[oe] [meta-systemd 1/2] systemd: remove core recipes - they migrated to oe-core
Andreas Müller
schnitzeltony at googlemail.com
Mon Jan 28 13:12:03 UTC 2013
oe-core moved to systemd 197 so no package feeds should break
Signed-off-by: Andreas Müller <schnitzeltony at googlemail.com>
---
.../recipes-core/systemd/systemd-compat-units.bb | 59 ----
.../systemd/systemd-compat-units/machineid.service | 16 -
.../systemd-compat-units/run-postinsts.service | 17 -
.../recipes-core/systemd/systemd-serialgetty.bb | 46 ---
.../systemd/systemd-serialgetty/LICENSE | 339 --------------------
.../systemd-serialgetty/serial-getty at .service | 32 --
.../systemd/systemd-systemctl-native.bb | 18 -
.../systemd/systemd-systemctl-native/systemctl | 126 --------
...emd-analyze-use-argparse-instead-of-getop.patch | 103 ------
...-analyze-use-GDBus-instead-of-dbus-python.patch | 91 ------
.../recipes-core/systemd/systemd/gtk-doc.make | 230 -------------
.../recipes-core/systemd/systemd/modprobe.rules | 17 -
.../systemd/systemd/optional_secure_getenv.patch | 19 --
.../systemd-pam-configure-check-uclibc.patch | 26 --
.../systemd/systemd/systemd-pam-fix-execvpe.patch | 26 --
.../systemd/systemd-pam-fix-fallocate.patch | 82 -----
.../systemd/systemd-pam-fix-getty-unit.patch | 35 --
.../systemd/systemd/systemd-pam-fix-mkostemp.patch | 166 ----------
.../systemd/systemd/systemd-pam-fix-msformat.patch | 335 -------------------
.../recipes-core/systemd/systemd/touchscreen.rules | 18 -
.../recipes-core/systemd/systemd/var-run.conf | 4 -
meta-systemd/recipes-core/systemd/systemd_git.bb | 263 ---------------
22 files changed, 0 insertions(+), 2068 deletions(-)
delete mode 100644 meta-systemd/recipes-core/systemd/systemd-compat-units.bb
delete mode 100644 meta-systemd/recipes-core/systemd/systemd-compat-units/machineid.service
delete mode 100644 meta-systemd/recipes-core/systemd/systemd-compat-units/run-postinsts.service
delete mode 100644 meta-systemd/recipes-core/systemd/systemd-serialgetty.bb
delete mode 100644 meta-systemd/recipes-core/systemd/systemd-serialgetty/LICENSE
delete mode 100644 meta-systemd/recipes-core/systemd/systemd-serialgetty/serial-getty at .service
delete mode 100644 meta-systemd/recipes-core/systemd/systemd-systemctl-native.bb
delete mode 100755 meta-systemd/recipes-core/systemd/systemd-systemctl-native/systemctl
delete mode 100644 meta-systemd/recipes-core/systemd/systemd/0001-Revert-systemd-analyze-use-argparse-instead-of-getop.patch
delete mode 100644 meta-systemd/recipes-core/systemd/systemd/0002-Revert-analyze-use-GDBus-instead-of-dbus-python.patch
delete mode 100644 meta-systemd/recipes-core/systemd/systemd/gtk-doc.make
delete mode 100644 meta-systemd/recipes-core/systemd/systemd/modprobe.rules
delete mode 100644 meta-systemd/recipes-core/systemd/systemd/optional_secure_getenv.patch
delete mode 100644 meta-systemd/recipes-core/systemd/systemd/systemd-pam-configure-check-uclibc.patch
delete mode 100644 meta-systemd/recipes-core/systemd/systemd/systemd-pam-fix-execvpe.patch
delete mode 100644 meta-systemd/recipes-core/systemd/systemd/systemd-pam-fix-fallocate.patch
delete mode 100644 meta-systemd/recipes-core/systemd/systemd/systemd-pam-fix-getty-unit.patch
delete mode 100644 meta-systemd/recipes-core/systemd/systemd/systemd-pam-fix-mkostemp.patch
delete mode 100644 meta-systemd/recipes-core/systemd/systemd/systemd-pam-fix-msformat.patch
delete mode 100644 meta-systemd/recipes-core/systemd/systemd/touchscreen.rules
delete mode 100644 meta-systemd/recipes-core/systemd/systemd/var-run.conf
delete mode 100644 meta-systemd/recipes-core/systemd/systemd_git.bb
diff --git a/meta-systemd/recipes-core/systemd/systemd-compat-units.bb b/meta-systemd/recipes-core/systemd/systemd-compat-units.bb
deleted file mode 100644
index 6b6b4dd..0000000
--- a/meta-systemd/recipes-core/systemd/systemd-compat-units.bb
+++ /dev/null
@@ -1,59 +0,0 @@
-DESCRIPTION = "Units to make systemd work better with existing sysvinit scripts"
-
-LICENSE = "MIT"
-LIC_FILES_CHKSUM = "file://${COREBASE}/LICENSE;md5=3f40d7994397109285ec7b81fdeb3b58"
-
-PR = "r18"
-
-inherit allarch
-
-SRC_URI = "file://*.service"
-
-do_install() {
- install -d ${D}${systemd_unitdir}/system/basic.target.wants
- install -d ${D}${systemd_unitdir}/system/sysinit.target.wants/
- install -m 0644 ${WORKDIR}/run-postinsts.service ${D}${systemd_unitdir}/system
- ln -sf ../run-postinsts.service ${D}${systemd_unitdir}/system/basic.target.wants/
- ln -sf ../run-postinsts.service ${D}${systemd_unitdir}/system/sysinit.target.wants/
-
- install -m 0644 ${WORKDIR}/machineid.service ${D}${systemd_unitdir}/system
- ln -sf ../machineid.service ${D}${systemd_unitdir}/system/sysinit.target.wants/
- ln -sf ../machineid.service ${D}${systemd_unitdir}/system/basic.target.wants/
-
- # hack to make old style sysvinit postinsts succeed
- install -d ${D}${bindir}
- echo "echo 1" > ${D}${bindir}/runlevel
- chmod 0755 ${D}${bindir}/runlevel
-}
-
-SYSTEMD_DISABLED_SYSV_SERVICES = " \
- busybox-udhcpc \
- dnsmasq \
- hwclock \
- networking \
- syslog \
- syslog.busybox \
-"
-
-pkg_postinst_${PN} () {
-cd $D${sysconfdir}/init.d
-
-echo "Disabling the following sysv scripts: "
-
-OPTS=""
-
-if [ -n "$D" ]; then
- OPTS="--root=$D"
-fi
-
-for i in ${SYSTEMD_DISABLED_SYSV_SERVICES} ; do
- if [ \( -e $i -o $i.sh \) -a ! -e $D${sysconfdir}/systemd/system/$i.service ] ; then
- echo -n "$i: " ; systemctl ${OPTS} mask $i.service
- fi
-done ; echo
-}
-
-FILES_${PN} = "${systemd_unitdir}/system ${bindir}"
-RDPEPENDS_${PN} = "systemd"
-
-
diff --git a/meta-systemd/recipes-core/systemd/systemd-compat-units/machineid.service b/meta-systemd/recipes-core/systemd/systemd-compat-units/machineid.service
deleted file mode 100644
index cab8f76..0000000
--- a/meta-systemd/recipes-core/systemd/systemd-compat-units/machineid.service
+++ /dev/null
@@ -1,16 +0,0 @@
-[Unit]
-Description=Machine ID first boot configure
-DefaultDependencies=no
-ConditionPathExists=|!/etc/machine-id
-After=remount-rootfs.service
-Before=sysinit.target
-
-[Service]
-ExecStart=/bin/systemd-machine-id-setup
-RemainAfterExit=No
-Type=oneshot
-StandardOutput=syslog
-
-[Install]
-WantedBy=basic.target
-WantedBy=sysinit.target
diff --git a/meta-systemd/recipes-core/systemd/systemd-compat-units/run-postinsts.service b/meta-systemd/recipes-core/systemd/systemd-compat-units/run-postinsts.service
deleted file mode 100644
index da6fe76..0000000
--- a/meta-systemd/recipes-core/systemd/systemd-compat-units/run-postinsts.service
+++ /dev/null
@@ -1,17 +0,0 @@
-[Unit]
-Description=Run pending postinsts
-DefaultDependencies=no
-ConditionPathExists=|/etc/rcS.d/S98run-postinsts
-After=remount-rootfs.service tmp.mount
-Before=sysinit.target
-
-[Service]
-ExecStart=/etc/rcS.d/S98run-postinsts
-RemainAfterExit=No
-Type=oneshot
-StandardOutput=syslog
-TimeoutSec=0
-
-[Install]
-WantedBy=basic.target
-WantedBy=sysinit.target
diff --git a/meta-systemd/recipes-core/systemd/systemd-serialgetty.bb b/meta-systemd/recipes-core/systemd/systemd-serialgetty.bb
deleted file mode 100644
index c310672..0000000
--- a/meta-systemd/recipes-core/systemd/systemd-serialgetty.bb
+++ /dev/null
@@ -1,46 +0,0 @@
-DESCRIPTION = "Systemd serial config"
-LICENSE = "GPLv2+"
-LIC_FILES_CHKSUM = "file://${WORKDIR}/LICENSE;md5=751419260aa954499f7abaabaa882bbe"
-
-PR = "r3"
-
-SERIAL_CONSOLE ?= "115200 ttyS0"
-
-SRC_URI = "file://LICENSE \
- file://serial-getty@.service"
-
-def get_serial_console_value(d, index):
- c = d.getVar('SERIAL_CONSOLE', True)
-
- if len(c):
- return c.split()[index]
-
- return ""
-
-def get_baudrate(d):
- return get_serial_console_value(d, 0)
-
-def get_console(d):
- return get_serial_console_value(d, 1)
-
-do_install() {
- if [ ! ${@get_baudrate(d)} = "" ]; then
- sed -i -e s/\@BAUDRATE\@/${@get_baudrate(d)}/g ${WORKDIR}/serial-getty at .service
- install -d ${D}${systemd_unitdir}/system/
- install -d ${D}${sysconfdir}/systemd/system/getty.target.wants/
- install ${WORKDIR}/serial-getty at .service ${D}${systemd_unitdir}/system/
-
- # enable the service
- ln -sf ${systemd_unitdir}/system/serial-getty at .service \
- ${D}${sysconfdir}/systemd/system/getty.target.wants/serial-getty@${@get_console(d)}.service
- fi
-}
-
-PACKAGES = "${PN} ${PN}-dbg ${PN}-dev ${PN}-doc"
-
-RRECOMMENDS_${PN} = ""
-RDEPENDS_${PN} = "systemd"
-
-# This is a machine specific file
-FILES_${PN} = "${systemd_unitdir}/system/serial-getty at .service ${sysconfdir}"
-PACKAGE_ARCH = "${MACHINE_ARCH}"
diff --git a/meta-systemd/recipes-core/systemd/systemd-serialgetty/LICENSE b/meta-systemd/recipes-core/systemd/systemd-serialgetty/LICENSE
deleted file mode 100644
index d511905..0000000
--- a/meta-systemd/recipes-core/systemd/systemd-serialgetty/LICENSE
+++ /dev/null
@@ -1,339 +0,0 @@
- GNU GENERAL PUBLIC LICENSE
- Version 2, June 1991
-
- Copyright (C) 1989, 1991 Free Software Foundation, Inc.,
- 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
- Preamble
-
- The licenses for most software are designed to take away your
-freedom to share and change it. By contrast, the GNU General Public
-License is intended to guarantee your freedom to share and change free
-software--to make sure the software is free for all its users. This
-General Public License applies to most of the Free Software
-Foundation's software and to any other program whose authors commit to
-using it. (Some other Free Software Foundation software is covered by
-the GNU Lesser General Public License instead.) You can apply it to
-your programs, too.
-
- When we speak of free software, we are referring to freedom, not
-price. Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-this service if you wish), that you receive source code or can get it
-if you want it, that you can change the software or use pieces of it
-in new free programs; and that you know you can do these things.
-
- To protect your rights, we need to make restrictions that forbid
-anyone to deny you these rights or to ask you to surrender the rights.
-These restrictions translate to certain responsibilities for you if you
-distribute copies of the software, or if you modify it.
-
- For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must give the recipients all the rights that
-you have. You must make sure that they, too, receive or can get the
-source code. And you must show them these terms so they know their
-rights.
-
- We protect your rights with two steps: (1) copyright the software, and
-(2) offer you this license which gives you legal permission to copy,
-distribute and/or modify the software.
-
- Also, for each author's protection and ours, we want to make certain
-that everyone understands that there is no warranty for this free
-software. If the software is modified by someone else and passed on, we
-want its recipients to know that what they have is not the original, so
-that any problems introduced by others will not reflect on the original
-authors' reputations.
-
- Finally, any free program is threatened constantly by software
-patents. We wish to avoid the danger that redistributors of a free
-program will individually obtain patent licenses, in effect making the
-program proprietary. To prevent this, we have made it clear that any
-patent must be licensed for everyone's free use or not licensed at all.
-
- The precise terms and conditions for copying, distribution and
-modification follow.
-
- GNU GENERAL PUBLIC LICENSE
- TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
- 0. This License applies to any program or other work which contains
-a notice placed by the copyright holder saying it may be distributed
-under the terms of this General Public License. The "Program", below,
-refers to any such program or work, and a "work based on the Program"
-means either the Program or any derivative work under copyright law:
-that is to say, a work containing the Program or a portion of it,
-either verbatim or with modifications and/or translated into another
-language. (Hereinafter, translation is included without limitation in
-the term "modification".) Each licensee is addressed as "you".
-
-Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope. The act of
-running the Program is not restricted, and the output from the Program
-is covered only if its contents constitute a work based on the
-Program (independent of having been made by running the Program).
-Whether that is true depends on what the Program does.
-
- 1. You may copy and distribute verbatim copies of the Program's
-source code as you receive it, in any medium, provided that you
-conspicuously and appropriately publish on each copy an appropriate
-copyright notice and disclaimer of warranty; keep intact all the
-notices that refer to this License and to the absence of any warranty;
-and give any other recipients of the Program a copy of this License
-along with the Program.
-
-You may charge a fee for the physical act of transferring a copy, and
-you may at your option offer warranty protection in exchange for a fee.
-
- 2. You may modify your copy or copies of the Program or any portion
-of it, thus forming a work based on the Program, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
- a) You must cause the modified files to carry prominent notices
- stating that you changed the files and the date of any change.
-
- b) You must cause any work that you distribute or publish, that in
- whole or in part contains or is derived from the Program or any
- part thereof, to be licensed as a whole at no charge to all third
- parties under the terms of this License.
-
- c) If the modified program normally reads commands interactively
- when run, you must cause it, when started running for such
- interactive use in the most ordinary way, to print or display an
- announcement including an appropriate copyright notice and a
- notice that there is no warranty (or else, saying that you provide
- a warranty) and that users may redistribute the program under
- these conditions, and telling the user how to view a copy of this
- License. (Exception: if the Program itself is interactive but
- does not normally print such an announcement, your work based on
- the Program is not required to print an announcement.)
-
-These requirements apply to the modified work as a whole. If
-identifiable sections of that work are not derived from the Program,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works. But when you
-distribute the same sections as part of a whole which is a work based
-on the Program, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Program.
-
-In addition, mere aggregation of another work not based on the Program
-with the Program (or with a work based on the Program) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
- 3. You may copy and distribute the Program (or a work based on it,
-under Section 2) in object code or executable form under the terms of
-Sections 1 and 2 above provided that you also do one of the following:
-
- a) Accompany it with the complete corresponding machine-readable
- source code, which must be distributed under the terms of Sections
- 1 and 2 above on a medium customarily used for software interchange; or,
-
- b) Accompany it with a written offer, valid for at least three
- years, to give any third party, for a charge no more than your
- cost of physically performing source distribution, a complete
- machine-readable copy of the corresponding source code, to be
- distributed under the terms of Sections 1 and 2 above on a medium
- customarily used for software interchange; or,
-
- c) Accompany it with the information you received as to the offer
- to distribute corresponding source code. (This alternative is
- allowed only for noncommercial distribution and only if you
- received the program in object code or executable form with such
- an offer, in accord with Subsection b above.)
-
-The source code for a work means the preferred form of the work for
-making modifications to it. For an executable work, complete source
-code means all the source code for all modules it contains, plus any
-associated interface definition files, plus the scripts used to
-control compilation and installation of the executable. However, as a
-special exception, the source code distributed need not include
-anything that is normally distributed (in either source or binary
-form) with the major components (compiler, kernel, and so on) of the
-operating system on which the executable runs, unless that component
-itself accompanies the executable.
-
-If distribution of executable or object code is made by offering
-access to copy from a designated place, then offering equivalent
-access to copy the source code from the same place counts as
-distribution of the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
- 4. You may not copy, modify, sublicense, or distribute the Program
-except as expressly provided under this License. Any attempt
-otherwise to copy, modify, sublicense or distribute the Program is
-void, and will automatically terminate your rights under this License.
-However, parties who have received copies, or rights, from you under
-this License will not have their licenses terminated so long as such
-parties remain in full compliance.
-
- 5. You are not required to accept this License, since you have not
-signed it. However, nothing else grants you permission to modify or
-distribute the Program or its derivative works. These actions are
-prohibited by law if you do not accept this License. Therefore, by
-modifying or distributing the Program (or any work based on the
-Program), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Program or works based on it.
-
- 6. Each time you redistribute the Program (or any work based on the
-Program), the recipient automatically receives a license from the
-original licensor to copy, distribute or modify the Program subject to
-these terms and conditions. You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties to
-this License.
-
- 7. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License. If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Program at all. For example, if a patent
-license would not permit royalty-free redistribution of the Program by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Program.
-
-If any portion of this section is held invalid or unenforceable under
-any particular circumstance, the balance of the section is intended to
-apply and the section as a whole is intended to apply in other
-circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system, which is
-implemented by public license practices. Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
- 8. If the distribution and/or use of the Program is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Program under this License
-may add an explicit geographical distribution limitation excluding
-those countries, so that distribution is permitted only in or among
-countries not thus excluded. In such case, this License incorporates
-the limitation as if written in the body of this License.
-
- 9. The Free Software Foundation may publish revised and/or new versions
-of the General Public License from time to time. Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-Each version is given a distinguishing version number. If the Program
-specifies a version number of this License which applies to it and "any
-later version", you have the option of following the terms and conditions
-either of that version or of any later version published by the Free
-Software Foundation. If the Program does not specify a version number of
-this License, you may choose any version ever published by the Free Software
-Foundation.
-
- 10. If you wish to incorporate parts of the Program into other free
-programs whose distribution conditions are different, write to the author
-to ask for permission. For software which is copyrighted by the Free
-Software Foundation, write to the Free Software Foundation; we sometimes
-make exceptions for this. Our decision will be guided by the two goals
-of preserving the free status of all derivatives of our free software and
-of promoting the sharing and reuse of software generally.
-
- NO WARRANTY
-
- 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
-FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
-OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
-PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
-TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
-PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
-REPAIR OR CORRECTION.
-
- 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
-REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
-OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
-TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
-YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
-PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGES.
-
- END OF TERMS AND CONDITIONS
-
- How to Apply These Terms to Your New Programs
-
- If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
- To do so, attach the following notices to the program. It is safest
-to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
- <one line to give the program's name and a brief idea of what it does.>
- Copyright (C) <year> <name of author>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License along
- with this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-
-Also add information on how to contact you by electronic and paper mail.
-
-If the program is interactive, make it output a short notice like this
-when it starts in an interactive mode:
-
- Gnomovision version 69, Copyright (C) year name of author
- Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
- This is free software, and you are welcome to redistribute it
- under certain conditions; type `show c' for details.
-
-The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License. Of course, the commands you use may
-be called something other than `show w' and `show c'; they could even be
-mouse-clicks or menu items--whatever suits your program.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the program, if
-necessary. Here is a sample; alter the names:
-
- Yoyodyne, Inc., hereby disclaims all copyright interest in the program
- `Gnomovision' (which makes passes at compilers) written by James Hacker.
-
- <signature of Ty Coon>, 1 April 1989
- Ty Coon, President of Vice
-
-This General Public License does not permit incorporating your program into
-proprietary programs. If your program is a subroutine library, you may
-consider it more useful to permit linking proprietary applications with the
-library. If this is what you want to do, use the GNU Lesser General
-Public License instead of this License.
diff --git a/meta-systemd/recipes-core/systemd/systemd-serialgetty/serial-getty at .service b/meta-systemd/recipes-core/systemd/systemd-serialgetty/serial-getty at .service
deleted file mode 100644
index 8eeaab6..0000000
--- a/meta-systemd/recipes-core/systemd/systemd-serialgetty/serial-getty at .service
+++ /dev/null
@@ -1,32 +0,0 @@
-# This file is part of systemd.
-#
-# systemd is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-
-[Unit]
-Description=Serial Getty on %I
-BindTo=dev-%i.device
-After=dev-%i.device systemd-user-sessions.service
-
-# If additional gettys are spawned during boot then we should make
-# sure that this is synchronized before getty.target, even though
-# getty.target didn't actually pull it in.
-Before=getty.target
-
-[Service]
-Environment=TERM=vt100
-ExecStart=-/sbin/agetty -s %I @BAUDRATE@
-Restart=always
-RestartSec=0
-UtmpIdentifier=%I
-TTYPath=/dev/%I
-TTYReset=yes
-TTYVHangup=yes
-KillMode=process
-IgnoreSIGPIPE=no
-
-# Some login implementations ignore SIGTERM, so we send SIGHUP
-# instead, to ensure that login terminates cleanly.
-KillSignal=SIGHUP
diff --git a/meta-systemd/recipes-core/systemd/systemd-systemctl-native.bb b/meta-systemd/recipes-core/systemd/systemd-systemctl-native.bb
deleted file mode 100644
index c9c3317..0000000
--- a/meta-systemd/recipes-core/systemd/systemd-systemctl-native.bb
+++ /dev/null
@@ -1,18 +0,0 @@
-DESCRIPTION = "Wrapper to enable of systemd services"
-
-LICENSE = "MIT"
-LIC_FILES_CHKSUM = "file://${COREBASE}/LICENSE;md5=3f40d7994397109285ec7b81fdeb3b58"
-
-PR = "r7"
-
-inherit native
-
-# BPN is not enough in this case
-FILESPATH = "${FILE_DIRNAME}/${PN}/"
-
-SRC_URI = "file://systemctl"
-
-do_install() {
- install -d ${D}${bindir}
- install -m 0755 ${WORKDIR}/systemctl ${D}${bindir}
-}
diff --git a/meta-systemd/recipes-core/systemd/systemd-systemctl-native/systemctl b/meta-systemd/recipes-core/systemd/systemd-systemctl-native/systemctl
deleted file mode 100755
index d71c7ed..0000000
--- a/meta-systemd/recipes-core/systemd/systemd-systemctl-native/systemctl
+++ /dev/null
@@ -1,126 +0,0 @@
-#!/bin/sh
-echo "Started $0 $*"
-
-ROOT=
-
-# parse command line params
-action=
-while [ $# != 0 ]; do
- opt="$1"
-
- case "$opt" in
- enable)
- shift
-
- action="$opt"
- services="$1"
- cmd_args="1"
- shift
- ;;
- disable)
- shift
-
- action="$opt"
- services="$1"
- cmd_args="1"
- shift
- ;;
- mask)
- shift
-
- action="$opt"
- services="$1"
- cmd_args="1"
- shift
- ;;
- --root=*)
- ROOT=${opt##--root=}
- cmd_args="0"
- shift
- ;;
- *)
- if [ "$cmd_args" = "1" ]; then
- services="$services $opt"
- shift
- else
- echo "'$opt' is an unkown option; exiting with error"
- exit 1
- fi
- ;;
- esac
-done
-
-for service in $services; do
- if [ "$action" = "mask" ]; then
- if [ ! -d $ROOT/etc/systemd/system/ ]; then
- mkdir -p $ROOT/etc/systemd/system/
- fi
- cmd="ln -s /dev/null $ROOT/etc/systemd/system/$service"
- echo "$cmd"
- $cmd
- exit 0
- fi
-
- echo "Try to find location of $service..."
- # find service file
- for p in $ROOT/etc/systemd/system \
- $ROOT/lib/systemd/system \
- $ROOT/usr/lib/systemd/system; do
- if [ -e $p/$service ]; then
- service_file=$p/$service
- service_file=${service_file##$ROOT}
- fi
- done
- if [ -z "$service_file" ]; then
- echo "'$service' couldn't be found; exiting with error"
- exit 1
- fi
- echo "Found $service in $service_file"
-
- # create the required symbolic links
- wanted_by=$(grep WantedBy $ROOT/$service_file \
- | sed 's,WantedBy=,,g' \
- | tr ',' '\n' \
- | grep '\(\.target$\)\|\(\.service$\)')
-
- for r in $wanted_by; do
- echo "WantedBy=$r found in $service"
- if [ "$action" = "enable" ]; then
- mkdir -p $ROOT/etc/systemd/system/$r.wants
- ln -s $service_file $ROOT/etc/systemd/system/$r.wants
- echo "Enabled $service for $wanted_by."
- else
- rm -f $ROOT/etc/systemd/system/$r.wants/$service
- rmdir --ignore-fail-on-non-empty -p $ROOT/etc/systemd/system/$r.wants
- echo "Disabled $service for $wanted_by."
- fi
- done
-
- # create the required symbolic 'Alias' links
- alias=$(grep Alias $ROOT/$service_file \
- | sed 's,Alias=,,g' \
- | tr ',' '\n' \
- | grep '\.service$')
-
- for r in $alias; do
- if [ "$action" = "enable" ]; then
- mkdir -p $ROOT/etc/systemd/system
- ln -s $service_file $ROOT/etc/systemd/system/$r
- echo "Enabled $service for $alias."
- else
- rm -f $ROOT/etc/systemd/system/$r
- echo "Disabled $service for $alias."
- fi
- done
-
- # call us for the other required scripts
- also=$(grep Also $ROOT/$service_file \
- | sed 's,Also=,,g' \
- | tr ',' '\n')
- for a in $also; do
- echo "Also=$a found in $service"
- if [ "$action" = "enable" ]; then
- $0 --root=$ROOT enable $a
- fi
- done
-done
diff --git a/meta-systemd/recipes-core/systemd/systemd/0001-Revert-systemd-analyze-use-argparse-instead-of-getop.patch b/meta-systemd/recipes-core/systemd/systemd/0001-Revert-systemd-analyze-use-argparse-instead-of-getop.patch
deleted file mode 100644
index 7de2705..0000000
--- a/meta-systemd/recipes-core/systemd/systemd/0001-Revert-systemd-analyze-use-argparse-instead-of-getop.patch
+++ /dev/null
@@ -1,103 +0,0 @@
-From 2003e63f48cee2f497de7b90b66284f98c1c9919 Mon Sep 17 00:00:00 2001
-From: Koen Kooi <koen at dominion.thruhere.net>
-Date: Mon, 10 Dec 2012 12:24:32 +0100
-Subject: [PATCH 1/2] Revert "systemd-analyze: use argparse instead of getopt"
-
-This reverts commit 0c0271841ab45595f71528c50bcf1904d4b841d5.
-
-Argparse is broken in current OE python
----
- src/analyze/systemd-analyze | 60 ++++++++++++++++++++++++++++---------------
- 1 files changed, 39 insertions(+), 21 deletions(-)
-
-diff --git a/src/analyze/systemd-analyze b/src/analyze/systemd-analyze
-index 88699d6..87a83dd 100755
---- a/src/analyze/systemd-analyze
-+++ b/src/analyze/systemd-analyze
-@@ -1,7 +1,6 @@
- #!/usr/bin/python
-
--import sys, os
--import argparse
-+import getopt, sys, os
- from gi.repository import Gio
- try:
- import cairo
-@@ -76,6 +75,20 @@ def draw_text(context, x, y, text, size = 12, r = 0, g = 0, b = 0, vcenter = 0.5
-
- context.restore()
-
-+def usage():
-+ sys.stdout.write("""systemd-analyze [--user] time
-+systemd-analyze [--user] blame
-+systemd-analyze [--user] plot
-+
-+Process systemd profiling information
-+
-+ -h --help Show this help
-+""")
-+
-+def help():
-+ usage()
-+ sys.exit()
-+
- def time():
-
- initrd_time, start_time, finish_time = acquire_start_time()
-@@ -266,29 +279,34 @@ def plot():
-
- surface.finish()
-
--parser = argparse.ArgumentParser(formatter_class=argparse.RawDescriptionHelpFormatter,
-- description='Process systemd profiling information',
-- epilog='''\
--time - print time spent in the kernel before reaching userspace
--blame - print list of running units ordered by time to init
--plot - output SVG graphic showing service initialization
--''')
--
--parser.add_argument('action', choices=('time', 'blame', 'plot'),
-- default='time', nargs='?',
-- help='action to perform (default: time)')
--parser.add_argument('--user', action='store_true',
-- help='use the session bus')
-+def unknown_verb():
-+ sys.stderr.write("Unknown verb '%s'.\n" % args[0])
-+ usage()
-+ sys.exit(1)
-
--args = parser.parse_args()
-+bus = Gio.BusType.SYSTEM
-
--if args.user:
-- bus = Gio.BusType.SESSION
--else:
-- bus = Gio.BusType.SYSTEM
-+try:
-+ opts, args = getopt.gnu_getopt(sys.argv[1:], "h", ["help", "user"])
-+except getopt.GetoptError as err:
-+ sys.stdout.write(str(err) + "\n")
-+ usage()
-+ sys.exit(2)
-+for o, a in opts:
-+ if o in ("-h", "--help"):
-+ help()
-+ elif o == '--user':
-+ bus = Gio.BusType.SESSION
-+ else:
-+ assert False, "unhandled option"
-
- verb = {'time' : time,
- 'blame': blame,
- 'plot' : plot,
-+ 'help' : help,
- }
--verb.get(args.action)()
-+
-+if len(args) == 0:
-+ time()
-+else:
-+ verb.get(args[0], unknown_verb)()
---
-1.7.7.6
-
diff --git a/meta-systemd/recipes-core/systemd/systemd/0002-Revert-analyze-use-GDBus-instead-of-dbus-python.patch b/meta-systemd/recipes-core/systemd/systemd/0002-Revert-analyze-use-GDBus-instead-of-dbus-python.patch
deleted file mode 100644
index e5e8d7d..0000000
--- a/meta-systemd/recipes-core/systemd/systemd/0002-Revert-analyze-use-GDBus-instead-of-dbus-python.patch
+++ /dev/null
@@ -1,91 +0,0 @@
-From 8079db861b8ffdce69fa10a9ab9ef4740045187f Mon Sep 17 00:00:00 2001
-From: Koen Kooi <koen at dominion.thruhere.net>
-Date: Mon, 10 Dec 2012 12:25:00 +0100
-Subject: [PATCH 2/2] Revert "analyze: use GDBus instead of dbus-python"
-
-This reverts commit 4940c64240541e91411620b7dc0963e012aa6b91.
-
-Python-gobject is too old in current OE
----
- src/analyze/systemd-analyze | 31 ++++++++++++++-----------------
- 1 files changed, 14 insertions(+), 17 deletions(-)
-
-diff --git a/src/analyze/systemd-analyze b/src/analyze/systemd-analyze
-index 87a83dd..636fd74 100755
---- a/src/analyze/systemd-analyze
-+++ b/src/analyze/systemd-analyze
-@@ -1,15 +1,14 @@
- #!/usr/bin/python
-
--import getopt, sys, os
--from gi.repository import Gio
-+import getopt, dbus, sys, os
- try:
- import cairo
- except ImportError:
- cairo = None
-
- def acquire_time_data():
-- manager = Gio.DBusProxy.new_for_bus_sync(bus, Gio.DBusProxyFlags.NONE,
-- None, 'org.freedesktop.systemd1', '/org/freedesktop/systemd1', 'org.freedesktop.systemd1.Manager', None)
-+
-+ manager = dbus.Interface(bus.get_object('org.freedesktop.systemd1', '/org/freedesktop/systemd1'), 'org.freedesktop.systemd1.Manager')
- units = manager.ListUnits()
-
- l = []
-@@ -18,25 +17,23 @@ def acquire_time_data():
- if i[5] != "":
- continue
-
-- properties = Gio.DBusProxy.new_for_bus_sync(bus, Gio.DBusProxyFlags.NONE,
-- None, 'org.freedesktop.systemd1', i[6], 'org.freedesktop.DBus.Properties', None)
-+ properties = dbus.Interface(bus.get_object('org.freedesktop.systemd1', i[6]), 'org.freedesktop.DBus.Properties')
-
-- ixt = properties.Get('(ss)', 'org.freedesktop.systemd1.Unit', 'InactiveExitTimestampMonotonic')
-- aet = properties.Get('(ss)', 'org.freedesktop.systemd1.Unit', 'ActiveEnterTimestampMonotonic')
-- axt = properties.Get('(ss)', 'org.freedesktop.systemd1.Unit', 'ActiveExitTimestampMonotonic')
-- iet = properties.Get('(ss)', 'org.freedesktop.systemd1.Unit', 'InactiveEnterTimestampMonotonic')
-+ ixt = int(properties.Get('org.freedesktop.systemd1.Unit', 'InactiveExitTimestampMonotonic'))
-+ aet = int(properties.Get('org.freedesktop.systemd1.Unit', 'ActiveEnterTimestampMonotonic'))
-+ axt = int(properties.Get('org.freedesktop.systemd1.Unit', 'ActiveExitTimestampMonotonic'))
-+ iet = int(properties.Get('org.freedesktop.systemd1.Unit', 'InactiveEnterTimestampMonotonic'))
-
- l.append((str(i[0]), ixt, aet, axt, iet))
-
- return l
-
- def acquire_start_time():
-- properties = Gio.DBusProxy.new_for_bus_sync(bus, Gio.DBusProxyFlags.NONE,
-- None, 'org.freedesktop.systemd1', '/org/freedesktop/systemd1', 'org.freedesktop.DBus.Properties', None)
-+ properties = dbus.Interface(bus.get_object('org.freedesktop.systemd1', '/org/freedesktop/systemd1'), 'org.freedesktop.DBus.Properties')
-
-- initrd_time = properties.Get('(ss)', 'org.freedesktop.systemd1.Manager', 'InitRDTimestampMonotonic')
-- userspace_time = properties.Get('(ss)', 'org.freedesktop.systemd1.Manager', 'UserspaceTimestampMonotonic')
-- finish_time = properties.Get('(ss)', 'org.freedesktop.systemd1.Manager', 'FinishTimestampMonotonic')
-+ initrd_time = int(properties.Get('org.freedesktop.systemd1.Manager', 'InitRDTimestampMonotonic'))
-+ userspace_time = int(properties.Get('org.freedesktop.systemd1.Manager', 'UserspaceTimestampMonotonic'))
-+ finish_time = int(properties.Get('org.freedesktop.systemd1.Manager', 'FinishTimestampMonotonic'))
-
- if finish_time == 0:
- sys.stderr.write("Bootup is not yet finished. Please try again later.\n")
-@@ -284,7 +281,7 @@ def unknown_verb():
- usage()
- sys.exit(1)
-
--bus = Gio.BusType.SYSTEM
-+bus = dbus.SystemBus()
-
- try:
- opts, args = getopt.gnu_getopt(sys.argv[1:], "h", ["help", "user"])
-@@ -296,7 +293,7 @@ for o, a in opts:
- if o in ("-h", "--help"):
- help()
- elif o == '--user':
-- bus = Gio.BusType.SESSION
-+ bus = dbus.SessionBus()
- else:
- assert False, "unhandled option"
-
---
-1.7.7.6
-
diff --git a/meta-systemd/recipes-core/systemd/systemd/gtk-doc.make b/meta-systemd/recipes-core/systemd/systemd/gtk-doc.make
deleted file mode 100644
index 57fab98..0000000
--- a/meta-systemd/recipes-core/systemd/systemd/gtk-doc.make
+++ /dev/null
@@ -1,230 +0,0 @@
-# -*- mode: makefile -*-
-
-####################################
-# Everything below here is generic #
-####################################
-
-if GTK_DOC_USE_LIBTOOL
-GTKDOC_CC = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-GTKDOC_LD = $(LIBTOOL) --tag=CC --mode=link $(CC) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS)
-GTKDOC_RUN = $(LIBTOOL) --mode=execute
-else
-GTKDOC_CC = $(CC) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-GTKDOC_LD = $(CC) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS)
-GTKDOC_RUN =
-endif
-
-# We set GPATH here; this gives us semantics for GNU make
-# which are more like other make's VPATH, when it comes to
-# whether a source that is a target of one rule is then
-# searched for in VPATH/GPATH.
-#
-GPATH = $(srcdir)
-
-TARGET_DIR=$(HTML_DIR)/$(DOC_MODULE)
-
-EXTRA_DIST = \
- $(content_files) \
- $(HTML_IMAGES) \
- $(DOC_MAIN_SGML_FILE) \
- $(DOC_MODULE)-sections.txt \
- $(DOC_MODULE)-overrides.txt
-
-DOC_STAMPS=scan-build.stamp tmpl-build.stamp sgml-build.stamp html-build.stamp \
- pdf-build.stamp \
- $(srcdir)/tmpl.stamp $(srcdir)/sgml.stamp $(srcdir)/html.stamp \
- $(srcdir)/pdf.stamp
-
-SCANOBJ_FILES = \
- $(DOC_MODULE).args \
- $(DOC_MODULE).hierarchy \
- $(DOC_MODULE).interfaces \
- $(DOC_MODULE).prerequisites \
- $(DOC_MODULE).signals
-
-REPORT_FILES = \
- $(DOC_MODULE)-undocumented.txt \
- $(DOC_MODULE)-undeclared.txt \
- $(DOC_MODULE)-unused.txt
-
-CLEANFILES = $(SCANOBJ_FILES) $(REPORT_FILES) $(DOC_STAMPS)
-
-if ENABLE_GTK_DOC
-if GTK_DOC_BUILD_HTML
-HTML_BUILD_STAMP=html-build.stamp
-else
-HTML_BUILD_STAMP=
-endif
-if GTK_DOC_BUILD_PDF
-PDF_BUILD_STAMP=pdf-build.stamp
-else
-PDF_BUILD_STAMP=
-endif
-
-all-local: $(HTML_BUILD_STAMP) $(PDF_BUILD_STAMP)
-else
-all-local:
-endif
-
-docs: $(HTML_BUILD_STAMP) $(PDF_BUILD_STAMP)
-
-$(REPORT_FILES): sgml-build.stamp
-
-#### scan ####
-
-scan-build.stamp: $(HFILE_GLOB) $(CFILE_GLOB)
- @echo 'gtk-doc: Scanning header files'
- @-chmod -R u+w $(srcdir)
- @_source_dir='' ; for i in $(DOC_SOURCE_DIR) ; do \
- _source_dir="$${_source_dir} --source-dir=$$i" ; \
- done ; \
- cd $(srcdir) && \
- gtkdoc-scan --module=$(DOC_MODULE) --ignore-headers="$(IGNORE_HFILES)" $${_source_dir} $(SCAN_OPTIONS) $(EXTRA_HFILES)
- @if grep -l '^..*$$' $(srcdir)/$(DOC_MODULE).types > /dev/null 2>&1 ; then \
- CC="$(GTKDOC_CC)" LD="$(GTKDOC_LD)" RUN="$(GTKDOC_RUN)" CFLAGS="$(GTKDOC_CFLAGS) $(CFLAGS)" LDFLAGS="$(GTKDOC_LIBS) $(LDFLAGS)" gtkdoc-scangobj $(SCANGOBJ_OPTIONS) --module=$(DOC_MODULE) --output-dir=$(srcdir) ; \
- else \
- cd $(srcdir) ; \
- for i in $(SCANOBJ_FILES) ; do \
- test -f $$i || touch $$i ; \
- done \
- fi
- @touch scan-build.stamp
-
-$(DOC_MODULE)-decl.txt $(SCANOBJ_FILES) $(DOC_MODULE)-sections.txt $(DOC_MODULE)-overrides.txt: scan-build.stamp
- @true
-
-#### templates ####
-
-tmpl-build.stamp: $(DOC_MODULE)-decl.txt $(SCANOBJ_FILES) $(DOC_MODULE)-sections.txt $(DOC_MODULE)-overrides.txt
- @echo 'gtk-doc: Rebuilding template files'
- @-chmod -R u+w $(srcdir)
- @cd $(srcdir) && gtkdoc-mktmpl --module=$(DOC_MODULE) $(MKTMPL_OPTIONS)
- @touch tmpl-build.stamp
-
-tmpl.stamp: tmpl-build.stamp
- @true
-
-$(srcdir)/tmpl/*.sgml:
- @true
-
-#### xml ####
-
-sgml-build.stamp: tmpl.stamp $(DOC_MODULE)-sections.txt $(srcdir)/tmpl/*.sgml $(expand_content_files)
- @echo 'gtk-doc: Building XML'
- @-chmod -R u+w $(srcdir)
- @_source_dir='' ; for i in $(DOC_SOURCE_DIR) ; do \
- _source_dir="$${_source_dir} --source-dir=$$i" ; \
- done ; \
- cd $(srcdir) && \
- gtkdoc-mkdb --module=$(DOC_MODULE) --output-format=xml --expand-content-files="$(expand_content_files)" --main-sgml-file=$(DOC_MAIN_SGML_FILE) $${_source_dir} $(MKDB_OPTIONS)
- @touch sgml-build.stamp
-
-sgml.stamp: sgml-build.stamp
- @true
-
-#### html ####
-
-html-build.stamp: sgml.stamp $(DOC_MAIN_SGML_FILE) $(content_files)
- @echo 'gtk-doc: Building HTML'
- @-chmod -R u+w $(srcdir)
- @rm -rf $(srcdir)/html
- @mkdir $(srcdir)/html
- @mkhtml_options=""; \
- gtkdoc-mkhtml 2>&1 --help | grep >/dev/null "\-\-path"; \
- if test "$(?)" = "0"; then \
- mkhtml_options=--path="$(srcdir)"; \
- fi; \
- cd $(srcdir)/html && gtkdoc-mkhtml $$mkhtml_options $(MKHTML_OPTIONS) $(DOC_MODULE) ../$(DOC_MAIN_SGML_FILE)
- @test "x$(HTML_IMAGES)" = "x" || ( cd $(srcdir) && cp $(HTML_IMAGES) html )
- @echo 'gtk-doc: Fixing cross-references'
- @cd $(srcdir) && gtkdoc-fixxref --module=$(DOC_MODULE) --module-dir=html --html-dir=$(HTML_DIR) $(FIXXREF_OPTIONS)
- @touch html-build.stamp
-
-#### pdf ####
-
-pdf-build.stamp: sgml.stamp $(DOC_MAIN_SGML_FILE) $(content_files)
- @echo 'gtk-doc: Building PDF'
- @-chmod -R u+w $(srcdir)
- @rm -rf $(srcdir)/$(DOC_MODULE).pdf
- @mkpdf_imgdirs=""; \
- if test "x$(HTML_IMAGES)" != "x"; then \
- for img in $(HTML_IMAGES); do \
- part=`dirname $$img`; \
- echo $$mkpdf_imgdirs | grep >/dev/null "\-\-imgdir=$$part "; \
- if test $$? != 0; then \
- mkpdf_imgdirs="$$mkpdf_imgdirs --imgdir=$$part"; \
- fi; \
- done; \
- fi; \
- cd $(srcdir) && gtkdoc-mkpdf --path="$(abs_srcdir)" $$mkpdf_imgdirs $(DOC_MODULE) $(DOC_MAIN_SGML_FILE) $(MKPDF_OPTIONS)
- @touch pdf-build.stamp
-
-##############
-
-clean-local:
- rm -f *~ *.bak
- rm -rf .libs
-
-distclean-local:
- cd $(srcdir) && \
- rm -rf xml $(REPORT_FILES) $(DOC_MODULE).pdf \
- $(DOC_MODULE)-decl-list.txt $(DOC_MODULE)-decl.txt
-
-maintainer-clean-local: clean
- cd $(srcdir) && rm -rf xml html
-
-install-data-local:
- @installfiles=`echo $(srcdir)/html/*`; \
- if test "$$installfiles" = '$(srcdir)/html/*'; \
- then echo '-- Nothing to install' ; \
- else \
- if test -n "$(DOC_MODULE_VERSION)"; then \
- installdir="$(DESTDIR)$(TARGET_DIR)-$(DOC_MODULE_VERSION)"; \
- else \
- installdir="$(DESTDIR)$(TARGET_DIR)"; \
- fi; \
- $(mkinstalldirs) $${installdir} ; \
- for i in $$installfiles; do \
- echo '-- Installing '$$i ; \
- $(INSTALL_DATA) $$i $${installdir}; \
- done; \
- if test -n "$(DOC_MODULE_VERSION)"; then \
- mv -f $${installdir}/$(DOC_MODULE).devhelp2 \
- $${installdir}/$(DOC_MODULE)-$(DOC_MODULE_VERSION).devhelp2; \
- mv -f $${installdir}/$(DOC_MODULE).devhelp \
- $${installdir}/$(DOC_MODULE)-$(DOC_MODULE_VERSION).devhelp; \
- fi; \
- $(GTKDOC_REBASE) --relative --dest-dir=$(DESTDIR) --html-dir=$${installdir}; \
- fi
-
-uninstall-local:
- @if test -n "$(DOC_MODULE_VERSION)"; then \
- installdir="$(DESTDIR)$(TARGET_DIR)-$(DOC_MODULE_VERSION)"; \
- else \
- installdir="$(DESTDIR)$(TARGET_DIR)"; \
- fi; \
- rm -rf $${installdir}
-
-#
-# Require gtk-doc when making dist
-#
-if ENABLE_GTK_DOC
-dist-check-gtkdoc:
-else
-dist-check-gtkdoc:
- @echo "*** gtk-doc must be installed and enabled in order to make dist"
- @false
-endif
-
-dist-hook: dist-check-gtkdoc dist-hook-local
- mkdir $(distdir)/tmpl
- mkdir $(distdir)/html
- -cp $(srcdir)/tmpl/*.sgml $(distdir)/tmpl
- cp $(srcdir)/html/* $(distdir)/html
- -cp $(srcdir)/$(DOC_MODULE).pdf $(distdir)/
- -cp $(srcdir)/$(DOC_MODULE).types $(distdir)/
- -cp $(srcdir)/$(DOC_MODULE)-sections.txt $(distdir)/
- cd $(distdir) && rm -f $(DISTCLEANFILES)
- $(GTKDOC_REBASE) --online --relative --html-dir=$(distdir)/html
-
-.PHONY : dist-hook-local docs
diff --git a/meta-systemd/recipes-core/systemd/systemd/modprobe.rules b/meta-systemd/recipes-core/systemd/systemd/modprobe.rules
deleted file mode 100644
index d4a096b..0000000
--- a/meta-systemd/recipes-core/systemd/systemd/modprobe.rules
+++ /dev/null
@@ -1,17 +0,0 @@
-# There are a number of modifiers that are allowed to be used in some
-# of the different fields. They provide the following subsitutions:
-#
-# %n the "kernel number" of the device.
-# For example, 'sda3' has a "kernel number" of '3'
-# %e the smallest number for that name which does not matches an existing node
-# %k the kernel name for the device
-# %M the kernel major number for the device
-# %m the kernel minor number for the device
-# %b the bus id for the device
-# %c the string returned by the PROGRAM
-# %s{filename} the content of a sysfs attribute
-# %% the '%' char itself
-#
-
-# Try and modprobe for drivers for new hardware
-ACTION=="add", DEVPATH=="/devices/*", ENV{MODALIAS}=="?*", RUN+="/sbin/modprobe $env{MODALIAS}"
diff --git a/meta-systemd/recipes-core/systemd/systemd/optional_secure_getenv.patch b/meta-systemd/recipes-core/systemd/systemd/optional_secure_getenv.patch
deleted file mode 100644
index 35f1467..0000000
--- a/meta-systemd/recipes-core/systemd/systemd/optional_secure_getenv.patch
+++ /dev/null
@@ -1,19 +0,0 @@
-on uclibc secure_getenv is not available
-therefore default to using getenv instead
-
-Singed-off-by: Khem Raj <raj.khem at gmail.com>
-
-Upstream-Status: Pending
-Index: git/src/shared/missing.h
-===================================================================
---- git.orig/src/shared/missing.h 2012-09-22 18:46:44.141282145 -0700
-+++ git/src/shared/missing.h 2012-09-22 18:48:44.081276570 -0700
-@@ -233,6 +233,8 @@
- #ifndef HAVE_SECURE_GETENV
- # ifdef HAVE___SECURE_GETENV
- # define secure_getenv __secure_getenv
-+# elif defined __UCLIBC__
-+# define secure_getenv getenv
- # else
- # error neither secure_getenv nor __secure_getenv are available
- # endif
diff --git a/meta-systemd/recipes-core/systemd/systemd/systemd-pam-configure-check-uclibc.patch b/meta-systemd/recipes-core/systemd/systemd/systemd-pam-configure-check-uclibc.patch
deleted file mode 100644
index 1bfc3bd..0000000
--- a/meta-systemd/recipes-core/systemd/systemd/systemd-pam-configure-check-uclibc.patch
+++ /dev/null
@@ -1,26 +0,0 @@
---- systemd-185.orig/configure.ac 2012-06-04 14:15:16.000000000 -0400
-+++ systemd-pam-185/configure.ac 2012-06-21 22:57:10.000000000 -0400
-@@ -63,6 +63,23 @@
-
- AC_PATH_PROG([M4], [m4])
-
-+# check for few functions not implemented in uClibc
-+
-+AC_CHECK_FUNCS_ONCE(mkostemp execvpe posix_fallocate)
-+
-+# check for %ms format support - assume always no if cross compiling
-+
-+AC_MSG_CHECKING([whether %ms format is supported by *scanf])
-+
-+AC_RUN_IFELSE(
-+ [AC_LANG_PROGRAM([[ include <stdio.h> ]],
-+ [[ char *buf1, *buf2, *buf3, str="1 2.3 abcde" ;
-+ int rc = sscanf(str, "%ms %ms %ms", &buf1, &buf2, &buf3) ;
-+ return (rc==3)?0:1;]])],
-+ [AC_DEFINE([HAVE_MSFORMAT], [1], [Define if %ms format is supported by *scanf.])],
-+ [AC_MSG_RESULT([no])],
-+ [AC_MSG_RESULT([no])])
-+
- # gtkdocize greps for '^GTK_DOC_CHECK', so it needs to be on its own line
- m4_ifdef([GTK_DOC_CHECK], [
- GTK_DOC_CHECK([1.18],[--flavour no-tmpl])
diff --git a/meta-systemd/recipes-core/systemd/systemd/systemd-pam-fix-execvpe.patch b/meta-systemd/recipes-core/systemd/systemd/systemd-pam-fix-execvpe.patch
deleted file mode 100644
index 449c27f..0000000
--- a/meta-systemd/recipes-core/systemd/systemd/systemd-pam-fix-execvpe.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-Index: git/src/nspawn/nspawn.c
-===================================================================
---- git.orig/src/nspawn/nspawn.c 2012-09-22 17:57:05.000000000 -0700
-+++ git/src/nspawn/nspawn.c 2012-09-22 18:01:41.541405768 -0700
-@@ -63,6 +63,8 @@
- LINK_GUEST
- } LinkJournal;
-
-+#include "config.h"
-+
- static char *arg_directory = NULL;
- static char *arg_user = NULL;
- static char **arg_controllers = NULL;
-@@ -1373,7 +1375,12 @@
- a[0] = (char*) "/sbin/init";
- execve(a[0], a, (char**) envp);
- } else if (argc > optind)
-+#ifdef HAVE_EXECVPE
- execvpe(argv[optind], argv + optind, (char**) envp);
-+#else
-+ environ = (char **)envp;
-+ execvp(argv[optind], argv + optind);
-+#endif /* HAVE_EXECVPE */
- else {
- chdir(home ? home : "/root");
- execle("/bin/bash", "-bash", NULL, (char**) envp);
diff --git a/meta-systemd/recipes-core/systemd/systemd/systemd-pam-fix-fallocate.patch b/meta-systemd/recipes-core/systemd/systemd/systemd-pam-fix-fallocate.patch
deleted file mode 100644
index 089ba64..0000000
--- a/meta-systemd/recipes-core/systemd/systemd/systemd-pam-fix-fallocate.patch
+++ /dev/null
@@ -1,82 +0,0 @@
-Index: git/src/journal/journal-file.c
-===================================================================
---- git.orig/src/journal/journal-file.c 2012-09-02 09:49:15.126089594 -0700
-+++ git/src/journal/journal-file.c 2012-09-02 09:49:17.118089670 -0700
-@@ -34,6 +34,8 @@
- #include "compress.h"
- #include "fsprg.h"
-
-+#include "config.h"
-+
- #define DEFAULT_DATA_HASH_TABLE_SIZE (2047ULL*sizeof(HashItem))
- #define DEFAULT_FIELD_HASH_TABLE_SIZE (333ULL*sizeof(HashItem))
-
-@@ -262,7 +264,7 @@
-
- static int journal_file_allocate(JournalFile *f, uint64_t offset, uint64_t size) {
- uint64_t old_size, new_size;
-- int r;
-+ int r = 0;
-
- assert(f);
-
-@@ -307,10 +309,25 @@
- /* Note that the glibc fallocate() fallback is very
- inefficient, hence we try to minimize the allocation area
- as we can. */
-+#ifdef HAVE_POSIX_ALLOCATE
- r = posix_fallocate(f->fd, old_size, new_size - old_size);
- if (r != 0)
- return -r;
-
-+#else
-+ /* Use good old method to write zeros into the journal file
-+ perhaps very inefficient yet working. */
-+ if(new_size > old_size) {
-+ char *buf = alloca(new_size - old_size);
-+ off_t oldpos = lseek(f->fd, 0, SEEK_CUR);
-+ bzero(buf, new_size - old_size);
-+ lseek(f->fd, old_size, SEEK_SET);
-+ r = write(f->fd, buf, new_size - old_size);
-+ lseek(f->fd, oldpos, SEEK_SET);
-+ }
-+ if (r < 0)
-+ return -errno;
-+#endif /* HAVE_POSIX_FALLOCATE */
- if (fstat(f->fd, &f->last_stat) < 0)
- return -errno;
-
-Index: git/src/journal/journald-kmsg.c
-===================================================================
---- git.orig/src/journal/journald-kmsg.c 2012-09-02 09:49:15.130089595 -0700
-+++ git/src/journal/journald-kmsg.c 2012-09-02 12:26:17.326447895 -0700
-@@ -404,6 +404,7 @@
-
- int server_open_kernel_seqnum(Server *s) {
- int fd;
-+ int r = 0;
- uint64_t *p;
-
- assert(s);
-@@ -417,8 +418,19 @@
- log_error("Failed to open /run/systemd/journal/kernel-seqnum, ignoring: %m");
- return 0;
- }
--
-- if (posix_fallocate(fd, 0, sizeof(uint64_t)) < 0) {
-+#ifdef HAVE_POSIX_ALLOCATE
-+ r = posix_fallocate(fd, 0, sizeof(uint64_t));
-+#else
-+ /* Use good old method to write zeros into the journal file
-+ perhaps very inefficient yet working. */
-+ char *buf = alloca(sizeof(uint64_t));
-+ off_t oldpos = lseek(fd, 0, SEEK_CUR);
-+ bzero(buf, sizeof(uint64_t));
-+ lseek(fd, 0, SEEK_SET);
-+ r = write(fd, buf, sizeof(uint64_t));
-+ lseek(fd, oldpos, SEEK_SET);
-+#endif /* HAVE_POSIX_FALLOCATE */
-+ if (r < 0) {
- log_error("Failed to allocate sequential number file, ignoring: %m");
- close_nointr_nofail(fd);
- return 0;
diff --git a/meta-systemd/recipes-core/systemd/systemd/systemd-pam-fix-getty-unit.patch b/meta-systemd/recipes-core/systemd/systemd/systemd-pam-fix-getty-unit.patch
deleted file mode 100644
index 3e5ea71..0000000
--- a/meta-systemd/recipes-core/systemd/systemd/systemd-pam-fix-getty-unit.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-Prefer getty to agetty in console setup systemd units
-
-Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
----
- units/getty at .service.m4 | 2 +-
- units/serial-getty at .service.m4 | 2 +-
- 2 files changed, 2 insertions(+), 2 deletions(-)
-
-Index: systemd-37/units/getty at .service.m4
-===================================================================
---- systemd-37.orig/units/getty at .service.m4
-+++ systemd-37/units/getty at .service.m4
-@@ -41,7 +41,7 @@
-
- [Service]
- Environment=TERM=linux
- # the VT is cleared by TTYVTDisallocate
--ExecStart=-/sbin/agetty --noclear %I 38400
-+ExecStart=-/sbin/getty -L %I 115200 linux
- Type=idle
- Restart=always
- RestartSec=0
-Index: systemd-37/units/serial-getty at .service.m4
-===================================================================
---- systemd-37.orig/units/serial-getty at .service.m4
-+++ systemd-37/units/serial-getty at .service.m4
-@@ -37,7 +37,7 @@
-
- [Service]
- Environment=TERM=vt102
--ExecStart=-/sbin/agetty -s %I 115200,38400,9600
-+ExecStart=-/sbin/getty -L %I 115200 vt100
- Type=idle
- Restart=always
- RestartSec=0
diff --git a/meta-systemd/recipes-core/systemd/systemd/systemd-pam-fix-mkostemp.patch b/meta-systemd/recipes-core/systemd/systemd/systemd-pam-fix-mkostemp.patch
deleted file mode 100644
index 8de9a3a..0000000
--- a/meta-systemd/recipes-core/systemd/systemd/systemd-pam-fix-mkostemp.patch
+++ /dev/null
@@ -1,166 +0,0 @@
-Index: git/src/journal/journal-send.c
-===================================================================
---- git.orig/src/journal/journal-send.c 2012-09-02 00:10:08.748768268 -0700
-+++ git/src/journal/journal-send.c 2012-09-02 00:10:10.508768335 -0700
-@@ -34,6 +34,8 @@
-
- #define SNDBUF_SIZE (8*1024*1024)
-
-+#include "config.h"
-+
- /* We open a single fd, and we'll share it with the current process,
- * all its threads, and all its subprocesses. This means we need to
- * initialize it atomically, and need to operate on it atomically
-@@ -293,7 +295,12 @@
- * file and just pass a file descriptor of it to the other
- * side */
-
-+#ifdef HAVE_MKOSTEMP
- buffer_fd = mkostemp(path, O_CLOEXEC|O_RDWR);
-+#else
-+ buffer_fd = mkstemp(path);
-+ if (buffer_fd >= 0) fcntl(buffer_fd, F_SETFD, FD_CLOEXEC);
-+#endif /* HAVE_MKOSTEMP */
- if (buffer_fd < 0) {
- r = -errno;
- goto finish;
-Index: git/src/core/manager.c
-===================================================================
---- git.orig/src/core/manager.c 2012-09-02 00:10:08.732768266 -0700
-+++ git/src/core/manager.c 2012-09-02 00:10:10.512768334 -0700
-@@ -67,6 +67,8 @@
- #include "cgroup-util.h"
- #include "path-util.h"
-
-+#include "config.h"
-+
- /* As soon as 16 units are in our GC queue, make sure to run a gc sweep */
- #define GC_QUEUE_ENTRIES_MAX 16
-
-@@ -1701,7 +1703,12 @@
- return -ENOMEM;
-
- saved_umask = umask(0077);
-+#ifdef HAVE_MKOSTEMP
- fd = mkostemp(path, O_RDWR|O_CLOEXEC);
-+#else
-+ fd = mkstemp(path);
-+ if (fd >= 0) fcntl(fd, F_SETFD, FD_CLOEXEC);
-+#endif /* HAVE_MKOSTEMP */
- umask(saved_umask);
-
- if (fd < 0) {
-Index: git/src/shared/util.c
-===================================================================
---- git.orig/src/shared/util.c 2012-09-02 00:10:08.784768269 -0700
-+++ git/src/shared/util.c 2012-09-02 00:10:10.512768334 -0700
-@@ -68,6 +68,8 @@
- #include "exit-status.h"
- #include "hashmap.h"
-
-+#include "config.h"
-+
- int saved_argc = 0;
- char **saved_argv = NULL;
-
-@@ -4519,7 +4521,12 @@
- t[k] = '.';
- stpcpy(stpcpy(t+k+1, fn), "XXXXXX");
-
-+#ifdef HAVE_MKOSTEMP
- fd = mkostemp(t, O_WRONLY|O_CLOEXEC);
-+#else
-+ fd = mkstemp(t);
-+ if (fd >= 0) fcntl(fd, F_SETFD, FD_CLOEXEC);
-+#endif /* HAVE_MKOSTEMP */
- if (fd < 0) {
- free(t);
- return -errno;
-Index: git/src/shared/ask-password-api.c
-===================================================================
---- git.orig/src/shared/ask-password-api.c 2012-09-02 00:10:08.772768268 -0700
-+++ git/src/shared/ask-password-api.c 2012-09-02 00:10:10.512768334 -0700
-@@ -37,6 +37,8 @@
-
- #include "ask-password-api.h"
-
-+#include "config.h"
-+
- static void backspace_chars(int ttyfd, size_t p) {
-
- if (ttyfd < 0)
-@@ -326,7 +328,12 @@
- mkdir_p_label("/run/systemd/ask-password", 0755);
-
- u = umask(0022);
-+#ifdef HAVE_MKOSTEMP
- fd = mkostemp(temp, O_CLOEXEC|O_CREAT|O_WRONLY);
-+#else
-+ fd = mkstemp(temp);
-+ if (fd >= 0) fcntl(fd, F_SETFD, FD_CLOEXEC);
-+#endif /* HAVE_MKOSTEMP */
- umask(u);
-
- if (fd < 0) {
-Index: git/src/journal/journalctl.c
-===================================================================
---- git.orig/src/journal/journalctl.c 2012-09-02 00:10:08.752768267 -0700
-+++ git/src/journal/journalctl.c 2012-09-02 00:18:41.928787779 -0700
-@@ -540,7 +540,13 @@
- n /= arg_interval;
-
- close_nointr_nofail(fd);
-+#ifdef HAVE_MKOSTEMP
- fd = mkostemp(k, O_WRONLY|O_CLOEXEC|O_NOCTTY);
-+#else
-+ fd = mkstemp(k);
-+ if (fd >= 0) fcntl(fd, F_SETFD, FD_CLOEXEC);
-+#endif /* HAVE_MKOSTEMP */
-+
- if (fd < 0) {
- log_error("Failed to open %s: %m", k);
- r = -errno;
-Index: git/src/journal/journal-verify.c
-===================================================================
---- git.orig/src/journal/journal-verify.c 2012-09-02 00:10:08.752768267 -0700
-+++ git/src/journal/journal-verify.c 2012-09-02 00:24:10.268800268 -0700
-@@ -693,8 +693,12 @@
- #endif
- } else if (f->seal)
- return -ENOKEY;
--
-+#ifdef HAVE_MKOSTEMP
- data_fd = mkostemp(data_path, O_CLOEXEC);
-+#else
-+ data_fd = mkstemp(data_path);
-+ if (data_fd >= 0) fcntl(data_fd, F_SETFD, FD_CLOEXEC);
-+#endif /* HAVE_MKOSTEMP */
- if (data_fd < 0) {
- log_error("Failed to create data file: %m");
- r = -errno;
-@@ -702,7 +706,12 @@
- }
- unlink(data_path);
-
-+#ifdef HAVE_MKOSTEMP
- entry_fd = mkostemp(entry_path, O_CLOEXEC);
-+#else
-+ entry_fd = mkstemp(entry_path);
-+ if (entry_fd >= 0) fcntl(entry_fd, F_SETFD, FD_CLOEXEC);
-+#endif /* HAVE_MKOSTEMP */
- if (entry_fd < 0) {
- log_error("Failed to create entry file: %m");
- r = -errno;
-@@ -710,7 +719,12 @@
- }
- unlink(entry_path);
-
-+#ifdef HAVE_MKOSTEMP
- entry_array_fd = mkostemp(entry_array_path, O_CLOEXEC);
-+#else
-+ entry_array_fd = mkstemp(entry_array_path);
-+ if (entry_array_fd >= 0) fcntl(entry_array_fd, F_SETFD, FD_CLOEXEC);
-+#endif /* HAVE_MKOSTEMP */
- if (entry_array_fd < 0) {
- log_error("Failed to create entry array file: %m");
- r = -errno;
diff --git a/meta-systemd/recipes-core/systemd/systemd/systemd-pam-fix-msformat.patch b/meta-systemd/recipes-core/systemd/systemd/systemd-pam-fix-msformat.patch
deleted file mode 100644
index ee63329..0000000
--- a/meta-systemd/recipes-core/systemd/systemd/systemd-pam-fix-msformat.patch
+++ /dev/null
@@ -1,335 +0,0 @@
---- systemd-pam-185/src/fsck/fsck.c.orig 2012-06-22 23:22:22.000000000 -0400
-+++ systemd-pam-185/src/fsck/fsck.c 2012-06-22 21:15:56.000000000 -0400
-@@ -36,6 +36,8 @@
- #include "bus-errors.h"
- #include "virt.h"
-
-+#include "config.h"
-+
- static bool arg_skip = false;
- static bool arg_force = false;
- static bool arg_show_progress = false;
-@@ -193,9 +195,16 @@
- char *device;
- double p;
- usec_t t;
--
-+#ifdef HAVE_MSFORMAT
- if (fscanf(f, "%i %lu %lu %ms", &pass, &cur, &max, &device) != 4)
-- break;
-+#else
-+ device = malloc(257);
-+ if (fscanf(f, "%i %lu %lu %256s", &pass, &cur, &max, device) != 4) {
-+ free(device);
-+ }
-+
-+#endif /* HAVE_MSFORMAT */
-+ break;
-
- /* Only show one progress counter at max */
- if (!locked) {
---- systemd-pam-185/src/core/swap.c.orig 2012-06-22 23:22:55.000000000 -0400
-+++ systemd-pam-185/src/core/swap.c 2012-06-22 21:17:10.000000000 -0400
-@@ -40,6 +40,8 @@
- #include "def.h"
- #include "path-util.h"
-
-+#include "config.h"
-+
- static const UnitActiveState state_translation_table[_SWAP_STATE_MAX] = {
- [SWAP_DEAD] = UNIT_INACTIVE,
- [SWAP_ACTIVATING] = UNIT_ACTIVATING,
-@@ -1038,7 +1040,7 @@
- for (i = 1;; i++) {
- char *dev = NULL, *d;
- int prio = 0, k;
--
-+#ifdef HAVE_MSFORMAT
- if ((k = fscanf(m->proc_swaps,
- "%ms " /* device/file */
- "%*s " /* type of swap */
-@@ -1046,10 +1048,18 @@
- "%*s " /* used */
- "%i\n", /* priority */
- &dev, &prio)) != 2) {
--
-+#else
-+ dev = malloc(257);
-+ if ((k = fscanf(m->proc_swaps,
-+ "%256s " /* device/file */
-+ "%*s " /* type of swap */
-+ "%*s " /* swap size */
-+ "%*s " /* used */
-+ "%i\n", /* priority */
-+ dev, &prio)) != 2) {
-+#endif /* HAVE_MSFORMAT */
- if (k == EOF)
- break;
--
- log_warning("Failed to parse /proc/swaps:%u.", i);
- free(dev);
- continue;
---- systemd-pam-185/src/core/mount-setup.c.orig 2012-06-22 23:23:41.000000000 -0400
-+++ systemd-pam-185/src/core/mount-setup.c 2012-06-22 21:19:44.000000000 -0400
-@@ -28,6 +28,7 @@
- #include <assert.h>
- #include <unistd.h>
- #include <ftw.h>
-+#include <linux/fs.h>
-
- #include "mount-setup.h"
- #include "dev-setup.h"
-@@ -41,6 +41,8 @@
- #include "path-util.h"
- #include "missing.h"
-
-+#include "config.h"
-+
- #ifndef TTY_GID
- #define TTY_GID 5
- #endif
-@@ -200,9 +202,12 @@
- for (;;) {
- char *controller;
- int enabled = 0;
--
-+#ifdef HAVE_MSFORMAT
- if (fscanf(f, "%ms %*i %*i %i", &controller, &enabled) != 2) {
--
-+#else
-+ controller = malloc(257);
-+ if (fscanf(f, "%256s %*i %*i %i", controller, &enabled) != 2) {
-+#endif /* HAVE_MSFORMAT */
- if (feof(f))
- break;
-
---- systemd-pam-185/src/core/mount.c.orig 2012-06-22 23:24:17.000000000 -0400
-+++ systemd-pam-185/src/core/mount.c 2012-06-22 22:51:21.000000000 -0400
-@@ -41,6 +41,8 @@
- #include "exit-status.h"
- #include "def.h"
-
-+#include "config.h"
-+
- static const UnitActiveState state_translation_table[_MOUNT_STATE_MAX] = {
- [MOUNT_DEAD] = UNIT_INACTIVE,
- [MOUNT_MOUNTING] = UNIT_ACTIVATING,
-@@ -1514,7 +1516,7 @@
- int k;
-
- device = path = options = options2 = fstype = d = p = o = NULL;
--
-+#ifdef HAVE_MSFORMAT
- if ((k = fscanf(m->proc_self_mountinfo,
- "%*s " /* (1) mount id */
- "%*s " /* (2) parent id */
-@@ -1533,7 +1535,31 @@
- &fstype,
- &device,
- &options2)) != 5) {
--
-+#else
-+ path = malloc(257);
-+ options = malloc(257);
-+ fstype = malloc(257);
-+ device = malloc(257);
-+ options2 = malloc(257);
-+ if ((k = fscanf(m->proc_self_mountinfo,
-+ "%*s " /* (1) mount id */
-+ "%*s " /* (2) parent id */
-+ "%*s " /* (3) major:minor */
-+ "%*s " /* (4) root */
-+ "%256s " /* (5) mount point */
-+ "%256s" /* (6) mount options */
-+ "%*[^-]" /* (7) optional fields */
-+ "- " /* (8) separator */
-+ "%256s " /* (9) file system type */
-+ "%256s" /* (10) mount source */
-+ "%256s" /* (11) mount options 2 */
-+ "%*[^\n]", /* some rubbish at the end */
-+ path,
-+ options,
-+ fstype,
-+ device,
-+ options2)) != 5) {
-+#endif /* HAVE_MSFORMAT */
- if (k == EOF)
- break;
-
---- systemd-pam-185/src/core/umount.c.orig 2012-06-22 23:24:37.000000000 -0400
-+++ systemd-pam-185/src/core/umount.c 2012-06-22 22:56:15.000000000 -0400
-@@ -35,6 +35,8 @@
- #include "path-util.h"
- #include "util.h"
-
-+#include "config.h"
-+
- typedef struct MountPoint {
- char *path;
- dev_t devnum;
-@@ -74,7 +76,7 @@
- MountPoint *m;
-
- path = p = NULL;
--
-+#ifdef HAVE_MSFORMAT
- if ((k = fscanf(proc_self_mountinfo,
- "%*s " /* (1) mount id */
- "%*s " /* (2) parent id */
-@@ -89,6 +91,23 @@
- "%*s" /* (11) mount options 2 */
- "%*[^\n]", /* some rubbish at the end */
- &path)) != 1) {
-+#else
-+ path = malloc(257);
-+ if ((k = fscanf(proc_self_mountinfo,
-+ "%*s " /* (1) mount id */
-+ "%*s " /* (2) parent id */
-+ "%*s " /* (3) major:minor */
-+ "%*s " /* (4) root */
-+ "%256s " /* (5) mount point */
-+ "%*s" /* (6) mount options */
-+ "%*[^-]" /* (7) optional fields */
-+ "- " /* (8) separator */
-+ "%*s " /* (9) file system type */
-+ "%*s" /* (10) mount source */
-+ "%*s" /* (11) mount options 2 */
-+ "%*[^\n]", /* some rubbish at the end */
-+ path)) != 1) {
-+#endif /* HAVE_MSFORMAT */
- if (k == EOF)
- break;
-
-@@ -150,7 +169,7 @@
- MountPoint *swap;
- char *dev = NULL, *d;
- int k;
--
-+#ifdef HAVE_MSFORMAT
- if ((k = fscanf(proc_swaps,
- "%ms " /* device/file */
- "%*s " /* type of swap */
-@@ -158,7 +177,16 @@
- "%*s " /* used */
- "%*s\n", /* priority */
- &dev)) != 1) {
--
-+#else
-+ dev = malloc(257);
-+ if ((k = fscanf(proc_swaps,
-+ "%256s " /* device/file */
-+ "%*s " /* type of swap */
-+ "%*s " /* swap size */
-+ "%*s " /* used */
-+ "%*s\n", /* priority */
-+ dev)) != 1) {
-+#endif /* HAVE_MSFORMAT */
- if (k == EOF)
- break;
-
---- systemd-pam-185/src/shared/socket-util.c.orig 2012-06-22 23:25:00.000000000 -0400
-+++ systemd-pam-185/src/shared/socket-util.c 2012-06-22 22:59:27.000000000 -0400
-@@ -39,6 +39,8 @@
- #include "socket-util.h"
- #include "missing.h"
-
-+#include "config.h"
-+
- int socket_address_parse(SocketAddress *a, const char *s) {
- int r;
- char *e, *n;
-@@ -201,8 +203,16 @@
- a->type = SOCK_RAW;
-
- errno = 0;
-- if (sscanf(s, "%ms %u", &sfamily, &group) < 1)
-+#ifdef HAVE_MSFORMAT
-+ if (sscanf(s, "%ms %u", &sfamily, &group) < 1)
-+ return errno ? -errno : -EINVAL;
-+#else
-+ sfamily = malloc(257);
-+ if (sscanf(s, "%256s %u", sfamily, &group) < 1) {
-+ free(sfamily);
- return errno ? -errno : -EINVAL;
-+ }
-+#endif /* HAVE_MSFORMAT */
-
- if ((family = netlink_family_from_string(sfamily)) < 0)
- if (safe_atoi(sfamily, &family) < 0) {
---- systemd-pam-185/src/tmpfiles/tmpfiles.c.orig 2012-06-22 23:25:21.000000000 -0400
-+++ systemd-pam-185/src/tmpfiles/tmpfiles.c 2012-06-22 23:13:49.000000000 -0400
-@@ -48,6 +48,8 @@
- #include "set.h"
- #include "conf-files.h"
-
-+#include "config.h"
-+
- /* This reads all files listed in /etc/tmpfiles.d/?*.conf and creates
- * them in the file system. This is intended to be used to create
- * properly owned directories beneath /tmp, /var/tmp, /run, which are
-@@ -970,7 +972,7 @@
- i = new0(Item, 1);
- if (!i)
- return log_oom();
--
-+#ifdef HAVE_MSFORMAT
- if (sscanf(buffer,
- "%c "
- "%ms "
-@@ -986,6 +988,28 @@
- &group,
- &age,
- &n) < 2) {
-+#else
-+ i->path = malloc(257);
-+ mode = malloc(257);
-+ user = malloc(257);
-+ group = malloc(257);
-+ age = malloc(257);
-+ if (sscanf(buffer,
-+ "%c "
-+ "%256s "
-+ "%256s "
-+ "%256s "
-+ "%256s "
-+ "%256s "
-+ "%n",
-+ &type,
-+ i->path,
-+ mode,
-+ user,
-+ group,
-+ age,
-+ &n) < 2) {
-+#endif /* HAVE_MSFORMAT */
- log_error("[%s:%u] Syntax error.", fname, line);
- r = -EIO;
- goto finish;
---- systemd-pam-185/src/cryptsetup/cryptsetup-generator.c.orig 2012-06-22 23:25:47.000000000 -0400
-+++ systemd-pam-185/src/cryptsetup/cryptsetup-generator.c 2012-06-22 23:16:35.000000000 -0400
-@@ -30,6 +30,8 @@
- #include "virt.h"
- #include "strv.h"
-
-+#include "config.h"
-+
- static const char *arg_dest = "/tmp";
- static bool arg_enabled = true;
- static bool arg_read_crypttab = true;
-@@ -421,8 +423,15 @@
- l = strstrip(line);
- if (*l == '#' || *l == 0)
- continue;
--
-+#ifdef HAVE_MSFORMAT
- k = sscanf(l, "%ms %ms %ms %ms", &name, &device, &password, &options);
-+#else
-+ name = malloc(257);
-+ device = malloc(257);
-+ password = malloc(257);
-+ options = malloc(257);
-+ k = sscanf(l, "%256s %256s %256s %256s", name, device, password, options);
-+#endif /* HAVE_MSFORMAT */
- if (k < 2 || k > 4) {
- log_error("Failed to parse /etc/crypttab:%u, ignoring.", n);
- r = EXIT_FAILURE;
diff --git a/meta-systemd/recipes-core/systemd/systemd/touchscreen.rules b/meta-systemd/recipes-core/systemd/systemd/touchscreen.rules
deleted file mode 100644
index d83fd16..0000000
--- a/meta-systemd/recipes-core/systemd/systemd/touchscreen.rules
+++ /dev/null
@@ -1,18 +0,0 @@
-# There are a number of modifiers that are allowed to be used in some
-# of the different fields. They provide the following subsitutions:
-#
-# %n the "kernel number" of the device.
-# For example, 'sda3' has a "kernel number" of '3'
-# %e the smallest number for that name which does not matches an existing node
-# %k the kernel name for the device
-# %M the kernel major number for the device
-# %m the kernel minor number for the device
-# %b the bus id for the device
-# %c the string returned by the PROGRAM
-# %s{filename} the content of a sysfs attribute
-# %% the '%' char itself
-#
-
-# Create a symlink to any touchscreen input device
-SUBSYSTEM=="input", KERNEL=="event[0-9]*", ATTRS{modalias}=="input:*-e0*,3,*a0,1,*18,*", SYMLINK+="input/touchscreen0"
-SUBSYSTEM=="input", KERNEL=="event[0-9]*", ATTRS{modalias}=="ads7846", SYMLINK+="input/touchscreen0"
diff --git a/meta-systemd/recipes-core/systemd/systemd/var-run.conf b/meta-systemd/recipes-core/systemd/systemd/var-run.conf
deleted file mode 100644
index c2c18e2..0000000
--- a/meta-systemd/recipes-core/systemd/systemd/var-run.conf
+++ /dev/null
@@ -1,4 +0,0 @@
-# empty /var/run
-R /var/run/* - - - - -
-# systemd-update-utmp-runlevel.service fails to start without this
-f /var/run/utmp 0644 root root - -
diff --git a/meta-systemd/recipes-core/systemd/systemd_git.bb b/meta-systemd/recipes-core/systemd/systemd_git.bb
deleted file mode 100644
index f2e168e..0000000
--- a/meta-systemd/recipes-core/systemd/systemd_git.bb
+++ /dev/null
@@ -1,263 +0,0 @@
-DESCRIPTION = "Systemd a init replacement"
-HOMEPAGE = "http://www.freedesktop.org/wiki/Software/systemd"
-
-LICENSE = "GPLv2 & LGPLv2.1 & MIT"
-LIC_FILES_CHKSUM = "file://LICENSE.GPL2;md5=751419260aa954499f7abaabaa882bbe \
- file://LICENSE.LGPL2.1;md5=f0df8fd67dfa1db3cc0bd431837f0b89 \
- file://LICENSE.MIT;md5=544799d0b492f119fa04641d1b8868ed"
-
-PROVIDES = "udev"
-
-DEPENDS = "xz kmod docbook-sgml-dtd-4.1-native intltool-native gperf-native acl readline dbus libcap libcgroup tcp-wrappers usbutils glib-2.0 libgcrypt python"
-DEPENDS += "${@base_contains('DISTRO_FEATURES', 'pam', 'libpam', '', d)}"
-
-SERIAL_CONSOLE ?= "115200 /dev/ttyS0"
-
-SECTION = "base/shell"
-
-inherit gitpkgv
-PKGV = "v${GITPKGVTAG}"
-
-PV = "git"
-PR = "r13"
-
-# need to export these variables for python-config to work
-export BUILD_SYS
-export HOST_SYS
-export STAGING_INCDIR
-export STAGING_LIBDIR
-
-inherit useradd pkgconfig autotools perlnative pythonnative python-dir
-
-SRCREV = "decd634e801bee2c554edb35383cc9d43417a850"
-SRC_URI = "git://anongit.freedesktop.org/systemd/systemd;protocol=git \
- file://0001-Revert-systemd-analyze-use-argparse-instead-of-getop.patch \
- file://0002-Revert-analyze-use-GDBus-instead-of-dbus-python.patch \
- file://gtk-doc.make \
- file://touchscreen.rules \
- file://modprobe.rules \
- file://var-run.conf \
- ${UCLIBCPATCHES} \
- "
-UCLIBCPATCHES = ""
-UCLIBCPATCHES_libc-uclibc = "file://systemd-pam-configure-check-uclibc.patch \
- file://systemd-pam-fix-execvpe.patch \
- file://systemd-pam-fix-fallocate.patch \
- file://systemd-pam-fix-getty-unit.patch \
- file://systemd-pam-fix-mkostemp.patch \
- file://systemd-pam-fix-msformat.patch \
- file://optional_secure_getenv.patch \
- "
-LDFLAGS_libc-uclibc_append = " -lrt"
-
-S = "${WORKDIR}/git"
-
-SYSTEMDDISTRO ?= "debian"
-SYSTEMDDISTRO_angstrom = "angstrom"
-
-CACHED_CONFIGUREVARS = "ac_cv_file__usr_share_pci_ids=no \
- ac_cv_file__usr_share_hwdata_pci_ids=no \
- ac_cv_file__usr_share_misc_pci_ids=yes"
-# The gtk+ tools should get built as a separate recipe e.g. systemd-tools
-EXTRA_OECONF = " --with-distro=${SYSTEMDDISTRO} \
- --with-rootprefix=${base_prefix} \
- --with-rootlibdir=${base_libdir} \
- --sbindir=${base_sbindir} \
- --libexecdir=${base_libdir} \
- ${@base_contains('DISTRO_FEATURES', 'pam', '--enable-pam', '--disable-pam', d)} \
- --enable-xz \
- --disable-manpages \
- --disable-coredump \
- --disable-introspection \
- --with-pci-ids-path=/usr/share/misc \
- --disable-gtk-doc-html \
- --disable-tcpwrap \
- --enable-split-usr \
- --disable-microhttpd \
- --with-python \
- "
-
-# There's no docbook-xsl-native, so for the xsltproc check to false
-do_configure_prepend() {
- export CPP="${HOST_PREFIX}cpp ${TOOLCHAIN_OPTIONS} ${HOST_CC_ARCH}"
- sed -i /xsltproc/d configure.ac
-
- cp ${WORKDIR}/gtk-doc.make ${S}/docs/
-
- # we only have /home/root, not /root
- sed -i -e 's:=/root:=/home/root:g' units/*.service*
-}
-
-do_install() {
- autotools_do_install
- install -d ${D}${base_sbindir}
- # provided by a seperate recipe
- rm ${D}${systemd_unitdir}/system/serial-getty* -f
-
- # provide support for initramfs
- ln -s ${systemd_unitdir}/systemd ${D}/init
-
- # create dir for journal
- install -d ${D}${localstatedir}/log/journal
- # udevd is needed in initramfs which was provided by udev in OE-Core
- # so we need to provide that otherwise it pulls in both systemd and
- # udev
- ln -s ${systemd_unitdir}/systemd-udevd ${D}${base_sbindir}/udevd
- # create machine-id
- # 20:12 < mezcalero> koen: you have three options: a) run systemd-machine-id-setup at install time, b) have / read-only and an empty file there (for stateless) and c) boot with / writable
- touch ${D}${sysconfdir}/machine-id
-
- install -m 0644 ${WORKDIR}/*.rules ${D}${sysconfdir}/udev/rules.d/
-
- install -m 0644 ${WORKDIR}/var-run.conf ${D}${sysconfdir}/tmpfiles.d/
-}
-
-python populate_packages_prepend (){
- systemdlibdir = d.getVar("base_libdir", True)
- do_split_packages(d, systemdlibdir, '^lib(.*)\.so\.*', 'lib%s', 'Systemd %s library', extra_depends='', allow_links=True)
-}
-PACKAGES_DYNAMIC += "^lib(udev|gudev|systemd).*"
-
-PACKAGES =+ "${PN}-gui ${PN}-vconsole-setup ${PN}-initramfs ${PN}-analyze python-${PN}-journal"
-
-USERADD_PACKAGES = "${PN}"
-GROUPADD_PARAM_${PN} = "-r lock"
-
-FILES_${PN}-analyze = "${bindir}/systemd-analyze"
-RDEPENDS_${PN}-analyze = "python-dbus python-argparse python-textutils"
-RRECOMMENDS_${PN}-analyze = "python-pycairo"
-
-FILES_python-${PN}-journal = "${PYTHON_SITEPACKAGES_DIR}/systemd/*.py* ${PYTHON_SITEPACKAGES_DIR}/systemd/*.so"
-RDEPENDS_python-${PN}-journal = "python-core"
-
-FILES_${PN}-initramfs = "/init"
-RDEPENDS_${PN}-initramfs = "${PN}"
-
-FILES_${PN}-gui = "${bindir}/systemadm"
-
-FILES_${PN}-vconsole-setup = "${systemd_unitdir}/systemd-vconsole-setup \
- ${systemd_unitdir}/system/systemd-vconsole-setup.service \
- ${systemd_unitdir}/system/sysinit.target.wants/systemd-vconsole-setup.service"
-
-RRECOMMENDS_${PN}-vconsole-setup = "kbd kbd-consolefonts"
-
-CONFFILES_${PN} = "${sysconfdir}/systemd/journald.conf \
- ${sysconfdir}/systemd/logind.conf \
- ${sysconfdir}/systemd/system.conf \
- ${sysconfdir}/systemd/user.conf"
-
-FILES_${PN} = " ${base_bindir}/* \
- ${datadir}/dbus-1/services \
- ${datadir}/dbus-1/system-services \
- ${datadir}/polkit-1 \
- ${datadir}/${PN} \
- ${sysconfdir}/bash_completion.d/ \
- ${sysconfdir}/binfmt.d/ \
- ${sysconfdir}/dbus-1/ \
- ${sysconfdir}/machine-id \
- ${sysconfdir}/modules-load.d/ \
- ${sysconfdir}/sysctl.d/ \
- ${sysconfdir}/systemd/ \
- ${sysconfdir}/tmpfiles.d/ \
- ${sysconfdir}/xdg/ \
- ${sysconfdir}/init.d/README \
- ${systemd_unitdir}/* \
- ${systemd_unitdir}/system/* \
- /lib/udev/rules.d/99-systemd.rules \
- ${base_libdir}/security/*.so \
- /cgroup \
- ${bindir}/systemd* \
- ${bindir}/localectl \
- ${bindir}/hostnamectl \
- ${bindir}/timedatectl \
- ${exec_prefix}/lib/tmpfiles.d/*.conf \
- ${exec_prefix}/lib/systemd \
- ${exec_prefix}/lib/binfmt.d \
- ${exec_prefix}/lib/modules-load.d \
- ${exec_prefix}/lib/sysctl.d \
- ${localstatedir} \
- ${libexecdir} \
- /lib/udev/rules.d/70-uaccess.rules \
- /lib/udev/rules.d/71-seat.rules \
- /lib/udev/rules.d/73-seat-late.rules \
- /lib/udev/rules.d/99-systemd.rules \
- "
-FILES_${PN}-dbg += "${systemd_unitdir}/.debug ${systemd_unitdir}/*/.debug ${base_libdir}/security/.debug/ ${PYTHON_SITEPACKAGES_DIR}/systemd/.debug/"
-FILES_${PN}-dev += "${base_libdir}/security/*.la ${datadir}/dbus-1/interfaces/ ${sysconfdir}/rpm/macros.systemd ${PYTHON_SITEPACKAGES_DIR}/systemd/*.la"
-
-RDEPENDS_${PN} += "udev-systemd"
-
-# kbd -> loadkeys,setfont
-# systemd calls 'modprobe -sab --', which busybox doesn't support due to lack
-# of blacklist support, so use proper modprobe from module-init-tools
-# And pull in the kernel modules mentioned in INSTALL
-# swapon -p is also not supported by busybox
-# busybox mount is broken
-RRECOMMENDS_${PN} += "systemd-serialgetty \
- util-linux-agetty \
- util-linux-swaponoff \
- util-linux-fsck e2fsprogs-e2fsck \
- module-init-tools \
- util-linux-mount util-linux-umount \
- kernel-module-autofs4 kernel-module-unix kernel-module-ipv6 \
-"
-
-PACKAGES =+ "udev-dbg udev udev-consolekit udev-utils udev-systemd"
-
-FILES_udev-dbg += "/lib/udev/.debug"
-
-RDEPENDS_udev += "udev-utils"
-RPROVIDES_udev = "hotplug"
-
-FILES_udev += "${base_sbindir}/udevd \
- /lib/udev/udevd \
- /lib/systemd/systemd-udevd \
- /lib/udev/accelerometer \
- /lib/udev/ata_id \
- /lib/udev/cdrom_id \
- /lib/udev/collect \
- /lib/udev/findkeyboards \
- /lib/udev/keyboard-force-release.sh \
- /lib/udev/keymap \
- /lib/udev/mtd_probe \
- /lib/udev/scsi_id \
- /lib/udev/v4l_id \
- /lib/udev/keymaps \
- /lib/udev/rules.d/4*.rules \
- /lib/udev/rules.d/5*.rules \
- /lib/udev/rules.d/6*.rules \
- /lib/udev/rules.d/70-power-switch.rules \
- /lib/udev/rules.d/75*.rules \
- /lib/udev/rules.d/78*.rules \
- /lib/udev/rules.d/8*.rules \
- /lib/udev/rules.d/95*.rules \
- /lib/udev/hwdb.d \
- ${sysconfdir}/udev \
- "
-
-FILES_udev-consolekit += "/lib/ConsoleKit"
-RDEPENDS_udev-consolekit += "${@base_contains('DISTRO_FEATURES', 'x11', 'consolekit', '', d)}"
-
-FILES_udev-utils = "${bindir}/udevadm"
-
-FILES_udev-systemd = "${systemd_unitdir}/system/*udev* ${systemd_unitdir}/system/*.wants/*udev*"
-RDEPENDS_udev-systemd = "udev"
-
-# TODO:
-# u-a for runlevel and telinit
-
-pkg_postinst_systemd () {
-update-alternatives --install ${base_sbindir}/init init ${systemd_unitdir}/systemd 300
-update-alternatives --install ${base_sbindir}/halt halt ${base_bindir}/systemctl 300
-update-alternatives --install ${base_sbindir}/reboot reboot ${base_bindir}/systemctl 300
-update-alternatives --install ${base_sbindir}/shutdown shutdown ${base_bindir}/systemctl 300
-update-alternatives --install ${base_sbindir}/poweroff poweroff ${base_bindir}/systemctl 300
-}
-
-pkg_prerm_systemd () {
-update-alternatives --remove init ${systemd_unitdir}/systemd
-update-alternatives --remove halt ${base_bindir}/systemctl
-update-alternatives --remove reboot ${base_bindir}/systemctl
-update-alternatives --remove shutdown ${base_bindir}/systemctl
-update-alternatives --remove poweroff ${base_bindir}/systemctl
-}
--
1.7.6.5
More information about the Openembedded-devel
mailing list