[oe] Adding a recipe to oe bitbake
David Hirst
hirst689 at gmail.com
Fri Mar 22 15:02:23 UTC 2013
I did a bitbake tisdk-rootfs-image -c clean
I will try the cleanstate
It seems really difficult to get started from an absolutely clean slate,
some where status is held that gets in the way
I will let you know
Thanks so far
On Fri, Mar 22, 2013 at 10:51 AM, Gary Thomas <gary at mlbassoc.com> wrote:
> On 2013-03-22 08:42, David Hirst wrote:
>
>> OK,
>> Sorry for the carpet bombing! I added this to tisdk-rootfs-image
>> "task-arago-xyz \" to look for the new task file
>> I have included the task and pure-ftpd bb files also. I would love to
>> understand why this does not work.
>>
>
> What steps did you run after making this change?
> What version of bitbake are you using?
>
> Most likely, bitbake did not [fully] realize that you made a change.
> I'd try something like this:
> % bitbake tisdk-rootfs-image -c cleansstate
> % bitbake tisdk-rootfs-image
> and see what happens.
>
> BTW, top-posting is evil :-(
>
>
>> ==========================tisd**k-rootfs-image.bb<http://tisdk-rootfs-image.bb>
>> =============**===============
>> # Arago TI SDK filesystem image
>> COMPATIBLE_MACHINE = "omap3|omapl138|ti33x"
>>
>> require arago-base-tisdk-image.bb
>>
>> IMAGE_INSTALL += "\
>> task-arago-test \
>> task-arago-tisdk-graphics \
>> task-arago-tisdk-qte \
>> task-arago-tisdk-addons \
>> task-arago-tisdk-connectivity \
>> task-arago-tisdk-crypto \
>> task-arago-tisdk-matrix \
>> task-arago-tisdk-multimedia \
>> task-arago-tisdk-amsdk \
>> task-arago-xyz \
>> "
>>
>> export IMAGE_BASENAME = "tisdk-rootfs-image"
>>
>> =================task-arago.**xyz.bb <http://task-arago.xyz.bb>
>> ================
>>
>> DESCRIPTION = "Extended task to get extras"
>> LICENSE = "MIT"
>> LIC_FILES_CHKSUM =
>> "file://${COREBASE}/meta/**COPYING.MIT;md5=**
>> 3da9cfbcb788c80a0384361b4de204**20"
>> PR = "r0"
>>
>> inherit task
>>
>> ARAGO_XYZ = " \
>> pure-ftpd \
>> "
>>
>> ARAGO_XYZ_INT = "\
>> ${ARAGO_XYZ} \
>> "
>> RDEPENDS_${PN} = "\
>> ${ARAGO_XYZ_INT} \
>> "
>> ===============pure-ftpd_1.0.**29.bb <http://pure-ftpd_1.0.29.bb>
>> ====================
>>
>> DESCRIPTION = "Sample program"
>> LICENSE = "GPLv2"
>> LIC_FILES_CHKSUM = "file://COPYING;md5=**d7b47170f564f6a314b82b3ea67a40**
>> bd"
>> PR = "r0"
>> PV = "1.0.29"
>> DEPENDS = ""
>> RPROVIDES = "pure-ftpd"
>> PROVIDES = "pure-ftpd"
>> ARM_INSTRUCTION_SET = "arm"
>>
>> PARALLEL_MAKE = ""
>>
>> inherit autotools pkgconfig
>>
>> EXTRA_OECONF = "--enable-cross-compile --host=arm-arago-linux-**gnueabi"
>>
>> SRC_URI = "
>> http://iweb.dl.sourceforge.**net/project/pureftpd/Pure-**
>> FTPd/1.0.29/pure-ftpd-${PV}.**tar.gz<http://iweb.dl.sourceforge.net/project/pureftpd/Pure-FTPd/1.0.29/pure-ftpd-$%7BPV%7D.tar.gz>
>> "
>> SRC_URI[md5sum] = "**e0132a51357d419f8b66e8997d9dc5**fa"
>> SRC_URI[sha256sum] =
>> "**55bfb84fa63a37e5b56906afb4444f**da7285d0f8b5ed24798f59c978ddea**2749"
>> S = "${WORKDIR}/pure-ftpd-${PV}"
>>
>> EXTRA_OECONF_append_armv6 = " --enable-armv6"
>> EXTRA_OECONF_append_armv7a = " --enable-armv6 --enable-neon"
>>
>> FULL_OPTIMIZATION = "-fexpensive-optimizations -fomit-frame-pointer
>> -frename-registers -O4 -ffast-math"
>> BUILD_OPTIMIZATION = "${FULL_OPTIMIZATION}"
>>
>> do_configure(){
>> oe_runconf ${EXTRE_OECONF}
>> }
>>
>> do_compile () {
>> oe_runmake
>> }
>>
>> do_install () {
>> oe_runmake install DESTDIR=${D}
>> }
>>
>>
>> ARM_INSTRUCTION_SET = "arm"
>>
>> BBCLASSEXTEND = "native"
>>
>> ============================ END===========================
>>
>> On Fri, Mar 22, 2013 at 10:30 AM, Gary Thomas <gary at mlbassoc.com> wrote:
>>
>> On 2013-03-22 08:24, David Hirst wrote:
>>>
>>> Hi,
>>>> I have been struggling with a oe/bitbake issue. I wanted to add an
>>>> other .bb to the image file.
>>>> I have tried multiple ways but always end up at the same spot. I have
>>>> created a new task-XXX.bb file which includes my bb
>>>> I edited the XXXX-rootfs-image.bb to include the task-XXX.bb.
>>>> Once built I find that everything built fine and the new recipe was
>>>> built
>>>> but was not loaded into the XXXX-rootfs-image.tar,gz.
>>>> If I look into the image directory for the bb file I see the compiled
>>>> application in usr/sbin.
>>>> I have tried this with my own .bb file and net-snmp bb file which comes
>>>> with the default oe-layersetup installation with the same result.
>>>> Did I not edit a file or miss some other required step?
>>>>
>>>>
>>>> Wow, the same question on three mailing lists (that I read, there
>>> may be more...) and no cross-posting!
>>>
>>> This list is perhaps the most appropriate one for your question.
>>>
>>> More details will help. Exactly what did you change in the
>>> "XXXX-rootfs-image.bb"
>>> recipe?
>>>
>>> --
>>> ------------------------------****----------------------------**--
>>>
>>> Gary Thomas | Consulting for the
>>> MLB Associates | Embedded world
>>> ------------------------------****----------------------------**--
>>>
>>> ______________________________****_________________
>>> Openembedded-devel mailing list
>>> Openembedded-devel at lists.**ope**nembedded.org <http://openembedded.org><
>>> Openembedded-**devel at lists.openembedded.org<Openembedded-devel at lists.openembedded.org>
>>> >
>>> http://lists.linuxtogo.org/****cgi-bin/mailman/listinfo/****
>>> openembedded-devel<http://lists.linuxtogo.org/**cgi-bin/mailman/listinfo/**openembedded-devel>
>>> <http://**lists.linuxtogo.org/cgi-bin/**mailman/listinfo/openembedded-**
>>> devel<http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel>
>>> >
>>>
>>>
>>
>>
>>
> --
> ------------------------------**------------------------------
> Gary Thomas | Consulting for the
> MLB Associates | Embedded world
> ------------------------------**------------------------------
>
> ______________________________**_________________
> Openembedded-devel mailing list
> Openembedded-devel at lists.**openembedded.org<Openembedded-devel at lists.openembedded.org>
> http://lists.linuxtogo.org/**cgi-bin/mailman/listinfo/**openembedded-devel<http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel>
>
--
David Hirst
hirst689 at gmail.com
More information about the Openembedded-devel
mailing list