "Toshiba MK4032GAX"
+
+"TOSHIBA MK6021GAS" 194 C "Toshiba MK6021GAS"
+"TOSHIBA MK6022GAX" 194 C "Toshiba MK6022GAX"
+"TOSHIBA MK6025GAS" 194 C "Toshiba MK6025GAS"
+"TOSHIBA MK6026GAX" 194 C "Toshiba MK6026GAX"
+"TOSHIBA MK8025GAS" 194 C "Toshiba MK8025GAS"
+"TOSHIBA MK8026GAX" 194 C "Toshiba MK8026GAX"
+
+"MK4025GAS" 194 C "Toshiba MK4025GAS"
+
+
+########################################
+############# Western Digital drives
+########################################
+# WDC AC310100B and WDC AC2850F are reported not working
+# no more informations were given
+"WDC AC22000L" 0 C "Western Digital Caviar AC22000"
+"WDC AC420400D" 231 C "Western Digital Caviar AC420400D"
+"WDC AC418000D" 231 C "Western Digital AC418000D"
+"WDC WD135BA" 231 C "Western Digital WD135BA"
+
+"WDC WD100EB-00BHF0" 0 C "Western Digital 100EB-00BHF0"
+"WDC WD200BB-00AUA1" 0 C "Western Digital Caviar WD200BB"
+#"WDC WD200BB-60DGA0" 0 C "Western Digital Caviar WD200BB"
+"WDC WD300BB-00CAA0" 0 C "Western Digital WD300BB"
+"WDC WD360GD-00FNA0" 194 C "Western Digital SATA Raptor 36.7GB"
+"WDC WD400BB-00CAA0" 0 C "Western Digital 400BB-00CAA0"
+"WDC WD400BB-00J[KH]A0" 194 C "Western Digital Caviar WD400BB"
+"WDC WD400BB-23JHC0" 194 C "Western Digital 23JHC0"
+#"WDC WD400BB-00GFA0" 0 C ""
+"WDC WD400BB-55HEA0" 194 C "Western Digital Caviar WD400BB"
+"WDC WD400BB-(18CA|00DE)A0" 0 C "Western Digital Caviar WD400BB"
+"WDC WD400BB-75FJA1" 194 C "Western Digital Caviar WD400BB"
+"WDC WD400EB-00CPF0" 0 C "Western Digital 400EB-00CPF0"
+"WDC WD400JB-00(JJ|FM|FS)A0" 194 C "Western Digital Caviar 40GB Special Edition 8MB"
+"WDC WD400JB-00ETA0" 194 C "Western Digital 400JB-00ETA0"
+"WDC WD400JB-00JJC0" 194 C "Western Digital 400JB-00JJC0 40GB"
+"WDC WD400LB-00DNA0" 194 C "Western Digital 400LB-00DNA0"
+"WDC WD400UE-22HCT0" 194 C "Western Digital 40GB Notebook HDD"
+"WDC WD400VE-75HDT1" 194 C "Western Digital Scorpio 40GB"
+"WDC WD600BB-32BSA0" 0 C "Western Digital 600BB-32BSA0"
+"WDC WD600JB-00ETA0" 194 C "Western Digital 600JB-00ETA0"
+"WDC WD600LB-00DNA0" 194 C "Western Digital 60GB"
+"WDC WD600VE-75HDT0" 194 C "Western Digital 600VE-75HDT0"
+"WDC WD600VE-00HDT0" 194 C "Western Digital 600VE-00HDT0"
+"WDC WD740GD-00FL21.0" 194 C "Western Digital SATA Raptor"
+"WDC WD740GD-([05]0FL[AC]0|75FLA1)" 194 C "Western Digital SATA Raptor 74GB 8MB"
+"WDC WD800BB-00CAA1" 0 C "Western Digital WD800BB-00CAA1"
+"WDC WD800BB-(00|22)DKA0" 194 C "Western Digital WD800BB 80 Go"
+"WDC WD800BB-32CCB0" 194 C "Western Digital 800BB-32CCB0"
+"WDC WD800BB-55HEA0" 194 C "Western Digital 800BB-55HEA0"
+"WDC WD800BB-00JHA0" 194 C "Western Digital 800BB-00JHA0"
+"WDC WD800BB-00JKA0" 194 C "Western Digital 800BB-00JKA0"
+"WDC WD800BB-55JKA0" 194 C "Western Digital 800BB-55JKA0"
+"WDC WD800BB-75FRA0" 194 C "Western Digital Caviar WD800BB"
+"WDC WD800JB-00CRA1" 0 C "Western Digital Caviar WD800JB"
+"WDC WD800JB-00(ET|FM|FS)A0" 194 C "Western Digital Caviar 80GB Special Edition 8MB"
+"WDC WD800JB-00JJ[AC]0" 194 C "Western Digital WD800JB"
+"WDC WD800JD-(00|55)(HK|JR)A0" 194 C "Western Digital SATA 80GB, 8MB Cache"
+"WDC WD800JD-00(HK|JN)A0" 194 C "Western Digital SATA 80GB, 8MB Cache"
+"WDC WD800LB-(00|55)DNA0" 194 C "Western Digital Caviar WD800LB 80 Go ATA-100"
+"WDC WD800VE-07HDT0" 194 C "Western Digital 800VE-07HDT0"
+"WDC WD1200BB-00(FTA|GUA)0" 194 C "Western Digital Caviar EIDE 2MB Cache"
+"WDC WD1200JB-00(EV|FU|GV)A0" 194 C "Western Digital Caviar 120GB Special Edition 8MB"
+"WDC WD1200JB-22GVA0" 194 C "Western Digital Caviar 120GB"
+"WDC WD1200JD-00(GBB|HBC)0" 194 C "Western Digital WD1200JD"
+"WDC WD1200LB-55EDA0" 194 C "Western Digital WD1220LB"
+"WDC WD1200SB-01KB[AC]0" 194 C "Western Digital Caviar RE (Raid Edition) 120 GB"
+"WDC WD1600BB-00DWA0" 194 C "Western Digital Caviar WD1600BB"
+"WDC WD1600JB-(00EV|00FU|00GV|22GV|75GV)A0" 194 C "Western Digital Caviar 160GB Special Edition 8MB"
+"WDC WD2000BB-00FTA0" 194 C "Western Digital WD2000BB"
+"WDC WD2000JB-(00EV|32EV|34EV|00FU|00GV|55GV|98GV|00KF)A0" 194 C "Western Digital Caviar 200GB Special Edition 8MB"
+"WDC WD2000JB-00GVC0" 194 C "Western Digital WD2000JB"
+"WDC WD2000JS-00MHB1" 194 C "Western Digital SATA 200GB"
+"WDC WD2500JB-(00RE|00EV|00FU|32FU|00GV|55GV)A0" 194 C "Western Digital Caviar 250GB Special Edition 8MB"
+"WDC WD2500JB-00GVC0" 194 C "Western Digital 250GB"
+"WDC WD2500JD-(00G|32H)BB0" 194 C "Western Digital SATA Caviar 250GB Special Edition 8MB"
+"WDC WD2500JD-40HBC0" 194 C "Western Digital WD2500JD-40HBC0"
+"WDC WD2500PB-98FBA0" 194 C "Western Digital Caviar 250GB Special Edition 8MB"
+"WDC WD2500PD-00FZB1" 194 C "Western Digital WD2500PD-00FZB1"
+"WDC WD2500SD-01KCB0" 194 C "Western Digital Caviar RE 250GB 8MB"
+"WDC WD3000JB-00KFA0" 194 C "Western Digital WD3000JB"
+"WDC WD3200JB-00KFA0" 194 C "Western Digital Caviar 320GB 8MB"
+"WDC WD4000KD-00NAB0" 194 C "Western Digital Caviar SE16 400GB 16MB"
+"WDC WD4000YR-01PLB0" 194 C "Western Digital Caviar RE2 400GB 16MB"
+"WD4000YS-01MPB0" 194 C "Western Digital RE2 7200 SATA II 400 GB"
+
+# not sure for next
+# "WDC WD1200JB-00CRA1" 9 C "Western Digital 1200JB-00CRA1"
+# "WDC WD273BA" 9 C "Western Digital WD273BA"
+
+
+
+
+########################################################################################################################
+########################################################################################################################
+########################################################################################################################
+########################################################################################################################
+########################################################################################################################
+########################################################################################################################
+########################################################################################################################
+########################################################################################################################
+########################################################################################################################
+########################################################################################################################
+########################################################################################################################
+########################################################################################################################
+########################################################################################################################
+########################################################################################################################
+
+"ST3750640AS" 194 C "Seagate Barracuda 7200.10 SATA 750GB"
+"ST3750840AS" 194 C "Seagate Barracuda 7200.10 SATA 750GB"
+"ST3500630AS" 194 C "Seagate Barracuda 7200.10 SATA 500GB"
+"ST3500830AS" 194 C "Seagate Barracuda 7200.10 SATA 500GB"
+"ST3400620AS" 194 C "Seagate Barracuda 7200.10 SATA 400GB"
+"ST3400620A" 194 C "Seagate Barracuda 7200.10 400GB"
+"ST3400820AS" 194 C "Seagate Barracuda 7200.10 SATA 400GB"
+"ST3320620AS" 194 C "Seagate Barracuda 7200.10 SATA 320GB"
+"ST3320820AS" 194 C "Seagate Barracuda 7200.10 SATA 320GB"
+"ST3300620AS" 194 C "Seagate Barracuda 7200.10 SATA 300GB"
+"ST3300820AS" 194 C "Seagate Barracuda 7200.10 SATA 300GB"
+"ST3250620AS" 194 C "Seagate Barracuda 7200.10 SATA 250GB"
+"ST3250820AS" 194 C "Seagate Barracuda 7200.10 SATA 250GB"
+"ST3250410AS" 194 C "Seagate Barracuda 7200.10 SATA 250GB"
+"ST3250310AS" 194 C "Seagate Barracuda 7200.10 SATA 250GB"
+"ST3200820AS" 194 C "Seagate Barracuda 7200.10 SATA 200GB"
+"ST3160815AS" 194 C "Seagate Barracuda 7200.10 SATA 160GB"
+"ST3160215AS" 194 C "Seagate Barracuda 7200.10 SATA 160GB"
+"ST3120815AS" 194 C "Seagate Barracuda 7200.10 SATA 120GB"
+"ST3120215AS" 194 C "Seagate Barracuda 7200.10 SATA 120GB"
+"ST380815AS" 194 C "Seagate Barracuda 7200.10 SATA 80GB"
+"ST380215AS" 194 C "Seagate Barracuda 7200.10 SATA 80GB"
+"ST340815AS" 194 C "Seagate Barracuda 7200.10 SATA 40GB"
+"ST340215AS" 194 C "Seagate Barracuda 7200.10 SATA 40GB"
+"ST3300622AS" 194 C "Seagate Barracuda 7200.9 SATA2.5 300GB"
+"ST3300831A" 194 C "Seagate Barracuda 7200.8 PATA 300GB"
+
+"Maxtor 7(L|V)250(F|R|S)0" 194 C "Maxtor MaXLine III 250GB 7200rpm"
+"Maxtor 7(L|V)300(F|R|S)0" 194 C "Maxtor MaXLine III 300GB 7200rpm"
+"MAXTOR STM3320620AS" 194 C ""
+
+"WDC WD1500ADFD-00NLR1" 194 C "Western Digital Raptor 150GB"
+"WDC WD1600JS-00NCB1" 194 C "Western Digital Caviar 1600JS 160GB Sata"
+"WDC WD1600SD-01KCC0" 194 C "Western Digital Caviar RE Serial ATA series"
+"WDC WD2500JD-57HBC0" 194 C "Western Digital Caviar SE (Serial ATA) 250 GB"
+"WDC WD2500JS" 194 C "Western Digital WD2500JS"
+"WDC WD2500JS-41MVB1" 194 C "Western Digital SATAII Caviar 250GB Special Edition 8MB"
+"WDC WD2500JD-00HBB0" 194 C "Western Digital SATA 250GB"
+"WDC WD2500KS-00MJB0" 194 C "Western Digital SATA-II Caviar 250GB Special Edition 16MB"
+"WDC WD3000JS-00PDB0" 194 C "Western Digital WD3000JS"
+"WDC WD3200KS-00PFB0" 194 C ""
+"WDC WD3200JD-22KLB0" 194 C "Western Digital Caviar SE 320GB 8MB"
diff --git a/meta-oe/recipes-support/hddtemp/files/hddtemp_0.3-beta15-52.diff b/meta-oe/recipes-support/hddtemp/files/hddtemp_0.3-beta15-52.diff
new file mode 100644
index 0000000..393b5f4
--- /dev/null
+++ b/meta-oe/recipes-support/hddtemp/files/hddtemp_0.3-beta15-52.diff
@@ -0,0 +1,7545 @@
+Megapatch from debian
+
+Original URL: http://ftp.debian.org/debian/pool/main/h/hddtemp/hddtemp_0.3-beta15-52.diff.gz
+
+Upstream-Status: unmaintained
+
+--- hddtemp-0.3-beta15.orig/README
++++ hddtemp-0.3-beta15/README
+@@ -28,10 +28,7 @@
+ INFORMATION
+ ===========
+ hddtemp accesses to the SATA disks via ATA pass-through commands (defined in
+-T10/04-262r7). At the time of writing (kernel 2.6.11-rc5 has just been
+-released), kernels doesn't have support for ATA pass-through. You have to
+-update the libata driver with a newer version that could be found on:
+-http://www.kernel.org/pub/linux/kernel/people/jgarzik/libata/
++T10/04-262r7). Only kernel >= 2.6.16 have this support.
+
+ In daemon mode, hddtemp doesn't allow too much query at a time. If the interval
+ between two query is inferior to 1 minute, hddtemp will give the previous value
+--- hddtemp-0.3-beta15.orig/debian/rules
++++ hddtemp-0.3-beta15/debian/rules
+@@ -0,0 +1,110 @@
++#!/usr/bin/make -f
++# Sample debian/rules that uses debhelper.
++# GNU copyright 1997 to 1999 by Joey Hess.
++
++# Uncomment this to turn on verbose mode.
++#export DH_VERBOSE=1
++
++# These are used for cross-compiling and for saving the configure script
++# from having to guess our platform (since we know it already)
++DEB_HOST_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE)
++DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE)
++
++# Get flags from dpkg-buildflags
++CFLAGS = $(shell dpkg-buildflags --get CFLAGS)
++CPPFLAGS = $(shell dpkg-buildflags --get CPPFLAGS)
++LDFLAGS = $(shell dpkg-buildflags --get LDFLAGS)
++
++ifeq (,$(findstring nostrip,$(DEB_BUILD_OPTIONS)))
++ INSTALL_PROGRAM += -s
++endif
++
++config.status: configure
++ dh_testdir
++
++ -test -r /usr/share/misc/config.sub && \
++ cp -f /usr/share/misc/config.sub config.sub
++ -test -r /usr/share/misc/config.guess && \
++ cp -f /usr/share/misc/config.guess config.guess
++
++ CFLAGS="$(CFLAGS)" CPPFLAGS="$(CPPFLAGS)" LDFLAGS="$(LDFLAGS)" \
++ ./configure --host=$(DEB_HOST_GNU_TYPE) \
++ --build=$(DEB_BUILD_GNU_TYPE) \
++ --prefix=/usr \
++ --mandir=\$${prefix}/share/man \
++ --infodir=\$${prefix}/share/info \
++ --with-db-path=/etc/hddtemp.db
++
++build: build-arch build-indep
++
++build-arch: build-arch-stamp
++build-arch-stamp: config.status
++ dh_testdir
++ $(MAKE)
++ touch build-stamp
++
++build-indep:
++
++clean: debian-clean
++ dh_clean
++
++debian-clean:
++ dh_testdir
++ dh_testroot
++ [ ! -f Makefile ] || $(MAKE) distclean
++ rm -f po/*.gmo po/stamp-po
++ -rm -f *-stamp
++ -rm -f config.sub config.guess
++
++install: build
++ dh_testdir
++ dh_testroot
++ dh_clean -k
++ dh_installdirs
++
++ # Add here commands to install the package into debian/hddtemp.
++ $(MAKE) install DESTDIR=$(CURDIR)/debian/hddtemp
++
++ install -p -o root -g root -m 644 $(CURDIR)/debian/hddtemp.db \
++ $(CURDIR)/debian/hddtemp/etc/hddtemp.db
++
++ cp -a $(CURDIR)/contribs $(CURDIR)/debian/hddtemp/usr/share/doc/hddtemp
++ rm -f $(CURDIR)/debian/hddtemp/usr/share/doc/hddtemp/Makefile*
++
++# Build architecture-independent files here.
++binary-indep: build install
++# We have nothing to do by default.
++
++# Build architecture-dependent files here.
++binary-arch: build install
++ dh_testdir
++ dh_testroot
++ dh_installdebconf
++ dh_installdocs
++ dh_installexamples
++ dh_installmenu
++ dh_installlogcheck
++# dh_installlogrotate
++# dh_installemacsen
++# dh_installpam
++# dh_installmime
++ dh_installinit
++ dh_installcron
++ dh_installman
++ dh_installinfo
++ dh_installchangelogs ChangeLog
++ dh_link
++ dh_strip
++ dh_compress
++ dh_fixperms
++# dh_makeshlibs
++ dh_installdeb
++# dh_perl
++ dh_shlibdeps
++ dh_gencontrol
++ dh_md5sums
++ dh_builddeb
++
++binary: binary-indep binary-arch
++.PHONY: build build-arch build-indep clean binary-indep binary-arch binary install
++
+--- hddtemp-0.3-beta15.orig/debian/docs
++++ hddtemp-0.3-beta15/debian/docs
+@@ -0,0 +1,2 @@
++README
++TODO
+--- hddtemp-0.3-beta15.orig/debian/postrm
++++ hddtemp-0.3-beta15/debian/postrm
+@@ -0,0 +1,28 @@
++#! /bin/sh
++# postrm script for hddtemp
++set -e
++
++conffile="/etc/default/hddtemp"
++
++case "$1" in
++ purge)
++ rm -f $conffile
++ ;;
++ remove)
++ rm -f /usr/bin/hddtemp
++ rm -f /usr/share/man/man1/hddtemp.1.gz
++ ;;
++ upgrade|failed-upgrade|abort-install|abort-upgrade|disappear)
++ ;;
++ *)
++ echo "postrm called with unknown argument \`$1'" >&2
++ exit 1
++ ;;
++esac
++
++# dh_installdeb will replace this with shell code automatically
++# generated by other debhelper scripts.
++
++#DEBHELPER#
++
++exit 0
+--- hddtemp-0.3-beta15.orig/debian/changelog
++++ hddtemp-0.3-beta15/debian/changelog
+@@ -0,0 +1,1289 @@
++hddtemp (0.3-beta15-52) unstable; urgency=low
++
++ * Decrease hddtemp/daemon priority to medium from high (closes:
++ bug#680877).
++ * Bumped Standards-Version to 3.9.3.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Mon, 09 Jul 2012 08:12:30 +0200
++
++hddtemp (0.3-beta15-51) unstable; urgency=low
++
++ * init script: also probe for double letter drives (closes: bug#646724).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Sun, 30 Oct 2011 20:21:06 +0100
++
++hddtemp (0.3-beta15-50) unstable; urgency=low
++
++ * Convert hddtemp.db to UTF-8 (closes: bug#640899).
++ * Don't restart on reload in init.d (closes: bug#643610).
++ * Add a status option in init.d (closes: bug#643611).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Sun, 09 Oct 2011 20:16:06 +0200
++
++hddtemp (0.3-beta15-49) unstable; urgency=low
++
++ * Added Slovak debconf templates. Thanks to Slavko (closes: bug#634519).
++ * Fix a few typo in translation and enable German translation. Thanks to
++ Ville Skyttä for tha patch.
++ * Add build-arch and build-indep targets.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Tue, 30 Aug 2011 16:32:45 +0200
++
++hddtemp (0.3-beta15-48) unstable; urgency=low
++
++ * Fix backtrace support on i386.
++ * Add backtrace support on amd64.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Sun, 05 Jun 2011 00:18:46 +0200
++
++hddtemp (0.3-beta15-47) unstable; urgency=low
++
++ * Fix reading model on SATA big-endian (closes: #602307).
++ * Updated Arabic debconf templates, thanks to Ossama Khaya (closes:
++ bug#596177).
++ * Updated Swedish debconf template, thanks to Joe Hansen (closes:
++ bug#603109).
++ * Update Dutch debconf translation, thanks to Jeroen Schot (closes:
++ bug#628757).
++ * Bumped Standards-Version to 3.9.2 (no changes).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Sat, 04 Jun 2011 21:36:32 +0200
++
++hddtemp (0.3-beta15-46) unstable; urgency=low
++
++ * Don't probe /dev/sg? by default (closes: bug#531849).
++ * Add initial German translation, by Helge Kreutzmann (closes: #503710).
++ * Fix a typo in the help message (closes: #503711).
++ * Correctly zero-terminate long product ID strings (closes: #517981).
++ * Bumped Standards-Version to 3.8.4 (no changes).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Sun, 07 Feb 2010 20:24:49 +0100
++
++hddtemp (0.3-beta15-45) unstable; urgency=low
++
++ * Updated Swedish debconf templates. Thanks to Martin Bagge (closes:
++ bug#491768).
++ * Improve init script, by Cristian Ionescu-Idbohrn (closes: bug#486235).
++ * Mention /etc/init.d/hddtemp and /etc/default/hddtemp in README.Debian
++ (closes: bug#482982).
++ * Bumped Standards-Version to 3.8.0 (no changes).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Sun, 27 Jul 2008 09:44:06 +0200
++
++hddtemp (0.3-beta15-44) unstable; urgency=low
++
++ * Updated Japanese debconf templates. Thanks to Kenshi Muto (closes:
++ bug#483504).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Mon, 02 Jun 2008 10:30:58 +0200
++
++hddtemp (0.3-beta15-43) unstable; urgency=low
++
++ * Don't wake up SATA drives if not asked (closes: #479840).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Sat, 10 May 2008 13:24:18 +0200
++
++hddtemp (0.3-beta15-42) unstable; urgency=low
++
++ * Use minus instead of hyphenin manpage.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Sun, 02 Mar 2008 19:14:14 +0100
++
++hddtemp (0.3-beta15-41) unstable; urgency=low
++
++ * Fixed LSB header in init script (closes: bug#466281).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Sun, 17 Feb 2008 18:22:21 +0100
++
++hddtemp (0.3-beta15-40) unstable; urgency=low
++
++ * Added Basque debconf templates. Thanks to Piarres Beobide (closes:
++ bug#465731).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Fri, 15 Feb 2008 21:59:07 +0100
++
++hddtemp (0.3-beta15-39) unstable; urgency=low
++
++ [ Aurelien Jarno ]
++ * Bumped Standards-Version to 3.7.3 (no changes).
++
++ [ Christian Perrier ]
++ * Debconf templates and debian/control reviewed by the debian-l10n-
++ english team as part of the Smith review project. Closes: #462483
++ * [Debconf translation updates]
++ * Norwegian Bokmål. Closes: #462799
++ * German. Closes: #462843
++ * Galician. Closes: #462988
++ * Spanish. Closes: #463898
++ * Finnish. Closes: #463943
++ * Czech. Closes: #464224
++ * Russian. Closes: #464566
++ * Italian. Closes: #465069
++ * Portuguese. Closes: #465135
++ * Vietnamese. Closes: #465534
++ * French. Closes: #465650
++
++ -- Aurelien Jarno <aurel32 at debian.org> Wed, 13 Feb 2008 23:43:53 +0100
++
++hddtemp (0.3-beta15-38) unstable; urgency=low
++
++ * Fix typo in hddtemp manpage (closes: bug#444242).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Tue, 11 Dec 2007 15:17:16 +0100
++
++hddtemp (0.3-beta15-37) unstable; urgency=low
++
++ * Updated Czech debconf templates. Thanks to Miroslav Kure (closes:
++ bug#413322).
++ * Added Galician debconf templates. Thanks to Jacobo Tarrio (closes:
++ bug#412198).
++ * Clean po/stamp-po to make sure the .gmo files are regenerated (closes:
++ bug#441708).
++ * Updated Portuguese translation, thanks to Rui Branco (closes:
++ bug#418281).
++ * Updated Vietnamese debconf translation. Thanks to Clytie Siddall (closes:
++ bug#427039).
++ * Fixed man page formatting error (closes: bug#439074).
++ * Fix a segfault when using --unit and --numeric (closes: bug#412368).
++ * Exit with error code != 0 in case of error (closes: bug#423509).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Wed, 12 Sep 2007 11:36:05 +0200
++
++hddtemp (0.3-beta15-36) unstable; urgency=low
++
++ * Fix the init script, trying to kill not running daemon on shutdown
++ (closes: #411645).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Tue, 20 Feb 2007 22:04:01 +0100
++
++hddtemp (0.3-beta15-35) unstable; urgency=low
++
++ * Updated Portuguese translation, thanks to Miguel Figueire (closes:
++ bug#409491).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Tue, 20 Feb 2007 08:22:22 +0100
++
++hddtemp (0.3-beta15-34) unstable; urgency=low
++
++ * Relax SATA magic checkings (closes: #404310)
++ * Updated Swedish debconf template. Thanks to Daniel Nylander (closes:
++ bug#398788).
++ * /etc/default/hddtemp: changed SYSLOG into RUN_SYSLOG and fixed the
++ comments (closes: bug#401978).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Fri, 19 Jan 2007 00:38:27 +0100
++
++hddtemp (0.3-beta15-33) unstable; urgency=medium
++
++ * Update the description (closes: #401428).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Mon, 4 Dec 2006 06:04:38 +0100
++
++hddtemp (0.3-beta15-32) unstable; urgency=low
++
++ * Updated German debconf template. Thanks to Erik Schanze (closes:
++ bug#397209).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Mon, 27 Nov 2006 14:42:32 +0100
++
++hddtemp (0.3-beta15-31) unstable; urgency=low
++
++ * Remove the suggest on gkrellm-hddtemp (closes: bug#398938).
++ * Updated Swedish debconf template. Thanks to Daniel Nylander (closes:
++ bug#398788).
++ * Added Swedish translation. Thanks to Daniel Nylander (closes:
++ bug#398787).
++ * Added and LSB header to the init script.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Mon, 27 Nov 2006 12:14:49 +0100
++
++hddtemp (0.3-beta15-30) unstable; urgency=medium
++
++ * Remove a space in the printed temperature when a disk is not present
++ in hddtemp.db.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Thu, 19 Oct 2006 14:50:09 +0200
++
++hddtemp (0.3-beta15-29) unstable; urgency=medium
++
++ * Also consider field 194 as a temperature in Celsius if the disk
++ is not present in hddtemp.db in daemon mode (closes: bug#391870).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Mon, 9 Oct 2006 16:42:47 +0200
++
++hddtemp (0.3-beta15-28) unstable; urgency=medium
++
++ * Always consider field 194 as a temperature in Celsius if the disk
++ is not present in hddtemp.db (closes: bug#387102, #386943, #389290,
++ #387403, #389309, #387544)
++ * Updated Czech debconf template. Thanks to Miroslav Jezbera (closes:
++ bug#389244).
++ * Set urgency to medium as I really want to get this version in etch
++ (and not bother with roughly one bug report per week).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Wed, 4 Oct 2006 01:53:51 +0200
++
++hddtemp (0.3-beta15-27) unstable; urgency=low
++
++ * Depends on lsb-base (>= 3.0-3) (closes: bug#386859).
++ * Added support for Western Digital WD2000JD (closes: bug#385604).
++ * Added support for Seagate NL35 SATA (closes: bug#385187).
++ * Added support for ST3160811AS (closes: bug#385335).
++ * Added support for WD400BB-00DKA0 (closes: bug#386857).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Mon, 11 Sep 2006 00:13:15 +0200
++
++hddtemp (0.3-beta15-26) unstable; urgency=low
++
++ * Added support for SAMSUNG HD160JJ.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Sat, 26 Aug 2006 22:29:13 +0200
++
++hddtemp (0.3-beta15-25) unstable; urgency=low
++
++ * Added support for WD1200JD-00FYB0 (closes: bug#383692).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Sun, 20 Aug 2006 15:00:15 +0200
++
++hddtemp (0.3-beta15-24) unstable; urgency=low
++
++ * Updated Spanish debconf template. Thanks to Carlos Valdivia Yagüe (closes:
++ bug#383374:).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Thu, 17 Aug 2006 10:25:43 +0200
++
++hddtemp (0.3-beta15-23) unstable; urgency=low
++
++ * Added support for WDC WD3200SD-01KNB0 (closes: bug#382449).
++ * Added support for ST3400633 (closes: bug#382546).
++ * Added various Seagate 7200.10 drives, patch by Petr Vandrovec (closes:
++ bug#382490).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Fri, 11 Aug 2006 21:46:40 +0200
++
++hddtemp (0.3-beta15-22) unstable; urgency=low
++
++ * Added support for ST3320620AS (closes: bug#382300).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Thu, 10 Aug 2006 11:24:58 +0200
++
++hddtemp (0.3-beta15-21) unstable; urgency=low
++
++ * Added support for Toshiba MK1032GSX (closes: bug#382130).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Wed, 9 Aug 2006 19:27:36 +0200
++
++hddtemp (0.3-beta15-20) unstable; urgency=low
++
++ * Added support for Maxtor 6V300F0 (closes: bug#382071).
++ * Added support for Seagate ST98823AS (closes: bug#382009).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Tue, 8 Aug 2006 18:28:24 +0200
++
++hddtemp (0.3-beta15-19) unstable; urgency=low
++
++ * Added support for ST3250624AS (closes: bug#381837).
++ * Added support for WDC WD3200KS-00PFB0 (closes: bug#381837).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Mon, 7 Aug 2006 23:38:39 +0200
++
++hddtemp (0.3-beta15-18) unstable; urgency=low
++
++ * Added support for MHV2060AH.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Sat, 5 Aug 2006 21:19:56 +0200
++
++hddtemp (0.3-beta15-17) unstable; urgency=low
++
++ * Added support for WDC WD1500ADFD-00NLR0 (closes: bug#381403).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Sat, 5 Aug 2006 17:00:30 +0200
++
++hddtemp (0.3-beta15-16) unstable; urgency=low
++
++ * Updated Japanese debconf template. Thanks to Kenshi Muto (closes:
++ bug#379945).
++ * Added support for ST3808110AS and ST3160812AS (closes: bug#380478).
++ * Added support for ST3160812A (closes: bug#379701).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Sun, 30 Jul 2006 22:54:13 +0200
++
++hddtemp (0.3-beta15-15) unstable; urgency=low
++
++ * Added support for WDC WD2500JD-75HBB0 (closes: bug#379024).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Thu, 20 Jul 2006 21:47:04 +0200
++
++hddtemp (0.3-beta15-14) unstable; urgency=low
++
++ * Use lsb init-functions in init script. Thanks to Benjamin Leipold for the
++ patch (closes: bug#378118).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Fri, 14 Jul 2006 15:08:39 +0200
++
++hddtemp (0.3-beta15-13) unstable; urgency=low
++
++ * Added support for Toshiba MK8032GSX (Closes: #375486).
++ * Update the minimum kernel version (2.6.16) necessary to support
++ SATA in README.
++ * Print all warning/messages to stderr.
++ * Applied patch by Andras Korn (Closes: #374796) to allow the hddtemp
++ daemon to stay in the foreground.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Thu, 29 Jun 2006 15:11:47 +0200
++
++hddtemp (0.3-beta15-12) unstable; urgency=low
++
++ * Added Dutch debconf translation, thanks to Kurt De Bree (closes:
++ bug#370072).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Sat, 3 Jun 2006 19:45:21 +0200
++
++hddtemp (0.3-beta15-11) unstable; urgency=low
++
++ * Updated Danish debconf template. Thanks to Claus Hindsgaul (closes:
++ bug#368045).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Fri, 19 May 2006 17:25:32 +0000
++
++hddtemp (0.3-beta15-10) unstable; urgency=low
++
++ * Updated French debconf translation, thanks to Jean-Luc Coulon (closes:
++ bug#367540).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Tue, 16 May 2006 21:42:39 +0200
++
++hddtemp (0.3-beta15-9) unstable; urgency=low
++
++ * debian/templates: Changed How often into in interval. (closes: bug#367382).
++ * debian/templates: fixed the templates to make lintian happy.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Mon, 15 May 2006 20:21:49 +0200
++
++hddtemp (0.3-beta15-8) unstable; urgency=low
++
++ * Added support for SAMSUNG HD300LJ (closes: bug#367250).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Sun, 14 May 2006 20:08:31 +0200
++
++hddtemp (0.3-beta15-7) unstable; urgency=low
++
++ * Added support for HDS722516VLSA80 (closes: bug#366742).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Thu, 11 May 2006 05:46:24 +0200
++
++hddtemp (0.3-beta15-6) unstable; urgency=low
++
++ * Added support for FUJITSU MHV2100BH (closes: bug#366388).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Wed, 10 May 2006 06:29:54 +0200
++
++hddtemp (0.3-beta15-5) unstable; urgency=low
++
++ * Added support for WDC WD740GD-00FLA1 (closes: bug#366021).
++ * Bumped Standards-Version to 3.7.2 (no changes).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Thu, 4 May 2006 18:38:15 +0200
++
++hddtemp (0.3-beta15-4) unstable; urgency=low
++
++ * Fix a crash in daemon (syslog) mode when the hard disk is not known
++ (closes: bug#365605).
++ * Added support for WD1200JB-00REA0.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Wed, 3 May 2006 20:27:11 +0200
++
++hddtemp (0.3-beta15-3) unstable; urgency=low
++
++ * Added support for WDC WD800JD-75JNC0 (closes: bug#365359).
++ * Added support for WDC WD2500KS and WDC WD2500YD.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Tue, 2 May 2006 21:49:37 +0200
++
++hddtemp (0.3-beta15-2) unstable; urgency=low
++
++ * Updated database for Maxtors MaxLineIII series drives (closes:
++ bug#365011).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Thu, 27 Apr 2006 14:45:22 +0200
++
++hddtemp (0.3-beta15-1) unstable; urgency=low
++
++ * New upstream version.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Thu, 27 Apr 2006 05:25:06 +0200
++
++hddtemp (0.3-beta14-12) unstable; urgency=low
++
++ * Added Portuguese translation, thanks to Miguel Figueire (closes:
++ bug#361505).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Tue, 11 Apr 2006 00:38:51 +0200
++
++hddtemp (0.3-beta14-11) unstable; urgency=low
++
++ * Added support for WDC WD2500PD-00FZB1, WDC WD2500SD-01KCB0, WDC
++ WD1200JD-00HBC0 and WDC WD4000YR-01PLB0 (closes: bug#357804).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Sat, 25 Mar 2006 20:29:42 +0100
++
++hddtemp (0.3-beta14-10) unstable; urgency=low
++
++ * Use F for fahrenheit.
++ * Added support for Hitachi DK23EA-20B (closes: bug#355763).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Sat, 18 Mar 2006 11:39:20 +0100
++
++hddtemp (0.3-beta14-9) unstable; urgency=low
++
++ * Update hddtemp.db (closes: bug#355469).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Mon, 6 Mar 2006 00:40:35 +0100
++
++hddtemp (0.3-beta14-8) unstable; urgency=low
++
++ * Don't flood syslog if the system clock wraps (closes: bug#354260).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Fri, 24 Feb 2006 21:32:36 +0100
++
++hddtemp (0.3-beta14-7) unstable; urgency=low
++
++ * Correctly initialize the structure dsk.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Sat, 4 Feb 2006 22:01:07 +0100
++
++hddtemp (0.3-beta14-6) unstable; urgency=low
++
++ * Added support for TOSHIBA MK4026GAX.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Sun, 11 Dec 2005 21:13:06 +0100
++
++hddtemp (0.3-beta14-5) unstable; urgency=low
++
++ * Added Swedish translation of hddtemp. Thanks to Daniel Nylander (close:
++ bug#337117).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Thu, 3 Nov 2005 01:56:26 +0100
++
++hddtemp (0.3-beta14-4) unstable; urgency=low
++
++ * Fixed the package device patch.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Thu, 27 Oct 2005 03:18:43 +0200
++
++hddtemp (0.3-beta14-3) unstable; urgency=low
++
++ * Don't try to read temperature from packet devices drives (closes:
++ bug#316750, bug#335571).
++ * Verify the response length when calling modesense (closes:
++ bug#278345).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Thu, 27 Oct 2005 01:02:21 +0200
++
++hddtemp (0.3-beta14-2) unstable; urgency=low
++
++ * Added Swedish debconf translation. Thanks to Daniel Nylander (closes:
++ bug#333713).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Fri, 14 Oct 2005 11:22:05 +0200
++
++hddtemp (0.3-beta14-1) unstable; urgency=low
++
++ * New upstream version.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Wed, 21 Sep 2005 14:48:43 +0200
++
++hddtemp (0.3-beta13-23) unstable; urgency=low
++
++ * Added SAMSUNG SP2014N disk to the database.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Wed, 14 Sep 2005 11:27:22 +0200
++
++hddtemp (0.3-beta13-22) unstable; urgency=low
++
++ * Updated hddtemp.db (closes: bug#326180, bug#326181).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Tue, 6 Sep 2005 03:51:29 +0200
++
++hddtemp (0.3-beta13-21) unstable; urgency=low
++
++ * Added TOSHIBA MK4026GAX disk to the database (closes: bug#325702).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Wed, 31 Aug 2005 11:16:55 +0200
++
++hddtemp (0.3-beta13-20) unstable; urgency=low
++
++ * Added Arabic debconf translation. Thanks to Mohammed Adnène Trojette
++ (closes: bug#320766).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Mon, 1 Aug 2005 15:40:56 +0200
++
++hddtemp (0.3-beta13-19) unstable; urgency=low
++
++ * Fixed DISKS_NOPROBE when no other disks are detected.
++ * Added a logcheck rule to ignore sleeping drives (closes: bug#316613).
++ * Bumped Standards-Version to 3.6.2 (no changes).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Wed, 6 Jul 2005 19:15:16 +0200
++
++hddtemp (0.3-beta13-18) unstable; urgency=low
++
++ * Added DISKS_NOPROBE option to the /etc/default/hddtemp (closes:
++ bug#316270).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Wed, 29 Jun 2005 22:13:53 +0200
++
++hddtemp (0.3-beta13-17) unstable; urgency=low
++
++ * Updated database.
++ * Added support for Western Digital Caviar WD800BB (closes: bug#312247).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Thu, 9 Jun 2005 23:16:25 +0200
++
++hddtemp (0.3-beta13-16) unstable; urgency=low
++
++ * Updated Vietnamese debconf translation. Thanks to Clytie Siddall (closes:
++ bug#311893).
++ * Fixed a typo in the debconf template. Thanks to Clytie Siddall (closes:
++ bug#311894).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Sat, 4 Jun 2005 17:03:31 +0200
++
++hddtemp (0.3-beta13-15) unstable; urgency=low
++
++ * Updated German debconf translation. Thanks to Erik Schanze (closes:
++ bug#311716).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Fri, 3 Jun 2005 00:41:00 +0200
++
++hddtemp (0.3-beta13-14) unstable; urgency=low
++
++ * Added SV4012H to the database.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Tue, 24 May 2005 00:54:01 +0200
++
++hddtemp (0.3-beta13-13) unstable; urgency=low
++
++ * Added WD800BB-00JHA0 to the database (closes: bug#310301).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Mon, 23 May 2005 01:08:43 +0200
++
++hddtemp (0.3-beta13-12) unstable; urgency=low
++
++ * Added HDS722512VLAT80 to the database (closes: bug#309011).
++ * Added Vietnamese debconf translation. Thanks to Clytie Siddall (closes:
++ bug#309451).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Mon, 16 May 2005 16:58:00 +0200
++
++hddtemp (0.3-beta13-11) unstable; urgency=low
++
++ * Added WD2500JB-55GVA0 to the database (closes: bug#307673).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Wed, 4 May 2005 23:47:12 +0200
++
++hddtemp (0.3-beta13-10) unstable; urgency=high
++
++ * Daemonization fixed (closes: bug#307113).
++ * Added HDS722525VLSA80 to the database (closes: bug#306691).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Mon, 2 May 2005 01:01:54 +0200
++
++hddtemp (0.3-beta13-9) unstable; urgency=low
++
++ * Remove /etc/logcheck.ignore.workstation/hddtemp in postinst.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Fri, 22 Apr 2005 18:35:58 +0200
++
++hddtemp (0.3-beta13-8) unstable; urgency=low
++
++ * Really applied Danish debconf template (closes: bug#302353).
++ * Updated Czech debconf template. Thanks to Miroslav Jezbera (closes:
++ bug#304716).
++ * Updated French debconf template. Thanks to Jean-Luc Coulon (closes:
++ bug#303061).
++ * Added WD2000JB-32EVA0 to hddtemp.deb (closes: bug#302760).
++ * Fixed logcheck ignore files (closes: bug#304110).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Fri, 15 Apr 2005 06:26:34 +0200
++
++hddtemp (0.3-beta13-7) unstable; urgency=low
++
++ * Updated Danish debconf template. Thanks to Claus Hindsgaul (closes:
++ bug#302353).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Fri, 15 Apr 2005 06:15:19 +0200
++
++hddtemp (0.3-beta13-6) unstable; urgency=low
++
++ * Updated Japanese debconf template. Thanks to Kenshi Muto (closes:
++ bug#302322).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Thu, 31 Mar 2005 12:26:56 +0200
++
++hddtemp (0.3-beta13-5) unstable; urgency=low
++
++ * Fixed French debconf template.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Wed, 30 Mar 2005 22:59:34 +0200
++
++hddtemp (0.3-beta13-4) unstable; urgency=low
++
++ * debian/templates: s/gkrellm-hdtemp/gkrellm/g (closes: bug#302178).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Wed, 30 Mar 2005 15:21:10 +0200
++
++hddtemp (0.3-beta13-3) unstable; urgency=medium
++
++ * Don't listen on socket if only syslog is choosen in debconf. Thanks to
++ Mario Holbe for the patch (closes: bug#302065).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Wed, 30 Mar 2005 01:25:04 +0200
++
++hddtemp (0.3-beta13-2) unstable; urgency=medium
++
++ * Try to detect cdrom drives using the ide-scsi driver (closes:
++ bug#302061).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Wed, 30 Mar 2005 00:38:49 +0200
++
++hddtemp (0.3-beta13-1) unstable; urgency=medium
++
++ * New upstream version which contains the same code as in the previous
++ Debian package.
++ * Use SG_IO only when available (closes: bug#300679).
++ * Added syslog option in debconf (closes: bug#300332).
++ * Fixed the manpage (closes: bug#300332).
++ * Only disable SCSI exceptions if they are already enabled (closes:
++ bug#278345).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Tue, 29 Mar 2005 15:56:03 +0200
++
++hddtemp (0.3-beta12-16) unstable; urgency=low
++
++ * Verify SATA magics in the ATA pass through subroutine.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Sun, 27 Feb 2005 16:51:48 +0100
++
++hddtemp (0.3-beta12-15) unstable; urgency=low
++
++ * Change the way SATA disks are detected, so that there is no more
++ SCSI errors with SCSI disks.
++ * Print SCSI disks name in a smarter way.
++ * Updated database.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Fri, 25 Feb 2005 22:59:36 +0100
++
++hddtemp (0.3-beta12-14) unstable; urgency=low
++
++ * Converted SCSI subroutines to SG_IO (closes: bug#235422, bug#275612,
++ bug#292205).
++ * Added support for SATA (closes: bug#227409). A kernel patch for
++ SATA is still need (see /usr/share/doc/hddtemp/README).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Fri, 25 Feb 2005 02:16:57 +0100
++
++hddtemp (0.3-beta12-13) unstable; urgency=low
++
++ * Don't display an error message if /proc/sys/dev/cdrom/info doesn't
++ exist (systems without CDROM drives) (closes: bug#295814).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Fri, 18 Feb 2005 12:42:18 +0100
++
++hddtemp (0.3-beta12-12) unstable; urgency=low
++
++ * Added Hitachi Deskstar 7K80 40G and 80GB disks.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Sun, 6 Feb 2005 17:49:15 +0100
++
++hddtemp (0.3-beta12-11) unstable; urgency=low
++
++ * Uses /proc/sys/dev/cdrom/info instead of hardcoded paths to detect CDROM
++ drives (closes: bug#293542).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Fri, 4 Feb 2005 11:15:37 +0100
++
++hddtemp (0.3-beta12-10) unstable; urgency=low
++
++ * Added a README.Debian to explain why the init script could not found
++ some disks.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Tue, 25 Jan 2005 16:46:53 +0100
++
++hddtemp (0.3-beta12-9) unstable; urgency=low
++
++ * Updated Brasilian translation. Thanks to Tiago Bortoletto Vaz (closes:
++ bug#283832).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Wed, 1 Dec 2004 21:40:42 +0100
++
++hddtemp (0.3-beta12-8) unstable; urgency=low
++
++ * Updated hddtemp.db.
++ * Added MHT2060AH drive (closes: bug#280805).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Wed, 1 Dec 2004 19:19:37 +0100
++
++hddtemp (0.3-beta12-7) unstable; urgency=low
++
++ * Updated German debconf translation. Thanks to Erik Schanze (closes:
++ bug#282280).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Sun, 21 Nov 2004 16:22:41 +0100
++
++hddtemp (0.3-beta12-6) unstable; urgency=low
++
++ * Don't abord the script if /dev/cdrom doesn't exists.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Mon, 25 Oct 2004 14:46:42 +0000
++
++hddtemp (0.3-beta12-5) unstable; urgency=low
++
++ * Added a patch to allow temperatures to be logged to syslog (closes:
++ bug#271508).
++ * Added hddtemp-all.sh to contribs. Thanks to Javier Fernández-Sanguino
++ Peña (closes: bug#276444).
++ * /etc/init.d/hddtemp: skip CD and DVD drives.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Sun, 24 Oct 2004 17:30:34 +0200
++
++hddtemp (0.3-beta12-4) unstable; urgency=low
++
++ * Print "done." in the init script when stopping hddtemp (closes:
++ bug#275952).
++ * Updated hddtemp.db with the latest available version.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Tue, 12 Oct 2004 10:10:01 +0100
++
++hddtemp (0.3-beta12-3) unstable; urgency=medium
++
++ * Added support for WDC 200GB SE (closes: bug#275105).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Thu, 7 Oct 2004 21:01:15 +0200
++
++hddtemp (0.3-beta12-2) unstable; urgency=low
++
++ * Added support for Maxtor MaXLine Plus II 250GB (closes: bug#274596).
++ * Added support for Travelstar 5K80 series (closes: bug#274671).
++ * Removed init message when the daemon is disabled.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Sun, 3 Oct 2004 19:40:23 +0200
++
++hddtemp (0.3-beta12-1) unstable; urgency=low
++
++ * New upstream version.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Sat, 2 Oct 2004 01:47:19 +0200
++
++hddtemp (0.3-beta11-17) unstable; urgency=low
++
++ * Detect sleeping drives in the init script (closes: bug#269462).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Wed, 1 Sep 2004 18:49:35 +0200
++
++hddtemp (0.3-beta11-16) unstable; urgency=low
++
++ * Added support for Samsung SpinPoint PL40 serie.
++ * Added support for Western Digital 250GB Special Edition 8MB (closes:
++ bug#269342).
++ * Added support for Maxtor DiamondMax Plus 40 drives (closes:
++ bug#269346).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Wed, 1 Sep 2004 11:29:55 +0200
++
++hddtemp (0.3-beta11-15) unstable; urgency=low
++
++ * Added Danish debconf translation. Thanks to Claus Hindsgaul (closes:
++ bug#267551).
++ * Added support for Western Digital 160GB Special Edition 8MB (closes:
++ bug#267492).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Tue, 31 Aug 2004 11:23:43 +0200
++
++hddtemp (0.3-beta11-14) unstable; urgency=medium
++
++ * Let the kernel decide if we can access the device or not (closes:
++ bug#262742).
++ * Added an option to wake-up the driver if need (closes: #255308).
++ * Added IPv6 support.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Mon, 16 Aug 2004 15:36:00 +0200
++
++hddtemp (0.3-beta11-13) unstable; urgency=low
++
++ * Added Czech debconf translation. Thanks to Miroslav Jezbera (closes:
++ bug#261284).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Sat, 31 Jul 2004 16:18:17 +0200
++
++hddtemp (0.3-beta11-12) unstable; urgency=low
++
++ * Fixed manpage installation (closes: bug#258048, #258101).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Thu, 8 Jul 2004 02:08:00 +0200
++
++hddtemp (0.3-beta11-11) unstable; urgency=low
++
++ * Print WARNING messages on stderr (closes: bug#254940).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Fri, 18 Jun 2004 00:17:08 +0200
++
++hddtemp (0.3-beta11-10) unstable; urgency=low
++
++ * If a debconf answer is empty, ignore it (closes: bug#247026).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Tue, 4 May 2004 01:48:26 +0200
++
++hddtemp (0.3-beta11-9) unstable; urgency=low
++
++ * The "Welcome to the 10 new EU members" release.
++ * Added --retry parameter when calling start-stop-daemon (closes:
++ bug#246028).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Sat, 1 May 2004 00:49:45 +0200
++
++hddtemp (0.3-beta11-8) unstable; urgency=low
++
++ * Added support for Samsung P80 SATA drives (closes: bug#243464).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Tue, 13 Apr 2004 17:34:30 +0200
++
++hddtemp (0.3-beta11-7) unstable; urgency=low
++
++ * Added support for Hitachi Deskstar 7K250 (closes: bug#241493).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Sun, 11 Apr 2004 16:37:51 +0200
++
++hddtemp (0.3-beta11-6) unstable; urgency=low
++
++ * Added support for Western Digital WD1600JB-00FUA0 disk (closes:
++ bug#237983).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Tue, 16 Mar 2004 13:14:19 +0100
++
++hddtemp (0.3-beta11-5) unstable; urgency=low
++
++ * Minor changes to debian/postinst script.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Sun, 8 Feb 2004 00:27:59 +0100
++
++hddtemp (0.3-beta11-4) unstable; urgency=low
++
++ * Updated description (closes: bug#230507).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Sun, 1 Feb 2004 17:37:58 +0100
++
++hddtemp (0.3-beta11-3) unstable; urgency=low
++
++ * Don't include asm headers on architectures that don't support
++ backtracing.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Sun, 25 Jan 2004 21:57:49 +0100
++
++hddtemp (0.3-beta11-2) unstable; urgency=low
++
++ * Included upstream ChangeLog (closes: bug#226329).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Tue, 6 Jan 2004 03:16:37 +0100
++
++hddtemp (0.3-beta11-1) unstable; urgency=low
++
++ * New upstream version.
++ * Updated the database to version 03C.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Fri, 2 Jan 2004 10:05:21 +0100
++
++hddtemp (0.3-beta10-2) unstable; urgency=low
++
++ * Disable backtracing on non-i386 architectures.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Mon, 15 Dec 2003 09:19:48 +0100
++
++hddtemp (0.3-beta10-1) unstable; urgency=low
++
++ * New upstream version.
++ * Updated debian/copyright.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Mon, 15 Dec 2003 08:24:37 +0100
++
++hddtemp (0.3-beta9-2) unstable; urgency=low
++
++ * Moved ja.po in the right directory.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Fri, 12 Dec 2003 09:31:19 +0100
++
++hddtemp (0.3-beta9-1) unstable; urgency=low
++
++ * New upstream version.
++ * Updated the database to version 03B.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Fri, 12 Dec 2003 09:21:16 +0100
++
++hddtemp (0.3-beta8-7) unstable; urgency=low
++
++ * Added po debconf translations. Thanks to Kenshi Muto. (closes:
++ bug#211954)
++
++ -- Aurelien Jarno <aurel32 at debian.org> Sun, 21 Sep 2003 14:03:19 +0200
++
++hddtemp (0.3-beta8-6) unstable; urgency=low
++
++ * Remove the link to /usr/sbin/hddtemp in /usr/bin when removing the
++ package (closes: bug#210609).
++ * Updated Policy standard compliance to 3.6.1 (no changes).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Fri, 12 Sep 2003 16:06:56 +0200
++
++hddtemp (0.3-beta8-5) unstable; urgency=low
++
++ * Removed the single-quoting around the -s parameter in the init script
++ (closes: bug#208542).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Wed, 3 Sep 2003 19:02:24 +0200
++
++hddtemp (0.3-beta8-4) unstable; urgency=medium
++
++ * Don't modify the config file in the config script (closes: bug#203583).
++ * Urgency set to medium as the bug breaks upgrade.
++ * The init script also stop manually started daemons.
++ * Added a small patch to make sure hddtemp could not be started in daemon
++ mode by a normal user even if it is SUID root.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Tue, 2 Sep 2003 14:52:03 +0200
++
++hddtemp (0.3-beta8-3) unstable; urgency=low
++
++ * Don't strip the comments from the config file when installing the
++ package.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Mon, 1 Sep 2003 18:51:33 +0200
++
++hddtemp (0.3-beta8-2) unstable; urgency=low
++
++ * Fixed a typo in the manpage. Thanks to Carlos Valdivia Yagüe. (Closes:
++ bug#205947).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Tue, 19 Aug 2003 09:19:04 +0200
++
++hddtemp (0.3-beta8-1) unstable; urgency=low
++
++ * New upstream version.
++ * Recoded the changelog in UTF-8.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Tue, 12 Aug 2003 01:14:19 +0200
++
++hddtemp (0.3-beta7-6) unstable; urgency=low
++
++ * Fixed config and postinst scripts (closes: bug#203583).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Tue, 5 Aug 2003 09:16:11 +0200
++
++hddtemp (0.3-beta7-5) unstable; urgency=low
++
++ * Fixed a typo in /etc/init.d/hddtemp (closes: bug#203441).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Wed, 30 Jul 2003 06:29:45 +0200
++
++hddtemp (0.3-beta7-4) unstable; urgency=low
++
++ * Changed the DAEMON parameter in /etc/default/hddtemp to RUN_DAEMON
++ (closes: bug#203107).
++ * Updated the database to version 036.
++ * Updated Policy standard compliance to 3.6.0.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Mon, 28 Jul 2003 02:32:00 +0200
++
++hddtemp (0.3-beta7-3) unstable; urgency=low
++
++ * Updated es debconf translations. Thanks to Carlos Valdivia Yagüe.
++ (closes: bug#198450).
++ * Updated the database to version 033.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Tue, 24 Jun 2003 01:12:00 +0200
++
++hddtemp (0.3-beta7-2) unstable; urgency=low
++
++ * Updated fr debconf translations. Thanks to Michel Grentzin.
++ (closes: bug#198155)
++ * Added pt_BR debconf translations. Thanks to Andre Luis Lopes.
++ (closes: bug#198350)
++
++ -- Aurelien Jarno <aurel32 at debian.org> Sun, 22 Jun 2003 02:55:59 +0200
++
++hddtemp (0.3-beta7-1) unstable; urgency=low
++
++ * New upstream version with i18n support.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Mon, 16 Jun 2003 22:54:25 +0200
++
++hddtemp (0.3-beta6-9) unstable; urgency=low
++
++ * Updated the database to version 032.
++ * Unmark some untranslatable strings in the master templates file. (closes:
++ bug#197642).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Mon, 16 Jun 2003 19:32:07 +0200
++
++hddtemp (0.3-beta6-8) unstable; urgency=low
++
++ * Updated the database to version 030.
++ * Updated fr debconf translations. Thanks to Michel Grentzin.
++ (closes: bug#196765)
++
++ -- Aurelien Jarno <aurel32 at debian.org> Mon, 9 Jun 2003 20:37:46 +0200
++
++hddtemp (0.3-beta6-7) unstable; urgency=low
++
++ * Changed priority for debconf questions to more reasonable values.
++ * Updated the database to version 02F.
++ * Updated Policy standard compliance to 3.5.10.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Thu, 22 May 2003 23:43:24 +0200
++
++hddtemp (0.3-beta6-6) unstable; urgency=low
++
++ * Don't mark /etc/default/hddtemp as a conffile, handle it entirely
++ in maintainer scripts (closes: bug#193466).
++ * Pass --ok-nodo argument to start-stop-daemon in init script when
++ stopping hddtemp (closes: bug#193622).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Sun, 18 May 2003 13:09:48 +0200
++
++hddtemp (0.3-beta6-5) unstable; urgency=low
++
++ * Updated the database to version 02E.
++ * Don't save the fact that the daemon is running or not in debconf, but
++ rather in /etc/default/hddemp.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Sun, 11 May 2003 15:06:47 +0200
++
++hddtemp (0.3-beta6-4) unstable; urgency=low
++
++ * Updated the upstream project homepage in debian/copyright (closes:
++ bug#190960).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Sun, 27 Apr 2003 17:46:53 +0200
++
++hddtemp (0.3-beta6-3) unstable; urgency=low
++
++ * Updated the upstream project homepage in the description (closes:
++ bug#190929).
++ * Updated the database to version 02B.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Sun, 27 Apr 2003 11:40:14 +0200
++
++hddtemp (0.3-beta6-2) unstable; urgency=low
++
++ * Added port and separator options to /etc/default/hddtemp.
++ * Added -l option to the manpage.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Thu, 3 Apr 2003 09:44:58 +0200
++
++hddtemp (0.3-beta6-1) unstable; urgency=low
++
++ * New upstream version.
++ * Updated database.
++ * Updated Policy standard compliance to 3.5.9.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Wed, 2 Apr 2003 22:54:01 +0200
++
++hddtemp (0.3-beta5-1) unstable; urgency=low
++
++ * New upstream version.
++ * Updated database.
++ * Added an option to listen on a specific interface (closes: bug#186062).
++ * Changed name displayed by /etc/init.d/hddtemp (closes: bug#187041).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Tue, 1 Apr 2003 02:24:53 +0200
++
++hddtemp (0.3-beta4-2) unstable; urgency=low
++
++ * The "I have uploaded the wrong version" release.
++ * Fixed a bug in i18n.c. (closes: bug#185328).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Tue, 18 Mar 2003 20:32:03 +0100
++
++hddtemp (0.3-beta4-1) unstable; urgency=low
++
++ * New upstream version.
++ * Updated database.
++ * Improved /etc/init.d/hddtemp and added a config file in
++ /etc/default (Closes: bug#183843). Thanks to Greg Miller.
++ * Fixed a bug in i18n.c.
++ * Added homepage and author to the description.
++ * Debconf templates are now managed with po-debconf.
++ * Uses debian/compat instead of DH_COMPAT.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Mon, 17 Mar 2003 00:29:12 +0100
++
++hddtemp (0.3-beta3-3) unstable; urgency=low
++
++ * Added patch to allow local port reuse in TIME_WAIT.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Sat, 25 Jan 2003 01:43:21 +0100
++
++hddtemp (0.3-beta3-2) unstable; urgency=low
++
++ * Don't fail at postinst stage if daemon failed to start. (closes:
++ bug#177660)
++
++ -- Aurelien Jarno <aurel32 at debian.org> Fri, 24 Jan 2003 21:21:41 +0100
++
++hddtemp (0.3-beta3-1) unstable; urgency=low
++
++ * New upstream version including all the previous patches plus some fixes.
++ * Updated database.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Sun, 19 Jan 2003 21:27:30 +0100
++
++hddtemp (0.3-beta2-4) unstable; urgency=low
++
++ * Added patch from Julien Blache to fix a lot of spelling mistakes.
++ Thanks !
++
++ -- Aurelien Jarno <aurel32 at debian.org> Sun, 19 Jan 2003 09:55:47 +0100
++
++hddtemp (0.3-beta2-3) unstable; urgency=low
++
++ * Added an option to print only the temperature. Thanks to Julien Blache
++ for the patch. (closes: bug#176395)
++ * Fixed some warnings introduced by gcc-3.2.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Sun, 12 Jan 2003 12:30:49 +0100
++
++hddtemp (0.3-beta2-2) unstable; urgency=low
++
++ * Merged hddtemp and hddtemp-daemon and added a debconf question
++ because the package was refused by the ftpmaster.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Wed, 8 Jan 2003 21:48:09 +0100
++
++hddtemp (0.3-beta2-1) unstable; urgency=low
++
++ * New beta version.
++ * Added daemon mode init script to the new package hddtemp-daemon.
++ * Updated Policy standard compliance to 3.5.8.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Sat, 4 Jan 2003 10:04:16 +0100
++
++hddtemp (0.2-18) unstable; urgency=low
++
++ * Updated database (version 021).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Sat, 28 Dec 2002 16:59:39 -0500
++
++hddtemp (0.2-17) unstable; urgency=low
++
++ * Fixed copyright file.
++ * Removed debian/conffiles, this is handled by dh_installdeb automatically ;
++ otherwise we end up with each conffile being listed twice...
++
++ -- Aurelien Jarno <aurel32 at debian.org> Tue, 17 Dec 2002 01:39:02 +0100
++
++hddtemp (0.2-16) unstable; urgency=low
++
++ * Updated database (version 01f).
++
++ -- Aurelien Jarno <aurel32 at debian.org> Tue, 17 Dec 2002 00:40:07 +0100
++
++hddtemp (0.2-15) unstable; urgency=low
++
++ * Updated database (version 01D).
++ * Added disk model IC35L040AVVN07-0 (closes: bug#172117). Thanks to Henrique
++ de Moraes Holschuh.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Sat, 7 Dec 2002 16:47:41 +0100
++
++hddtemp (0.2-14) unstable; urgency=low
++
++ * Corrected a bug affecting the display of the degree sign.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Thu, 26 Sep 2002 01:29:10 +0200
++
++hddtemp (0.2-13) unstable; urgency=low
++
++ * Added support for other encodings than iso-8859-1. (closes:bug#158106)
++ * debian/hddtemp.1: corrected description of -f option.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Wed, 25 Sep 2002 14:26:20 +0200
++
++hddtemp (0.2-12) unstable; urgency=low
++
++ * Updated database.
++ * Updated Policy standard compliance to 3.5.7
++
++ -- Aurelien Jarno <aurel32 at debian.org> Wed, 11 Sep 2002 14:21:49 +0200
++
++hddtemp (0.2-11) unstable; urgency=low
++
++ * Updated database.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Wed, 14 Aug 2002 23:01:31 +0200
++
++hddtemp (0.2-10) unstable; urgency=low
++
++ * Updated database. (closes: bug#149313)
++
++ -- Aurelien Jarno <aurel32 at debian.org> Sat, 15 Jun 2002 00:00:48 +0200
++
++hddtemp (0.2-9) unstable; urgency=low
++
++ * Corrected a bug affecting the display of the degree sign on some systems.
++ (closes: bug#147136, #147138)
++
++ -- Aurelien Jarno <aurel32 at debian.org> Tue, 11 Jun 2002 19:34:03 +0200
++
++hddtemp (0.2-8) unstable; urgency=low
++
++ * Corrected debconf template. (closes: bug#148146)
++ * Updated HDD database.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Sat, 25 May 2002 17:11:16 +0200
++
++hddtemp (0.2-7) unstable; urgency=low
++
++ * Corrected the man page.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Sun, 19 May 2002 23:54:39 +0200
++
++hddtemp (0.2-6) unstable; urgency=low
++
++ * Updated HDD database.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Sat, 18 May 2002 13:33:02 +0200
++
++hddtemp (0.2-5) unstable; urgency=low
++
++ * Updated HDD database.
++ * Updated the man page.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Mon, 13 May 2002 06:40:08 +0200
++
++hddtemp (0.2-4) unstable; urgency=low
++
++ * Moved /usr/share/hddtemp/hddtemp.db to /etc/hddtemp.db as conffile.
++ (closes: bug#146738)
++
++ -- Aurelien Jarno <aurel32 at debian.org> Sun, 12 May 2002 19:50:23 +0200
++
++hddtemp (0.2-3) unstable; urgency=low
++
++ * Added de debconf translations.
++ * Updated HDD database.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Sun, 12 May 2002 17:15:28 +0200
++
++hddtemp (0.2-2) unstable; urgency=low
++
++ * Fixed typos and erroneous statement in description. (closes: bug#146551)
++ * Fixed manpage. (closes: bug#146554)
++ * A symlink to /usr/bin is made when installing hddtemp SUID root.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Sat, 11 May 2002 15:54:42 +0200
++
++hddtemp (0.2-1) unstable; urgency=low
++
++ * Initial Release. (closes: bug#145611)
++
++ -- Aurelien Jarno <aurel32 at debian.org> Thu, 9 May 2002 14:50:35 +0200
++
+--- hddtemp-0.3-beta15.orig/debian/templates
++++ hddtemp-0.3-beta15/debian/templates
+@@ -0,0 +1,63 @@
++# These templates have been reviewed by the debian-l10n-english
++# team
++#
++# If modifications/additions/rewording are needed, please ask
++# debian-l10n-english at lists.debian.org for advice.
++#
++# Even minor modifications require translation updates and such
++# changes should be coordinated with translators and reviewers.
++
++Template: hddtemp/SUID_bit
++Type: boolean
++Default: false
++_Description: Should /usr/sbin/hddtemp be installed SUID root?
++ You have the option of installing hddtemp with the SUID bit set,
++ allowing it to be run (reporting hard drive temperatures) by regular
++ users and not only the superuser.
++ .
++ This could potentially allow hddtemp to be used during an attack
++ against the computer's security. If in doubt, do not choose this option.
++ .
++ This setting can be modified later by running 'dpkg-reconfigure hddtemp'.
++
++Template: hddtemp/syslog
++Type: string
++Default: 0
++_Description: Interval between hard drive temperature checks:
++ The temperature of the hard drive(s) can be logged by hddtemp via
++ the generic system logging interface.
++ .
++ Please enter a value in seconds corresponding to the interval between
++ two checks. To disable this feature, enter 0.
++
++Template: hddtemp/daemon
++Type: boolean
++Default: false
++_Description: Should the hddtemp daemon be started at boot?
++ The hddtemp program can be run as a daemon, listening on port 7634
++ for incoming connections. It is used by some software such as gkrellm to get
++ the temperature of hard drives.
++ .
++ You have the option of starting the hddtemp daemon automatically on
++ system boot. If in doubt, it is suggested to not start it
++ automatically on boot.
++ .
++ This setting can be modified later by running 'dpkg-reconfigure hddtemp'.
++
++Template: hddtemp/interface
++Type: string
++Default: 127.0.0.1
++_Description: Interface to listen on:
++ The hddtemp program can listen for incoming connections on a specific
++ interface, or on all interfaces.
++ .
++ To listen on a specific interface, enter the IP address of that interface
++ (choosing 127.0.0.1 will accept local connections only). To listen on all interfaces,
++ enter 0.0.0.0.
++
++Template: hddtemp/port
++Type: string
++Default: 7634
++_Description: Port to listen on:
++ By default, hddtemp listens for incoming connections on port 7634. This
++ can be changed for another port number.
+--- hddtemp-0.3-beta15.orig/debian/dirs
++++ hddtemp-0.3-beta15/debian/dirs
+@@ -0,0 +1,3 @@
++etc/init.d
++etc/default
++usr/share/doc/hddtemp
+--- hddtemp-0.3-beta15.orig/debian/copyright
++++ hddtemp-0.3-beta15/debian/copyright
+@@ -0,0 +1,26 @@
++This package was debianized by Aurelien Jarno <aurel32 at debian.org> on
++Wed, 8 May 2002 01:40:30 +0200.
++
++It was downloaded from http://www.guzu.net/linux/hddtemp.php
++
++Upstream Author: Emmanuel Varagnat <hddtemp at guzu.net>
++
++Copyright: 2002, 2003 Emmanuel Varagnat
++
++ This program is free software; you can redistribute it and/or modify
++ it under the terms of the GNU General Public License as published by
++ the Free Software Foundation; either version 2 of the License, or
++ (at your option) any later version.
++
++ This program is distributed in the hope that it will be useful,
++ but WITHOUT ANY WARRANTY; without even the implied warranty of
++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ GNU General Public License for more details.
++
++ You should have received a copy of the GNU General Public License with
++ the Debian GNU/Linux distribution in file /usr/share/common-licenses/GPL;
++ if not, write to the Free Software Foundation, Inc., 51 Franklin St,
++ Fifth Floor, Boston, MA 02110-1301 USA
++
++ On Debian systems, the complete text of the GNU General Public
++ License, version 2, can be found in /usr/share/common-licenses/GPL-2.
+--- hddtemp-0.3-beta15.orig/debian/logcheck.ignore.server
++++ hddtemp-0.3-beta15/debian/logcheck.ignore.server
+@@ -0,0 +1,2 @@
++^\w{3} [ :0-9]{11} [._[:alnum:]-]+ hddtemp\[[0-9]+\]: /dev/([hs]d[a-z]|sg[0-9]): .*: [0-9]+ [CF]$
++^\w{3} [ :0-9]{11} [._[:alnum:]-]+ hddtemp\[[0-9]+\]: /dev/([hs]d[a-z]|sg[0-9]): .*: drive is sleeping$
+--- hddtemp-0.3-beta15.orig/debian/config
++++ hddtemp-0.3-beta15/debian/config
+@@ -0,0 +1,51 @@
++#!/bin/sh
++# hddtemp package configuration script
++
++set -e
++
++conffile="/etc/default/hddtemp"
++
++get_config_file()
++{
++ config_field=$1
++ db_field=$2
++
++ if [ -f "$conffile" ] ; then
++ VALUE="$(grep "^[ ]*$config_field" $conffile | sed -e "s/^$config_field *= *\"\(.*\)\"/\1/g")"
++ if [ -n "$VALUE" ] ; then
++ db_set $db_field "$VALUE"
++ fi
++ fi
++}
++
++# Source debconf library -- we have a Depends line
++# to make sure it is there...
++. /usr/share/debconf/confmodule
++db_version 2.0
++
++if [ "$1" = configure -o "$1" = reconfigure ] ; then
++ db_input medium hddtemp/SUID_bit || true
++
++ get_config_file SYSLOG hddtemp/syslog
++ db_input medium hddtemp/syslog || true
++
++ get_config_file DAEMON hddtemp/daemon
++ get_config_file RUN_DAEMON hddtemp/daemon
++ db_input medium hddtemp/daemon || true
++
++ db_go
++
++ db_get hddtemp/daemon
++
++ if [ "$RET" = "true" ] ; then
++ get_config_file INTERFACE hddtemp/interface
++ db_input medium hddtemp/interface || true
++
++ get_config_file PORT hddtemp/port
++ db_input medium hddtemp/port || true
++
++ db_go
++ fi
++fi
++
++exit 0
+--- hddtemp-0.3-beta15.orig/debian/postinst
++++ hddtemp-0.3-beta15/debian/postinst
+@@ -0,0 +1,146 @@
++#!/bin/sh
++# postinst script for hddtemp
++set -e
++
++conffile="/etc/default/hddtemp"
++
++update_config_file()
++{
++ db_field=$1
++ config_field=$2
++
++ RET=false
++ db_get $db_field
++ if [ -n "$RET" ] ; then
++ if grep -q "^$config_field" $conffile ; then
++ # keep any admin changes, while replacing the variable content
++ sed "s/^[ ]*$config_field=\".*\"/$config_field=\"$RET\"/" < $conffile > $conffile.new &&
++ mv $conffile.new $conffile
++ else
++ echo "$config_field=\"$RET\"" >> $conffile
++ fi
++ fi
++}
++
++# Source debconf library -- we have a Depends line
++# to make sure it is there...
++. /usr/share/debconf/confmodule
++db_version 2.0
++
++case "$1" in
++ configure)
++ if [ -f $conffile ] ; then
++ sed -i -e 's/^[ ]*DAEMON/RUN_DAEMON/g' \
++ -e 's/^[ ]*SYSLOG/RUN_SYSLOG/g' \
++ -e 's/^# Master system-wide hddtemp switch.*/# hddtemp network daemon switch. If set to true, hddtemp will listen/' \
++ -e 's/^# set to true. STOP THE SERVICE.*/# for incoming connections./' \
++ -e 's/^# Logging period.*temperatures.$/# Logging period (in seconds) for the temperatures. If set to a value\n# different than 0, hddtemp will run as a daemon periodically logging\n# the temperatures through syslog/' \
++ $conffile
++ if ! grep -q RUN_SYSLOG $conffile ; then
++ cat << EOF >> $conffile
++
++# Logging period (in seconds) for the temperatures. If set to a value
++# different than 0, hddtemp will run as a daemon periodically logging
++# the temperatures through syslog
++RUN_SYSLOG="0"
++EOF
++ fi
++ if ! grep -q OPTIONS $conffile ; then
++ cat << EOF >> $conffile
++
++# Other options to pass to hddtemp
++OPTIONS=""
++EOF
++ fi
++ if ! grep -q DISKS_NOPROBE $conffile ; then
++ cat << EOF >> $conffile
++
++# List of devices you want to use with hddtemp, but that would not be
++# probed for a working sensor.
++DISKS_NOPROBE=""
++EOF
++ fi
++ else
++ cat << EOF > $conffile
++# Defaults for hddtemp initscript (/etc/init.d/hddtemp)
++# This is a POSIX shell fragment
++
++# [automatically edited by postinst, do not change line format ]
++
++# hddtemp network daemon switch. If set to true, hddtemp will listen
++# for incoming connections.
++RUN_DAEMON="true"
++
++# List of devices you want to use with hddtemp. If none specified,
++# hddtemp will probe standard devices.
++#DISKS="/dev/hda"
++
++# List of devices you want to use with hddtemp, but that would not be
++# probed for a working sensor.
++DISKS_NOPROBE=""
++
++# IP address of the interface on which you want hddtemp to be bound
++# on. If none specified, goes to 127.0.0.1. Use 0.0.0.0 to bind hddtemp
++# on all interfaces.
++INTERFACE="127.0.0.1"
++
++# Port number on which you want hddtemp to listen on. If none specified,
++# the port 7634 is used.
++PORT="7634"
++
++# Database file to use. If none specified, /etc/hddtemp.db is used.
++#DATABASE="/etc/hddtemp.db"
++
++# Separator to use between fields. The default separator is '|'.
++#SEPARATOR="|"
++
++# Logging period (in seconds) for the temperatures. If set to a value
++# different than 0, hddtemp will run as a daemon periodically logging
++# the temperatures through syslog
++RUN_SYSLOG="0"
++
++# Other options to pass to hddtemp
++OPTIONS=""
++EOF
++ fi
++
++ update_config_file hddtemp/daemon RUN_DAEMON
++ update_config_file hddtemp/syslog RUN_SYSLOG
++ update_config_file hddtemp/interface INTERFACE
++ update_config_file hddtemp/port PORT
++
++ if ! dpkg-statoverride --list /usr/sbin/hddtemp 1>/dev/null 2>&1; then
++ # check if we are installing suid or not
++ RET=false
++ db_get hddtemp/SUID_bit
++ if [ "$RET" = "true" ]; then
++ chmod 4755 /usr/sbin/hddtemp
++ ln -sf /usr/sbin/hddtemp /usr/bin/hddtemp
++ ln -sf ../man8/hddtemp.8.gz /usr/share/man/man1/hddtemp.1.gz
++ else
++ chmod 0755 /usr/sbin/hddtemp
++ rm -f /usr/bin/hddtemp
++ rm -f /usr/share/man/man8/hddtemp.1.gz
++ fi
++ fi
++
++ db_stop
++
++ rm -f /etc/logcheck/ignore.d.workstation/hddtemp
++ ;;
++ abort-upgrade|abort-remove|abort-deconfigure)
++ ;;
++
++ *)
++ echo "postinst called with unknown argument \`$1'" >&2
++ exit 1
++ ;;
++esac
++
++
++# dh_installdeb will replace this with shell code automatically
++# generated by other debhelper scripts.
++
++#DEBHELPER#
++
++exit 0
+--- hddtemp-0.3-beta15.orig/debian/control
++++ hddtemp-0.3-beta15/debian/control
+@@ -0,0 +1,17 @@
++Source: hddtemp
++Section: utils
++Priority: extra
++Maintainer: Aurelien Jarno <aurel32 at debian.org>
++Build-Depends: debhelper (>> 5), autotools-dev, gettext (>> 0.10.1)
++Standards-Version: 3.9.3
++Homepage: http://www.guzu.net/linux/hddtemp.php
++
++Package: hddtemp
++Architecture: any
++Depends: ${shlibs:Depends}, ${misc:Depends}, lsb-base (>= 3.0-3)
++Suggests: ksensors
++Conflicts: ksensors (<< 0.7-8), gkrellm-hddtemp (<< 0.1-9)
++Description: hard drive temperature monitoring utility
++ The hddtemp program monitors and reports the temperature of PATA, SATA
++ or SCSI hard drives by reading Self-Monitoring Analysis and Reporting
++ Technology (S.M.A.R.T.) information on drives that support this feature.
+--- hddtemp-0.3-beta15.orig/debian/init
++++ hddtemp-0.3-beta15/debian/init
+@@ -0,0 +1,100 @@
++#!/bin/sh
++#
++# skeleton example file to build /etc/init.d/ scripts.
++# This file should be used to construct scripts for /etc/init.d.
++#
++# Written by Miquel van Smoorenburg <miquels at cistron.nl>.
++# Modified for Debian GNU/Linux
++# by Ian Murdock <imurdock at gnu.ai.mit.edu>.
++#
++# Version: @(#)skeleton 1.8 03-Mar-1998 miquels at cistron.nl
++#
++
++### BEGIN INIT INFO
++# Provides: hddtemp
++# Required-Start: $remote_fs $syslog $network
++# Required-Stop: $remote_fs $syslog $network
++# Default-Start: 2 3 4 5
++# Default-Stop: 0 1 6
++# Short-Description: disk temperature monitoring daemon
++# Description: hddtemp is a disk temperature monitoring daemon
++### END INIT INFO
++
++PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
++NAME=hddtemp
++DAEMON=/usr/sbin/$NAME
++DESC="disk temperature monitoring daemon"
++
++DISKS="/dev/hd[a-z] /dev/hd[a-z][a-z]"
++DISKS="$DISKS /dev/sd[a-z] /dev/sd[a-z][a-z]"
++DISKS="$DISKS /dev/sr[a-z] /dev/sr[a-z][a-z]"
++INTERFACE="0.0.0.0"
++PORT="7634"
++SEPARATOR="|"
++RUN_SYSLOG="0"
++
++# Reads config file (will override defaults above)
++[ -r /etc/default/hddtemp ] && . /etc/default/hddtemp
++
++if [ -n "$RUN_SYSLOG" ] && [ "$RUN_SYSLOG" != "0" ] ; then
++ SYSLOG_ARG="-S $RUN_SYSLOG"
++fi
++
++if [ "$RUN_DAEMON" = "true" ] || [ "$RUN_DAEMON" = "yes" ] ; then
++ DAEMON_ARG="-d -l $INTERFACE -p $PORT -s $SEPARATOR"
++fi
++
++[ -x "$DAEMON" ] || exit 0
++
++. /lib/lsb/init-functions
++
++case "$1" in
++ start)
++ # master switch
++ if [ -n "$DAEMON_ARG" ] || [ -n "$SYSLOG_ARG" ] ; then
++ log_daemon_msg "Starting $DESC" "$NAME:"
++ CDROMS_LIST=$(sed -ne 's/^drive name:\t\+\(.*\)$/ \/dev\/\1/p' /proc/sys/dev/cdrom/info 2>/dev/null) || :
++ CDROMS_LIST="$CDROMS_LIST $(grep -sl '^ide-scsi ' /proc/ide/hd*/driver | awk -F / '{ print "/dev/"$4 }')"
++ for disk in $DISKS ; do
++ echo $CDROMS_LIST | grep -wq $disk && continue
++ echo $DISKS_NOPROBE | grep -wq $disk && continue
++ if $DAEMON -wn $OPTIONS $disk 2>/dev/null | grep -q '^[0-9]\+$' ; then
++ DISKS_LIST="$DISKS_LIST $disk";
++ fi
++ done
++ if [ -n "$DISKS_LIST" ] || [ -n "$DISKS_NOPROBE" ] ; then
++ start-stop-daemon --start --quiet --exec $DAEMON -- $DAEMON_ARG $SYSLOG_ARG $OPTIONS $DISKS_NOPROBE $DISKS_LIST
++ ret=$?
++ log_progress_msg "$DISKS_NOPROBE$DISKS_LIST"
++ log_end_msg $ret
++ else
++ log_progress_msg "no disks with monitoring capability were found."
++ log_end_msg 0
++ fi
++ fi
++ ;;
++ stop)
++ # master switch
++ if [ "$RUN_DAEMON" = "true" ] || [ "$RUN_DAEMON" = "yes" ] || [ "$RUN_SYSLOG" != "0" ] ; then
++ log_daemon_msg "Stopping $DESC" "$NAME"
++ start-stop-daemon --stop --oknodo --exec $DAEMON --retry 30
++ log_end_msg $?
++ fi
++ ;;
++ force-reload|reload)
++ exit 3
++ ;;
++ restart)
++ $0 stop && $0 start
++ ;;
++ status)
++ status_of_proc $DAEMON $NAME
++ exit $?
++ ;;
++ *)
++ echo "Usage: /etc/init.d/$NAME {start|stop|restart|status}" >&2
++ exit 1
++ ;;
++esac
++
++exit 0
+--- hddtemp-0.3-beta15.orig/debian/compat
++++ hddtemp-0.3-beta15/debian/compat
+@@ -0,0 +1 @@
++5
+--- hddtemp-0.3-beta15.orig/debian/README.Debian
++++ hddtemp-0.3-beta15/debian/README.Debian
+@@ -0,0 +1,14 @@
++README.Debian for hddtemp
++-------------------------
++
++This package include an init script (/etc/init.d/hddtemp) to run hddtemp
++in daemon mode. To enable and configure it, either use
++'dpkg-reconfigure hddtemp' or edit /etc/default/hddtemp.
++
++By default and when enable, the init script tries to find all disk that
++support SMART. If you get an error such as 'no disks with monitoring
++capability were found' or if an hard disk is not monitored, try to run
++'hddtemp /dev/xxx', with /dev/xxx being you hard disk device. You will
++see an explanation about why it fails.
++
++ -- Aurelien Jarno <aurel32 at debian.org> Sun, 27 Jul 2008 09:34:39 +0200
+--- hddtemp-0.3-beta15.orig/debian/hddtemp.db
++++ hddtemp-0.3-beta15/debian/hddtemp.db
+@@ -0,0 +1,169 @@
++#
++# Insert a regular expression for support of the model or the serie of your hard drive.
++# If you don't know what to put in the second field, put the number
++# that appears most often for your brand :o)
++# A value of zero meens that we know that the drive doesn't have
++# a temperature sensor (you can set the unit to C or F).
++#
++############################################################################
++# The following list was found at (http://www.almico.com/forumharddisks.php)
++# If your drive is in the list send me a mail.
++#
++# Manufacturer Model Size Notes
++# FUJITSU FUJITSU MPF3102AH 10.0GB
++# FUJITSU FUJITSU MPG3204AH E 20.0GB
++# FUJITSU FUJITSU MPG3307AT 30.0GB
++# FUJITSU FUJITSU MPG3409AH 40.0GB
++# FUJITSU FUJITSU MPG3409AH EF 40.0GB
++# HITACHI HITACHI_DK23CA-10 9.8GB
++# HITACHI HITACHI_DK23CA-15 14.7GB
++# SAMSUNG SAMSUNG SV3012H 29.4GB
++# SEAGATE ST310210A 10.0GB
++# SEAGATE ST310211A 9.8GB
++# SEAGATE ST310215A 10.0GB
++# SEAGATE ST315320A 14.9GB
++# SEAGATE ST320410A 19.6GB
++# SEAGATE ST320413A 19.6GB
++# SEAGATE ST320420A 19.9GB
++# SEAGATE ST330610A 29.3GB
++# SEAGATE ST330620A 29.3GB
++# SEAGATE ST330621A 29.3GB
++# SEAGATE ST330630A 29.9GB
++# SEAGATE ST340016A 39.1GB
++# SEAGATE ST340810ACE 39.1GB
++# SEAGATE ST380020ACE 78.2GB
++# WESTERN DIGITAL WDC AC210200D 10.0GB
++# WESTERN DIGITAL WDC AC29100D 8.9GB
++# WESTERN DIGITAL WDC AC420400D 19.9GB
++# WESTERN DIGITAL WDC WD102AA 10.0GB
++#
++#################################################
++
++########################################
++############# ExcelStor drives
++########################################
++# "ExcelStor Technology CT215" ??? ? "ExcelStor CT215"
++
++
++########################################
++############# Fujitsu drives
++########################################
++"FUJITSU MHM2100AT" 0 C "Fujitsu MHM2100AT"
++
++
++########################################
++############# Hitachi drives
++########################################
++"HITACHI_DK228A-65" 0 C "Hitachi DK228A-65"
++
++
++########################################
++############# IBM drives
++########################################
++
++# DJSA serie is using F0h command to report temperature and also have
++# SMART capabilties but it was reported not to work.
++# "DJSA-2(30|32|10|20|05)" 0 C "IBM Travelstar 20GN, 32GH, 30GT series"
++
++"IBM-DARA-212000" 0 C "IBM Travelstar 12GN"
++"IBM-DTTA-35*" 0 C "IBM Deskstar 16GP serie"
++
++# according to specifications they do not seems to have sensor
++# but I prefer waiting for a report
++#"IBM-DTTA-37*" 0 C "IBM Deskstar 14GXP serie"
++
++"IBM-DJNA-35.*" 231 C "IBM Deskstar 25 GP serie"
++"IBM-DJNA-37.*" 231 C "IBM Deskstar 22 GXP serie"
++"IBM-DHEA-(34330|36480)" 0 C "IBM Deskstar 5 serie"
++"IBM-DHEA-(34331|36481|38451)" 0 C "IBM Deskstar 8 serie"
++"IBM-DPTA-37.*" 231 C "IBM Deskstar 34GXP serie"
++"IBM-DPTA-35.*" 231 C "IBM Deskstar 37GP serie"
++
++
++########################################
++############# Maxtor drives
++########################################
++#"Maxtor 2B0[012][04568]H1" ??? C "Maxtor Fireball 541DX"
++# which one must I trust ?
++#"Maxtor 4D040H2" 9 C "Maxtor DiamondMax D540X-4D"
++#"Maxtor 4D040H2" 0 C "Maxtor 4D040H2"
++#"Maxtor 4D080H4" 12 C "Maxtor DiamondMax D540X-4D"
++#"Maxtor 4D060H3" 12 C "Maxtor DiamondMax D540X-4D"
++#"Maxtor 4D080H4" 9 C "Maxtor DiamondMax D540X-4D"
++"Maxtor 5(1024|1369|2049|2732|3073|4098)U(2|3|4|6|8)" 0 C "Maxtor DiamondMax Plus 40"
++"Maxtor 5T0[24]0H[24]" 0 C "Maxtor DiamondMax Plus 60"
++"Maxtor 94098U8" 11 C "Maxtor DiamondMax 40 94098U8"
++
++
++########################################
++############# Quantum drives
++########################################
++"QUANTUM FIREBALLP AS40.0" 0 C "Quantum Fireball AS40"
++"QUANTUM FIREBALL CX10.2A" 0 C "Quantum Fireball CX10.2A"
++#"QUANTUM FIREBALLlct10 20" 4 C "Quantum Fireball CT10 20GB"
++# I suspect the QUANTUM FIREBALL_TM2110A to have a sensor in field 9...
++# "QUANTUM FIREBALL_TM2110A" 9 C "Quantum Fireball TM2110A"
++
++
++########################################
++############# Samsung drives
++########################################
++# somenone reported a problem with the SP8004H which reports a temperature
++# 10°C below the ambient temperature
++"SAMSUNG SW0434A" 0 C "Samsung SW0434A"
++"SAMSUNG SV0432A" 0 C "Samsung SV0432A"
++"SAMSUNG SV3002H" 0 C "Samsung SpinPoint V30 serie"
++#"SAMSUNG SV(0221|0602|0813|1204)H" 9 C "Samsung SpinPoint V60 serie"
++
++
++########################################
++############# Seagate drives
++########################################
++"Seagate Technology 1275MB - ST31276A" 0 C "Seagate ST31276A"
++"ST3412A" 0 C "Seagate ST3412A"
++"ST38641A" 0 C "Seagate ST38641A"
++"ST310210A" 0 C "Seagate ST310210A"
++"ST310220A" 0 C "Seagate ST310220A"
++# SEAGATE ST313021A 13.0GB
++"ST313021A" 0 C "Seagate U8 ST313021A"
++"ST310240A" 0 C "Seagate Medalist 10240 Ultra ATA-3"
++"ST320423A" 0 C "Seagate U10 20423, Ultra ATA/66"
++
++
++########################################
++############# TOSHIBA Laptops
++########################################
++"MK4313MAT" 220 C "Toshiba MK4313MAT"
++"TOSHIBA MK1517GAP" 0 C "Toshiba MK1517GAP"
++"TOSHIBA MK2018GAS" 226 F "Toshiba MK2018GAS"
++
++"TOSHIBA MK3017GAP" 0 C "Toshiba MK3017GAP"
++
++#"TOSHIBA MK4019GAX" 222 C "Toshiba MK4019GAX"
++
++
++########################################
++############# Western Digital drives
++########################################
++# WDC AC310100B and WDC AC2850F are reported not working
++# no more informations were given
++"WDC AC22000L" 0 C "Western Digital Caviar AC22000"
++"WDC AC420400D" 231 C "Western Digital Caviar AC420400D"
++"WDC AC418000D" 231 C "Western Digital AC418000D"
++"WDC WD135BA" 231 C "Western Digital WD135BA"
++
++"WDC WD100EB-00BHF0" 0 C "Western Digital 100EB-00BHF0"
++"WDC WD200BB-00AUA1" 0 C "Western Digital Caviar WD200BB"
++#"WDC WD200BB-60DGA0" 0 C "Western Digital Caviar WD200BB"
++"WDC WD300BB-00CAA0" 0 C "Western Digital WD300BB"
++"WDC WD400BB-00CAA0" 0 C "Western Digital 400BB-00CAA0"
++#"WDC WD400BB-00GFA0" 0 C ""
++"WDC WD400BB-(18CA|00DE)A0" 0 C "Western Digital Caviar WD400BB"
++"WDC WD400EB-00CPF0" 0 C "Western Digital 400EB-00CPF0"
++"WDC WD600BB-32BSA0" 0 C "Western Digital 600BB-32BSA0"
++"WDC WD800BB-00CAA1" 0 C "Western Digital WD800BB-00CAA1"
++"WDC WD800JB-00CRA1" 0 C "Western Digital Caviar WD800JB"
++
++# not sure for next
++# "WDC WD1200JB-00CRA1" 9 C "Western Digital 1200JB-00CRA1"
++# "WDC WD273BA" 9 C "Western Digital WD273BA"
+--- hddtemp-0.3-beta15.orig/debian/po/cs.po
++++ hddtemp-0.3-beta15/debian/po/cs.po
+@@ -0,0 +1,159 @@
++#
++# Translators, if you are not familiar with the PO format, gettext
++# documentation is worth reading, especially sections dedicated to
++# this format, e.g. by running:
++# info -n '(gettext)PO Files'
++# info -n '(gettext)Header Entry'
++#
++# Some information specific to po-debconf are available at
++# /usr/share/doc/po-debconf/README-trans
++# or http://www.debian.org/intl/l10n/po-debconf/README-trans
++#
++# Developers do not need to manually edit POT or PO files.
++#
++msgid ""
++msgstr ""
++"Project-Id-Version: hddtemp\n"
++"Report-Msgid-Bugs-To: hddtemp at packages.debian.org\n"
++"POT-Creation-Date: 2008-01-25 22:35+0100\n"
++"PO-Revision-Date: 2008-02-05 21:54+0100\n"
++"Last-Translator: Miroslav Kure <kurem at debian.cz>\n"
++"Language-Team: Czech <debian-l10n-czech at lists.debian.org>\n"
++"MIME-Version: 1.0\n"
++"Content-Type: text/plain; charset=UTF-8\n"
++"Content-Transfer-Encoding: 8bit\n"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid "Should /usr/sbin/hddtemp be installed SUID root?"
++msgstr "Má se /usr/sbin/hddtemp nainstalovat jako SUID root?"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"You have the option of installing hddtemp with the SUID bit set, allowing it "
++"to be run (reporting hard drive temperatures) by regular users and not only "
++"the superuser."
++msgstr ""
++"Máte možnost nainstalovat hddtemp s nastaveným SUID bitem, což znamená, že "
++"jej kromě správce budou moci spouštět i běžnà uživatelé (a zjišťovat teplotu "
++"pevného disku)."
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"This could potentially allow hddtemp to be used during an attack against the "
++"computer's security. If in doubt, do not choose this option."
++msgstr ""
++"Takto nastavený hddtemp může být potenciálně využit ke kompromitovánà "
++"poÄÃtaÄe. Pokud si nejste jisti, pak je lepÅ¡Ã tuto možnost zamÃtnout."
++
++#. Type: boolean
++#. Description
++#. Type: boolean
++#. Description
++#: ../templates:2001 ../templates:4001
++msgid ""
++"This setting can be modified later by running 'dpkg-reconfigure hddtemp'."
++msgstr "ZmÄ›nÃte-li pozdÄ›ji názor, staÄà spustit „dpkg-reconfigure hddtemp“."
++
++#. Type: string
++#. Description
++#: ../templates:3001
++msgid "Interval between hard drive temperature checks:"
++msgstr "Interval mezi kontrolami teploty pevného disku:"
++
++#. Type: string
++#. Description
++#: ../templates:3001
++msgid ""
++"The temperature of the hard drive(s) can be logged by hddtemp via the "
++"generic system logging interface."
++msgstr ""
++"hddtemp může zaznamenávat teplotu pevného disku (pevných disků) přes obecné "
++"logovacà rozhranà systému."
++
++#. Type: string
++#. Description
++#: ../templates:3001
++msgid ""
++"Please enter a value in seconds corresponding to the interval between two "
++"checks. To disable this feature, enter 0."
++msgstr ""
++"Zadejte poÄet sekund odpovÃdajÃcà dobÄ› mezi po sobÄ› jdoucÃmi měřenÃmi. Pro "
++"zakázánà této vlastnosti jednoduše zadejte 0."
++
++#. Type: boolean
++#. Description
++#: ../templates:4001
++msgid "Should the hddtemp daemon be started at boot?"
++msgstr "Má se daemon hddtemp spouÅ¡tÄ›t pÅ™i startu poÄÃtaÄe?"
++
++#. Type: boolean
++#. Description
++#: ../templates:4001
++msgid ""
++"The hddtemp program can be run as a daemon, listening on port 7634 for "
++"incoming connections. It is used by some software such as gkrellm to get the "
++"temperature of hard drives."
++msgstr ""
++"Program hddtemp může běžet jako daemon a Äekat na portu 7634 na pÅ™Ãchozà "
++"spojenÃ. Takto může být využÃván programy typu gkrellm pro zjiÅ¡tÄ›nà aktuálnà "
++"teploty pevných disků."
++
++#. Type: boolean
++#. Description
++#: ../templates:4001
++msgid ""
++"You have the option of starting the hddtemp daemon automatically on system "
++"boot. If in doubt, it is suggested to not start it automatically on boot."
++msgstr ""
++"Máte možnost spouštět daemona hddtemp automaticky při startu systému. Pokud "
++"si nejste jisti, pak jej raději při startu systému nespouštějte."
++
++#. Type: string
++#. Description
++#: ../templates:5001
++msgid "Interface to listen on:"
++msgstr "RozhranÃ, na kterém naslouchat:"
++
++#. Type: string
++#. Description
++#: ../templates:5001
++msgid ""
++"The hddtemp program can listen for incoming connections on a specific "
++"interface, or on all interfaces."
++msgstr ""
++"Program hddtemp může oÄekávat pÅ™Ãchozà spojenà na konkrétnÃm rozhranà nebo "
++"na vÅ¡ech rozhranÃch."
++
++#. Type: string
++#. Description
++#: ../templates:5001
++msgid ""
++"To listen on a specific interface, enter the IP address of that interface "
++"(choosing 127.0.0.1 will accept local connections only). To listen on all "
++"interfaces, enter 0.0.0.0."
++msgstr ""
++"Aby poslouchal na konkrétnÃm rozhranÃ, zadejte IP adresu daného rozhranà "
++"(127.0.0.1 znamená, že bude pÅ™ijÃmat pouze lokálnà spojenÃ). Pokud chcete, "
++"aby poslouchal na vÅ¡ech rozhranÃch, zadejte 0.0.0.0."
++
++#. Type: string
++#. Description
++#: ../templates:6001
++msgid "Port to listen on:"
++msgstr "Port, na kterém naslouchat:"
++
++#. Type: string
++#. Description
++#: ../templates:6001
++msgid ""
++"By default, hddtemp listens for incoming connections on port 7634. This can "
++"be changed for another port number."
++msgstr ""
++"hddtemp standardnÄ› oÄekává pÅ™Ãchozà spojenà na portu 7634. Pokud vám tento "
++"port nevyhovuje, můžete zadat jiný."
+--- hddtemp-0.3-beta15.orig/debian/po/fr.po
++++ hddtemp-0.3-beta15/debian/po/fr.po
+@@ -0,0 +1,159 @@
++# Translation of hddtemp debconf templates to French
++# Copyright (C) 2008 Christian Perrier <bubulle at debian.org>
++# This file is distributed under the same license as the hddtemp package.
++#
++# Michel Grentzinger <mic.grentz at online.fr>, 2003.
++# Jean-Luc Coulon (f5ibh) <jean-luc.coulon at wanadoo.fr>
++# Christian Perrier <bubulle at debian.org>, 2008.
++msgid ""
++msgstr ""
++"Project-Id-Version: \n"
++"Report-Msgid-Bugs-To: hddtemp at packages.debian.org\n"
++"POT-Creation-Date: 2008-01-25 22:35+0100\n"
++"PO-Revision-Date: 2008-02-10 12:20+0100\n"
++"Last-Translator: Christian Perrier <bubulle at debian.org>\n"
++"Language-Team: French <debian-l10n-french at lists.debian.org>\n"
++"MIME-Version: 1.0\n"
++"Content-Type: text/plain; charset=UTF-8\n"
++"Content-Transfer-Encoding: 8bit\n"
++"X-Generator: KBabel 1.11.4\n"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid "Should /usr/sbin/hddtemp be installed SUID root?"
++msgstr "Faut-il exécuter hddtemp avec les privilèges du superutilisateur ?"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"You have the option of installing hddtemp with the SUID bit set, allowing it "
++"to be run (reporting hard drive temperatures) by regular users and not only "
++"the superuser."
++msgstr ""
++"Il est possible d'installer hddtemp avec le bit « setuid » positionné, ce qui "
++"lui permet d'être exécuté (et donc d'indiquer la température des disques "
++"durs) par les utilisateurs non privilégiés et pas seulement le "
++"superutilisateur."
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"This could potentially allow hddtemp to be used during an attack against the "
++"computer's security. If in doubt, do not choose this option."
++msgstr ""
++"Cela peut théoriquement permettre d'utiliser hddtemp pour une attaque visant "
++"à compromettre la sécurité du système. Dans le doute, il est conseillé ne de "
++"pas activer cette option."
++
++#. Type: boolean
++#. Description
++#. Type: boolean
++#. Description
++#: ../templates:2001 ../templates:4001
++msgid ""
++"This setting can be modified later by running 'dpkg-reconfigure hddtemp'."
++msgstr ""
++"Ce choix peut être modifié ultérieurement avec la commande « dpkg-reconfigure "
++"hddtemp »."
++
++#. Type: string
++#. Description
++#: ../templates:3001
++msgid "Interval between hard drive temperature checks:"
++msgstr "Intervalle entre deux contrôles de température :"
++
++#. Type: string
++#. Description
++#: ../templates:3001
++msgid ""
++"The temperature of the hard drive(s) can be logged by hddtemp via the "
++"generic system logging interface."
++msgstr ""
++"La température des disques durs peut être enregistrée par hddtemp et "
++"restituée par l'interface standard de journalisation du système."
++
++#. Type: string
++#. Description
++#: ../templates:3001
++msgid ""
++"Please enter a value in seconds corresponding to the interval between two "
++"checks. To disable this feature, enter 0."
++msgstr ""
++"Veuillez choisir l'intervalle en secondes entre deux mesures. Indiquez 0 "
++"pour désactiver cette fonctionnalité."
++
++#. Type: boolean
++#. Description
++#: ../templates:4001
++msgid "Should the hddtemp daemon be started at boot?"
++msgstr "Faut-il lancer automatiquement le démon hddtemp au démarrage ?"
++
++#. Type: boolean
++#. Description
++#: ../templates:4001
++msgid ""
++"The hddtemp program can be run as a daemon, listening on port 7634 for "
++"incoming connections. It is used by some software such as gkrellm to get the "
++"temperature of hard drives."
++msgstr ""
++"Le programme hddtemp peut être lancé en tant que démon, à l'écoute sur le "
++"port 7634. Ce démon est utilisé par certains logiciels tel que gkrellm pour "
++"obtenir la température des disques durs."
++
++#. Type: boolean
++#. Description
++#: ../templates:4001
++msgid ""
++"You have the option of starting the hddtemp daemon automatically on system "
++"boot. If in doubt, it is suggested to not start it automatically on boot."
++msgstr ""
++"Ce démon peut être lancé automatiquement au démarrage de l'ordinateur. Dans "
++"le doute, il est suggéré de ne pas activer cette option."
++
++#. Type: string
++#. Description
++#: ../templates:5001
++msgid "Interface to listen on:"
++msgstr "Interface où hddtemp sera à l'écoute :"
++
++#. Type: string
++#. Description
++#: ../templates:5001
++msgid ""
++"The hddtemp program can listen for incoming connections on a specific "
++"interface, or on all interfaces."
++msgstr ""
++"Le programme hddtemp peut être à l'écoute de connexions entrantes sur une "
++"interface spécifique ou sur toutes les interfaces."
++
++#. Type: string
++#. Description
++#: ../templates:5001
++msgid ""
++"To listen on a specific interface, enter the IP address of that interface "
++"(choosing 127.0.0.1 will accept local connections only). To listen on all "
++"interfaces, enter 0.0.0.0."
++msgstr ""
++"Pour écouter sur une interface spécifique, indiquez l'adresse IP de cette "
++"interface (en choisissant 127.0.0.1, seules les connexions locales seront "
++"acceptées). Pour écouter sur toutes les interfaces, saisissez simplement "
++"0.0.0.0."
++
++#. Type: string
++#. Description
++#: ../templates:6001
++msgid "Port to listen on:"
++msgstr "Port sur lequel hddtemp sera à l'écoute :"
++
++#. Type: string
++#. Description
++#: ../templates:6001
++msgid ""
++"By default, hddtemp listens for incoming connections on port 7634. This can "
++"be changed for another port number."
++msgstr ""
++"Par défaut, hddtemp attend les connexions entrantes sur le port 7634. Ce "
++"port peut être modifié si nécessaire."
+--- hddtemp-0.3-beta15.orig/debian/po/vi.po
++++ hddtemp-0.3-beta15/debian/po/vi.po
+@@ -0,0 +1,154 @@
++# Vietnamese Translation for hddtemp.
++# Copyright © 2008 Free Software Foundation, Inc.
++# Clytie Siddall <clytie at riverland.net.au>, 2005-2008.
++#
++msgid ""
++msgstr ""
++"Project-Id-Version: hddtemp_0.3-beta15-36\n"
++"Report-Msgid-Bugs-To: hddtemp at packages.debian.org\n"
++"POT-Creation-Date: 2008-01-25 22:35+0100\n"
++"PO-Revision-Date: 2008-02-13 21:06+1030\n"
++"Last-Translator: Clytie Siddall <clytie at riverland.net.au>\n"
++"Language-Team: Vietnamese <vi-VN at googlegroups.com>\n"
++"MIME-Version: 1.0\n"
++"Content-Type: text/plain; charset=utf-8\n"
++"Content-Transfer-Encoding: 8bit\n"
++"Plural-Forms: nplurals=1; plural=0;\n"
++"X-Generator: LocFactoryEditor 1.7b3\n"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid "Should /usr/sbin/hddtemp be installed SUID root?"
++msgstr "Có nên cà i đặt SUID root « /usr/sbin/hddtemp » không?"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"You have the option of installing hddtemp with the SUID bit set, allowing it "
++"to be run (reporting hard drive temperatures) by regular users and not only "
++"the superuser."
++msgstr ""
++"Bạn có tùy chá»n cà i đặt phần má»m hddtemp vá»›i bit SUID đã đặt, do đó cho phép "
++"nó được chạy bởi các ngÆ°á»i dùng bình thÆ°á»ng, không phải chỉ siêu ngÆ°á»i dùng."
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"This could potentially allow hddtemp to be used during an attack against the "
++"computer's security. If in doubt, do not choose this option."
++msgstr ""
++"Tuy nhiên, đặt bit SUID cÅ©ng có thể cho phép ngÆ°á»i hiểm Ä‘á»™c dùng hddtemp khi "
++"tấn công bảo máºt của máy tÃnh nà y. Vì váºy nếu bạn chÆ°a chắc chắn, đừng báºt "
++"tùy chá»n nà y."
++
++#. Type: boolean
++#. Description
++#. Type: boolean
++#. Description
++#: ../templates:2001 ../templates:4001
++msgid ""
++"This setting can be modified later by running 'dpkg-reconfigure hddtemp'."
++msgstr ""
++"CÅ©ng có thể sá»a đổi thiết láºp nà y vá» sau, bằng cách chạy lệnh cấu hình lại « "
++"dpkg-reconfigure hddtemp »."
++
++#. Type: string
++#. Description
++#: ../templates:3001
++msgid "Interval between hard drive temperature checks:"
++msgstr "Khoảng giữa hai lần kiểm tra nhiệt độ của đĩa cứng:"
++
++#. Type: string
++#. Description
++#: ../templates:3001
++msgid ""
++"The temperature of the hard drive(s) can be logged by hddtemp via the "
++"generic system logging interface."
++msgstr ""
++"Nhiệt độ của những đĩa cứng có thể được ghi lưu bởi hddtemp thông qua giao "
++"diện ghi lưu hệ thống chung."
++
++#. Type: string
++#. Description
++#: ../templates:3001
++msgid ""
++"Please enter a value in seconds corresponding to the interval between two "
++"checks. To disable this feature, enter 0."
++msgstr ""
++"Hãy nháºp má»™t giá trị theo giây mà tÆ°Æ¡ng ứng vá»›i khoảng thá»i gian giữa hai "
++"lần kiểm tra. Äể tắt tÃnh năng nà y, chỉ Ä‘Æ¡n giản nháºp số 0 ở đây."
++
++#. Type: boolean
++#. Description
++#: ../templates:4001
++msgid "Should the hddtemp daemon be started at boot?"
++msgstr "Có nên khởi chạy trình ná»n hddtemp khi khởi Ä‘á»™ng hệ thống không?"
++
++#. Type: boolean
++#. Description
++#: ../templates:4001
++msgid ""
++"The hddtemp program can be run as a daemon, listening on port 7634 for "
++"incoming connections. It is used by some software such as gkrellm to get the "
++"temperature of hard drives."
++msgstr ""
++"ChÆ°Æ¡ng trình hddtemp cÅ©ng có thể chạy dÆ°á»›i dạng trình ná»n (daemon), lắng "
++"nghe trên cổng 7634 tìm kết nối gá»i đến. Trình ná»n nà y được dùng bởi má»™t số "
++"phần má»m (v.d. gkrellm) để lấy nhiệt Ä‘á»™ của các Ä‘Ä©a cứng."
++
++#. Type: boolean
++#. Description
++#: ../templates:4001
++msgid ""
++"You have the option of starting the hddtemp daemon automatically on system "
++"boot. If in doubt, it is suggested to not start it automatically on boot."
++msgstr ""
++"Tùy chá»n bạn có thể tá»± Ä‘á»™ng khởi chạy trình ná»n hddtemp khi khởi Ä‘á»™ng hệ "
++"thống. ChÆ°a chắc chắc thì khuyên bạn không báºt tùy chá»n nà y."
++
++#. Type: string
++#. Description
++#: ../templates:5001
++msgid "Interface to listen on:"
++msgstr "Giao diện trên đó cần lắng nghe:"
++
++#. Type: string
++#. Description
++#: ../templates:5001
++msgid ""
++"The hddtemp program can listen for incoming connections on a specific "
++"interface, or on all interfaces."
++msgstr ""
++"ChÆ°Æ¡ng trình hddtemp có thể lắng nghe kết nối gá»i đến trên má»™t giao diện dứt "
++"khoát, hoặc trên má»i giao diện."
++
++#. Type: string
++#. Description
++#: ../templates:5001
++msgid ""
++"To listen on a specific interface, enter the IP address of that interface "
++"(choosing 127.0.0.1 will accept local connections only). To listen on all "
++"interfaces, enter 0.0.0.0."
++msgstr ""
++"Äể lắng nghe trên má»™t giao diện cụ thể, hãy nháºp địa chỉ IP của giao diện đó "
++"(giá trị « 127.0.0.0 » sẽ chỉ chấp nháºn kết nối cục bá»™). Äể lắng nghe trên "
++"má»i giao diện, chỉ Ä‘Æ¡n giản hãy nháºp địa chỉ « 0.0.0.0 »."
++
++#. Type: string
++#. Description
++#: ../templates:6001
++msgid "Port to listen on:"
++msgstr "Cổng trên đó cần lắng nghe:"
++
++#. Type: string
++#. Description
++#: ../templates:6001
++msgid ""
++"By default, hddtemp listens for incoming connections on port 7634. This can "
++"be changed for another port number."
++msgstr ""
++"Mặc định là hddtemp lắng nghe kết nối gá»i đến trên cổng 7634. CÅ©ng có thể "
++"thay đổi nó thà nh một cổng khác."
+--- hddtemp-0.3-beta15.orig/debian/po/pt_BR.po
++++ hddtemp-0.3-beta15/debian/po/pt_BR.po
+@@ -0,0 +1,205 @@
++#
++# Translators, if you are not familiar with the PO format, gettext
++# documentation is worth reading, especially sections dedicated to
++# this format, e.g. by running:
++# info -n '(gettext)PO Files'
++# info -n '(gettext)Header Entry'
++#
++# Some information specific to po-debconf are available at
++# /usr/share/doc/po-debconf/README-trans
++# or http://www.debian.org/intl/l10n/po-debconf/README-trans
++#
++# Developers do not need to manually edit POT or PO files.
++#
++msgid ""
++msgstr ""
++"Project-Id-Version: hddtemp_0.3-beta7-1\n"
++"Report-Msgid-Bugs-To: hddtemp at packages.debian.org\n"
++"POT-Creation-Date: 2008-01-25 22:35+0100\n"
++"PO-Revision-Date: 2007-12-11 15:33+0100\n"
++"Last-Translator: Tiago Bortoletto Vaz <tiago at debian-ba.org>\n"
++"Language-Team: Debian-BR Project <debian-l10n-portuguese at lists.debian.org>\n"
++"MIME-Version: 1.0\n"
++"Content-Type: text/plain; charset=ISO-8859-1\n"
++"Content-Transfer-Encoding: 8bit\n"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++#, fuzzy
++#| msgid "Do you want /usr/sbin/hddtemp to be installed SUID root?"
++msgid "Should /usr/sbin/hddtemp be installed SUID root?"
++msgstr "Deseja que o /usr/sbin/hddtemp seja instalado SUID root ?"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"You have the option of installing hddtemp with the SUID bit set, allowing it "
++"to be run (reporting hard drive temperatures) by regular users and not only "
++"the superuser."
++msgstr ""
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"This could potentially allow hddtemp to be used during an attack against the "
++"computer's security. If in doubt, do not choose this option."
++msgstr ""
++
++#. Type: boolean
++#. Description
++#. Type: boolean
++#. Description
++#: ../templates:2001 ../templates:4001
++msgid ""
++"This setting can be modified later by running 'dpkg-reconfigure hddtemp'."
++msgstr ""
++
++#. Type: string
++#. Description
++#: ../templates:3001
++msgid "Interval between hard drive temperature checks:"
++msgstr ""
++
++#. Type: string
++#. Description
++#: ../templates:3001
++msgid ""
++"The temperature of the hard drive(s) can be logged by hddtemp via the "
++"generic system logging interface."
++msgstr ""
++
++#. Type: string
++#. Description
++#: ../templates:3001
++msgid ""
++"Please enter a value in seconds corresponding to the interval between two "
++"checks. To disable this feature, enter 0."
++msgstr ""
++
++#. Type: boolean
++#. Description
++#: ../templates:4001
++#, fuzzy
++#| msgid "Do you want to start the hddtemp daemon on startup?"
++msgid "Should the hddtemp daemon be started at boot?"
++msgstr "Deseja iniciar o daemon hddtemp na inicialização do sistema ?"
++
++#. Type: boolean
++#. Description
++#: ../templates:4001
++#, fuzzy
++#| msgid ""
++#| "hddtemp can be run as a daemon, listening on port 7634 for incoming "
++#| "connections. It is used some by software such as gkrellm to get the "
++#| "temperature of the hard drives."
++msgid ""
++"The hddtemp program can be run as a daemon, listening on port 7634 for "
++"incoming connections. It is used by some software such as gkrellm to get the "
++"temperature of hard drives."
++msgstr ""
++"O hddtemp pode ser executado com um daemon, ouvindo na porta 7634 por "
++"conexões entrantes. O mesmo é usado por alguns softwares como o gkrellm-"
++"hddtemp para obter a temperatura dos discos rígidos."
++
++#. Type: boolean
++#. Description
++#: ../templates:4001
++#, fuzzy
++msgid ""
++"You have the option of starting the hddtemp daemon automatically on system "
++"boot. If in doubt, it is suggested to not start it automatically on boot."
++msgstr ""
++"Você tem a opção de iniciar o daemon hddtemp automaticamente na "
++"inicialização de seu computador. Caso esteja em dúvida, é sugerido que você "
++"não inicie o hddtemp automaticamente na inicialização de seu computador. "
++"Caso você mude de idéia posteriormente você poderá executar o comando 'dpkg-"
++"reconfigure hddtemp' para mudar essa configuração."
++
++#. Type: string
++#. Description
++#: ../templates:5001
++msgid "Interface to listen on:"
++msgstr ""
++
++#. Type: string
++#. Description
++#: ../templates:5001
++#, fuzzy
++#| msgid ""
++#| "hddtemp can listen for incoming connections on a specific interface, or "
++#| "on all interfaces."
++msgid ""
++"The hddtemp program can listen for incoming connections on a specific "
++"interface, or on all interfaces."
++msgstr ""
++"O hddtemp pode ouvir por conexões entrantes em uma interface específica ou "
++"em todas as interfaces."
++
++#. Type: string
++#. Description
++#: ../templates:5001
++#, fuzzy
++#| msgid ""
++#| "To listen on a specific interface, enter the IP address of that "
++#| "interface (127.0.0.1 which is the default value corresponds to the lo "
++#| "interface). To listen on all interfaces, simply enter 0.0.0.0."
++msgid ""
++"To listen on a specific interface, enter the IP address of that interface "
++"(choosing 127.0.0.1 will accept local connections only). To listen on all "
++"interfaces, enter 0.0.0.0."
++msgstr ""
++"Para ouvir em uma interface específica, informe o endereço IP da interface "
++"em questão (o endereço padrão 127.0.0.1 corresponde a interface lo). Para "
++"ouvir e todas as interfaces, simplesmente informe o endereço 0.0.0.0 ."
++
++#. Type: string
++#. Description
++#: ../templates:6001
++msgid "Port to listen on:"
++msgstr ""
++
++#. Type: string
++#. Description
++#: ../templates:6001
++#, fuzzy
++#| msgid ""
++#| "By default, hddtemp listen for incoming connections on port 7634. However "
++#| "if you don't find this port appropriate, you can enter an other one."
++msgid ""
++"By default, hddtemp listens for incoming connections on port 7634. This can "
++"be changed for another port number."
++msgstr ""
++"Por padrão, o hddtemp escuta por conexões entrantes na porta 7634. Porém "
++"caso você ache que essa não seja a porta apropriada, você pode informar uma "
++"outra porta."
++
++#~ msgid "You have the option of installing hddtemp with the SUID bit set."
++#~ msgstr "Você tem a opção de instalar o hddtemp com o bit de SUID ligado."
++
++#~ msgid ""
++#~ "If you make hddtemp SUID, unprivileged users of your systems will be able "
++#~ "to run it. This could, however, potentially allow hddtemp to be used "
++#~ "during a security attack on your computer. If in doubt, it is suggested "
++#~ "to install it without SUID. If you later change your mind, you can run: "
++#~ "'dpkg-reconfigure hddtemp'."
++#~ msgstr ""
++#~ "Caso você permita que o hdddtemp seja instalado com o bit de SUID ligado, "
++#~ "usuários não privilegiados de seu sistema serão capazes de executá-lo. "
++#~ "Isso pode, porém, potencialmente permitir que o hddtemp seja usado "
++#~ "durante um ataque contra a segurança de seu computador. Caso esteja em "
++#~ "dúvida, é sugerido que vcê instale o hddtemp sem o bit de SUID ligado. "
++#~ "Caso você mude de idéia posteriormente, você poderá executar o comando "
++#~ "'dpkg-reconfigure hddtemp' para mudar essa suaconfiguração."
++
++#, fuzzy
++#~ msgid "At which interval do you want to log the temperatures?"
++#~ msgstr "Em qual interface você deseja que o hddtemp escute ?"
++
++#~ msgid "On which interface do you want hddtemp to listen on?"
++#~ msgstr "Em qual interface você deseja que o hddtemp escute ?"
++
++#~ msgid "On which port do you want hddtemp to listen on?"
++#~ msgstr "Em qual porta você deseja que o hddtemp escute ?"
+--- hddtemp-0.3-beta15.orig/debian/po/ru.po
++++ hddtemp-0.3-beta15/debian/po/ru.po
+@@ -0,0 +1,156 @@
++# translation of ru.po to Russian
++# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
++# This file is distributed under the same license as the PACKAGE package.
++#
++# Yuri Kozlov <kozlov.y at gmail.com>, 2008.
++msgid ""
++msgstr ""
++"Project-Id-Version: 0.3-beta15-39\n"
++"Report-Msgid-Bugs-To: hddtemp at packages.debian.org\n"
++"POT-Creation-Date: 2008-01-25 22:35+0100\n"
++"PO-Revision-Date: 2008-01-27 19:15+0300\n"
++"Last-Translator: Yuri Kozlov <kozlov.y at gmail.com>\n"
++"Language-Team: Russian <debian-l10n-russian at lists.debian.org>\n"
++"MIME-Version: 1.0\n"
++"Content-Type: text/plain; charset=UTF-8\n"
++"Content-Transfer-Encoding: 8bit\n"
++"X-Generator: KBabel 1.11.4\n"
++"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
++"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid "Should /usr/sbin/hddtemp be installed SUID root?"
++msgstr "УÑтановить /usr/sbin/hddtemp как SUID root?"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"You have the option of installing hddtemp with the SUID bit set, allowing it "
++"to be run (reporting hard drive temperatures) by regular users and not only "
++"the superuser."
++msgstr ""
++"Ð’Ñ‹ можете выбрать уÑтановку hddtemp Ñ Ð²ÐºÐ»ÑŽÑ‡Ñ‘Ð½Ð½Ñ‹Ð¼ SUID битом, чтобы её можно "
++"было запуÑкать проÑтым пользователÑм (Ð´Ð»Ñ Ð¿Ð¾Ð»ÑƒÑ‡ÐµÐ½Ð¸Ñ Ñ‚ÐµÐ¼Ð¿ÐµÑ€Ð°Ñ‚ÑƒÑ€ жёÑтких "
++"диÑков), а не только Ñуперпользователю."
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"This could potentially allow hddtemp to be used during an attack against the "
++"computer's security. If in doubt, do not choose this option."
++msgstr ""
++"Потенциально, Ñто может позволить иÑпользовать hddtemp Ð´Ð»Ñ Ð½Ð°Ñ€ÑƒÑˆÐµÐ½Ð¸Ñ "
++"компьютерной безопаÑноÑти. ЕÑли не уверены, ответьте отрицательно."
++
++#. Type: boolean
++#. Description
++#. Type: boolean
++#. Description
++#: ../templates:2001 ../templates:4001
++msgid ""
++"This setting can be modified later by running 'dpkg-reconfigure hddtemp'."
++msgstr ""
++"Ðту наÑтройку можно позже изменить запуÑтив 'dpkg-reconfigure hddtemp'."
++
++#. Type: string
++#. Description
++#: ../templates:3001
++msgid "Interval between hard drive temperature checks:"
++msgstr "Интервал между проверками температуры жёÑткого диÑка:"
++
++#. Type: string
++#. Description
++#: ../templates:3001
++msgid ""
++"The temperature of the hard drive(s) can be logged by hddtemp via the "
++"generic system logging interface."
++msgstr ""
++"Температура жёÑткого диÑка(ов) может быть протоколироватьÑÑ hddtemp Ñ "
++"помощью Ñтандартного ÑиÑтемного интерфейÑа протоколированиÑ."
++
++#. Type: string
++#. Description
++#: ../templates:3001
++msgid ""
++"Please enter a value in seconds corresponding to the interval between two "
++"checks. To disable this feature, enter 0."
++msgstr ""
++"Введите значение интервала в Ñекундах между проверками. Ð”Ð»Ñ Ð²Ñ‹ÐºÐ»ÑŽÑ‡ÐµÐ½Ð¸Ñ "
++"проверок введите 0."
++
++#. Type: boolean
++#. Description
++#: ../templates:4001
++msgid "Should the hddtemp daemon be started at boot?"
++msgstr "ЗапуÑкать ÑÐµÑ€Ð²Ð¸Ñ hddtemp при Ñтарте компьютера?"
++
++#. Type: boolean
++#. Description
++#: ../templates:4001
++msgid ""
++"The hddtemp program can be run as a daemon, listening on port 7634 for "
++"incoming connections. It is used by some software such as gkrellm to get the "
++"temperature of hard drives."
++msgstr ""
++"Программа hddtemp может работать в виде ÑервиÑа, Ð¿Ñ€Ð¸Ð½Ð¸Ð¼Ð°Ñ Ð·Ð°Ð¿Ñ€Ð¾ÑÑ‹ на порту "
++"7634. Ðто иÑпользуетÑÑ Ð½ÐµÐºÐ¾Ñ‚Ð¾Ñ€Ñ‹Ð¼ ПО, например gkrellm, Ð´Ð»Ñ Ð¿Ð¾Ð»ÑƒÑ‡ÐµÐ½Ð¸Ñ "
++"температуры жёÑтких диÑков."
++
++#. Type: boolean
++#. Description
++#: ../templates:4001
++msgid ""
++"You have the option of starting the hddtemp daemon automatically on system "
++"boot. If in doubt, it is suggested to not start it automatically on boot."
++msgstr ""
++"Ð¡ÐµÐ¹Ñ‡Ð°Ñ Ð²Ñ‹ можете включить автоматичеÑкий запуÑк ÑервиÑа hddtemp во Ð²Ñ€ÐµÐ¼Ñ "
++"загрузки ÑиÑтемы. ЕÑли не уверены, выберите не запуÑкать Ñту программу во "
++"Ð²Ñ€ÐµÐ¼Ñ Ð·Ð°Ð³Ñ€ÑƒÐ·ÐºÐ¸."
++
++#. Type: string
++#. Description
++#: ../templates:5001
++msgid "Interface to listen on:"
++msgstr "Ð˜Ð½Ñ‚ÐµÑ€Ñ„ÐµÐ¹Ñ Ð¿Ñ€Ð¸Ñ‘Ð¼Ð° запроÑов:"
++
++#. Type: string
++#. Description
++#: ../templates:5001
++msgid ""
++"The hddtemp program can listen for incoming connections on a specific "
++"interface, or on all interfaces."
++msgstr ""
++"Программа hddtemp может принимать входÑщие запроÑÑ‹ на определённом "
++"интерфейÑе или Ñо вÑех интерфейÑов."
++
++#. Type: string
++#. Description
++#: ../templates:5001
++msgid ""
++"To listen on a specific interface, enter the IP address of that interface "
++"(choosing 127.0.0.1 will accept local connections only). To listen on all "
++"interfaces, enter 0.0.0.0."
++msgstr ""
++"Ð”Ð»Ñ Ð¿Ñ€Ð¸Ñ‘Ð¼Ð° на конкретном интерфейÑа введите IP-Ð°Ð´Ñ€ÐµÑ Ñтого интерфейÑа (ввод "
++"127.0.0.1 обеÑпечит приём только локальных запроÑов). Ð”Ð»Ñ Ð¿Ñ€Ð¸Ñ‘Ð¼Ð° запроÑов Ñо "
++"вÑех интерфейÑов, введите 0.0.0.0."
++
++#. Type: string
++#. Description
++#: ../templates:6001
++msgid "Port to listen on:"
++msgstr "Порт приёма запроÑов:"
++
++#. Type: string
++#. Description
++#: ../templates:6001
++msgid ""
++"By default, hddtemp listens for incoming connections on port 7634. This can "
++"be changed for another port number."
++msgstr ""
++"По умолчанию, hddtemp принимает входÑщие запроÑÑ‹ Ñ Ð¿Ð¾Ñ€Ñ‚Ð° 7634. ЗдеÑÑŒ можно "
++"задать другой номер порта."
+--- hddtemp-0.3-beta15.orig/debian/po/sv.po
++++ hddtemp-0.3-beta15/debian/po/sv.po
+@@ -0,0 +1,127 @@
++# Translators, if you are not familiar with the PO format, gettext
++# documentation is worth reading, especially sections dedicated to
++# this format, e.g. by running:
++# info -n '(gettext)PO Files'
++# info -n '(gettext)Header Entry'
++# Some information specific to po-debconf are available at
++# /usr/share/doc/po-debconf/README-trans
++# or http://www.debian.org/intl/l10n/po-debconf/README-trans
++# Developers do not need to manually edit POT or PO files.
++# , fuzzy
++#
++#
++msgid ""
++msgstr ""
++"Project-Id-Version: hddtemp 0.3-beta14-1\n"
++"Report-Msgid-Bugs-To: hddtemp at packages.debian.org\n"
++"POT-Creation-Date: 2008-01-25 22:35+0100\n"
++"PO-Revision-Date: 2008-07-27 09:49+0200\n"
++"Last-Translator: Martin Bagge <brother at bsnet.se>\n"
++"Language-Team: Swedish <sv at li.org>\n"
++"MIME-Version: 1.0\n"
++"Content-Type: text/plain; charset=iso-8859-1\n"
++"Content-Transfer-Encoding: 8bit\n"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid "Should /usr/sbin/hddtemp be installed SUID root?"
++msgstr "Vill du att /usr/sbin/hddtemp ska installeras som SUID root?"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid "You have the option of installing hddtemp with the SUID bit set, allowing it to be run (reporting hard drive temperatures) by regular users and not only the superuser."
++msgstr "Du kan installera hddtemp med SUID, då kan programmet köras av vanliga användare och inte bara superanvändare."
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid "This could potentially allow hddtemp to be used during an attack against the computer's security. If in doubt, do not choose this option."
++msgstr "Detta kan bidra till att intrång kan genomföras om det skulle finnas fel i hddtemp som någon nyttjar för att skaffa otillåten åtkomst. Om du är minsta osäker ska du inte aktivera detta alternativ."
++
++#. Type: boolean
++#. Description
++#. Type: boolean
++#. Description
++#: ../templates:2001
++#: ../templates:4001
++msgid "This setting can be modified later by running 'dpkg-reconfigure hddtemp'."
++msgstr "Denna inställning kan ändras senare genom att köra 'dpkg-reconfige hddtemp'"
++
++#. Type: string
++#. Description
++#: ../templates:3001
++msgid "Interval between hard drive temperature checks:"
++msgstr "Intervall mellan temperaturmätningar:"
++
++#. Type: string
++#. Description
++#: ../templates:3001
++msgid "The temperature of the hard drive(s) can be logged by hddtemp via the generic system logging interface."
++msgstr "Temperaturen för hårddisken/hårddiskarna kan loggas i det vanliga loggningssystemet."
++
++#. Type: string
++#. Description
++#: ../templates:3001
++msgid "Please enter a value in seconds corresponding to the interval between two checks. To disable this feature, enter 0."
++msgstr "Ange ett värde i sekunder som anger intervallen mellan två mätningar. För att inaktivera den här funktionen, ange 0 som värde."
++
++#. Type: boolean
++#. Description
++#: ../templates:4001
++msgid "Should the hddtemp daemon be started at boot?"
++msgstr "Vill du starta hddtemp-tjänsten när systemet startas upp?"
++
++#. Type: boolean
++#. Description
++#: ../templates:4001
++msgid "The hddtemp program can be run as a daemon, listening on port 7634 for incoming connections. It is used by some software such as gkrellm to get the temperature of hard drives."
++msgstr "hddtemp kan köras som en tjänst som lyssnar på port 7634 efter inkommande anslutningar. Den används av programvara såsom gkrellm för att läsa av temperaturen på hårddiskarna."
++
++#. Type: boolean
++#. Description
++#: ../templates:4001
++msgid "You have the option of starting the hddtemp daemon automatically on system boot. If in doubt, it is suggested to not start it automatically on boot."
++msgstr "Du har alternativet att starta hddtemp-tjänsten automatiskt när datorn startas upp. Om du är osäker föreslår jag att du inte startar den automatiskt vid uppstarten."
++
++#. Type: string
++#. Description
++#: ../templates:5001
++msgid "Interface to listen on:"
++msgstr "Gränssnitt att lyssna på:"
++
++#. Type: string
++#. Description
++#: ../templates:5001
++msgid "The hddtemp program can listen for incoming connections on a specific interface, or on all interfaces."
++msgstr "hddtemp kan lyssna efter inkommande anslutningar på specifika nätverksgränssnitt eller på gränssnitt."
++
++#. Type: string
++#. Description
++#: ../templates:5001
++msgid ""
++"To listen on a specific interface, enter the IP address of that interface "
++"(choosing 127.0.0.1 will accept local connections only). To listen on all "
++"interfaces, enter 0.0.0.0."
++msgstr ""
++"För att lyssna på ett specifik nätverkgränssnitt, ange IP-adressen på det "
++"gränssnittet (127.0.0.1, vilket är standardvärdet för gränssnittet lo). För "
++"att lyssna på alla, ange 0.0.0.0."
++
++#. Type: string
++#. Description
++#: ../templates:6001
++msgid "Port to listen on:"
++msgstr "Port att lyssna på:"
++
++#. Type: string
++#. Description
++#: ../templates:6001
++msgid ""
++"By default, hddtemp listens for incoming connections on port 7634. This can "
++"be changed for another port number."
++msgstr ""
++"Som standard lyssnar hddtemp efter inkommande anslutningar på port 7634. Om "
++"du anser att denna port inte är lämplig kan du ange en annan port här."
++
+--- hddtemp-0.3-beta15.orig/debian/po/da.po
++++ hddtemp-0.3-beta15/debian/po/da.po
+@@ -0,0 +1,158 @@
++# Danish translation hddtemp.
++# Copyright (C) 2010 hddtemp & nedenstående oversættere.
++# This file is distributed under the same license as the hddtemp package.
++# Claus Hindsgaul <claus_h at image.dk>, 2004, 2005.
++# Claus Hindsgaul <claus.hindsgaul at gmail.com>, 2006.
++# Joe Hansen (joedalton2 at yahoo.dk), 2010.
++#
++msgid ""
++msgstr ""
++"Project-Id-Version: hddtemp\n"
++"Report-Msgid-Bugs-To: hddtemp at packages.debian.org\n"
++"POT-Creation-Date: 2008-01-25 22:35+0100\n"
++"PO-Revision-Date: 2010-11-10 12:42+0000\n"
++"Last-Translator: Joe Hansen <joedalton2 at yahoo.dk>\n"
++"Language-Team: Danish <dansk at dansk-gruppen.dk>\n"
++"MIME-Version: 1.0\n"
++"Content-Type: text/plain; charset=UTF-8\n"
++"Content-Transfer-Encoding: 8bit\n"
++"Plural-Forms: nplurals=2; plural=(n != 1);\n"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid "Should /usr/sbin/hddtemp be installed SUID root?"
++msgstr "Skal /usr/sbin/hddtemp installeres SUID root?"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"You have the option of installing hddtemp with the SUID bit set, allowing it "
++"to be run (reporting hard drive temperatures) by regular users and not only "
++"the superuser."
++msgstr ""
++"Du har muligheden for at installere hddtemp med sættet SUID bit, og tillade "
++"den at blive kørt (rapportering af temperaturer for harddiske) af normale "
++"brugere og ikke kun superbrugeren."
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"This could potentially allow hddtemp to be used during an attack against the "
++"computer's security. If in doubt, do not choose this option."
++msgstr ""
++"Dette kan potentielt tillade hddtemp at blive brugt under et angreb mod "
++"computerens sikkerhed. Hvis du er i tvivl, så vælg ikke denne indstilling."
++
++#. Type: boolean
++#. Description
++#. Type: boolean
++#. Description
++#: ../templates:2001 ../templates:4001
++msgid ""
++"This setting can be modified later by running 'dpkg-reconfigure hddtemp'."
++msgstr ""
++"Denne indstilling kan ændres senere ved at køre »dpkg-reconfigure hddtemp«."
++
++#. Type: string
++#. Description
++#: ../templates:3001
++msgid "Interval between hard drive temperature checks:"
++msgstr "Tidsrum mellem to tjek af temperaturen på harddisken:"
++
++#. Type: string
++#. Description
++#: ../templates:3001
++msgid ""
++"The temperature of the hard drive(s) can be logged by hddtemp via the "
++"generic system logging interface."
++msgstr ""
++"Temperaturen på harddiskene kan logges af hddtemp via den generiske "
++"grænseflade til systemlogning."
++
++#. Type: string
++#. Description
++#: ../templates:3001
++msgid ""
++"Please enter a value in seconds corresponding to the interval between two "
++"checks. To disable this feature, enter 0."
++msgstr ""
++"Indtast venligst en værdi i sekunder, der angiver intervallet mellem to tjek. "
++"Du kan deaktivere denne funktion ved at skrive 0."
++
++#. Type: boolean
++#. Description
++#: ../templates:4001
++msgid "Should the hddtemp daemon be started at boot?"
++msgstr "Skal hddtemp-dæmonen igangsættes ved opstart?"
++
++#. Type: boolean
++#. Description
++#: ../templates:4001
++msgid ""
++"The hddtemp program can be run as a daemon, listening on port 7634 for "
++"incoming connections. It is used by some software such as gkrellm to get the "
++"temperature of hard drives."
++msgstr ""
++"Programmet hddtemp kan køres som en dæmon, der lytter på port 7634 efter "
++"indkommende forbindelser. Programmet bruges af bestemte programmer såsom "
++"gkrellm til at hente harddiskenes temperaturer."
++
++#. Type: boolean
++#. Description
++#: ../templates:4001
++msgid ""
++"You have the option of starting the hddtemp daemon automatically on system "
++"boot. If in doubt, it is suggested to not start it automatically on boot."
++msgstr ""
++"Du har mulighed for at igangsætte hddtemp-dæmonen automatisk under opstart. "
++"Hvis du er i tvivl, foreslås det, at du ikke igangsætter den automatisk under "
++"opstarten."
++
++#. Type: string
++#. Description
++#: ../templates:5001
++msgid "Interface to listen on:"
++msgstr "Netkort, der skal lyttes på:"
++
++#. Type: string
++#. Description
++#: ../templates:5001
++msgid ""
++"The hddtemp program can listen for incoming connections on a specific "
++"interface, or on all interfaces."
++msgstr ""
++"Programmet hddtemp kan lytte efter indkommende forbindelser på et bestemt "
++"netkort eller på alle netkort."
++
++#. Type: string
++#. Description
++#: ../templates:5001
++msgid ""
++"To listen on a specific interface, enter the IP address of that interface "
++"(choosing 127.0.0.1 will accept local connections only). To listen on all "
++"interfaces, enter 0.0.0.0."
++msgstr ""
++"For at lytte til et bestemt netkort, skal du angive IP-adressen på dette "
++"(valg af 127.0.0.1 vil kun acceptere lokale forbindelser). For at "
++"lytte på alle netkort indtastes 0.0.0.0."
++
++#. Type: string
++#. Description
++#: ../templates:6001
++msgid "Port to listen on:"
++msgstr "Port, der skal lyttes på:"
++
++#. Type: string
++#. Description
++#: ../templates:6001
++msgid ""
++"By default, hddtemp listens for incoming connections on port 7634. This can "
++"be changed for another port number."
++msgstr ""
++"Som udgangspunkt vil hddtemp lytte efter indkommende forbindelser på port "
++"7634. Dette kan ændres til et andet nummer."
++
++
+--- hddtemp-0.3-beta15.orig/debian/po/pt.po
++++ hddtemp-0.3-beta15/debian/po/pt.po
+@@ -0,0 +1,158 @@
++# translation of pt.po to portugues
++# Portuguese translation for hddtemp
++# Copyright (C) 2006, 2007, 2008 Free Software Foundation, Inc.
++# This file is distributed under the same license as the hddtemp package.
++#
++# Miguel Figueiredo <elmig at debianpt.org>, 2006, 2007.
++# Bruno Queiros <brunomiguelqueiros at sapo.pt>, 2007.
++# Bruno Queiros <bqueiros at gmail.com>, 2008.
++msgid ""
++msgstr ""
++"Project-Id-Version: pt\n"
++"Report-Msgid-Bugs-To: hddtemp at packages.debian.org\n"
++"POT-Creation-Date: 2008-01-25 22:35+0100\n"
++"PO-Revision-Date: 2008-02-10 19:48+0000\n"
++"Last-Translator: Bruno Queiros <bqueiros at gmail.com>\n"
++"Language-Team: portugues <pt at li.org>\n"
++"MIME-Version: 1.0\n"
++"Content-Type: text/plain; charset=UTF-8\n"
++"Content-Transfer-Encoding: 8bit\n"
++"X-Generator: KBabel 1.11.4\n"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid "Should /usr/sbin/hddtemp be installed SUID root?"
++msgstr "Deve o /usr/sbin/hddtemp ser instalado com SUID root?"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"You have the option of installing hddtemp with the SUID bit set, allowing it "
++"to be run (reporting hard drive temperatures) by regular users and not only "
++"the superuser."
++msgstr ""
++"Você tem a opção de instalar o hddtemp com o SUID, permitindo-o ser "
++"executado (relatar temperaturas do disco rigido) por utilizadores normais e "
++"não apenas pelo super utilizador."
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"This could potentially allow hddtemp to be used during an attack against the "
++"computer's security. If in doubt, do not choose this option."
++msgstr ""
++"Isto pode potencialmente permitir que o hddtemp seja utilizado num ataque "
++"contra a segurança do computador. Em caso de dúvida, não escolha esta opção."
++
++#. Type: boolean
++#. Description
++#. Type: boolean
++#. Description
++#: ../templates:2001 ../templates:4001
++msgid ""
++"This setting can be modified later by running 'dpkg-reconfigure hddtemp'."
++msgstr ""
++"Esta opção pode ser modificada mais tarde executando 'dpkg-reconfigure "
++"hddtemp'."
++
++#. Type: string
++#. Description
++#: ../templates:3001
++msgid "Interval between hard drive temperature checks:"
++msgstr "Intervalo entre verificações da temperatura do disco rigido:"
++
++#. Type: string
++#. Description
++#: ../templates:3001
++msgid ""
++"The temperature of the hard drive(s) can be logged by hddtemp via the "
++"generic system logging interface."
++msgstr ""
++"A temperatura do(s) disco(s) rÃgido(s) podem ser guardados pelo hddtemp "
++"através da interface genérica do sistema para guardar registos."
++
++#. Type: string
++#. Description
++#: ../templates:3001
++msgid ""
++"Please enter a value in seconds corresponding to the interval between two "
++"checks. To disable this feature, enter 0."
++msgstr ""
++"Por favor introduza um valor em segundos correspondendo ao intervalo entre "
++"duas verificações. Para desactivar esta opção, introduza 0."
++
++#. Type: boolean
++#. Description
++#: ../templates:4001
++msgid "Should the hddtemp daemon be started at boot?"
++msgstr "Deseja iniciar o daemon hddtemp no arranque?"
++
++#. Type: boolean
++#. Description
++#: ../templates:4001
++msgid ""
++"The hddtemp program can be run as a daemon, listening on port 7634 for "
++"incoming connections. It is used by some software such as gkrellm to get the "
++"temperature of hard drives."
++msgstr ""
++"O programa hddtemp pode ser executado como um daemon, Ã escuta na porta "
++"7634. É utilizada por alguns programas como o gkrellm para obter a "
++"temperatura dos discos rÃgidos."
++
++#. Type: boolean
++#. Description
++#: ../templates:4001
++msgid ""
++"You have the option of starting the hddtemp daemon automatically on system "
++"boot. If in doubt, it is suggested to not start it automatically on boot."
++msgstr ""
++"Você tem a opção de executar o daemon hddtemp automaticamente no arranque do "
++"sistema. Se estiver em dúvida, é sugerido que não o inicie automaticamente "
++"no arranque."
++
++#. Type: string
++#. Description
++#: ../templates:5001
++msgid "Interface to listen on:"
++msgstr "Interface para utilizar na escuta:"
++
++#. Type: string
++#. Description
++#: ../templates:5001
++msgid ""
++"The hddtemp program can listen for incoming connections on a specific "
++"interface, or on all interfaces."
++msgstr ""
++"O programa hddtemp pode escutar por ligações de entrada numa interface "
++"especÃfica, ou em todas as interfaces."
++
++#. Type: string
++#. Description
++#: ../templates:5001
++msgid ""
++"To listen on a specific interface, enter the IP address of that interface "
++"(choosing 127.0.0.1 will accept local connections only). To listen on all "
++"interfaces, enter 0.0.0.0."
++msgstr ""
++"Para escutar numa interface especÃfica, introduza o endereço IP dessa "
++"interface (escolhendo 127.0.0.1 irá aceitar apenas ligações locais). Para "
++"escutar em todas as interfaces, introduza 0.0.0.0."
++
++#. Type: string
++#. Description
++#: ../templates:6001
++msgid "Port to listen on:"
++msgstr "Porta a utilizar na escuta:"
++
++#. Type: string
++#. Description
++#: ../templates:6001
++msgid ""
++"By default, hddtemp listens for incoming connections on port 7634. This can "
++"be changed for another port number."
++msgstr ""
++"O hddtemp escuta por ligações de entrada na porta 7634 por pré-definição. "
++"Isto pode ser alterado para outra porta."
+--- hddtemp-0.3-beta15.orig/debian/po/eu.po
++++ hddtemp-0.3-beta15/debian/po/eu.po
+@@ -0,0 +1,111 @@
++# SOME DESCRIPTIVE TITLE.
++# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
++# This file is distributed under the same license as the PACKAGE package.
++# Piarres Beobide <pi+debian at beobide.net>, 2008.
++
++
++msgid ""
++msgstr ""
++"Project-Id-Version: hddtemp-debconf\n"
++"Report-Msgid-Bugs-To: hddtemp at packages.debian.org\n"
++"POT-Creation-Date: 2008-01-25 22:35+0100\n"
++"PO-Revision-Date: 2008-02-14 12:11+0100\n"
++"Last-Translator: Piarres Beobide <pi+debian at beobide.net>\n"
++"Language-Team: Euskara <Librezale at librezale.org>\n"
++"MIME-Version: 1.0\n"
++"Content-Type: text/plain; charset=utf-8\n"
++"Content-Transfer-Encoding: 8bit\n"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid "Should /usr/sbin/hddtemp be installed SUID root?"
++msgstr "/usr/sbin/hddtemp SUID bit-a gaiturik duela instalatu behar da?"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid "You have the option of installing hddtemp with the SUID bit set, allowing it to be run (reporting hard drive temperatures) by regular users and not only the superuser."
++msgstr "Zuk hddtemp SUID bit-a ezarria duela instalatzeko aukera duzu supererabiltzaileak bakarrik beharrean erabiltzaile arrunti exekutatzeko (disko gogor tenperaturak erreportatzeko) baimena emanez."
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid "This could potentially allow hddtemp to be used during an attack against the computer's security. If in doubt, do not choose this option."
++msgstr "Honek ordenagailuari eraso batetan hddtemp erabiltzeko aukera ematen du. Zalantzarik baduzu ez hautatu aukera hau."
++
++#. Type: boolean
++#. Description
++#. Type: boolean
++#. Description
++#: ../templates:2001
++#: ../templates:4001
++msgid "This setting can be modified later by running 'dpkg-reconfigure hddtemp'."
++msgstr "Ezarpen hau beranduago aldatu daiteke 'dpkg-reconfigure hddtemp' abiaraziz."
++
++#. Type: string
++#. Description
++#: ../templates:3001
++msgid "Interval between hard drive temperature checks:"
++msgstr "Disko gogor tenperatura arakatzeen arteko denbora tartea:"
++
++#. Type: string
++#. Description
++#: ../templates:3001
++msgid "The temperature of the hard drive(s) can be logged by hddtemp via the generic system logging interface."
++msgstr "Hddtemp-ek disko gorren tenperatura sistemako erregistro interfaze orokorraren bidez erregistratu dezake."
++
++#. Type: string
++#. Description
++#: ../templates:3001
++msgid "Please enter a value in seconds corresponding to the interval between two checks. To disable this feature, enter 0."
++msgstr "Mesedez idatzi bi arakatzeen arteko denbora tartea segunduetan. Ezaugarri hau ezgaitzeko 0 ezarri."
++
++#. Type: boolean
++#. Description
++#: ../templates:4001
++msgid "Should the hddtemp daemon be started at boot?"
++msgstr "Hddtemp deabrua sistema abiaraztean abiarazi behar al da?"
++
++#. Type: boolean
++#. Description
++#: ../templates:4001
++msgid "The hddtemp program can be run as a daemon, listening on port 7634 for incoming connections. It is used by some software such as gkrellm to get the temperature of hard drives."
++msgstr "Hddtemp programa deabru bat bezala erabili daiteke, sarrera konexioak 7624 atakan entzungo ditu. Hau gkrellm bezalako zenbait softwarek disko gogorren tenperatura eskuratzeko erabiltzen dute."
++
++#. Type: boolean
++#. Description
++#: ../templates:4001
++msgid "You have the option of starting the hddtemp daemon automatically on system boot. If in doubt, it is suggested to not start it automatically on boot."
++msgstr "Zuk hddtemp deabrua sistema abiaraztean automatikoki abiarazteko aukera duzu. Zalantzarik baduzu abioan ez automatikoki abiaraztea gomendatzen da."
++
++#. Type: string
++#. Description
++#: ../templates:5001
++msgid "Interface to listen on:"
++msgstr "Entzungo den interfazea:"
++
++#. Type: string
++#. Description
++#: ../templates:5001
++msgid "The hddtemp program can listen for incoming connections on a specific interface, or on all interfaces."
++msgstr "Hddtemp programak sarrera konexioak interfaze zehatz batetan bakarrik edo guztietan entzuteko aukera du."
++
++#. Type: string
++#. Description
++#: ../templates:5001
++msgid "To listen on a specific interface, enter the IP address of that interface (choosing 127.0.0.1 will accept local connections only). To listen on all interfaces, enter 0.0.0.0."
++msgstr "Interfaze zehatz batetan entzuteko, idatzi interfaze horren IP helbidea (127.0.0.1 ipiniaz konexioa lokalak bakarrik onartuko dira). Interfaze guztietan entzuteko , 0.0.0.0 idatzi."
++
++#. Type: string
++#. Description
++#: ../templates:6001
++msgid "Port to listen on:"
++msgstr "Entzuteko ataka:"
++
++#. Type: string
++#. Description
++#: ../templates:6001
++msgid "By default, hddtemp listens for incoming connections on port 7634. This can be changed for another port number."
++msgstr "Lehenetspen modura hddtemp-ek sarrera konexioak 7634 atakan entzungo ditu. Auker ahonen bidez betste ataka bat ezartzeko auekra dago."
++
+--- hddtemp-0.3-beta15.orig/debian/po/it.po
++++ hddtemp-0.3-beta15/debian/po/it.po
+@@ -0,0 +1,155 @@
++# Italian translation of the hddtemp debconf template
++# This file is distributed under the same license as the hddtemp package
++# Copyright (C) 2008 Free Software Foundation, Inc.
++# Luca Monducci <luca.mo at tiscali.it>, 2008.
++#
++msgid ""
++msgstr ""
++"Project-Id-Version: hddtemp 0.3\n"
++"Report-Msgid-Bugs-To: hddtemp at packages.debian.org\n"
++"POT-Creation-Date: 2008-01-25 22:35+0100\n"
++"PO-Revision-Date: 2008-02-09 21:52+0100\n"
++"Last-Translator: Luca Monducci <luca.mo at tiscali.it>\n"
++"Language-Team: Italian <debian-l10n-italian at lists.debian.org>\n"
++"MIME-Version: 1.0\n"
++"Content-Type: text/plain; charset=UTF-8\n"
++"Content-Transfer-Encoding: 8bit\n"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid "Should /usr/sbin/hddtemp be installed SUID root?"
++msgstr "Installare /usr/sbin/hddtemp con il SUID root?"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"You have the option of installing hddtemp with the SUID bit set, allowing it "
++"to be run (reporting hard drive temperatures) by regular users and not only "
++"the superuser."
++msgstr ""
++"È possibile installare hddtemp con il bit SUID attivo, questo consente a un "
++"utente normale, e non solo al superuser, di eseguire il programma "
++"(riportando le temperature dei dischi)."
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"This could potentially allow hddtemp to be used during an attack against the "
++"computer's security. If in doubt, do not choose this option."
++msgstr ""
++"Questo potrebbe permettere l'uso di hddtemp durante un attacco alla "
++"sicurezza del sistema. In caso di dubbi, non attivare questa opzione."
++
++#. Type: boolean
++#. Description
++#. Type: boolean
++#. Description
++#: ../templates:2001 ../templates:4001
++msgid ""
++"This setting can be modified later by running 'dpkg-reconfigure hddtemp'."
++msgstr ""
++"In seguito, per modificare questa impostazione si può usare \"dpkg-"
++"reconfigure hddtemp\"."
++
++#. Type: string
++#. Description
++#: ../templates:3001
++msgid "Interval between hard drive temperature checks:"
++msgstr "Intervallo fra due controlli della temperatura dei dischi:"
++
++#. Type: string
++#. Description
++#: ../templates:3001
++msgid ""
++"The temperature of the hard drive(s) can be logged by hddtemp via the "
++"generic system logging interface."
++msgstr ""
++"La temperatura dei dischi può essere registrata da hddtemp tramite "
++"l'interfaccia generica offerta dal log di sistema."
++
++#. Type: string
++#. Description
++#: ../templates:3001
++msgid ""
++"Please enter a value in seconds corresponding to the interval between two "
++"checks. To disable this feature, enter 0."
++msgstr ""
++"Inserire il valore in secondi corrispondente all'intervallo fra due "
++"controlli. Per non utilizzare questa funzionalità inserire 0."
++
++#. Type: boolean
++#. Description
++#: ../templates:4001
++msgid "Should the hddtemp daemon be started at boot?"
++msgstr "Far partire il demone hddtemp all'avvio del sistema?"
++
++#. Type: boolean
++#. Description
++#: ../templates:4001
++msgid ""
++"The hddtemp program can be run as a daemon, listening on port 7634 for "
++"incoming connections. It is used by some software such as gkrellm to get the "
++"temperature of hard drives."
++msgstr ""
++"Il programma hddtemp può essere avviato come un demone in ascolto di "
++"connessioni in arrivo sulla porta 7634. Viene usato da programmi come "
++"gkrellm per recuperare la temperatura dei dischi fissi."
++
++#. Type: boolean
++#. Description
++#: ../templates:4001
++msgid ""
++"You have the option of starting the hddtemp daemon automatically on system "
++"boot. If in doubt, it is suggested to not start it automatically on boot."
++msgstr ""
++"È possibile far partire automaticamente il demone hddtemp all'avvio del "
++"sistema. In caso di dubbi, si suggerisce di non far partire il demone "
++"all'avvio."
++
++#. Type: string
++#. Description
++#: ../templates:5001
++msgid "Interface to listen on:"
++msgstr "Interfaccia su cui ascoltare:"
++
++#. Type: string
++#. Description
++#: ../templates:5001
++msgid ""
++"The hddtemp program can listen for incoming connections on a specific "
++"interface, or on all interfaces."
++msgstr ""
++"Il programma hddtemp può mettersi in ascolto di connessioni in arrivo su una "
++"particolare interfaccia oppure su tutte."
++
++#. Type: string
++#. Description
++#: ../templates:5001
++msgid ""
++"To listen on a specific interface, enter the IP address of that interface "
++"(choosing 127.0.0.1 will accept local connections only). To listen on all "
++"interfaces, enter 0.0.0.0."
++msgstr ""
++"Per ascoltare su una specifica interfaccia, inserire l'indirizzo IP di tale "
++"interfaccia (con 127.0.0.1 saranno accettate solo connesioni locali). Per "
++"ascoltare su tutte le interfacce inserire 0.0.0.0."
++
++#. Type: string
++#. Description
++#: ../templates:6001
++msgid "Port to listen on:"
++msgstr "Porta su cui ascoltare:"
++
++#. Type: string
++#. Description
++#: ../templates:6001
++msgid ""
++"By default, hddtemp listens for incoming connections on port 7634. This can "
++"be changed for another port number."
++msgstr ""
++"Con la configurazione predefinita hddtemp si mette in ascolto di connessioni "
++"in arrivo sulla porta 7634. È possibile cambiare questo valore con un altro "
++"numero di porta."
+--- hddtemp-0.3-beta15.orig/debian/po/de.po
++++ hddtemp-0.3-beta15/debian/po/de.po
+@@ -0,0 +1,164 @@
++# translation of hddtemp_0.3-beta15-39_de.po to German
++#
++# Translators, if you are not familiar with the PO format, gettext
++# documentation is worth reading, especially sections dedicated to
++# this format, e.g. by running:
++# info -n '(gettext)PO Files'
++# info -n '(gettext)Header Entry'
++# Some information specific to po-debconf are available at
++# /usr/share/doc/po-debconf/README-trans
++# or http://www.debian.org/intl/l10n/po-debconf/README-trans#
++# Developers do not need to manually edit POT or PO files.
++#
++# Erik Schanze <eriks at debian.org>, 2004-2008.
++msgid ""
++msgstr ""
++"Project-Id-Version: hddtemp_0.3-beta15-39_de\n"
++"Report-Msgid-Bugs-To: hddtemp at packages.debian.org\n"
++"POT-Creation-Date: 2008-01-25 22:35+0100\n"
++"PO-Revision-Date: 2008-01-27 21:18+0100\n"
++"Last-Translator: Erik Schanze <eriks at debian.org>\n"
++"Language-Team: German <debian-l10n-german at lists.debian.org>\n"
++"MIME-Version: 1.0\n"
++"Content-Type: text/plain; charset=UTF-8\n"
++"Content-Transfer-Encoding: 8bit\n"
++"X-Generator: KBabel 1.11.4\n"
++"Plural-Forms: nplurals=2; plural=(n != 1);\n"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid "Should /usr/sbin/hddtemp be installed SUID root?"
++msgstr "Soll /usr/sbin/hddtemp mit Root-Rechten ausgestattet werden?"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"You have the option of installing hddtemp with the SUID bit set, allowing it "
++"to be run (reporting hard drive temperatures) by regular users and not only "
++"the superuser."
++msgstr ""
++"Sie haben die Möglichkeit, Hddtemp bei der Installation mit Root-Rechten "
++"auszustatten. Damit kann es von jedem normalen Benutzer (und nicht nur von "
++"Root) gestartet werden, um die Festplattentemperatur zu melden."
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"This could potentially allow hddtemp to be used during an attack against the "
++"computer's security. If in doubt, do not choose this option."
++msgstr ""
++"Dadurch könnte es aber möglich sein, die Sicherheit des Rechners "
++"anzugreifen. Wenn Sie sich nicht sicher sind, lehnen Sie hier ab."
++
++#. Type: boolean
++#. Description
++#. Type: boolean
++#. Description
++#: ../templates:2001 ../templates:4001
++msgid ""
++"This setting can be modified later by running 'dpkg-reconfigure hddtemp'."
++msgstr ""
++"Diese Einstellung kann später durch den Befehl 'dpkg-reconfigure hddtemp' "
++"geändert werden."
++
++#. Type: string
++#. Description
++#: ../templates:3001
++msgid "Interval between hard drive temperature checks:"
++msgstr "Zeitraum zwischen den Überprüfungen der Festplattentemperatur:"
++
++#. Type: string
++#. Description
++#: ../templates:3001
++msgid ""
++"The temperature of the hard drive(s) can be logged by hddtemp via the "
++"generic system logging interface."
++msgstr ""
++"Die Temperatur der Festplatte(n) kann von Hddtemp mittels der allgemeinen "
++"System-Protokollierschnittstelle fortlaufend gespeichert werden."
++
++#. Type: string
++#. Description
++#: ../templates:3001
++msgid ""
++"Please enter a value in seconds corresponding to the interval between two "
++"checks. To disable this feature, enter 0."
++msgstr ""
++"Bitte geben Sie die Zeitspanne zwischen zwei Überprüfungen in Sekunden ein. "
++"Um diese Funktion abzuschalten, geben Sie 0 ein."
++
++#. Type: boolean
++#. Description
++#: ../templates:4001
++msgid "Should the hddtemp daemon be started at boot?"
++msgstr "Den Hddtemp-Dienst beim Hochfahren des Systems starten?"
++
++#. Type: boolean
++#. Description
++#: ../templates:4001
++msgid ""
++"The hddtemp program can be run as a daemon, listening on port 7634 for "
++"incoming connections. It is used by some software such as gkrellm to get the "
++"temperature of hard drives."
++msgstr ""
++"Hddtemp kann als Dienst betrieben werden und wartet am Port 7634 auf "
++"ankommende Verbindungen. Das wird von einigen Programmen wie Gkrellm "
++"genutzt, um die Temperatur der Festplatten abzufragen."
++
++#. Type: boolean
++#. Description
++#: ../templates:4001
++msgid ""
++"You have the option of starting the hddtemp daemon automatically on system "
++"boot. If in doubt, it is suggested to not start it automatically on boot."
++msgstr ""
++"Sie haben die Möglichkeit, den Dienst Hddtemp beim Hochfahren des Systems "
++"automatisch zu starten. Wenn Sie sich nicht sicher sind, starten Sie den "
++"Dienst nicht automatisch beim Hochfahren."
++
++#. Type: string
++#. Description
++#: ../templates:5001
++msgid "Interface to listen on:"
++msgstr "Schnittstelle, an der auf Anfragen gewartet wird:"
++
++#. Type: string
++#. Description
++#: ../templates:5001
++msgid ""
++"The hddtemp program can listen for incoming connections on a specific "
++"interface, or on all interfaces."
++msgstr ""
++"Hddtemp kann an einer speziellen oder an allen Schnittstelle auf ankommende "
++"Verbindungen warten."
++
++#. Type: string
++#. Description
++#: ../templates:5001
++msgid ""
++"To listen on a specific interface, enter the IP address of that interface "
++"(choosing 127.0.0.1 will accept local connections only). To listen on all "
++"interfaces, enter 0.0.0.0."
++msgstr ""
++"Um an einer einzelnen Schnittstelle auf Anfragen zu warten, geben Sie deren "
++"IP-Adresse ein (Falls Sie 127.0.0.1 wählen, sind nur lokale Verbindungen "
++"erlaubt). Um alle Schnittstellen zu verwenden, geben Sie 0.0.0.0 ein."
++
++#. Type: string
++#. Description
++#: ../templates:6001
++msgid "Port to listen on:"
++msgstr "Port, an dem auf Anfragen gewartet wird:"
++
++#. Type: string
++#. Description
++#: ../templates:6001
++msgid ""
++"By default, hddtemp listens for incoming connections on port 7634. This can "
++"be changed for another port number."
++msgstr ""
++"Normalerweise wartet Hddtemp am Port 7634 auf ankommende Verbindungen. Sie "
++"können auch eine andere Port-Nummer eingeben."
+--- hddtemp-0.3-beta15.orig/debian/po/gl.po
++++ hddtemp-0.3-beta15/debian/po/gl.po
+@@ -0,0 +1,176 @@
++# Galician translation of hddtemp's debconf templates
++# This file is distributed under the same license as the hddtemp package.
++# Jacobo Tarrio <jtarrio at debian.org>, 2007, 2008.
++#
++msgid ""
++msgstr ""
++"Project-Id-Version: hddtemp\n"
++"Report-Msgid-Bugs-To: hddtemp at packages.debian.org\n"
++"POT-Creation-Date: 2008-01-25 22:35+0100\n"
++"PO-Revision-Date: 2008-01-28 19:08+0000\n"
++"Last-Translator: Jacobo Tarrio <jtarrio at debian.org>\n"
++"Language-Team: Galician <proxecto at trasno.net>\n"
++"MIME-Version: 1.0\n"
++"Content-Type: text/plain; charset=UTF-8\n"
++"Content-Transfer-Encoding: 8bit\n"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid "Should /usr/sbin/hddtemp be installed SUID root?"
++msgstr "¿Quere instalar /usr/sbin/hddtemp con \"setuid\" root?"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"You have the option of installing hddtemp with the SUID bit set, allowing it "
++"to be run (reporting hard drive temperatures) by regular users and not only "
++"the superuser."
++msgstr ""
++"Ten a posibilidade de instalar hddtemp co bit SUID establecido, o que o "
++"permite executar (para que informe da temperatura dos discos duros) por "
++"parte de usuarios normais, e non só o administrador."
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"This could potentially allow hddtemp to be used during an attack against the "
++"computer's security. If in doubt, do not choose this option."
++msgstr ""
++"Con isto é posible que se empregue hddtemp durante un ataque contra a "
++"seguridade do ordenador. Se non está seguro, non escolla esta opción."
++
++#. Type: boolean
++#. Description
++#. Type: boolean
++#. Description
++#: ../templates:2001 ../templates:4001
++msgid ""
++"This setting can be modified later by running 'dpkg-reconfigure hddtemp'."
++msgstr ""
++"Esta elección pódese cambiar a posteriori executando \"dpkg-reconfigure "
++"hddtemp\"."
++
++#. Type: string
++#. Description
++#: ../templates:3001
++msgid "Interval between hard drive temperature checks:"
++msgstr "Intervalo entre comprobacións da temperatura do disco duro:"
++
++#. Type: string
++#. Description
++#: ../templates:3001
++msgid ""
++"The temperature of the hard drive(s) can be logged by hddtemp via the "
++"generic system logging interface."
++msgstr ""
++"O programa hddtemp pode manter un rexistro da temperatura do(s) disco(s) duro"
++"(s) empregando a interface xenérica de rexistro do sistema."
++
++#. Type: string
++#. Description
++#: ../templates:3001
++msgid ""
++"Please enter a value in seconds corresponding to the interval between two "
++"checks. To disable this feature, enter 0."
++msgstr ""
++"Introduza un valor en segundos correspondente ao intervalo entre "
++"comprobacións. Para desactivar esta caracterÃstica, introduza un 0."
++
++#. Type: boolean
++#. Description
++#: ../templates:4001
++msgid "Should the hddtemp daemon be started at boot?"
++msgstr "¿Quere iniciar o servizo de hddtemp co sistema?"
++
++#. Type: boolean
++#. Description
++#: ../templates:4001
++msgid ""
++"The hddtemp program can be run as a daemon, listening on port 7634 for "
++"incoming connections. It is used by some software such as gkrellm to get the "
++"temperature of hard drives."
++msgstr ""
++"Pódese executar o programa hddtemp coma un servizo que espera conexións "
++"entrantes no porto 7634. Emprégao algún software coma gkrellm para obter a "
++"temperatura dos discos duros."
++
++#. Type: boolean
++#. Description
++#: ../templates:4001
++msgid ""
++"You have the option of starting the hddtemp daemon automatically on system "
++"boot. If in doubt, it is suggested to not start it automatically on boot."
++msgstr ""
++"Ten a posibilidade de arrincar o servizo hddtemp automaticamente ao iniciar "
++"o sistema. Se ten dúbidas, suxÃrese que non o arrinque automaticamente ao "
++"iniciar o sistema."
++
++#. Type: string
++#. Description
++#: ../templates:5001
++msgid "Interface to listen on:"
++msgstr "Interface na que escoitar:"
++
++#. Type: string
++#. Description
++#: ../templates:5001
++msgid ""
++"The hddtemp program can listen for incoming connections on a specific "
++"interface, or on all interfaces."
++msgstr ""
++"O programa hddtemp pode esperar conexións entrantes nunha interface "
++"determinada ou en tódalas interfaces."
++
++#. Type: string
++#. Description
++#: ../templates:5001
++msgid ""
++"To listen on a specific interface, enter the IP address of that interface "
++"(choosing 127.0.0.1 will accept local connections only). To listen on all "
++"interfaces, enter 0.0.0.0."
++msgstr ""
++"Para escoitar nunha interface determinada, introduza o enderezo IP desa "
++"interface (se escolle 127.0.0.1 hanse aceptar só conexións locais). Para "
++"escoitar en tódalas interfaces, introduza 0.0.0.0."
++
++#. Type: string
++#. Description
++#: ../templates:6001
++msgid "Port to listen on:"
++msgstr "Porto no que escoitar:"
++
++#. Type: string
++#. Description
++#: ../templates:6001
++msgid ""
++"By default, hddtemp listens for incoming connections on port 7634. This can "
++"be changed for another port number."
++msgstr ""
++"Por defecto, hddtemp espera conexións entrantes no porto 7634. Pódese "
++"cambiar por outro porto."
++
++#~ msgid "You have the option of installing hddtemp with the SUID bit set."
++#~ msgstr "Ten a posibilidade de instalar hddtemp co bit SUID activado."
++
++#~ msgid ""
++#~ "If you make hddtemp SUID, unprivileged users of your systems will be able "
++#~ "to run it. This could, however, potentially allow hddtemp to be used "
++#~ "during a security attack on your computer. If in doubt, it is suggested "
++#~ "to install it without SUID. If you later change your mind, you can run: "
++#~ "'dpkg-reconfigure hddtemp'."
++#~ msgstr ""
++#~ "Se lle pon o bit SUID a hddtemp, os usuarios sen privilexios dos seus "
++#~ "sistemas han poder executalo. Nembargantes, isto pode permitir que se "
++#~ "empregue hddtemp durante un ataque á seguridade do seu ordenador. Se ten "
++#~ "dúbidas, é mellor que o instale sen SUID. Se cambia de opinión máis "
++#~ "adiante, pode executar \"dpkg-reconfigure hddtemp\"."
++
++#~ msgid ""
++#~ "hddtemp can periodically log the temperature of the hard drive(s) via the "
++#~ "SYSLOG interface."
++#~ msgstr ""
++#~ "hddtemp pode rexistrar periodicamente a temperatura das unidades de disco "
++#~ "mediante a interface SYSLOG."
+--- hddtemp-0.3-beta15.orig/debian/po/ar.po
++++ hddtemp-0.3-beta15/debian/po/ar.po
+@@ -0,0 +1,209 @@
++# translation of ar.po to
++#
++# Translators, if you are not familiar with the PO format, gettext
++# documentation is worth reading, especially sections dedicated to
++# this format, e.g. by running:
++# info -n '(gettext)PO Files'
++# info -n '(gettext)Header Entry'
++# Some information specific to po-debconf are available at
++# /usr/share/doc/po-debconf/README-trans
++# or http://www.debian.org/intl/l10n/po-debconf/README-trans#
++# Developers do not need to manually edit POT or PO files.
++#
++# Ossama M. Khayat, 2005.
++# Ossama M. Khayat <okhayat at yahoo.com>, 2010.
++msgid ""
++msgstr ""
++"Project-Id-Version: hddtemp_0.3-beta13-19\n"
++"Report-Msgid-Bugs-To: hddtemp at packages.debian.org\n"
++"POT-Creation-Date: 2008-01-25 22:35+0100\n"
++"PO-Revision-Date: 2010-09-09 04:48+0300\n"
++"Last-Translator: Ossama M. Khayat <okhayat at yahoo.com>\n"
++"Language-Team: Arabic <support at arabeyes.org>\n"
++"MIME-Version: 1.0\n"
++"Content-Type: text/plain; charset=UTF-8\n"
++"Content-Transfer-Encoding: 8bit\n"
++"X-Generator: Lokalize 1.0\n"
++"Plural-Forms: nplurals=6; plural=n==0 ? 0 : n==1 ? 1 : n==2 ? 2 : n%100>=3 "
++"&& n%100<=10 ? 3 : n%100>=11 && n%100<=99 ? 4 : 5;\n"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++#| msgid "Do you want /usr/sbin/hddtemp to be installed SUID root?"
++msgid "Should /usr/sbin/hddtemp be installed SUID root?"
++msgstr "هل يجب تثبيت /usr/sbin/hddtemp مع صلاØية SUID للمستخدم rootØŸ"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"You have the option of installing hddtemp with the SUID bit set, allowing it "
++"to be run (reporting hard drive temperatures) by regular users and not only "
++"the superuser."
++msgstr ""
++"لديك خيار تثبيت hddtemp مع صلاØية SUIDØŒ مما يسمØ"
++"للمستخدمين العاديين تشغيله (تقرير درجات Øرارة القرص الصلب) وليس Ùقط "
++"المستخدم الخارق."
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"This could potentially allow hddtemp to be used during an attack against the "
++"computer's security. If in doubt, do not choose this option."
++msgstr ""
++"قد يتسبب هذا باستخدام hddtemp أثناء الهجوم على"
++"أمن الجهاز. إن كنت ÙÙŠ شك، لا تنتق هذا الخيار."
++
++#. Type: boolean
++#. Description
++#. Type: boolean
++#. Description
++#: ../templates:2001 ../templates:4001
++msgid ""
++"This setting can be modified later by running 'dpkg-reconfigure hddtemp'."
++msgstr "يمكن تعديل هذا الإعداد لاØقاً بتنÙيذ الأمر 'dpkg-reconfigure hddtemp'."
++
++#. Type: string
++#. Description
++#: ../templates:3001
++msgid "Interval between hard drive temperature checks:"
++msgstr "الÙاصل الزمني للتØقق من Øرارة القرص الصلب:"
++
++#. Type: string
++#. Description
++#: ../templates:3001
++msgid ""
++"The temperature of the hard drive(s) can be logged by hddtemp via the "
++"generic system logging interface."
++msgstr ""
++"يستطيع hddtemp تسجيل Øرارة الأقراص الصلبة عبر "
++"واجهة سجلات النظام الاعتيادية."
++
++#. Type: string
++#. Description
++#: ../templates:3001
++#| msgid ""
++#| "Please enter a value in seconds corresponding to the interval between two "
++#| "checks. To disable this feature, simply enter 0."
++msgid ""
++"Please enter a value in seconds corresponding to the interval between two "
++"checks. To disable this feature, enter 0."
++msgstr ""
++"الرجاء إدخال قيمة بالثواني تØدد الÙاصل الزمني بين كل "
++"عملية. لتعطيل هذه الميزة، أدخل 0."
++
++#. Type: boolean
++#. Description
++#: ../templates:4001
++#| msgid "Do you want to start the hddtemp daemon on startup?"
++msgid "Should the hddtemp daemon be started at boot?"
++msgstr "هل تريد تشغيل عÙريت hddtemp عند الإقلاع؟"
++
++#. Type: boolean
++#. Description
++#: ../templates:4001
++#| msgid ""
++#| "hddtemp can be run as a daemon, listening on port 7634 for incoming "
++#| "connections. It is used some by software such as gkrellm to get the "
++#| "temperature of the hard drives."
++msgid ""
++"The hddtemp program can be run as a daemon, listening on port 7634 for "
++"incoming connections. It is used by some software such as gkrellm to get the "
++"temperature of hard drives."
++msgstr ""
++"يمكن تشغيل برنامج hddtemp كعÙريت، ÙŠÙصغي للمنÙØ° 7634 لأي"
++"اتصالات واردة. ÙŠÙستخدم البرنامج من قبل بعض البرامج الأخرى مثل gkrellm "
++"لمراقبة "
++"درجة Øرارة الأقراص الصلبة."
++
++#. Type: boolean
++#. Description
++#: ../templates:4001
++#| msgid ""
++#| "You have the option of starting the hddtemp daemon automatically on the "
++#| "computer startup. If in doubt, it is suggested to not start it "
++#| "automatically on startup. If you later change your mind, you can run: "
++#| "'dpkg-reconfigure hddtemp'."
++msgid ""
++"You have the option of starting the hddtemp daemon automatically on system "
++"boot. If in doubt, it is suggested to not start it automatically on boot."
++msgstr ""
++"لديك خيار تشغيل عÙريت hddtemp آلياً عند إقلاع "
++"النظام. إن كنت ÙÙŠ شك، ÙŠÙ‚ØªØ±Ø Ø¹Ø¯Ù… تشغيله آلياً عند الإقلاع."
++
++#. Type: string
++#. Description
++#: ../templates:5001
++msgid "Interface to listen on:"
++msgstr "الواجهة التي يصغي إليها:"
++
++#. Type: string
++#. Description
++#: ../templates:5001
++#| msgid ""
++#| "hddtemp can listen for incoming connections on a specific interface, or "
++#| "on all interfaces."
++msgid ""
++"The hddtemp program can listen for incoming connections on a specific "
++"interface, or on all interfaces."
++msgstr ""
++"يستطيع برنامج hddtemp الإصغاء للاتصالات الواردة على واجهة "
++"Ù…Øددة، أو جميع الواجهات."
++
++#. Type: string
++#. Description
++#: ../templates:5001
++#| msgid ""
++#| "To listen on a specific interface, enter the IP address of that "
++#| "interface (127.0.0.1 which is the default value corresponds to the lo "
++#| "interface). To listen on all interfaces, simply enter 0.0.0.0."
++msgid ""
++"To listen on a specific interface, enter the IP address of that interface "
++"(choosing 127.0.0.1 will accept local connections only). To listen on all "
++"interfaces, enter 0.0.0.0."
++msgstr ""
++"للإصغاء إلى واجهة Ù…Øددة، أدخل عنوان IP لتلك الواجهة "
++"(اختيار 127.0.0.1 سو٠يستقبل الاتصالات المØلية Ùقط). للإصغاء لجميع "
++"الواجهات، أدخل القيمة 0.0.0.0."
++
++#. Type: string
++#. Description
++#: ../templates:6001
++msgid "Port to listen on:"
++msgstr "المنÙØ° الذي يصغي إليه:"
++
++#. Type: string
++#. Description
++#: ../templates:6001
++#| msgid ""
++#| "By default, hddtemp listen for incoming connections on port 7634. However "
++#| "if you don't find this port appropriate, you can enter an other one."
++msgid ""
++"By default, hddtemp listens for incoming connections on port 7634. This can "
++"be changed for another port number."
++msgstr ""
++"بشكل اÙتراضي، يستمع hddtemp للاتصالات الواردة على المنÙØ° 7634. ويمكن"
++"تغيير هذا الرقم إلى آخر."
++
++#~ msgid "You have the option of installing hddtemp with the SUID bit set."
++#~ msgstr "لديك خيار تثبيت hddtemp بتعيين بت SUID."
++
++#~ msgid ""
++#~ "If you make hddtemp SUID, unprivileged users of your systems will be able "
++#~ "to run it. This could, however, potentially allow hddtemp to be used "
++#~ "during a security attack on your computer. If in doubt, it is suggested "
++#~ "to install it without SUID. If you later change your mind, you can run: "
++#~ "'dpkg-reconfigure hddtemp'."
++#~ msgstr ""
++#~ "إن قمت بتعيين hddtemp SUIDØŒ Ùسيستطيع المستخدمين الغير مخولين لنظامك "
++#~ "تشغيله. قد يتسبب هذا على أي Øال Ø¨Ø§Ù„Ø³Ù…Ø§Ø Ø¨Ø§Ø³ØªØ®Ø¯Ø§Ù… hddtemp أثناء الهجوم "
++#~ "الأمني على Øاسبك. إن كنت ÙÙŠ شك، Ø£Ù‚ØªØ±Ø ØªØ«Ø¨ÙŠØªÙ‡ دون تعيين SUID. إن بدلت رأيك "
++#~ "لاØقاً، يمكنك تشغيل: 'dpkg-reconfigure hddtemp'."
++
++#~ msgid ""
++#~ "hddtemp can periodically log the temperature of the hard drive(s) via the "
++#~ "SYSLOG interface."
++#~ msgstr ""
++#~ "يستطيع hddtemp تسجيل Øرارة الأقراص الصلبة بشكل دوري عبر واجهة SYSLOG."
+--- hddtemp-0.3-beta15.orig/debian/po/ja.po
++++ hddtemp-0.3-beta15/debian/po/ja.po
+@@ -0,0 +1,138 @@
++#
++# Translators, if you are not familiar with the PO format, gettext
++# documentation is worth reading, especially sections dedicated to
++# this format, e.g. by running:
++# info -n '(gettext)PO Files'
++# info -n '(gettext)Header Entry'
++#
++# Some information specific to po-debconf are available at
++# /usr/share/doc/po-debconf/README-trans
++# or http://www.debian.org/intl/l10n/po-debconf/README-trans
++#
++# Developers do not need to manually edit POT or PO files.
++#
++msgid ""
++msgstr ""
++"Project-Id-Version: hddtemp\n"
++"Report-Msgid-Bugs-To: hddtemp at packages.debian.org\n"
++"POT-Creation-Date: 2008-01-25 22:35+0100\n"
++"PO-Revision-Date: 2008-05-29 13:50+0900\n"
++"Last-Translator: Kenshi Muto <kmuto at debian.org>\n"
++"Language-Team: Japanese <debian-japanese at lists.debian.org>\n"
++"MIME-Version: 1.0\n"
++"Content-Type: text/plain; charset=UTF-8\n"
++"Content-Transfer-Encoding: 8bit\n"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid "Should /usr/sbin/hddtemp be installed SUID root?"
++msgstr "/usr/sbin/hddtemp ã‚’ SUID root ã§ã‚¤ãƒ³ã‚¹ãƒˆãƒ¼ãƒ«ã—ã¾ã™ã‹?"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"You have the option of installing hddtemp with the SUID bit set, allowing it "
++"to be run (reporting hard drive temperatures) by regular users and not only "
++"the superuser."
++msgstr "SUID ビットをè¨å®šã—㦠hddtemp をインストールã™ã‚‹ã‹ã©ã†ã‹ã‚’é¸æŠžã—ã¾ã™ã€‚ã“ã‚Œã¯ã€ã‚¹ãƒ¼ãƒ‘ーユーザã ã‘ã§ãªã一般ユーザã§ã‚‚ (ãƒãƒ¼ãƒ‰ãƒ‰ãƒ©ã‚¤ãƒ–ã®æ¸©åº¦ã®å ±å‘Šã‚’) 実行ã™ã‚‹ã“ã¨ã‚’許å¯ã™ã‚‹ã“ã¨ã«ãªã‚Šã¾ã™ã€‚"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"This could potentially allow hddtemp to be used during an attack against the "
++"computer's security. If in doubt, do not choose this option."
++msgstr "ã“ã‚Œã¯æ½œåœ¨çš„ã«ã¯ã‚³ãƒ³ãƒ”ュータã®ã‚»ã‚ュリティã«å¯¾ã™ã‚‹æ”»æ’ƒã«ä½¿ã‚れるå¯èƒ½æ€§ã‚’ hddtemp ã«è¨±ã™ã“ã¨ã«ãªã‚Šã¾ã™ã€‚ç–‘ã‚ã—ã‘ã‚Œã°ã€ã€Œã„ã„ãˆã€ã¨ç”ãˆã¦ãã ã•ã„。"
++
++#. Type: boolean
++#. Description
++#. Type: boolean
++#. Description
++#: ../templates:2001 ../templates:4001
++msgid ""
++"This setting can be modified later by running 'dpkg-reconfigure hddtemp'."
++msgstr "ã“ã®è¨å®šã¯ã‚ã¨ã§ 'dpkg-reconfigure hddtemp' を実行ã™ã‚‹ã“ã¨ã§å¤‰æ›´ã§ãã¾ã™ã€‚"
++
++#. Type: string
++#. Description
++#: ../templates:3001
++msgid "Interval between hard drive temperature checks:"
++msgstr "ãƒãƒ¼ãƒ‰ãƒ‰ãƒ©ã‚¤ãƒ–ã®æ¸©åº¦ãƒã‚§ãƒƒã‚¯ã®é–“隔インターãƒãƒ«:"
++
++#. Type: string
++#. Description
++#: ../templates:3001
++msgid ""
++"The temperature of the hard drive(s) can be logged by hddtemp via the "
++"generic system logging interface."
++msgstr "hddtemp ã§ãƒãƒ¼ãƒ‰ãƒ‰ãƒ©ã‚¤ãƒ–ã®æ¸©åº¦ã‚’一般的ãªã‚·ã‚¹ãƒ†ãƒ ãƒã‚®ãƒ³ã‚°ã‚¤ãƒ³ã‚¿ãƒ¼ãƒ•ã‚§ã‚¤ã‚¹ã‚’通ã—ã¦è¨˜éŒ²ã§ãã¾ã™ã€‚"
++
++#. Type: string
++#. Description
++#: ../templates:3001
++msgid ""
++"Please enter a value in seconds corresponding to the interval between two "
++"checks. To disable this feature, enter 0."
++msgstr "2ã¤ã®ãƒã‚§ãƒƒã‚¯ã®é–“ã®ã‚¤ãƒ³ã‚¿ãƒ¼ãƒãƒ«ã«ç›¸å½“ã™ã‚‹ç§’数を入力ã—ã¦ãã ã•ã„。ã“ã®æ©Ÿèƒ½ã‚’無効ã«ã™ã‚‹ã«ã¯ã€0 ã¨å…¥åŠ›ã—ã¦ãã ã•ã„。"
++
++#. Type: boolean
++#. Description
++#: ../templates:4001
++msgid "Should the hddtemp daemon be started at boot?"
++msgstr "起動時㫠hddtemp デーモンを開始ã—ã¾ã™ã‹?"
++
++#. Type: boolean
++#. Description
++#: ../templates:4001
++msgid ""
++"The hddtemp program can be run as a daemon, listening on port 7634 for "
++"incoming connections. It is used by some software such as gkrellm to get the "
++"temperature of hard drives."
++msgstr "hddtemp プãƒã‚°ãƒ©ãƒ ã¯ã€å…¥åŠ›æŽ¥ç¶šã®ãŸã‚ã®ãƒãƒ¼ãƒˆ 7634 をリスンã™ã‚‹ãƒ‡ãƒ¼ãƒ¢ãƒ³ã¨ã—ã¦å®Ÿè¡Œã§ãã¾ã™ã€‚ãƒãƒ¼ãƒ‰ãƒ‰ãƒ©ã‚¤ãƒ–ã®æ¸©åº¦ã‚’å¾—ã‚‹ãŸã‚ã«ã€gkrellm ã®ã‚ˆã†ãªã„ãã¤ã‹ã®ã‚½ãƒ•ãƒˆã‚¦ã‚§ã‚¢ã«ã‚ˆã£ã¦ä½¿ã‚ã‚Œã¾ã™ã€‚"
++
++#. Type: boolean
++#. Description
++#: ../templates:4001
++msgid ""
++"You have the option of starting the hddtemp daemon automatically on system "
++"boot. If in doubt, it is suggested to not start it automatically on boot."
++msgstr "コンピュータã®èµ·å‹•æ™‚ã« hddtemp デーモンを自動的ã«é–‹å§‹ã™ã‚‹é¸æŠžè‚¢ã§ã™ã€‚ç–‘ã‚ã—ã„ã®ã§ã‚ã‚Œã°ã€èµ·å‹•æ™‚ã«è‡ªå‹•çš„ã«ã¯é–‹å§‹ã—ãªã„ã“ã¨ã‚’æ案ã—ã¾ã™ã€‚"
++
++#. Type: string
++#. Description
++#: ../templates:5001
++msgid "Interface to listen on:"
++msgstr "リスンã™ã‚‹ã‚¤ãƒ³ã‚¿ãƒ¼ãƒ•ã‚§ã‚¤ã‚¹:"
++
++#. Type: string
++#. Description
++#: ../templates:5001
++msgid ""
++"The hddtemp program can listen for incoming connections on a specific "
++"interface, or on all interfaces."
++msgstr "hddtemp プãƒã‚°ãƒ©ãƒ ã¯ã€ç‰¹å®šã®ã‚¤ãƒ³ã‚¿ãƒ¼ãƒ•ã‚§ã‚¤ã‚¹ã¾ãŸã¯ã™ã¹ã¦ã®ã‚¤ãƒ³ã‚¿ãƒ¼ãƒ•ã‚§ã‚¤ã‚¹ã®å…¥åŠ›æŽ¥ç¶šã‚’リスンã§ãã¾ã™ã€‚"
++
++#. Type: string
++#. Description
++#: ../templates:5001
++msgid ""
++"To listen on a specific interface, enter the IP address of that interface "
++"(choosing 127.0.0.1 will accept local connections only). To listen on all "
++"interfaces, enter 0.0.0.0."
++msgstr "特定ã®ã‚¤ãƒ³ã‚¿ãƒ¼ãƒ•ã‚§ã‚¤ã‚¹ã‚’リスンã™ã‚‹ã«ã¯ã€ã‚¤ãƒ³ã‚¿ãƒ¼ãƒ•ã‚§ã‚¤ã‚¹ã® IP アドレスを入力ã—ã¦ãã ã•ã„ (127.0.0.1 ã‚’é¸ã¶ã¨ã€ãƒãƒ¼ã‚«ãƒ«ã®æŽ¥ç¶šã®ã¿ã‚’許å¯ã™ã‚‹ã‚ˆã†ã«ãªã‚Šã¾ã™)。ã™ã¹ã¦ã®ã‚¤ãƒ³ã‚¿ãƒ¼ãƒ•ã‚§ã‚¤ã‚¹ã‚’リスンã™ã‚‹ã«ã¯ã€0.0.0.0 ã¨å…¥åŠ›ã—ã¦ãã ã•ã„。"
++
++#. Type: string
++#. Description
++#: ../templates:6001
++msgid "Port to listen on:"
++msgstr "リスンã™ã‚‹ãƒãƒ¼ãƒˆ:"
++
++#. Type: string
++#. Description
++#: ../templates:6001
++msgid ""
++"By default, hddtemp listens for incoming connections on port 7634. This can "
++"be changed for another port number."
++msgstr "デフォルトã§ã¯ã€hddtemp ã¯ãƒãƒ¼ãƒˆ 7634 ã§å…¥åŠ›æŽ¥ç¶šã‚’リスンã—ã¾ã™ã€‚ã“ã‚Œã¯åˆ¥ã®ãƒãƒ¼ãƒˆç•ªå·ã«å¤‰æ›´ã§ãã¾ã™ã€‚"
+--- hddtemp-0.3-beta15.orig/debian/po/fi.po
++++ hddtemp-0.3-beta15/debian/po/fi.po
+@@ -0,0 +1,151 @@
++msgid ""
++msgstr ""
++"Project-Id-Version: hddtemp\n"
++"Report-Msgid-Bugs-To: hddtemp at packages.debian.org\n"
++"POT-Creation-Date: 2008-01-25 22:35+0100\n"
++"PO-Revision-Date: 2008-02-04 12:18+0200\n"
++"Last-Translator: Esko Arajärvi <edu at iki.fi>\n"
++"Language-Team: Finnish <debian-l10n-finnish at lists.debian.org>\n"
++"MIME-Version: 1.0\n"
++"Content-Type: text/plain; charset=UTF-8\n"
++"Content-Transfer-Encoding: 8bit\n"
++"X-Poedit-Language: Finnish\n"
++"X-Poedit-Country: FINLAND\n"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid "Should /usr/sbin/hddtemp be installed SUID root?"
++msgstr "Tulisiko /usr/sbin/hddtemp asentaa asetuksella SUID root?"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"You have the option of installing hddtemp with the SUID bit set, allowing it "
++"to be run (reporting hard drive temperatures) by regular users and not only "
++"the superuser."
++msgstr ""
++"Ohjelma hddtemp voidaan asentaa SUID-bitti asetettuna, jolloin pääkäyttäjien "
++"lisäksi myös tavalliset käyttäjät voivat ajaa ohjelman (saaden tietää "
++"kovalevyjen lämpötilat)."
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"This could potentially allow hddtemp to be used during an attack against the "
++"computer's security. If in doubt, do not choose this option."
++msgstr ""
++"Tämä saattaa mahdollistaa hddtempin käytön tietoturvahyökkäyksessä konetta "
++"vastaan. Jos olet epävarma, älä valitse tätä vaihtoehtoa."
++
++#. Type: boolean
++#. Description
++#. Type: boolean
++#. Description
++#: ../templates:2001 ../templates:4001
++msgid ""
++"This setting can be modified later by running 'dpkg-reconfigure hddtemp'."
++msgstr ""
++"Tätä asetusta voidaan myöhemmin muuttaa ajamalla komento â€dpkg-reconfigure "
++"hddtempâ€."
++
++#. Type: string
++#. Description
++#: ../templates:3001
++msgid "Interval between hard drive temperature checks:"
++msgstr "Aikaväli kovalevyjen lämpötilojen tarkistusten välillä:"
++
++#. Type: string
++#. Description
++#: ../templates:3001
++msgid ""
++"The temperature of the hard drive(s) can be logged by hddtemp via the "
++"generic system logging interface."
++msgstr ""
++"Kovalevyjen lämpötilat voidaan kirjoittaa yleiseen järjestelmälokiin "
++"hddtempin toimesta."
++
++#. Type: string
++#. Description
++#: ../templates:3001
++msgid ""
++"Please enter a value in seconds corresponding to the interval between two "
++"checks. To disable this feature, enter 0."
++msgstr ""
++"Anna tarkistusten välinen aika sekunneissa. Syötä 0 poistaaksesi tämän "
++"ominaisuuden käytöstä."
++
++#. Type: boolean
++#. Description
++#: ../templates:4001
++msgid "Should the hddtemp daemon be started at boot?"
++msgstr "Tulisiko hddtemp-taustaohjelma käynnistää käynnistettäessä tietokone?"
++
++#. Type: boolean
++#. Description
++#: ../templates:4001
++msgid ""
++"The hddtemp program can be run as a daemon, listening on port 7634 for "
++"incoming connections. It is used by some software such as gkrellm to get the "
++"temperature of hard drives."
++msgstr ""
++"Ohjelma hddtemp voidaan ajaa taustaohjelmana, joka kuuntelee yhteydenottoja "
++"portissa 7634. Jotkin ohjelmat, kuten gkrellm, käyttävät tätä hakeakseen "
++"kovalevyjen lämpötilat."
++
++#. Type: boolean
++#. Description
++#: ../templates:4001
++msgid ""
++"You have the option of starting the hddtemp daemon automatically on system "
++"boot. If in doubt, it is suggested to not start it automatically on boot."
++msgstr ""
++"hddtemp-taustaohjelma voidaan käynnistää automaattisesti käynnistettäessä "
++"järjestelmä. Jos olet epävarma, ohjelmaa ei suositella käynnistettäväksi "
++"automaattisesti."
++
++#. Type: string
++#. Description
++#: ../templates:5001
++msgid "Interface to listen on:"
++msgstr "Kuunneltavat liitynnät:"
++
++#. Type: string
++#. Description
++#: ../templates:5001
++msgid ""
++"The hddtemp program can listen for incoming connections on a specific "
++"interface, or on all interfaces."
++msgstr ""
++"Ohjelma hddtemp voi kuunnella yhteydenottoja tietystä liitynnästä tai "
++"kaikista liitynnöistä."
++
++#. Type: string
++#. Description
++#: ../templates:5001
++msgid ""
++"To listen on a specific interface, enter the IP address of that interface "
++"(choosing 127.0.0.1 will accept local connections only). To listen on all "
++"interfaces, enter 0.0.0.0."
++msgstr ""
++"Voit määrittää tietyn liitynnän antamalla sen IP-osoitteen (asetus 127.0.0.1 "
++"hyväksyy vain paikalliset yhteydet). Kaikki liitynnät määritetään "
++"asetuksella 0.0.0.0."
++
++#. Type: string
++#. Description
++#: ../templates:6001
++msgid "Port to listen on:"
++msgstr "Kuunneltava portti:"
++
++#. Type: string
++#. Description
++#: ../templates:6001
++msgid ""
++"By default, hddtemp listens for incoming connections on port 7634. This can "
++"be changed for another port number."
++msgstr ""
++"Oletuksena hddtemp kuuntelee yhteydenottoja portissa 7634. Tämä portin "
++"numero voidaan vaihtaa."
+--- hddtemp-0.3-beta15.orig/debian/po/templates.pot
++++ hddtemp-0.3-beta15/debian/po/templates.pot
+@@ -0,0 +1,131 @@
++# SOME DESCRIPTIVE TITLE.
++# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
++# This file is distributed under the same license as the PACKAGE package.
++# FIRST AUTHOR <EMAIL at ADDRESS>, YEAR.
++#
++#, fuzzy
++msgid ""
++msgstr ""
++"Project-Id-Version: PACKAGE VERSION\n"
++"Report-Msgid-Bugs-To: hddtemp at packages.debian.org\n"
++"POT-Creation-Date: 2008-01-25 22:35+0100\n"
++"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
++"Last-Translator: FULL NAME <EMAIL at ADDRESS>\n"
++"Language-Team: LANGUAGE <LL at li.org>\n"
++"MIME-Version: 1.0\n"
++"Content-Type: text/plain; charset=CHARSET\n"
++"Content-Transfer-Encoding: 8bit\n"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid "Should /usr/sbin/hddtemp be installed SUID root?"
++msgstr ""
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"You have the option of installing hddtemp with the SUID bit set, allowing it "
++"to be run (reporting hard drive temperatures) by regular users and not only "
++"the superuser."
++msgstr ""
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"This could potentially allow hddtemp to be used during an attack against the "
++"computer's security. If in doubt, do not choose this option."
++msgstr ""
++
++#. Type: boolean
++#. Description
++#. Type: boolean
++#. Description
++#: ../templates:2001 ../templates:4001
++msgid ""
++"This setting can be modified later by running 'dpkg-reconfigure hddtemp'."
++msgstr ""
++
++#. Type: string
++#. Description
++#: ../templates:3001
++msgid "Interval between hard drive temperature checks:"
++msgstr ""
++
++#. Type: string
++#. Description
++#: ../templates:3001
++msgid ""
++"The temperature of the hard drive(s) can be logged by hddtemp via the "
++"generic system logging interface."
++msgstr ""
++
++#. Type: string
++#. Description
++#: ../templates:3001
++msgid ""
++"Please enter a value in seconds corresponding to the interval between two "
++"checks. To disable this feature, enter 0."
++msgstr ""
++
++#. Type: boolean
++#. Description
++#: ../templates:4001
++msgid "Should the hddtemp daemon be started at boot?"
++msgstr ""
++
++#. Type: boolean
++#. Description
++#: ../templates:4001
++msgid ""
++"The hddtemp program can be run as a daemon, listening on port 7634 for "
++"incoming connections. It is used by some software such as gkrellm to get the "
++"temperature of hard drives."
++msgstr ""
++
++#. Type: boolean
++#. Description
++#: ../templates:4001
++msgid ""
++"You have the option of starting the hddtemp daemon automatically on system "
++"boot. If in doubt, it is suggested to not start it automatically on boot."
++msgstr ""
++
++#. Type: string
++#. Description
++#: ../templates:5001
++msgid "Interface to listen on:"
++msgstr ""
++
++#. Type: string
++#. Description
++#: ../templates:5001
++msgid ""
++"The hddtemp program can listen for incoming connections on a specific "
++"interface, or on all interfaces."
++msgstr ""
++
++#. Type: string
++#. Description
++#: ../templates:5001
++msgid ""
++"To listen on a specific interface, enter the IP address of that interface "
++"(choosing 127.0.0.1 will accept local connections only). To listen on all "
++"interfaces, enter 0.0.0.0."
++msgstr ""
++
++#. Type: string
++#. Description
++#: ../templates:6001
++msgid "Port to listen on:"
++msgstr ""
++
++#. Type: string
++#. Description
++#: ../templates:6001
++msgid ""
++"By default, hddtemp listens for incoming connections on port 7634. This can "
++"be changed for another port number."
++msgstr ""
+--- hddtemp-0.3-beta15.orig/debian/po/es.po
++++ hddtemp-0.3-beta15/debian/po/es.po
+@@ -0,0 +1,172 @@
++# hddtemp debconf translation to spanish
++# Copyright (C) 2003, 2006, 2008 Software in the Public Interest
++# This file is distributed under the same license as the hddtemp package.
++#
++# Changes:
++# - Initial translation
++# Carlos Valdivia Yagüe <valyag at dat.etsit.upm.es>, 2003
++# - Revisions:
++# Carlos Valdivia Yagüe <valyag at dat.etsit.upm.es>, 2006, 2008
++#
++# Translators, if you are not familiar with the PO format, gettext
++# documentation is worth reading, especially sections dedicated to
++# this format, e.g. by running:
++# info -n '(gettext)PO Files'
++# info -n '(gettext)Header Entry'
++#
++# Some information specific to po-debconf are available at
++# /usr/share/doc/po-debconf/README-trans
++# or http://www.debian.org/intl/l10n/po-debconf/README-trans
++#
++# Developers do not need to manually edit POT or PO files.
++#
++msgid ""
++msgstr ""
++"Project-Id-Version: hddtemp 0.3-beta15-39:\n"
++"Report-Msgid-Bugs-To: hddtemp at packages.debian.org\n"
++"POT-Creation-Date: 2008-01-25 22:35+0100\n"
++"PO-Revision-Date: 2008-01-31 16:50+0100\n"
++"Last-Translator: Carlos Valdivia Yagüe <valyag at dat.etsit.upm.es>\n"
++"Language-Team: Debian L10n Spanish <debian-l10n-spanish at lists.debian.org>\n"
++"MIME-Version: 1.0\n"
++"Content-Type: text/plain; charset=UTF-8\n"
++"Content-Transfer-Encoding: 8bit\n"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid "Should /usr/sbin/hddtemp be installed SUID root?"
++msgstr "¿Desea instalar «/usr/sbin/hddtemp» con el bit SUID root?"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"You have the option of installing hddtemp with the SUID bit set, allowing it "
++"to be run (reporting hard drive temperatures) by regular users and not only "
++"the superuser."
++msgstr ""
++"Puede instalar hddtemp con el bit SUID activado, permitiendo asà su "
++"ejecución (informando de la temperatura de los discos duros) por parte de "
++"usuarios normales y no sólo del superusuario."
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"This could potentially allow hddtemp to be used during an attack against the "
++"computer's security. If in doubt, do not choose this option."
++msgstr ""
++"Esto podrÃa permitir que se utilizara hddtemp para comprometer la seguridad "
++"del sistema durante un ataque. Si está en duda, se recomienda que no active "
++"el bit SUID."
++
++#. Type: boolean
++#. Description
++#. Type: boolean
++#. Description
++#: ../templates:2001 ../templates:4001
++msgid ""
++"This setting can be modified later by running 'dpkg-reconfigure hddtemp'."
++msgstr ""
++"Esta elección puede modificarse posteriormente ejecutando «dpkg-reconfigure "
++"hddtemp»."
++
++#. Type: string
++#. Description
++#: ../templates:3001
++msgid "Interval between hard drive temperature checks:"
++msgstr "PerÃodo entre dos comprobaciones de temperatura:"
++
++#. Type: string
++#. Description
++#: ../templates:3001
++msgid ""
++"The temperature of the hard drive(s) can be logged by hddtemp via the "
++"generic system logging interface."
++msgstr ""
++"La temperatura del disco o discos duros puede ser registrada por hddtemp "
++"mediante la interfaz de registro genérica del sistema."
++
++#. Type: string
++#. Description
++#: ../templates:3001
++msgid ""
++"Please enter a value in seconds corresponding to the interval between two "
++"checks. To disable this feature, enter 0."
++msgstr ""
++"Introduzca un valor en segundos para el perÃodo entre dos comprobaciones "
++"sucesivas. Para desactivar esta caracterÃstica, introduzca 0."
++
++#. Type: boolean
++#. Description
++#: ../templates:4001
++msgid "Should the hddtemp daemon be started at boot?"
++msgstr "¿Desea iniciar el demonio de hddtemp en el arranque del sistema?"
++
++#. Type: boolean
++#. Description
++#: ../templates:4001
++msgid ""
++"The hddtemp program can be run as a daemon, listening on port 7634 for "
++"incoming connections. It is used by some software such as gkrellm to get the "
++"temperature of hard drives."
++msgstr ""
++"hddtemp puede ejecutarse en modo demonio, escuchando conexiones entrantes en "
++"el puerto 7634. Algunos programas, como gkrellm, lo utilizan para obtener la "
++"temperatura de los discos duros."
++
++#. Type: boolean
++#. Description
++#: ../templates:4001
++msgid ""
++"You have the option of starting the hddtemp daemon automatically on system "
++"boot. If in doubt, it is suggested to not start it automatically on boot."
++msgstr ""
++"Puede iniciar el demonio de hddtemp automáticamente cada vez que arranque el "
++"sistema. Si está en duda, se recomienda que no lo inicie automáticamente al "
++"arrancar."
++
++#. Type: string
++#. Description
++#: ../templates:5001
++msgid "Interface to listen on:"
++msgstr "Interfaz en la que escuchar:"
++
++#. Type: string
++#. Description
++#: ../templates:5001
++msgid ""
++"The hddtemp program can listen for incoming connections on a specific "
++"interface, or on all interfaces."
++msgstr ""
++"hddtemp puede escuchar conexiones entrantes en una interfaz concreta, o bien "
++"en todas."
++
++#. Type: string
++#. Description
++#: ../templates:5001
++msgid ""
++"To listen on a specific interface, enter the IP address of that interface "
++"(choosing 127.0.0.1 will accept local connections only). To listen on all "
++"interfaces, enter 0.0.0.0."
++msgstr ""
++"Para escuchar en una interfaz determinada, introduzca la dirección IP de "
++"dicha interfaz (si elige 127.0.0.1 sólo se aceptarán conexiones locales). "
++"Para escuchar en todas las interfaces, introduzca 0.0.0.0."
++
++#. Type: string
++#. Description
++#: ../templates:6001
++msgid "Port to listen on:"
++msgstr "Puerto en el que escuchar:"
++
++#. Type: string
++#. Description
++#: ../templates:6001
++msgid ""
++"By default, hddtemp listens for incoming connections on port 7634. This can "
++"be changed for another port number."
++msgstr ""
++"De manera predeterminada hddtemp escucha en el puerto 7634, pero puede "
++"cambiarlo por otro."
+--- hddtemp-0.3-beta15.orig/debian/po/sk.po
++++ hddtemp-0.3-beta15/debian/po/sk.po
+@@ -0,0 +1,155 @@
++# Slovak translations for hddtemp package
++# Slovenské preklady pre balÃk hddtemp.
++# Copyright (C) 2011 THE hddtemp'S COPYRIGHT HOLDER
++# This file is distributed under the same license as the hddtemp package.
++# Automatically generated, 2011.
++# Slavko <linux at slavino.sk>, 2011.
++#
++msgid ""
++msgstr ""
++"Project-Id-Version: hddtemp 0.3-beta15-48\n"
++"Report-Msgid-Bugs-To: hddtemp at packages.debian.org\n"
++"POT-Creation-Date: 2008-01-25 22:35+0100\n"
++"PO-Revision-Date: 2011-08-30 16:30+0200\n"
++"Last-Translator: Slavko <linux at slavino.sk>\n"
++"Language-Team: Slovak <nomail>\n"
++"MIME-Version: 1.0\n"
++"Content-Type: text/plain; charset=UTF-8\n"
++"Content-Transfer-Encoding: 8bit\n"
++"Language: sk\n"
++"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid "Should /usr/sbin/hddtemp be installed SUID root?"
++msgstr "Má byť /usr/sbin/hddtemp nainštalovaný s SUID root?"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"You have the option of installing hddtemp with the SUID bit set, allowing it "
++"to be run (reporting hard drive temperatures) by regular users and not only "
++"the superuser."
++msgstr ""
++"Môžete si zvoliť inštaláciu hddtemp s nastaveným bitom SUID, ktorý dovoľuje "
++"jeho spustenie (hlásenie stavu teploty pevných diskov) obyÄajným "
++"použÃvateľom a nie len super-použÃvateľovi."
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"This could potentially allow hddtemp to be used during an attack against the "
++"computer's security. If in doubt, do not choose this option."
++msgstr ""
++"Toto môže potenciálne umožniÅ¥, aby bol hddtemp použitý poÄas útoku na "
++"bezpeÄnosÅ¥ poÄÃtaÄa. Ak si nie ste istý, nevyberajte túto možnosÅ¥."
++
++#. Type: boolean
++#. Description
++#. Type: boolean
++#. Description
++#: ../templates:2001 ../templates:4001
++msgid ""
++"This setting can be modified later by running 'dpkg-reconfigure hddtemp'."
++msgstr "Môžete to zmeniÅ¥ aj neskôr, spustenÃm „dpkg-reconfigure hddtempâ€."
++
++#. Type: string
++#. Description
++#: ../templates:3001
++msgid "Interval between hard drive temperature checks:"
++msgstr "Interval medzi kontrolami teploty pevného disku:"
++
++#. Type: string
++#. Description
++#: ../templates:3001
++msgid ""
++"The temperature of the hard drive(s) can be logged by hddtemp via the "
++"generic system logging interface."
++msgstr ""
++"Teplota pevného disko(ov) môže hddtemp zaznamenávaÅ¥ pomocou spoloÄného "
++"rozhrania systémových záznamov."
++
++#. Type: string
++#. Description
++#: ../templates:3001
++msgid ""
++"Please enter a value in seconds corresponding to the interval between two "
++"checks. To disable this feature, enter 0."
++msgstr ""
++"ProsÃm, zadajte hodnotu v sekundách, ktorá zodpovedá intervalu medzi dvomi "
++"meraniami. Na zakázanie tejto funkcie zadajte 0."
++
++#. Type: boolean
++#. Description
++#: ../templates:4001
++msgid "Should the hddtemp daemon be started at boot?"
++msgstr "Má byť démon hddtemp spustený pri zavedenà systému?"
++
++#. Type: boolean
++#. Description
++#: ../templates:4001
++msgid ""
++"The hddtemp program can be run as a daemon, listening on port 7634 for "
++"incoming connections. It is used by some software such as gkrellm to get the "
++"temperature of hard drives."
++msgstr ""
++"Program hddtemp môže byÅ¥ spustený ako démon, naÄúvajúci prÃchodzÃm spojeniam "
++"na porte 7634. Je to použÃvané niektorými programami, napr. gkrellm, na "
++"zÃskanie teploty pevných diskov."
++
++#. Type: boolean
++#. Description
++#: ../templates:4001
++msgid ""
++"You have the option of starting the hddtemp daemon automatically on system "
++"boot. If in doubt, it is suggested to not start it automatically on boot."
++msgstr ""
++"Môžete si zvoliť automatické spúšťanie démona hddtemp pri zavedenà systému. "
++"Ak si nie ste istý, odporúÄame nespúšťaÅ¥ ho automaticky pri azvedenÃ."
++
++#. Type: string
++#. Description
++#: ../templates:5001
++msgid "Interface to listen on:"
++msgstr "Rozhranie, na ktorom naÄúvaÅ¥:"
++
++#. Type: string
++#. Description
++#: ../templates:5001
++msgid ""
++"The hddtemp program can listen for incoming connections on a specific "
++"interface, or on all interfaces."
++msgstr ""
++"Program hddtemp môže oÄakávaÅ¥ prÃchodzie spojenia na zadanom rozhranà alebo "
++"na všetkých rozhraniach."
++
++#. Type: string
++#. Description
++#: ../templates:5001
++msgid ""
++"To listen on a specific interface, enter the IP address of that interface "
++"(choosing 127.0.0.1 will accept local connections only). To listen on all "
++"interfaces, enter 0.0.0.0."
++msgstr ""
++"Aby naÄúval na zadanom rozhranÃ, zadajte IP adresu daného rozhrania (zadanÃm "
++"127.0.0.1 budú prijÃmané len lokálne spojenia). Na naÄúvanie na vÅ¡etkých "
++"rozhraniach, zadajte 0.0.0.0."
++
++#. Type: string
++#. Description
++#: ../templates:6001
++msgid "Port to listen on:"
++msgstr "Port, na ktorom naÄúvaÅ¥:"
++
++#. Type: string
++#. Description
++#: ../templates:6001
++msgid ""
++"By default, hddtemp listens for incoming connections on port 7634. This can "
++"be changed for another port number."
++msgstr ""
++"Predvolene hddtemp oÄakáva prÃchodzie spojenia na porte 7634. Môžete to "
++"zmeniÅ¥ na akékoľvek iné ÄÃslo portu."
+--- hddtemp-0.3-beta15.orig/debian/po/POTFILES.in
++++ hddtemp-0.3-beta15/debian/po/POTFILES.in
+@@ -0,0 +1 @@
++[type: gettext/rfc822deb] templates
+--- hddtemp-0.3-beta15.orig/debian/po/nl.po
++++ hddtemp-0.3-beta15/debian/po/nl.po
+@@ -0,0 +1,159 @@
++# Dutch translation of hddtemp debconf templates.
++# Copyright (C) 2006-2011 THE PACKAGE'S COPYRIGHT HOLDER
++# This file is distributed under the same license as the hddtemp package.
++# Kurt De Bree <kdebree at telenet.be>, 2006.
++# Jeroen Schot <schot at a-eskwadraat.nl>, 2011.
++#
++msgid ""
++msgstr ""
++"Project-Id-Version: hddtemp 3.3-beta15-46\n"
++"Report-Msgid-Bugs-To: hddtemp at packages.debian.org\n"
++"POT-Creation-Date: 2008-01-25 22:35+0100\n"
++"PO-Revision-Date: 2011-06-01 08:31+0200\n"
++"Last-Translator: Jeroen Schot <schot at a-eskwadraat.nl>\n"
++"Language-Team: Debian l10n Dutch <debian-l10n-dutch at lists.debian.org>\n"
++"Language: nl\n"
++"MIME-Version: 1.0\n"
++"Content-Type: text/plain; charset=UTF-8\n"
++"Content-Transfer-Encoding: 8bit\n"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid "Should /usr/sbin/hddtemp be installed SUID root?"
++msgstr "Wilt u /usr/sbin/hddtemp als SUID root installeren?"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"You have the option of installing hddtemp with the SUID bit set, allowing it "
++"to be run (reporting hard drive temperatures) by regular users and not only "
++"the superuser."
++msgstr ""
++"U heeft de keuze om hddtemp te installeren met de SUID-bit ingesteld. Dit "
++"zorgt ervoor dat het kan worden uitgevoerd (en hardeschijf-temperatuur "
++"meldt) door gewone gebruikers en niet enkel de beheerder."
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"This could potentially allow hddtemp to be used during an attack against the "
++"computer's security. If in doubt, do not choose this option."
++msgstr ""
++"Hierdoor zou hddtemp mogelijk gebruikt kunnen worden bij aan aanval om de "
++"beveiling van de computer te omzeilen. Als u twijfelt, kies dan niet voor "
++"deze optie."
++
++#. Type: boolean
++#. Description
++#. Type: boolean
++#. Description
++#: ../templates:2001 ../templates:4001
++msgid ""
++"This setting can be modified later by running 'dpkg-reconfigure hddtemp'."
++msgstr ""
++"Deze instelling kan later worden gewijzigd door 'dpkg-reconfigure hddtemp' "
++"uit te voeren."
++
++#. Type: string
++#. Description
++#: ../templates:3001
++msgid "Interval between hard drive temperature checks:"
++msgstr "Interval tussen controles van de hardeschijf-temperatuur:"
++
++#. Type: string
++#. Description
++#: ../templates:3001
++msgid ""
++"The temperature of the hard drive(s) can be logged by hddtemp via the "
++"generic system logging interface."
++msgstr ""
++"De temperatuur van de harde schijven kan worden bijgehouden via de algemene "
++"systeemloginterface."
++
++#. Type: string
++#. Description
++#: ../templates:3001
++msgid ""
++"Please enter a value in seconds corresponding to the interval between two "
++"checks. To disable this feature, enter 0."
++msgstr ""
++"Geef een waarde (in seconden) overeenkomend met de interval tussen twee "
++"controles. '0' schakelt deze functie uit."
++
++#. Type: boolean
++#. Description
++#: ../templates:4001
++msgid "Should the hddtemp daemon be started at boot?"
++msgstr ""
++"Wilt u dat hddtemp-achtergronddienst wordt gestart bij de systeemstart?"
++
++#. Type: boolean
++#. Description
++#: ../templates:4001
++msgid ""
++"The hddtemp program can be run as a daemon, listening on port 7634 for "
++"incoming connections. It is used by some software such as gkrellm to get the "
++"temperature of hard drives."
++msgstr ""
++"Het hddtemp-programma kan worden uitgevoerd als achtergronddienst, "
++"luisterend naar inkomende verbindingen op poort 7634. Dit wordt gebruikt "
++"door sommige toepassingen zoals gkrellm om de temperatuur van de harde "
++"schijven op te halen."
++
++#. Type: boolean
++#. Description
++#: ../templates:4001
++msgid ""
++"You have the option of starting the hddtemp daemon automatically on system "
++"boot. If in doubt, it is suggested to not start it automatically on boot."
++msgstr ""
++"U heeft de optie om de hddtemp-achtergronddienst automatisch op te starten "
++"bij de systeemstart. Bij twijfel wordt aangeraden om de dienst niet "
++"automatisch op te starten."
++
++#. Type: string
++#. Description
++#: ../templates:5001
++msgid "Interface to listen on:"
++msgstr "De interface waarop hddtemp moet luisteren:"
++
++#. Type: string
++#. Description
++#: ../templates:5001
++msgid ""
++"The hddtemp program can listen for incoming connections on a specific "
++"interface, or on all interfaces."
++msgstr ""
++"Het hddtemp-programma kan naar inkomende verbindingen luisteren op één "
++"specifieke interface, of op alle interfaces."
++
++#. Type: string
++#. Description
++#: ../templates:5001
++msgid ""
++"To listen on a specific interface, enter the IP address of that interface "
++"(choosing 127.0.0.1 will accept local connections only). To listen on all "
++"interfaces, enter 0.0.0.0."
++msgstr ""
++"Om op één specifieke interface te luisteren, voer het IP-addres van deze "
++"interface in (als u 127.0.0.1 kiest zullen alleen lokale verbindingen worden "
++"geaccepeert). Om op alle interfaces te luisteren, voer 0.0.0.0. in."
++
++#. Type: string
++#. Description
++#: ../templates:6001
++msgid "Port to listen on:"
++msgstr "De poort waarop hddtemp moet luisteren:"
++
++#. Type: string
++#. Description
++#: ../templates:6001
++msgid ""
++"By default, hddtemp listens for incoming connections on port 7634. This can "
++"be changed for another port number."
++msgstr ""
++"Standaard luistert hddtemp naar inkomende verbindingen op poort 7634. Dit "
++"kan veranderd worden in een ander poortnummer."
+--- hddtemp-0.3-beta15.orig/debian/po/nb.po
++++ hddtemp-0.3-beta15/debian/po/nb.po
+@@ -0,0 +1,152 @@
++# translation of hddtemp_nb.po to Norwegian Bokmål
++# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
++# This file is distributed under the same license as the PACKAGE package.
++#
++# Bjørn Steensrud <bjornst at skogkatt.homelinux.org>, 2008.
++msgid ""
++msgstr ""
++"Project-Id-Version: hddtemp_nb\n"
++"Report-Msgid-Bugs-To: hddtemp at packages.debian.org\n"
++"POT-Creation-Date: 2008-01-25 22:35+0100\n"
++"PO-Revision-Date: 2008-01-27 17:39+0100\n"
++"Last-Translator: Bjørn Steensrud <bjornst at skogkatt.homelinux.org>\n"
++"Language-Team: Norwegian Bokmål <i18n-nb at lister.ping.uio.no>\n"
++"MIME-Version: 1.0\n"
++"Content-Type: text/plain; charset=UTF-8\n"
++"Content-Transfer-Encoding: 8bit\n"
++"X-Generator: KBabel 1.11.4\n"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid "Should /usr/sbin/hddtemp be installed SUID root?"
++msgstr "Skal /usr/sbin/hddtemp installeres med SUID root?"
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"You have the option of installing hddtemp with the SUID bit set, allowing it "
++"to be run (reporting hard drive temperatures) by regular users and not only "
++"the superuser."
++msgstr ""
++"Du kan installere hddtemp med SUID-biten satt, slik at vanlige brukere og "
++"ikke bare superbrukeren kan kjøre det for å undersøke temperatur på "
++"harddisken(e)."
++
++#. Type: boolean
++#. Description
++#: ../templates:2001
++msgid ""
++"This could potentially allow hddtemp to be used during an attack against the "
++"computer's security. If in doubt, do not choose this option."
++msgstr ""
++"Dette kan kanskje tillate at hddtemp blir brukt i et angrep mot systemets "
++"sikkerhet. Er du i tvil, så ikke velg dette."
++
++#. Type: boolean
++#. Description
++#. Type: boolean
++#. Description
++#: ../templates:2001 ../templates:4001
++msgid ""
++"This setting can be modified later by running 'dpkg-reconfigure hddtemp'."
++msgstr ""
++"Denne innstillingen kan endres senere ved å kjøre «dpkg-reconfigure hddtemp»."
++
++#. Type: string
++#. Description
++#: ../templates:3001
++msgid "Interval between hard drive temperature checks:"
++msgstr "Intervall mellom sjekker på disktemperaturen:"
++
++#. Type: string
++#. Description
++#: ../templates:3001
++msgid ""
++"The temperature of the hard drive(s) can be logged by hddtemp via the "
++"generic system logging interface."
++msgstr ""
++"hddtemp kan logge disken(e)s temperatur via systemets eget log-grensesnitt."
++
++#. Type: string
++#. Description
++#: ../templates:3001
++msgid ""
++"Please enter a value in seconds corresponding to the interval between two "
++"checks. To disable this feature, enter 0."
++msgstr ""
++"Oppgi en verdi i sekunder som tilsvarer intervallet mellom to sjekker. Dette "
++"blir slått av hvis verdien er 0."
++
++#. Type: boolean
++#. Description
++#: ../templates:4001
++msgid "Should the hddtemp daemon be started at boot?"
++msgstr "Skal hddtemp-daemonen startes ved oppstart?"
++
++#. Type: boolean
++#. Description
++#: ../templates:4001
++msgid ""
++"The hddtemp program can be run as a daemon, listening on port 7634 for "
++"incoming connections. It is used by some software such as gkrellm to get the "
++"temperature of hard drives."
++msgstr ""
++"hddtemp-programmet kan kjøres som en daemon som lytter på port 7634. Dette "
++"brukes av noen programmer slik som gkrellm for å finne temperaturen på "
++"harddisker."
++
++#. Type: boolean
++#. Description
++#: ../templates:4001
++msgid ""
++"You have the option of starting the hddtemp daemon automatically on system "
++"boot. If in doubt, it is suggested to not start it automatically on boot."
++msgstr ""
++"Du kan velge å starte hddtemp-daemonen automatisk når systemet starter opp. "
++"Er du i tvil, foreslår vi at den ikke startes automatisk ved oppstart."
++
++#. Type: string
++#. Description
++#: ../templates:5001
++msgid "Interface to listen on:"
++msgstr "Grensesnitt det skal lyttes på:"
++
++#. Type: string
++#. Description
++#: ../templates:5001
++msgid ""
++"The hddtemp program can listen for incoming connections on a specific "
++"interface, or on all interfaces."
++msgstr ""
++"hddtemp-programmet kan lytte etter inkommende tilkoblinger på et bestemt "
++"grensesnitt, eller alle grensesnitt."
++
++#. Type: string
++#. Description
++#: ../templates:5001
++msgid ""
++"To listen on a specific interface, enter the IP address of that interface "
++"(choosing 127.0.0.1 will accept local connections only). To listen on all "
++"interfaces, enter 0.0.0.0."
++msgstr ""
++"Oppgi grensesnittets IP-adresse for å lytte på det grensesnittet. (127.0.0.1 "
++"godtar bare lokale tilkoblinger). Oppgi 0.0.0.0 for å lytte på alle "
++"grensesnitt."
++
++#. Type: string
++#. Description
++#: ../templates:6001
++msgid "Port to listen on:"
++msgstr "Port å lytte på:"
++
++#. Type: string
++#. Description
++#: ../templates:6001
++msgid ""
++"By default, hddtemp listens for incoming connections on port 7634. This can "
++"be changed for another port number."
++msgstr ""
++"Standardporten der hddtemp lytter etter innkommende tilkoblinger er port "
++"7634. Dette kan endres til et annet portnummer."
+--- hddtemp-0.3-beta15.orig/doc/hddtemp.8
++++ hddtemp-0.3-beta15/doc/hddtemp.8
+@@ -58,6 +58,10 @@
+ .B \-f, \-\-file=\fIfile\fI
+ Specify the database file to use.
+ .TP
++.B \-F, \-\-foreground
++Don't fork into the background even in daemon mode. This is useful
++when running under a process supervisor.
++.TP
+ .B \-l, \-\-listen=\fIaddr\fR
+ Listen on a specific address. \fIaddr\fR is a string containing a
+ host name or a numeric host address string. The numeric host address
+@@ -80,6 +84,9 @@
+ .B \-q, \-\-quiet
+ Don't check if the drive is supported.
+ .TP
++.B \-u, \-\-unit=\fIC|F\fR
++Force output temperature either in Celsius or Fahrenheit.
++.TP
+ .B \-v, \-\-version
+ Display hddtemp version number.
+ .TP
+@@ -96,7 +103,7 @@
+ .SH "DRIVE DATABASE"
+ If you know your drive has a temperature sensor but it is being
+ reported unsupported, tell me which model and which manufacturer it
+-is, and/or just add a new entry in /usr/share/misc/hddtemp.db. Each
++is, and/or just add a new entry in /etc/hddtemp.db. Each
+ line of hddtemp.db is either a comment, a blank line or a line
+ containing:
+ .TP
+@@ -112,7 +119,7 @@
+ Feedback is welcome (see the REPORT section below).
+
+ .SH "TCP/IP DAEMON MODE"
+-Exemple of type forcing:
++Example of type forcing:
+ .PP
+ # hddtemp SATA:/dev/sda PATA:/dev/hda
+ .PP
+@@ -120,7 +127,7 @@
+ .B hddtemp
+ in daemon mode, start it like this:
+ .PP
+-# hddtemp -d /dev/hd[abcd]
++# hddtemp \-d /dev/hd[abcd]
+ .PP
+ .PP
+ and use
+@@ -165,8 +172,8 @@
+ investigation they do not. But fields 194 (which is the standard
+ field for temperature) and 231 are good candidates.
+ .PP
+-Then, you can send me a report with outputs from `hddtemp --debug ...',
+-`smartctl' or `hdparm -i ...', and/or add an entry in hddtemp.db
++Then, you can send me a report with outputs from `hddtemp \-\-debug ...',
++`smartctl' or `hdparm \-i ...', and/or add an entry in hddtemp.db
+ yourself.
+
+ .SH "BUGS"
+@@ -183,5 +190,5 @@
+ .PP
+ Emmanuel Varagnat (hddtemp at guzu.net).
+ .PP
+-This manual page was originaly written by Aurelien Jarno <aurel32 at debian.org>,
++This manual page was originally written by Aurelien Jarno <aurel32 at debian.org>,
+ for the Debian GNU/Linux system (but may be used by others).
+--- hddtemp-0.3-beta15.orig/po/fr.po
++++ hddtemp-0.3-beta15/po/fr.po
+@@ -7,9 +7,9 @@
+ msgid ""
+ msgstr ""
+ "Project-Id-Version: fr\n"
+-"Report-Msgid-Bugs-To: hddtemp at guzu.net\n"
+-"POT-Creation-Date: 2005-02-25 22:43+0100\n"
+-"PO-Revision-Date: 2003-06-03 00:58GMT+1\n"
++"Report-Msgid-Bugs-To: \n"
++"POT-Creation-Date: 2006-06-29 16:24+0200\n"
++"PO-Revision-Date: 2011-08-30 16:38+0200\n"
+ "Last-Translator: Aurelien Jarno <aurelien at aurel32.net>\n"
+ "Language-Team: FRANCAIS <fr at li.org>\n"
+ "MIME-Version: 1.0\n"
+@@ -17,23 +17,7 @@
+ "Content-Transfer-Encoding: 8bit\n"
+ "X-Generator: KBabel 1.0.1\n"
+
+-#: src/hddtemp.c:112
+-#, c-format
+-msgid ""
+-"\n"
+-"Regexp%s| Value | Description\n"
+-"------%s---------------------\n"
+-msgstr ""
+-"\n"
+-"Regexp%s| Valeur | Description\n"
+-"------%s----------------------\n"
+-
+-#: src/hddtemp.c:118
+-#, c-format
+-msgid "%s%s| %5d | %s\n"
+-msgstr "%s%s| %5d | %s\n"
+-
+-#: src/hddtemp.c:161
++#: src/hddtemp.c:156
+ #, c-format
+ msgid ""
+ "\n"
+@@ -46,7 +30,7 @@
+ "Modèle: %s\n"
+ "\n"
+
+-#: src/hddtemp.c:188
++#: src/hddtemp.c:189
+ #, c-format
+ msgid ""
+ "WARNING: Drive %s doesn't seem to have a temperature sensor.\n"
+@@ -60,75 +44,60 @@
+ "net).\n"
+ "ATTENTION : Voir les options --help, --debug et --drivebase.\n"
+
+-#: src/hddtemp.c:192
++#: src/hddtemp.c:197
+ #, c-format
+ msgid "%s: %s: no sensor\n"
+ msgstr "%s: %s : pas de capteur\n"
+
+-#: src/hddtemp.c:197
+-#, c-format
+-msgid ""
+-"WARNING: Drive %s doesn't appear in the database of supported drives\n"
+-"WARNING: But using a common value, it reports something.\n"
+-"WARNING: Note that the temperature shown could be wrong.\n"
+-"WARNING: See --help, --debug and --drivebase options.\n"
+-"WARNING: And don't forget you can add your drive to hddtemp.db\n"
+-msgstr ""
+-"ATTENTION : Le lecteur %s n'apparait pas dans la base de données des "
+-"lecteurs supportés\n"
+-"ATTENTION : Mais en utilisant une valeur courante, il renvoie quelque "
+-"chose.\n"
+-"ATTENTION : Notez que la température renvoyée peut être erronée.\n"
+-"ATTENTION : Voir les options --help, --debug et --drivebase.\n"
+-"ATTENTION : Et n'oubliez pas d'ajouter votre lecteur au fichier hddtemp.db\n"
+-
+-#: src/hddtemp.c:202
++#: src/hddtemp.c:211
+ #, c-format
+ msgid "%s: %s: %d%sC or %sF\n"
+ msgstr "%s: %s : %d%sC ou %sF\n"
+
+-#: src/hddtemp.c:214
++#: src/hddtemp.c:235
+ #, c-format
+ msgid "%s: %s: drive is sleeping\n"
+ msgstr "%s: %s : le lecteur est en veille\n"
+
+-#: src/hddtemp.c:217
++#: src/hddtemp.c:242
+ #, c-format
+-msgid "%s: %s: known drive, but it doesn't have a temperature sensor.\n"
++msgid "%s: %s: drive supported, but it doesn't have a temperature sensor.\n"
+ msgstr ""
+ "%s: %s: lecteur connu, mais il ne possède pas de capteur de température.\n"
+
+-#: src/hddtemp.c:220
++#: src/hddtemp.c:246
+ #, c-format
+ msgid "ERROR: %s: %s: unknown returned status\n"
+ msgstr "ERREUR : %s : %s : status inconnu\n"
+
+-#: src/hddtemp.c:235
++#: src/hddtemp.c:261
+ #, c-format
+ msgid ""
+ "\n"
+ "If one of the field value seems to match the temperature, be sure to read\n"
+-"the hddtemp man page before sending me a report (section REPORT). Thanks.\n"
++"the hddtemp man page before sending a report (section REPORT). Thanks.\n"
+ msgstr ""
+
+-#: src/hddtemp.c:308
++#: src/hddtemp.c:338
+ #, c-format
+ msgid "ERROR: invalid separator.\n"
+ msgstr "ERREUR : séparateur invalide.\n"
+
+-#: src/hddtemp.c:319
++#: src/hddtemp.c:349
+ #, c-format
+ msgid "ERROR: invalid port number.\n"
+ msgstr "ERREUR : numéro de port invalide.\n"
+
+-#: src/hddtemp.c:329
+-#, fuzzy, c-format
++#: src/hddtemp.c:371
++#, c-format
+ msgid ""
+-" Usage: hddtemp [OPTIONS] DISK1 [DISK2]...\n"
++" Usage: hddtemp [OPTIONS] [TYPE:]DISK1 [[TYPE:]DISK2]...\n"
+ "\n"
+ " hddtemp displays the temperature of drives supplied in argument.\n"
+ " Drives must support S.M.A.R.T.\n"
+ "\n"
++" TYPE could be SATA, PATA or SCSI. If omitted hddtemp will try to guess.\n"
++"\n"
+ " -b --drivebase : display database file content that allow hddtemp to\n"
+ " recognize supported drives.\n"
+ " -D --debug : display various S.M.A.R.T. fields and their values.\n"
+@@ -138,6 +107,7 @@
+ " -d --daemon : run hddtemp in TCP/IP daemon mode (port %d by "
+ "default.)\n"
+ " -f --file=FILE : specify database file to use.\n"
++" -F --foreground : don't daemonize, stay in foreground.\n"
+ " -l --listen=addr : listen on a specific interface (in TCP/IP daemon "
+ "mode).\n"
+ " -n --numeric : print only the temperature.\n"
+@@ -145,6 +115,8 @@
+ " -s --separator=C : separator to use between fields (in TCP/IP daemon "
+ "mode).\n"
+ " -S --syslog=s : log temperature to syslog every s seconds.\n"
++" -u --unit=[C|F] : force output temperature either in Celsius or "
++"Fahrenheit.\n"
+ " -q --quiet : do not check if the drive is supported.\n"
+ " -v --version : display hddtemp version number.\n"
+ " -w --wake-up : wake-up the drive if need.\n"
+@@ -153,11 +125,14 @@
+ "\n"
+ "Report bugs or new drives to <hddtemp at guzu.net>.\n"
+ msgstr ""
+-" Utilisation: hddtemp [OPTIONS] DISQUE1 [DISQUE2]...\n"
++" Utilisation: hddtemp [OPTIONS] [TYPE:]DISQUE1 [[TYPE:]DISQUE2]...\n"
+ "\n"
+ " hddtemp affiche la température des lecteurs passés en argument.\n"
+ " Les lecteurs doivent avoir le support S.M.A.R.T.\n"
+ "\n"
++" TYPE peut être SATA, PATA ou SCSI. Si le type est omis, hddtemp essaiera\n"
++" de le deviner.\n"
++"\n"
+ " -b --drivebase : affiche le contenu du fichier de base de donnée "
+ "qui \n"
+ " permet à hddtemp de reconnaître les lecteurs "
+@@ -172,6 +147,7 @@
+ "défaut).\n"
+ " -f --file=FILE : specifie le fichier à utiliser comme base de "
+ "données.\n"
++" -F --foreground : ne pas démoniser, rester au premier plan.\n"
+ " -l --listen=addr : écoute sur une interface spécifique (en mode démon "
+ "TCP/IP).\n"
+ " -n --numeric : affiche seulement la température.\n"
+@@ -180,6 +156,8 @@
+ "démon TCP/IP).\n"
+ " -S --syslog=s : enregistre la température dans syslog tous les s "
+ "secondes.\n"
++" -u --unit=[C|F] : affiche la température en degrés Celsius ou "
++"Fahrenheit.\n"
+ " -q --quiet : ne vérifie pas si le lecteur est supporté.\n"
+ " -v --version : affiche la version de hddtemp.\n"
+ " -w --wake-up : réveiller le lecteur si nécessaire.\n"
+@@ -188,62 +166,95 @@
+ "\n"
+ "Report bugs or new drives to <hddtemp at guzu.net>.\n"
+
+-#: src/hddtemp.c:522
++#: src/hddtemp.c:402
+ #, c-format
+ msgid "hddtemp version %s\n"
+ msgstr "hddtemp version %s\n"
+
+-#: src/hddtemp.c:547
++#: src/hddtemp.c:418
+ #, c-format
+ msgid "ERROR: invalid interval.\n"
+ msgstr "ERREUR : intervalle invalide.\n"
+
+-#: src/hddtemp.c:547
++#: src/hddtemp.c:438
++#, c-format
+ msgid "Too few arguments: you must specify one drive, at least.\n"
+ msgstr "Trop peu d'arguments : vous devez spécifier au moins un lecteur.\n"
+
+-#: src/hddtemp.c:557
++#: src/hddtemp.c:448
++#, c-format
+ msgid "ERROR: can't use --debug and --daemon or --syslog options together.\n"
+ msgstr ""
+ "ERREUR: impossible d'utiliser les options --debug et --daemon ou --syslog en "
+ "même temps.\n"
+
+-#: src/hddtemp.c:583
++#: src/hddtemp.c:505
+ #, c-format
+ msgid "ERROR: %s: can't determine bus type (or this bus type is unknown)\n"
+ msgstr ""
+ "ERREUR: %s: impossible de déterminer le type de bus (ou ce type de bus est "
+ "inconnu)\n"
+
+-#: src/ata.c:66 src/scsi.c:68
++#: src/ata.c:66 src/scsi.c:64
+ msgid "unknown"
+ msgstr "inconnu"
+
+-#: src/ata.c:98
++#: src/ata.c:85 src/ata.c:104 src/scsi.c:91
+ #, c-format
+-msgid "field(%d)\t = %d\n"
+-msgstr "champ(%d)\t = %d\n"
+-
+-#: src/ata.c:167
+ msgid "S.M.A.R.T. not available"
+ msgstr "S.M.A.R.T. non disponible"
+
+-#: src/db.c:180
++#: src/db.c:115
++#, c-format
++msgid ""
++"\n"
++"Regexp%s| Value | Description\n"
++"------%s---------------------\n"
++msgstr ""
++"\n"
++"Regexp%s| Valeur | Description\n"
++"------%s----------------------\n"
++
++#: src/db.c:121
++#, c-format
++msgid "%s%s| %5d | %s\n"
++msgstr "%s%s| %5d | %s\n"
++
++#: src/db.c:236
+ #, c-format
+ msgid "hddtemp: can't open %1$s: %2$s\n"
+ msgstr "hddtemp: ne peut ouvrir %1$s: %2$s\n"
+
+-#: src/db.c:194
++#: src/db.c:250
+ #, c-format
+ msgid "ERROR: syntax error at line %1$d in %2$s\n"
+ msgstr "ERREUR: erreur de syntaxe à la ligne %1$d: %2$s\n"
+
+-#: src/db.c:201
++#: src/db.c:257
+ #, c-format
+ msgid " ERROR: line exceed %1$d characters in %2$s.\n"
+ msgstr " ERREUR: ligne exécdant %1$d caractères dans %2$s.\n"
+
+-#: src/scsi.c:112 src/scsi.c:130
++#: src/scsi.c:111 src/scsi.c:129
+ #, c-format
+ msgid "log sense failed : %s"
+ msgstr "echec de 'log sense' : %s "
++
++#~ msgid ""
++#~ "WARNING: Drive %s doesn't appear in the database of supported drives\n"
++#~ "WARNING: But using a common value, it reports something.\n"
++#~ "WARNING: Note that the temperature shown could be wrong.\n"
++#~ "WARNING: See --help, --debug and --drivebase options.\n"
++#~ "WARNING: And don't forget you can add your drive to hddtemp.db\n"
++#~ msgstr ""
++#~ "ATTENTION : Le lecteur %s n'apparait pas dans la base de données des "
++#~ "lecteurs supportés\n"
++#~ "ATTENTION : Mais en utilisant une valeur courante, il renvoie quelque "
++#~ "chose.\n"
++#~ "ATTENTION : Notez que la température renvoyée peut être erronée.\n"
++#~ "ATTENTION : Voir les options --help, --debug et --drivebase.\n"
++#~ "ATTENTION : Et n'oubliez pas d'ajouter votre lecteur au fichier hddtemp."
++#~ "db\n"
++
++#~ msgid "field(%d)\t = %d\n"
++#~ msgstr "champ(%d)\t = %d\n"
+--- hddtemp-0.3-beta15.orig/po/ru.po
++++ hddtemp-0.3-beta15/po/ru.po
+@@ -6,8 +6,8 @@
+ msgid ""
+ msgstr ""
+ "Project-Id-Version: hddtemp 0.3-beta3\n"
+-"Report-Msgid-Bugs-To: hddtemp at guzu.net\n"
+-"POT-Creation-Date: 2005-02-25 22:43+0100\n"
++"Report-Msgid-Bugs-To: \n"
++"POT-Creation-Date: 2006-06-29 16:24+0200\n"
+ "PO-Revision-Date: 2003-03-08 16:42+0300\n"
+ "Last-Translator: Michael Shigorin <mike at altlinux.ru>\n"
+ "Language-Team: Russian <ru at li.org>\n"
+@@ -15,23 +15,7 @@
+ "Content-Type: text/plain; charset=koi8-r\n"
+ "Content-Transfer-Encoding: 8bit\n"
+
+-#: src/hddtemp.c:112
+-#, c-format
+-msgid ""
+-"\n"
+-"Regexp%s| Value | Description\n"
+-"------%s---------------------\n"
+-msgstr ""
+-"\n"
+-"òÅÇÜËÓ%s| úÎÁÞ. | ïÐÉÓÁÎÉÅ \n"
+-"------%s---------------------\n"
+-
+-#: src/hddtemp.c:118
+-#, c-format
+-msgid "%s%s| %5d | %s\n"
+-msgstr ""
+-
+-#: src/hddtemp.c:161
++#: src/hddtemp.c:156
+ #, c-format
+ msgid ""
+ "\n"
+@@ -40,7 +24,7 @@
+ "\n"
+ msgstr ""
+
+-#: src/hddtemp.c:188
++#: src/hddtemp.c:189
+ #, c-format
+ msgid ""
+ "WARNING: Drive %s doesn't seem to have a temperature sensor.\n"
+@@ -53,72 +37,59 @@
+ "÷îéíáîéå: åÓÌÉ ×Ù ÔÏÞÎÏ ÚÎÁÅÔÅ, ÞÔÏ ÄÁÔÞÉË ÅÓÔØ, ÎÁÐÉÛÉÔÅ hddtemp at guzu.net\n"
+ "÷îéíáîéå: (ÓÍ. ÏÐÃÉÉ --help, --debug É --drivebase).\n"
+
+-#: src/hddtemp.c:192
++#: src/hddtemp.c:197
+ #, c-format
+ msgid "%s: %s: no sensor\n"
+ msgstr "%s: %s: ÎÅÔ ÄÁÔÞÉËÁ\n"
+
+-#: src/hddtemp.c:197
+-#, c-format
+-msgid ""
+-"WARNING: Drive %s doesn't appear in the database of supported drives\n"
+-"WARNING: But using a common value, it reports something.\n"
+-"WARNING: Note that the temperature shown could be wrong.\n"
+-"WARNING: See --help, --debug and --drivebase options.\n"
+-"WARNING: And don't forget you can add your drive to hddtemp.db\n"
+-msgstr ""
+-"÷îéíáîéå: äÉÓË %s ÎÅ ×ËÌÀÞÅÎ × ÂÁÚÕ ÄÁÎÎÙÈ ÐÏÄÄÅÒÖÉ×ÁÅÍÙÈ ÐÒÉ×ÏÄÏ×.\n"
+-"÷îéíáîéå: îÏ Ó ÉÓÐÏÌØÚÏ×ÁÎÉÅÍ ÒÁÓÐÒÏÓÔÒÁÎÅÎÎÙÈ ÐÁÒÁÍÅÔÒÏ× ÏÎ ÞÔÏ-ÔÏ ×ÙÄÁÅÔ.\n"
+-"÷îéíáîéå: úÁÍÅÔØÔÅ, ÞÔÏ ÐÏËÁÚÁÎÎÁÑ ÔÅÍÐÅÒÁÔÕÒÁ ÍÏÖÅÔ ÔÁËÏ×ÏÊ ÎÅ Ñ×ÌÑÔØÓÑ.\n"
+-"÷îéíáîéå: óÍ. ÏÐÃÉÉ --help, --debug É --drivebase.\n"
+-"÷îéíáîéå: é ÎÅ ÚÁÂÕÄØÔÅ, ÞÔÏ ÍÏÖÎÏ ÄÏÂÁ×ÉÔØ ÐÒÉ×ÏÄ × hddtemp.db\n"
+-
+-#: src/hddtemp.c:202
++#: src/hddtemp.c:211
+ #, c-format
+ msgid "%s: %s: %d%sC or %sF\n"
+ msgstr "%s: %s: %d%sC ÉÌÉ %sF\n"
+
+-#: src/hddtemp.c:214
++#: src/hddtemp.c:235
+ #, c-format
+ msgid "%s: %s: drive is sleeping\n"
+ msgstr "%s: %s: ÎÅÔ ÄÁÔÞÉËÁ\n"
+
+-#: src/hddtemp.c:217
+-#, c-format
+-msgid "%s: %s: known drive, but it doesn't have a temperature sensor.\n"
++#: src/hddtemp.c:242
++#, fuzzy, c-format
++msgid "%s: %s: drive supported, but it doesn't have a temperature sensor.\n"
+ msgstr "%s: %s: ÉÚ×ÅÓÔÎÙÊ ÄÉÓË, ÎÅ ÓÏÄÅÒÖÁÝÉÊ ÄÁÔÞÉËÁ ÔÅÍÐÅÒÁÔÕÒÙ.\n"
+
+-#: src/hddtemp.c:220
++#: src/hddtemp.c:246
+ #, c-format
+ msgid "ERROR: %s: %s: unknown returned status\n"
+ msgstr "ïûéâëá: %s: %s: ÎÅÉÚ×ÅÓÔÎÙÊ ÓÔÁÔÕÓ ×ÏÚ×ÒÁÔÁ\n"
+
+-#: src/hddtemp.c:235
++#: src/hddtemp.c:261
+ #, c-format
+ msgid ""
+ "\n"
+ "If one of the field value seems to match the temperature, be sure to read\n"
+-"the hddtemp man page before sending me a report (section REPORT). Thanks.\n"
++"the hddtemp man page before sending a report (section REPORT). Thanks.\n"
+ msgstr ""
+
+-#: src/hddtemp.c:308
++#: src/hddtemp.c:338
+ #, c-format
+ msgid "ERROR: invalid separator.\n"
+ msgstr "ïûéâëá: ÎÅ×ÅÒÎÙÊ ÒÁÚÄÅÌÉÔÅÌØ.\n"
+
+-#: src/hddtemp.c:319
++#: src/hddtemp.c:349
+ #, c-format
+ msgid "ERROR: invalid port number.\n"
+ msgstr "ïýéâëá: ÎÅ×ÅÒÎÙÊ ÎÏÍÅÒ ÐÏÒÔÁ.\n"
+
+-#: src/hddtemp.c:329
++#: src/hddtemp.c:371
+ #, fuzzy, c-format
+ msgid ""
+-" Usage: hddtemp [OPTIONS] DISK1 [DISK2]...\n"
++" Usage: hddtemp [OPTIONS] [TYPE:]DISK1 [[TYPE:]DISK2]...\n"
+ "\n"
+ " hddtemp displays the temperature of drives supplied in argument.\n"
+ " Drives must support S.M.A.R.T.\n"
+ "\n"
++" TYPE could be SATA, PATA or SCSI. If omitted hddtemp will try to guess.\n"
++"\n"
+ " -b --drivebase : display database file content that allow hddtemp to\n"
+ " recognize supported drives.\n"
+ " -D --debug : display various S.M.A.R.T. fields and their values.\n"
+@@ -128,6 +99,7 @@
+ " -d --daemon : run hddtemp in TCP/IP daemon mode (port %d by "
+ "default.)\n"
+ " -f --file=FILE : specify database file to use.\n"
++" -F --foreground : don't daemonize, stay in foreground.\n"
+ " -l --listen=addr : listen on a specific interface (in TCP/IP daemon "
+ "mode).\n"
+ " -n --numeric : print only the temperature.\n"
+@@ -135,6 +107,8 @@
+ " -s --separator=C : separator to use between fields (in TCP/IP daemon "
+ "mode).\n"
+ " -S --syslog=s : log temperature to syslog every s seconds.\n"
++" -u --unit=[C|F] : force output temperature either in Celsius or "
++"Fahrenheit.\n"
+ " -q --quiet : do not check if the drive is supported.\n"
+ " -v --version : display hddtemp version number.\n"
+ " -w --wake-up : wake-up the drive if need.\n"
+@@ -168,59 +142,90 @@
+ "\n"
+ "óÏÏÂÝÅÎÉÑ Ï ÏÛÉÂËÁÈ É ÄÁÎÎÙÅ ÄÌÑ ÄÉÓËÏ× ÏÔÐÒÁ×ÌÑÊÔÅ ÎÁ <hddtemp at guzu.net>.\n"
+
+-#: src/hddtemp.c:522
++#: src/hddtemp.c:402
+ #, c-format
+ msgid "hddtemp version %s\n"
+ msgstr "÷ÅÒÓÉÑ hddtemp: %s\n"
+
+-#: src/hddtemp.c:547
++#: src/hddtemp.c:418
+ #, fuzzy, c-format
+ msgid "ERROR: invalid interval.\n"
+ msgstr "ïûéâëá: ÎÅ×ÅÒÎÙÊ ÒÁÚÄÅÌÉÔÅÌØ.\n"
+
+-#: src/hddtemp.c:547
++#: src/hddtemp.c:438
++#, c-format
+ msgid "Too few arguments: you must specify one drive, at least.\n"
+ msgstr ""
+
+-#: src/hddtemp.c:557
+-#, fuzzy
++#: src/hddtemp.c:448
++#, fuzzy, c-format
+ msgid "ERROR: can't use --debug and --daemon or --syslog options together.\n"
+ msgstr "ïûéâëá: ÏÄÎÏ×ÒÅÍÅÎÎÏÅ ÉÓÐÏÌØÚÏ×ÁÎÉÅ --debug É --daemon ÎÅÄÏÐÕÓÔÉÍÏ.\n"
+
+-#: src/hddtemp.c:583
++#: src/hddtemp.c:505
+ #, c-format
+ msgid "ERROR: %s: can't determine bus type (or this bus type is unknown)\n"
+ msgstr "ïûéâëá: %s: ÎÅ×ÏÚÍÏÖÎÏ ÏÐÒÅÄÅÌÉÔØ ÔÉÐ ÛÉÎÙ\n"
+
+-#: src/ata.c:66 src/scsi.c:68
++#: src/ata.c:66 src/scsi.c:64
+ msgid "unknown"
+ msgstr "ÎÅÉÚ×."
+
+-#: src/ata.c:98
++#: src/ata.c:85 src/ata.c:104 src/scsi.c:91
+ #, c-format
+-msgid "field(%d)\t = %d\n"
+-msgstr "ÐÏÌÅ(%d)\t = %d\n"
+-
+-#: src/ata.c:167
+ msgid "S.M.A.R.T. not available"
+ msgstr "S.M.A.R.T. ÎÅÄÏÓÔÕÐÅÎ"
+
+-#: src/db.c:180
++#: src/db.c:115
++#, c-format
++msgid ""
++"\n"
++"Regexp%s| Value | Description\n"
++"------%s---------------------\n"
++msgstr ""
++"\n"
++"òÅÇÜËÓ%s| úÎÁÞ. | ïÐÉÓÁÎÉÅ \n"
++"------%s---------------------\n"
++
++#: src/db.c:121
++#, c-format
++msgid "%s%s| %5d | %s\n"
++msgstr ""
++
++#: src/db.c:236
+ #, c-format
+ msgid "hddtemp: can't open %1$s: %2$s\n"
+ msgstr "hddtemp: ÎÅ ÍÏÇÕ ÏÔËÒÙÔØ %1$s: %2$s\n"
+
+-#: src/db.c:194
++#: src/db.c:250
+ #, c-format
+ msgid "ERROR: syntax error at line %1$d in %2$s\n"
+ msgstr "óÉÎÔÁËÓÉÞÅÓËÁÑ ïûéâëá × ÓÔÒÏËÅ %1$d ÆÁÊÌÁ %2$s\n"
+
+-#: src/db.c:201
++#: src/db.c:257
+ #, c-format
+ msgid " ERROR: line exceed %1$d characters in %2$s.\n"
+ msgstr "ïûéâëá: ÓÔÒÏËÁ ÄÌÉÎÎÅÅ %1$d ÓÉÍ×ÏÌÏ× × %2$s.\n"
+
+-#: src/scsi.c:112 src/scsi.c:130
++#: src/scsi.c:111 src/scsi.c:129
+ #, c-format
+ msgid "log sense failed : %s"
+ msgstr ""
++
++#~ msgid ""
++#~ "WARNING: Drive %s doesn't appear in the database of supported drives\n"
++#~ "WARNING: But using a common value, it reports something.\n"
++#~ "WARNING: Note that the temperature shown could be wrong.\n"
++#~ "WARNING: See --help, --debug and --drivebase options.\n"
++#~ "WARNING: And don't forget you can add your drive to hddtemp.db\n"
++#~ msgstr ""
++#~ "÷îéíáîéå: äÉÓË %s ÎÅ ×ËÌÀÞÅÎ × ÂÁÚÕ ÄÁÎÎÙÈ ÐÏÄÄÅÒÖÉ×ÁÅÍÙÈ ÐÒÉ×ÏÄÏ×.\n"
++#~ "÷îéíáîéå: îÏ Ó ÉÓÐÏÌØÚÏ×ÁÎÉÅÍ ÒÁÓÐÒÏÓÔÒÁÎÅÎÎÙÈ ÐÁÒÁÍÅÔÒÏ× ÏÎ ÞÔÏ-ÔÏ "
++#~ "×ÙÄÁÅÔ.\n"
++#~ "÷îéíáîéå: úÁÍÅÔØÔÅ, ÞÔÏ ÐÏËÁÚÁÎÎÁÑ ÔÅÍÐÅÒÁÔÕÒÁ ÍÏÖÅÔ ÔÁËÏ×ÏÊ ÎÅ "
++#~ "Ñ×ÌÑÔØÓÑ.\n"
++#~ "÷îéíáîéå: óÍ. ÏÐÃÉÉ --help, --debug É --drivebase.\n"
++#~ "÷îéíáîéå: é ÎÅ ÚÁÂÕÄØÔÅ, ÞÔÏ ÍÏÖÎÏ ÄÏÂÁ×ÉÔØ ÐÒÉ×ÏÄ × hddtemp.db\n"
++
++#~ msgid "field(%d)\t = %d\n"
++#~ msgstr "ÐÏÌÅ(%d)\t = %d\n"
+--- hddtemp-0.3-beta15.orig/po/sv.po
++++ hddtemp-0.3-beta15/po/sv.po
+@@ -6,8 +6,8 @@
+ msgid ""
+ msgstr ""
+ "Project-Id-Version: hddtemp 0.3-beta14-4\n"
+-"Report-Msgid-Bugs-To: hddtemp at guzu.net\n"
+-"POT-Creation-Date: 2005-02-25 22:43+0100\n"
++"Report-Msgid-Bugs-To: \n"
++"POT-Creation-Date: 2006-06-29 16:24+0200\n"
+ "PO-Revision-Date: 2005-11-02 19:03+0100\n"
+ "Last-Translator: Daniel Nylander <po at danielnylander.se>\n"
+ "Language-Team: Swedish <sv at li.org>\n"
+@@ -17,23 +17,7 @@
+ "X-Poedit-Language: swe\n"
+ "X-Poedit-Country: swe\n"
+
+-#: src/hddtemp.c:112
+-#, c-format
+-msgid ""
+-"\n"
+-"Regexp%s| Value | Description\n"
+-"------%s---------------------\n"
+-msgstr ""
+-"\n"
+-"Regexp%s| Värde | Beskrivning\n"
+-"------%s---------------------\n"
+-
+-#: src/hddtemp.c:118
+-#, c-format
+-msgid "%s%s| %5d | %s\n"
+-msgstr "%s%s| %5d | %s\n"
+-
+-#: src/hddtemp.c:161
++#: src/hddtemp.c:156
+ #, c-format
+ msgid ""
+ "\n"
+@@ -46,7 +30,7 @@
+ "Modell: %s\n"
+ "\n"
+
+-#: src/hddtemp.c:188
++#: src/hddtemp.c:189
+ #, c-format
+ msgid ""
+ "WARNING: Drive %s doesn't seem to have a temperature sensor.\n"
+@@ -60,76 +44,63 @@
+ "net).\n"
+ "VARNING: Se --help, --debug och --drivebase flaggorna.\n"
+
+-#: src/hddtemp.c:192
++#: src/hddtemp.c:197
+ #, c-format
+ msgid "%s: %s: no sensor\n"
+ msgstr "%s: %s: ingen sensor\n"
+
+-#: src/hddtemp.c:197
+-#, c-format
+-msgid ""
+-"WARNING: Drive %s doesn't appear in the database of supported drives\n"
+-"WARNING: But using a common value, it reports something.\n"
+-"WARNING: Note that the temperature shown could be wrong.\n"
+-"WARNING: See --help, --debug and --drivebase options.\n"
+-"WARNING: And don't forget you can add your drive to hddtemp.db\n"
+-msgstr ""
+-"VARNING: Disken %s verkar inte finnas i databasen över diskar som stöds\n"
+-"VARNING: Men använder man ett vanligt värde rapporterar den något.\n"
+-"VARNING: Notera att temperaturen som visas kan vara felaktig.\n"
+-"VARNING: Se --help, --debug och --drivebase flaggorna.\n"
+-"VARNING: Och glöm inte att du kan lägga till din disk till hddtemp.db\n"
+-
+-#: src/hddtemp.c:202
++#: src/hddtemp.c:211
+ #, c-format
+ msgid "%s: %s: %d%sC or %sF\n"
+ msgstr "%s: %s: %d%sC eller %sF\n"
+
+-#: src/hddtemp.c:214
++#: src/hddtemp.c:235
+ #, c-format
+ msgid "%s: %s: drive is sleeping\n"
+ msgstr "%s: %s: disken sover\n"
+
+-#: src/hddtemp.c:217
+-#, c-format
+-msgid "%s: %s: known drive, but it doesn't have a temperature sensor.\n"
++#: src/hddtemp.c:242
++#, fuzzy, c-format
++msgid "%s: %s: drive supported, but it doesn't have a temperature sensor.\n"
+ msgstr "%s: %s: känd disk men den har ingen temperatursensor.\n"
+
+-#: src/hddtemp.c:220
++#: src/hddtemp.c:246
+ #, c-format
+ msgid "ERROR: %s: %s: unknown returned status\n"
+ msgstr "FEL: %s: %s: okänd returnerad status\n"
+
+-#: src/hddtemp.c:235
+-#, c-format
++#: src/hddtemp.c:261
++#, fuzzy, c-format
+ msgid ""
+ "\n"
+ "If one of the field value seems to match the temperature, be sure to read\n"
+-"the hddtemp man page before sending me a report (section REPORT). Thanks.\n"
++"the hddtemp man page before sending a report (section REPORT). Thanks.\n"
+ msgstr ""
+ "\n"
+ "Om ett av fältvärdena verkar matcha temperaturen, var säker på att du\n"
+ "läst manualsidan för hddtemp före du skickar en rapport till mig (sektionen\n"
+ "REPORT). Tack.\n"
+
+-#: src/hddtemp.c:308
++#: src/hddtemp.c:338
+ #, c-format
+ msgid "ERROR: invalid separator.\n"
+ msgstr "FEL: ogiltig separator.\n"
+
+-#: src/hddtemp.c:319
++#: src/hddtemp.c:349
+ #, c-format
+ msgid "ERROR: invalid port number.\n"
+ msgstr "FEL: ogiltigt portnummer.\n"
+
+-#: src/hddtemp.c:329
+-#, c-format
++#: src/hddtemp.c:371
++#, fuzzy, c-format
+ msgid ""
+-" Usage: hddtemp [OPTIONS] DISK1 [DISK2]...\n"
++" Usage: hddtemp [OPTIONS] [TYPE:]DISK1 [[TYPE:]DISK2]...\n"
+ "\n"
+ " hddtemp displays the temperature of drives supplied in argument.\n"
+ " Drives must support S.M.A.R.T.\n"
+ "\n"
++" TYPE could be SATA, PATA or SCSI. If omitted hddtemp will try to guess.\n"
++"\n"
+ " -b --drivebase : display database file content that allow hddtemp to\n"
+ " recognize supported drives.\n"
+ " -D --debug : display various S.M.A.R.T. fields and their values.\n"
+@@ -139,6 +110,7 @@
+ " -d --daemon : run hddtemp in TCP/IP daemon mode (port %d by "
+ "default.)\n"
+ " -f --file=FILE : specify database file to use.\n"
++" -F --foreground : don't daemonize, stay in foreground.\n"
+ " -l --listen=addr : listen on a specific interface (in TCP/IP daemon "
+ "mode).\n"
+ " -n --numeric : print only the temperature.\n"
+@@ -146,6 +118,8 @@
+ " -s --separator=C : separator to use between fields (in TCP/IP daemon "
+ "mode).\n"
+ " -S --syslog=s : log temperature to syslog every s seconds.\n"
++" -u --unit=[C|F] : force output temperature either in Celsius or "
++"Fahrenheit.\n"
+ " -q --quiet : do not check if the drive is supported.\n"
+ " -v --version : display hddtemp version number.\n"
+ " -w --wake-up : wake-up the drive if need.\n"
+@@ -184,61 +158,91 @@
+ "\n"
+ "Rapportera buggar eller nya hårddiskar till <hddtemp at guzu.net>.\n"
+
+-#: src/hddtemp.c:522
++#: src/hddtemp.c:402
+ #, c-format
+ msgid "hddtemp version %s\n"
+ msgstr "hddtemp version %s\n"
+
+-#: src/hddtemp.c:547
++#: src/hddtemp.c:418
+ #, c-format
+ msgid "ERROR: invalid interval.\n"
+ msgstr "FEL: ogiltigt intervall.\n"
+
+-#: src/hddtemp.c:547
++#: src/hddtemp.c:438
++#, c-format
+ msgid "Too few arguments: you must specify one drive, at least.\n"
+ msgstr "För få argument: du måste specificera åtminstone en disk.\n"
+
+-#: src/hddtemp.c:557
++#: src/hddtemp.c:448
++#, c-format
+ msgid "ERROR: can't use --debug and --daemon or --syslog options together.\n"
+ msgstr ""
+ "FEL: kan inte använda --debug och --daemon eller --syslog flaggorna "
+ "tillsammans.\n"
+
+-#: src/hddtemp.c:583
++#: src/hddtemp.c:505
+ #, c-format
+ msgid "ERROR: %s: can't determine bus type (or this bus type is unknown)\n"
+ msgstr ""
+ "FEL: %s: kan inte fastställa busstyp (eller så är denna busstyp okänd)\n"
+
+-#: src/ata.c:66 src/scsi.c:68
++#: src/ata.c:66 src/scsi.c:64
+ msgid "unknown"
+ msgstr "okänd"
+
+-#: src/ata.c:98
++#: src/ata.c:85 src/ata.c:104 src/scsi.c:91
+ #, c-format
+-msgid "field(%d)\t = %d\n"
+-msgstr "fält(%d)\t = %d\n"
+-
+-#: src/ata.c:167
+ msgid "S.M.A.R.T. not available"
+ msgstr "S.M.A.R.T. är inte tillgänglig"
+
+-#: src/db.c:180
++#: src/db.c:115
++#, c-format
++msgid ""
++"\n"
++"Regexp%s| Value | Description\n"
++"------%s---------------------\n"
++msgstr ""
++"\n"
++"Regexp%s| Värde | Beskrivning\n"
++"------%s---------------------\n"
++
++#: src/db.c:121
++#, c-format
++msgid "%s%s| %5d | %s\n"
++msgstr "%s%s| %5d | %s\n"
++
++#: src/db.c:236
+ #, c-format
+ msgid "hddtemp: can't open %1$s: %2$s\n"
+ msgstr "hddtemp: kan inte öppna %1$s: %2$s\n"
+
+-#: src/db.c:194
++#: src/db.c:250
+ #, c-format
+ msgid "ERROR: syntax error at line %1$d in %2$s\n"
+ msgstr "FEL: syntaxfel på rad %1$d i %2$s\n"
+
+-#: src/db.c:201
++#: src/db.c:257
+ #, c-format
+ msgid " ERROR: line exceed %1$d characters in %2$s.\n"
+ msgstr " FEL: raden överstiger %1$d tecken i %2$s.\n"
+
+-#: src/scsi.c:112 src/scsi.c:130
++#: src/scsi.c:111 src/scsi.c:129
+ #, c-format
+ msgid "log sense failed : %s"
+ msgstr "igenkänning av logg misslyckades : %s"
++
++#~ msgid ""
++#~ "WARNING: Drive %s doesn't appear in the database of supported drives\n"
++#~ "WARNING: But using a common value, it reports something.\n"
++#~ "WARNING: Note that the temperature shown could be wrong.\n"
++#~ "WARNING: See --help, --debug and --drivebase options.\n"
++#~ "WARNING: And don't forget you can add your drive to hddtemp.db\n"
++#~ msgstr ""
++#~ "VARNING: Disken %s verkar inte finnas i databasen över diskar som stöds\n"
++#~ "VARNING: Men använder man ett vanligt värde rapporterar den något.\n"
++#~ "VARNING: Notera att temperaturen som visas kan vara felaktig.\n"
++#~ "VARNING: Se --help, --debug och --drivebase flaggorna.\n"
++#~ "VARNING: Och glöm inte att du kan lägga till din disk till hddtemp.db\n"
++
++#~ msgid "field(%d)\t = %d\n"
++#~ msgstr "fält(%d)\t = %d\n"
+--- hddtemp-0.3-beta15.orig/po/pt.po
++++ hddtemp-0.3-beta15/po/pt.po
+@@ -7,7 +7,7 @@
+ msgstr ""
+ "Project-Id-Version: hddtemp 0.3-beta14\n"
+ "Report-Msgid-Bugs-To: \n"
+-"POT-Creation-Date: 2005-02-25 22:43+0100\n"
++"POT-Creation-Date: 2006-06-29 16:24+0200\n"
+ "PO-Revision-Date: 2006-03-29 23:22+0000\n"
+ "Last-Translator: Miguel Figueiredo <elmig at debianp.org>\n"
+ "Language-Team: Portuguese <traduz at debianpt.org>\n"
+@@ -15,23 +15,7 @@
+ "Content-Type: text/plain; charset=UTF-8\n"
+ "Content-Transfer-Encoding: 8bit\n"
+
+-#: src/hddtemp.c:112
+-#, c-format
+-msgid ""
+-"\n"
+-"Regexp%s| Value | Description\n"
+-"------%s---------------------\n"
+-msgstr ""
+-"\n"
+-"Regexp%s| Valor | Descrição\n"
+-"------%s-------------------\n"
+-
+-#: src/hddtemp.c:118
+-#, c-format
+-msgid "%s%s| %5d | %s\n"
+-msgstr "%s%s| %5d | %s\n"
+-
+-#: src/hddtemp.c:161
++#: src/hddtemp.c:156
+ #, c-format
+ msgid ""
+ "\n"
+@@ -44,7 +28,7 @@
+ "Modelo: %s\n"
+ "\n"
+
+-#: src/hddtemp.c:188
++#: src/hddtemp.c:189
+ #, c-format
+ msgid ""
+ "WARNING: Drive %s doesn't seem to have a temperature sensor.\n"
+@@ -54,79 +38,68 @@
+ msgstr ""
+ "AVISO: O disco %s não parece ter um sensor de temperatura.\n"
+ "AVISO: Isto não significa que não tem nenhum.\n"
+-"AVISO: Se tem a certeza que tem um, por favor contacte-me (hddtemp at guzu.net).\n"
++"AVISO: Se tem a certeza que tem um, por favor contacte-me (hddtemp at guzu."
++"net).\n"
+ "AVISO: Veja as opções --help, --debug e --drivebase.\n"
+
+-#: src/hddtemp.c:192
++#: src/hddtemp.c:197
+ #, c-format
+ msgid "%s: %s: no sensor\n"
+ msgstr "%s: %s: sem sensor\n"
+
+-#: src/hddtemp.c:197
+-#, c-format
+-msgid ""
+-"WARNING: Drive %s doesn't appear in the database of supported drives\n"
+-"WARNING: But using a common value, it reports something.\n"
+-"WARNING: Note that the temperature shown could be wrong.\n"
+-"WARNING: See --help, --debug and --drivebase options.\n"
+-"WARNING: And don't forget you can add your drive to hddtemp.db\n"
+-msgstr ""
+-"AVISO: O disco %s não parece estar na base de dados de discos suportados\n"
+-"AVISO: Mas ao utilizar um valor usual, relata alguma coisa.\n"
+-"AVISO: Note que a temperatura mostrada pode estar errada.\n"
+-"AVISO: Veja as opções --help, --debug e --frivebase.\n"
+-"AVISO: E não se esqueça de adicionar o seu disco a hddtemp.db\n"
+-
+-#: src/hddtemp.c:202
++#: src/hddtemp.c:211
+ #, c-format
+ msgid "%s: %s: %d%sC or %sF\n"
+ msgstr "%s: %s: %d%sC ou %sF\n"
+
+-#: src/hddtemp.c:214
++#: src/hddtemp.c:235
+ #, c-format
+ msgid "%s: %s: drive is sleeping\n"
+ msgstr "%s: %s: o disco está adormecido\n"
+
+-#: src/hddtemp.c:217
+-#, c-format
+-msgid "%s: %s: known drive, but it doesn't have a temperature sensor.\n"
++#: src/hddtemp.c:242
++#, fuzzy, c-format
++msgid "%s: %s: drive supported, but it doesn't have a temperature sensor.\n"
+ msgstr "%s: %s: disco conhecido, mas não tem um sensor de temperatura.\n"
+
+-#: src/hddtemp.c:220
++#: src/hddtemp.c:246
+ #, c-format
+ msgid "ERROR: %s: %s: unknown returned status\n"
+ msgstr "ERRO: %s: %s: estado devolvido desconhecido\n"
+
+-#: src/hddtemp.c:235
+-#, c-format
++#: src/hddtemp.c:261
++#, fuzzy, c-format
+ msgid ""
+ "\n"
+ "If one of the field value seems to match the temperature, be sure to read\n"
+-"the hddtemp man page before sending me a report (section REPORT). Thanks.\n"
++"the hddtemp man page before sending a report (section REPORT). Thanks.\n"
+ msgstr ""
+ "\n"
+-"Se um dos campos de valores parecer coincidir com a temperatura, assegure-se\n"
++"Se um dos campos de valores parecer coincidir com a temperatura, assegure-"
++"se\n"
+ "que lê a página do manual hddtemp antes de me enviar um relatório (secção\n"
+ "REPORT). Obrigado.\n"
+
+-#: src/hddtemp.c:308
++#: src/hddtemp.c:338
+ #, c-format
+ msgid "ERROR: invalid separator.\n"
+ msgstr "ERRO: separador inválido.\n"
+
+-#: src/hddtemp.c:319
++#: src/hddtemp.c:349
+ #, c-format
+ msgid "ERROR: invalid port number.\n"
+ msgstr "ERRO: número de port inválido\n"
+
+-#: src/hddtemp.c:329
+-#, c-format
++#: src/hddtemp.c:371
++#, fuzzy, c-format
+ msgid ""
+-" Usage: hddtemp [OPTIONS] DISK1 [DISK2]...\n"
++" Usage: hddtemp [OPTIONS] [TYPE:]DISK1 [[TYPE:]DISK2]...\n"
+ "\n"
+ " hddtemp displays the temperature of drives supplied in argument.\n"
+ " Drives must support S.M.A.R.T.\n"
+ "\n"
++" TYPE could be SATA, PATA or SCSI. If omitted hddtemp will try to guess.\n"
++"\n"
+ " -b --drivebase : display database file content that allow hddtemp to\n"
+ " recognize supported drives.\n"
+ " -D --debug : display various S.M.A.R.T. fields and their values.\n"
+@@ -136,6 +109,7 @@
+ " -d --daemon : run hddtemp in TCP/IP daemon mode (port %d by "
+ "default.)\n"
+ " -f --file=FILE : specify database file to use.\n"
++" -F --foreground : don't daemonize, stay in foreground.\n"
+ " -l --listen=addr : listen on a specific interface (in TCP/IP daemon "
+ "mode).\n"
+ " -n --numeric : print only the temperature.\n"
+@@ -143,6 +117,8 @@
+ " -s --separator=C : separator to use between fields (in TCP/IP daemon "
+ "mode).\n"
+ " -S --syslog=s : log temperature to syslog every s seconds.\n"
++" -u --unit=[C|F] : force output temperature either in Celsius or "
++"Fahrenheit.\n"
+ " -q --quiet : do not check if the drive is supported.\n"
+ " -v --version : display hddtemp version number.\n"
+ " -w --wake-up : wake-up the drive if need.\n"
+@@ -156,19 +132,23 @@
+ " hddtemp mostra a temperatura dos discos indicados no argumento.\n"
+ " Os discos têm de suportar S.M.A.R.T.\n"
+ "\n"
+-" -b --drivebase : mostrar o conteúdo do ficheiro de base de dados que\n"
++" -b\t --drivebase : mostrar o conteúdo do ficheiro de base de dados que\n"
+ " permite ao hddtemp reconhecer os discos suportados.\n"
+-" -D --debug : mostrar vários campos S.M.A.R.T. e os seus valores.\n"
+-" Útil para encontrar um valor que pareça coincidir com "
+-" a temperatura e/ou para me enviar um relatório.\n"
++" -D\t --debug : mostrar vários campos S.M.A.R.T. e os seus valores.\n"
++" Útil para encontrar um valor que pareça coincidir "
++"com a temperatura e/ou para me enviar um relatório.\n"
+ " (feito para cada disco indicado).\n"
+-" -d --daemon : correr o hddtemp no modo daemon TCP/IP\n (porto %d por omissão.)\n"
++" -d --daemon : correr o hddtemp no modo daemon TCP/IP\n"
++" (porto %d por omissão.)\n"
+ " -f --file=FILE : especificar o ficheiro de base de dados a utilizar.\n"
+-" -l --listen=addr : escutar um interface especÃfico (no modo daemon TCP/IP).\n"
++" -l --listen=addr : escutar um interface especÃfico (no modo daemon TCP/"
++"IP).\n"
+ " -n --numeric : escrever apenas a temperatura.\n"
+ " -p --port=# : port para escutar (no modo daemon TCP/IP).\n"
+-" -s --separator=C : separador a utilizar entre campos (no modo daemon TCP/IP).\n"
+-" -S --syslog=s : registar a temperatura para o syslog a cada s segundos.\n"
++" -s --separator=C : separador a utilizar entre campos (no modo daemon "
++"TCP/IP).\n"
++" -S --syslog=s : registar a temperatura para o syslog a cada s "
++"segundos.\n"
+ " -q --quiet : não verificar se o disco é suportado.\n"
+ " -v --version : mostrar o número da versão do hddtemp.\n"
+ " -w --wake-up : acordar o disco se necessário.\n"
+@@ -177,58 +157,93 @@
+ "\n"
+ "Relatar bugs ou novos discos para <hddtemp at guzu.net>.\n"
+
+-#: src/hddtemp.c:522
++#: src/hddtemp.c:402
+ #, c-format
+ msgid "hddtemp version %s\n"
+ msgstr "hddtemp versão %s\n"
+
+-#: src/hddtemp.c:547
++#: src/hddtemp.c:418
+ #, c-format
+ msgid "ERROR: invalid interval.\n"
+ msgstr "ERRO: intervalo inválido.\n"
+
+-#: src/hddtemp.c:547
++#: src/hddtemp.c:438
++#, c-format
+ msgid "Too few arguments: you must specify one drive, at least.\n"
+-msgstr "Número de argumentos insuficiente: tem de especificar pelo menos um disco.\n"
++msgstr ""
++"Número de argumentos insuficiente: tem de especificar pelo menos um disco.\n"
+
+-#: src/hddtemp.c:557
++#: src/hddtemp.c:448
++#, c-format
+ msgid "ERROR: can't use --debug and --daemon or --syslog options together.\n"
+-msgstr "ERRO: não pode utilizar em conjunto as opções --debug e --daemon ou --syslog.\n"
++msgstr ""
++"ERRO: não pode utilizar em conjunto as opções --debug e --daemon ou --"
++"syslog.\n"
+
+-#: src/hddtemp.c:583
++#: src/hddtemp.c:505
+ #, c-format
+ msgid "ERROR: %s: can't determine bus type (or this bus type is unknown)\n"
+-msgstr "ERRO: %s: não é possÃvel determinar o tipo do bus (ou este tipo de bus é desconhecido)\n"
++msgstr ""
++"ERRO: %s: não é possÃvel determinar o tipo do bus (ou este tipo de bus é "
++"desconhecido)\n"
+
+-#: src/ata.c:66 src/scsi.c:68
++#: src/ata.c:66 src/scsi.c:64
+ msgid "unknown"
+ msgstr "desconhecido"
+
+-#: src/ata.c:98
++#: src/ata.c:85 src/ata.c:104 src/scsi.c:91
+ #, c-format
+-msgid "field(%d)\t = %d\n"
+-msgstr "campo(%d)\t = %d\n"
+-
+-#: src/ata.c:167
+ msgid "S.M.A.R.T. not available"
+ msgstr "S.M.A.R.T. não está disponÃvel"
+
+-#: src/db.c:180
++#: src/db.c:115
++#, c-format
++msgid ""
++"\n"
++"Regexp%s| Value | Description\n"
++"------%s---------------------\n"
++msgstr ""
++"\n"
++"Regexp%s| Valor | Descrição\n"
++"------%s-------------------\n"
++
++#: src/db.c:121
++#, c-format
++msgid "%s%s| %5d | %s\n"
++msgstr "%s%s| %5d | %s\n"
++
++#: src/db.c:236
+ #, c-format
+ msgid "hddtemp: can't open %1$s: %2$s\n"
+ msgstr "hddtemp: não pode abrir %1$s: %2$s\n"
+
+-#: src/db.c:194
++#: src/db.c:250
+ #, c-format
+ msgid "ERROR: syntax error at line %1$d in %2$s\n"
+ msgstr "ERRO: erro de sintaxe na linha %1$d em %2$s\n"
+
+-#: src/db.c:201
++#: src/db.c:257
+ #, c-format
+ msgid " ERROR: line exceed %1$d characters in %2$s.\n"
+ msgstr " ERRO: a linha execedeu %1$d caracteres em %2$s.\n"
+
+-#: src/scsi.c:112 src/scsi.c:130
++#: src/scsi.c:111 src/scsi.c:129
+ #, c-format
+ msgid "log sense failed : %s"
+ msgstr "detecção de log falhou: %s"
++
++#~ msgid ""
++#~ "WARNING: Drive %s doesn't appear in the database of supported drives\n"
++#~ "WARNING: But using a common value, it reports something.\n"
++#~ "WARNING: Note that the temperature shown could be wrong.\n"
++#~ "WARNING: See --help, --debug and --drivebase options.\n"
++#~ "WARNING: And don't forget you can add your drive to hddtemp.db\n"
++#~ msgstr ""
++#~ "AVISO: O disco %s não parece estar na base de dados de discos suportados\n"
++#~ "AVISO: Mas ao utilizar um valor usual, relata alguma coisa.\n"
++#~ "AVISO: Note que a temperatura mostrada pode estar errada.\n"
++#~ "AVISO: Veja as opções --help, --debug e --frivebase.\n"
++#~ "AVISO: E não se esqueça de adicionar o seu disco a hddtemp.db\n"
++
++#~ msgid "field(%d)\t = %d\n"
++#~ msgstr "campo(%d)\t = %d\n"
+--- hddtemp-0.3-beta15.orig/po/de.po
++++ hddtemp-0.3-beta15/po/de.po
+@@ -0,0 +1,250 @@
++# German translation of hddtemp.
++# Copyright (C) 2008 Free Software Foundation, Inc.
++# This file is distributed under the same license as the hddtemp package.
++# Vinzenz Vietzke <vinz at v1nz.org>, 2008.
++# ,
++#
++#
++msgid ""
++msgstr ""
++"Project-Id-Version: hddtemp 0.3-beta15-44\n"
++"Report-Msgid-Bugs-To: hddtemp at packages.debian.org\n"
++"POT-Creation-Date: 2006-06-29 16:24+0200\n"
++"PO-Revision-Date: 2011-08-30 16:40+0200\n"
++"Last-Translator: Vinzenz Vietzke <vinz at v1nz.org>\n"
++"Language-Team: <debian-l10n-german at lists.debian.org>\n"
++"MIME-Version: 1.0\n"
++"Content-Type: text/plain; charset=UTF-8\n"
++"Content-Transfer-Encoding: 8bit"
++
++#: src/hddtemp.c:156
++#, c-format
++msgid ""
++"\n"
++"================= hddtemp %s ==================\n"
++"Model: %s\n"
++"\n"
++msgstr ""
++"\n"
++"================= hddtemp %s ==================\n"
++"Modell: %s\n"
++"\n"
++
++#: src/hddtemp.c:189
++#, c-format
++msgid ""
++"WARNING: Drive %s doesn't seem to have a temperature sensor.\n"
++"WARNING: This doesn't mean it hasn't got one.\n"
++"WARNING: If you are sure it has one, please contact me (hddtemp at guzu."
++"net).\n"
++"WARNING: See --help, --debug and --drivebase options.\n"
++msgstr ""
++"WARNUNG: Laufwerk %s scheint keinen Temperatur-Sensor zu haben.\n"
++"WARNUNG: Das bedeutet nicht, dass es keinen besitzt.\n"
++"WARNUNG: Falls Sie sicher sind, dass es einen besitzt, kontaktieren Sie "
++"mich bitte (hddtemp at guzu.net).\n"
++"WARNUNG: Siehe Optionen --help, --debug und --drivebase.\n"
++
++#: src/hddtemp.c:197
++#, c-format
++msgid "%s: %s: no sensor\n"
++msgstr "%s: %s: kein Sensor\n"
++
++#: src/hddtemp.c:211
++#, c-format
++msgid "%s: %s: %d%sC or %sF\n"
++msgstr "%s: %s: %d%s°C oder %s°F\n"
++
++#: src/hddtemp.c:235
++#, c-format
++msgid "%s: %s: drive is sleeping\n"
++msgstr "%s: %s: Laufwerk schläft\n"
++
++#: src/hddtemp.c:242
++#, c-format
++msgid "%s: %s: drive supported, but it doesn't have a temperature sensor.\n"
++msgstr ""
++"%s: %s: Laufwerk unterstützt, aber es hat keinen Temperatur-Sensor.\n"
++
++#: src/hddtemp.c:246
++#, c-format
++msgid "ERROR: %s: %s: unknown returned status\n"
++msgstr "FEHLER: %s: %s: zurückgegebener Status unbekannt\n"
++
++#: src/hddtemp.c:261
++#, c-format
++msgid ""
++"\n"
++"If one of the field value seems to match the temperature, be sure to read\n"
++"the hddtemp man page before sending a report (section REPORT). Thanks.\n"
++msgstr ""
++"\n"
++"Falls einer der Feldwerte der Temperatur zu entsprechen scheint, stellen "
++"Sie\n"
++"sicher, die hddtemp-Handbuchseite gelesen zu haben, bevor Sie einen "
++"Bericht\n"
++"senden (Abschnitt BERICHT). Danke.\n"
++
++#: src/hddtemp.c:338
++#, c-format
++msgid "ERROR: invalid separator.\n"
++msgstr "FEHLER: ungültiges Trennzeichen.\n"
++
++#: src/hddtemp.c:349
++#, c-format
++msgid "ERROR: invalid port number.\n"
++msgstr "FEHLER: ungültige Portnummer.\n"
++
++#: src/hddtemp.c:371
++#, c-format
++msgid ""
++" Usage: hddtemp [OPTIONS] [TYPE:]DISK1 [[TYPE:]DISK2]...\n"
++"\n"
++" hddtemp displays the temperature of drives supplied in argument.\n"
++" Drives must support S.M.A.R.T.\n"
++"\n"
++" TYPE could be SATA, PATA or SCSI. If omitted hddtemp will try to guess.\n"
++"\n"
++" -b --drivebase : display database file content that allow hddtemp "
++"to\n"
++" recognize supported drives.\n"
++" -D --debug : display various S.M.A.R.T. fields and their "
++"values.\n"
++" Useful to find a value that seems to match the\n"
++" temperature and/or to send me a report.\n"
++" (done for every drive supplied).\n"
++" -d --daemon : run hddtemp in TCP/IP daemon mode (port %d by "
++"default.)\n"
++" -f --file=FILE : specify database file to use.\n"
++" -F --foreground : don't daemonize, stay in foreground.\n"
++" -l --listen=addr : listen on a specific interface (in TCP/IP daemon "
++"mode).\n"
++" -n --numeric : print only the temperature.\n"
++" -p --port=# : port to listen to (in TCP/IP daemon mode).\n"
++" -s --separator=C : separator to use between fields (in TCP/IP daemon "
++"mode).\n"
++" -S --syslog=s : log temperature to syslog every s seconds.\n"
++" -u --unit=[C|F] : force output temperature either in Celsius or "
++"Fahrenheit.\n"
++" -q --quiet : do not check if the drive is supported.\n"
++" -v --version : display hddtemp version number.\n"
++" -w --wake-up : wake-up the drive if need.\n"
++" -4 : listen on IPv4 sockets only.\n"
++" -6 : listen on IPv6 sockets only.\n"
++"\n"
++"Report bugs or new drives to <hddtemp at guzu.net>.\n"
++msgstr ""
++" Verwendung: hddtemp [OPTIONEN] [TYP:]LAUFWERK1 [[TYP:]LAUFWERK2]...\n"
++"\n"
++" hddtemp zeigt die Temperatur der via Argument angegeben Laufwerke.\n"
++" Laufwerke müssen S.M.A.R.T. unterstützen.\n"
++"\n"
++" TYP kann SATA, PATA oder SCSI sein. Falls ausgelassen, wird hddtemp \n"
++" versuchen, diesen zu erraten.\n"
++"\n"
++" -b --drivebase : Datenbank-Datei-Inhalt anzeigen, der hddtemp "
++"erlaubt\n"
++" unterstützte Laufwerke zu erkennen.\n"
++" -D --debug : verschiedene S.M.A.R.T.-Felder und deren Werte "
++"anzeigen.\n"
++" Nützlich, um Werte zu finden, die der Temperatur "
++"entsprechen\n"
++" und/oder um mir einen Bericht zu senden.\n"
++" (bereits erledigt für jedes bereitgestellte "
++"Laufwerk).\n"
++" -d --daemon : hddtemp im TCP/IP-Daemon-Modus ausführen "
++"(Standardmäßig Port %d)\n"
++" -f --file=DATEI : zu verwendende Datenbank-Datei festlegen.\n"
++" -F --foreground : nicht daemonisieren, im Vordergrund bleiben.\n"
++" -l --listen=addr : auf einer bestimmten Schnittstelle auf Anfragen "
++"warten (im TCP/IP-Daemon-Modus).\n"
++" -n --numeric : nur die Temperatur ausgeben.\n"
++" -p --port=# : Port, auf dem auf Anfragen gewartet werden soll "
++"(im TCP/IP-Daemon-Modus).\n"
++" -s --separator=C : Trennzeichen zur Verwendung zwischen Feldern (im "
++"TCP/IP-Daemon-Modus).\n"
++" -S --syslog=s : Temperatur alle s Sekunden in das syslog "
++"eintragen.\n"
++" -u --unit=[C|F] : Ausgabe der Temperatur entweder in Celsius oder "
++"Fahrenheit erzwingen.\n"
++" -q --quiet : nicht prüfen, ob das Laufwerk unterstützt wird.\n"
++" -v --version : Versionsnummer von hddtemp anzeigen.\n"
++" -w --wake-up : Laufwerk bei Bedarf aufwecken.\n"
++" -4 : nur auf IPv4-Sockets auf Anfragen warten.\n"
++" -6 : nur auf IPv6-Sockets auf Anfragen warten.\n"
++"\n"
++"Fehler oder neue Laufwerke an <hddtemp at guzu.net> melden.\n"
++
++#: src/hddtemp.c:402
++#, c-format
++msgid "hddtemp version %s\n"
++msgstr "hddtemp Version %s\n"
++
++#: src/hddtemp.c:418
++#, c-format
++msgid "ERROR: invalid interval.\n"
++msgstr "FEHLER: ungültiges Intervall.\n"
++
++#: src/hddtemp.c:438
++#, c-format
++msgid "Too few arguments: you must specify one drive, at least.\n"
++msgstr "Zu wenige Argumente: Sie müssen mindestens ein Laufwerk angeben.\n"
++
++#: src/hddtemp.c:448
++#, c-format
++msgid "ERROR: can't use --debug and --daemon or --syslog options together.\n"
++msgstr ""
++"FEHLER: kann Optionen --debug und --daemon oder --syslog nicht zusammen "
++"verwenden.\n"
++
++#: src/hddtemp.c:505
++#, c-format
++msgid "ERROR: %s: can't determine bus type (or this bus type is unknown)\n"
++msgstr ""
++"FEHLER: %s: kann Bus-Typ nicht ermitteln (oder dieser Bus-Typ ist "
++"unbekannt)\n"
++
++#: src/ata.c:66 src/scsi.c:64
++msgid "unknown"
++msgstr "unbekannt"
++
++#: src/ata.c:85 src/ata.c:104 src/scsi.c:91
++#, c-format
++msgid "S.M.A.R.T. not available"
++msgstr "S.M.A.R.T. nicht verfügbar"
++
++#: src/db.c:115
++#, c-format
++msgid ""
++"\n"
++"Regexp%s| Value | Description\n"
++"------%s---------------------\n"
++msgstr ""
++"\n"
++"Regexp%s| Wert | Beschreibung\n"
++"------%s---------------------\n"
++
++#: src/db.c:121
++#, c-format
++msgid "%s%s| %5d | %s\n"
++msgstr "%s%s| %5d | %s\n"
++
++#: src/db.c:236
++#, c-format
++msgid "hddtemp: can't open %1$s: %2$s\n"
++msgstr "hddtemp: kann %1$s nicht öffnen: %2$s\n"
++
++#: src/db.c:250
++#, c-format
++msgid "ERROR: syntax error at line %1$d in %2$s\n"
++msgstr "FEHLER: Syntaxfehler in Zeile %1$d in %2$s\n"
++
++#: src/db.c:257
++#, c-format
++msgid " ERROR: line exceed %1$d characters in %2$s.\n"
++msgstr " FEHLER: Zeile überschreitet %1$d Zeichen in %2$s.\n"
++
++#: src/scsi.c:111 src/scsi.c:129
++#, c-format
++msgid "log sense failed : %s"
++msgstr "Protokoll-Erkennung fehlgeschlagen : %s"
+--- hddtemp-0.3-beta15.orig/po/LINGUAS
++++ hddtemp-0.3-beta15/po/LINGUAS
+@@ -1,2 +1,2 @@
+ # Set of available languages.
+-fr pt ru sv
++de fr pt ru sv
+--- hddtemp-0.3-beta15.orig/po/hddtemp.pot
++++ hddtemp-0.3-beta15/po/hddtemp.pot
+@@ -1,35 +1,22 @@
+-
+-# Copyright (C) 2006 Free Software Foundation, Inc.
+-# This file is distributed under the same license as the 'hddtemp' package.
+-# Emmanuel VARAGNAT <hddtemp at guzu.net>, 2006.
++# SOME DESCRIPTIVE TITLE.
++# Copyright (C) YEAR Free Software Foundation, Inc.
++# This file is distributed under the same license as the PACKAGE package.
++# FIRST AUTHOR <EMAIL at ADDRESS>, YEAR.
+ #
+ #, fuzzy
+ msgid ""
+ msgstr ""
+ "Project-Id-Version: PACKAGE VERSION\n"
+-"Report-Msgid-Bugs-To: hddtemp at guzu.net\n"
+-"POT-Creation-Date: 2005-02-25 22:43+0100\n"
++"Report-Msgid-Bugs-To: \n"
++"POT-Creation-Date: 2006-06-29 16:24+0200\n"
+ "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
+-"Last-Translator: Emmanuel Varagnat <hddtemp at guzu.net>\n"
++"Last-Translator: FULL NAME <EMAIL at ADDRESS>\n"
+ "Language-Team: LANGUAGE <LL at li.org>\n"
+ "MIME-Version: 1.0\n"
+ "Content-Type: text/plain; charset=CHARSET\n"
+ "Content-Transfer-Encoding: 8bit\n"
+
+-#: src/hddtemp.c:112
+-#, c-format
+-msgid ""
+-"\n"
+-"Regexp%s| Value | Description\n"
+-"------%s---------------------\n"
+-msgstr ""
+-
+-#: src/hddtemp.c:118
+-#, c-format
+-msgid "%s%s| %5d | %s\n"
+-msgstr ""
+-
+-#: src/hddtemp.c:161
++#: src/hddtemp.c:156
+ #, c-format
+ msgid ""
+ "\n"
+@@ -38,7 +25,7 @@
+ "\n"
+ msgstr ""
+
+-#: src/hddtemp.c:188
++#: src/hddtemp.c:189
+ #, c-format
+ msgid ""
+ "WARNING: Drive %s doesn't seem to have a temperature sensor.\n"
+@@ -47,67 +34,59 @@
+ "WARNING: See --help, --debug and --drivebase options.\n"
+ msgstr ""
+
+-#: src/hddtemp.c:192
+-#, c-format
+-msgid "%s: %s: no sensor\n"
+-msgstr ""
+-
+ #: src/hddtemp.c:197
+ #, c-format
+-msgid ""
+-"WARNING: Drive %s doesn't appear in the database of supported drives\n"
+-"WARNING: But using a common value, it reports something.\n"
+-"WARNING: Note that the temperature shown could be wrong.\n"
+-"WARNING: See --help, --debug and --drivebase options.\n"
+-"WARNING: And don't forget you can add your drive to hddtemp.db\n"
++msgid "%s: %s: no sensor\n"
+ msgstr ""
+
+-#: src/hddtemp.c:202
++#: src/hddtemp.c:211
+ #, c-format
+ msgid "%s: %s: %d%sC or %sF\n"
+ msgstr ""
+
+-#: src/hddtemp.c:214
++#: src/hddtemp.c:235
+ #, c-format
+ msgid "%s: %s: drive is sleeping\n"
+ msgstr ""
+
+-#: src/hddtemp.c:217
++#: src/hddtemp.c:242
+ #, c-format
+-msgid "%s: %s: known drive, but it doesn't have a temperature sensor.\n"
++msgid "%s: %s: drive supported, but it doesn't have a temperature sensor.\n"
+ msgstr ""
+
+-#: src/hddtemp.c:220
++#: src/hddtemp.c:246
+ #, c-format
+ msgid "ERROR: %s: %s: unknown returned status\n"
+ msgstr ""
+
+-#: src/hddtemp.c:235
++#: src/hddtemp.c:261
+ #, c-format
+ msgid ""
+ "\n"
+ "If one of the field value seems to match the temperature, be sure to read\n"
+-"the hddtemp man page before sending me a report (section REPORT). Thanks.\n"
++"the hddtemp man page before sending a report (section REPORT). Thanks.\n"
+ msgstr ""
+
+-#: src/hddtemp.c:308
++#: src/hddtemp.c:338
+ #, c-format
+ msgid "ERROR: invalid separator.\n"
+ msgstr ""
+
+-#: src/hddtemp.c:319
++#: src/hddtemp.c:349
+ #, c-format
+ msgid "ERROR: invalid port number.\n"
+ msgstr ""
+
+-#: src/hddtemp.c:329
++#: src/hddtemp.c:371
+ #, c-format
+ msgid ""
+-" Usage: hddtemp [OPTIONS] DISK1 [DISK2]...\n"
++" Usage: hddtemp [OPTIONS] [TYPE:]DISK1 [[TYPE:]DISK2]...\n"
+ "\n"
+ " hddtemp displays the temperature of drives supplied in argument.\n"
+ " Drives must support S.M.A.R.T.\n"
+ "\n"
++" TYPE could be SATA, PATA or SCSI. If omitted hddtemp will try to guess.\n"
++"\n"
+ " -b --drivebase : display database file content that allow hddtemp to\n"
+ " recognize supported drives.\n"
+ " -D --debug : display various S.M.A.R.T. fields and their values.\n"
+@@ -117,6 +96,7 @@
+ " -d --daemon : run hddtemp in TCP/IP daemon mode (port %d by "
+ "default.)\n"
+ " -f --file=FILE : specify database file to use.\n"
++" -F --foreground : don't daemonize, stay in foreground.\n"
+ " -l --listen=addr : listen on a specific interface (in TCP/IP daemon "
+ "mode).\n"
+ " -n --numeric : print only the temperature.\n"
+@@ -124,6 +104,8 @@
+ " -s --separator=C : separator to use between fields (in TCP/IP daemon "
+ "mode).\n"
+ " -S --syslog=s : log temperature to syslog every s seconds.\n"
++" -u --unit=[C|F] : force output temperature either in Celsius or "
++"Fahrenheit.\n"
+ " -q --quiet : do not check if the drive is supported.\n"
+ " -v --version : display hddtemp version number.\n"
+ " -w --wake-up : wake-up the drive if need.\n"
+@@ -133,58 +115,69 @@
+ "Report bugs or new drives to <hddtemp at guzu.net>.\n"
+ msgstr ""
+
+-#: src/hddtemp.c:522
++#: src/hddtemp.c:402
+ #, c-format
+ msgid "hddtemp version %s\n"
+ msgstr ""
+
+-#: src/hddtemp.c:547
++#: src/hddtemp.c:418
+ #, c-format
+ msgid "ERROR: invalid interval.\n"
+ msgstr ""
+
+-#: src/hddtemp.c:547
++#: src/hddtemp.c:438
++#, c-format
+ msgid "Too few arguments: you must specify one drive, at least.\n"
+ msgstr ""
+
+-#: src/hddtemp.c:557
++#: src/hddtemp.c:448
++#, c-format
+ msgid "ERROR: can't use --debug and --daemon or --syslog options together.\n"
+ msgstr ""
+
+-#: src/hddtemp.c:583
++#: src/hddtemp.c:505
+ #, c-format
+ msgid "ERROR: %s: can't determine bus type (or this bus type is unknown)\n"
+ msgstr ""
+
+-#: src/ata.c:66 src/scsi.c:68
++#: src/ata.c:66 src/scsi.c:64
+ msgid "unknown"
+ msgstr ""
+
+-#: src/ata.c:98
++#: src/ata.c:85 src/ata.c:104 src/scsi.c:91
+ #, c-format
+-msgid "field(%d)\t = %d\n"
++msgid "S.M.A.R.T. not available"
+ msgstr ""
+
+-#: src/ata.c:167
+-msgid "S.M.A.R.T. not available"
++#: src/db.c:115
++#, c-format
++msgid ""
++"\n"
++"Regexp%s| Value | Description\n"
++"------%s---------------------\n"
++msgstr ""
++
++#: src/db.c:121
++#, c-format
++msgid "%s%s| %5d | %s\n"
+ msgstr ""
+
+-#: src/db.c:180
++#: src/db.c:236
+ #, c-format
+ msgid "hddtemp: can't open %1$s: %2$s\n"
+ msgstr ""
+
+-#: src/db.c:194
++#: src/db.c:250
+ #, c-format
+ msgid "ERROR: syntax error at line %1$d in %2$s\n"
+ msgstr ""
+
+-#: src/db.c:201
++#: src/db.c:257
+ #, c-format
+ msgid " ERROR: line exceed %1$d characters in %2$s.\n"
+ msgstr ""
+
+-#: src/scsi.c:112 src/scsi.c:130
++#: src/scsi.c:111 src/scsi.c:129
+ #, c-format
+ msgid "log sense failed : %s"
+ msgstr ""
+--- hddtemp-0.3-beta15.orig/src/sata.c
++++ hddtemp-0.3-beta15/src/sata.c
+@@ -118,11 +118,22 @@
+ int i;
+ u16 * p;
+
+- if(dsk->db_entry && dsk->db_entry->attribute_id == 0) {
++ if(dsk->db_entry->attribute_id == 0) {
+ close(dsk->fd);
+ dsk->fd = -1;
+ return GETTEMP_NOSENSOR;
+ }
++
++ switch(ata_get_powermode(dsk->fd)) {
++ case PWM_STANDBY:
++ case PWM_SLEEPING:
++ if (!wakeup)
++ return GETTEMP_DRIVE_SLEEP;
++ case PWM_UNKNOWN:
++ case PWM_ACTIVE: /* active or idle */
++ default:
++ break;
++ }
+
+ /* get SMART values */
+ if(sata_enable_smart(dsk->fd) != 0) {
+@@ -154,24 +165,15 @@
+ }
+
+ /* temperature */
+- if(dsk->db_entry && dsk->db_entry->attribute_id > 0)
+- field = sata_search_temperature(values, dsk->db_entry->attribute_id);
+- else
+- field = sata_search_temperature(values, DEFAULT_ATTRIBUTE_ID);
++ field = sata_search_temperature(values, dsk->db_entry->attribute_id);
+
+ if(field)
+ dsk->value = *(field+3);
+
+ if(dsk->db_entry && dsk->value != -1)
+ return GETTEMP_KNOWN;
+- else {
+- if(dsk->value != -1) {
+- return GETTEMP_GUESS;
+- }
+- else {
+- return GETTEMP_UNKNOWN;
+- }
+- }
++ else
++ return GETTEMP_UNKNOWN;
+
+ /* never reached */
+ }
+--- hddtemp-0.3-beta15.orig/src/satacmds.c
++++ hddtemp-0.3-beta15/src/satacmds.c
+@@ -39,7 +39,7 @@
+ #include <sys/ioctl.h>
+ #include <scsi/sg.h>
+ #include <linux/hdreg.h>
+-#include <netinet/in.h>
++#include <byteswap.h>
+
+ // Application specific includes
+ #include "satacmds.h"
+@@ -80,8 +80,8 @@
+
+ ret = scsi_SG_IO(device, cdb, sizeof(cdb), buffer, cmd[3] * 512, sense, sizeof(sense), dxfer_direction);
+
+- /* Verify SATA magics */
+- if (sense[0] != 0x72 || sense[7] != 0x0e || sense[9] != 0x0e || sense[10] != 0x00)
++ /* Verify SATA magic */
++ if (sense[0] != 0x72)
+ return 1;
+ else
+ return ret;
+@@ -95,10 +95,10 @@
+ p = s;
+ end = &s[bytecount & ~1]; /* bytecount must be even */
+
+- /* convert from big-endian to host byte order */
++ /* convert from big-endian to string order */
+ for (p = end ; p != s;) {
+ unsigned short *pp = (unsigned short *) (p -= 2);
+- *pp = ntohs(*pp);
++ *pp = bswap_16(*pp);
+ }
+
+ /* strip leading blanks */
+--- hddtemp-0.3-beta15.orig/src/backtrace.c
++++ hddtemp-0.3-beta15/src/backtrace.c
+@@ -16,9 +16,10 @@
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
++#define _GNU_SOURCE
+ #include <features.h>
+
+-#if defined(__i386__) && defined(__GLIBC__)
++#if (defined(__i386__) || defined(__x86_64__)) && defined(__GLIBC__)
+
+ #include <execinfo.h>
+
+@@ -31,8 +32,12 @@
+ #include <bits/sigcontext.h>
+ #include <sys/param.h>
+
+-#define __USE_GNU
+ #include <ucontext.h>
++#if defined(__i386__)
++# define REG_IP REG_EIP
++#elif defined(__x86_64__)
++# define REG_IP REG_RIP
++#endif
+
+ #define MAX_BTSIZE 64
+
+@@ -42,7 +47,6 @@
+ static char **messages = NULL;
+ static size_t btsize = 0;
+ static size_t i;
+- static unsigned int old_eip, old_ebp;
+ static char *strerr = "???";
+ static FILE *fstrm;
+
+@@ -61,10 +65,10 @@
+ SIC_CASE(SEGV_MAPERR);
+ SIC_CASE(SEGV_ACCERR);
+ }
+- fprintf(fstrm, "=== SEGFAULT (%s) : invalid access to %p, in 0x%08x\n",
++ fprintf(fstrm, "=== SEGFAULT (%s) : invalid access to %p, in %p\n",
+ strerr,
+ ist->si_addr,
+- puc->uc_mcontext.gregs[REG_EIP]);
++ (void*)puc->uc_mcontext.gregs[REG_IP]);
+ break;
+ case SIGILL:
+ switch(ist->si_code) {
+@@ -77,10 +81,10 @@
+ SIC_CASE(ILL_COPROC);
+ SIC_CASE(ILL_BADSTK);
+ }
+- fprintf(fstrm, "=== ILLEGAL INSTR (%s) : invalid access to %p, in 0x%08x\n",
++ fprintf(fstrm, "=== ILLEGAL INSTR (%s) : invalid access to %p, in %p\n",
+ strerr,
+ ist->si_addr,
+- puc->uc_mcontext.gregs[REG_EIP]);
++ (void*)puc->uc_mcontext.gregs[REG_IP]);
+ break;
+ case SIGBUS:
+ switch(ist->si_code) {
+@@ -88,10 +92,10 @@
+ SIC_CASE(BUS_ADRERR);
+ SIC_CASE(BUS_OBJERR);
+ }
+- fprintf(fstrm, "=== BUS ERROR (%p) : invalid access to %p, in 0x%08x\n",
++ fprintf(fstrm, "=== BUS ERROR (%p) : invalid access to %p, in %p\n",
+ strerr,
+ ist->si_addr,
+- puc->uc_mcontext.gregs[REG_EIP]);
++ (void*)puc->uc_mcontext.gregs[REG_IP]);
+ break;
+ }
+ fflush(fstrm);
+@@ -101,7 +105,7 @@
+ /*
+ old_eip = *(unsigned int*)((void*)&n-4);
+ old_ebp = *(unsigned int*)((void*)&n-8);
+- *(unsigned int*)((void*)&n-4) = puc->uc_mcontext.gregs[REG_EIP];
++ *(unsigned int*)((void*)&n-4) = puc->uc_mcontext.gregs[REG_IP];
+ *(unsigned int*)((void*)&n-8) = puc->uc_mcontext.gregs[REG_EBP];
+
+ btsize = backtrace(btinfo, MAX_BTSIZE);
+@@ -111,14 +115,14 @@
+ */
+
+ btsize = backtrace(btinfo, MAX_BTSIZE);
+- btinfo[1] = (void*) puc->uc_mcontext.gregs[REG_EIP];
++ btinfo[1] = (void*) puc->uc_mcontext.gregs[REG_IP];
+
+ messages = backtrace_symbols(btinfo, btsize);
+
+ for(i = 1;
+ i < btsize;
+ i++)
+- fprintf(fstrm, "[%d] #%d: %s\n", getpid(), i, messages[i]);
++ fprintf(fstrm, "[%d] #%zu: %s\n", getpid(), i, messages[i]);
+ fflush(fstrm);
+ fclose(fstrm);
+
+--- hddtemp-0.3-beta15.orig/src/daemon.c
++++ hddtemp-0.3-beta15/src/daemon.c
+@@ -163,19 +163,16 @@
+
+ switch(dsk->ret) {
+ case GETTEMP_NOT_APPLICABLE:
+- n = snprintf(msg, sizeof(msg), "%s%c%s%c%s%c%c",
++ n = snprintf(msg, sizeof(msg), "%s%c%s%cNA%c*",
+ dsk->drive, separator,
+ dsk->model, separator,
+- "NA", separator,
+- '*');
++ separator);
+ break;
+- case GETTEMP_GUESS:
+ case GETTEMP_UNKNOWN:
+- n = snprintf(msg, sizeof(msg), "%s%c%s%c%s%c%c",
++ n = snprintf(msg, sizeof(msg), "%s%c%s%cUNK%c*",
+ dsk->drive, separator,
+- dsk->model, separator,
+- "UNK", separator,
+- '*');
++ dsk->model, separator,
++ separator);
+ break;
+ case GETTEMP_KNOWN:
+ n = snprintf(msg, sizeof(msg), "%s%c%s%c%d%c%c",
+@@ -185,26 +182,23 @@
+ get_unit(dsk));
+ break;
+ case GETTEMP_NOSENSOR:
+- n = snprintf(msg, sizeof(msg), "%s%c%s%c%s%c%c",
++ n = snprintf(msg, sizeof(msg), "%s%c%s%cNOS%c*",
+ dsk->drive, separator,
+ dsk->model, separator,
+- "NOS", separator,
+- '*');
++ separator);
+ break;
+ case GETTEMP_DRIVE_SLEEP:
+- n = snprintf(msg, sizeof(msg), "%s%c%s%c%s%c%c",
++ n = snprintf(msg, sizeof(msg), "%s%c%s%cSLP%c*",
+ dsk->drive, separator,
+ dsk->model, separator,
+- "SLP", separator,
+- '*');
++ separator);
+ break;
+ case GETTEMP_ERROR:
+ default:
+- n = snprintf(msg, sizeof(msg), "%s%c%s%c%s%c%c",
++ n = snprintf(msg, sizeof(msg), "%s%c%s%cERR%c*",
+ dsk->drive, separator,
+ (dsk->model) ? dsk->model : "???", separator,
+- "ERR", separator,
+- '*');
++ separator);
+ break;
+ }
+ write(cfd,&separator, 1);
+@@ -222,14 +216,11 @@
+ for(dsk = ldisks; dsk; dsk = dsk->next) {
+ switch(dsk->ret) {
+ case GETTEMP_KNOWN:
+- case GETTEMP_GUESS:
+- value_to_unit(dsk);
+-
+ syslog(LOG_INFO, "%s: %s: %d %c",
+ dsk->drive,
+ dsk->model,
+- dsk->value,
+- dsk->db_entry->unit);
++ value_to_unit(dsk),
++ get_unit(dsk));
+ break;
+ case GETTEMP_DRIVE_SLEEP:
+ syslog(LOG_WARNING, _("%s: %s: drive is sleeping"),
+@@ -270,28 +261,30 @@
+ fd_set deffds;
+ time_t next_time;
+
+- switch(fork()) {
+- case -1:
+- perror("fork");
+- exit(2);
+- break;
+- case 0:
+- break;
+- default:
+- exit(0);
+- }
+-
+- setsid();
+-
+- switch(fork()) {
+- case -1:
+- perror("fork");
+- exit(2);
+- break;
+- case 0:
+- break;
+- default:
+- exit(0);
++if (!foreground) {
++ switch(fork()) {
++ case -1:
++ perror("fork");
++ exit(2);
++ break;
++ case 0:
++ break;
++ default:
++ exit(0);
++ }
++
++ setsid();
++
++ switch(fork()) {
++ case -1:
++ perror("fork");
++ exit(2);
++ break;
++ case 0:
++ break;
++ default:
++ exit(0);
++ }
+ }
+ chdir("/");
+ umask(0);
+--- hddtemp-0.3-beta15.orig/src/hddtemp.c
++++ hddtemp-0.3-beta15/src/hddtemp.c
+@@ -75,7 +75,7 @@
+ char separator = SEPARATOR;
+
+ struct bustype * bus[BUS_TYPE_MAX];
+-int tcp_daemon, debug, quiet, numeric, wakeup, af_hint;
++int tcp_daemon, debug, quiet, numeric, wakeup, foreground, af_hint;
+
+ static enum { DEFAULT, CELSIUS, FAHRENHEIT } unit;
+
+@@ -194,23 +194,7 @@
+ if (numeric && quiet)
+ printf("0\n");
+ else
+- printf(_("%s: %s: no sensor\n"), dsk->drive, dsk->model);
+-
+- break;
+- case GETTEMP_GUESS:
+-
+- if(!quiet)
+- fprintf(stderr,
+- _("WARNING: Drive %s doesn't appear in the database of supported drives\n"
+- "WARNING: But using a common value, it reports something.\n"
+- "WARNING: Note that the temperature shown could be wrong.\n"
+- "WARNING: See --help, --debug and --drivebase options.\n"
+- "WARNING: And don't forget you can add your drive to hddtemp.db\n"), dsk->drive);
+-
+- if (! numeric)
+- printf(_("%s: %s: %d%sC or %sF\n"), dsk->drive, dsk->model, dsk->value, degree, degree);
+- else
+- printf("%d\n", value_to_unit(dsk));
++ fprintf(stderr, _("%s: %s: no sensor\n"), dsk->drive, dsk->model);
+
+ break;
+ case GETTEMP_KNOWN:
+@@ -232,14 +216,14 @@
+ if (numeric && quiet)
+ printf("0\n");
+ else
+- printf(_("%s: %s: drive is sleeping\n"), dsk->drive, dsk->model);
++ fprintf(stderr, _("%s: %s: drive is sleeping\n"), dsk->drive, dsk->model);
+
+ break;
+ case GETTEMP_NOSENSOR:
+ if (numeric && quiet)
+ printf("0\n");
+ else
+- printf(_("%s: %s: drive supported, but it doesn't have a temperature sensor.\n"), dsk->drive, dsk->model);
++ fprintf(stderr, _("%s: %s: drive supported, but it doesn't have a temperature sensor.\n"), dsk->drive, dsk->model);
+
+ break;
+ default:
+@@ -268,8 +252,9 @@
+
+ int main(int argc, char* argv[]) {
+ int i, c, lindex = 0, db_loaded = 0;
++ int ret = 0;
+ int show_db;
+- struct disk * ldisks;
++ struct disk * ldisks;
+
+ backtrace_sigsegv();
+ backtrace_sigill();
+@@ -279,7 +264,7 @@
+ bindtextdomain (PACKAGE, LOCALEDIR);
+ textdomain (PACKAGE);
+
+- show_db = debug = numeric = quiet = wakeup = af_hint = syslog_interval = 0;
++ show_db = debug = numeric = quiet = wakeup = af_hint = syslog_interval = foreground = 0;
+ unit = DEFAULT;
+ portnum = PORT_NUMBER;
+ listen_addr = NULL;
+@@ -294,6 +279,7 @@
+ {"drivebase", 0, NULL, 'b'},
+ {"debug", 0, NULL, 'D'},
+ {"file", 1, NULL, 'f'},
++ {"foreground", 0, NULL, 'F'},
+ {"listen", 1, NULL, 'l'},
+ {"version", 0, NULL, 'v'},
+ {"port", 1, NULL, 'p'},
+@@ -305,7 +291,7 @@
+ {0, 0, 0, 0}
+ };
+
+- c = getopt_long (argc, argv, "bDdf:l:hp:qs:u:vnw46S:", long_options, &lindex);
++ c = getopt_long (argc, argv, "bDdf:l:hp:qs:u:vnw46FS:", long_options, &lindex);
+ if (c == -1)
+ break;
+
+@@ -382,12 +368,13 @@
+ " (done for every drive supplied).\n"
+ " -d --daemon : run hddtemp in TCP/IP daemon mode (port %d by default.)\n"
+ " -f --file=FILE : specify database file to use.\n"
++ " -F --foreground : don't daemonize, stay in foreground.\n"
+ " -l --listen=addr : listen on a specific interface (in TCP/IP daemon mode).\n"
+ " -n --numeric : print only the temperature.\n"
+ " -p --port=# : port to listen to (in TCP/IP daemon mode).\n"
+ " -s --separator=C : separator to use between fields (in TCP/IP daemon mode).\n"
+ " -S --syslog=s : log temperature to syslog every s seconds.\n"
+- " -u --unit=[C|F] : force output temperature either in Celius or Fahrenheit.\n"
++ " -u --unit=[C|F] : force output temperature either in Celsius or Fahrenheit.\n"
+ " -q --quiet : do not check if the drive is supported.\n"
+ " -v --version : display hddtemp version number.\n"
+ " -w --wake-up : wake-up the drive if need.\n"
+@@ -418,6 +405,9 @@
+ }
+ }
+ break;
++ case 'F':
++ foreground = 1;
++ break;
+ default:
+ exit(1);
+ }
+@@ -489,6 +479,7 @@
+ if( (dsk->fd = open(dsk->drive, O_RDONLY | O_NONBLOCK)) < 0) {
+ snprintf(dsk->errormsg, MAX_ERRORMSG_SIZE, "open: %s\n", strerror(errno));
+ dsk->type = ERROR;
++ ret = 1;
+ continue;
+ }
+
+@@ -501,6 +492,7 @@
+
+ ldisks = dsk->next;
+ free(dsk);
++ ret = 1;
+ continue;
+ }
+
+@@ -514,11 +506,17 @@
+ db_loaded = 1;
+ }
+
++ dsk->db_entry = (struct harddrive_entry *)malloc(sizeof(struct harddrive_entry));
+ dbe = is_a_supported_drive(dsk->model);
+- if(dbe) {
+- dsk->db_entry = (struct harddrive_entry *)malloc(sizeof(struct harddrive_entry));
++ if(dbe)
+ memcpy(dsk->db_entry, dbe, sizeof(struct harddrive_entry));
+- }
++ else {
++ dsk->db_entry->regexp = "";
++ dsk->db_entry->description = "";
++ dsk->db_entry->attribute_id = DEFAULT_ATTRIBUTE_ID;
++ dsk->db_entry->unit = 'C';
++ dsk->db_entry->next = NULL;
++ }
+ }
+ }
+
+@@ -530,5 +528,5 @@
+ do_direct_mode(ldisks);
+ }
+
+- return 0;
++ return ret;
+ }
+--- hddtemp-0.3-beta15.orig/src/ata.c
++++ hddtemp-0.3-beta15/src/ata.c
+@@ -75,7 +75,7 @@
+ int i;
+ u16 * p;
+
+- if(dsk->db_entry && dsk->db_entry->attribute_id == 0) {
++ if(dsk->db_entry->attribute_id == 0) {
+ close(dsk->fd);
+ dsk->fd = -1;
+ return GETTEMP_NOSENSOR;
+@@ -140,24 +140,15 @@
+ */
+
+ /* temperature */
+- if(dsk->db_entry && dsk->db_entry->attribute_id > 0)
+- field = ata_search_temperature(values, dsk->db_entry->attribute_id);
+- else
+- field = ata_search_temperature(values, DEFAULT_ATTRIBUTE_ID);
++ field = ata_search_temperature(values, dsk->db_entry->attribute_id);
+
+ if(field)
+ dsk->value = *(field+3);
+
+- if(dsk->db_entry && dsk->value != -1)
++ if(dsk->value != -1)
+ return GETTEMP_KNOWN;
+- else {
+- if(dsk->value != -1) {
+- return GETTEMP_GUESS;
+- }
+- else {
+- return GETTEMP_UNKNOWN;
+- }
+- }
++ else
++ return GETTEMP_UNKNOWN;
+
+ /* never reached */
+ }
+--- hddtemp-0.3-beta15.orig/src/hddtemp.h
++++ hddtemp-0.3-beta15/src/hddtemp.h
+@@ -39,8 +39,6 @@
+ GETTEMP_ERROR, /* Error */
+ GETTEMP_NOT_APPLICABLE, /* */
+ GETTEMP_UNKNOWN, /* Drive is not in database */
+- GETTEMP_GUESS, /* Not in database, but something was guessed, user must
+- check that the temperature returned is correct */
+ GETTEMP_KNOWN, /* Drive appear in database */
+ GETTEMP_NOSENSOR, /* Drive appear in database but is known to have no sensor */
+ GETTEMP_DRIVE_SLEEP /* Drive is sleeping */
+@@ -78,7 +76,7 @@
+
+ extern struct bustype * bus[BUS_TYPE_MAX];
+ extern char errormsg[MAX_ERRORMSG_SIZE];
+-extern int tcp_daemon, debug, quiet, wakeup, af_hint;
++extern int tcp_daemon, debug, quiet, wakeup, af_hint, foreground;
+ extern char separator;
+ extern long portnum, syslog_interval;
+ extern char * listen_addr;
+--- hddtemp-0.3-beta15.orig/src/scsicmds.c
++++ hddtemp-0.3-beta15/src/scsicmds.c
+@@ -147,6 +147,7 @@
+ return 1;
+ else {
+ scsi_fixstring(buffer + 8, 24);
++ buffer[32] = 0;
+ return 0;
+ }
+ }
diff --git a/meta-oe/recipes-support/hddtemp/hddtemp_0.3-beta15.bb b/meta-oe/recipes-support/hddtemp/hddtemp_0.3-beta15.bb
new file mode 100644
index 0000000..fc38d86
--- /dev/null
+++ b/meta-oe/recipes-support/hddtemp/hddtemp_0.3-beta15.bb
@@ -0,0 +1,30 @@
+SUMMARY = "Hard disk temperature monitor daemon"
+SECTION = "console/network"
+LICENSE = "GPLv2+"
+
+SRC_URI = "http://download.savannah.nongnu.org/releases/hddtemp/hddtemp-0.3-beta15.tar.bz2 \
+ file://hddtemp-no-nls-support.patch \
+ file://hddtemp_0.3-beta15-52.diff \
+ file://hddtemp-0.3-beta15-autodetect-717479.patch \
+ file://hddtemp-db.patch;striplevel=0 \
+ file://hddtemp.db \
+ "
+
+SRC_URI[md5sum] = "8b829339e1ae9df701684ec239021bb8"
+SRC_URI[sha256sum] = "618541584054093d53be8a2d9e81c97174f30f00af91cb8700a97e442d79ef5b"
+
+LIC_FILES_CHKSUM = "file://GPL-2;md5=eb723b61539feef013de476e68b5c50a"
+
+inherit autotools gettext update-rc.d
+
+FILES_${PN} += "/usr/share/misc/hddtemp.db"
+
+do_install_append() {
+ install -d ${D}/usr/share/misc/
+ install -m 0644 ${WORKDIR}/hddtemp.db ${D}/usr/share/misc/hddtemp.db
+ install -d ${D}${sysconfdir}/init.d
+ install -m 0644 debian/init ${D}${sysconfdir}/init.d/hddtemp
+}
+
+INITSCRIPT_NAME = "hddtemp"
+INITSCRIPT_PARAMS = "start 99 2 3 4 5 . stop 20 0 1 6 ."
--
1.7.9.5
More information about the Openembedded-devel
mailing list