[oe] [meta-handheld][PATCH] linux-yocto_3.8: remove patch already upstream

Mon Apr 15 09:44:45 UTC 2013

On Mon, Apr 15, 2013 at 11:20:18AM +0200, Andrea Adami wrote:
> On Sun, Apr 14, 2013 at 8:40 PM, Martin Jansa <martin.jansa at gmail.com> wrote:
> > On Sun, Apr 14, 2013 at 07:50:31PM +0200, Andrea Adami wrote:
> >> * the spitz_pm patch was pushed upstream with commit
> >> * id 510fcb0d331f314cd20d0067d56f29302846f47b
> >> *
> >> * remove it to unbreak do_patch
> >
> > Now it builds with latest oe-core, but still doesn't boot for me.
> 
> There is an outstanding regression due to the power regulators rework:
> boot from SD/CF card is atm impossible on pxa Zaurus (and on collie
> too, until refresh of thesing's locomo_spi patch). We are working on
> it.
> 
> Thanks for your testings

Could you prepare some easy way to enable debug in all 3 components
(linux-kexecboot, kexecboot itself, linux)?

Something like we had in 
http://git.openembedded.org/meta-handheld/commit/?id=584e66b8e21a0f40b26f0a1d2fa5907856996336

It would be nice of occasional testers (which don't like l-y) to just 
flip one switch, rebuild and get useful output on serial line.

Cheers,

> 
> Cheers
> 
> Andrea
> 
> >
> >> Signed-off-by: Andrea Adami <andrea.adami at gmail.com>
> >> ---
> >>  .../linux/linux-yocto-3.8/akita/akita.scc          |  1 -
> >>  .../linux/linux-yocto-3.8/spitz/spitz.scc          |  1 -
> >>  .../linux/linux-yocto-3.8/spitz_pm.patch           | 53 ----------------------
> >>  3 files changed, 55 deletions(-)
> >>  delete mode 100644 recipes-kernel/linux/linux-yocto-3.8/spitz_pm.patch
> >>
> >> diff --git a/recipes-kernel/linux/linux-yocto-3.8/akita/akita.scc b/recipes-kernel/linux/linux-yocto-3.8/akita/akita.scc
> >> index e1549ef..bad38c4 100644
> >> --- a/recipes-kernel/linux/linux-yocto-3.8/akita/akita.scc
> >> +++ b/recipes-kernel/linux/linux-yocto-3.8/akita/akita.scc
> >> @@ -6,6 +6,5 @@ include ../zaurus-common.scc
> >>  include ../zaurus-usb-host.scc
> >>
> >>  patch sharpsl_param.patch
> >> -patch spitz_pm.patch
> >>  patch pxa27x-sa1100-rtc.patch
> >>  patch spi-pxa2xx-fix-mem.patch
> >> diff --git a/recipes-kernel/linux/linux-yocto-3.8/spitz/spitz.scc b/recipes-kernel/linux/linux-yocto-3.8/spitz/spitz.scc
> >> index fe6aac8..f9f9381 100644
> >> --- a/recipes-kernel/linux/linux-yocto-3.8/spitz/spitz.scc
> >> +++ b/recipes-kernel/linux/linux-yocto-3.8/spitz/spitz.scc
> >> @@ -5,6 +5,5 @@ include ../zaurus-common.scc
> >>  include ../zaurus-usb-host.scc
> >>
> >>  patch sharpsl_param.patch
> >> -patch spitz_pm.patch
> >>  patch pxa27x-sa1100-rtc.patch
> >>  patch spi-pxa2xx-fix-mem.patch
> >> diff --git a/recipes-kernel/linux/linux-yocto-3.8/spitz_pm.patch b/recipes-kernel/linux/linux-yocto-3.8/spitz_pm.patch
> >> deleted file mode 100644
> >> index 34bcb9d..0000000
> >> --- a/recipes-kernel/linux/linux-yocto-3.8/spitz_pm.patch
> >> +++ /dev/null
> >> @@ -1,53 +0,0 @@
> >> -Subject: [PATCH] [ARM] pxa/spitz_pm.c: Fix hang under certain conditions when resuming from STR.
> >> -
> >> -Devices that use spitz_pm.c will fail to resume
> >> -from STR (Suspend To Ram) when the charger plug is inserted
> >> -or removed when a device is in STR mode. The culprit is
> >> -a misconfigured gpio line - GPIO18. GPIO18 should be configured as a
> >> -regular GPIO input but it gets configured as an alternate function
> >> -GPIO18_RDY. And then later in postsuspend() it gets configured as
> >> -a regular GPIO18 input line.
> >> -
> >> -Fix this by removing the GPIO18_RDY configuration so that GPIO18
> >> -only gets configured as a regular gpio input.
> >> -
> >> -Signed-off-by: Marko Katic <dromede at gmail.com>
> >> ----
> >> - arch/arm/mach-pxa/spitz_pm.c |    8 ++------
> >> - 1 files changed, 2 insertions(+), 6 deletions(-)
> >> -
> >> -diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
> >> -index 438f02f..842596d 100644
> >> ---- a/arch/arm/mach-pxa/spitz_pm.c
> >> -+++ b/arch/arm/mach-pxa/spitz_pm.c
> >> -@@ -86,10 +86,7 @@ static void spitz_discharge1(int on)
> >> -     gpio_set_value(SPITZ_GPIO_LED_GREEN, on);
> >> - }
> >> -
> >> --static unsigned long gpio18_config[] = {
> >> --    GPIO18_RDY,
> >> --    GPIO18_GPIO,
> >> --};
> >> -+static unsigned long gpio18_config = GPIO18_GPIO;
> >> -
> >> - static void spitz_presuspend(void)
> >> - {
> >> -@@ -112,7 +109,7 @@ static void spitz_presuspend(void)
> >> -     PGSR3 &= ~SPITZ_GPIO_G3_STROBE_BIT;
> >> -     PGSR2 |= GPIO_bit(SPITZ_GPIO_KEY_STROBE0);
> >> -
> >> --    pxa2xx_mfp_config(&gpio18_config[0], 1);
> >> -+    pxa2xx_mfp_config(&gpio18_config, 1);
> >> -     gpio_request_one(18, GPIOF_OUT_INIT_HIGH, "Unknown");
> >> -     gpio_free(18);
> >> -
> >> -@@ -131,7 +128,6 @@ static void spitz_presuspend(void)
> >> -
> >> - static void spitz_postsuspend(void)
> >> - {
> >> --    pxa2xx_mfp_config(&gpio18_config[1], 1);
> >> - }
> >> -
> >> - static int spitz_should_wakeup(unsigned int resume_on_alarm)
> >> ---
> >> -1.7.4.1
> >> --
> >> 1.8.1.5
> >>
> >>
> >> _______________________________________________
> >> Openembedded-devel mailing list
> >> Openembedded-devel at lists.openembedded.org
> >> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
> >
> > --
> > Martin 'JaMa' Jansa     jabber: Martin.Jansa at gmail.com
> >
> > _______________________________________________
> > Openembedded-devel mailing list
> > Openembedded-devel at lists.openembedded.org
> > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
> >
> 
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel at lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel

-- 
Martin 'JaMa' Jansa     jabber: Martin.Jansa at gmail.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: Digital signature
URL: <http://lists.openembedded.org/pipermail/openembedded-devel/attachments/20130415/f21d97f4/attachment-0002.sig>