[oe] [OE] [PATCH meta-networking] quagga/ripd: Fix two bugs after received SIGHUP signal

Xufeng Zhang xufeng.zhang at windriver.com
Thu Oct 24 10:02:09 UTC 2013


On 10/24/2013 05:48 PM, Xufeng Zhang wrote:
> There are two problems for ripd implementation after received
> SIGHUP signal:
> 1). ripd didn't clean up ifp->connected list before reload
>      configuration file which makes the same advertise packet
>      being sent multiple times(depends on how many SIGHUP was recieved).
>    

More comment:
Generally this connected interface address stuff is cleaned up in 
rip_interface_address_delete()
which is triggered by zsend_interface_address(), but just as the 
annotation said above
zsend_interface_address() function in zebra/zserv.c, 
ZEBRA_INTERFACE_ADDRESS_DELETE
message could only happens in two cases:
1). ip address uninstall
2). RTM_NEWADDR on routing/netlink socket

It didn't take the SIGHUP signal into consideration, but since the 
SIGHUP is handled
by every daemon independently, this cleanup is not easy to be 
implemented commonly,
so I think this is a proper way to do this.


Thanks,
Xufeng

> 2). ripd reset ri->split_horizon flag to RIP_NO_SPLIT_HORIZON
>      during restart which is different from the flag when ripd is
>      firstly started up, leading to unnecessary route to be advertised.
>
> [YOCTO #5266]
>
> Signed-off-by: Xufeng Zhang<xufeng.zhang at windriver.com>
> ---
>   .../ripd-fix-two-bugs-after-received-SIGHUP.patch  |   49 ++++++++++++++++++++
>   .../recipes-protocols/quagga/quagga.inc            |    3 +-
>   2 files changed, 51 insertions(+), 1 deletions(-)
>   create mode 100644 meta-networking/recipes-protocols/quagga/files/ripd-fix-two-bugs-after-received-SIGHUP.patch
>
> diff --git a/meta-networking/recipes-protocols/quagga/files/ripd-fix-two-bugs-after-received-SIGHUP.patch b/meta-networking/recipes-protocols/quagga/files/ripd-fix-two-bugs-after-received-SIGHUP.patch
> new file mode 100644
> index 0000000..c081143
> --- /dev/null
> +++ b/meta-networking/recipes-protocols/quagga/files/ripd-fix-two-bugs-after-received-SIGHUP.patch
> @@ -0,0 +1,49 @@
> +ripd: Fix two bugs after received SIGHUP signal
> +
> +There are two problems for ripd implementation after received
> +SIGHUP signal:
> +1). ripd didn't clean up ifp->connected list before reload
> +    configuration file.
> +2). ripd reset ri->split_horizon flag to RIP_NO_SPLIT_HORIZON
> +    which lead to the unnecessary route to be advertised.
> +
> +Upstream-Status: Pending
> +
> +Signed-off-by: Xufeng Zhang<xufeng.zhang at windriver.com>
> +---
> +--- a/ripd/rip_interface.c
> ++++ b/ripd/rip_interface.c
> +@@ -500,6 +500,8 @@
> +   struct listnode *node;
> +   struct interface *ifp;
> +   struct rip_interface *ri;
> ++  struct connected *ifc;
> ++  struct listnode *conn_node, *next;
> +
> +   for (ALL_LIST_ELEMENTS_RO (iflist, node, ifp))
> +     {
> +@@ -514,6 +516,13 @@
> + 	  thread_cancel (ri->t_wakeup);
> + 	  ri->t_wakeup = NULL;
> + 	}
> ++
> ++      for (conn_node = listhead (ifp->connected); conn_node; conn_node = next)
> ++        {
> ++          ifc = listgetdata (conn_node);
> ++          next = conn_node->next;
> ++          listnode_delete (ifp->connected, ifc);
> ++        }
> +     }
> + }
> +
> +@@ -548,8 +557,8 @@
> + 	  ri->key_chain = NULL;
> + 	}
> +
> +-      ri->split_horizon = RIP_NO_SPLIT_HORIZON;
> +-      ri->split_horizon_default = RIP_NO_SPLIT_HORIZON;
> ++      ri->split_horizon = RIP_SPLIT_HORIZON;
> ++      ri->split_horizon_default = RIP_SPLIT_HORIZON;
> +
> +       ri->list[RIP_FILTER_IN] = NULL;
> +       ri->list[RIP_FILTER_OUT] = NULL;
> diff --git a/meta-networking/recipes-protocols/quagga/quagga.inc b/meta-networking/recipes-protocols/quagga/quagga.inc
> index 89b9f7a..bf37067 100644
> --- a/meta-networking/recipes-protocols/quagga/quagga.inc
> +++ b/meta-networking/recipes-protocols/quagga/quagga.inc
> @@ -31,7 +31,8 @@ SRC_URI = "http://download.savannah.gnu.org/releases/quagga${QUAGGASUBDIR}/quagg
>              file://quagga.default \
>              file://watchquagga.init \
>              file://watchquagga.default \
> -           file://volatiles.03_quagga"
> +           file://volatiles.03_quagga \
> +           file://ripd-fix-two-bugs-after-received-SIGHUP.patch"
>
>   PACKAGECONFIG ??= ""
>   PACKAGECONFIG[cap] = "--enable-capabilities,--disable-capabilities,libcap"
>    




More information about the Openembedded-devel mailing list