[oe] [meta-systemd/V2 1/4] systemd: remove core recipes - they migrated to oe-core
Martin Jansa
martin.jansa at gmail.com
Mon Jan 28 17:45:30 UTC 2013
On Mon, Jan 28, 2013 at 02:50:29PM +0100, Andreas Müller wrote:
> oe-core moved to systemd 197 so no package feeds should break
In case someone still cares about upgrade paths:
| Collected errors:
| * satisfy_dependencies_for: Cannot satisfy the following dependencies for packagegroup-shr-cli:
| * libsystemd-journal0 (>= v196-105-gdecd634) * libudev1 (>= v196-105-gdecd634) * libudev1 (>= v196-105-gdecd634) * libsystemd-daemon0 (>= v196-105-gdecd634) * libude
v1 (>= v196-105-gdecd634) * libudev1 (>= v196-105-gdecd634) * libudev1 (>= v196-105-gdecd634) * libudev1 (>= v196-105-gdecd634) * libudev1 (>= v196-105-gdecd634) * l
ibudev1 (>= v196-105-gdecd634) * libudev1 (>= v196-105-gdecd634) * libudev1 (>= v196-105-gdecd634) *
| * opkg_install_cmd: Cannot install package packagegroup-shr-cli.
| * satisfy_dependencies_for: Cannot satisfy the following dependencies for packagegroup-shr-minimal-x:
| * libudev1 (>= v196-105-gdecd634) * libudev1 (>= v196-105-gdecd634) * libudev1 (>= v196-105-gdecd634) * libudev1 (>= v196-105-gdecd634) * libudev1 (>= v196-105-
gdecd634) * libudev1 (>= v196-105-gdecd634) *
| * opkg_install_cmd: Cannot install package packagegroup-shr-minimal-x.
| * satisfy_dependencies_for: Cannot satisfy the following dependencies for packagegroup-shr-apps:
| * libudev1 (>= v196-105-gdecd634) *
| * opkg_install_cmd: Cannot install package packagegroup-shr-apps.
| * satisfy_dependencies_for: Cannot satisfy the following dependencies for packagegroup-shr-gtk:
| * libsystemd-login0 (>= v196-105-gdecd634) *
| * opkg_install_cmd: Cannot install package packagegroup-shr-gtk.
I guess that with OEBasicHash + PR service it builds fine because all stalled references
get rebuilt, so only 22 ERRORs are shown when buildhistory is enabled:
ERROR: Package version for package udev-dbg went backwards which would break package feeds from (0:v196-105-gdecd634-r20.0 to 0:197-r1.0)
ERROR: Package version for package udev went backwards which would break package feeds from (0:v196-105-gdecd634-r20.0 to 0:197-r1.0)
ERROR: Package version for package udev-consolekit went backwards which would break package feeds from (0:v196-105-gdecd634-r20.0 to 0:197-r1.0)
ERROR: Package version for package udev-utils went backwards which would break package feeds from (0:v196-105-gdecd634-r20.0 to 0:197-r1.0)
ERROR: Package version for package udev-systemd went backwards which would break package feeds from (0:v196-105-gdecd634-r20.0 to 0:197-r1.0)
ERROR: Package version for package systemd-gui went backwards which would break package feeds from (0:v196-105-gdecd634-r20.0 to 0:197-r1.0)
ERROR: Package version for package systemd-vconsole-setup went backwards which would break package feeds from (0:v196-105-gdecd634-r20.0 to 0:197-r1.0)
ERROR: Package version for package systemd-initramfs went backwards which would break package feeds from (0:v196-105-gdecd634-r20.0 to 0:197-r1.0)
ERROR: Package version for package systemd-analyze went backwards which would break package feeds from (0:v196-105-gdecd634-r20.0 to 0:197-r1.0)
ERROR: Package version for package systemd-dbg went backwards which would break package feeds from (0:v196-105-gdecd634-r20.0 to 0:197-r1.0)
ERROR: Package version for package systemd-staticdev went backwards which would break package feeds from (0:v196-105-gdecd634-r20.0 to 0:197-r1.0)
ERROR: Package version for package systemd-dev went backwards which would break package feeds from (0:v196-105-gdecd634-r20.0 to 0:197-r1.0)
ERROR: Package version for package systemd-doc went backwards which would break package feeds from (0:v196-105-gdecd634-r20.0 to 0:197-r1.0)
ERROR: Package version for package systemd-locale went backwards which would break package feeds from (0:v196-105-gdecd634-r20.0 to 0:197-r1.0)
ERROR: Package version for package systemd went backwards which would break package feeds from (0:v196-105-gdecd634-r20.0 to 0:197-r1.0)
ERROR: Package version for package libgudev-1.0 went backwards which would break package feeds from (0:v196-105-gdecd634-r20.0 to 0:197-r1.0)
ERROR: Package version for package libsystemd-daemon went backwards which would break package feeds from (0:v196-105-gdecd634-r20.0 to 0:197-r1.0)
ERROR: Package version for package libsystemd-id128 went backwards which would break package feeds from (0:v196-105-gdecd634-r20.0 to 0:197-r1.0)
ERROR: Package version for package libsystemd-journal went backwards which would break package feeds from (0:v196-105-gdecd634-r20.0 to 0:197-r1.0)
ERROR: Package version for package libsystemd-login went backwards which would break package feeds from (0:v196-105-gdecd634-r20.0 to 0:197-r1.0)
ERROR: Package version for package libudev went backwards which would break package feeds from (0:v196-105-gdecd634-r20.0 to 0:197-r1.0)
I don't care about upgrade paths anymore so much (because official builder will use
danny until next release), but I'll propose PE bump in oe-core.
Cheers,
> Signed-off-by: Andreas Müller <schnitzeltony at googlemail.com>
> ---
> .../recipes-core/systemd/systemd-compat-units.bb | 59 ----
> .../systemd/systemd-compat-units/machineid.service | 16 -
> .../systemd-compat-units/run-postinsts.service | 17 -
> .../recipes-core/systemd/systemd-serialgetty.bb | 46 ---
> .../systemd/systemd-serialgetty/LICENSE | 339 --------------------
> .../systemd-serialgetty/serial-getty at .service | 32 --
> .../systemd/systemd-systemctl-native.bb | 18 -
> .../systemd/systemd-systemctl-native/systemctl | 126 --------
> ...emd-analyze-use-argparse-instead-of-getop.patch | 103 ------
> ...-analyze-use-GDBus-instead-of-dbus-python.patch | 91 ------
> .../recipes-core/systemd/systemd/gtk-doc.make | 230 -------------
> .../recipes-core/systemd/systemd/modprobe.rules | 17 -
> .../systemd/systemd/optional_secure_getenv.patch | 19 --
> .../systemd-pam-configure-check-uclibc.patch | 26 --
> .../systemd/systemd/systemd-pam-fix-execvpe.patch | 26 --
> .../systemd/systemd-pam-fix-fallocate.patch | 82 -----
> .../systemd/systemd-pam-fix-getty-unit.patch | 35 --
> .../systemd/systemd/systemd-pam-fix-mkostemp.patch | 166 ----------
> .../systemd/systemd/systemd-pam-fix-msformat.patch | 335 -------------------
> .../recipes-core/systemd/systemd/touchscreen.rules | 18 -
> .../recipes-core/systemd/systemd/var-run.conf | 4 -
> meta-systemd/recipes-core/systemd/systemd_git.bb | 263 ---------------
> 22 files changed, 0 insertions(+), 2068 deletions(-)
> delete mode 100644 meta-systemd/recipes-core/systemd/systemd-compat-units.bb
> delete mode 100644 meta-systemd/recipes-core/systemd/systemd-compat-units/machineid.service
> delete mode 100644 meta-systemd/recipes-core/systemd/systemd-compat-units/run-postinsts.service
> delete mode 100644 meta-systemd/recipes-core/systemd/systemd-serialgetty.bb
> delete mode 100644 meta-systemd/recipes-core/systemd/systemd-serialgetty/LICENSE
> delete mode 100644 meta-systemd/recipes-core/systemd/systemd-serialgetty/serial-getty at .service
> delete mode 100644 meta-systemd/recipes-core/systemd/systemd-systemctl-native.bb
> delete mode 100755 meta-systemd/recipes-core/systemd/systemd-systemctl-native/systemctl
> delete mode 100644 meta-systemd/recipes-core/systemd/systemd/0001-Revert-systemd-analyze-use-argparse-instead-of-getop.patch
> delete mode 100644 meta-systemd/recipes-core/systemd/systemd/0002-Revert-analyze-use-GDBus-instead-of-dbus-python.patch
> delete mode 100644 meta-systemd/recipes-core/systemd/systemd/gtk-doc.make
> delete mode 100644 meta-systemd/recipes-core/systemd/systemd/modprobe.rules
> delete mode 100644 meta-systemd/recipes-core/systemd/systemd/optional_secure_getenv.patch
> delete mode 100644 meta-systemd/recipes-core/systemd/systemd/systemd-pam-configure-check-uclibc.patch
> delete mode 100644 meta-systemd/recipes-core/systemd/systemd/systemd-pam-fix-execvpe.patch
> delete mode 100644 meta-systemd/recipes-core/systemd/systemd/systemd-pam-fix-fallocate.patch
> delete mode 100644 meta-systemd/recipes-core/systemd/systemd/systemd-pam-fix-getty-unit.patch
> delete mode 100644 meta-systemd/recipes-core/systemd/systemd/systemd-pam-fix-mkostemp.patch
> delete mode 100644 meta-systemd/recipes-core/systemd/systemd/systemd-pam-fix-msformat.patch
> delete mode 100644 meta-systemd/recipes-core/systemd/systemd/touchscreen.rules
> delete mode 100644 meta-systemd/recipes-core/systemd/systemd/var-run.conf
> delete mode 100644 meta-systemd/recipes-core/systemd/systemd_git.bb
>
> diff --git a/meta-systemd/recipes-core/systemd/systemd-compat-units.bb b/meta-systemd/recipes-core/systemd/systemd-compat-units.bb
> deleted file mode 100644
> index 6b6b4dd..0000000
> --- a/meta-systemd/recipes-core/systemd/systemd-compat-units.bb
> +++ /dev/null
> @@ -1,59 +0,0 @@
> -DESCRIPTION = "Units to make systemd work better with existing sysvinit scripts"
> -
> -LICENSE = "MIT"
> -LIC_FILES_CHKSUM = "file://${COREBASE}/LICENSE;md5=3f40d7994397109285ec7b81fdeb3b58"
> -
> -PR = "r18"
> -
> -inherit allarch
> -
> -SRC_URI = "file://*.service"
> -
> -do_install() {
> - install -d ${D}${systemd_unitdir}/system/basic.target.wants
> - install -d ${D}${systemd_unitdir}/system/sysinit.target.wants/
> - install -m 0644 ${WORKDIR}/run-postinsts.service ${D}${systemd_unitdir}/system
> - ln -sf ../run-postinsts.service ${D}${systemd_unitdir}/system/basic.target.wants/
> - ln -sf ../run-postinsts.service ${D}${systemd_unitdir}/system/sysinit.target.wants/
> -
> - install -m 0644 ${WORKDIR}/machineid.service ${D}${systemd_unitdir}/system
> - ln -sf ../machineid.service ${D}${systemd_unitdir}/system/sysinit.target.wants/
> - ln -sf ../machineid.service ${D}${systemd_unitdir}/system/basic.target.wants/
> -
> - # hack to make old style sysvinit postinsts succeed
> - install -d ${D}${bindir}
> - echo "echo 1" > ${D}${bindir}/runlevel
> - chmod 0755 ${D}${bindir}/runlevel
> -}
> -
> -SYSTEMD_DISABLED_SYSV_SERVICES = " \
> - busybox-udhcpc \
> - dnsmasq \
> - hwclock \
> - networking \
> - syslog \
> - syslog.busybox \
> -"
> -
> -pkg_postinst_${PN} () {
> -cd $D${sysconfdir}/init.d
> -
> -echo "Disabling the following sysv scripts: "
> -
> -OPTS=""
> -
> -if [ -n "$D" ]; then
> - OPTS="--root=$D"
> -fi
> -
> -for i in ${SYSTEMD_DISABLED_SYSV_SERVICES} ; do
> - if [ \( -e $i -o $i.sh \) -a ! -e $D${sysconfdir}/systemd/system/$i.service ] ; then
> - echo -n "$i: " ; systemctl ${OPTS} mask $i.service
> - fi
> -done ; echo
> -}
> -
> -FILES_${PN} = "${systemd_unitdir}/system ${bindir}"
> -RDPEPENDS_${PN} = "systemd"
> -
> -
> diff --git a/meta-systemd/recipes-core/systemd/systemd-compat-units/machineid.service b/meta-systemd/recipes-core/systemd/systemd-compat-units/machineid.service
> deleted file mode 100644
> index cab8f76..0000000
> --- a/meta-systemd/recipes-core/systemd/systemd-compat-units/machineid.service
> +++ /dev/null
> @@ -1,16 +0,0 @@
> -[Unit]
> -Description=Machine ID first boot configure
> -DefaultDependencies=no
> -ConditionPathExists=|!/etc/machine-id
> -After=remount-rootfs.service
> -Before=sysinit.target
> -
> -[Service]
> -ExecStart=/bin/systemd-machine-id-setup
> -RemainAfterExit=No
> -Type=oneshot
> -StandardOutput=syslog
> -
> -[Install]
> -WantedBy=basic.target
> -WantedBy=sysinit.target
> diff --git a/meta-systemd/recipes-core/systemd/systemd-compat-units/run-postinsts.service b/meta-systemd/recipes-core/systemd/systemd-compat-units/run-postinsts.service
> deleted file mode 100644
> index da6fe76..0000000
> --- a/meta-systemd/recipes-core/systemd/systemd-compat-units/run-postinsts.service
> +++ /dev/null
> @@ -1,17 +0,0 @@
> -[Unit]
> -Description=Run pending postinsts
> -DefaultDependencies=no
> -ConditionPathExists=|/etc/rcS.d/S98run-postinsts
> -After=remount-rootfs.service tmp.mount
> -Before=sysinit.target
> -
> -[Service]
> -ExecStart=/etc/rcS.d/S98run-postinsts
> -RemainAfterExit=No
> -Type=oneshot
> -StandardOutput=syslog
> -TimeoutSec=0
> -
> -[Install]
> -WantedBy=basic.target
> -WantedBy=sysinit.target
> diff --git a/meta-systemd/recipes-core/systemd/systemd-serialgetty.bb b/meta-systemd/recipes-core/systemd/systemd-serialgetty.bb
> deleted file mode 100644
> index c310672..0000000
> --- a/meta-systemd/recipes-core/systemd/systemd-serialgetty.bb
> +++ /dev/null
> @@ -1,46 +0,0 @@
> -DESCRIPTION = "Systemd serial config"
> -LICENSE = "GPLv2+"
> -LIC_FILES_CHKSUM = "file://${WORKDIR}/LICENSE;md5=751419260aa954499f7abaabaa882bbe"
> -
> -PR = "r3"
> -
> -SERIAL_CONSOLE ?= "115200 ttyS0"
> -
> -SRC_URI = "file://LICENSE \
> - file://serial-getty@.service"
> -
> -def get_serial_console_value(d, index):
> - c = d.getVar('SERIAL_CONSOLE', True)
> -
> - if len(c):
> - return c.split()[index]
> -
> - return ""
> -
> -def get_baudrate(d):
> - return get_serial_console_value(d, 0)
> -
> -def get_console(d):
> - return get_serial_console_value(d, 1)
> -
> -do_install() {
> - if [ ! ${@get_baudrate(d)} = "" ]; then
> - sed -i -e s/\@BAUDRATE\@/${@get_baudrate(d)}/g ${WORKDIR}/serial-getty at .service
> - install -d ${D}${systemd_unitdir}/system/
> - install -d ${D}${sysconfdir}/systemd/system/getty.target.wants/
> - install ${WORKDIR}/serial-getty at .service ${D}${systemd_unitdir}/system/
> -
> - # enable the service
> - ln -sf ${systemd_unitdir}/system/serial-getty at .service \
> - ${D}${sysconfdir}/systemd/system/getty.target.wants/serial-getty@${@get_console(d)}.service
> - fi
> -}
> -
> -PACKAGES = "${PN} ${PN}-dbg ${PN}-dev ${PN}-doc"
> -
> -RRECOMMENDS_${PN} = ""
> -RDEPENDS_${PN} = "systemd"
> -
> -# This is a machine specific file
> -FILES_${PN} = "${systemd_unitdir}/system/serial-getty at .service ${sysconfdir}"
> -PACKAGE_ARCH = "${MACHINE_ARCH}"
> diff --git a/meta-systemd/recipes-core/systemd/systemd-serialgetty/LICENSE b/meta-systemd/recipes-core/systemd/systemd-serialgetty/LICENSE
> deleted file mode 100644
> index d511905..0000000
> --- a/meta-systemd/recipes-core/systemd/systemd-serialgetty/LICENSE
> +++ /dev/null
> @@ -1,339 +0,0 @@
> - GNU GENERAL PUBLIC LICENSE
> - Version 2, June 1991
> -
> - Copyright (C) 1989, 1991 Free Software Foundation, Inc.,
> - 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
> - Everyone is permitted to copy and distribute verbatim copies
> - of this license document, but changing it is not allowed.
> -
> - Preamble
> -
> - The licenses for most software are designed to take away your
> -freedom to share and change it. By contrast, the GNU General Public
> -License is intended to guarantee your freedom to share and change free
> -software--to make sure the software is free for all its users. This
> -General Public License applies to most of the Free Software
> -Foundation's software and to any other program whose authors commit to
> -using it. (Some other Free Software Foundation software is covered by
> -the GNU Lesser General Public License instead.) You can apply it to
> -your programs, too.
> -
> - When we speak of free software, we are referring to freedom, not
> -price. Our General Public Licenses are designed to make sure that you
> -have the freedom to distribute copies of free software (and charge for
> -this service if you wish), that you receive source code or can get it
> -if you want it, that you can change the software or use pieces of it
> -in new free programs; and that you know you can do these things.
> -
> - To protect your rights, we need to make restrictions that forbid
> -anyone to deny you these rights or to ask you to surrender the rights.
> -These restrictions translate to certain responsibilities for you if you
> -distribute copies of the software, or if you modify it.
> -
> - For example, if you distribute copies of such a program, whether
> -gratis or for a fee, you must give the recipients all the rights that
> -you have. You must make sure that they, too, receive or can get the
> -source code. And you must show them these terms so they know their
> -rights.
> -
> - We protect your rights with two steps: (1) copyright the software, and
> -(2) offer you this license which gives you legal permission to copy,
> -distribute and/or modify the software.
> -
> - Also, for each author's protection and ours, we want to make certain
> -that everyone understands that there is no warranty for this free
> -software. If the software is modified by someone else and passed on, we
> -want its recipients to know that what they have is not the original, so
> -that any problems introduced by others will not reflect on the original
> -authors' reputations.
> -
> - Finally, any free program is threatened constantly by software
> -patents. We wish to avoid the danger that redistributors of a free
> -program will individually obtain patent licenses, in effect making the
> -program proprietary. To prevent this, we have made it clear that any
> -patent must be licensed for everyone's free use or not licensed at all.
> -
> - The precise terms and conditions for copying, distribution and
> -modification follow.
> -
> - GNU GENERAL PUBLIC LICENSE
> - TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
> -
> - 0. This License applies to any program or other work which contains
> -a notice placed by the copyright holder saying it may be distributed
> -under the terms of this General Public License. The "Program", below,
> -refers to any such program or work, and a "work based on the Program"
> -means either the Program or any derivative work under copyright law:
> -that is to say, a work containing the Program or a portion of it,
> -either verbatim or with modifications and/or translated into another
> -language. (Hereinafter, translation is included without limitation in
> -the term "modification".) Each licensee is addressed as "you".
> -
> -Activities other than copying, distribution and modification are not
> -covered by this License; they are outside its scope. The act of
> -running the Program is not restricted, and the output from the Program
> -is covered only if its contents constitute a work based on the
> -Program (independent of having been made by running the Program).
> -Whether that is true depends on what the Program does.
> -
> - 1. You may copy and distribute verbatim copies of the Program's
> -source code as you receive it, in any medium, provided that you
> -conspicuously and appropriately publish on each copy an appropriate
> -copyright notice and disclaimer of warranty; keep intact all the
> -notices that refer to this License and to the absence of any warranty;
> -and give any other recipients of the Program a copy of this License
> -along with the Program.
> -
> -You may charge a fee for the physical act of transferring a copy, and
> -you may at your option offer warranty protection in exchange for a fee.
> -
> - 2. You may modify your copy or copies of the Program or any portion
> -of it, thus forming a work based on the Program, and copy and
> -distribute such modifications or work under the terms of Section 1
> -above, provided that you also meet all of these conditions:
> -
> - a) You must cause the modified files to carry prominent notices
> - stating that you changed the files and the date of any change.
> -
> - b) You must cause any work that you distribute or publish, that in
> - whole or in part contains or is derived from the Program or any
> - part thereof, to be licensed as a whole at no charge to all third
> - parties under the terms of this License.
> -
> - c) If the modified program normally reads commands interactively
> - when run, you must cause it, when started running for such
> - interactive use in the most ordinary way, to print or display an
> - announcement including an appropriate copyright notice and a
> - notice that there is no warranty (or else, saying that you provide
> - a warranty) and that users may redistribute the program under
> - these conditions, and telling the user how to view a copy of this
> - License. (Exception: if the Program itself is interactive but
> - does not normally print such an announcement, your work based on
> - the Program is not required to print an announcement.)
> -
> -These requirements apply to the modified work as a whole. If
> -identifiable sections of that work are not derived from the Program,
> -and can be reasonably considered independent and separate works in
> -themselves, then this License, and its terms, do not apply to those
> -sections when you distribute them as separate works. But when you
> -distribute the same sections as part of a whole which is a work based
> -on the Program, the distribution of the whole must be on the terms of
> -this License, whose permissions for other licensees extend to the
> -entire whole, and thus to each and every part regardless of who wrote it.
> -
> -Thus, it is not the intent of this section to claim rights or contest
> -your rights to work written entirely by you; rather, the intent is to
> -exercise the right to control the distribution of derivative or
> -collective works based on the Program.
> -
> -In addition, mere aggregation of another work not based on the Program
> -with the Program (or with a work based on the Program) on a volume of
> -a storage or distribution medium does not bring the other work under
> -the scope of this License.
> -
> - 3. You may copy and distribute the Program (or a work based on it,
> -under Section 2) in object code or executable form under the terms of
> -Sections 1 and 2 above provided that you also do one of the following:
> -
> - a) Accompany it with the complete corresponding machine-readable
> - source code, which must be distributed under the terms of Sections
> - 1 and 2 above on a medium customarily used for software interchange; or,
> -
> - b) Accompany it with a written offer, valid for at least three
> - years, to give any third party, for a charge no more than your
> - cost of physically performing source distribution, a complete
> - machine-readable copy of the corresponding source code, to be
> - distributed under the terms of Sections 1 and 2 above on a medium
> - customarily used for software interchange; or,
> -
> - c) Accompany it with the information you received as to the offer
> - to distribute corresponding source code. (This alternative is
> - allowed only for noncommercial distribution and only if you
> - received the program in object code or executable form with such
> - an offer, in accord with Subsection b above.)
> -
> -The source code for a work means the preferred form of the work for
> -making modifications to it. For an executable work, complete source
> -code means all the source code for all modules it contains, plus any
> -associated interface definition files, plus the scripts used to
> -control compilation and installation of the executable. However, as a
> -special exception, the source code distributed need not include
> -anything that is normally distributed (in either source or binary
> -form) with the major components (compiler, kernel, and so on) of the
> -operating system on which the executable runs, unless that component
> -itself accompanies the executable.
> -
> -If distribution of executable or object code is made by offering
> -access to copy from a designated place, then offering equivalent
> -access to copy the source code from the same place counts as
> -distribution of the source code, even though third parties are not
> -compelled to copy the source along with the object code.
> -
> - 4. You may not copy, modify, sublicense, or distribute the Program
> -except as expressly provided under this License. Any attempt
> -otherwise to copy, modify, sublicense or distribute the Program is
> -void, and will automatically terminate your rights under this License.
> -However, parties who have received copies, or rights, from you under
> -this License will not have their licenses terminated so long as such
> -parties remain in full compliance.
> -
> - 5. You are not required to accept this License, since you have not
> -signed it. However, nothing else grants you permission to modify or
> -distribute the Program or its derivative works. These actions are
> -prohibited by law if you do not accept this License. Therefore, by
> -modifying or distributing the Program (or any work based on the
> -Program), you indicate your acceptance of this License to do so, and
> -all its terms and conditions for copying, distributing or modifying
> -the Program or works based on it.
> -
> - 6. Each time you redistribute the Program (or any work based on the
> -Program), the recipient automatically receives a license from the
> -original licensor to copy, distribute or modify the Program subject to
> -these terms and conditions. You may not impose any further
> -restrictions on the recipients' exercise of the rights granted herein.
> -You are not responsible for enforcing compliance by third parties to
> -this License.
> -
> - 7. If, as a consequence of a court judgment or allegation of patent
> -infringement or for any other reason (not limited to patent issues),
> -conditions are imposed on you (whether by court order, agreement or
> -otherwise) that contradict the conditions of this License, they do not
> -excuse you from the conditions of this License. If you cannot
> -distribute so as to satisfy simultaneously your obligations under this
> -License and any other pertinent obligations, then as a consequence you
> -may not distribute the Program at all. For example, if a patent
> -license would not permit royalty-free redistribution of the Program by
> -all those who receive copies directly or indirectly through you, then
> -the only way you could satisfy both it and this License would be to
> -refrain entirely from distribution of the Program.
> -
> -If any portion of this section is held invalid or unenforceable under
> -any particular circumstance, the balance of the section is intended to
> -apply and the section as a whole is intended to apply in other
> -circumstances.
> -
> -It is not the purpose of this section to induce you to infringe any
> -patents or other property right claims or to contest validity of any
> -such claims; this section has the sole purpose of protecting the
> -integrity of the free software distribution system, which is
> -implemented by public license practices. Many people have made
> -generous contributions to the wide range of software distributed
> -through that system in reliance on consistent application of that
> -system; it is up to the author/donor to decide if he or she is willing
> -to distribute software through any other system and a licensee cannot
> -impose that choice.
> -
> -This section is intended to make thoroughly clear what is believed to
> -be a consequence of the rest of this License.
> -
> - 8. If the distribution and/or use of the Program is restricted in
> -certain countries either by patents or by copyrighted interfaces, the
> -original copyright holder who places the Program under this License
> -may add an explicit geographical distribution limitation excluding
> -those countries, so that distribution is permitted only in or among
> -countries not thus excluded. In such case, this License incorporates
> -the limitation as if written in the body of this License.
> -
> - 9. The Free Software Foundation may publish revised and/or new versions
> -of the General Public License from time to time. Such new versions will
> -be similar in spirit to the present version, but may differ in detail to
> -address new problems or concerns.
> -
> -Each version is given a distinguishing version number. If the Program
> -specifies a version number of this License which applies to it and "any
> -later version", you have the option of following the terms and conditions
> -either of that version or of any later version published by the Free
> -Software Foundation. If the Program does not specify a version number of
> -this License, you may choose any version ever published by the Free Software
> -Foundation.
> -
> - 10. If you wish to incorporate parts of the Program into other free
> -programs whose distribution conditions are different, write to the author
> -to ask for permission. For software which is copyrighted by the Free
> -Software Foundation, write to the Free Software Foundation; we sometimes
> -make exceptions for this. Our decision will be guided by the two goals
> -of preserving the free status of all derivatives of our free software and
> -of promoting the sharing and reuse of software generally.
> -
> - NO WARRANTY
> -
> - 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
> -FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
> -OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
> -PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
> -OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
> -MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
> -TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
> -PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
> -REPAIR OR CORRECTION.
> -
> - 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
> -WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
> -REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
> -INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
> -OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
> -TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
> -YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
> -PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
> -POSSIBILITY OF SUCH DAMAGES.
> -
> - END OF TERMS AND CONDITIONS
> -
> - How to Apply These Terms to Your New Programs
> -
> - If you develop a new program, and you want it to be of the greatest
> -possible use to the public, the best way to achieve this is to make it
> -free software which everyone can redistribute and change under these terms.
> -
> - To do so, attach the following notices to the program. It is safest
> -to attach them to the start of each source file to most effectively
> -convey the exclusion of warranty; and each file should have at least
> -the "copyright" line and a pointer to where the full notice is found.
> -
> - <one line to give the program's name and a brief idea of what it does.>
> - Copyright (C) <year> <name of author>
> -
> - This program is free software; you can redistribute it and/or modify
> - it under the terms of the GNU General Public License as published by
> - the Free Software Foundation; either version 2 of the License, or
> - (at your option) any later version.
> -
> - This program is distributed in the hope that it will be useful,
> - but WITHOUT ANY WARRANTY; without even the implied warranty of
> - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> - GNU General Public License for more details.
> -
> - You should have received a copy of the GNU General Public License along
> - with this program; if not, write to the Free Software Foundation, Inc.,
> - 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
> -
> -Also add information on how to contact you by electronic and paper mail.
> -
> -If the program is interactive, make it output a short notice like this
> -when it starts in an interactive mode:
> -
> - Gnomovision version 69, Copyright (C) year name of author
> - Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
> - This is free software, and you are welcome to redistribute it
> - under certain conditions; type `show c' for details.
> -
> -The hypothetical commands `show w' and `show c' should show the appropriate
> -parts of the General Public License. Of course, the commands you use may
> -be called something other than `show w' and `show c'; they could even be
> -mouse-clicks or menu items--whatever suits your program.
> -
> -You should also get your employer (if you work as a programmer) or your
> -school, if any, to sign a "copyright disclaimer" for the program, if
> -necessary. Here is a sample; alter the names:
> -
> - Yoyodyne, Inc., hereby disclaims all copyright interest in the program
> - `Gnomovision' (which makes passes at compilers) written by James Hacker.
> -
> - <signature of Ty Coon>, 1 April 1989
> - Ty Coon, President of Vice
> -
> -This General Public License does not permit incorporating your program into
> -proprietary programs. If your program is a subroutine library, you may
> -consider it more useful to permit linking proprietary applications with the
> -library. If this is what you want to do, use the GNU Lesser General
> -Public License instead of this License.
> diff --git a/meta-systemd/recipes-core/systemd/systemd-serialgetty/serial-getty at .service b/meta-systemd/recipes-core/systemd/systemd-serialgetty/serial-getty at .service
> deleted file mode 100644
> index 8eeaab6..0000000
> --- a/meta-systemd/recipes-core/systemd/systemd-serialgetty/serial-getty at .service
> +++ /dev/null
> @@ -1,32 +0,0 @@
> -# This file is part of systemd.
> -#
> -# systemd is free software; you can redistribute it and/or modify it
> -# under the terms of the GNU General Public License as published by
> -# the Free Software Foundation; either version 2 of the License, or
> -# (at your option) any later version.
> -
> -[Unit]
> -Description=Serial Getty on %I
> -BindTo=dev-%i.device
> -After=dev-%i.device systemd-user-sessions.service
> -
> -# If additional gettys are spawned during boot then we should make
> -# sure that this is synchronized before getty.target, even though
> -# getty.target didn't actually pull it in.
> -Before=getty.target
> -
> -[Service]
> -Environment=TERM=vt100
> -ExecStart=-/sbin/agetty -s %I @BAUDRATE@
> -Restart=always
> -RestartSec=0
> -UtmpIdentifier=%I
> -TTYPath=/dev/%I
> -TTYReset=yes
> -TTYVHangup=yes
> -KillMode=process
> -IgnoreSIGPIPE=no
> -
> -# Some login implementations ignore SIGTERM, so we send SIGHUP
> -# instead, to ensure that login terminates cleanly.
> -KillSignal=SIGHUP
> diff --git a/meta-systemd/recipes-core/systemd/systemd-systemctl-native.bb b/meta-systemd/recipes-core/systemd/systemd-systemctl-native.bb
> deleted file mode 100644
> index c9c3317..0000000
> --- a/meta-systemd/recipes-core/systemd/systemd-systemctl-native.bb
> +++ /dev/null
> @@ -1,18 +0,0 @@
> -DESCRIPTION = "Wrapper to enable of systemd services"
> -
> -LICENSE = "MIT"
> -LIC_FILES_CHKSUM = "file://${COREBASE}/LICENSE;md5=3f40d7994397109285ec7b81fdeb3b58"
> -
> -PR = "r7"
> -
> -inherit native
> -
> -# BPN is not enough in this case
> -FILESPATH = "${FILE_DIRNAME}/${PN}/"
> -
> -SRC_URI = "file://systemctl"
> -
> -do_install() {
> - install -d ${D}${bindir}
> - install -m 0755 ${WORKDIR}/systemctl ${D}${bindir}
> -}
> diff --git a/meta-systemd/recipes-core/systemd/systemd-systemctl-native/systemctl b/meta-systemd/recipes-core/systemd/systemd-systemctl-native/systemctl
> deleted file mode 100755
> index d71c7ed..0000000
> --- a/meta-systemd/recipes-core/systemd/systemd-systemctl-native/systemctl
> +++ /dev/null
> @@ -1,126 +0,0 @@
> -#!/bin/sh
> -echo "Started $0 $*"
> -
> -ROOT=
> -
> -# parse command line params
> -action=
> -while [ $# != 0 ]; do
> - opt="$1"
> -
> - case "$opt" in
> - enable)
> - shift
> -
> - action="$opt"
> - services="$1"
> - cmd_args="1"
> - shift
> - ;;
> - disable)
> - shift
> -
> - action="$opt"
> - services="$1"
> - cmd_args="1"
> - shift
> - ;;
> - mask)
> - shift
> -
> - action="$opt"
> - services="$1"
> - cmd_args="1"
> - shift
> - ;;
> - --root=*)
> - ROOT=${opt##--root=}
> - cmd_args="0"
> - shift
> - ;;
> - *)
> - if [ "$cmd_args" = "1" ]; then
> - services="$services $opt"
> - shift
> - else
> - echo "'$opt' is an unkown option; exiting with error"
> - exit 1
> - fi
> - ;;
> - esac
> -done
> -
> -for service in $services; do
> - if [ "$action" = "mask" ]; then
> - if [ ! -d $ROOT/etc/systemd/system/ ]; then
> - mkdir -p $ROOT/etc/systemd/system/
> - fi
> - cmd="ln -s /dev/null $ROOT/etc/systemd/system/$service"
> - echo "$cmd"
> - $cmd
> - exit 0
> - fi
> -
> - echo "Try to find location of $service..."
> - # find service file
> - for p in $ROOT/etc/systemd/system \
> - $ROOT/lib/systemd/system \
> - $ROOT/usr/lib/systemd/system; do
> - if [ -e $p/$service ]; then
> - service_file=$p/$service
> - service_file=${service_file##$ROOT}
> - fi
> - done
> - if [ -z "$service_file" ]; then
> - echo "'$service' couldn't be found; exiting with error"
> - exit 1
> - fi
> - echo "Found $service in $service_file"
> -
> - # create the required symbolic links
> - wanted_by=$(grep WantedBy $ROOT/$service_file \
> - | sed 's,WantedBy=,,g' \
> - | tr ',' '\n' \
> - | grep '\(\.target$\)\|\(\.service$\)')
> -
> - for r in $wanted_by; do
> - echo "WantedBy=$r found in $service"
> - if [ "$action" = "enable" ]; then
> - mkdir -p $ROOT/etc/systemd/system/$r.wants
> - ln -s $service_file $ROOT/etc/systemd/system/$r.wants
> - echo "Enabled $service for $wanted_by."
> - else
> - rm -f $ROOT/etc/systemd/system/$r.wants/$service
> - rmdir --ignore-fail-on-non-empty -p $ROOT/etc/systemd/system/$r.wants
> - echo "Disabled $service for $wanted_by."
> - fi
> - done
> -
> - # create the required symbolic 'Alias' links
> - alias=$(grep Alias $ROOT/$service_file \
> - | sed 's,Alias=,,g' \
> - | tr ',' '\n' \
> - | grep '\.service$')
> -
> - for r in $alias; do
> - if [ "$action" = "enable" ]; then
> - mkdir -p $ROOT/etc/systemd/system
> - ln -s $service_file $ROOT/etc/systemd/system/$r
> - echo "Enabled $service for $alias."
> - else
> - rm -f $ROOT/etc/systemd/system/$r
> - echo "Disabled $service for $alias."
> - fi
> - done
> -
> - # call us for the other required scripts
> - also=$(grep Also $ROOT/$service_file \
> - | sed 's,Also=,,g' \
> - | tr ',' '\n')
> - for a in $also; do
> - echo "Also=$a found in $service"
> - if [ "$action" = "enable" ]; then
> - $0 --root=$ROOT enable $a
> - fi
> - done
> -done
> diff --git a/meta-systemd/recipes-core/systemd/systemd/0001-Revert-systemd-analyze-use-argparse-instead-of-getop.patch b/meta-systemd/recipes-core/systemd/systemd/0001-Revert-systemd-analyze-use-argparse-instead-of-getop.patch
> deleted file mode 100644
> index 7de2705..0000000
> --- a/meta-systemd/recipes-core/systemd/systemd/0001-Revert-systemd-analyze-use-argparse-instead-of-getop.patch
> +++ /dev/null
> @@ -1,103 +0,0 @@
> -From 2003e63f48cee2f497de7b90b66284f98c1c9919 Mon Sep 17 00:00:00 2001
> -From: Koen Kooi <koen at dominion.thruhere.net>
> -Date: Mon, 10 Dec 2012 12:24:32 +0100
> -Subject: [PATCH 1/2] Revert "systemd-analyze: use argparse instead of getopt"
> -
> -This reverts commit 0c0271841ab45595f71528c50bcf1904d4b841d5.
> -
> -Argparse is broken in current OE python
> ----
> - src/analyze/systemd-analyze | 60 ++++++++++++++++++++++++++++---------------
> - 1 files changed, 39 insertions(+), 21 deletions(-)
> -
> -diff --git a/src/analyze/systemd-analyze b/src/analyze/systemd-analyze
> -index 88699d6..87a83dd 100755
> ---- a/src/analyze/systemd-analyze
> -+++ b/src/analyze/systemd-analyze
> -@@ -1,7 +1,6 @@
> - #!/usr/bin/python
> -
> --import sys, os
> --import argparse
> -+import getopt, sys, os
> - from gi.repository import Gio
> - try:
> - import cairo
> -@@ -76,6 +75,20 @@ def draw_text(context, x, y, text, size = 12, r = 0, g = 0, b = 0, vcenter = 0.5
> -
> - context.restore()
> -
> -+def usage():
> -+ sys.stdout.write("""systemd-analyze [--user] time
> -+systemd-analyze [--user] blame
> -+systemd-analyze [--user] plot
> -+
> -+Process systemd profiling information
> -+
> -+ -h --help Show this help
> -+""")
> -+
> -+def help():
> -+ usage()
> -+ sys.exit()
> -+
> - def time():
> -
> - initrd_time, start_time, finish_time = acquire_start_time()
> -@@ -266,29 +279,34 @@ def plot():
> -
> - surface.finish()
> -
> --parser = argparse.ArgumentParser(formatter_class=argparse.RawDescriptionHelpFormatter,
> -- description='Process systemd profiling information',
> -- epilog='''\
> --time - print time spent in the kernel before reaching userspace
> --blame - print list of running units ordered by time to init
> --plot - output SVG graphic showing service initialization
> --''')
> --
> --parser.add_argument('action', choices=('time', 'blame', 'plot'),
> -- default='time', nargs='?',
> -- help='action to perform (default: time)')
> --parser.add_argument('--user', action='store_true',
> -- help='use the session bus')
> -+def unknown_verb():
> -+ sys.stderr.write("Unknown verb '%s'.\n" % args[0])
> -+ usage()
> -+ sys.exit(1)
> -
> --args = parser.parse_args()
> -+bus = Gio.BusType.SYSTEM
> -
> --if args.user:
> -- bus = Gio.BusType.SESSION
> --else:
> -- bus = Gio.BusType.SYSTEM
> -+try:
> -+ opts, args = getopt.gnu_getopt(sys.argv[1:], "h", ["help", "user"])
> -+except getopt.GetoptError as err:
> -+ sys.stdout.write(str(err) + "\n")
> -+ usage()
> -+ sys.exit(2)
> -+for o, a in opts:
> -+ if o in ("-h", "--help"):
> -+ help()
> -+ elif o == '--user':
> -+ bus = Gio.BusType.SESSION
> -+ else:
> -+ assert False, "unhandled option"
> -
> - verb = {'time' : time,
> - 'blame': blame,
> - 'plot' : plot,
> -+ 'help' : help,
> - }
> --verb.get(args.action)()
> -+
> -+if len(args) == 0:
> -+ time()
> -+else:
> -+ verb.get(args[0], unknown_verb)()
> ---
> -1.7.7.6
> -
> diff --git a/meta-systemd/recipes-core/systemd/systemd/0002-Revert-analyze-use-GDBus-instead-of-dbus-python.patch b/meta-systemd/recipes-core/systemd/systemd/0002-Revert-analyze-use-GDBus-instead-of-dbus-python.patch
> deleted file mode 100644
> index e5e8d7d..0000000
> --- a/meta-systemd/recipes-core/systemd/systemd/0002-Revert-analyze-use-GDBus-instead-of-dbus-python.patch
> +++ /dev/null
> @@ -1,91 +0,0 @@
> -From 8079db861b8ffdce69fa10a9ab9ef4740045187f Mon Sep 17 00:00:00 2001
> -From: Koen Kooi <koen at dominion.thruhere.net>
> -Date: Mon, 10 Dec 2012 12:25:00 +0100
> -Subject: [PATCH 2/2] Revert "analyze: use GDBus instead of dbus-python"
> -
> -This reverts commit 4940c64240541e91411620b7dc0963e012aa6b91.
> -
> -Python-gobject is too old in current OE
> ----
> - src/analyze/systemd-analyze | 31 ++++++++++++++-----------------
> - 1 files changed, 14 insertions(+), 17 deletions(-)
> -
> -diff --git a/src/analyze/systemd-analyze b/src/analyze/systemd-analyze
> -index 87a83dd..636fd74 100755
> ---- a/src/analyze/systemd-analyze
> -+++ b/src/analyze/systemd-analyze
> -@@ -1,15 +1,14 @@
> - #!/usr/bin/python
> -
> --import getopt, sys, os
> --from gi.repository import Gio
> -+import getopt, dbus, sys, os
> - try:
> - import cairo
> - except ImportError:
> - cairo = None
> -
> - def acquire_time_data():
> -- manager = Gio.DBusProxy.new_for_bus_sync(bus, Gio.DBusProxyFlags.NONE,
> -- None, 'org.freedesktop.systemd1', '/org/freedesktop/systemd1', 'org.freedesktop.systemd1.Manager', None)
> -+
> -+ manager = dbus.Interface(bus.get_object('org.freedesktop.systemd1', '/org/freedesktop/systemd1'), 'org.freedesktop.systemd1.Manager')
> - units = manager.ListUnits()
> -
> - l = []
> -@@ -18,25 +17,23 @@ def acquire_time_data():
> - if i[5] != "":
> - continue
> -
> -- properties = Gio.DBusProxy.new_for_bus_sync(bus, Gio.DBusProxyFlags.NONE,
> -- None, 'org.freedesktop.systemd1', i[6], 'org.freedesktop.DBus.Properties', None)
> -+ properties = dbus.Interface(bus.get_object('org.freedesktop.systemd1', i[6]), 'org.freedesktop.DBus.Properties')
> -
> -- ixt = properties.Get('(ss)', 'org.freedesktop.systemd1.Unit', 'InactiveExitTimestampMonotonic')
> -- aet = properties.Get('(ss)', 'org.freedesktop.systemd1.Unit', 'ActiveEnterTimestampMonotonic')
> -- axt = properties.Get('(ss)', 'org.freedesktop.systemd1.Unit', 'ActiveExitTimestampMonotonic')
> -- iet = properties.Get('(ss)', 'org.freedesktop.systemd1.Unit', 'InactiveEnterTimestampMonotonic')
> -+ ixt = int(properties.Get('org.freedesktop.systemd1.Unit', 'InactiveExitTimestampMonotonic'))
> -+ aet = int(properties.Get('org.freedesktop.systemd1.Unit', 'ActiveEnterTimestampMonotonic'))
> -+ axt = int(properties.Get('org.freedesktop.systemd1.Unit', 'ActiveExitTimestampMonotonic'))
> -+ iet = int(properties.Get('org.freedesktop.systemd1.Unit', 'InactiveEnterTimestampMonotonic'))
> -
> - l.append((str(i[0]), ixt, aet, axt, iet))
> -
> - return l
> -
> - def acquire_start_time():
> -- properties = Gio.DBusProxy.new_for_bus_sync(bus, Gio.DBusProxyFlags.NONE,
> -- None, 'org.freedesktop.systemd1', '/org/freedesktop/systemd1', 'org.freedesktop.DBus.Properties', None)
> -+ properties = dbus.Interface(bus.get_object('org.freedesktop.systemd1', '/org/freedesktop/systemd1'), 'org.freedesktop.DBus.Properties')
> -
> -- initrd_time = properties.Get('(ss)', 'org.freedesktop.systemd1.Manager', 'InitRDTimestampMonotonic')
> -- userspace_time = properties.Get('(ss)', 'org.freedesktop.systemd1.Manager', 'UserspaceTimestampMonotonic')
> -- finish_time = properties.Get('(ss)', 'org.freedesktop.systemd1.Manager', 'FinishTimestampMonotonic')
> -+ initrd_time = int(properties.Get('org.freedesktop.systemd1.Manager', 'InitRDTimestampMonotonic'))
> -+ userspace_time = int(properties.Get('org.freedesktop.systemd1.Manager', 'UserspaceTimestampMonotonic'))
> -+ finish_time = int(properties.Get('org.freedesktop.systemd1.Manager', 'FinishTimestampMonotonic'))
> -
> - if finish_time == 0:
> - sys.stderr.write("Bootup is not yet finished. Please try again later.\n")
> -@@ -284,7 +281,7 @@ def unknown_verb():
> - usage()
> - sys.exit(1)
> -
> --bus = Gio.BusType.SYSTEM
> -+bus = dbus.SystemBus()
> -
> - try:
> - opts, args = getopt.gnu_getopt(sys.argv[1:], "h", ["help", "user"])
> -@@ -296,7 +293,7 @@ for o, a in opts:
> - if o in ("-h", "--help"):
> - help()
> - elif o == '--user':
> -- bus = Gio.BusType.SESSION
> -+ bus = dbus.SessionBus()
> - else:
> - assert False, "unhandled option"
> -
> ---
> -1.7.7.6
> -
> diff --git a/meta-systemd/recipes-core/systemd/systemd/gtk-doc.make b/meta-systemd/recipes-core/systemd/systemd/gtk-doc.make
> deleted file mode 100644
> index 57fab98..0000000
> --- a/meta-systemd/recipes-core/systemd/systemd/gtk-doc.make
> +++ /dev/null
> @@ -1,230 +0,0 @@
> -# -*- mode: makefile -*-
> -
> -####################################
> -# Everything below here is generic #
> -####################################
> -
> -if GTK_DOC_USE_LIBTOOL
> -GTKDOC_CC = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
> -GTKDOC_LD = $(LIBTOOL) --tag=CC --mode=link $(CC) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS)
> -GTKDOC_RUN = $(LIBTOOL) --mode=execute
> -else
> -GTKDOC_CC = $(CC) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
> -GTKDOC_LD = $(CC) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS)
> -GTKDOC_RUN =
> -endif
> -
> -# We set GPATH here; this gives us semantics for GNU make
> -# which are more like other make's VPATH, when it comes to
> -# whether a source that is a target of one rule is then
> -# searched for in VPATH/GPATH.
> -#
> -GPATH = $(srcdir)
> -
> -TARGET_DIR=$(HTML_DIR)/$(DOC_MODULE)
> -
> -EXTRA_DIST = \
> - $(content_files) \
> - $(HTML_IMAGES) \
> - $(DOC_MAIN_SGML_FILE) \
> - $(DOC_MODULE)-sections.txt \
> - $(DOC_MODULE)-overrides.txt
> -
> -DOC_STAMPS=scan-build.stamp tmpl-build.stamp sgml-build.stamp html-build.stamp \
> - pdf-build.stamp \
> - $(srcdir)/tmpl.stamp $(srcdir)/sgml.stamp $(srcdir)/html.stamp \
> - $(srcdir)/pdf.stamp
> -
> -SCANOBJ_FILES = \
> - $(DOC_MODULE).args \
> - $(DOC_MODULE).hierarchy \
> - $(DOC_MODULE).interfaces \
> - $(DOC_MODULE).prerequisites \
> - $(DOC_MODULE).signals
> -
> -REPORT_FILES = \
> - $(DOC_MODULE)-undocumented.txt \
> - $(DOC_MODULE)-undeclared.txt \
> - $(DOC_MODULE)-unused.txt
> -
> -CLEANFILES = $(SCANOBJ_FILES) $(REPORT_FILES) $(DOC_STAMPS)
> -
> -if ENABLE_GTK_DOC
> -if GTK_DOC_BUILD_HTML
> -HTML_BUILD_STAMP=html-build.stamp
> -else
> -HTML_BUILD_STAMP=
> -endif
> -if GTK_DOC_BUILD_PDF
> -PDF_BUILD_STAMP=pdf-build.stamp
> -else
> -PDF_BUILD_STAMP=
> -endif
> -
> -all-local: $(HTML_BUILD_STAMP) $(PDF_BUILD_STAMP)
> -else
> -all-local:
> -endif
> -
> -docs: $(HTML_BUILD_STAMP) $(PDF_BUILD_STAMP)
> -
> -$(REPORT_FILES): sgml-build.stamp
> -
> -#### scan ####
> -
> -scan-build.stamp: $(HFILE_GLOB) $(CFILE_GLOB)
> - @echo 'gtk-doc: Scanning header files'
> - @-chmod -R u+w $(srcdir)
> - @_source_dir='' ; for i in $(DOC_SOURCE_DIR) ; do \
> - _source_dir="$${_source_dir} --source-dir=$$i" ; \
> - done ; \
> - cd $(srcdir) && \
> - gtkdoc-scan --module=$(DOC_MODULE) --ignore-headers="$(IGNORE_HFILES)" $${_source_dir} $(SCAN_OPTIONS) $(EXTRA_HFILES)
> - @if grep -l '^..*$$' $(srcdir)/$(DOC_MODULE).types > /dev/null 2>&1 ; then \
> - CC="$(GTKDOC_CC)" LD="$(GTKDOC_LD)" RUN="$(GTKDOC_RUN)" CFLAGS="$(GTKDOC_CFLAGS) $(CFLAGS)" LDFLAGS="$(GTKDOC_LIBS) $(LDFLAGS)" gtkdoc-scangobj $(SCANGOBJ_OPTIONS) --module=$(DOC_MODULE) --output-dir=$(srcdir) ; \
> - else \
> - cd $(srcdir) ; \
> - for i in $(SCANOBJ_FILES) ; do \
> - test -f $$i || touch $$i ; \
> - done \
> - fi
> - @touch scan-build.stamp
> -
> -$(DOC_MODULE)-decl.txt $(SCANOBJ_FILES) $(DOC_MODULE)-sections.txt $(DOC_MODULE)-overrides.txt: scan-build.stamp
> - @true
> -
> -#### templates ####
> -
> -tmpl-build.stamp: $(DOC_MODULE)-decl.txt $(SCANOBJ_FILES) $(DOC_MODULE)-sections.txt $(DOC_MODULE)-overrides.txt
> - @echo 'gtk-doc: Rebuilding template files'
> - @-chmod -R u+w $(srcdir)
> - @cd $(srcdir) && gtkdoc-mktmpl --module=$(DOC_MODULE) $(MKTMPL_OPTIONS)
> - @touch tmpl-build.stamp
> -
> -tmpl.stamp: tmpl-build.stamp
> - @true
> -
> -$(srcdir)/tmpl/*.sgml:
> - @true
> -
> -#### xml ####
> -
> -sgml-build.stamp: tmpl.stamp $(DOC_MODULE)-sections.txt $(srcdir)/tmpl/*.sgml $(expand_content_files)
> - @echo 'gtk-doc: Building XML'
> - @-chmod -R u+w $(srcdir)
> - @_source_dir='' ; for i in $(DOC_SOURCE_DIR) ; do \
> - _source_dir="$${_source_dir} --source-dir=$$i" ; \
> - done ; \
> - cd $(srcdir) && \
> - gtkdoc-mkdb --module=$(DOC_MODULE) --output-format=xml --expand-content-files="$(expand_content_files)" --main-sgml-file=$(DOC_MAIN_SGML_FILE) $${_source_dir} $(MKDB_OPTIONS)
> - @touch sgml-build.stamp
> -
> -sgml.stamp: sgml-build.stamp
> - @true
> -
> -#### html ####
> -
> -html-build.stamp: sgml.stamp $(DOC_MAIN_SGML_FILE) $(content_files)
> - @echo 'gtk-doc: Building HTML'
> - @-chmod -R u+w $(srcdir)
> - @rm -rf $(srcdir)/html
> - @mkdir $(srcdir)/html
> - @mkhtml_options=""; \
> - gtkdoc-mkhtml 2>&1 --help | grep >/dev/null "\-\-path"; \
> - if test "$(?)" = "0"; then \
> - mkhtml_options=--path="$(srcdir)"; \
> - fi; \
> - cd $(srcdir)/html && gtkdoc-mkhtml $$mkhtml_options $(MKHTML_OPTIONS) $(DOC_MODULE) ../$(DOC_MAIN_SGML_FILE)
> - @test "x$(HTML_IMAGES)" = "x" || ( cd $(srcdir) && cp $(HTML_IMAGES) html )
> - @echo 'gtk-doc: Fixing cross-references'
> - @cd $(srcdir) && gtkdoc-fixxref --module=$(DOC_MODULE) --module-dir=html --html-dir=$(HTML_DIR) $(FIXXREF_OPTIONS)
> - @touch html-build.stamp
> -
> -#### pdf ####
> -
> -pdf-build.stamp: sgml.stamp $(DOC_MAIN_SGML_FILE) $(content_files)
> - @echo 'gtk-doc: Building PDF'
> - @-chmod -R u+w $(srcdir)
> - @rm -rf $(srcdir)/$(DOC_MODULE).pdf
> - @mkpdf_imgdirs=""; \
> - if test "x$(HTML_IMAGES)" != "x"; then \
> - for img in $(HTML_IMAGES); do \
> - part=`dirname $$img`; \
> - echo $$mkpdf_imgdirs | grep >/dev/null "\-\-imgdir=$$part "; \
> - if test $$? != 0; then \
> - mkpdf_imgdirs="$$mkpdf_imgdirs --imgdir=$$part"; \
> - fi; \
> - done; \
> - fi; \
> - cd $(srcdir) && gtkdoc-mkpdf --path="$(abs_srcdir)" $$mkpdf_imgdirs $(DOC_MODULE) $(DOC_MAIN_SGML_FILE) $(MKPDF_OPTIONS)
> - @touch pdf-build.stamp
> -
> -##############
> -
> -clean-local:
> - rm -f *~ *.bak
> - rm -rf .libs
> -
> -distclean-local:
> - cd $(srcdir) && \
> - rm -rf xml $(REPORT_FILES) $(DOC_MODULE).pdf \
> - $(DOC_MODULE)-decl-list.txt $(DOC_MODULE)-decl.txt
> -
> -maintainer-clean-local: clean
> - cd $(srcdir) && rm -rf xml html
> -
> -install-data-local:
> - @installfiles=`echo $(srcdir)/html/*`; \
> - if test "$$installfiles" = '$(srcdir)/html/*'; \
> - then echo '-- Nothing to install' ; \
> - else \
> - if test -n "$(DOC_MODULE_VERSION)"; then \
> - installdir="$(DESTDIR)$(TARGET_DIR)-$(DOC_MODULE_VERSION)"; \
> - else \
> - installdir="$(DESTDIR)$(TARGET_DIR)"; \
> - fi; \
> - $(mkinstalldirs) $${installdir} ; \
> - for i in $$installfiles; do \
> - echo '-- Installing '$$i ; \
> - $(INSTALL_DATA) $$i $${installdir}; \
> - done; \
> - if test -n "$(DOC_MODULE_VERSION)"; then \
> - mv -f $${installdir}/$(DOC_MODULE).devhelp2 \
> - $${installdir}/$(DOC_MODULE)-$(DOC_MODULE_VERSION).devhelp2; \
> - mv -f $${installdir}/$(DOC_MODULE).devhelp \
> - $${installdir}/$(DOC_MODULE)-$(DOC_MODULE_VERSION).devhelp; \
> - fi; \
> - $(GTKDOC_REBASE) --relative --dest-dir=$(DESTDIR) --html-dir=$${installdir}; \
> - fi
> -
> -uninstall-local:
> - @if test -n "$(DOC_MODULE_VERSION)"; then \
> - installdir="$(DESTDIR)$(TARGET_DIR)-$(DOC_MODULE_VERSION)"; \
> - else \
> - installdir="$(DESTDIR)$(TARGET_DIR)"; \
> - fi; \
> - rm -rf $${installdir}
> -
> -#
> -# Require gtk-doc when making dist
> -#
> -if ENABLE_GTK_DOC
> -dist-check-gtkdoc:
> -else
> -dist-check-gtkdoc:
> - @echo "*** gtk-doc must be installed and enabled in order to make dist"
> - @false
> -endif
> -
> -dist-hook: dist-check-gtkdoc dist-hook-local
> - mkdir $(distdir)/tmpl
> - mkdir $(distdir)/html
> - -cp $(srcdir)/tmpl/*.sgml $(distdir)/tmpl
> - cp $(srcdir)/html/* $(distdir)/html
> - -cp $(srcdir)/$(DOC_MODULE).pdf $(distdir)/
> - -cp $(srcdir)/$(DOC_MODULE).types $(distdir)/
> - -cp $(srcdir)/$(DOC_MODULE)-sections.txt $(distdir)/
> - cd $(distdir) && rm -f $(DISTCLEANFILES)
> - $(GTKDOC_REBASE) --online --relative --html-dir=$(distdir)/html
> -
> -.PHONY : dist-hook-local docs
> diff --git a/meta-systemd/recipes-core/systemd/systemd/modprobe.rules b/meta-systemd/recipes-core/systemd/systemd/modprobe.rules
> deleted file mode 100644
> index d4a096b..0000000
> --- a/meta-systemd/recipes-core/systemd/systemd/modprobe.rules
> +++ /dev/null
> @@ -1,17 +0,0 @@
> -# There are a number of modifiers that are allowed to be used in some
> -# of the different fields. They provide the following subsitutions:
> -#
> -# %n the "kernel number" of the device.
> -# For example, 'sda3' has a "kernel number" of '3'
> -# %e the smallest number for that name which does not matches an existing node
> -# %k the kernel name for the device
> -# %M the kernel major number for the device
> -# %m the kernel minor number for the device
> -# %b the bus id for the device
> -# %c the string returned by the PROGRAM
> -# %s{filename} the content of a sysfs attribute
> -# %% the '%' char itself
> -#
> -
> -# Try and modprobe for drivers for new hardware
> -ACTION=="add", DEVPATH=="/devices/*", ENV{MODALIAS}=="?*", RUN+="/sbin/modprobe $env{MODALIAS}"
> diff --git a/meta-systemd/recipes-core/systemd/systemd/optional_secure_getenv.patch b/meta-systemd/recipes-core/systemd/systemd/optional_secure_getenv.patch
> deleted file mode 100644
> index 35f1467..0000000
> --- a/meta-systemd/recipes-core/systemd/systemd/optional_secure_getenv.patch
> +++ /dev/null
> @@ -1,19 +0,0 @@
> -on uclibc secure_getenv is not available
> -therefore default to using getenv instead
> -
> -Singed-off-by: Khem Raj <raj.khem at gmail.com>
> -
> -Upstream-Status: Pending
> -Index: git/src/shared/missing.h
> -===================================================================
> ---- git.orig/src/shared/missing.h 2012-09-22 18:46:44.141282145 -0700
> -+++ git/src/shared/missing.h 2012-09-22 18:48:44.081276570 -0700
> -@@ -233,6 +233,8 @@
> - #ifndef HAVE_SECURE_GETENV
> - # ifdef HAVE___SECURE_GETENV
> - # define secure_getenv __secure_getenv
> -+# elif defined __UCLIBC__
> -+# define secure_getenv getenv
> - # else
> - # error neither secure_getenv nor __secure_getenv are available
> - # endif
> diff --git a/meta-systemd/recipes-core/systemd/systemd/systemd-pam-configure-check-uclibc.patch b/meta-systemd/recipes-core/systemd/systemd/systemd-pam-configure-check-uclibc.patch
> deleted file mode 100644
> index 1bfc3bd..0000000
> --- a/meta-systemd/recipes-core/systemd/systemd/systemd-pam-configure-check-uclibc.patch
> +++ /dev/null
> @@ -1,26 +0,0 @@
> ---- systemd-185.orig/configure.ac 2012-06-04 14:15:16.000000000 -0400
> -+++ systemd-pam-185/configure.ac 2012-06-21 22:57:10.000000000 -0400
> -@@ -63,6 +63,23 @@
> -
> - AC_PATH_PROG([M4], [m4])
> -
> -+# check for few functions not implemented in uClibc
> -+
> -+AC_CHECK_FUNCS_ONCE(mkostemp execvpe posix_fallocate)
> -+
> -+# check for %ms format support - assume always no if cross compiling
> -+
> -+AC_MSG_CHECKING([whether %ms format is supported by *scanf])
> -+
> -+AC_RUN_IFELSE(
> -+ [AC_LANG_PROGRAM([[ include <stdio.h> ]],
> -+ [[ char *buf1, *buf2, *buf3, str="1 2.3 abcde" ;
> -+ int rc = sscanf(str, "%ms %ms %ms", &buf1, &buf2, &buf3) ;
> -+ return (rc==3)?0:1;]])],
> -+ [AC_DEFINE([HAVE_MSFORMAT], [1], [Define if %ms format is supported by *scanf.])],
> -+ [AC_MSG_RESULT([no])],
> -+ [AC_MSG_RESULT([no])])
> -+
> - # gtkdocize greps for '^GTK_DOC_CHECK', so it needs to be on its own line
> - m4_ifdef([GTK_DOC_CHECK], [
> - GTK_DOC_CHECK([1.18],[--flavour no-tmpl])
> diff --git a/meta-systemd/recipes-core/systemd/systemd/systemd-pam-fix-execvpe.patch b/meta-systemd/recipes-core/systemd/systemd/systemd-pam-fix-execvpe.patch
> deleted file mode 100644
> index 449c27f..0000000
> --- a/meta-systemd/recipes-core/systemd/systemd/systemd-pam-fix-execvpe.patch
> +++ /dev/null
> @@ -1,26 +0,0 @@
> -Index: git/src/nspawn/nspawn.c
> -===================================================================
> ---- git.orig/src/nspawn/nspawn.c 2012-09-22 17:57:05.000000000 -0700
> -+++ git/src/nspawn/nspawn.c 2012-09-22 18:01:41.541405768 -0700
> -@@ -63,6 +63,8 @@
> - LINK_GUEST
> - } LinkJournal;
> -
> -+#include "config.h"
> -+
> - static char *arg_directory = NULL;
> - static char *arg_user = NULL;
> - static char **arg_controllers = NULL;
> -@@ -1373,7 +1375,12 @@
> - a[0] = (char*) "/sbin/init";
> - execve(a[0], a, (char**) envp);
> - } else if (argc > optind)
> -+#ifdef HAVE_EXECVPE
> - execvpe(argv[optind], argv + optind, (char**) envp);
> -+#else
> -+ environ = (char **)envp;
> -+ execvp(argv[optind], argv + optind);
> -+#endif /* HAVE_EXECVPE */
> - else {
> - chdir(home ? home : "/root");
> - execle("/bin/bash", "-bash", NULL, (char**) envp);
> diff --git a/meta-systemd/recipes-core/systemd/systemd/systemd-pam-fix-fallocate.patch b/meta-systemd/recipes-core/systemd/systemd/systemd-pam-fix-fallocate.patch
> deleted file mode 100644
> index 089ba64..0000000
> --- a/meta-systemd/recipes-core/systemd/systemd/systemd-pam-fix-fallocate.patch
> +++ /dev/null
> @@ -1,82 +0,0 @@
> -Index: git/src/journal/journal-file.c
> -===================================================================
> ---- git.orig/src/journal/journal-file.c 2012-09-02 09:49:15.126089594 -0700
> -+++ git/src/journal/journal-file.c 2012-09-02 09:49:17.118089670 -0700
> -@@ -34,6 +34,8 @@
> - #include "compress.h"
> - #include "fsprg.h"
> -
> -+#include "config.h"
> -+
> - #define DEFAULT_DATA_HASH_TABLE_SIZE (2047ULL*sizeof(HashItem))
> - #define DEFAULT_FIELD_HASH_TABLE_SIZE (333ULL*sizeof(HashItem))
> -
> -@@ -262,7 +264,7 @@
> -
> - static int journal_file_allocate(JournalFile *f, uint64_t offset, uint64_t size) {
> - uint64_t old_size, new_size;
> -- int r;
> -+ int r = 0;
> -
> - assert(f);
> -
> -@@ -307,10 +309,25 @@
> - /* Note that the glibc fallocate() fallback is very
> - inefficient, hence we try to minimize the allocation area
> - as we can. */
> -+#ifdef HAVE_POSIX_ALLOCATE
> - r = posix_fallocate(f->fd, old_size, new_size - old_size);
> - if (r != 0)
> - return -r;
> -
> -+#else
> -+ /* Use good old method to write zeros into the journal file
> -+ perhaps very inefficient yet working. */
> -+ if(new_size > old_size) {
> -+ char *buf = alloca(new_size - old_size);
> -+ off_t oldpos = lseek(f->fd, 0, SEEK_CUR);
> -+ bzero(buf, new_size - old_size);
> -+ lseek(f->fd, old_size, SEEK_SET);
> -+ r = write(f->fd, buf, new_size - old_size);
> -+ lseek(f->fd, oldpos, SEEK_SET);
> -+ }
> -+ if (r < 0)
> -+ return -errno;
> -+#endif /* HAVE_POSIX_FALLOCATE */
> - if (fstat(f->fd, &f->last_stat) < 0)
> - return -errno;
> -
> -Index: git/src/journal/journald-kmsg.c
> -===================================================================
> ---- git.orig/src/journal/journald-kmsg.c 2012-09-02 09:49:15.130089595 -0700
> -+++ git/src/journal/journald-kmsg.c 2012-09-02 12:26:17.326447895 -0700
> -@@ -404,6 +404,7 @@
> -
> - int server_open_kernel_seqnum(Server *s) {
> - int fd;
> -+ int r = 0;
> - uint64_t *p;
> -
> - assert(s);
> -@@ -417,8 +418,19 @@
> - log_error("Failed to open /run/systemd/journal/kernel-seqnum, ignoring: %m");
> - return 0;
> - }
> --
> -- if (posix_fallocate(fd, 0, sizeof(uint64_t)) < 0) {
> -+#ifdef HAVE_POSIX_ALLOCATE
> -+ r = posix_fallocate(fd, 0, sizeof(uint64_t));
> -+#else
> -+ /* Use good old method to write zeros into the journal file
> -+ perhaps very inefficient yet working. */
> -+ char *buf = alloca(sizeof(uint64_t));
> -+ off_t oldpos = lseek(fd, 0, SEEK_CUR);
> -+ bzero(buf, sizeof(uint64_t));
> -+ lseek(fd, 0, SEEK_SET);
> -+ r = write(fd, buf, sizeof(uint64_t));
> -+ lseek(fd, oldpos, SEEK_SET);
> -+#endif /* HAVE_POSIX_FALLOCATE */
> -+ if (r < 0) {
> - log_error("Failed to allocate sequential number file, ignoring: %m");
> - close_nointr_nofail(fd);
> - return 0;
> diff --git a/meta-systemd/recipes-core/systemd/systemd/systemd-pam-fix-getty-unit.patch b/meta-systemd/recipes-core/systemd/systemd/systemd-pam-fix-getty-unit.patch
> deleted file mode 100644
> index 3e5ea71..0000000
> --- a/meta-systemd/recipes-core/systemd/systemd/systemd-pam-fix-getty-unit.patch
> +++ /dev/null
> @@ -1,35 +0,0 @@
> -Prefer getty to agetty in console setup systemd units
> -
> -Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
> ----
> - units/getty at .service.m4 | 2 +-
> - units/serial-getty at .service.m4 | 2 +-
> - 2 files changed, 2 insertions(+), 2 deletions(-)
> -
> -Index: systemd-37/units/getty at .service.m4
> -===================================================================
> ---- systemd-37.orig/units/getty at .service.m4
> -+++ systemd-37/units/getty at .service.m4
> -@@ -41,7 +41,7 @@
> -
> - [Service]
> - Environment=TERM=linux
> - # the VT is cleared by TTYVTDisallocate
> --ExecStart=-/sbin/agetty --noclear %I 38400
> -+ExecStart=-/sbin/getty -L %I 115200 linux
> - Type=idle
> - Restart=always
> - RestartSec=0
> -Index: systemd-37/units/serial-getty at .service.m4
> -===================================================================
> ---- systemd-37.orig/units/serial-getty at .service.m4
> -+++ systemd-37/units/serial-getty at .service.m4
> -@@ -37,7 +37,7 @@
> -
> - [Service]
> - Environment=TERM=vt102
> --ExecStart=-/sbin/agetty -s %I 115200,38400,9600
> -+ExecStart=-/sbin/getty -L %I 115200 vt100
> - Type=idle
> - Restart=always
> - RestartSec=0
> diff --git a/meta-systemd/recipes-core/systemd/systemd/systemd-pam-fix-mkostemp.patch b/meta-systemd/recipes-core/systemd/systemd/systemd-pam-fix-mkostemp.patch
> deleted file mode 100644
> index 8de9a3a..0000000
> --- a/meta-systemd/recipes-core/systemd/systemd/systemd-pam-fix-mkostemp.patch
> +++ /dev/null
> @@ -1,166 +0,0 @@
> -Index: git/src/journal/journal-send.c
> -===================================================================
> ---- git.orig/src/journal/journal-send.c 2012-09-02 00:10:08.748768268 -0700
> -+++ git/src/journal/journal-send.c 2012-09-02 00:10:10.508768335 -0700
> -@@ -34,6 +34,8 @@
> -
> - #define SNDBUF_SIZE (8*1024*1024)
> -
> -+#include "config.h"
> -+
> - /* We open a single fd, and we'll share it with the current process,
> - * all its threads, and all its subprocesses. This means we need to
> - * initialize it atomically, and need to operate on it atomically
> -@@ -293,7 +295,12 @@
> - * file and just pass a file descriptor of it to the other
> - * side */
> -
> -+#ifdef HAVE_MKOSTEMP
> - buffer_fd = mkostemp(path, O_CLOEXEC|O_RDWR);
> -+#else
> -+ buffer_fd = mkstemp(path);
> -+ if (buffer_fd >= 0) fcntl(buffer_fd, F_SETFD, FD_CLOEXEC);
> -+#endif /* HAVE_MKOSTEMP */
> - if (buffer_fd < 0) {
> - r = -errno;
> - goto finish;
> -Index: git/src/core/manager.c
> -===================================================================
> ---- git.orig/src/core/manager.c 2012-09-02 00:10:08.732768266 -0700
> -+++ git/src/core/manager.c 2012-09-02 00:10:10.512768334 -0700
> -@@ -67,6 +67,8 @@
> - #include "cgroup-util.h"
> - #include "path-util.h"
> -
> -+#include "config.h"
> -+
> - /* As soon as 16 units are in our GC queue, make sure to run a gc sweep */
> - #define GC_QUEUE_ENTRIES_MAX 16
> -
> -@@ -1701,7 +1703,12 @@
> - return -ENOMEM;
> -
> - saved_umask = umask(0077);
> -+#ifdef HAVE_MKOSTEMP
> - fd = mkostemp(path, O_RDWR|O_CLOEXEC);
> -+#else
> -+ fd = mkstemp(path);
> -+ if (fd >= 0) fcntl(fd, F_SETFD, FD_CLOEXEC);
> -+#endif /* HAVE_MKOSTEMP */
> - umask(saved_umask);
> -
> - if (fd < 0) {
> -Index: git/src/shared/util.c
> -===================================================================
> ---- git.orig/src/shared/util.c 2012-09-02 00:10:08.784768269 -0700
> -+++ git/src/shared/util.c 2012-09-02 00:10:10.512768334 -0700
> -@@ -68,6 +68,8 @@
> - #include "exit-status.h"
> - #include "hashmap.h"
> -
> -+#include "config.h"
> -+
> - int saved_argc = 0;
> - char **saved_argv = NULL;
> -
> -@@ -4519,7 +4521,12 @@
> - t[k] = '.';
> - stpcpy(stpcpy(t+k+1, fn), "XXXXXX");
> -
> -+#ifdef HAVE_MKOSTEMP
> - fd = mkostemp(t, O_WRONLY|O_CLOEXEC);
> -+#else
> -+ fd = mkstemp(t);
> -+ if (fd >= 0) fcntl(fd, F_SETFD, FD_CLOEXEC);
> -+#endif /* HAVE_MKOSTEMP */
> - if (fd < 0) {
> - free(t);
> - return -errno;
> -Index: git/src/shared/ask-password-api.c
> -===================================================================
> ---- git.orig/src/shared/ask-password-api.c 2012-09-02 00:10:08.772768268 -0700
> -+++ git/src/shared/ask-password-api.c 2012-09-02 00:10:10.512768334 -0700
> -@@ -37,6 +37,8 @@
> -
> - #include "ask-password-api.h"
> -
> -+#include "config.h"
> -+
> - static void backspace_chars(int ttyfd, size_t p) {
> -
> - if (ttyfd < 0)
> -@@ -326,7 +328,12 @@
> - mkdir_p_label("/run/systemd/ask-password", 0755);
> -
> - u = umask(0022);
> -+#ifdef HAVE_MKOSTEMP
> - fd = mkostemp(temp, O_CLOEXEC|O_CREAT|O_WRONLY);
> -+#else
> -+ fd = mkstemp(temp);
> -+ if (fd >= 0) fcntl(fd, F_SETFD, FD_CLOEXEC);
> -+#endif /* HAVE_MKOSTEMP */
> - umask(u);
> -
> - if (fd < 0) {
> -Index: git/src/journal/journalctl.c
> -===================================================================
> ---- git.orig/src/journal/journalctl.c 2012-09-02 00:10:08.752768267 -0700
> -+++ git/src/journal/journalctl.c 2012-09-02 00:18:41.928787779 -0700
> -@@ -540,7 +540,13 @@
> - n /= arg_interval;
> -
> - close_nointr_nofail(fd);
> -+#ifdef HAVE_MKOSTEMP
> - fd = mkostemp(k, O_WRONLY|O_CLOEXEC|O_NOCTTY);
> -+#else
> -+ fd = mkstemp(k);
> -+ if (fd >= 0) fcntl(fd, F_SETFD, FD_CLOEXEC);
> -+#endif /* HAVE_MKOSTEMP */
> -+
> - if (fd < 0) {
> - log_error("Failed to open %s: %m", k);
> - r = -errno;
> -Index: git/src/journal/journal-verify.c
> -===================================================================
> ---- git.orig/src/journal/journal-verify.c 2012-09-02 00:10:08.752768267 -0700
> -+++ git/src/journal/journal-verify.c 2012-09-02 00:24:10.268800268 -0700
> -@@ -693,8 +693,12 @@
> - #endif
> - } else if (f->seal)
> - return -ENOKEY;
> --
> -+#ifdef HAVE_MKOSTEMP
> - data_fd = mkostemp(data_path, O_CLOEXEC);
> -+#else
> -+ data_fd = mkstemp(data_path);
> -+ if (data_fd >= 0) fcntl(data_fd, F_SETFD, FD_CLOEXEC);
> -+#endif /* HAVE_MKOSTEMP */
> - if (data_fd < 0) {
> - log_error("Failed to create data file: %m");
> - r = -errno;
> -@@ -702,7 +706,12 @@
> - }
> - unlink(data_path);
> -
> -+#ifdef HAVE_MKOSTEMP
> - entry_fd = mkostemp(entry_path, O_CLOEXEC);
> -+#else
> -+ entry_fd = mkstemp(entry_path);
> -+ if (entry_fd >= 0) fcntl(entry_fd, F_SETFD, FD_CLOEXEC);
> -+#endif /* HAVE_MKOSTEMP */
> - if (entry_fd < 0) {
> - log_error("Failed to create entry file: %m");
> - r = -errno;
> -@@ -710,7 +719,12 @@
> - }
> - unlink(entry_path);
> -
> -+#ifdef HAVE_MKOSTEMP
> - entry_array_fd = mkostemp(entry_array_path, O_CLOEXEC);
> -+#else
> -+ entry_array_fd = mkstemp(entry_array_path);
> -+ if (entry_array_fd >= 0) fcntl(entry_array_fd, F_SETFD, FD_CLOEXEC);
> -+#endif /* HAVE_MKOSTEMP */
> - if (entry_array_fd < 0) {
> - log_error("Failed to create entry array file: %m");
> - r = -errno;
> diff --git a/meta-systemd/recipes-core/systemd/systemd/systemd-pam-fix-msformat.patch b/meta-systemd/recipes-core/systemd/systemd/systemd-pam-fix-msformat.patch
> deleted file mode 100644
> index ee63329..0000000
> --- a/meta-systemd/recipes-core/systemd/systemd/systemd-pam-fix-msformat.patch
> +++ /dev/null
> @@ -1,335 +0,0 @@
> ---- systemd-pam-185/src/fsck/fsck.c.orig 2012-06-22 23:22:22.000000000 -0400
> -+++ systemd-pam-185/src/fsck/fsck.c 2012-06-22 21:15:56.000000000 -0400
> -@@ -36,6 +36,8 @@
> - #include "bus-errors.h"
> - #include "virt.h"
> -
> -+#include "config.h"
> -+
> - static bool arg_skip = false;
> - static bool arg_force = false;
> - static bool arg_show_progress = false;
> -@@ -193,9 +195,16 @@
> - char *device;
> - double p;
> - usec_t t;
> --
> -+#ifdef HAVE_MSFORMAT
> - if (fscanf(f, "%i %lu %lu %ms", &pass, &cur, &max, &device) != 4)
> -- break;
> -+#else
> -+ device = malloc(257);
> -+ if (fscanf(f, "%i %lu %lu %256s", &pass, &cur, &max, device) != 4) {
> -+ free(device);
> -+ }
> -+
> -+#endif /* HAVE_MSFORMAT */
> -+ break;
> -
> - /* Only show one progress counter at max */
> - if (!locked) {
> ---- systemd-pam-185/src/core/swap.c.orig 2012-06-22 23:22:55.000000000 -0400
> -+++ systemd-pam-185/src/core/swap.c 2012-06-22 21:17:10.000000000 -0400
> -@@ -40,6 +40,8 @@
> - #include "def.h"
> - #include "path-util.h"
> -
> -+#include "config.h"
> -+
> - static const UnitActiveState state_translation_table[_SWAP_STATE_MAX] = {
> - [SWAP_DEAD] = UNIT_INACTIVE,
> - [SWAP_ACTIVATING] = UNIT_ACTIVATING,
> -@@ -1038,7 +1040,7 @@
> - for (i = 1;; i++) {
> - char *dev = NULL, *d;
> - int prio = 0, k;
> --
> -+#ifdef HAVE_MSFORMAT
> - if ((k = fscanf(m->proc_swaps,
> - "%ms " /* device/file */
> - "%*s " /* type of swap */
> -@@ -1046,10 +1048,18 @@
> - "%*s " /* used */
> - "%i\n", /* priority */
> - &dev, &prio)) != 2) {
> --
> -+#else
> -+ dev = malloc(257);
> -+ if ((k = fscanf(m->proc_swaps,
> -+ "%256s " /* device/file */
> -+ "%*s " /* type of swap */
> -+ "%*s " /* swap size */
> -+ "%*s " /* used */
> -+ "%i\n", /* priority */
> -+ dev, &prio)) != 2) {
> -+#endif /* HAVE_MSFORMAT */
> - if (k == EOF)
> - break;
> --
> - log_warning("Failed to parse /proc/swaps:%u.", i);
> - free(dev);
> - continue;
> ---- systemd-pam-185/src/core/mount-setup.c.orig 2012-06-22 23:23:41.000000000 -0400
> -+++ systemd-pam-185/src/core/mount-setup.c 2012-06-22 21:19:44.000000000 -0400
> -@@ -28,6 +28,7 @@
> - #include <assert.h>
> - #include <unistd.h>
> - #include <ftw.h>
> -+#include <linux/fs.h>
> -
> - #include "mount-setup.h"
> - #include "dev-setup.h"
> -@@ -41,6 +41,8 @@
> - #include "path-util.h"
> - #include "missing.h"
> -
> -+#include "config.h"
> -+
> - #ifndef TTY_GID
> - #define TTY_GID 5
> - #endif
> -@@ -200,9 +202,12 @@
> - for (;;) {
> - char *controller;
> - int enabled = 0;
> --
> -+#ifdef HAVE_MSFORMAT
> - if (fscanf(f, "%ms %*i %*i %i", &controller, &enabled) != 2) {
> --
> -+#else
> -+ controller = malloc(257);
> -+ if (fscanf(f, "%256s %*i %*i %i", controller, &enabled) != 2) {
> -+#endif /* HAVE_MSFORMAT */
> - if (feof(f))
> - break;
> -
> ---- systemd-pam-185/src/core/mount.c.orig 2012-06-22 23:24:17.000000000 -0400
> -+++ systemd-pam-185/src/core/mount.c 2012-06-22 22:51:21.000000000 -0400
> -@@ -41,6 +41,8 @@
> - #include "exit-status.h"
> - #include "def.h"
> -
> -+#include "config.h"
> -+
> - static const UnitActiveState state_translation_table[_MOUNT_STATE_MAX] = {
> - [MOUNT_DEAD] = UNIT_INACTIVE,
> - [MOUNT_MOUNTING] = UNIT_ACTIVATING,
> -@@ -1514,7 +1516,7 @@
> - int k;
> -
> - device = path = options = options2 = fstype = d = p = o = NULL;
> --
> -+#ifdef HAVE_MSFORMAT
> - if ((k = fscanf(m->proc_self_mountinfo,
> - "%*s " /* (1) mount id */
> - "%*s " /* (2) parent id */
> -@@ -1533,7 +1535,31 @@
> - &fstype,
> - &device,
> - &options2)) != 5) {
> --
> -+#else
> -+ path = malloc(257);
> -+ options = malloc(257);
> -+ fstype = malloc(257);
> -+ device = malloc(257);
> -+ options2 = malloc(257);
> -+ if ((k = fscanf(m->proc_self_mountinfo,
> -+ "%*s " /* (1) mount id */
> -+ "%*s " /* (2) parent id */
> -+ "%*s " /* (3) major:minor */
> -+ "%*s " /* (4) root */
> -+ "%256s " /* (5) mount point */
> -+ "%256s" /* (6) mount options */
> -+ "%*[^-]" /* (7) optional fields */
> -+ "- " /* (8) separator */
> -+ "%256s " /* (9) file system type */
> -+ "%256s" /* (10) mount source */
> -+ "%256s" /* (11) mount options 2 */
> -+ "%*[^\n]", /* some rubbish at the end */
> -+ path,
> -+ options,
> -+ fstype,
> -+ device,
> -+ options2)) != 5) {
> -+#endif /* HAVE_MSFORMAT */
> - if (k == EOF)
> - break;
> -
> ---- systemd-pam-185/src/core/umount.c.orig 2012-06-22 23:24:37.000000000 -0400
> -+++ systemd-pam-185/src/core/umount.c 2012-06-22 22:56:15.000000000 -0400
> -@@ -35,6 +35,8 @@
> - #include "path-util.h"
> - #include "util.h"
> -
> -+#include "config.h"
> -+
> - typedef struct MountPoint {
> - char *path;
> - dev_t devnum;
> -@@ -74,7 +76,7 @@
> - MountPoint *m;
> -
> - path = p = NULL;
> --
> -+#ifdef HAVE_MSFORMAT
> - if ((k = fscanf(proc_self_mountinfo,
> - "%*s " /* (1) mount id */
> - "%*s " /* (2) parent id */
> -@@ -89,6 +91,23 @@
> - "%*s" /* (11) mount options 2 */
> - "%*[^\n]", /* some rubbish at the end */
> - &path)) != 1) {
> -+#else
> -+ path = malloc(257);
> -+ if ((k = fscanf(proc_self_mountinfo,
> -+ "%*s " /* (1) mount id */
> -+ "%*s " /* (2) parent id */
> -+ "%*s " /* (3) major:minor */
> -+ "%*s " /* (4) root */
> -+ "%256s " /* (5) mount point */
> -+ "%*s" /* (6) mount options */
> -+ "%*[^-]" /* (7) optional fields */
> -+ "- " /* (8) separator */
> -+ "%*s " /* (9) file system type */
> -+ "%*s" /* (10) mount source */
> -+ "%*s" /* (11) mount options 2 */
> -+ "%*[^\n]", /* some rubbish at the end */
> -+ path)) != 1) {
> -+#endif /* HAVE_MSFORMAT */
> - if (k == EOF)
> - break;
> -
> -@@ -150,7 +169,7 @@
> - MountPoint *swap;
> - char *dev = NULL, *d;
> - int k;
> --
> -+#ifdef HAVE_MSFORMAT
> - if ((k = fscanf(proc_swaps,
> - "%ms " /* device/file */
> - "%*s " /* type of swap */
> -@@ -158,7 +177,16 @@
> - "%*s " /* used */
> - "%*s\n", /* priority */
> - &dev)) != 1) {
> --
> -+#else
> -+ dev = malloc(257);
> -+ if ((k = fscanf(proc_swaps,
> -+ "%256s " /* device/file */
> -+ "%*s " /* type of swap */
> -+ "%*s " /* swap size */
> -+ "%*s " /* used */
> -+ "%*s\n", /* priority */
> -+ dev)) != 1) {
> -+#endif /* HAVE_MSFORMAT */
> - if (k == EOF)
> - break;
> -
> ---- systemd-pam-185/src/shared/socket-util.c.orig 2012-06-22 23:25:00.000000000 -0400
> -+++ systemd-pam-185/src/shared/socket-util.c 2012-06-22 22:59:27.000000000 -0400
> -@@ -39,6 +39,8 @@
> - #include "socket-util.h"
> - #include "missing.h"
> -
> -+#include "config.h"
> -+
> - int socket_address_parse(SocketAddress *a, const char *s) {
> - int r;
> - char *e, *n;
> -@@ -201,8 +203,16 @@
> - a->type = SOCK_RAW;
> -
> - errno = 0;
> -- if (sscanf(s, "%ms %u", &sfamily, &group) < 1)
> -+#ifdef HAVE_MSFORMAT
> -+ if (sscanf(s, "%ms %u", &sfamily, &group) < 1)
> -+ return errno ? -errno : -EINVAL;
> -+#else
> -+ sfamily = malloc(257);
> -+ if (sscanf(s, "%256s %u", sfamily, &group) < 1) {
> -+ free(sfamily);
> - return errno ? -errno : -EINVAL;
> -+ }
> -+#endif /* HAVE_MSFORMAT */
> -
> - if ((family = netlink_family_from_string(sfamily)) < 0)
> - if (safe_atoi(sfamily, &family) < 0) {
> ---- systemd-pam-185/src/tmpfiles/tmpfiles.c.orig 2012-06-22 23:25:21.000000000 -0400
> -+++ systemd-pam-185/src/tmpfiles/tmpfiles.c 2012-06-22 23:13:49.000000000 -0400
> -@@ -48,6 +48,8 @@
> - #include "set.h"
> - #include "conf-files.h"
> -
> -+#include "config.h"
> -+
> - /* This reads all files listed in /etc/tmpfiles.d/?*.conf and creates
> - * them in the file system. This is intended to be used to create
> - * properly owned directories beneath /tmp, /var/tmp, /run, which are
> -@@ -970,7 +972,7 @@
> - i = new0(Item, 1);
> - if (!i)
> - return log_oom();
> --
> -+#ifdef HAVE_MSFORMAT
> - if (sscanf(buffer,
> - "%c "
> - "%ms "
> -@@ -986,6 +988,28 @@
> - &group,
> - &age,
> - &n) < 2) {
> -+#else
> -+ i->path = malloc(257);
> -+ mode = malloc(257);
> -+ user = malloc(257);
> -+ group = malloc(257);
> -+ age = malloc(257);
> -+ if (sscanf(buffer,
> -+ "%c "
> -+ "%256s "
> -+ "%256s "
> -+ "%256s "
> -+ "%256s "
> -+ "%256s "
> -+ "%n",
> -+ &type,
> -+ i->path,
> -+ mode,
> -+ user,
> -+ group,
> -+ age,
> -+ &n) < 2) {
> -+#endif /* HAVE_MSFORMAT */
> - log_error("[%s:%u] Syntax error.", fname, line);
> - r = -EIO;
> - goto finish;
> ---- systemd-pam-185/src/cryptsetup/cryptsetup-generator.c.orig 2012-06-22 23:25:47.000000000 -0400
> -+++ systemd-pam-185/src/cryptsetup/cryptsetup-generator.c 2012-06-22 23:16:35.000000000 -0400
> -@@ -30,6 +30,8 @@
> - #include "virt.h"
> - #include "strv.h"
> -
> -+#include "config.h"
> -+
> - static const char *arg_dest = "/tmp";
> - static bool arg_enabled = true;
> - static bool arg_read_crypttab = true;
> -@@ -421,8 +423,15 @@
> - l = strstrip(line);
> - if (*l == '#' || *l == 0)
> - continue;
> --
> -+#ifdef HAVE_MSFORMAT
> - k = sscanf(l, "%ms %ms %ms %ms", &name, &device, &password, &options);
> -+#else
> -+ name = malloc(257);
> -+ device = malloc(257);
> -+ password = malloc(257);
> -+ options = malloc(257);
> -+ k = sscanf(l, "%256s %256s %256s %256s", name, device, password, options);
> -+#endif /* HAVE_MSFORMAT */
> - if (k < 2 || k > 4) {
> - log_error("Failed to parse /etc/crypttab:%u, ignoring.", n);
> - r = EXIT_FAILURE;
> diff --git a/meta-systemd/recipes-core/systemd/systemd/touchscreen.rules b/meta-systemd/recipes-core/systemd/systemd/touchscreen.rules
> deleted file mode 100644
> index d83fd16..0000000
> --- a/meta-systemd/recipes-core/systemd/systemd/touchscreen.rules
> +++ /dev/null
> @@ -1,18 +0,0 @@
> -# There are a number of modifiers that are allowed to be used in some
> -# of the different fields. They provide the following subsitutions:
> -#
> -# %n the "kernel number" of the device.
> -# For example, 'sda3' has a "kernel number" of '3'
> -# %e the smallest number for that name which does not matches an existing node
> -# %k the kernel name for the device
> -# %M the kernel major number for the device
> -# %m the kernel minor number for the device
> -# %b the bus id for the device
> -# %c the string returned by the PROGRAM
> -# %s{filename} the content of a sysfs attribute
> -# %% the '%' char itself
> -#
> -
> -# Create a symlink to any touchscreen input device
> -SUBSYSTEM=="input", KERNEL=="event[0-9]*", ATTRS{modalias}=="input:*-e0*,3,*a0,1,*18,*", SYMLINK+="input/touchscreen0"
> -SUBSYSTEM=="input", KERNEL=="event[0-9]*", ATTRS{modalias}=="ads7846", SYMLINK+="input/touchscreen0"
> diff --git a/meta-systemd/recipes-core/systemd/systemd/var-run.conf b/meta-systemd/recipes-core/systemd/systemd/var-run.conf
> deleted file mode 100644
> index c2c18e2..0000000
> --- a/meta-systemd/recipes-core/systemd/systemd/var-run.conf
> +++ /dev/null
> @@ -1,4 +0,0 @@
> -# empty /var/run
> -R /var/run/* - - - - -
> -# systemd-update-utmp-runlevel.service fails to start without this
> -f /var/run/utmp 0644 root root - -
> diff --git a/meta-systemd/recipes-core/systemd/systemd_git.bb b/meta-systemd/recipes-core/systemd/systemd_git.bb
> deleted file mode 100644
> index f2e168e..0000000
> --- a/meta-systemd/recipes-core/systemd/systemd_git.bb
> +++ /dev/null
> @@ -1,263 +0,0 @@
> -DESCRIPTION = "Systemd a init replacement"
> -HOMEPAGE = "http://www.freedesktop.org/wiki/Software/systemd"
> -
> -LICENSE = "GPLv2 & LGPLv2.1 & MIT"
> -LIC_FILES_CHKSUM = "file://LICENSE.GPL2;md5=751419260aa954499f7abaabaa882bbe \
> - file://LICENSE.LGPL2.1;md5=f0df8fd67dfa1db3cc0bd431837f0b89 \
> - file://LICENSE.MIT;md5=544799d0b492f119fa04641d1b8868ed"
> -
> -PROVIDES = "udev"
> -
> -DEPENDS = "xz kmod docbook-sgml-dtd-4.1-native intltool-native gperf-native acl readline dbus libcap libcgroup tcp-wrappers usbutils glib-2.0 libgcrypt python"
> -DEPENDS += "${@base_contains('DISTRO_FEATURES', 'pam', 'libpam', '', d)}"
> -
> -SERIAL_CONSOLE ?= "115200 /dev/ttyS0"
> -
> -SECTION = "base/shell"
> -
> -inherit gitpkgv
> -PKGV = "v${GITPKGVTAG}"
> -
> -PV = "git"
> -PR = "r13"
> -
> -# need to export these variables for python-config to work
> -export BUILD_SYS
> -export HOST_SYS
> -export STAGING_INCDIR
> -export STAGING_LIBDIR
> -
> -inherit useradd pkgconfig autotools perlnative pythonnative python-dir
> -
> -SRCREV = "decd634e801bee2c554edb35383cc9d43417a850"
> -SRC_URI = "git://anongit.freedesktop.org/systemd/systemd;protocol=git \
> - file://0001-Revert-systemd-analyze-use-argparse-instead-of-getop.patch \
> - file://0002-Revert-analyze-use-GDBus-instead-of-dbus-python.patch \
> - file://gtk-doc.make \
> - file://touchscreen.rules \
> - file://modprobe.rules \
> - file://var-run.conf \
> - ${UCLIBCPATCHES} \
> - "
> -UCLIBCPATCHES = ""
> -UCLIBCPATCHES_libc-uclibc = "file://systemd-pam-configure-check-uclibc.patch \
> - file://systemd-pam-fix-execvpe.patch \
> - file://systemd-pam-fix-fallocate.patch \
> - file://systemd-pam-fix-getty-unit.patch \
> - file://systemd-pam-fix-mkostemp.patch \
> - file://systemd-pam-fix-msformat.patch \
> - file://optional_secure_getenv.patch \
> - "
> -LDFLAGS_libc-uclibc_append = " -lrt"
> -
> -S = "${WORKDIR}/git"
> -
> -SYSTEMDDISTRO ?= "debian"
> -SYSTEMDDISTRO_angstrom = "angstrom"
> -
> -CACHED_CONFIGUREVARS = "ac_cv_file__usr_share_pci_ids=no \
> - ac_cv_file__usr_share_hwdata_pci_ids=no \
> - ac_cv_file__usr_share_misc_pci_ids=yes"
> -# The gtk+ tools should get built as a separate recipe e.g. systemd-tools
> -EXTRA_OECONF = " --with-distro=${SYSTEMDDISTRO} \
> - --with-rootprefix=${base_prefix} \
> - --with-rootlibdir=${base_libdir} \
> - --sbindir=${base_sbindir} \
> - --libexecdir=${base_libdir} \
> - ${@base_contains('DISTRO_FEATURES', 'pam', '--enable-pam', '--disable-pam', d)} \
> - --enable-xz \
> - --disable-manpages \
> - --disable-coredump \
> - --disable-introspection \
> - --with-pci-ids-path=/usr/share/misc \
> - --disable-gtk-doc-html \
> - --disable-tcpwrap \
> - --enable-split-usr \
> - --disable-microhttpd \
> - --with-python \
> - "
> -
> -# There's no docbook-xsl-native, so for the xsltproc check to false
> -do_configure_prepend() {
> - export CPP="${HOST_PREFIX}cpp ${TOOLCHAIN_OPTIONS} ${HOST_CC_ARCH}"
> - sed -i /xsltproc/d configure.ac
> -
> - cp ${WORKDIR}/gtk-doc.make ${S}/docs/
> -
> - # we only have /home/root, not /root
> - sed -i -e 's:=/root:=/home/root:g' units/*.service*
> -}
> -
> -do_install() {
> - autotools_do_install
> - install -d ${D}${base_sbindir}
> - # provided by a seperate recipe
> - rm ${D}${systemd_unitdir}/system/serial-getty* -f
> -
> - # provide support for initramfs
> - ln -s ${systemd_unitdir}/systemd ${D}/init
> -
> - # create dir for journal
> - install -d ${D}${localstatedir}/log/journal
> - # udevd is needed in initramfs which was provided by udev in OE-Core
> - # so we need to provide that otherwise it pulls in both systemd and
> - # udev
> - ln -s ${systemd_unitdir}/systemd-udevd ${D}${base_sbindir}/udevd
> - # create machine-id
> - # 20:12 < mezcalero> koen: you have three options: a) run systemd-machine-id-setup at install time, b) have / read-only and an empty file there (for stateless) and c) boot with / writable
> - touch ${D}${sysconfdir}/machine-id
> -
> - install -m 0644 ${WORKDIR}/*.rules ${D}${sysconfdir}/udev/rules.d/
> -
> - install -m 0644 ${WORKDIR}/var-run.conf ${D}${sysconfdir}/tmpfiles.d/
> -}
> -
> -python populate_packages_prepend (){
> - systemdlibdir = d.getVar("base_libdir", True)
> - do_split_packages(d, systemdlibdir, '^lib(.*)\.so\.*', 'lib%s', 'Systemd %s library', extra_depends='', allow_links=True)
> -}
> -PACKAGES_DYNAMIC += "^lib(udev|gudev|systemd).*"
> -
> -PACKAGES =+ "${PN}-gui ${PN}-vconsole-setup ${PN}-initramfs ${PN}-analyze python-${PN}-journal"
> -
> -USERADD_PACKAGES = "${PN}"
> -GROUPADD_PARAM_${PN} = "-r lock"
> -
> -FILES_${PN}-analyze = "${bindir}/systemd-analyze"
> -RDEPENDS_${PN}-analyze = "python-dbus python-argparse python-textutils"
> -RRECOMMENDS_${PN}-analyze = "python-pycairo"
> -
> -FILES_python-${PN}-journal = "${PYTHON_SITEPACKAGES_DIR}/systemd/*.py* ${PYTHON_SITEPACKAGES_DIR}/systemd/*.so"
> -RDEPENDS_python-${PN}-journal = "python-core"
> -
> -FILES_${PN}-initramfs = "/init"
> -RDEPENDS_${PN}-initramfs = "${PN}"
> -
> -FILES_${PN}-gui = "${bindir}/systemadm"
> -
> -FILES_${PN}-vconsole-setup = "${systemd_unitdir}/systemd-vconsole-setup \
> - ${systemd_unitdir}/system/systemd-vconsole-setup.service \
> - ${systemd_unitdir}/system/sysinit.target.wants/systemd-vconsole-setup.service"
> -
> -RRECOMMENDS_${PN}-vconsole-setup = "kbd kbd-consolefonts"
> -
> -CONFFILES_${PN} = "${sysconfdir}/systemd/journald.conf \
> - ${sysconfdir}/systemd/logind.conf \
> - ${sysconfdir}/systemd/system.conf \
> - ${sysconfdir}/systemd/user.conf"
> -
> -FILES_${PN} = " ${base_bindir}/* \
> - ${datadir}/dbus-1/services \
> - ${datadir}/dbus-1/system-services \
> - ${datadir}/polkit-1 \
> - ${datadir}/${PN} \
> - ${sysconfdir}/bash_completion.d/ \
> - ${sysconfdir}/binfmt.d/ \
> - ${sysconfdir}/dbus-1/ \
> - ${sysconfdir}/machine-id \
> - ${sysconfdir}/modules-load.d/ \
> - ${sysconfdir}/sysctl.d/ \
> - ${sysconfdir}/systemd/ \
> - ${sysconfdir}/tmpfiles.d/ \
> - ${sysconfdir}/xdg/ \
> - ${sysconfdir}/init.d/README \
> - ${systemd_unitdir}/* \
> - ${systemd_unitdir}/system/* \
> - /lib/udev/rules.d/99-systemd.rules \
> - ${base_libdir}/security/*.so \
> - /cgroup \
> - ${bindir}/systemd* \
> - ${bindir}/localectl \
> - ${bindir}/hostnamectl \
> - ${bindir}/timedatectl \
> - ${exec_prefix}/lib/tmpfiles.d/*.conf \
> - ${exec_prefix}/lib/systemd \
> - ${exec_prefix}/lib/binfmt.d \
> - ${exec_prefix}/lib/modules-load.d \
> - ${exec_prefix}/lib/sysctl.d \
> - ${localstatedir} \
> - ${libexecdir} \
> - /lib/udev/rules.d/70-uaccess.rules \
> - /lib/udev/rules.d/71-seat.rules \
> - /lib/udev/rules.d/73-seat-late.rules \
> - /lib/udev/rules.d/99-systemd.rules \
> - "
> -FILES_${PN}-dbg += "${systemd_unitdir}/.debug ${systemd_unitdir}/*/.debug ${base_libdir}/security/.debug/ ${PYTHON_SITEPACKAGES_DIR}/systemd/.debug/"
> -FILES_${PN}-dev += "${base_libdir}/security/*.la ${datadir}/dbus-1/interfaces/ ${sysconfdir}/rpm/macros.systemd ${PYTHON_SITEPACKAGES_DIR}/systemd/*.la"
> -
> -RDEPENDS_${PN} += "udev-systemd"
> -
> -# kbd -> loadkeys,setfont
> -# systemd calls 'modprobe -sab --', which busybox doesn't support due to lack
> -# of blacklist support, so use proper modprobe from module-init-tools
> -# And pull in the kernel modules mentioned in INSTALL
> -# swapon -p is also not supported by busybox
> -# busybox mount is broken
> -RRECOMMENDS_${PN} += "systemd-serialgetty \
> - util-linux-agetty \
> - util-linux-swaponoff \
> - util-linux-fsck e2fsprogs-e2fsck \
> - module-init-tools \
> - util-linux-mount util-linux-umount \
> - kernel-module-autofs4 kernel-module-unix kernel-module-ipv6 \
> -"
> -
> -PACKAGES =+ "udev-dbg udev udev-consolekit udev-utils udev-systemd"
> -
> -FILES_udev-dbg += "/lib/udev/.debug"
> -
> -RDEPENDS_udev += "udev-utils"
> -RPROVIDES_udev = "hotplug"
> -
> -FILES_udev += "${base_sbindir}/udevd \
> - /lib/udev/udevd \
> - /lib/systemd/systemd-udevd \
> - /lib/udev/accelerometer \
> - /lib/udev/ata_id \
> - /lib/udev/cdrom_id \
> - /lib/udev/collect \
> - /lib/udev/findkeyboards \
> - /lib/udev/keyboard-force-release.sh \
> - /lib/udev/keymap \
> - /lib/udev/mtd_probe \
> - /lib/udev/scsi_id \
> - /lib/udev/v4l_id \
> - /lib/udev/keymaps \
> - /lib/udev/rules.d/4*.rules \
> - /lib/udev/rules.d/5*.rules \
> - /lib/udev/rules.d/6*.rules \
> - /lib/udev/rules.d/70-power-switch.rules \
> - /lib/udev/rules.d/75*.rules \
> - /lib/udev/rules.d/78*.rules \
> - /lib/udev/rules.d/8*.rules \
> - /lib/udev/rules.d/95*.rules \
> - /lib/udev/hwdb.d \
> - ${sysconfdir}/udev \
> - "
> -
> -FILES_udev-consolekit += "/lib/ConsoleKit"
> -RDEPENDS_udev-consolekit += "${@base_contains('DISTRO_FEATURES', 'x11', 'consolekit', '', d)}"
> -
> -FILES_udev-utils = "${bindir}/udevadm"
> -
> -FILES_udev-systemd = "${systemd_unitdir}/system/*udev* ${systemd_unitdir}/system/*.wants/*udev*"
> -RDEPENDS_udev-systemd = "udev"
> -
> -# TODO:
> -# u-a for runlevel and telinit
> -
> -pkg_postinst_systemd () {
> -update-alternatives --install ${base_sbindir}/init init ${systemd_unitdir}/systemd 300
> -update-alternatives --install ${base_sbindir}/halt halt ${base_bindir}/systemctl 300
> -update-alternatives --install ${base_sbindir}/reboot reboot ${base_bindir}/systemctl 300
> -update-alternatives --install ${base_sbindir}/shutdown shutdown ${base_bindir}/systemctl 300
> -update-alternatives --install ${base_sbindir}/poweroff poweroff ${base_bindir}/systemctl 300
> -}
> -
> -pkg_prerm_systemd () {
> -update-alternatives --remove init ${systemd_unitdir}/systemd
> -update-alternatives --remove halt ${base_bindir}/systemctl
> -update-alternatives --remove reboot ${base_bindir}/systemctl
> -update-alternatives --remove shutdown ${base_bindir}/systemctl
> -update-alternatives --remove poweroff ${base_bindir}/systemctl
> -}
> --
> 1.7.6.5
>
>
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel at lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
--
Martin 'JaMa' Jansa jabber: Martin.Jansa at gmail.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: Digital signature
URL: <http://lists.openembedded.org/pipermail/openembedded-devel/attachments/20130128/f7014218/attachment-0002.sig>
More information about the Openembedded-devel
mailing list