[oe] [meta-handheld][PATCH 5/5] linux-yocto_3.8: initial commit for Zaurus devices
Andrea Adami
andrea.adami at gmail.com
Sun Mar 17 23:17:18 UTC 2013
* NOTE about collie
* collie can be only booted with serial cable
* because framebuffer is still borked.
* Collie is still lacking the spi_locomo for boot from MMC/SD
*
* Most patches have been taken from previous version or from
* LAKML
Signed-off-by: Andrea Adami <andrea.adami at gmail.com>
---
.../linux/linux-yocto-3.8/akita/akita-standard.scc | 7 +
.../linux/linux-yocto-3.8/akita/akita.cfg | 4 +
.../linux/linux-yocto-3.8/akita/akita.scc | 11 +
.../linux/linux-yocto-3.8/c7x0/c7x0-standard.scc | 7 +
recipes-kernel/linux/linux-yocto-3.8/c7x0/c7x0.cfg | 52 +++
recipes-kernel/linux/linux-yocto-3.8/c7x0/c7x0.scc | 8 +
.../linux/linux-yocto-3.8/collie-eraseinfo.patch | 31 ++
.../linux/linux-yocto-3.8/collie-jedec-probe.patch | 11 +
.../linux-yocto-3.8/collie/collie-standard.scc | 7 +
.../linux/linux-yocto-3.8/collie/collie.cfg | 118 ++++++
.../linux/linux-yocto-3.8/collie/collie.scc | 8 +
.../linux/linux-yocto-3.8/feature-top.scc | 1 +
.../linux-yocto-3.8/locomo_kbd_tweak-r2.patch | 75 ++++
.../linux/linux-yocto-3.8/mcp-device.patch | 13 +
.../linux-yocto-3.8/poodle/poodle-standard.scc | 7 +
.../linux/linux-yocto-3.8/poodle/poodle.cfg | 57 +++
.../linux/linux-yocto-3.8/poodle/poodle.scc | 8 +
.../linux/linux-yocto-3.8/pxa27x-sa1100-rtc.patch | 34 ++
.../linux/linux-yocto-3.8/sharpsl_param.patch | 24 ++
.../linux/linux-yocto-3.8/spi-pxa2xx-fix-mem.patch | 34 ++
.../linux/linux-yocto-3.8/spitz/spitz-standard.scc | 7 +
.../linux/linux-yocto-3.8/spitz/spitz.cfg | 61 ++++
.../linux/linux-yocto-3.8/spitz/spitz.scc | 10 +
.../linux/linux-yocto-3.8/spitz_pm.patch | 53 +++
.../linux/linux-yocto-3.8/tosa/tosa-standard.scc | 7 +
recipes-kernel/linux/linux-yocto-3.8/tosa/tosa.cfg | 57 +++
recipes-kernel/linux/linux-yocto-3.8/tosa/tosa.scc | 8 +
.../linux/linux-yocto-3.8/zaurus-common.scc | 10 +
.../linux/linux-yocto-3.8/zaurus-hardware.cfg | 279 ++++++++++++++
.../linux/linux-yocto-3.8/zaurus-non-hardware.cfg | 400 +++++++++++++++++++++
.../linux-yocto-3.8/zaurus-pxa-common-non-hw.cfg | 9 +
.../linux/linux-yocto-3.8/zaurus-pxa-common.cfg | 111 ++++++
.../linux/linux-yocto-3.8/zaurus-pxa-only.scc | 2 +
.../linux/linux-yocto-3.8/zaurus-usb-host.scc | 6 +
.../linux-yocto-3.8/zaurus-usb-ohci-non-hw.cfg | 4 +
.../linux/linux-yocto-3.8/zaurus-usb-ohci.cfg | 110 ++++++
recipes-kernel/linux/linux-yocto_3.8.bbappend | 54 +++
37 files changed, 1705 insertions(+)
create mode 100644 recipes-kernel/linux/linux-yocto-3.8/REGULATORS
create mode 100644 recipes-kernel/linux/linux-yocto-3.8/akita/akita-standard.scc
create mode 100644 recipes-kernel/linux/linux-yocto-3.8/akita/akita.cfg
create mode 100644 recipes-kernel/linux/linux-yocto-3.8/akita/akita.scc
create mode 100644 recipes-kernel/linux/linux-yocto-3.8/c7x0/c7x0-standard.scc
create mode 100644 recipes-kernel/linux/linux-yocto-3.8/c7x0/c7x0.cfg
create mode 100644 recipes-kernel/linux/linux-yocto-3.8/c7x0/c7x0.scc
create mode 100644 recipes-kernel/linux/linux-yocto-3.8/collie-eraseinfo.patch
create mode 100644 recipes-kernel/linux/linux-yocto-3.8/collie-jedec-probe.patch
create mode 100644 recipes-kernel/linux/linux-yocto-3.8/collie/collie-standard.scc
create mode 100644 recipes-kernel/linux/linux-yocto-3.8/collie/collie.cfg
create mode 100644 recipes-kernel/linux/linux-yocto-3.8/collie/collie.scc
create mode 100644 recipes-kernel/linux/linux-yocto-3.8/feature-top.scc
create mode 100644 recipes-kernel/linux/linux-yocto-3.8/locomo_kbd_tweak-r2.patch
create mode 100644 recipes-kernel/linux/linux-yocto-3.8/mcp-device.patch
create mode 100644 recipes-kernel/linux/linux-yocto-3.8/poodle/poodle-standard.scc
create mode 100644 recipes-kernel/linux/linux-yocto-3.8/poodle/poodle.cfg
create mode 100644 recipes-kernel/linux/linux-yocto-3.8/poodle/poodle.scc
create mode 100644 recipes-kernel/linux/linux-yocto-3.8/pxa27x-sa1100-rtc.patch
create mode 100644 recipes-kernel/linux/linux-yocto-3.8/sharpsl_param.patch
create mode 100644 recipes-kernel/linux/linux-yocto-3.8/spi-pxa2xx-fix-mem.patch
create mode 100644 recipes-kernel/linux/linux-yocto-3.8/spitz/spitz-standard.scc
create mode 100644 recipes-kernel/linux/linux-yocto-3.8/spitz/spitz.cfg
create mode 100644 recipes-kernel/linux/linux-yocto-3.8/spitz/spitz.scc
create mode 100644 recipes-kernel/linux/linux-yocto-3.8/spitz_pm.patch
create mode 100644 recipes-kernel/linux/linux-yocto-3.8/tosa/tosa-standard.scc
create mode 100644 recipes-kernel/linux/linux-yocto-3.8/tosa/tosa.cfg
create mode 100644 recipes-kernel/linux/linux-yocto-3.8/tosa/tosa.scc
create mode 100644 recipes-kernel/linux/linux-yocto-3.8/zaurus-common.scc
create mode 100644 recipes-kernel/linux/linux-yocto-3.8/zaurus-hardware.cfg
create mode 100644 recipes-kernel/linux/linux-yocto-3.8/zaurus-non-hardware.cfg
create mode 100644 recipes-kernel/linux/linux-yocto-3.8/zaurus-pxa-common-non-hw.cfg
create mode 100644 recipes-kernel/linux/linux-yocto-3.8/zaurus-pxa-common.cfg
create mode 100644 recipes-kernel/linux/linux-yocto-3.8/zaurus-pxa-only.scc
create mode 100644 recipes-kernel/linux/linux-yocto-3.8/zaurus-usb-host.scc
create mode 100644 recipes-kernel/linux/linux-yocto-3.8/zaurus-usb-ohci-non-hw.cfg
create mode 100644 recipes-kernel/linux/linux-yocto-3.8/zaurus-usb-ohci.cfg
create mode 100644 recipes-kernel/linux/linux-yocto_3.8.bbappend
diff --git a/recipes-kernel/linux/linux-yocto-3.8/REGULATORS b/recipes-kernel/linux/linux-yocto-3.8/REGULATORS
new file mode 100644
index 0000000..e69de29
diff --git a/recipes-kernel/linux/linux-yocto-3.8/akita/akita-standard.scc b/recipes-kernel/linux/linux-yocto-3.8/akita/akita-standard.scc
new file mode 100644
index 0000000..21096d0
--- /dev/null
+++ b/recipes-kernel/linux/linux-yocto-3.8/akita/akita-standard.scc
@@ -0,0 +1,7 @@
+define KMACHINE akita
+define KTYPE standard
+define KARCH arm
+
+include ktypes/standard/standard.scc
+
+include akita.scc
diff --git a/recipes-kernel/linux/linux-yocto-3.8/akita/akita.cfg b/recipes-kernel/linux/linux-yocto-3.8/akita/akita.cfg
new file mode 100644
index 0000000..f6eb8f2
--- /dev/null
+++ b/recipes-kernel/linux/linux-yocto-3.8/akita/akita.cfg
@@ -0,0 +1,4 @@
+#
+# System Type
+#
+CONFIG_GPIO_PCA953X=y
diff --git a/recipes-kernel/linux/linux-yocto-3.8/akita/akita.scc b/recipes-kernel/linux/linux-yocto-3.8/akita/akita.scc
new file mode 100644
index 0000000..e1549ef
--- /dev/null
+++ b/recipes-kernel/linux/linux-yocto-3.8/akita/akita.scc
@@ -0,0 +1,11 @@
+kconf hardware ../spitz/spitz.cfg
+kconf hardware akita.cfg
+
+include ../zaurus-pxa-only.scc
+include ../zaurus-common.scc
+include ../zaurus-usb-host.scc
+
+patch sharpsl_param.patch
+patch spitz_pm.patch
+patch pxa27x-sa1100-rtc.patch
+patch spi-pxa2xx-fix-mem.patch
diff --git a/recipes-kernel/linux/linux-yocto-3.8/c7x0/c7x0-standard.scc b/recipes-kernel/linux/linux-yocto-3.8/c7x0/c7x0-standard.scc
new file mode 100644
index 0000000..325c7c7
--- /dev/null
+++ b/recipes-kernel/linux/linux-yocto-3.8/c7x0/c7x0-standard.scc
@@ -0,0 +1,7 @@
+define KMACHINE c7x0
+define KTYPE standard
+define KARCH arm
+
+include ktypes/standard/standard.scc
+
+include c7x0.scc
diff --git a/recipes-kernel/linux/linux-yocto-3.8/c7x0/c7x0.cfg b/recipes-kernel/linux/linux-yocto-3.8/c7x0/c7x0.cfg
new file mode 100644
index 0000000..7da7c19
--- /dev/null
+++ b/recipes-kernel/linux/linux-yocto-3.8/c7x0/c7x0.cfg
@@ -0,0 +1,52 @@
+#
+# End-user Products (sorted by vendor name)
+#
+CONFIG_MACH_CORGI=y
+CONFIG_MACH_SHEPHERD=y
+CONFIG_MACH_HUSKY=y
+CONFIG_PXA25x=y
+CONFIG_PXA_SHARP_C7xx=y
+CONFIG_SHARPSL_PM=y
+CONFIG_SHARPSL_PM_MAX1111=y
+
+#
+# Boot options
+#
+CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 loglevel=3"
+
+#
+# Disk-On-Chip Device Drivers
+#
+CONFIG_MTD_NAND_SHARPSL=y
+
+#
+# Input Device Drivers
+#
+CONFIG_KEYBOARD_MATRIX=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_W100=y
+CONFIG_LCD_CORGI=y
+CONFIG_BACKLIGHT_GENERIC=y
+
+#
+# Console display driver support
+#
+CONFIG_FONT_8x16=y
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_PXA25X=m
+CONFIG_SND_PXA2XX_SOC_I2S=m
+CONFIG_SND_PXA2XX_SOC_CORGI=m
+CONFIG_SND_SOC_WM8731=m
diff --git a/recipes-kernel/linux/linux-yocto-3.8/c7x0/c7x0.scc b/recipes-kernel/linux/linux-yocto-3.8/c7x0/c7x0.scc
new file mode 100644
index 0000000..99b1d12
--- /dev/null
+++ b/recipes-kernel/linux/linux-yocto-3.8/c7x0/c7x0.scc
@@ -0,0 +1,8 @@
+kconf hardware c7x0.cfg
+
+include ../zaurus-pxa-only.scc
+include ../zaurus-common.scc
+
+patch sharpsl_param.patch
+patch spi-pxa2xx-fix-mem.patch
+
diff --git a/recipes-kernel/linux/linux-yocto-3.8/collie-eraseinfo.patch b/recipes-kernel/linux/linux-yocto-3.8/collie-eraseinfo.patch
new file mode 100644
index 0000000..6aba29e
--- /dev/null
+++ b/recipes-kernel/linux/linux-yocto-3.8/collie-eraseinfo.patch
@@ -0,0 +1,31 @@
+--- a/drivers/mtd/chips/jedec_probe.c
++++ b/drivers/mtd/chips/jedec_probe.c
+@@ -120,7 +120,7 @@
+ #define PM49FL008 0x006A
+
+ /* Sharp */
+-#define LH28F640BF 0x00b0
++#define LH28F640BF 0x00B0
+
+ /* ST - www.st.com */
+ #define M29F800AB 0x0058
+@@ -1299,13 +1299,14 @@
+ .mfr_id = CFI_MFR_SHARP,
+ .dev_id = LH28F640BF,
+ .name = "LH28F640BF",
+- .devtypes = CFI_DEVICETYPE_X8,
++ .devtypes = CFI_DEVICETYPE_X16,
+ .uaddr = MTD_UADDR_UNNECESSARY,
+- .dev_size = SIZE_4MiB,
+- .cmd_set = P_ID_INTEL_STD,
+- .nr_regions = 1,
++ .dev_size = SIZE_8MiB,
++ .cmd_set = P_ID_INTEL_EXT,
++ .nr_regions = 2,
+ .regions = {
+- ERASEINFO(0x40000,16),
++ ERASEINFO(0x10000, 127),
++ ERASEINFO(0x02000, 8),
+ }
+ }, {
+ .mfr_id = CFI_MFR_SST,
diff --git a/recipes-kernel/linux/linux-yocto-3.8/collie-jedec-probe.patch b/recipes-kernel/linux/linux-yocto-3.8/collie-jedec-probe.patch
new file mode 100644
index 0000000..530643e
--- /dev/null
+++ b/recipes-kernel/linux/linux-yocto-3.8/collie-jedec-probe.patch
@@ -0,0 +1,11 @@
+--- a/arch/arm/mach-sa1100/collie.c
++++ b/arch/arm/mach-sa1100/collie.c
+@@ -289,7 +289,7 @@
+ }
+
+ static struct flash_platform_data collie_flash_data = {
+- .map_name = "cfi_probe",
++ .map_name = "jedec_probe",
+ .init = collie_flash_init,
+ .set_vpp = collie_set_vpp,
+ .exit = collie_flash_exit,
diff --git a/recipes-kernel/linux/linux-yocto-3.8/collie/collie-standard.scc b/recipes-kernel/linux/linux-yocto-3.8/collie/collie-standard.scc
new file mode 100644
index 0000000..7283ad9
--- /dev/null
+++ b/recipes-kernel/linux/linux-yocto-3.8/collie/collie-standard.scc
@@ -0,0 +1,7 @@
+define KMACHINE collie
+define KTYPE standard
+define KARCH arm
+
+include ktypes/standard/standard.scc
+
+include collie.scc
diff --git a/recipes-kernel/linux/linux-yocto-3.8/collie/collie.cfg b/recipes-kernel/linux/linux-yocto-3.8/collie/collie.cfg
new file mode 100644
index 0000000..c334774
--- /dev/null
+++ b/recipes-kernel/linux/linux-yocto-3.8/collie/collie.cfg
@@ -0,0 +1,118 @@
+#
+# System Type
+#
+CONFIG_ARCH_SA1100=y
+
+#
+# SA11x0 Implementations
+#
+CONFIG_SA1100_COLLIE=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_SA1100=y
+CONFIG_CPU_32v4=y
+CONFIG_CPU_ABRT_EV4=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_V4WB=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WB=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_CPU_USE_DOMAINS=y
+
+#
+# Processor Features
+#
+CONFIG_SHARP_LOCOMO=y
+
+#
+# PC-card bridges
+#
+CONFIG_PCMCIA_SA11XX_BASE=y
+CONFIG_PCMCIA_SA1100=y
+
+#
+# Kernel Features
+#
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_EXTREME=y
+
+#
+# Boot options
+#
+CONFIG_CMDLINE="console=ttySA0,115200n8 console=tty1 mem=64M fbcon=rotate:1 loglevel=3"
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+CONFIG_MTD_CFI_I2=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_UTIL=y
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_SA1100=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SA1100=y
+CONFIG_SERIAL_SA1100_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+
+#
+# Multimedia Capabilities Port drivers
+#
+CONFIG_MCP=y
+CONFIG_MCP_SA11X0=y
+CONFIG_MCP_UCB1200=y
+CONFIG_MCP_UCB1200_TS=y
+
+#
+# Input Device Drivers
+#
+CONFIG_KEYBOARD_LOCOMO=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=240
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_SA1100=y
+CONFIG_BACKLIGHT_LOCOMO=y
+
+#
+# Console display driver support
+#
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_FONT_8x8=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_LOCOMO=y
+
+#
+# MODULbus GPIO expanders:
+#
+CONFIG_BATTERY_COLLIE=y
diff --git a/recipes-kernel/linux/linux-yocto-3.8/collie/collie.scc b/recipes-kernel/linux/linux-yocto-3.8/collie/collie.scc
new file mode 100644
index 0000000..3f96f24
--- /dev/null
+++ b/recipes-kernel/linux/linux-yocto-3.8/collie/collie.scc
@@ -0,0 +1,8 @@
+kconf hardware collie.cfg
+
+include ../zaurus-common.scc
+
+patch locomo_kbd_tweak-r2.patch
+patch mcp-device.patch
+patch collie-jedec-probe.patch
+patch collie-eraseinfo.patch
diff --git a/recipes-kernel/linux/linux-yocto-3.8/feature-top.scc b/recipes-kernel/linux/linux-yocto-3.8/feature-top.scc
new file mode 100644
index 0000000..fdffa2a
--- /dev/null
+++ b/recipes-kernel/linux/linux-yocto-3.8/feature-top.scc
@@ -0,0 +1 @@
+# placeholder
diff --git a/recipes-kernel/linux/linux-yocto-3.8/locomo_kbd_tweak-r2.patch b/recipes-kernel/linux/linux-yocto-3.8/locomo_kbd_tweak-r2.patch
new file mode 100644
index 0000000..5f015f4
--- /dev/null
+++ b/recipes-kernel/linux/linux-yocto-3.8/locomo_kbd_tweak-r2.patch
@@ -0,0 +1,75 @@
+From e60a4a9a3336a24a8e6ca3ea69587c60cb953881 Mon Sep 17 00:00:00 2001
+From: Andrea Adami <andrea.adami at gmail.com>
+Date: Sat, 21 Apr 2012 23:48:57 +0200
+Subject: [PATCH 43/43] locomokbd: apply tweaks for Zaurus
+
+* from http://www.rpsys.net/openzaurus/patches/
+
+Signed-off-by: Richard Purdie <rpurdie at rpsys.net>
+Signed-off-by: Andrea Adami <andrea.adami at gmail.com>
+
+diff --git a/drivers/input/keyboard/locomokbd.c b/drivers/input/keyboard/locomokbd.c
+index c94d610..2b978c8 100644
+--- a/drivers/input/keyboard/locomokbd.c
++++ b/drivers/input/keyboard/locomokbd.c
+@@ -39,27 +39,33 @@ MODULE_AUTHOR("John Lenz <lenz at cs.wisc.edu>");
+ MODULE_DESCRIPTION("LoCoMo keyboard driver");
+ MODULE_LICENSE("GPL");
+
+-#define LOCOMOKBD_NUMKEYS 128
+-
+-#define KEY_ACTIVITY KEY_F16
+-#define KEY_CONTACT KEY_F18
+-#define KEY_CENTER KEY_F15
++#define LOCOMOKBD_NUMKEYS 128
++
++#define LOCOMO_KEY_CALENDER KEY_LEFTCTRL
++#define LOCOMO_KEY_ADDRESS KEY_LEFTALT /* Needed for SysRQ */
++#define LOCOMO_KEY_HOME KEY_SYSRQ /* Needed for SysRQ */
++#define LOCOMO_KEY_MENU KEY_F12
++#define LOCOMO_KEY_MAIL KEY_F10
++#define LOCOMO_KEY_OK KEY_F11 /* Don't hardwire to KEY_RETURN */
++#define LOCOMO_KEY_CANCEL KEY_POWER
++#define LOCOMO_KEY_CENTER KEY_F5 /* Don't hardwire to KEY_RETURN */
++#define LOCOMO_KEY_FN KEY_F9
+
+ static const unsigned char
+ locomokbd_keycode[LOCOMOKBD_NUMKEYS] = {
+- 0, KEY_ESC, KEY_ACTIVITY, 0, 0, 0, 0, 0, 0, 0, /* 0 - 9 */
+- 0, 0, 0, 0, 0, 0, 0, KEY_MENU, KEY_HOME, KEY_CONTACT, /* 10 - 19 */
+- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 20 - 29 */
+- 0, 0, 0, KEY_CENTER, 0, KEY_MAIL, 0, 0, 0, 0, /* 30 - 39 */
+- 0, 0, 0, 0, 0, 0, 0, 0, 0, KEY_RIGHT, /* 40 - 49 */
+- KEY_UP, KEY_LEFT, 0, 0, KEY_P, 0, KEY_O, KEY_I, KEY_Y, KEY_T, /* 50 - 59 */
+- KEY_E, KEY_W, 0, 0, 0, 0, KEY_DOWN, KEY_ENTER, 0, 0, /* 60 - 69 */
+- KEY_BACKSPACE, 0, KEY_L, KEY_U, KEY_H, KEY_R, KEY_D, KEY_Q, 0, 0, /* 70 - 79 */
+- 0, 0, 0, 0, 0, 0, KEY_ENTER, KEY_RIGHTSHIFT, KEY_K, KEY_J, /* 80 - 89 */
+- KEY_G, KEY_F, KEY_X, KEY_S, 0, 0, 0, 0, 0, 0, /* 90 - 99 */
+- 0, 0, KEY_DOT, 0, KEY_COMMA, KEY_N, KEY_B, KEY_C, KEY_Z, KEY_A, /* 100 - 109 */
+- KEY_LEFTSHIFT, KEY_TAB, KEY_LEFTCTRL, 0, 0, 0, 0, 0, 0, 0, /* 110 - 119 */
+- KEY_M, KEY_SPACE, KEY_V, KEY_APOSTROPHE, KEY_SLASH, 0, 0, 0 /* 120 - 128 */
++ 0, LOCOMO_KEY_CANCEL, LOCOMO_KEY_CALENDER, LOCOMO_KEY_HOME, 0, 0, 0, 0, 0, 0, /* 0 - 9 */
++ 0, 0, 0, 0, 0, 0, 0, LOCOMO_KEY_MENU, 0, LOCOMO_KEY_ADDRESS, /* 10 - 19 */
++ 0, 0, 0, 0, 0, LOCOMO_KEY_MAIL, 0, 0, 0, 0, /* 20 - 29 */
++ 0, 0, 0, LOCOMO_KEY_CENTER, 0, LOCOMO_KEY_MAIL, 0, 0, 0, 0, /* 30 - 39 */
++ 0, 0, 0, 0, 0, 0, 0, 0, 0, KEY_RIGHT, /* 40 - 49 */
++ KEY_UP, KEY_LEFT, 0, 0, KEY_P, 0, KEY_O, KEY_I, KEY_Y, KEY_T, /* 50 - 59 */
++ KEY_E, KEY_W, 0, 0, 0, 0, KEY_DOWN, LOCOMO_KEY_OK, 0, 0, /* 60 - 69 */
++ KEY_BACKSPACE, 0, KEY_L, KEY_U, KEY_H, KEY_R, KEY_D, KEY_Q, 0, 0, /* 70 - 79 */
++ 0, 0, 0, 0, 0, 0, KEY_ENTER, KEY_RIGHTSHIFT, KEY_K, KEY_J, /* 80 - 89 */
++ KEY_G, KEY_F, KEY_X, KEY_S, 0, 0, 0, 0, 0, 0, /* 90 - 99 */
++ 0, 0, KEY_DOT, 0, KEY_COMMA, KEY_N, KEY_B, KEY_C, KEY_Z, KEY_A, /* 100 - 109 */
++ KEY_LEFTSHIFT, KEY_TAB, LOCOMO_KEY_FN, 0, 0, 0, 0, 0, 0, 0, /* 110 - 119 */
++ KEY_M, KEY_SPACE, KEY_V, KEY_APOSTROPHE, KEY_SLASH, 0, 0, 0 /* 120 - 128 */
+ };
+
+ #define KB_ROWS 16
+@@ -68,7 +74,7 @@ locomokbd_keycode[LOCOMOKBD_NUMKEYS] = {
+ #define SCANCODE(c,r) ( ((c)<<4) + (r) + 1 )
+
+ #define KB_DELAY 8
+-#define SCAN_INTERVAL (HZ/10)
++#define SCAN_INTERVAL (HZ/20)
+
+ struct locomokbd {
+ unsigned char keycode[LOCOMOKBD_NUMKEYS];
diff --git a/recipes-kernel/linux/linux-yocto-3.8/mcp-device.patch b/recipes-kernel/linux/linux-yocto-3.8/mcp-device.patch
new file mode 100644
index 0000000..9a0a8ba
--- /dev/null
+++ b/recipes-kernel/linux/linux-yocto-3.8/mcp-device.patch
@@ -0,0 +1,13 @@
+--- a/include/linux/mfd/mcp.h 2013-02-18 00:14:09.000000000 +0100
++++ b/include/linux/mfd/mcp.h 2013-02-17 23:55:52.000000000 +0100
+@@ -10,6 +10,8 @@
+ #ifndef MCP_H
+ #define MCP_H
+
++#include <linux/device.h>
++
+ struct mcp_ops;
+
+ struct mcp {
+
+
diff --git a/recipes-kernel/linux/linux-yocto-3.8/poodle/poodle-standard.scc b/recipes-kernel/linux/linux-yocto-3.8/poodle/poodle-standard.scc
new file mode 100644
index 0000000..31ad9df
--- /dev/null
+++ b/recipes-kernel/linux/linux-yocto-3.8/poodle/poodle-standard.scc
@@ -0,0 +1,7 @@
+define KMACHINE poodle
+define KTYPE standard
+define KARCH arm
+
+include ktypes/standard/standard.scc
+
+include poodle.scc
diff --git a/recipes-kernel/linux/linux-yocto-3.8/poodle/poodle.cfg b/recipes-kernel/linux/linux-yocto-3.8/poodle/poodle.cfg
new file mode 100644
index 0000000..8ae5c8e
--- /dev/null
+++ b/recipes-kernel/linux/linux-yocto-3.8/poodle/poodle.cfg
@@ -0,0 +1,57 @@
+#
+# Processor Features
+#
+CONFIG_SHARP_LOCOMO=y
+
+#
+# End-user Products (sorted by vendor name)
+#
+CONFIG_MACH_POODLE=y
+CONFIG_PXA25x=y
+
+#
+# Boot options
+#
+CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 fbcon=rotate:1 loglevel=3"
+
+#
+# Disk-On-Chip Device Drivers
+#
+CONFIG_MTD_NAND_SHARPSL=y
+
+#
+# Input Device Drivers
+#
+CONFIG_KEYBOARD_LOCOMO=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=240
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_PXA=y
+CONFIG_BACKLIGHT_LOCOMO=y
+
+#
+# Console display driver support
+#
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_FONT_8x8=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_LOCOMO=y
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_PXA25X=m
+CONFIG_SND_PXA2XX_SOC_I2S=m
+CONFIG_SND_PXA2XX_SOC_POODLE=m
+CONFIG_SND_SOC_WM8731=m
diff --git a/recipes-kernel/linux/linux-yocto-3.8/poodle/poodle.scc b/recipes-kernel/linux/linux-yocto-3.8/poodle/poodle.scc
new file mode 100644
index 0000000..1dd2144
--- /dev/null
+++ b/recipes-kernel/linux/linux-yocto-3.8/poodle/poodle.scc
@@ -0,0 +1,8 @@
+kconf hardware poodle.cfg
+
+include ../zaurus-pxa-only.scc
+include ../zaurus-common.scc
+
+patch locomo_kbd_tweak-r2.patch
+patch sharpsl_param.patch
+patch spi-pxa2xx-fix-mem.patch
diff --git a/recipes-kernel/linux/linux-yocto-3.8/pxa27x-sa1100-rtc.patch b/recipes-kernel/linux/linux-yocto-3.8/pxa27x-sa1100-rtc.patch
new file mode 100644
index 0000000..7cb5385
--- /dev/null
+++ b/recipes-kernel/linux/linux-yocto-3.8/pxa27x-sa1100-rtc.patch
@@ -0,0 +1,34 @@
+From fcee0050f8ce5296e8007ed7ed17d98f334a8f38 Mon Sep 17 00:00:00 2001
+From: Andrea Adami <andrea.adami at gmail.com>
+Date: Fri, 23 Nov 2012 23:07:20 +0100
+Subject: [PATCH] ARM: pxa: pxa27x.c: add dummy SA1100 rtc clock
+
+* Using pxa27x you could now build both RTC_DRV_PXA and RTC_DRV_SA1100.
+* Make sure you don't use both together: link /dev/rtc0 or /dev/rtc1
+* to /dev/rtc according to your requirement.
+
+Signed-off-by: Andrea Adami <andrea.adami at gmail.com>
+Acked-by: Robert Jarzmik <robert.jarzmik at free.fr>
+Signed-off-by: Haojian Zhuang <haojian.zhuang at gmail.com>
+
+Upstream-Status: Accepted. Committed in v3.9-rc1
+with commit id 495b21dc0e488b784ab1d4007d00db1ca2a95c98
+---
+ arch/arm/mach-pxa/pxa27x.c | 1 +
+ 1 files changed, 1 insertions(+), 0 deletions(-)
+
+diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
+index 8047ee0..5970ebc 100644
+--- a/arch/arm/mach-pxa/pxa27x.c
++++ b/arch/arm/mach-pxa/pxa27x.c
+@@ -230,6 +230,7 @@ static struct clk_lookup pxa27x_clkregs[] = {
+ INIT_CLKREG(&clk_pxa27x_memc, NULL, "MEMCLK"),
+ INIT_CLKREG(&clk_pxa27x_mem, "pxa2xx-pcmcia", NULL),
+ INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL),
++ INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
+ };
+
+ #ifdef CONFIG_PM
+--
+1.7.8.6
+
diff --git a/recipes-kernel/linux/linux-yocto-3.8/sharpsl_param.patch b/recipes-kernel/linux/linux-yocto-3.8/sharpsl_param.patch
new file mode 100644
index 0000000..c626e92
--- /dev/null
+++ b/recipes-kernel/linux/linux-yocto-3.8/sharpsl_param.patch
@@ -0,0 +1,24 @@
+Signed-off-by: Marko Katic <dromede.gmail.com>
+
+diff --git a/arch/arm/common/sharpsl_param.c b/arch/arm/common/sharpsl_param.c
+index d56c932..b70b13a 100644
+--- a/arch/arm/common/sharpsl_param.c
++++ b/arch/arm/common/sharpsl_param.c
+@@ -14,6 +14,7 @@
+ #include <linux/kernel.h>
+ #include <linux/module.h>
+ #include <linux/string.h>
++#include <asm/memory.h>
+ #include <asm/mach/sharpsl_param.h>
+
+ /*
+@@ -41,7 +42,8 @@ EXPORT_SYMBOL(sharpsl_param);
+
+ void sharpsl_save_param(void)
+ {
+- memcpy(&sharpsl_param, (void *)PARAM_BASE, sizeof(struct sharpsl_param_info));
++ void * param_start = phys_to_virt(PARAM_BASE);
++ memcpy(&sharpsl_param, param_start, sizeof(struct sharpsl_param_info));
+
+ if (sharpsl_param.comadj_keyword != COMADJ_MAGIC)
+ sharpsl_param.comadj=-1;
diff --git a/recipes-kernel/linux/linux-yocto-3.8/spi-pxa2xx-fix-mem.patch b/recipes-kernel/linux/linux-yocto-3.8/spi-pxa2xx-fix-mem.patch
new file mode 100644
index 0000000..e20b597
--- /dev/null
+++ b/recipes-kernel/linux/linux-yocto-3.8/spi-pxa2xx-fix-mem.patch
@@ -0,0 +1,34 @@
+diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
+index dc25bee..b25fe27 100644
+--- a/drivers/spi/spi-pxa2xx.c
++++ b/drivers/spi/spi-pxa2xx.c
+@@ -106,6 +106,7 @@ struct driver_data {
+ int rx_channel;
+ int tx_channel;
+ u32 *null_dma_buf;
++ u8 null_dma_buf_unaligned[16];
+
+ /* SSP register addresses */
+ void __iomem *ioaddr;
+@@ -1543,8 +1544,8 @@ static int __devinit pxa2xx_spi_probe(struct platform_device *pdev)
+ return -ENODEV;
+ }
+
+- /* Allocate master with space for drv_data and null dma buffer */
+- master = spi_alloc_master(dev, sizeof(struct driver_data) + 16);
++ /* Allocate master with space for drv_data */
++ master = spi_alloc_master(dev, sizeof(struct driver_data));
+ if (!master) {
+ dev_err(&pdev->dev, "cannot alloc spi_master\n");
+ pxa_ssp_free(ssp);
+@@ -1569,8 +1570,8 @@ static int __devinit pxa2xx_spi_probe(struct platform_device *pdev)
+ master->transfer = transfer;
+
+ drv_data->ssp_type = ssp->type;
+- drv_data->null_dma_buf = (u32 *)ALIGN((u32)(drv_data +
+- sizeof(struct driver_data)), 8);
++ drv_data->null_dma_buf =
++ (u32 *)PTR_ALIGN(&drv_data->null_dma_buf_unaligned, 8);
+
+ drv_data->ioaddr = ssp->mmio_base;
+ drv_data->ssdr_physical = ssp->phys_base + SSDR;
diff --git a/recipes-kernel/linux/linux-yocto-3.8/spitz/spitz-standard.scc b/recipes-kernel/linux/linux-yocto-3.8/spitz/spitz-standard.scc
new file mode 100644
index 0000000..5b8e2c3
--- /dev/null
+++ b/recipes-kernel/linux/linux-yocto-3.8/spitz/spitz-standard.scc
@@ -0,0 +1,7 @@
+define KMACHINE spitz
+define KTYPE standard
+define KARCH arm
+
+include ktypes/standard/standard.scc
+
+include spitz.scc
diff --git a/recipes-kernel/linux/linux-yocto-3.8/spitz/spitz.cfg b/recipes-kernel/linux/linux-yocto-3.8/spitz/spitz.cfg
new file mode 100644
index 0000000..85d5f0f
--- /dev/null
+++ b/recipes-kernel/linux/linux-yocto-3.8/spitz/spitz.cfg
@@ -0,0 +1,61 @@
+#
+# Processor Features
+#
+CONFIG_IWMMXT=y
+
+#
+# End-user Products (sorted by vendor name)
+#
+CONFIG_MACH_AKITA=y
+CONFIG_MACH_SPITZ=y
+CONFIG_MACH_BORZOI=y
+CONFIG_PXA27x=y
+CONFIG_PXA_SHARP_Cxx00=y
+CONFIG_SHARPSL_PM=y
+CONFIG_SHARPSL_PM_MAX1111=y
+
+#
+# Boot options
+#
+CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 fbcon=rotate:1 loglevel=3"
+
+#
+# Disk-On-Chip Device Drivers
+#
+CONFIG_MTD_NAND_SHARPSL=y
+
+#
+# Input Device Drivers
+#
+CONFIG_KEYBOARD_MATRIX=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_PXA=y
+CONFIG_FB_PXA_OVERLAY=y
+CONFIG_FB_PXA_SMARTPANEL=y
+CONFIG_FB_PXA_PARAMETERS=y
+CONFIG_LCD_CORGI=y
+CONFIG_BACKLIGHT_GENERIC=y
+
+#
+# Console display driver support
+#
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_FONT_8x16=y
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_PXA27X=m
+CONFIG_SND_PXA2XX_SOC_I2S=m
+CONFIG_SND_PXA2XX_SOC_SPITZ=m
+CONFIG_SND_SOC_WM8750=m
diff --git a/recipes-kernel/linux/linux-yocto-3.8/spitz/spitz.scc b/recipes-kernel/linux/linux-yocto-3.8/spitz/spitz.scc
new file mode 100644
index 0000000..fe6aac8
--- /dev/null
+++ b/recipes-kernel/linux/linux-yocto-3.8/spitz/spitz.scc
@@ -0,0 +1,10 @@
+kconf hardware spitz.cfg
+
+include ../zaurus-pxa-only.scc
+include ../zaurus-common.scc
+include ../zaurus-usb-host.scc
+
+patch sharpsl_param.patch
+patch spitz_pm.patch
+patch pxa27x-sa1100-rtc.patch
+patch spi-pxa2xx-fix-mem.patch
diff --git a/recipes-kernel/linux/linux-yocto-3.8/spitz_pm.patch b/recipes-kernel/linux/linux-yocto-3.8/spitz_pm.patch
new file mode 100644
index 0000000..34bcb9d
--- /dev/null
+++ b/recipes-kernel/linux/linux-yocto-3.8/spitz_pm.patch
@@ -0,0 +1,53 @@
+Subject: [PATCH] [ARM] pxa/spitz_pm.c: Fix hang under certain conditions when resuming from STR.
+
+Devices that use spitz_pm.c will fail to resume
+from STR (Suspend To Ram) when the charger plug is inserted
+or removed when a device is in STR mode. The culprit is
+a misconfigured gpio line - GPIO18. GPIO18 should be configured as a
+regular GPIO input but it gets configured as an alternate function
+GPIO18_RDY. And then later in postsuspend() it gets configured as
+a regular GPIO18 input line.
+
+Fix this by removing the GPIO18_RDY configuration so that GPIO18
+only gets configured as a regular gpio input.
+
+Signed-off-by: Marko Katic <dromede at gmail.com>
+---
+ arch/arm/mach-pxa/spitz_pm.c | 8 ++------
+ 1 files changed, 2 insertions(+), 6 deletions(-)
+
+diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
+index 438f02f..842596d 100644
+--- a/arch/arm/mach-pxa/spitz_pm.c
++++ b/arch/arm/mach-pxa/spitz_pm.c
+@@ -86,10 +86,7 @@ static void spitz_discharge1(int on)
+ gpio_set_value(SPITZ_GPIO_LED_GREEN, on);
+ }
+
+-static unsigned long gpio18_config[] = {
+- GPIO18_RDY,
+- GPIO18_GPIO,
+-};
++static unsigned long gpio18_config = GPIO18_GPIO;
+
+ static void spitz_presuspend(void)
+ {
+@@ -112,7 +109,7 @@ static void spitz_presuspend(void)
+ PGSR3 &= ~SPITZ_GPIO_G3_STROBE_BIT;
+ PGSR2 |= GPIO_bit(SPITZ_GPIO_KEY_STROBE0);
+
+- pxa2xx_mfp_config(&gpio18_config[0], 1);
++ pxa2xx_mfp_config(&gpio18_config, 1);
+ gpio_request_one(18, GPIOF_OUT_INIT_HIGH, "Unknown");
+ gpio_free(18);
+
+@@ -131,7 +128,6 @@ static void spitz_presuspend(void)
+
+ static void spitz_postsuspend(void)
+ {
+- pxa2xx_mfp_config(&gpio18_config[1], 1);
+ }
+
+ static int spitz_should_wakeup(unsigned int resume_on_alarm)
+--
+1.7.4.1
diff --git a/recipes-kernel/linux/linux-yocto-3.8/tosa/tosa-standard.scc b/recipes-kernel/linux/linux-yocto-3.8/tosa/tosa-standard.scc
new file mode 100644
index 0000000..b2e1324
--- /dev/null
+++ b/recipes-kernel/linux/linux-yocto-3.8/tosa/tosa-standard.scc
@@ -0,0 +1,7 @@
+define KMACHINE tosa
+define KTYPE standard
+define KARCH arm
+
+include ktypes/standard/standard.scc
+
+include tosa.scc
diff --git a/recipes-kernel/linux/linux-yocto-3.8/tosa/tosa.cfg b/recipes-kernel/linux/linux-yocto-3.8/tosa/tosa.cfg
new file mode 100644
index 0000000..d3148f2
--- /dev/null
+++ b/recipes-kernel/linux/linux-yocto-3.8/tosa/tosa.cfg
@@ -0,0 +1,57 @@
+#
+# End-user Products (sorted by vendor name)
+#
+CONFIG_MACH_TOSA=y
+CONFIG_TOSA_BT=m
+CONFIG_PXA25x=y
+
+#
+# Boot options
+#
+CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 loglevel=3"
+
+#
+# Multifunction device drivers
+#
+CONFIG_MFD_CORE=y
+CONFIG_MFD_TMIO=y
+CONFIG_MFD_TC6393XB=y
+
+#
+# Disk-On-Chip Device Drivers
+#
+CONFIG_MTD_NAND_TMIO=y
+
+#
+# Input Device Drivers
+#
+CONFIG_KEYBOARD_MATRIX=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_TMIO=y
+CONFIG_FB_TMIO_ACCELL=y
+CONFIG_LCD_TOSA=y
+CONFIG_BACKLIGHT_GENERIC=y
+CONFIG_BACKLIGHT_TOSA=y
+
+#
+# Console display driver support
+#
+CONFIG_FONT_8x16=y
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_PXA25X=m
+CONFIG_SND_PXA2XX_SOC_AC97=m
+CONFIG_SND_PXA2XX_SOC_TOSA=m
+CONFIG_SND_SOC_WM9712=m
+CONFIG_SND_SOC_AC97_BUS=y
diff --git a/recipes-kernel/linux/linux-yocto-3.8/tosa/tosa.scc b/recipes-kernel/linux/linux-yocto-3.8/tosa/tosa.scc
new file mode 100644
index 0000000..d1f0dbd
--- /dev/null
+++ b/recipes-kernel/linux/linux-yocto-3.8/tosa/tosa.scc
@@ -0,0 +1,8 @@
+kconf hardware tosa.cfg
+
+include ../zaurus-pxa-only.scc
+include ../zaurus-common.scc
+include ../zaurus-usb-host.scc
+
+patch sharpsl_param.patch
+patch spi-pxa2xx-fix-mem.patch
diff --git a/recipes-kernel/linux/linux-yocto-3.8/zaurus-common.scc b/recipes-kernel/linux/linux-yocto-3.8/zaurus-common.scc
new file mode 100644
index 0000000..bc67bd9
--- /dev/null
+++ b/recipes-kernel/linux/linux-yocto-3.8/zaurus-common.scc
@@ -0,0 +1,10 @@
+kconf hardware zaurus-hardware.cfg
+kconf non-hardware zaurus-non-hardware.cfg
+
+include cfg/fs/flash_fs.scc
+include cfg/serial-8250.cfg
+include cfg/sound.scc
+
+include features/scsi/disk.scc
+include features/hostapd/hostapd.scc
+include features/mac80211/mac80211.scc
diff --git a/recipes-kernel/linux/linux-yocto-3.8/zaurus-hardware.cfg b/recipes-kernel/linux/linux-yocto-3.8/zaurus-hardware.cfg
new file mode 100644
index 0000000..6fbc95e
--- /dev/null
+++ b/recipes-kernel/linux/linux-yocto-3.8/zaurus-hardware.cfg
@@ -0,0 +1,279 @@
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_ARM_PATCH_PHYS_VIRT=y
+CONFIG_GENERIC_BUG=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+
+
+#
+# Processor Features
+#
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_ARM_NR_BANKS=8
+CONFIG_SHARP_PARAM=y
+CONFIG_SHARP_SCOOP=y
+
+#
+# Power management options
+#
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_PM_SLEEP=y
+CONFIG_PM_RUNTIME=y
+CONFIG_PM=y
+CONFIG_APM_EMULATION=y
+CONFIG_PM_CLK=y
+CONFIG_CPU_PM=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARM_CPU_SUSPEND=y
+
+#
+# Generic Driver Options
+#
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_ROM=y
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+
+#
+# Disk-On-Chip Device Drivers
+#
+CONFIG_MTD_NAND_ECC=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_IDS=y
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_APMPOWER=y
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_UINPUT=m
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_DEVKMEM=y
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=m
+CONFIG_SERIAL_8250_CS=m
+
+#
+# Non-8250 serial port support
+#
+CONFIG_HW_RANDOM=m
+
+#
+# PCMCIA character devices
+#
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# Other I2C/SMBus bus drivers
+#
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# Enable Device Drivers -> PPS to see the PTP clock options.
+#
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# MODULbus GPIO expanders:
+#
+CONFIG_POWER_SUPPLY=y
+CONFIG_POWER_SUPPLY_DEBUG=y
+CONFIG_PDA_POWER=y
+CONFIG_APM_POWER=y
+CONFIG_HWMON=y
+
+#
+# Native drivers
+#
+CONFIG_SENSORS_MAX1111=y
+
+#
+# USB-based Watchdog Cards
+#
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FONTS=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_JACK=y
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+CONFIG_SND_DRIVERS=y
+CONFIG_SND_ARM=y
+CONFIG_SND_SPI=y
+CONFIG_SND_PCMCIA=y
+CONFIG_SND_SOC=m
+CONFIG_SND_SOC_I2C_AND_SPI=m
+CONFIG_HID=m
+
+#
+# Special HID drivers
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_OTG_WHITELIST=y
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_GADGET=m
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_GADGET_DEBUG_FS=y
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_ETH_EEM=y
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_MASS_STORAGE=m
+CONFIG_USB_G_SERIAL=m
+CONFIG_USB_CDC_COMPOSITE=m
+CONFIG_USB_G_MULTI=m
+CONFIG_USB_G_MULTI_RNDIS=y
+CONFIG_USB_G_MULTI_CDC=y
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SA1100=y
+
+#
+# Kernel hacking
+#
+CONFIG_ARM_UNWIND=y
diff --git a/recipes-kernel/linux/linux-yocto-3.8/zaurus-non-hardware.cfg b/recipes-kernel/linux/linux-yocto-3.8/zaurus-non-hardware.cfg
new file mode 100644
index 0000000..b267978
--- /dev/null
+++ b/recipes-kernel/linux/linux-yocto-3.8/zaurus-non-hardware.cfg
@@ -0,0 +1,400 @@
+CONFIG_KERNEL_LZMA=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+#
+# General setup
+#
+CONFIG_KTIME_SCALAR=y
+
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_IRQ_WORK=y
+
+#
+# General setup
+#
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+CONFIG_DEFAULT_HOSTNAME="(none)"
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+
+#
+# IRQ subsystem
+#
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_SPARSE_IRQ=y
+
+#
+# RCU Subsystem
+#
+CONFIG_TINY_RCU=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_LZO=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_ANON_INODES=y
+CONFIG_EXPERT=y
+CONFIG_UID16=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_PERF_EVENTS=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+
+#
+# GCOV-based kernel profiling
+#
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_BLK_DEV_BSG=y
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+
+#
+# IO Schedulers
+#
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+CONFIG_INLINE_READ_UNLOCK=y
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+CONFIG_INLINE_WRITE_UNLOCK=y
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+
+#
+# Bus support
+#
+CONFIG_PCCARD=y
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+
+#
+# PC-card bridges
+#
+CONFIG_PCMCIA_SOC_COMMON=y
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_HZ=100
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_SPLIT_PTLOCK_CPUS=999999
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE_FROM_BOOTLOADER=y
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# Network testing
+#
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+
+#
+# FIR device drivers
+#
+CONFIG_BT=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIBTSDIO=m
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_ATH3K=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIDTL1=m
+CONFIG_BT_HCIBT3C=m
+CONFIG_BT_HCIBLUECARD=m
+CONFIG_BT_HCIBTUART=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_BT_MRVL=m
+CONFIG_BT_MRVL_SDIO=m
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_SPY=y
+CONFIG_WEXT_PRIV=y
+CONFIG_LIB80211_CRYPT_WEP=m
+CONFIG_LIB80211_CRYPT_CCMP=m
+CONFIG_LIB80211_CRYPT_TKIP=m
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH=""
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+CONFIG_REGMAP=y
+CONFIG_REGMAP_I2C=m
+CONFIG_REGMAP_SPI=m
+
+#
+# LPDDR flash memory drivers
+#
+CONFIG_BLK_DEV=y
+
+#
+# Altera FPGA firmware download module
+#
+CONFIG_HAVE_IDE=y
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+CONFIG_SCSI_DMA=y
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ATA=y
+CONFIG_ATA_VERBOSE_ERROR=y
+CONFIG_SATA_PMP=y
+
+#
+# Controllers with non-SFF native interface
+#
+CONFIG_ATA_SFF=y
+
+#
+# SFF controllers with custom DMA interface
+#
+CONFIG_ATA_BMDMA=y
+
+#
+# PIO-only SFF controllers
+#
+CONFIG_PATA_PCMCIA=y
+
+#
+# CAIF transport drivers
+#
+CONFIG_ETHERNET=y
+CONFIG_NET_VENDOR_3COM=y
+CONFIG_NET_VENDOR_AMD=y
+CONFIG_NET_VENDOR_BROADCOM=y
+CONFIG_NET_VENDOR_CHELSIO=y
+CONFIG_NET_VENDOR_CIRRUS=y
+CONFIG_NET_VENDOR_FARADAY=y
+CONFIG_NET_VENDOR_FUJITSU=y
+CONFIG_NET_VENDOR_INTEL=y
+CONFIG_NET_VENDOR_I825XX=y
+CONFIG_NET_VENDOR_MARVELL=y
+CONFIG_NET_VENDOR_MICREL=y
+CONFIG_NET_VENDOR_MICROCHIP=y
+CONFIG_NET_VENDOR_NATSEMI=y
+CONFIG_NET_VENDOR_8390=y
+CONFIG_PCMCIA_PCNET=m
+CONFIG_NET_VENDOR_SEEQ=y
+CONFIG_NET_VENDOR_SMSC=y
+CONFIG_NET_VENDOR_STMICRO=y
+CONFIG_NET_VENDOR_XIRCOM=y
+CONFIG_SLHC=m
+
+#
+# USB Network Adapters
+#
+CONFIG_AIRO_CS=m
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_CS=m
+
+#
+# Character devices
+#
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE_SLEEP=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_BCMA_POSSIBLE=y
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+CONFIG_USB_GPIO_VBUS=m
+CONFIG_USB_ULPI=y
+CONFIG_NOP_USB_XCEIV=m
+#
+CONFIG_MMC=y
+CONFIG_MMC_UNSAFE_RESUME=y
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_MINORS=8
+CONFIG_MMC_BLOCK_BOUNCE=y
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SPI=y
+
+#
+# Hardware Spinlock drivers
+#
+CONFIG_CLKSRC_MMIO=y
+CONFIG_IOMMU_SUPPORT=y
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
+CONFIG_JBD=y
+CONFIG_JBD2=y
+CONFIG_EXPORTFS=m
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_GENERIC_ACL=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_TMPFS_XATTR=y
+CONFIG_MISC_FILESYSTEMS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+CONFIG_JFFS2_CMODE_PRIORITY=y
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+CONFIG_CRAMFS=m
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_DEF_FILE_IO_SIZE=4096
+CONFIG_NFS_USE_KERNEL_DNS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_NLS=y
+
+#
+# Kernel hacking
+#
+CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_RING_BUFFER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+CONFIG_BRANCH_PROFILE_NONE=y
+CONFIG_HAVE_ARCH_KGDB=y
+
+#
+# Security options
+#
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+CONFIG_CRC7=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_AVERAGE=y
diff --git a/recipes-kernel/linux/linux-yocto-3.8/zaurus-pxa-common-non-hw.cfg b/recipes-kernel/linux/linux-yocto-3.8/zaurus-pxa-common-non-hw.cfg
new file mode 100644
index 0000000..75c3626
--- /dev/null
+++ b/recipes-kernel/linux/linux-yocto-3.8/zaurus-pxa-common-non-hw.cfg
@@ -0,0 +1,9 @@
+#
+# Microsoft Hyper-V guest support
+#
+CONFIG_CLKDEV_LOOKUP=y
+
+#
+# End-user Products (sorted by vendor name)
+#
+CONFIG_PXA_SSP=y
diff --git a/recipes-kernel/linux/linux-yocto-3.8/zaurus-pxa-common.cfg b/recipes-kernel/linux/linux-yocto-3.8/zaurus-pxa-common.cfg
new file mode 100644
index 0000000..01805f2
--- /dev/null
+++ b/recipes-kernel/linux/linux-yocto-3.8/zaurus-pxa-common.cfg
@@ -0,0 +1,111 @@
+#
+# System Type
+#
+CONFIG_ARCH_PXA=y
+
+#
+# End-user Products (sorted by vendor name)
+#
+CONFIG_PXA_SHARPSL=y
+
+#
+# System MMU
+#
+CONFIG_PLAT_PXA=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_CPU_USE_DOMAINS=y
+
+#
+# Processor Features
+#
+CONFIG_XSCALE_PMU=y
+CONFIG_CPU_HAS_PMU=y
+CONFIG_MULTI_IRQ_HANDLER=y
+
+#
+# PC-card bridges
+#
+CONFIG_PCMCIA_PXA2XX=y
+
+#
+# Kernel Features
+#
+CONFIG_HAVE_ARCH_PFN_VALID=y
+CONFIG_HW_PERF_EVENTS=y
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+
+#
+# Boot options
+#
+CONFIG_AUTO_ZRELADDR=y
+
+#
+# FIR device drivers
+#
+CONFIG_PXA_FICP=m
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+
+#
+# PATA SFF controllers with BMDMA
+#
+CONFIG_PATA_PXA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_PXA=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_PXA2XX=y
+
+#
+# Multimedia Capabilities Port drivers
+#
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_DUMMY=y
+
+
+#
+# Console display driver support
+#
+CONFIG_SND_VMASTER=y
+CONFIG_SND_PXA2XX_PCM=m
+CONFIG_SND_PXA2XX_LIB=m
+CONFIG_SND_PXA2XX_LIB_AC97=y
+CONFIG_SND_PXA2XX_AC97=m
+CONFIG_SND_PXA2XX_SOC=m
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_PXA=y
diff --git a/recipes-kernel/linux/linux-yocto-3.8/zaurus-pxa-only.scc b/recipes-kernel/linux/linux-yocto-3.8/zaurus-pxa-only.scc
new file mode 100644
index 0000000..037a2e4
--- /dev/null
+++ b/recipes-kernel/linux/linux-yocto-3.8/zaurus-pxa-only.scc
@@ -0,0 +1,2 @@
+kconf hardware zaurus-pxa-common.cfg
+kconf non-hardware zaurus-pxa-common-non-hw.cfg
diff --git a/recipes-kernel/linux/linux-yocto-3.8/zaurus-usb-host.scc b/recipes-kernel/linux/linux-yocto-3.8/zaurus-usb-host.scc
new file mode 100644
index 0000000..19f7523
--- /dev/null
+++ b/recipes-kernel/linux/linux-yocto-3.8/zaurus-usb-host.scc
@@ -0,0 +1,6 @@
+kconf hardware zaurus-usb-ohci.cfg
+kconf non-hardware zaurus-usb-ohci-non-hw.cfg
+
+include features/usb/ohci-hcd.scc
+include features/usb-net/usb-net.scc
+#include cfg/usb-mass-storage.scc
diff --git a/recipes-kernel/linux/linux-yocto-3.8/zaurus-usb-ohci-non-hw.cfg b/recipes-kernel/linux/linux-yocto-3.8/zaurus-usb-ohci-non-hw.cfg
new file mode 100644
index 0000000..f20d7e6
--- /dev/null
+++ b/recipes-kernel/linux/linux-yocto-3.8/zaurus-usb-ohci-non-hw.cfg
@@ -0,0 +1,4 @@
+#
+# Console display driver support
+#
+CONFIG_SND_RAWMIDI_SEQ=m
diff --git a/recipes-kernel/linux/linux-yocto-3.8/zaurus-usb-ohci.cfg b/recipes-kernel/linux/linux-yocto-3.8/zaurus-usb-ohci.cfg
new file mode 100644
index 0000000..788bd05
--- /dev/null
+++ b/recipes-kernel/linux/linux-yocto-3.8/zaurus-usb-ohci.cfg
@@ -0,0 +1,110 @@
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_ATH3K=m
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_NET_CDC_NCM=m
+CONFIG_USB_SIERRA_NET=m
+
+#
+# Console display driver support
+#
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+
+#
+# USB HID Boot Protocol drivers
+#
+CONFIG_USB_KBD=m
+CONFIG_USB_MOUSE=m
+
+#
+# Special HID drivers
+#
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+CONFIG_USB_MON=m
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_SL811_HCD=m
+CONFIG_USB_SL811_CS=m
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+
+#
+# USB Imaging devices
+#
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
+
+#
+# USB port drivers
+#
+CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_SAFE=m
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_WWAN=m
+CONFIG_USB_SERIAL_OMNINET=m
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_RIO500=m
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_LED=m
+CONFIG_USB_CYTHERM=m
+CONFIG_USB_IDMOUSE=m
diff --git a/recipes-kernel/linux/linux-yocto_3.8.bbappend b/recipes-kernel/linux/linux-yocto_3.8.bbappend
new file mode 100644
index 0000000..b81a67d
--- /dev/null
+++ b/recipes-kernel/linux/linux-yocto_3.8.bbappend
@@ -0,0 +1,54 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}-3.8:${THISDIR}/${PN}:${THISDIR}/files:"
+
+COMPATIBLE_MACHINE .= "|akita|c7x0|collie|poodle|spitz|tosa"
+
+DEFAULT_PREFERENCE_akita = "-1"
+DEFAULT_PREFERENCE_c7x0 = "-1"
+DEFAULT_PREFERENCE_collie = "-1"
+DEFAULT_PREFERENCE_poodle = "-1"
+DEFAULT_PREFERENCE_spitz = "-1"
+DEFAULT_PREFERENCE_tosa = "-1"
+
+KMACHINE_akita = "akita"
+KMACHINE_c7x0 = "c7x0"
+KMACHINE_collie = "collie"
+KMACHINE_poodle = "poodle"
+KMACHINE_spitz = "spitz"
+KMACHINE_tosa = "tosa"
+
+SRC_URI_append_akita = " \
+ file://feature-top.scc \
+ file://vga/logo_linux_clut224.ppm.bz2 \
+ "
+
+SRC_URI_append_c7x0 = " \
+ file://feature-top.scc \
+ file://vga/logo_linux_clut224.ppm.bz2 \
+ "
+
+SRC_URI_append_collie = " \
+ file://feature-top.scc \
+ file://qvga/logo_linux_clut224.ppm.bz2 \
+ "
+
+SRC_URI_append_poodle = " \
+ file://feature-top.scc \
+ file://qvga/logo_linux_clut224.ppm.bz2 \
+ "
+
+SRC_URI_append_spitz = " \
+ file://feature-top.scc \
+ file://vga/logo_linux_clut224.ppm.bz2 \
+ "
+
+SRC_URI_append_tosa = " \
+ file://feature-top.scc \
+ file://vga/logo_linux_clut224.ppm.bz2 \
+ "
+
+do_configure_prepend() {
+
+ if [ -e ${WORKDIR}/logo_linux_clut224.ppm ]; then
+ install -m 0644 ${WORKDIR}/logo_linux_clut224.ppm ${WORKDIR}/linux/drivers/video/logo/logo_linux_clut224.ppm
+ fi
+}
--
1.7.12.4
More information about the Openembedded-devel
mailing list