[oe] [meta-handheld][PATCH] linux-yocto-dev: remove machines already using 3.14
Andrea Adami
andrea.adami at gmail.com
Sun Apr 6 21:49:18 UTC 2014
h1940 is the single one left, needs backports
Signed-off-by: Andrea Adami <andrea.adami at gmail.com>
---
recipes-kernel/linux/linux-yocto-dev.bbappend | 59 +-
.../linux/linux-yocto-dev/akita/akita-standard.scc | 7 -
.../linux/linux-yocto-dev/akita/akita.cfg | 4 -
.../linux/linux-yocto-dev/akita/akita.scc | 6 -
.../linux/linux-yocto-dev/c7x0/c7x0-standard.scc | 7 -
recipes-kernel/linux/linux-yocto-dev/c7x0/c7x0.cfg | 52 --
recipes-kernel/linux/linux-yocto-dev/c7x0/c7x0.scc | 4 -
.../linux-yocto-dev/collie/collie-standard.scc | 7 -
.../linux/linux-yocto-dev/collie/collie.cfg | 118 ----
.../linux/linux-yocto-dev/collie/collie.scc | 16 -
.../linux/linux-yocto-dev/feature-top.scc | 1 -
...r-for-Atmel-Microcontroller-on-iPaq-h3xxx.patch | 712 ---------------------
...ARM-sa1100-add-Micro-ASIC-platform-device.patch | 73 ---
...r-for-microcontroller-keys-on-the-iPaq-h3.patch | 208 ------
...light-add-driver-for-iPAQ-micro-backlight.patch | 147 -----
...nput-driver-for-touchscreen-on-iPaq-h3xxx.patch | 198 ------
.../0006-leds-add-driver-for-the-iPAQ-micro.patch | 193 ------
...-driver-for-battery-reading-on-iPaq-h3xxx.patch | 350 ----------
.../linux/linux-yocto-dev/h3600/defconfig | 94 ---
.../patches-locomo/locomo-fix-SCL-SDA.patch | 28 -
.../patches-locomo/locomolcd-suspend-resume.patch | 92 ---
.../patches-locomokbd/locomo_kbd_tweak-r2.patch | 84 ---
.../patches/patches-mtd/collie-LH28F640BF.patch | 137 ----
.../patches-mtd/collie-cfi-probe-again.patch | 29 -
.../patches/patches-mtd/collie-match-cfi-qry.patch | 47 --
.../patches/patches-mtd/collie-mtd-resize.patch | 41 --
.../patches/patches-pxa/tosa-keys-mapping.patch | 136 ----
.../patches-sa1100/arm-sa1100-add-cpu-clock.patch | 95 ---
.../patches-sa1100/collie-add-bootblock.patch | 29 -
.../patches/patches-sa1100/collie-irda.patch | 88 ---
.../fbdev-sa1100fb-make-use-of-device-clock.patch | 112 ----
.../pcmcia-sa1100-device-clock.patch | 100 ---
.../linux-yocto-dev/poodle/poodle-standard.scc | 7 -
.../linux/linux-yocto-dev/poodle/poodle.cfg | 57 --
.../linux/linux-yocto-dev/poodle/poodle.scc | 6 -
.../linux/linux-yocto-dev/shrink_kernel.cfg | 28 -
.../linux/linux-yocto-dev/spitz/spitz-standard.scc | 7 -
.../linux/linux-yocto-dev/spitz/spitz.cfg | 61 --
.../linux/linux-yocto-dev/spitz/spitz.scc | 5 -
.../linux/linux-yocto-dev/tosa/tosa-standard.scc | 7 -
recipes-kernel/linux/linux-yocto-dev/tosa/tosa.cfg | 65 --
recipes-kernel/linux/linux-yocto-dev/tosa/tosa.scc | 7 -
.../linux/linux-yocto-dev/zaurus-common.scc | 14 -
.../linux/linux-yocto-dev/zaurus-hardware.cfg | 277 --------
.../linux/linux-yocto-dev/zaurus-non-hardware.cfg | 396 ------------
.../linux-yocto-dev/zaurus-pxa-common-non-hw.cfg | 9 -
.../linux/linux-yocto-dev/zaurus-pxa-common.cfg | 103 ---
.../linux/linux-yocto-dev/zaurus-pxa-only.scc | 2 -
.../linux/linux-yocto-dev/zaurus-usb-host.scc | 6 -
.../linux-yocto-dev/zaurus-usb-ohci-non-hw.cfg | 4 -
.../linux/linux-yocto-dev/zaurus-usb-ohci.cfg | 105 ---
51 files changed, 1 insertion(+), 4439 deletions(-)
delete mode 100644 recipes-kernel/linux/linux-yocto-dev/akita/akita-standard.scc
delete mode 100644 recipes-kernel/linux/linux-yocto-dev/akita/akita.cfg
delete mode 100644 recipes-kernel/linux/linux-yocto-dev/akita/akita.scc
delete mode 100644 recipes-kernel/linux/linux-yocto-dev/c7x0/c7x0-standard.scc
delete mode 100644 recipes-kernel/linux/linux-yocto-dev/c7x0/c7x0.cfg
delete mode 100644 recipes-kernel/linux/linux-yocto-dev/c7x0/c7x0.scc
delete mode 100644 recipes-kernel/linux/linux-yocto-dev/collie/collie-standard.scc
delete mode 100644 recipes-kernel/linux/linux-yocto-dev/collie/collie.cfg
delete mode 100644 recipes-kernel/linux/linux-yocto-dev/collie/collie.scc
delete mode 100644 recipes-kernel/linux/linux-yocto-dev/feature-top.scc
delete mode 100644 recipes-kernel/linux/linux-yocto-dev/h3600/0001-MFD-driver-for-Atmel-Microcontroller-on-iPaq-h3xxx.patch
delete mode 100644 recipes-kernel/linux/linux-yocto-dev/h3600/0002-ARM-sa1100-add-Micro-ASIC-platform-device.patch
delete mode 100644 recipes-kernel/linux/linux-yocto-dev/h3600/0003-input-driver-for-microcontroller-keys-on-the-iPaq-h3.patch
delete mode 100644 recipes-kernel/linux/linux-yocto-dev/h3600/0004-fb-backlight-add-driver-for-iPAQ-micro-backlight.patch
delete mode 100644 recipes-kernel/linux/linux-yocto-dev/h3600/0005-input-driver-for-touchscreen-on-iPaq-h3xxx.patch
delete mode 100644 recipes-kernel/linux/linux-yocto-dev/h3600/0006-leds-add-driver-for-the-iPAQ-micro.patch
delete mode 100644 recipes-kernel/linux/linux-yocto-dev/h3600/0007-power-add-driver-for-battery-reading-on-iPaq-h3xxx.patch
delete mode 100644 recipes-kernel/linux/linux-yocto-dev/h3600/defconfig
delete mode 100644 recipes-kernel/linux/linux-yocto-dev/patches/patches-locomo/locomo-fix-SCL-SDA.patch
delete mode 100644 recipes-kernel/linux/linux-yocto-dev/patches/patches-locomo/locomolcd-suspend-resume.patch
delete mode 100644 recipes-kernel/linux/linux-yocto-dev/patches/patches-locomokbd/locomo_kbd_tweak-r2.patch
delete mode 100644 recipes-kernel/linux/linux-yocto-dev/patches/patches-mtd/collie-LH28F640BF.patch
delete mode 100644 recipes-kernel/linux/linux-yocto-dev/patches/patches-mtd/collie-cfi-probe-again.patch
delete mode 100644 recipes-kernel/linux/linux-yocto-dev/patches/patches-mtd/collie-match-cfi-qry.patch
delete mode 100644 recipes-kernel/linux/linux-yocto-dev/patches/patches-mtd/collie-mtd-resize.patch
delete mode 100644 recipes-kernel/linux/linux-yocto-dev/patches/patches-pxa/tosa-keys-mapping.patch
delete mode 100644 recipes-kernel/linux/linux-yocto-dev/patches/patches-sa1100/arm-sa1100-add-cpu-clock.patch
delete mode 100644 recipes-kernel/linux/linux-yocto-dev/patches/patches-sa1100/collie-add-bootblock.patch
delete mode 100644 recipes-kernel/linux/linux-yocto-dev/patches/patches-sa1100/collie-irda.patch
delete mode 100644 recipes-kernel/linux/linux-yocto-dev/patches/patches-sa1100/fbdev-sa1100fb-make-use-of-device-clock.patch
delete mode 100644 recipes-kernel/linux/linux-yocto-dev/patches/patches-sa1100/pcmcia-sa1100-device-clock.patch
delete mode 100644 recipes-kernel/linux/linux-yocto-dev/poodle/poodle-standard.scc
delete mode 100644 recipes-kernel/linux/linux-yocto-dev/poodle/poodle.cfg
delete mode 100644 recipes-kernel/linux/linux-yocto-dev/poodle/poodle.scc
delete mode 100644 recipes-kernel/linux/linux-yocto-dev/shrink_kernel.cfg
delete mode 100644 recipes-kernel/linux/linux-yocto-dev/spitz/spitz-standard.scc
delete mode 100644 recipes-kernel/linux/linux-yocto-dev/spitz/spitz.cfg
delete mode 100644 recipes-kernel/linux/linux-yocto-dev/spitz/spitz.scc
delete mode 100644 recipes-kernel/linux/linux-yocto-dev/tosa/tosa-standard.scc
delete mode 100644 recipes-kernel/linux/linux-yocto-dev/tosa/tosa.cfg
delete mode 100644 recipes-kernel/linux/linux-yocto-dev/tosa/tosa.scc
delete mode 100644 recipes-kernel/linux/linux-yocto-dev/zaurus-common.scc
delete mode 100644 recipes-kernel/linux/linux-yocto-dev/zaurus-hardware.cfg
delete mode 100644 recipes-kernel/linux/linux-yocto-dev/zaurus-non-hardware.cfg
delete mode 100644 recipes-kernel/linux/linux-yocto-dev/zaurus-pxa-common-non-hw.cfg
delete mode 100644 recipes-kernel/linux/linux-yocto-dev/zaurus-pxa-common.cfg
delete mode 100644 recipes-kernel/linux/linux-yocto-dev/zaurus-pxa-only.scc
delete mode 100644 recipes-kernel/linux/linux-yocto-dev/zaurus-usb-host.scc
delete mode 100644 recipes-kernel/linux/linux-yocto-dev/zaurus-usb-ohci-non-hw.cfg
delete mode 100644 recipes-kernel/linux/linux-yocto-dev/zaurus-usb-ohci.cfg
diff --git a/recipes-kernel/linux/linux-yocto-dev.bbappend b/recipes-kernel/linux/linux-yocto-dev.bbappend
index c4e85f9..a3571c8 100644
--- a/recipes-kernel/linux/linux-yocto-dev.bbappend
+++ b/recipes-kernel/linux/linux-yocto-dev.bbappend
@@ -1,42 +1,12 @@
FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}-dev:${THISDIR}/${PN}:${THISDIR}/files:"
-COMPATIBLE_MACHINE .= "|akita|c7x0|collie|h1940|h3600|poodle|spitz|tosa"
+COMPATIBLE_MACHINE .= "|h1940"
# Override kernel features
#KERNEL_EXTRA_FEATURES ?= "features/netfilter/netfilter.scc"
-KERNEL_EXTRA_FEATURES_akita ?= ""
-KERNEL_EXTRA_FEATURES_c7x0 ?= ""
-KERNEL_EXTRA_FEATURES_collie ?= ""
KERNEL_EXTRA_FEATURES_h1940 ?= ""
-KERNEL_EXTRA_FEATURES_h3600 ?= ""
-KERNEL_EXTRA_FEATURES_poodle ?= ""
-KERNEL_EXTRA_FEATURES_spitz ?= ""
-KERNEL_EXTRA_FEATURES_tosa ?= ""
-
-KMACHINE_akita = "akita"
-KMACHINE_c7x0 = "c7x0"
-KMACHINE_collie = "collie"
KMACHINE_h1940 = "h1940"
-KMACHINE_h3600 = "h3600"
-KMACHINE_poodle = "poodle"
-KMACHINE_spitz = "spitz"
-KMACHINE_tosa = "tosa"
-
-SRC_URI_append_akita = " \
- file://feature-top.scc \
- file://vga/logo_linux_clut224.ppm.bz2 \
- "
-
-SRC_URI_append_c7x0 = " \
- file://feature-top.scc \
- file://vga/logo_linux_clut224.ppm.bz2 \
- "
-
-SRC_URI_append_collie = " \
- file://feature-top.scc \
- file://qvga/logo_linux_clut224.ppm.bz2 \
- "
SRC_URI_append_h1940 = " \
file://defconfig \
@@ -55,33 +25,6 @@ SRC_URI_append_h1940 = " \
file://qvga/logo_linux_clut224.ppm.bz2 \
"
-SRC_URI_append_h3600 = " \
- file://defconfig \
- file://0001-MFD-driver-for-Atmel-Microcontroller-on-iPaq-h3xxx.patch \
- file://0002-ARM-sa1100-add-Micro-ASIC-platform-device.patch \
- file://0003-input-driver-for-microcontroller-keys-on-the-iPaq-h3.patch \
- file://0004-fb-backlight-add-driver-for-iPAQ-micro-backlight.patch \
- file://0005-input-driver-for-touchscreen-on-iPaq-h3xxx.patch \
- file://0006-leds-add-driver-for-the-iPAQ-micro.patch \
- file://0007-power-add-driver-for-battery-reading-on-iPaq-h3xxx.patch \
- file://qvga/logo_linux_clut224.ppm.bz2 \
- "
-
-SRC_URI_append_poodle = " \
- file://feature-top.scc \
- file://qvga/logo_linux_clut224.ppm.bz2 \
- "
-
-SRC_URI_append_spitz = " \
- file://feature-top.scc \
- file://vga/logo_linux_clut224.ppm.bz2 \
- "
-
-SRC_URI_append_tosa = " \
- file://feature-top.scc \
- file://vga/logo_linux_clut224.ppm.bz2 \
- "
-
do_configure_prepend() {
if [ -e ${WORKDIR}/logo_linux_clut224.ppm ]; then
diff --git a/recipes-kernel/linux/linux-yocto-dev/akita/akita-standard.scc b/recipes-kernel/linux/linux-yocto-dev/akita/akita-standard.scc
deleted file mode 100644
index 21096d0..0000000
--- a/recipes-kernel/linux/linux-yocto-dev/akita/akita-standard.scc
+++ /dev/null
@@ -1,7 +0,0 @@
-define KMACHINE akita
-define KTYPE standard
-define KARCH arm
-
-include ktypes/standard/standard.scc
-
-include akita.scc
diff --git a/recipes-kernel/linux/linux-yocto-dev/akita/akita.cfg b/recipes-kernel/linux/linux-yocto-dev/akita/akita.cfg
deleted file mode 100644
index f6eb8f2..0000000
--- a/recipes-kernel/linux/linux-yocto-dev/akita/akita.cfg
+++ /dev/null
@@ -1,4 +0,0 @@
-#
-# System Type
-#
-CONFIG_GPIO_PCA953X=y
diff --git a/recipes-kernel/linux/linux-yocto-dev/akita/akita.scc b/recipes-kernel/linux/linux-yocto-dev/akita/akita.scc
deleted file mode 100644
index a7f542a..0000000
--- a/recipes-kernel/linux/linux-yocto-dev/akita/akita.scc
+++ /dev/null
@@ -1,6 +0,0 @@
-kconf hardware ../spitz/spitz.cfg
-kconf hardware akita.cfg
-
-include ../zaurus-pxa-only.scc
-include ../zaurus-common.scc
-include ../zaurus-usb-host.scc
diff --git a/recipes-kernel/linux/linux-yocto-dev/c7x0/c7x0-standard.scc b/recipes-kernel/linux/linux-yocto-dev/c7x0/c7x0-standard.scc
deleted file mode 100644
index 325c7c7..0000000
--- a/recipes-kernel/linux/linux-yocto-dev/c7x0/c7x0-standard.scc
+++ /dev/null
@@ -1,7 +0,0 @@
-define KMACHINE c7x0
-define KTYPE standard
-define KARCH arm
-
-include ktypes/standard/standard.scc
-
-include c7x0.scc
diff --git a/recipes-kernel/linux/linux-yocto-dev/c7x0/c7x0.cfg b/recipes-kernel/linux/linux-yocto-dev/c7x0/c7x0.cfg
deleted file mode 100644
index 7da7c19..0000000
--- a/recipes-kernel/linux/linux-yocto-dev/c7x0/c7x0.cfg
+++ /dev/null
@@ -1,52 +0,0 @@
-#
-# End-user Products (sorted by vendor name)
-#
-CONFIG_MACH_CORGI=y
-CONFIG_MACH_SHEPHERD=y
-CONFIG_MACH_HUSKY=y
-CONFIG_PXA25x=y
-CONFIG_PXA_SHARP_C7xx=y
-CONFIG_SHARPSL_PM=y
-CONFIG_SHARPSL_PM_MAX1111=y
-
-#
-# Boot options
-#
-CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 loglevel=3"
-
-#
-# Disk-On-Chip Device Drivers
-#
-CONFIG_MTD_NAND_SHARPSL=y
-
-#
-# Input Device Drivers
-#
-CONFIG_KEYBOARD_MATRIX=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
-
-#
-# Frame buffer hardware drivers
-#
-CONFIG_FB_W100=y
-CONFIG_LCD_CORGI=y
-CONFIG_BACKLIGHT_GENERIC=y
-
-#
-# Console display driver support
-#
-CONFIG_FONT_8x16=y
-
-#
-# USB Miscellaneous drivers
-#
-CONFIG_USB_PXA25X=m
-CONFIG_SND_PXA2XX_SOC_I2S=m
-CONFIG_SND_PXA2XX_SOC_CORGI=m
-CONFIG_SND_SOC_WM8731=m
diff --git a/recipes-kernel/linux/linux-yocto-dev/c7x0/c7x0.scc b/recipes-kernel/linux/linux-yocto-dev/c7x0/c7x0.scc
deleted file mode 100644
index 662a7b7..0000000
--- a/recipes-kernel/linux/linux-yocto-dev/c7x0/c7x0.scc
+++ /dev/null
@@ -1,4 +0,0 @@
-kconf hardware c7x0.cfg
-
-include ../zaurus-pxa-only.scc
-include ../zaurus-common.scc
diff --git a/recipes-kernel/linux/linux-yocto-dev/collie/collie-standard.scc b/recipes-kernel/linux/linux-yocto-dev/collie/collie-standard.scc
deleted file mode 100644
index 7283ad9..0000000
--- a/recipes-kernel/linux/linux-yocto-dev/collie/collie-standard.scc
+++ /dev/null
@@ -1,7 +0,0 @@
-define KMACHINE collie
-define KTYPE standard
-define KARCH arm
-
-include ktypes/standard/standard.scc
-
-include collie.scc
diff --git a/recipes-kernel/linux/linux-yocto-dev/collie/collie.cfg b/recipes-kernel/linux/linux-yocto-dev/collie/collie.cfg
deleted file mode 100644
index c334774..0000000
--- a/recipes-kernel/linux/linux-yocto-dev/collie/collie.cfg
+++ /dev/null
@@ -1,118 +0,0 @@
-#
-# System Type
-#
-CONFIG_ARCH_SA1100=y
-
-#
-# SA11x0 Implementations
-#
-CONFIG_SA1100_COLLIE=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_USE_DOMAINS=y
-
-#
-# Processor Features
-#
-CONFIG_SHARP_LOCOMO=y
-
-#
-# PC-card bridges
-#
-CONFIG_PCMCIA_SA11XX_BASE=y
-CONFIG_PCMCIA_SA1100=y
-
-#
-# Kernel Features
-#
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_SPARSEMEM_EXTREME=y
-
-#
-# Boot options
-#
-CONFIG_CMDLINE="console=ttySA0,115200n8 console=tty1 mem=64M fbcon=rotate:1 loglevel=3"
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-CONFIG_MTD_CFI_I2=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_UTIL=y
-
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_SA1100=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_SA1100=y
-CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-
-#
-# Multimedia Capabilities Port drivers
-#
-CONFIG_MCP=y
-CONFIG_MCP_SA11X0=y
-CONFIG_MCP_UCB1200=y
-CONFIG_MCP_UCB1200_TS=y
-
-#
-# Input Device Drivers
-#
-CONFIG_KEYBOARD_LOCOMO=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=240
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
-
-#
-# Frame buffer hardware drivers
-#
-CONFIG_FB_SA1100=y
-CONFIG_BACKLIGHT_LOCOMO=y
-
-#
-# Console display driver support
-#
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONT_8x8=y
-
-#
-# LED drivers
-#
-CONFIG_LEDS_LOCOMO=y
-
-#
-# MODULbus GPIO expanders:
-#
-CONFIG_BATTERY_COLLIE=y
diff --git a/recipes-kernel/linux/linux-yocto-dev/collie/collie.scc b/recipes-kernel/linux/linux-yocto-dev/collie/collie.scc
deleted file mode 100644
index f165102..0000000
--- a/recipes-kernel/linux/linux-yocto-dev/collie/collie.scc
+++ /dev/null
@@ -1,16 +0,0 @@
-kconf hardware collie.cfg
-
-include ../zaurus-common.scc
-
-patch ../patches/patches-locomokbd/locomo_kbd_tweak-r2.patch
-patch ../patches/patches-mtd/collie-cfi-probe-again.patch
-patch ../patches/patches-mtd/collie-mtd-resize.patch
-patch ../patches/patches-mtd/collie-match-cfi-qry.patch
-patch ../patches/patches-mtd/collie-LH28F640BF.patch
-patch ../patches/patches-sa1100/collie-irda.patch
-patch ../patches/patches-sa1100/collie-add-bootblock.patch
-patch ../patches/patches-sa1100/arm-sa1100-add-cpu-clock.patch
-patch ../patches/patches-sa1100/fbdev-sa1100fb-make-use-of-device-clock.patch
-patch ../patches/patches-sa1100/pcmcia-sa1100-device-clock.patch
-patch ../patches/patches-locomo/locomo-fix-SCL-SDA.patch
-patch ../patches/patches-locomo/locomolcd-suspend-resume.patch
diff --git a/recipes-kernel/linux/linux-yocto-dev/feature-top.scc b/recipes-kernel/linux/linux-yocto-dev/feature-top.scc
deleted file mode 100644
index fdffa2a..0000000
--- a/recipes-kernel/linux/linux-yocto-dev/feature-top.scc
+++ /dev/null
@@ -1 +0,0 @@
-# placeholder
diff --git a/recipes-kernel/linux/linux-yocto-dev/h3600/0001-MFD-driver-for-Atmel-Microcontroller-on-iPaq-h3xxx.patch b/recipes-kernel/linux/linux-yocto-dev/h3600/0001-MFD-driver-for-Atmel-Microcontroller-on-iPaq-h3xxx.patch
deleted file mode 100644
index 2470cdf..0000000
--- a/recipes-kernel/linux/linux-yocto-dev/h3600/0001-MFD-driver-for-Atmel-Microcontroller-on-iPaq-h3xxx.patch
+++ /dev/null
@@ -1,712 +0,0 @@
-From a2073bd47b86b1ad3ba0600e772cd0f14ba73838 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij at linaro.org>
-Date: Fri, 31 Jan 2014 14:34:35 +0100
-Subject: [PATCH 1/7] MFD: driver for Atmel Microcontroller on iPaq h3xxx
-
-This adds a driver for the Atmel Microcontroller found on the
-iPAQ h3xxx series. This device handles some keys, the
-touchscreen, and the battery monitoring.
-
-This is a port of a driver from handhelds.org 2.6.21 kernel,
-written by Alessandro Gardich based on Andrew Christians
-original HAL-driver. It has been heavily cleaned and
-converted to mfd-core by Dmitry Artamonow and rewritten
-again for the v3.x series kernels by Linus Walleij,
-bringing back some of the functionality lost from Andrew's
-original driver.
-
-Cc: Russell King <linux at arm.linux.org.uk>
-Cc: Dmitry Eremin-Solenikov <dbaryshkov at gmail.com>
-Acked-by: Greg Kroah-Hartman <gregkh at linuxfoundation.org>
-Signed-off-by: Alessandro Gardich <gremlin at gremlin.it>
-Signed-off-by: Dmitry Artamonow <mad_soft at inbox.ru>
-Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
----
- drivers/mfd/Kconfig | 10 +
- drivers/mfd/Makefile | 1 +
- drivers/mfd/ipaq-micro.c | 487 +++++++++++++++++++++++++++++++++++++++++
- include/linux/mfd/ipaq-micro.h | 148 +++++++++++++
- 4 files changed, 646 insertions(+)
- create mode 100644 drivers/mfd/ipaq-micro.c
- create mode 100644 include/linux/mfd/ipaq-micro.h
-
-diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
-index 49bb445d846a..255807afc582 100644
---- a/drivers/mfd/Kconfig
-+++ b/drivers/mfd/Kconfig
-@@ -242,6 +242,16 @@ config MFD_INTEL_MSIC
- Passage) chip. This chip embeds audio, battery, GPIO, etc.
- devices used in Intel Medfield platforms.
-
-+config MFD_IPAQ_MICRO
-+ bool "Atmel Micro ASIC (iPAQ h3100/h3600/h3700) Support"
-+ depends on SA1100_H3100 || SA1100_H3600
-+ select MFD_CORE
-+ help
-+ Select this to get support for the Microcontroller found in
-+ the Compaq iPAQ handheld computers. This is an Atmel
-+ AT90LS8535 microcontroller flashed with a special iPAQ
-+ firmware using the custom protocol implemented in this driver.
-+
- config MFD_JANZ_CMODIO
- tristate "Janz CMOD-IO PCI MODULbus Carrier Board"
- select MFD_CORE
-diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
-index 5aea5ef0a62f..cf8081fcb3ac 100644
---- a/drivers/mfd/Makefile
-+++ b/drivers/mfd/Makefile
-@@ -166,3 +166,4 @@ obj-$(CONFIG_MFD_RETU) += retu-mfd.o
- obj-$(CONFIG_MFD_AS3711) += as3711.o
- obj-$(CONFIG_MFD_AS3722) += as3722.o
- obj-$(CONFIG_MFD_STW481X) += stw481x.o
-+obj-$(CONFIG_MFD_IPAQ_MICRO) += ipaq-micro.o
-diff --git a/drivers/mfd/ipaq-micro.c b/drivers/mfd/ipaq-micro.c
-new file mode 100644
-index 000000000000..f71dffdd3f0f
---- /dev/null
-+++ b/drivers/mfd/ipaq-micro.c
-@@ -0,0 +1,487 @@
-+/*
-+ * Compaq iPAQ h3xxx Atmel microcontroller companion support
-+ *
-+ * This is an Atmel AT90LS8535 with a special flashed-in firmware that
-+ * implements the special protocol used by this driver.
-+ *
-+ * based on previous kernel 2.4 version by Andrew Christian
-+ * Author : Alessandro Gardich <gremlin at gremlin.it>
-+ * Author : Dmitry Artamonow <mad_soft at inbox.ru>
-+ * Author : Linus Walleij <linus.walleij at linaro.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/pm.h>
-+#include <linux/delay.h>
-+#include <linux/device.h>
-+#include <linux/platform_device.h>
-+#include <linux/io.h>
-+#include <linux/mfd/core.h>
-+#include <linux/mfd/ipaq-micro.h>
-+#include <linux/string.h>
-+#include <linux/random.h>
-+#include <linux/slab.h>
-+#include <linux/list.h>
-+
-+#include <mach/hardware.h>
-+
-+static void ipaq_micro_trigger_tx(struct ipaq_micro *micro)
-+{
-+ struct ipaq_micro_txdev *tx = µ->tx;
-+ struct ipaq_micro_msg *msg = micro->msg;
-+ int i, bp;
-+ u8 checksum;
-+ u32 val;
-+
-+ bp = 0;
-+ tx->buf[bp++] = CHAR_SOF;
-+
-+ checksum = ((msg->id & 0x0f) << 4) | (msg->tx_len & 0x0f);
-+ tx->buf[bp++] = checksum;
-+
-+ for (i = 0; i < msg->tx_len; i++) {
-+ tx->buf[bp++] = msg->tx_data[i];
-+ checksum += msg->tx_data[i];
-+ }
-+
-+ tx->buf[bp++] = checksum;
-+ tx->len = bp;
-+ tx->index = 0;
-+ print_hex_dump(KERN_DEBUG, "data: ", DUMP_PREFIX_OFFSET, 16, 1,
-+ tx->buf, tx->len, true);
-+
-+ /* Enable interrupt */
-+ val = readl(micro->base + UTCR3);
-+ val |= UTCR3_TIE;
-+ writel(val, micro->base + UTCR3);
-+}
-+
-+int ipaq_micro_tx_msg(struct ipaq_micro *micro, struct ipaq_micro_msg *msg)
-+{
-+ unsigned long flags;
-+
-+ dev_dbg(micro->dev, "TX msg: %02x, %d bytes\n", msg->id, msg->tx_len);
-+
-+ spin_lock_irqsave(µ->lock, flags);
-+ if (micro->msg) {
-+ list_add_tail(&msg->node, µ->queue);
-+ spin_unlock_irqrestore(µ->lock, flags);
-+ return 0;
-+ }
-+ micro->msg = msg;
-+ ipaq_micro_trigger_tx(micro);
-+ spin_unlock_irqrestore(µ->lock, flags);
-+ return 0;
-+}
-+EXPORT_SYMBOL(ipaq_micro_tx_msg);
-+
-+static void micro_rx_msg(struct ipaq_micro *micro, u8 id, int len, u8 *data)
-+{
-+ int i;
-+
-+ dev_dbg(micro->dev, "RX msg: %02x, %d bytes\n", id, len);
-+
-+ spin_lock(µ->lock);
-+ switch (id) {
-+ case MSG_VERSION:
-+ case MSG_EEPROM_READ:
-+ case MSG_EEPROM_WRITE:
-+ case MSG_BACKLIGHT:
-+ case MSG_NOTIFY_LED:
-+ case MSG_THERMAL_SENSOR:
-+ case MSG_BATTERY:
-+ /* Handle synchronous messages */
-+ if (micro->msg && micro->msg->id == id) {
-+ struct ipaq_micro_msg *msg = micro->msg;
-+
-+ memcpy(msg->rx_data, data, len);
-+ msg->rx_len = len;
-+ complete(µ->msg->ack);
-+ if (!list_empty(µ->queue)) {
-+ micro->msg = list_entry(micro->queue.next,
-+ struct ipaq_micro_msg,
-+ node);
-+ list_del_init(µ->msg->node);
-+ ipaq_micro_trigger_tx(micro);
-+ } else
-+ micro->msg = NULL;
-+ dev_dbg(micro->dev, "OK RX message 0x%02x\n", id);
-+ } else {
-+ dev_err(micro->dev,
-+ "out of band RX message 0x%02x\n", id);
-+ if(!micro->msg)
-+ dev_info(micro->dev, "no message queued\n");
-+ else
-+ dev_info(micro->dev, "expected message %02x\n",
-+ micro->msg->id);
-+ }
-+ break;
-+ case MSG_KEYBOARD:
-+ if (micro->key)
-+ micro->key(micro->key_data, len, data);
-+ else
-+ dev_dbg(micro->dev, "key message ignored, no handle \n");
-+ break;
-+ case MSG_TOUCHSCREEN:
-+ if (micro->ts)
-+ micro->ts(micro->ts_data, len, data);
-+ else
-+ dev_dbg(micro->dev, "touchscreen message ignored, no handle \n");
-+ break;
-+ default:
-+ dev_err(micro->dev,
-+ "unknown msg %d [%d] ", id, len);
-+ for (i = 0; i < len; ++i)
-+ pr_cont("0x%02x ", data[i]);
-+ pr_cont("\n");
-+ }
-+ spin_unlock(µ->lock);
-+}
-+
-+static void micro_process_char(struct ipaq_micro *micro, u8 ch)
-+{
-+ struct ipaq_micro_rxdev *rx = µ->rx;
-+
-+ switch (rx->state) {
-+ case STATE_SOF: /* Looking for SOF */
-+ if (ch == CHAR_SOF)
-+ rx->state = STATE_ID; /* Next byte is the id and len */
-+ break;
-+ case STATE_ID: /* Looking for id and len byte */
-+ rx->id = (ch & 0xf0) >> 4 ;
-+ rx->len = (ch & 0x0f);
-+ rx->index = 0;
-+ rx->chksum = ch;
-+ rx->state = (rx->len > 0) ? STATE_DATA : STATE_CHKSUM;
-+ break;
-+ case STATE_DATA: /* Looking for 'len' data bytes */
-+ rx->chksum += ch;
-+ rx->buf[rx->index] = ch;
-+ if (++rx->index == rx->len)
-+ rx->state = STATE_CHKSUM;
-+ break;
-+ case STATE_CHKSUM: /* Looking for the checksum */
-+ if (ch == rx->chksum)
-+ micro_rx_msg(micro, rx->id, rx->len, rx->buf);
-+ rx->state = STATE_SOF;
-+ break;
-+ }
-+}
-+
-+static void micro_rx_chars(struct ipaq_micro *micro)
-+{
-+ u32 status, ch;
-+
-+ while ((status = readl(micro->base + UTSR1)) & UTSR1_RNE) {
-+ ch = readl(micro->base + UTDR);
-+ if (status & UTSR1_PRE)
-+ dev_err(micro->dev, "rx: parity error\n");
-+ else if (status & UTSR1_FRE)
-+ dev_err(micro->dev, "rx: framing error\n");
-+ else if (status & UTSR1_ROR)
-+ dev_err(micro->dev, "rx: overrun error\n");
-+ micro_process_char(micro, ch);
-+ }
-+}
-+
-+static void ipaq_micro_get_version(struct ipaq_micro *micro)
-+{
-+ struct ipaq_micro_msg msg = {
-+ .id = MSG_VERSION,
-+ };
-+
-+ ipaq_micro_tx_msg_sync(micro, &msg);
-+ if (msg.rx_len == 4) {
-+ memcpy(micro->version, msg.rx_data, 4);
-+ micro->version[4] = '\0';
-+ } else if (msg.rx_len == 9) {
-+ memcpy(micro->version, msg.rx_data, 4);
-+ micro->version[4] = '\0';
-+ /* Bytes 4-7 are "pack", byte 8 is "boot type" */
-+ } else {
-+ dev_err(micro->dev,
-+ "illegal version message %d bytes\n", msg.rx_len);
-+ }
-+}
-+
-+static void ipaq_micro_eeprom_read(struct ipaq_micro *micro,
-+ u8 address, u8 len, u8 *data)
-+{
-+ struct ipaq_micro_msg msg = {
-+ .id = MSG_EEPROM_READ,
-+ };
-+ u8 i;
-+
-+ for (i = 0; i < len; i++) {
-+ msg.tx_data[0] = address + i;
-+ msg.tx_data[1] = 1;
-+ msg.tx_len = 2;
-+ ipaq_micro_tx_msg_sync(micro, &msg);
-+ memcpy(data + (i * 2), msg.rx_data, 2);
-+ }
-+}
-+
-+static char *ipaq_micro_str(u8 *wchar, u8 len)
-+{
-+ char retstr[256];
-+ u8 i;
-+
-+ for (i = 0; i < len / 2; i++)
-+ retstr[i] = wchar[i * 2];
-+ return kstrdup(retstr, GFP_KERNEL);
-+}
-+
-+static u16 ipaq_micro_to_u16(u8 *data)
-+{
-+ return data[1] << 8 | data[0];
-+}
-+
-+static void ipaq_micro_eeprom_dump(struct ipaq_micro *micro)
-+{
-+ u8 dump[256];
-+ char *str;
-+
-+ ipaq_micro_eeprom_read(micro, 0, 128, dump);
-+ str = ipaq_micro_str(dump, 10);
-+ if (str) {
-+ dev_info(micro->dev, "HM version %s\n", str);
-+ kfree(str);
-+ }
-+ str = ipaq_micro_str(dump+10, 40);
-+ if (str) {
-+ dev_info(micro->dev, "serial number: %s\n", str);
-+ /* Feed the random pool with this */
-+ add_device_randomness(str, strlen(str));
-+ kfree(str);
-+ }
-+ str = ipaq_micro_str(dump+50, 20);
-+ if (str) {
-+ dev_info(micro->dev, "module ID: %s\n", str);
-+ kfree(str);
-+ }
-+ str = ipaq_micro_str(dump+70, 10);
-+ if (str) {
-+ dev_info(micro->dev, "product revision: %s\n", str);
-+ kfree(str);
-+ }
-+ dev_info(micro->dev, "product ID: %u\n", ipaq_micro_to_u16(dump+80));
-+ dev_info(micro->dev, "frame rate: %u fps\n",
-+ ipaq_micro_to_u16(dump+82));
-+ dev_info(micro->dev, "page mode: %u\n", ipaq_micro_to_u16(dump+84));
-+ dev_info(micro->dev, "country ID: %u\n", ipaq_micro_to_u16(dump+86));
-+ dev_info(micro->dev, "color display: %s\n",
-+ ipaq_micro_to_u16(dump+88) ? "yes" : "no");
-+ dev_info(micro->dev, "ROM size: %u MiB\n", ipaq_micro_to_u16(dump+90));
-+ dev_info(micro->dev, "RAM size: %u KiB\n", ipaq_micro_to_u16(dump+92));
-+ dev_info(micro->dev, "screen: %u x %u\n",
-+ ipaq_micro_to_u16(dump+94), ipaq_micro_to_u16(dump+96));
-+ print_hex_dump(KERN_DEBUG, "eeprom: ", DUMP_PREFIX_OFFSET, 16, 1,
-+ dump, 256, true);
-+
-+}
-+
-+static void micro_tx_chars(struct ipaq_micro *micro)
-+{
-+ struct ipaq_micro_txdev *tx = µ->tx;
-+ u32 val;
-+
-+ while ((tx->index < tx->len) &&
-+ (readl(micro->base + UTSR1) & UTSR1_TNF)) {
-+ writel(tx->buf[tx->index], micro->base + UTDR);
-+ tx->index++;
-+ }
-+
-+ /* Stop interrupts */
-+ val = readl(micro->base + UTCR3);
-+ val &= ~UTCR3_TIE;
-+ writel(val, micro->base + UTCR3);
-+}
-+
-+static void micro_reset_comm(struct ipaq_micro *micro)
-+{
-+ struct ipaq_micro_rxdev *rx = µ->rx;
-+ u32 val;
-+
-+ if (micro->msg)
-+ complete(µ->msg->ack);
-+
-+ /* Initialize Serial channel protocol frame */
-+ rx->state = STATE_SOF; /* Reset the state machine */
-+
-+ /* Set up interrupts */
-+ writel(0x01, micro->sdlc + 0x0); /* Select UART mode */
-+
-+ /* Clean up CR3 */
-+ writel(0x0, micro->base + UTCR3);
-+
-+ /* Format: 8N1 */
-+ writel(UTCR0_8BitData | UTCR0_1StpBit, micro->base + UTCR0);
-+
-+ /* Baud rate: 115200 */
-+ writel(0x0, micro->base + UTCR1);
-+ writel(0x1, micro->base + UTCR2);
-+
-+ /* Clear SR0 */
-+ writel(0xff, micro->base + UTSR0);
-+
-+ /* Enable RX int, disable TX int */
-+ writel(UTCR3_TXE | UTCR3_RXE | UTCR3_RIE, micro->base + UTCR3);
-+ val = readl(micro->base + UTCR3);
-+ val &= ~UTCR3_TIE;
-+ writel(val, micro->base + UTCR3);
-+}
-+
-+static irqreturn_t micro_serial_isr(int irq, void *dev_id)
-+{
-+ struct ipaq_micro *micro = dev_id;
-+ struct ipaq_micro_txdev *tx = µ->tx;
-+ u32 status;
-+
-+ status = readl(micro->base + UTSR0);
-+ do {
-+ if (status & (UTSR0_RID | UTSR0_RFS)) {
-+ if (status & UTSR0_RID)
-+ /* Clear the Receiver IDLE bit */
-+ writel(UTSR0_RID, micro->base + UTSR0);
-+ micro_rx_chars(micro);
-+ }
-+
-+ /* Clear break bits */
-+ if (status & (UTSR0_RBB | UTSR0_REB))
-+ writel(status & (UTSR0_RBB | UTSR0_REB),
-+ micro->base + UTSR0);
-+
-+ if (status & UTSR0_TFS)
-+ micro_tx_chars(micro);
-+
-+ status = readl(micro->base + UTSR0);
-+
-+ } while (((tx->index < tx->len) && (status & UTSR0_TFS)) ||
-+ (status & (UTSR0_RFS | UTSR0_RID)));
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static struct mfd_cell micro_cells[] = {
-+ { .name = "ipaq-micro-backlight", },
-+ { .name = "ipaq-micro-battery", },
-+ { .name = "ipaq-micro-keys", },
-+ { .name = "ipaq-micro-ts", },
-+ { .name = "ipaq-micro-leds", },
-+};
-+
-+static int micro_suspend(struct device *dev)
-+{
-+ return 0;
-+}
-+
-+static int micro_resume(struct device *dev)
-+{
-+ struct ipaq_micro *micro = dev_get_drvdata(dev);
-+
-+ micro_reset_comm(micro);
-+ mdelay(10);
-+
-+ return 0;
-+}
-+
-+static int micro_probe(struct platform_device *pdev)
-+{
-+ struct ipaq_micro *micro;
-+ struct resource *res;
-+ int ret;
-+ int irq;
-+
-+ micro = devm_kzalloc(&pdev->dev, sizeof(*micro), GFP_KERNEL);
-+ if (!micro)
-+ return -ENOMEM;
-+
-+ micro->dev = &pdev->dev;
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!res)
-+ return -EINVAL;
-+
-+ micro->base = devm_request_and_ioremap(&pdev->dev, res);
-+ if (!micro->base)
-+ return -ENOMEM;
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-+ if (!res)
-+ return -EINVAL;
-+
-+ micro->sdlc = devm_request_and_ioremap(&pdev->dev, res);
-+ if (!micro->sdlc)
-+ return -ENOMEM;
-+
-+ micro_reset_comm(micro);
-+
-+ irq = platform_get_irq(pdev, 0);
-+ if (!irq)
-+ return -EINVAL;
-+ ret = devm_request_irq(&pdev->dev, irq, micro_serial_isr,
-+ IRQF_SHARED, "ipaq-micro",
-+ micro);
-+ if (ret) {
-+ dev_err(&pdev->dev, "unable to grab serial port IRQ\n");
-+ return ret;
-+ } else
-+ dev_info(&pdev->dev, "grabbed serial port IRQ\n");
-+
-+ spin_lock_init(µ->lock);
-+ INIT_LIST_HEAD(µ->queue);
-+ platform_set_drvdata(pdev, micro);
-+
-+ ret = mfd_add_devices(&pdev->dev, pdev->id, micro_cells,
-+ ARRAY_SIZE(micro_cells), NULL, 0, NULL);
-+ if (ret) {
-+ dev_err(&pdev->dev, "error adding MFD cells");
-+ return ret;
-+ }
-+
-+ /* Check version */
-+ ipaq_micro_get_version(micro);
-+ dev_info(&pdev->dev, "Atmel micro ASIC version %s\n", micro->version);
-+ ipaq_micro_eeprom_dump(micro);
-+
-+ return 0;
-+}
-+
-+static int micro_remove(struct platform_device *pdev)
-+{
-+ struct ipaq_micro *micro = platform_get_drvdata(pdev);
-+ u32 val;
-+
-+ mfd_remove_devices(&pdev->dev);
-+
-+ val = readl(micro->base + UTCR3);
-+ val &= ~(UTCR3_RXE | UTCR3_RIE); /* disable receive interrupt */
-+ val &= ~(UTCR3_TXE | UTCR3_TIE); /* disable transmit interrupt */
-+ writel(val, micro->base + UTCR3);
-+
-+ return 0;
-+}
-+
-+static const struct dev_pm_ops micro_dev_pm_ops = {
-+ SET_SYSTEM_SLEEP_PM_OPS(micro_suspend, micro_resume)
-+};
-+
-+static struct platform_driver micro_device_driver = {
-+ .driver = {
-+ .name = "ipaq-h3xxx-micro",
-+ .pm = µ_dev_pm_ops,
-+ },
-+ .probe = micro_probe,
-+ .remove = micro_remove,
-+ /* .shutdown = micro_suspend, // FIXME */
-+};
-+module_platform_driver(micro_device_driver);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_DESCRIPTION("driver for iPAQ Atmel micro core and backlight");
-diff --git a/include/linux/mfd/ipaq-micro.h b/include/linux/mfd/ipaq-micro.h
-new file mode 100644
-index 000000000000..5c4d29f6674f
---- /dev/null
-+++ b/include/linux/mfd/ipaq-micro.h
-@@ -0,0 +1,148 @@
-+/*
-+ * Header file for the compaq Micro MFD
-+ */
-+
-+#ifndef _MFD_IPAQ_MICRO_H_
-+#define _MFD_IPAQ_MICRO_H_
-+
-+#include <linux/spinlock.h>
-+#include <linux/completion.h>
-+#include <linux/list.h>
-+
-+#define TX_BUF_SIZE 32
-+#define RX_BUF_SIZE 16
-+#define CHAR_SOF 0x02
-+
-+/*
-+ * These are the different messages that can be sent to the microcontroller
-+ * to control various aspects.
-+ */
-+#define MSG_VERSION 0x0
-+#define MSG_KEYBOARD 0x2
-+#define MSG_TOUCHSCREEN 0x3
-+#define MSG_EEPROM_READ 0x4
-+#define MSG_EEPROM_WRITE 0x5
-+#define MSG_THERMAL_SENSOR 0x6
-+#define MSG_NOTIFY_LED 0x8
-+#define MSG_BATTERY 0x9
-+#define MSG_SPI_READ 0xb
-+#define MSG_SPI_WRITE 0xc
-+#define MSG_BACKLIGHT 0xd /* H3600 only */
-+#define MSG_CODEC_CTRL 0xe /* H3100 only */
-+#define MSG_DISPLAY_CTRL 0xf /* H3100 only */
-+
-+/* state of receiver parser */
-+enum rx_state {
-+ STATE_SOF = 0, /* Next byte should be start of frame */
-+ STATE_ID, /* Next byte is ID & message length */
-+ STATE_DATA, /* Next byte is a data byte */
-+ STATE_CHKSUM /* Next byte should be checksum */
-+};
-+
-+/**
-+ * struct ipaq_micro_txdev - TX state
-+ * @len: length of message in TX buffer
-+ * @index: current index into TX buffer
-+ * @buf: TX buffer
-+ */
-+struct ipaq_micro_txdev {
-+ u8 len;
-+ u8 index;
-+ u8 buf[TX_BUF_SIZE];
-+};
-+
-+/**
-+ * struct ipaq_micro_rxdev - RX state
-+ * @state: context of RX state machine
-+ * @chksum: calculated checksum
-+ * @id: message ID from packet
-+ * @len: RX buffer length
-+ * @index: RX buffer index
-+ * @buf: RX buffer
-+ */
-+struct ipaq_micro_rxdev {
-+ enum rx_state state;
-+ unsigned char chksum;
-+ u8 id;
-+ unsigned int len;
-+ unsigned int index;
-+ u8 buf[RX_BUF_SIZE];
-+};
-+
-+/**
-+ * struct ipaq_micro_msg - message to the iPAQ microcontroller
-+ * @id: 4-bit ID of the message
-+ * @tx_len: length of TX data
-+ * @tx_data: TX data to send
-+ * @rx_len: length of receieved RX data
-+ * @rx_data: RX data to recieve
-+ * @ack: a completion that will be completed when RX is complete
-+ * @node: list node if message gets queued
-+ */
-+struct ipaq_micro_msg {
-+ u8 id;
-+ u8 tx_len;
-+ u8 tx_data[TX_BUF_SIZE];
-+ u8 rx_len;
-+ u8 rx_data[RX_BUF_SIZE];
-+ struct completion ack;
-+ struct list_head node;
-+};
-+
-+/**
-+ * struct ipaq_micro - iPAQ microcontroller state
-+ * @dev: corresponding platform device
-+ * @base: virtual memory base for underlying serial device
-+ * @sdlc: virtual memory base for Synchronous Data Link Controller
-+ * @version: version string
-+ * @tx: TX state
-+ * @rx: RX state
-+ * @lock: lock for this state container
-+ * @msg: current message
-+ * @queue: message queue
-+ * @key: callback for asynchronous key events
-+ * @key_data: data to pass along with key events
-+ * @ts: callback for asynchronous touchscreen events
-+ * @ts_data: data to pass along with key events
-+ */
-+struct ipaq_micro {
-+ struct device *dev;
-+ void __iomem *base;
-+ void __iomem *sdlc;
-+ char version[5];
-+ struct ipaq_micro_txdev tx; /* transmit ISR state */
-+ struct ipaq_micro_rxdev rx; /* receive ISR state */
-+ spinlock_t lock;
-+ struct ipaq_micro_msg *msg;
-+ struct list_head queue;
-+ void (*key) (void *data, int len, unsigned char *rxdata);
-+ void *key_data;
-+ void (*ts) (void *data, int len, unsigned char *rxdata);
-+ void *ts_data;
-+};
-+
-+extern int
-+ipaq_micro_tx_msg(struct ipaq_micro *micro, struct ipaq_micro_msg *msg);
-+
-+static inline int
-+ipaq_micro_tx_msg_sync(struct ipaq_micro *micro,
-+ struct ipaq_micro_msg *msg)
-+{
-+ int ret;
-+
-+ init_completion(&msg->ack);
-+ ret = ipaq_micro_tx_msg(micro, msg);
-+ wait_for_completion(&msg->ack);
-+
-+ return ret;
-+}
-+
-+static inline int
-+ipaq_micro_tx_msg_async(struct ipaq_micro *micro,
-+ struct ipaq_micro_msg *msg)
-+{
-+ init_completion(&msg->ack);
-+ return ipaq_micro_tx_msg(micro, msg);
-+}
-+
-+#endif /* _MFD_IPAQ_MICRO_H_ */
---
-1.9.0
-
diff --git a/recipes-kernel/linux/linux-yocto-dev/h3600/0002-ARM-sa1100-add-Micro-ASIC-platform-device.patch b/recipes-kernel/linux/linux-yocto-dev/h3600/0002-ARM-sa1100-add-Micro-ASIC-platform-device.patch
deleted file mode 100644
index 8bb2439..0000000
--- a/recipes-kernel/linux/linux-yocto-dev/h3600/0002-ARM-sa1100-add-Micro-ASIC-platform-device.patch
+++ /dev/null
@@ -1,73 +0,0 @@
-From b8d45042ceaae1b0a5a86c8a0a9c1da7aae5c248 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij at linaro.org>
-Date: Thu, 17 Oct 2013 15:03:17 +0200
-Subject: [PATCH 2/7] ARM: sa1100: add Micro ASIC platform device
-
-This adds the Atmel Micro ASIC platform device and selects it
-by default for h3100 and h3600.
-
-Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
----
- arch/arm/mach-sa1100/Kconfig | 2 ++
- arch/arm/mach-sa1100/h3xxx.c | 15 +++++++++++++++
- 2 files changed, 17 insertions(+)
-
-diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig
-index 04f9784ff0ed..c6f6ed1cbed0 100644
---- a/arch/arm/mach-sa1100/Kconfig
-+++ b/arch/arm/mach-sa1100/Kconfig
-@@ -58,6 +58,7 @@ config SA1100_H3100
- bool "Compaq iPAQ H3100"
- select ARM_SA1110_CPUFREQ
- select HTC_EGPIO
-+ select MFD_IPAQ_MICRO
- help
- Say Y here if you intend to run this kernel on the Compaq iPAQ
- H3100 handheld computer. Information about this machine and the
-@@ -69,6 +70,7 @@ config SA1100_H3600
- bool "Compaq iPAQ H3600/H3700"
- select ARM_SA1110_CPUFREQ
- select HTC_EGPIO
-+ select MFD_IPAQ_MICRO
- help
- Say Y here if you intend to run this kernel on the Compaq iPAQ
- H3600 handheld computer. Information about this machine and the
-diff --git a/arch/arm/mach-sa1100/h3xxx.c b/arch/arm/mach-sa1100/h3xxx.c
-index f17e7382242a..814dcecf00c4 100644
---- a/arch/arm/mach-sa1100/h3xxx.c
-+++ b/arch/arm/mach-sa1100/h3xxx.c
-@@ -25,6 +25,7 @@
- #include <asm/mach/map.h>
-
- #include <mach/h3xxx.h>
-+#include <mach/irqs.h>
-
- #include "generic.h"
-
-@@ -248,9 +249,23 @@ static struct platform_device h3xxx_keys = {
- },
- };
-
-+static struct resource h3xxx_micro_resources[] = {
-+ DEFINE_RES_MEM(0x80010000, SZ_4K),
-+ DEFINE_RES_MEM(0x80020000, SZ_4K),
-+ DEFINE_RES_IRQ(IRQ_Ser1UART),
-+};
-+
-+struct platform_device h3xxx_micro_asic = {
-+ .name = "ipaq-h3xxx-micro",
-+ .id = -1,
-+ .resource = h3xxx_micro_resources,
-+ .num_resources = ARRAY_SIZE(h3xxx_micro_resources),
-+};
-+
- static struct platform_device *h3xxx_devices[] = {
- &h3xxx_egpio,
- &h3xxx_keys,
-+ &h3xxx_micro_asic,
- };
-
- void __init h3xxx_mach_init(void)
---
-1.9.0
-
diff --git a/recipes-kernel/linux/linux-yocto-dev/h3600/0003-input-driver-for-microcontroller-keys-on-the-iPaq-h3.patch b/recipes-kernel/linux/linux-yocto-dev/h3600/0003-input-driver-for-microcontroller-keys-on-the-iPaq-h3.patch
deleted file mode 100644
index cb080e8..0000000
--- a/recipes-kernel/linux/linux-yocto-dev/h3600/0003-input-driver-for-microcontroller-keys-on-the-iPaq-h3.patch
+++ /dev/null
@@ -1,208 +0,0 @@
-From 96394b690b27fd3b4175b290a179e5e4e9138085 Mon Sep 17 00:00:00 2001
-From: Dmitry Artamonow <mad_soft at inbox.ru>
-Date: Sat, 21 Mar 2009 16:22:16 +0300
-Subject: [PATCH 3/7] input: driver for microcontroller keys on the iPaq h3xxx
-
-This adds a key input driver for the keys found on the h3xxx
-iPAQ series.
-
-Based on a driver from handhelds.org 2.6.21 kernel, written
-by Alessandro GARDICH.
-
-Signed-off-by: Alessandro GARDICH <gremlin at gremlin.it>
-Signed-off-by: Dmitry Artamonow <mad_soft at inbox.ru>
-Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
----
- drivers/input/keyboard/Kconfig | 7 ++
- drivers/input/keyboard/Makefile | 1 +
- drivers/input/keyboard/ipaq-micro-keys.c | 148 +++++++++++++++++++++++++++++++
- 3 files changed, 156 insertions(+)
- create mode 100644 drivers/input/keyboard/ipaq-micro-keys.c
-
-diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
-index a673c9f3a0b9..8d4892dfa6e2 100644
---- a/drivers/input/keyboard/Kconfig
-+++ b/drivers/input/keyboard/Kconfig
-@@ -554,6 +554,13 @@ config KEYBOARD_DAVINCI
- To compile this driver as a module, choose M here: the
- module will be called davinci_keyscan.
-
-+config KEYBOARD_IPAQ_MICRO
-+ tristate "Buttons on Micro SoC (iPaq h3100,h3600,h3700)"
-+ depends on MFD_IPAQ_MICRO
-+ help
-+ This enables support for the buttons attached to
-+ Micro peripheral controller on iPAQ h3100/h3600/h3700
-+
- config KEYBOARD_OMAP
- tristate "TI OMAP keypad support"
- depends on ARCH_OMAP1
-diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
-index a699b6172303..e776af737804 100644
---- a/drivers/input/keyboard/Makefile
-+++ b/drivers/input/keyboard/Makefile
-@@ -21,6 +21,7 @@ obj-$(CONFIG_KEYBOARD_TCA6416) += tca6416-keypad.o
- obj-$(CONFIG_KEYBOARD_TCA8418) += tca8418_keypad.o
- obj-$(CONFIG_KEYBOARD_HIL) += hil_kbd.o
- obj-$(CONFIG_KEYBOARD_HIL_OLD) += hilkbd.o
-+obj-$(CONFIG_KEYBOARD_IPAQ_MICRO) += ipaq-micro-keys.o
- obj-$(CONFIG_KEYBOARD_IMX) += imx_keypad.o
- obj-$(CONFIG_KEYBOARD_HP6XX) += jornada680_kbd.o
- obj-$(CONFIG_KEYBOARD_HP7XX) += jornada720_kbd.o
-diff --git a/drivers/input/keyboard/ipaq-micro-keys.c b/drivers/input/keyboard/ipaq-micro-keys.c
-new file mode 100644
-index 000000000000..7ca8b738cc73
---- /dev/null
-+++ b/drivers/input/keyboard/ipaq-micro-keys.c
-@@ -0,0 +1,148 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * h3600 atmel micro companion support, key subdevice
-+ * based on previous kernel 2.4 version
-+ * Author : Alessandro Gardich <gremlin at gremlin.it>
-+ * Author : Linus Walleij <linus.walleij at linaro.org>
-+ *
-+ */
-+
-+
-+#include <linux/module.h>
-+#include <linux/version.h>
-+
-+#include <linux/init.h>
-+#include <linux/fs.h>
-+#include <linux/interrupt.h>
-+#include <linux/sched.h>
-+#include <linux/pm.h>
-+#include <linux/sysctl.h>
-+#include <linux/proc_fs.h>
-+#include <linux/delay.h>
-+#include <linux/device.h>
-+#include <linux/input.h>
-+#include <linux/platform_device.h>
-+#include <linux/mfd/ipaq-micro.h>
-+
-+struct ipaq_micro_keys {
-+ struct ipaq_micro *micro;
-+ struct input_dev *input;
-+};
-+
-+static int keycodes[] = {
-+ KEY_RECORD, /* 1: Record button */
-+ KEY_CALENDAR, /* 2: Calendar */
-+ KEY_ADDRESSBOOK, /* 3: Contacts (looks like Outlook) */
-+ KEY_MAIL, /* 4: Envelope (Q on older iPAQs) */
-+ KEY_HOMEPAGE, /* 5: Start (looks like swoopy arrow) */
-+ KEY_UP, /* 6: Up */
-+ KEY_RIGHT, /* 7: Right */
-+ KEY_LEFT, /* 8: Left */
-+ KEY_DOWN, /* 9: Down */
-+};
-+
-+static void micro_key_receive(void *data, int len, unsigned char *msg)
-+{
-+ struct ipaq_micro_keys *keys = data;
-+ int key, down;
-+
-+ down = (0x80 & msg[0]) ? 1 : 0;
-+ key = 0x7f & msg[0];
-+
-+ if (key < ARRAY_SIZE(keycodes)) {
-+ input_report_key(keys->input, keycodes[key], down);
-+ input_sync(keys->input);
-+ }
-+}
-+
-+static int micro_key_probe(struct platform_device *pdev)
-+{
-+ struct ipaq_micro_keys *keys;
-+ int ret;
-+ int i;
-+
-+ keys = devm_kzalloc(&pdev->dev, sizeof(*keys), GFP_KERNEL);
-+ if (!keys)
-+ return -ENOMEM;
-+ keys->input = input_allocate_device();
-+ if (!keys->input)
-+ return -ENOMEM;
-+ keys->micro = dev_get_drvdata(pdev->dev.parent);
-+ keys->input->evbit[0] = BIT(EV_KEY);
-+ set_bit(EV_KEY, keys->input->evbit);
-+ for (i = 0; i < ARRAY_SIZE(keycodes); i++)
-+ set_bit(keycodes[i], keys->input->keybit);
-+
-+ keys->input->name = "h3600 micro keys";
-+
-+ ret = input_register_device(keys->input);
-+ if (ret)
-+ return ret;
-+
-+ platform_set_drvdata(pdev, keys);
-+ spin_lock(&keys->micro->lock);
-+ keys->micro->key = micro_key_receive;
-+ keys->micro->key_data = keys;
-+ spin_unlock(&keys->micro->lock);
-+
-+ return 0;
-+}
-+
-+static int micro_key_remove(struct platform_device *pdev)
-+{
-+ struct ipaq_micro_keys *keys = platform_get_drvdata(pdev);
-+
-+ input_unregister_device(keys->input);
-+
-+ spin_lock(&keys->micro->lock);
-+ keys->micro->key = NULL;
-+ keys->micro->key_data = NULL;
-+ spin_unlock(&keys->micro->lock);
-+
-+ return 0;
-+}
-+
-+static int micro_key_suspend(struct device *dev)
-+{
-+ struct ipaq_micro_keys *keys = dev_get_drvdata(dev);
-+
-+ spin_lock(&keys->micro->lock);
-+ keys->micro->key = NULL;
-+ keys->micro->key_data = NULL;
-+ spin_unlock(&keys->micro->lock);
-+
-+ return 0;
-+}
-+
-+static int micro_key_resume(struct device *dev)
-+{
-+ struct ipaq_micro_keys *keys = dev_get_drvdata(dev);
-+
-+ spin_lock(&keys->micro->lock);
-+ keys->micro->key = micro_key_receive;
-+ keys->micro->key_data = keys;
-+ spin_unlock(&keys->micro->lock);
-+
-+ return 0;
-+}
-+
-+static const struct dev_pm_ops micro_key_dev_pm_ops = {
-+ SET_SYSTEM_SLEEP_PM_OPS(micro_key_suspend, micro_key_resume)
-+};
-+
-+struct platform_driver micro_key_device_driver = {
-+ .driver = {
-+ .name = "ipaq-micro-keys",
-+ .pm = µ_key_dev_pm_ops,
-+ },
-+ .probe = micro_key_probe,
-+ .remove = micro_key_remove,
-+};
-+module_platform_driver(micro_key_device_driver);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_DESCRIPTION("driver for iPAQ Atmel micro keys");
-+MODULE_ALIAS("platform:ipaq-micro-keys");
---
-1.9.0
-
diff --git a/recipes-kernel/linux/linux-yocto-dev/h3600/0004-fb-backlight-add-driver-for-iPAQ-micro-backlight.patch b/recipes-kernel/linux/linux-yocto-dev/h3600/0004-fb-backlight-add-driver-for-iPAQ-micro-backlight.patch
deleted file mode 100644
index 2c81a9b..0000000
--- a/recipes-kernel/linux/linux-yocto-dev/h3600/0004-fb-backlight-add-driver-for-iPAQ-micro-backlight.patch
+++ /dev/null
@@ -1,147 +0,0 @@
-From 2444e6fcd6c313e3cfdee58d692fe88a4bbc8fb8 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij at linaro.org>
-Date: Fri, 8 Nov 2013 10:09:13 +0100
-Subject: [PATCH 4/7] fb: backlight: add driver for iPAQ micro backlight
-
-This adds a driver for the backlight controlled by the microcontroller
-on the Compaq iPAQ series of handheld computers: h3100, h3600
-and h3700.
-
-Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
----
- drivers/video/backlight/Kconfig | 9 ++++
- drivers/video/backlight/Makefile | 1 +
- drivers/video/backlight/ipaq_micro_bl.c | 89 +++++++++++++++++++++++++++++++++
- 3 files changed, 99 insertions(+)
- create mode 100644 drivers/video/backlight/ipaq_micro_bl.c
-
-diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
-index 5a3eb2ecb525..ed2d61062907 100644
---- a/drivers/video/backlight/Kconfig
-+++ b/drivers/video/backlight/Kconfig
-@@ -207,6 +207,15 @@ config BACKLIGHT_GENERIC
- known as the Corgi backlight driver. If you have a Sharp Zaurus
- SL-C7xx, SL-Cxx00 or SL-6000x say y.
-
-+config BACKLIGHT_IPAQ_MICRO
-+ tristate "iPAQ microcontroller backlight driver"
-+ depends on MFD_IPAQ_MICRO
-+ default y
-+ help
-+ Say y to enable the backlight driver for Compaq iPAQ handheld
-+ computers. Say yes if you have one of the h3100/h3600/h3700
-+ machines.
-+
- config BACKLIGHT_LM3533
- tristate "Backlight Driver for LM3533"
- depends on BACKLIGHT_CLASS_DEVICE
-diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
-index bb820024f346..a9ea34a39cad 100644
---- a/drivers/video/backlight/Makefile
-+++ b/drivers/video/backlight/Makefile
-@@ -36,6 +36,7 @@ obj-$(CONFIG_BACKLIGHT_GENERIC) += generic_bl.o
- obj-$(CONFIG_BACKLIGHT_GPIO) += gpio_backlight.o
- obj-$(CONFIG_BACKLIGHT_HP680) += hp680_bl.o
- obj-$(CONFIG_BACKLIGHT_HP700) += jornada720_bl.o
-+obj-$(CONFIG_BACKLIGHT_IPAQ_MICRO) += ipaq_micro_bl.o
- obj-$(CONFIG_BACKLIGHT_LM3533) += lm3533_bl.o
- obj-$(CONFIG_BACKLIGHT_LM3630A) += lm3630a_bl.o
- obj-$(CONFIG_BACKLIGHT_LM3639) += lm3639_bl.o
-diff --git a/drivers/video/backlight/ipaq_micro_bl.c b/drivers/video/backlight/ipaq_micro_bl.c
-new file mode 100644
-index 000000000000..b7ec8c453b61
---- /dev/null
-+++ b/drivers/video/backlight/ipaq_micro_bl.c
-@@ -0,0 +1,89 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * iPAQ microcontroller backlight support
-+ * Author : Linus Walleij <linus.walleij at linaro.org>
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/backlight.h>
-+#include <linux/mfd/ipaq-micro.h>
-+#include <linux/fb.h>
-+#include <linux/err.h>
-+
-+static int micro_bl_update_status(struct backlight_device *bd)
-+{
-+ struct ipaq_micro *micro = dev_get_drvdata(&bd->dev);
-+ int intensity = bd->props.brightness;
-+ struct ipaq_micro_msg msg = {
-+ .id = MSG_BACKLIGHT,
-+ .tx_len = 3,
-+ };
-+
-+ if (bd->props.power != FB_BLANK_UNBLANK)
-+ intensity = 0;
-+ if (bd->props.state & BL_CORE_FBBLANK)
-+ intensity = 0;
-+ if (bd->props.state & BL_CORE_SUSPENDED)
-+ intensity = 0;
-+
-+ msg.tx_data[0] = 0x01;
-+ msg.tx_data[1] = intensity > 0 ? 1 : 0;
-+ msg.tx_data[2] = intensity;
-+ return ipaq_micro_tx_msg_sync(micro, &msg);
-+}
-+
-+static const struct backlight_ops micro_bl_ops = {
-+ .options = BL_CORE_SUSPENDRESUME,
-+ .update_status = micro_bl_update_status,
-+};
-+
-+static struct backlight_properties micro_bl_props = {
-+ .type = BACKLIGHT_RAW,
-+ .max_brightness = 255,
-+ .power = FB_BLANK_UNBLANK,
-+ .brightness = 64,
-+};
-+
-+static int micro_backlight_probe(struct platform_device *pdev)
-+{
-+ struct backlight_device *bd;
-+ struct ipaq_micro *micro = dev_get_drvdata(pdev->dev.parent);
-+
-+ bd = devm_backlight_device_register(
-+ &pdev->dev,
-+ "ipaq-micro-backlight",
-+ &pdev->dev,
-+ micro,
-+ µ_bl_ops,
-+ µ_bl_props);
-+ if (IS_ERR(bd))
-+ return PTR_ERR(bd);
-+ platform_set_drvdata(pdev, bd);
-+ backlight_update_status(bd);
-+ dev_info(&pdev->dev, "iPAQ micro backlight driver\n");
-+
-+ return 0;
-+}
-+
-+static int micro_backlight_remove(struct platform_device *pdev)
-+{
-+ return 0;
-+}
-+
-+struct platform_driver micro_backlight_device_driver = {
-+ .driver = {
-+ .name = "ipaq-micro-backlight",
-+ },
-+ .probe = micro_backlight_probe,
-+ .remove = micro_backlight_remove,
-+};
-+module_platform_driver(micro_backlight_device_driver);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_DESCRIPTION("driver for iPAQ Atmel micro backlight");
-+MODULE_ALIAS("platform:ipaq-micro-backlight");
---
-1.9.0
-
diff --git a/recipes-kernel/linux/linux-yocto-dev/h3600/0005-input-driver-for-touchscreen-on-iPaq-h3xxx.patch b/recipes-kernel/linux/linux-yocto-dev/h3600/0005-input-driver-for-touchscreen-on-iPaq-h3xxx.patch
deleted file mode 100644
index 96f640d..0000000
--- a/recipes-kernel/linux/linux-yocto-dev/h3600/0005-input-driver-for-touchscreen-on-iPaq-h3xxx.patch
+++ /dev/null
@@ -1,198 +0,0 @@
-From 4f2952cd1fa1fcfd49de628dcba97a758f81ac3a Mon Sep 17 00:00:00 2001
-From: Dmitry Artamonow <mad_soft at inbox.ru>
-Date: Sat, 21 Mar 2009 16:27:19 +0300
-Subject: [PATCH 5/7] input: driver for touchscreen on iPaq h3xxx
-
-This adds a driver for the touchscreen connected to the
-Atmel microcontroller on the iPAQ h3xxx series.
-
-Based on a driver from handhelds.org 2.6.21 kernel, written
-by Alessandro GARDICH.
-
-Signed-off-by: Alessandro GARDICH <gremlin at gremlin.it>
-Signed-off-by: Dmitry Artamonow <mad_soft at inbox.ru>
-Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
----
- drivers/input/touchscreen/Kconfig | 8 ++
- drivers/input/touchscreen/Makefile | 1 +
- drivers/input/touchscreen/ipaq-micro-ts.c | 137 ++++++++++++++++++++++++++++++
- 3 files changed, 146 insertions(+)
- create mode 100644 drivers/input/touchscreen/ipaq-micro-ts.c
-
-diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
-index 07e9e82029d1..118d71b39861 100644
---- a/drivers/input/touchscreen/Kconfig
-+++ b/drivers/input/touchscreen/Kconfig
-@@ -466,6 +466,14 @@ config TOUCHSCREEN_HP7XX
- To compile this driver as a module, choose M here: the
- module will be called jornada720_ts.
-
-+config TOUCHSCREEN_IPAQ_MICRO
-+ tristate "HP iPAQ Atmel Micro ASIC touchscreen"
-+ depends on MFD_IPAQ_MICRO
-+ help
-+ This enables support for the touchscreen attached to
-+ the Atmel Micro peripheral controller on iPAQ h3100/h3600/h3700
-+
-+
- config TOUCHSCREEN_HTCPEN
- tristate "HTC Shift X9500 touchscreen"
- depends on ISA
-diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
-index 62801f213346..5f754c4f87bb 100644
---- a/drivers/input/touchscreen/Makefile
-+++ b/drivers/input/touchscreen/Makefile
-@@ -46,6 +46,7 @@ obj-$(CONFIG_TOUCHSCREEN_MTOUCH) += mtouch.o
- obj-$(CONFIG_TOUCHSCREEN_MK712) += mk712.o
- obj-$(CONFIG_TOUCHSCREEN_HP600) += hp680_ts_input.o
- obj-$(CONFIG_TOUCHSCREEN_HP7XX) += jornada720_ts.o
-+obj-$(CONFIG_TOUCHSCREEN_IPAQ_MICRO) += ipaq-micro-ts.o
- obj-$(CONFIG_TOUCHSCREEN_HTCPEN) += htcpen.o
- obj-$(CONFIG_TOUCHSCREEN_USB_COMPOSITE) += usbtouchscreen.o
- obj-$(CONFIG_TOUCHSCREEN_PCAP) += pcap_ts.o
-diff --git a/drivers/input/touchscreen/ipaq-micro-ts.c b/drivers/input/touchscreen/ipaq-micro-ts.c
-new file mode 100644
-index 000000000000..9c5e1b62d192
---- /dev/null
-+++ b/drivers/input/touchscreen/ipaq-micro-ts.c
-@@ -0,0 +1,137 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * h3600 atmel micro companion support, touchscreen subdevice
-+ * Author : Alessandro Gardich <gremlin at gremlin.it>
-+ * Author : Linus Walleij <linus.walleij at linaro.org>
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/pm.h>
-+#include <linux/delay.h>
-+#include <linux/device.h>
-+#include <linux/input.h>
-+#include <linux/platform_device.h>
-+#include <linux/slab.h>
-+#include <linux/mfd/ipaq-micro.h>
-+
-+struct touchscreen_data {
-+ struct input_dev *input;
-+ struct ipaq_micro *micro;
-+};
-+
-+static void micro_ts_receive(void *data, int len, unsigned char *msg)
-+{
-+ struct touchscreen_data *ts = data;
-+
-+ if (len == 4) {
-+ input_report_abs(ts->input, ABS_X, (msg[2]<<8)+msg[3]);
-+ input_report_abs(ts->input, ABS_Y, (msg[0]<<8)+msg[1]);
-+ input_report_abs(ts->input, ABS_PRESSURE, 1);
-+ input_report_key(ts->input, BTN_TOUCH, 0);
-+ }
-+ if (len == 0) {
-+ input_report_abs(ts->input, ABS_X, 0);
-+ input_report_abs(ts->input, ABS_Y, 0);
-+ input_report_abs(ts->input, ABS_PRESSURE, 0);
-+ input_report_key(ts->input, BTN_TOUCH, 1);
-+ }
-+ input_sync(ts->input);
-+}
-+
-+
-+static int micro_ts_probe(struct platform_device *pdev)
-+{
-+ struct touchscreen_data *ts;
-+ int ret;
-+
-+ ts = devm_kzalloc(&pdev->dev, sizeof(*ts), GFP_KERNEL);
-+ if (!ts)
-+ return -ENOMEM;
-+ ts->micro = dev_get_drvdata(pdev->dev.parent);
-+
-+ platform_set_drvdata(pdev, ts);
-+
-+ ts->input = input_allocate_device();
-+
-+ ts->input->evbit[0] = BIT(EV_ABS);
-+ ts->input->absbit[0] = BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE);
-+ input_set_abs_params(ts->input, ABS_X, 0, 1023, 0, 0);
-+ input_set_abs_params(ts->input, ABS_Y, 0, 1023, 0, 0);
-+ input_set_abs_params(ts->input, ABS_PRESSURE, 0x0, 0x1, 0, 0);
-+
-+ ts->input->name = "ipaq micro ts";
-+ /* ts->input->private = ts; */
-+
-+ ret = input_register_device(ts->input);
-+ if (ret) {
-+ dev_err(&pdev->dev, "error registering touch input\n");
-+ return ret;
-+ }
-+
-+ spin_lock(&ts->micro->lock);
-+ ts->micro->ts = micro_ts_receive;
-+ ts->micro->ts_data = ts;
-+ spin_unlock(&ts->micro->lock);
-+
-+ dev_info(&pdev->dev, "iPAQ micro touchscreen\n");
-+ return 0;
-+}
-+
-+static int micro_ts_remove(struct platform_device *pdev)
-+{
-+ struct touchscreen_data *ts = platform_get_drvdata(pdev);
-+
-+ spin_lock(&ts->micro->lock);
-+ ts->micro->ts = NULL;
-+ ts->micro->ts_data = NULL;
-+ spin_unlock(&ts->micro->lock);
-+ input_unregister_device(ts->input);
-+
-+ return 0;
-+}
-+
-+static int micro_ts_suspend(struct device *dev)
-+{
-+ struct touchscreen_data *ts = dev_get_drvdata(dev);
-+
-+ spin_lock(&ts->micro->lock);
-+ ts->micro->ts = NULL;
-+ ts->micro->ts_data = NULL;
-+ spin_unlock(&ts->micro->lock);
-+ return 0;
-+}
-+
-+static int micro_ts_resume(struct device *dev)
-+{
-+ struct touchscreen_data *ts = dev_get_drvdata(dev);
-+
-+ spin_lock(&ts->micro->lock);
-+ ts->micro->ts = micro_ts_receive;
-+ ts->micro->ts_data = ts;
-+ spin_unlock(&ts->micro->lock);
-+ return 0;
-+}
-+
-+static const struct dev_pm_ops micro_ts_dev_pm_ops = {
-+ SET_SYSTEM_SLEEP_PM_OPS(micro_ts_suspend, micro_ts_resume)
-+};
-+
-+struct platform_driver micro_ts_device_driver = {
-+ .driver = {
-+ .name = "ipaq-micro-ts",
-+ .pm = µ_ts_dev_pm_ops,
-+ },
-+ .probe = micro_ts_probe,
-+ .remove = micro_ts_remove,
-+};
-+module_platform_driver(micro_ts_device_driver);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_DESCRIPTION("driver for iPAQ Atmel micro touchscreen");
-+MODULE_ALIAS("platform:ipaq-micro-ts");
---
-1.9.0
-
diff --git a/recipes-kernel/linux/linux-yocto-dev/h3600/0006-leds-add-driver-for-the-iPAQ-micro.patch b/recipes-kernel/linux/linux-yocto-dev/h3600/0006-leds-add-driver-for-the-iPAQ-micro.patch
deleted file mode 100644
index 212d366..0000000
--- a/recipes-kernel/linux/linux-yocto-dev/h3600/0006-leds-add-driver-for-the-iPAQ-micro.patch
+++ /dev/null
@@ -1,193 +0,0 @@
-From b4c8a1cdfbbaf615a6d9da3e46f1b788fc0f1568 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij at linaro.org>
-Date: Thu, 31 Oct 2013 10:53:06 -0700
-Subject: [PATCH 6/7] leds: add driver for the iPAQ micro
-
-This adds a driver for the iPAQ microcontroller LED.
-
-Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
----
- drivers/leds/Kconfig | 7 +++
- drivers/leds/Makefile | 1 +
- drivers/leds/leds-ipaq-micro.c | 139 +++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 147 insertions(+)
- create mode 100644 drivers/leds/leds-ipaq-micro.c
-
-diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
-index 72156c123033..39dae8a15297 100644
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -143,6 +143,13 @@ config LEDS_SUNFIRE
- This option enables support for the Left, Middle, and Right
- LEDs on the I/O and CPU boards of SunFire UltraSPARC servers.
-
-+config LEDS_IPAQ_MICRO
-+ tristate "LED Support for the Compaq iPAQ h3xxx"
-+ depends on MFD_IPAQ_MICRO
-+ help
-+ Choose this option if you want to use the notification LED on
-+ Compaq/HP iPAQ h3100 and h3600.
-+
- config LEDS_HP6XX
- tristate "LED Support for the HP Jornada 6xx"
- depends on LEDS_CLASS
-diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
-index 3cd76dbd9be2..db0e6e856ca9 100644
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -31,6 +31,7 @@ obj-$(CONFIG_LEDS_LP8501) += leds-lp8501.o
- obj-$(CONFIG_LEDS_LP8788) += leds-lp8788.o
- obj-$(CONFIG_LEDS_TCA6507) += leds-tca6507.o
- obj-$(CONFIG_LEDS_CLEVO_MAIL) += leds-clevo-mail.o
-+obj-$(CONFIG_LEDS_IPAQ_MICRO) += leds-ipaq-micro.o
- obj-$(CONFIG_LEDS_HP6XX) += leds-hp6xx.o
- obj-$(CONFIG_LEDS_OT200) += leds-ot200.o
- obj-$(CONFIG_LEDS_FSG) += leds-fsg.o
-diff --git a/drivers/leds/leds-ipaq-micro.c b/drivers/leds/leds-ipaq-micro.c
-new file mode 100644
-index 000000000000..a716ec27f066
---- /dev/null
-+++ b/drivers/leds/leds-ipaq-micro.c
-@@ -0,0 +1,139 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * h3xxx atmel micro companion support, notification LED subdevice
-+ *
-+ * Author : Linus Walleij <linus.walleij at linaro.org>
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/mfd/ipaq-micro.h>
-+#include <linux/leds.h>
-+
-+#define LED_YELLOW 0x00
-+#define LED_GREEN 0x01
-+
-+#define LED_EN (1 << 4) /* LED ON/OFF 0:off, 1:on */
-+#define LED_AUTOSTOP (1 << 5) /* LED ON/OFF auto stop set 0:disable, 1:enable */
-+#define LED_ALWAYS (1 << 6) /* LED Interrupt Mask 0:No mask, 1:mask */
-+
-+static void micro_leds_brightness_set(struct led_classdev *led_cdev,
-+ enum led_brightness value)
-+{
-+ struct ipaq_micro *micro = dev_get_drvdata(led_cdev->dev->parent->parent);
-+ /*
-+ * In this message:
-+ * Byte 0 = LED color: 0 = yellow, 1 = green
-+ * yellow LED is always ~30 blinks per minute
-+ * Byte 1 = duration (flags?) appears to be ignored
-+ * Byte 2 = green ontime in 1/10 sec (deciseconds)
-+ * 1 = 1/10 second
-+ * 0 = 256/10 second
-+ * Byte 3 = green offtime in 1/10 sec (deciseconds)
-+ * 1 = 1/10 second
-+ * 0 = 256/10 seconds
-+ */
-+ struct ipaq_micro_msg msg = {
-+ .id = MSG_NOTIFY_LED,
-+ .tx_len = 4,
-+ };
-+
-+ msg.tx_data[0] = LED_GREEN;
-+ msg.tx_data[1] = 0;
-+ if (value) {
-+ msg.tx_data[2] = 0; /* Duty cycle 256 */
-+ msg.tx_data[3] = 1;
-+ } else {
-+ msg.tx_data[2] = 1;
-+ msg.tx_data[3] = 0; /* Duty cycle 256 */
-+ }
-+ ipaq_micro_tx_msg_sync(micro, &msg);
-+}
-+
-+/* Maximum duty cycle in ms 256/10 sec = 25600 ms */
-+#define IPAQ_LED_MAX_DUTY 25600
-+
-+static int micro_leds_blink_set(struct led_classdev *led_cdev,
-+ unsigned long *delay_on,
-+ unsigned long *delay_off)
-+{
-+ struct ipaq_micro *micro = dev_get_drvdata(led_cdev->dev->parent->parent);
-+ /*
-+ * In this message:
-+ * Byte 0 = LED color: 0 = yellow, 1 = green
-+ * yellow LED is always ~30 blinks per minute
-+ * Byte 1 = duration (flags?) appears to be ignored
-+ * Byte 2 = green ontime in 1/10 sec (deciseconds)
-+ * 1 = 1/10 second
-+ * 0 = 256/10 second
-+ * Byte 3 = green offtime in 1/10 sec (deciseconds)
-+ * 1 = 1/10 second
-+ * 0 = 256/10 seconds
-+ */
-+ struct ipaq_micro_msg msg = {
-+ .id = MSG_NOTIFY_LED,
-+ .tx_len = 4,
-+ };
-+
-+ msg.tx_data[0] = LED_GREEN;
-+ if (*delay_on > IPAQ_LED_MAX_DUTY ||
-+ *delay_off > IPAQ_LED_MAX_DUTY)
-+ return -EINVAL;
-+
-+ if (*delay_on == 0 && *delay_off == 0) {
-+ *delay_on = 100;
-+ *delay_off = 100;
-+ }
-+
-+ msg.tx_data[1] = 0;
-+ if (*delay_on >= IPAQ_LED_MAX_DUTY)
-+ msg.tx_data[2] = 0;
-+ else
-+ msg.tx_data[2] = (u8) DIV_ROUND_CLOSEST(*delay_on, 100);
-+ if (*delay_off >= IPAQ_LED_MAX_DUTY)
-+ msg.tx_data[3] = 0;
-+ else
-+ msg.tx_data[3] = (u8) DIV_ROUND_CLOSEST(*delay_off, 100);
-+ return ipaq_micro_tx_msg_sync(micro, &msg);
-+}
-+
-+static struct led_classdev micro_led = {
-+ .name = "notify",
-+ .brightness_set = micro_leds_brightness_set,
-+ .blink_set = micro_leds_blink_set,
-+ .flags = LED_CORE_SUSPENDRESUME,
-+};
-+
-+static int micro_leds_probe(struct platform_device *pdev)
-+{
-+ int ret;
-+
-+ ret = led_classdev_register(&pdev->dev, µ_led);
-+ if (ret)
-+ dev_err(&pdev->dev, "registering led failed: %d\n", ret);
-+ dev_info(&pdev->dev, "iPAQ micro notification LED driver\n");
-+
-+ return 0;
-+}
-+
-+static int micro_leds_remove(struct platform_device *pdev)
-+{
-+ led_classdev_unregister(µ_led);
-+ return 0;
-+}
-+
-+struct platform_driver micro_leds_device_driver = {
-+ .driver = {
-+ .name = "ipaq-micro-leds",
-+ },
-+ .probe = micro_leds_probe,
-+ .remove = micro_leds_remove,
-+};
-+module_platform_driver(micro_leds_device_driver);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_DESCRIPTION("driver for iPAQ Atmel micro leds");
-+MODULE_ALIAS("platform:ipaq-micro-leds");
---
-1.9.0
-
diff --git a/recipes-kernel/linux/linux-yocto-dev/h3600/0007-power-add-driver-for-battery-reading-on-iPaq-h3xxx.patch b/recipes-kernel/linux/linux-yocto-dev/h3600/0007-power-add-driver-for-battery-reading-on-iPaq-h3xxx.patch
deleted file mode 100644
index fb34e62..0000000
--- a/recipes-kernel/linux/linux-yocto-dev/h3600/0007-power-add-driver-for-battery-reading-on-iPaq-h3xxx.patch
+++ /dev/null
@@ -1,350 +0,0 @@
-From e6d787e84661a0bc3992fcf1d0c77075ca9b3b90 Mon Sep 17 00:00:00 2001
-From: Dmitry Artamonow <mad_soft at inbox.ru>
-Date: Sat, 21 Mar 2009 16:28:50 +0300
-Subject: [PATCH 7/7] power: add driver for battery reading on iPaq h3xxx
-
-This adds a driver for reading the battery status of the
-battery connected to the Atmel microcontroller on the
-iPAQ h3xxx series.
-
-Based on a driver from handhelds.org 2.6.21 kernel, written
-by Alessandro GARDICH.
-
-Signed-off-by: Dmitry Artamonow <mad_soft at inbox.ru>
-Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
----
- drivers/power/Kconfig | 7 +
- drivers/power/Makefile | 1 +
- drivers/power/ipaq_micro_battery.c | 290 +++++++++++++++++++++++++++++++++++++
- 3 files changed, 298 insertions(+)
- create mode 100644 drivers/power/ipaq_micro_battery.c
-
-diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
-index ba6975123071..73cfcdf28a36 100644
---- a/drivers/power/Kconfig
-+++ b/drivers/power/Kconfig
-@@ -137,6 +137,13 @@ config BATTERY_COLLIE
- Say Y to enable support for the battery on the Sharp Zaurus
- SL-5500 (collie) models.
-
-+config BATTERY_IPAQ_MICRO
-+ tristate "iPAQ Atmel Micro ASIC battery driver"
-+ depends on MFD_IPAQ_MICRO
-+ help
-+ Choose this option if you want to monitor battery status on
-+ Compaq/HP iPAQ h3100 and h3600.
-+
- config BATTERY_WM97XX
- bool "WM97xx generic battery driver"
- depends on TOUCHSCREEN_WM97XX=y
-diff --git a/drivers/power/Makefile b/drivers/power/Makefile
-index ee54a3e4c90a..dfa894273926 100644
---- a/drivers/power/Makefile
-+++ b/drivers/power/Makefile
-@@ -25,6 +25,7 @@ obj-$(CONFIG_BATTERY_PMU) += pmu_battery.o
- obj-$(CONFIG_BATTERY_OLPC) += olpc_battery.o
- obj-$(CONFIG_BATTERY_TOSA) += tosa_battery.o
- obj-$(CONFIG_BATTERY_COLLIE) += collie_battery.o
-+obj-$(CONFIG_BATTERY_IPAQ_MICRO) += ipaq_micro_battery.o
- obj-$(CONFIG_BATTERY_WM97XX) += wm97xx_battery.o
- obj-$(CONFIG_BATTERY_SBS) += sbs-battery.o
- obj-$(CONFIG_BATTERY_BQ27x00) += bq27x00_battery.o
-diff --git a/drivers/power/ipaq_micro_battery.c b/drivers/power/ipaq_micro_battery.c
-new file mode 100644
-index 000000000000..f875137e4d9c
---- /dev/null
-+++ b/drivers/power/ipaq_micro_battery.c
-@@ -0,0 +1,290 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * h3xxx atmel micro companion support, battery subdevice
-+ * based on previous kernel 2.4 version
-+ * Author : Alessandro Gardich <gremlin at gremlin.it>
-+ * Author : Linus Walleij <linus.walleij at linaro.org>
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/mfd/ipaq-micro.h>
-+#include <linux/power_supply.h>
-+#include <linux/workqueue.h>
-+
-+#define BATT_PERIOD 100000 /* 10 seconds in milliseconds */
-+
-+#define MICRO_BATT_CHEM_ALKALINE 0x01
-+#define MICRO_BATT_CHEM_NICD 0x02
-+#define MICRO_BATT_CHEM_NIMH 0x03
-+#define MICRO_BATT_CHEM_LION 0x04
-+#define MICRO_BATT_CHEM_LIPOLY 0x05
-+#define MICRO_BATT_CHEM_NOT_INSTALLED 0x06
-+#define MICRO_BATT_CHEM_UNKNOWN 0xff
-+
-+#define MICRO_BATT_STATUS_HIGH 0x01
-+#define MICRO_BATT_STATUS_LOW 0x02
-+#define MICRO_BATT_STATUS_CRITICAL 0x04
-+#define MICRO_BATT_STATUS_CHARGING 0x08
-+#define MICRO_BATT_STATUS_CHARGEMAIN 0x10
-+#define MICRO_BATT_STATUS_DEAD 0x20 /* Battery will not charge */
-+#define MICRO_BATT_STATUS_NOTINSTALLED 0x20 /* For expansion pack batteries */
-+#define MICRO_BATT_STATUS_FULL 0x40 /* Battery fully charged */
-+#define MICRO_BATT_STATUS_NOBATTERY 0x80
-+#define MICRO_BATT_STATUS_UNKNOWN 0xff
-+
-+struct micro_battery {
-+ struct ipaq_micro *micro;
-+ struct workqueue_struct *wq;
-+ struct delayed_work update;
-+ u8 ac;
-+ u8 chemistry;
-+ unsigned int voltage;
-+ u16 temperature;
-+ u8 flag;
-+};
-+
-+static void micro_battery_work(struct work_struct *work)
-+{
-+ struct micro_battery *mb = container_of(work,
-+ struct micro_battery, update.work);
-+ struct ipaq_micro_msg msg_battery = {
-+ .id = MSG_BATTERY,
-+ };
-+ struct ipaq_micro_msg msg_sensor = {
-+ .id = MSG_THERMAL_SENSOR,
-+ };
-+
-+ /* First send battery message */
-+ ipaq_micro_tx_msg_sync(mb->micro, &msg_battery);
-+ if (msg_battery.rx_len < 4)
-+ pr_info("ERROR");
-+
-+ /*
-+ * Returned message format:
-+ * byte 0: 0x00 = Not plugged in
-+ * 0x01 = AC adapter plugged in
-+ * byte 1: chemistry
-+ * byte 2: voltage LSB
-+ * byte 3: voltage MSB
-+ * byte 4: flags
-+ * byte 5-9: same for battery 2
-+ */
-+ mb->ac = msg_battery.rx_data[0];
-+ mb->chemistry = msg_battery.rx_data[1];
-+ mb->voltage = ((((unsigned short)msg_battery.rx_data[3] << 8) +
-+ msg_battery.rx_data[2]) * 5000L) * 1000 / 1024;
-+ mb->flag = msg_battery.rx_data[4];
-+
-+ if (msg_battery.rx_len == 9)
-+ pr_debug("second battery ignored\n");
-+
-+ /* Then read the sensor */
-+ ipaq_micro_tx_msg_sync(mb->micro, &msg_sensor);
-+ mb->temperature = msg_sensor.rx_data[1] << 8 | msg_sensor.rx_data[0];
-+
-+ queue_delayed_work(mb->wq, &mb->update, msecs_to_jiffies(BATT_PERIOD));
-+}
-+
-+static int get_capacity(struct power_supply *b)
-+{
-+ struct micro_battery *mb = dev_get_drvdata(b->dev->parent);
-+
-+ switch (mb->flag & 0x07) {
-+ case MICRO_BATT_STATUS_HIGH:
-+ return 100;
-+ break;
-+ case MICRO_BATT_STATUS_LOW:
-+ return 50;
-+ break;
-+ case MICRO_BATT_STATUS_CRITICAL:
-+ return 5;
-+ break;
-+ default:
-+ break;
-+ }
-+ return 0;
-+}
-+
-+static int get_status(struct power_supply *b)
-+{
-+ struct micro_battery *mb = dev_get_drvdata(b->dev->parent);
-+
-+ if (mb->flag == MICRO_BATT_STATUS_UNKNOWN)
-+ return POWER_SUPPLY_STATUS_UNKNOWN;
-+
-+ if (mb->flag & MICRO_BATT_STATUS_FULL)
-+ return POWER_SUPPLY_STATUS_FULL;
-+
-+ if ((mb->flag & MICRO_BATT_STATUS_CHARGING) ||
-+ (mb->flag & MICRO_BATT_STATUS_CHARGEMAIN))
-+ return POWER_SUPPLY_STATUS_CHARGING;
-+
-+ return POWER_SUPPLY_STATUS_DISCHARGING;
-+}
-+
-+static int micro_batt_get_property(struct power_supply *b,
-+ enum power_supply_property psp,
-+ union power_supply_propval *val)
-+{
-+ struct micro_battery *mb = dev_get_drvdata(b->dev->parent);
-+
-+ switch (psp) {
-+ case POWER_SUPPLY_PROP_TECHNOLOGY:
-+ switch (mb->chemistry) {
-+ case MICRO_BATT_CHEM_NICD:
-+ val->intval = POWER_SUPPLY_TECHNOLOGY_NiCd;
-+ break;
-+ case MICRO_BATT_CHEM_NIMH:
-+ val->intval = POWER_SUPPLY_TECHNOLOGY_NiMH;
-+ break;
-+ case MICRO_BATT_CHEM_LION:
-+ val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
-+ break;
-+ case MICRO_BATT_CHEM_LIPOLY:
-+ val->intval = POWER_SUPPLY_TECHNOLOGY_LIPO;
-+ break;
-+ default:
-+ val->intval = POWER_SUPPLY_TECHNOLOGY_UNKNOWN;
-+ break;
-+ };
-+ break;
-+ case POWER_SUPPLY_PROP_STATUS:
-+ val->intval = get_status(b);
-+ break;
-+ case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
-+ val->intval = 4700000;
-+ break;
-+ case POWER_SUPPLY_PROP_CAPACITY:
-+ val->intval = get_capacity(b);
-+ break;
-+ case POWER_SUPPLY_PROP_TEMP:
-+ val->intval = mb->temperature;
-+ break;
-+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
-+ val->intval = mb->voltage;
-+ break;
-+ default:
-+ return -EINVAL;
-+ };
-+
-+ return 0;
-+}
-+
-+static int micro_ac_get_property(struct power_supply *b,
-+ enum power_supply_property psp,
-+ union power_supply_propval *val)
-+{
-+ struct micro_battery *mb = dev_get_drvdata(b->dev->parent);
-+
-+ switch (psp) {
-+ case POWER_SUPPLY_PROP_ONLINE:
-+ val->intval = mb->ac;
-+ break;
-+ default:
-+ return -EINVAL;
-+ };
-+
-+ return 0;
-+}
-+
-+static enum power_supply_property micro_batt_props[] = {
-+ POWER_SUPPLY_PROP_TECHNOLOGY,
-+ POWER_SUPPLY_PROP_STATUS,
-+ POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
-+ POWER_SUPPLY_PROP_CAPACITY,
-+ POWER_SUPPLY_PROP_TEMP,
-+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
-+};
-+
-+static struct power_supply micro_battery = {
-+ .name = "main-battery",
-+ .type = POWER_SUPPLY_TYPE_BATTERY,
-+ .properties = micro_batt_props,
-+ .num_properties = ARRAY_SIZE(micro_batt_props),
-+ .get_property = micro_batt_get_property,
-+ .use_for_apm = 1,
-+};
-+
-+static enum power_supply_property micro_ac_props[] = {
-+ POWER_SUPPLY_PROP_ONLINE,
-+};
-+
-+static struct power_supply micro_ac = {
-+ .name = "ac",
-+ .type = POWER_SUPPLY_TYPE_MAINS,
-+ .properties = micro_ac_props,
-+ .num_properties = ARRAY_SIZE(micro_ac_props),
-+ .get_property = micro_ac_get_property,
-+};
-+
-+static int micro_batt_probe(struct platform_device *pdev)
-+{
-+ struct micro_battery *mb;
-+
-+ mb = devm_kzalloc(&pdev->dev, sizeof(*mb), GFP_KERNEL);
-+ if (!mb)
-+ return -ENOMEM;
-+
-+ mb->micro = dev_get_drvdata(pdev->dev.parent);
-+ mb->wq = create_singlethread_workqueue("ipaq-battery-wq");
-+ INIT_DELAYED_WORK(&mb->update, micro_battery_work);
-+ platform_set_drvdata(pdev, mb);
-+ queue_delayed_work(mb->wq, &mb->update, 1);
-+ power_supply_register(&pdev->dev, µ_battery);
-+ power_supply_register(&pdev->dev, µ_ac);
-+
-+ dev_info(&pdev->dev, "iPAQ micro battery driver\n");
-+ return 0;
-+}
-+
-+static int micro_batt_remove(struct platform_device *pdev)
-+
-+{
-+ struct micro_battery *mb = platform_get_drvdata(pdev);
-+
-+ power_supply_unregister(µ_ac);
-+ power_supply_unregister(µ_battery);
-+ cancel_delayed_work_sync(&mb->update);
-+
-+ return 0;
-+}
-+
-+static int micro_batt_suspend(struct device *dev)
-+{
-+ struct micro_battery *mb = dev_get_drvdata(dev);
-+
-+ cancel_delayed_work_sync(&mb->update);
-+ return 0;
-+}
-+
-+static int micro_batt_resume(struct device *dev)
-+{
-+ struct micro_battery *mb = dev_get_drvdata(dev);
-+
-+ queue_delayed_work(mb->wq, &mb->update, msecs_to_jiffies(BATT_PERIOD));
-+ return 0;
-+}
-+
-+static const struct dev_pm_ops micro_batt_dev_pm_ops = {
-+ SET_SYSTEM_SLEEP_PM_OPS(micro_batt_suspend, micro_batt_resume)
-+};
-+
-+struct platform_driver micro_batt_device_driver = {
-+ .driver = {
-+ .name = "ipaq-micro-battery",
-+ .pm = µ_batt_dev_pm_ops,
-+ },
-+ .probe = micro_batt_probe,
-+ .remove = micro_batt_remove,
-+};
-+module_platform_driver(micro_batt_device_driver);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_DESCRIPTION("driver for iPAQ Atmel micro battery");
-+MODULE_ALIAS("platform:battery-ipaq-micro");
---
-1.9.0
-
diff --git a/recipes-kernel/linux/linux-yocto-dev/h3600/defconfig b/recipes-kernel/linux/linux-yocto-dev/h3600/defconfig
deleted file mode 100644
index 0796878..0000000
--- a/recipes-kernel/linux/linux-yocto-dev/h3600/defconfig
+++ /dev/null
@@ -1,94 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-# CONFIG_LBDAF is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_SA1100=y
-CONFIG_SA1100_H3600=y
-CONFIG_PCCARD=y
-CONFIG_PCMCIA_SA1100=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-# CONFIG_CPU_FREQ_STAT is not set
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_IPV6 is not set
-CONFIG_IRDA=y
-CONFIG_IRLAN=m
-CONFIG_IRNET=m
-CONFIG_IRCOMM=m
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_MTD=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_CFI_I1 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_SA1100=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECS=y
-CONFIG_NETDEVICES=y
-CONFIG_PCMCIA_PCNET=y
-CONFIG_PPP=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_ASYNC=m
-# CONFIG_WLAN is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_IPAQ_MICRO=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_IPAQ_MICRO=y
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_SA1100=y
-CONFIG_SERIAL_SA1100_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_POWER_SUPPLY=y
-CONFIG_BATTERY_IPAQ_MICRO=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_SA1100=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_USB_SUPPORT is not set
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_IPAQ_MICRO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_DMADEVICES=y
-CONFIG_DMA_SA11X0=y
-CONFIG_DMATEST=y
-CONFIG_EXT2_FS=y
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_LZO=y
-CONFIG_CRAMFS=m
-CONFIG_NFS_FS=y
-CONFIG_NFSD=m
-CONFIG_NLS=y
-CONFIG_DEBUG_FS=y
diff --git a/recipes-kernel/linux/linux-yocto-dev/patches/patches-locomo/locomo-fix-SCL-SDA.patch b/recipes-kernel/linux/linux-yocto-dev/patches/patches-locomo/locomo-fix-SCL-SDA.patch
deleted file mode 100644
index fbf3edd..0000000
--- a/recipes-kernel/linux/linux-yocto-dev/patches/patches-locomo/locomo-fix-SCL-SDA.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From acc2f94781ab11bead994bb3faaad149f9187bd4 Mon Sep 17 00:00:00 2001
-From: Andrea Adami <andrea.adami at gmail.com>
-Date: Tue, 12 Nov 2013 22:21:20 +0100
-Subject: [PATCH] linux-yocto: collie: locomo.c: fix SCL line instead
- of SDA
-
-Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov at gmail.com>
-Signed-off-by: Andrea Adami <andrea.adami at gmail.com>
----
- arch/arm/common/locomo.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c
-index b55c362..d827bcb 100644
---- a/arch/arm/common/locomo.c
-+++ b/arch/arm/common/locomo.c
-@@ -629,7 +629,7 @@ static void locomo_m62332_sendbit(void *mapbase, int bit)
- unsigned int r;
-
- r = locomo_readl(mapbase + LOCOMO_DAC);
-- r &= ~(LOCOMO_DAC_SCLOEB);
-+ r &= ~(LOCOMO_DAC_SDAOEB);
- locomo_writel(r, mapbase + LOCOMO_DAC);
- udelay(DAC_LOW_SETUP_TIME); /* 300 nsec */
- udelay(DAC_DATA_HOLD_TIME); /* 300 nsec */
---
-1.8.1.5
-
diff --git a/recipes-kernel/linux/linux-yocto-dev/patches/patches-locomo/locomolcd-suspend-resume.patch b/recipes-kernel/linux/linux-yocto-dev/patches/patches-locomo/locomolcd-suspend-resume.patch
deleted file mode 100644
index a3d63e0..0000000
--- a/recipes-kernel/linux/linux-yocto-dev/patches/patches-locomo/locomolcd-suspend-resume.patch
+++ /dev/null
@@ -1,92 +0,0 @@
-From ec4ff55857d5f48d2bf08e46f12eb4670ec6aa1a Mon Sep 17 00:00:00 2001
-From: Dmitry Eremin-Solenikov <dbaryshkov at gmail.com>
-Date: Thu, 14 Nov 2013 17:18:26 +0400
-Subject: [PATCH] backlight: locomolcd: fix suspend/resume
-
-Replace cooked suspend/resume with support from core backlight layer.
-This allows us to remove suspend/resume callbacks from locomolcd
-completely. They were not working anyway, as locomo does not support
-pm_ops handling.
-
-Signed-off-by: Dmitry Eremin-Solenikov <dmitry_eremin at mentor.com>
----
- drivers/video/backlight/locomolcd.c | 26 +++-----------------------
- 1 file changed, 3 insertions(+), 23 deletions(-)
-
-diff --git a/drivers/video/backlight/locomolcd.c b/drivers/video/backlight/locomolcd.c
-index 6c3ec42..54d2da9 100644
---- a/drivers/video/backlight/locomolcd.c
-+++ b/drivers/video/backlight/locomolcd.c
-@@ -28,8 +28,6 @@
-
- static struct backlight_device *locomolcd_bl_device;
- static struct locomo_dev *locomolcd_dev;
--static unsigned long locomolcd_flags;
--#define LOCOMOLCD_SUSPENDED 0x01
-
- static void locomolcd_on(int comadj)
- {
-@@ -117,7 +115,7 @@ static int locomolcd_set_intensity(struct backlight_device *bd)
- intensity = 0;
- if (bd->props.fb_blank != FB_BLANK_UNBLANK)
- intensity = 0;
-- if (locomolcd_flags & LOCOMOLCD_SUSPENDED)
-+ if (bd->props.state & BL_CORE_SUSPENDED)
- intensity = 0;
-
- switch (intensity) {
-@@ -155,26 +153,9 @@ static int locomolcd_get_intensity(struct backlight_device *bd)
- static const struct backlight_ops locomobl_data = {
- .get_brightness = locomolcd_get_intensity,
- .update_status = locomolcd_set_intensity,
-+ .options = BL_CORE_SUSPENDRESUME,
- };
-
--#ifdef CONFIG_PM_SLEEP
--static int locomolcd_suspend(struct device *dev)
--{
-- locomolcd_flags |= LOCOMOLCD_SUSPENDED;
-- locomolcd_set_intensity(locomolcd_bl_device);
-- return 0;
--}
--
--static int locomolcd_resume(struct device *dev)
--{
-- locomolcd_flags &= ~LOCOMOLCD_SUSPENDED;
-- locomolcd_set_intensity(locomolcd_bl_device);
-- return 0;
--}
--#endif
--
--static SIMPLE_DEV_PM_OPS(locomolcd_pm_ops, locomolcd_suspend, locomolcd_resume);
--
- static int locomolcd_probe(struct locomo_dev *ldev)
- {
- struct backlight_properties props;
-@@ -198,6 +179,7 @@ static int locomolcd_probe(struct locomo_dev *ldev)
- memset(&props, 0, sizeof(struct backlight_properties));
- props.type = BACKLIGHT_RAW;
- props.max_brightness = 4;
-+ props.brightness = 2;
- locomolcd_bl_device = backlight_device_register("locomo-bl",
- &ldev->dev, NULL,
- &locomobl_data, &props);
-@@ -206,7 +188,6 @@ static int locomolcd_probe(struct locomo_dev *ldev)
- return PTR_ERR(locomolcd_bl_device);
-
- /* Set up frontlight so that screen is readable */
-- locomolcd_bl_device->props.brightness = 2;
- locomolcd_set_intensity(locomolcd_bl_device);
-
- return 0;
-@@ -230,7 +211,6 @@ static int locomolcd_remove(struct locomo_dev *dev)
- static struct locomo_driver poodle_lcd_driver = {
- .drv = {
- .name = "locomo-backlight",
-- .pm = &locomolcd_pm_ops,
- },
- .devid = LOCOMO_DEVID_BACKLIGHT,
- .probe = locomolcd_probe,
---
-1.8.4.2
-
diff --git a/recipes-kernel/linux/linux-yocto-dev/patches/patches-locomokbd/locomo_kbd_tweak-r2.patch b/recipes-kernel/linux/linux-yocto-dev/patches/patches-locomokbd/locomo_kbd_tweak-r2.patch
deleted file mode 100644
index 441e3dc..0000000
--- a/recipes-kernel/linux/linux-yocto-dev/patches/patches-locomokbd/locomo_kbd_tweak-r2.patch
+++ /dev/null
@@ -1,84 +0,0 @@
-From c9a909cedb442a1a3d020f0c10683298dcc2246c Mon Sep 17 00:00:00 2001
-From: Andrea Adami <andrea.adami at gmail.com>
-Date: Sat, 21 Apr 2012 23:48:57 +0200
-Subject: [PATCH] locomokbd: apply tweaks for Zaurus
-
-from http://www.rpsys.net/openzaurus/patches/
-
-Signed-off-by: Richard Purdie <rpurdie at rpsys.net>
-Signed-off-by: Andrea Adami <andrea.adami at gmail.com>
-
-Upstream-Status: Inappropriate [embedded specific]
-[Patch needed for initramfs w/out keymaps like kexecboot]
----
- drivers/input/keyboard/locomokbd.c | 44 ++++++++++++++++++++++----------------
- 1 file changed, 25 insertions(+), 19 deletions(-)
-
-diff --git a/drivers/input/keyboard/locomokbd.c b/drivers/input/keyboard/locomokbd.c
-index c94d610..2b978c8 100644
---- a/drivers/input/keyboard/locomokbd.c
-+++ b/drivers/input/keyboard/locomokbd.c
-@@ -39,27 +39,33 @@ MODULE_AUTHOR("John Lenz <lenz at cs.wisc.edu>");
- MODULE_DESCRIPTION("LoCoMo keyboard driver");
- MODULE_LICENSE("GPL");
-
--#define LOCOMOKBD_NUMKEYS 128
--
--#define KEY_ACTIVITY KEY_F16
--#define KEY_CONTACT KEY_F18
--#define KEY_CENTER KEY_F15
-+#define LOCOMOKBD_NUMKEYS 128
-+
-+#define LOCOMO_KEY_CALENDER KEY_LEFTCTRL
-+#define LOCOMO_KEY_ADDRESS KEY_LEFTALT /* Needed for SysRQ */
-+#define LOCOMO_KEY_HOME KEY_SYSRQ /* Needed for SysRQ */
-+#define LOCOMO_KEY_MENU KEY_F12
-+#define LOCOMO_KEY_MAIL KEY_F10
-+#define LOCOMO_KEY_OK KEY_F11 /* Don't hardwire to KEY_RETURN */
-+#define LOCOMO_KEY_CANCEL KEY_POWER
-+#define LOCOMO_KEY_CENTER KEY_F5 /* Don't hardwire to KEY_RETURN */
-+#define LOCOMO_KEY_FN KEY_F9
-
- static const unsigned char
- locomokbd_keycode[LOCOMOKBD_NUMKEYS] = {
-- 0, KEY_ESC, KEY_ACTIVITY, 0, 0, 0, 0, 0, 0, 0, /* 0 - 9 */
-- 0, 0, 0, 0, 0, 0, 0, KEY_MENU, KEY_HOME, KEY_CONTACT, /* 10 - 19 */
-- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 20 - 29 */
-- 0, 0, 0, KEY_CENTER, 0, KEY_MAIL, 0, 0, 0, 0, /* 30 - 39 */
-- 0, 0, 0, 0, 0, 0, 0, 0, 0, KEY_RIGHT, /* 40 - 49 */
-- KEY_UP, KEY_LEFT, 0, 0, KEY_P, 0, KEY_O, KEY_I, KEY_Y, KEY_T, /* 50 - 59 */
-- KEY_E, KEY_W, 0, 0, 0, 0, KEY_DOWN, KEY_ENTER, 0, 0, /* 60 - 69 */
-- KEY_BACKSPACE, 0, KEY_L, KEY_U, KEY_H, KEY_R, KEY_D, KEY_Q, 0, 0, /* 70 - 79 */
-- 0, 0, 0, 0, 0, 0, KEY_ENTER, KEY_RIGHTSHIFT, KEY_K, KEY_J, /* 80 - 89 */
-- KEY_G, KEY_F, KEY_X, KEY_S, 0, 0, 0, 0, 0, 0, /* 90 - 99 */
-- 0, 0, KEY_DOT, 0, KEY_COMMA, KEY_N, KEY_B, KEY_C, KEY_Z, KEY_A, /* 100 - 109 */
-- KEY_LEFTSHIFT, KEY_TAB, KEY_LEFTCTRL, 0, 0, 0, 0, 0, 0, 0, /* 110 - 119 */
-- KEY_M, KEY_SPACE, KEY_V, KEY_APOSTROPHE, KEY_SLASH, 0, 0, 0 /* 120 - 128 */
-+ 0, LOCOMO_KEY_CANCEL, LOCOMO_KEY_CALENDER, LOCOMO_KEY_HOME, 0, 0, 0, 0, 0, 0, /* 0 - 9 */
-+ 0, 0, 0, 0, 0, 0, 0, LOCOMO_KEY_MENU, 0, LOCOMO_KEY_ADDRESS, /* 10 - 19 */
-+ 0, 0, 0, 0, 0, LOCOMO_KEY_MAIL, 0, 0, 0, 0, /* 20 - 29 */
-+ 0, 0, 0, LOCOMO_KEY_CENTER, 0, LOCOMO_KEY_MAIL, 0, 0, 0, 0, /* 30 - 39 */
-+ 0, 0, 0, 0, 0, 0, 0, 0, 0, KEY_RIGHT, /* 40 - 49 */
-+ KEY_UP, KEY_LEFT, 0, 0, KEY_P, 0, KEY_O, KEY_I, KEY_Y, KEY_T, /* 50 - 59 */
-+ KEY_E, KEY_W, 0, 0, 0, 0, KEY_DOWN, LOCOMO_KEY_OK, 0, 0, /* 60 - 69 */
-+ KEY_BACKSPACE, 0, KEY_L, KEY_U, KEY_H, KEY_R, KEY_D, KEY_Q, 0, 0, /* 70 - 79 */
-+ 0, 0, 0, 0, 0, 0, KEY_ENTER, KEY_RIGHTSHIFT, KEY_K, KEY_J, /* 80 - 89 */
-+ KEY_G, KEY_F, KEY_X, KEY_S, 0, 0, 0, 0, 0, 0, /* 90 - 99 */
-+ 0, 0, KEY_DOT, 0, KEY_COMMA, KEY_N, KEY_B, KEY_C, KEY_Z, KEY_A, /* 100 - 109 */
-+ KEY_LEFTSHIFT, KEY_TAB, LOCOMO_KEY_FN, 0, 0, 0, 0, 0, 0, 0, /* 110 - 119 */
-+ KEY_M, KEY_SPACE, KEY_V, KEY_APOSTROPHE, KEY_SLASH, 0, 0, 0 /* 120 - 128 */
- };
-
- #define KB_ROWS 16
-@@ -68,7 +74,7 @@ locomokbd_keycode[LOCOMOKBD_NUMKEYS] = {
- #define SCANCODE(c,r) ( ((c)<<4) + (r) + 1 )
-
- #define KB_DELAY 8
--#define SCAN_INTERVAL (HZ/10)
-+#define SCAN_INTERVAL (HZ/20)
-
- struct locomokbd {
- unsigned char keycode[LOCOMOKBD_NUMKEYS];
---
-1.8.1.5
-
diff --git a/recipes-kernel/linux/linux-yocto-dev/patches/patches-mtd/collie-LH28F640BF.patch b/recipes-kernel/linux/linux-yocto-dev/patches/patches-mtd/collie-LH28F640BF.patch
deleted file mode 100644
index fca51d5..0000000
--- a/recipes-kernel/linux/linux-yocto-dev/patches/patches-mtd/collie-LH28F640BF.patch
+++ /dev/null
@@ -1,137 +0,0 @@
-From 12402bf48cf2494a65aac0cf1e55cdc6296691bc Mon Sep 17 00:00:00 2001
-From: Andrea Adami <andrea.adami at gmail.com>
-Date: Sun, 6 Apr 2014 21:21:22 +0200
-Subject: [PATCH] mtd: add support for Sharp LH28F640BF NOR chips
-
-Tested on Zaurus SL-5500 (Collie) 2x16 on 32 bit bus
-
-Buffer write fixes as seen in 2007 patch c/o
-Anti Sullin <anti.sullin <at> artecdesign.ee>
-http://comments.gmane.org/gmane.linux.ports.arm.kernel/36733
-
-Other fixes as seen in
-Micron: TN-12-06: Adapting the Linux Kernel for P30, P33, and J3 Flash
-
-Signed-off-by: Andrea Adami <andrea.adami at gmail.com>
----
- drivers/mtd/chips/cfi_cmdset_0001.c | 60 ++++++++++++++++++++++++++++++++++++-
- 1 file changed, 59 insertions(+), 1 deletion(-)
-
-diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
-index 7751443..d83b603 100644
---- a/drivers/mtd/chips/cfi_cmdset_0001.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
-@@ -53,6 +53,11 @@
- /* Atmel chips */
- #define AT49BV640D 0x02de
- #define AT49BV640DT 0x02db
-+/* Sharp chips */
-+#define LH28F640BFHE_PTTL90 0x00b0
-+#define LH28F640BFHE_PBTL90 0x00b1
-+#define LH28F640BFHE_PTTL70A 0x00b2
-+#define LH28F640BFHE_PBTL70A 0x00b3
-
- static int cfi_intelext_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
- static int cfi_intelext_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-@@ -259,6 +264,40 @@ static void fixup_st_m28w320cb(struct mtd_info *mtd)
- (cfi->cfiq->EraseRegionInfo[1] & 0xffff0000) | 0x3e;
- };
-
-+static int is_LH28F640BF(struct cfi_private *cfi)
-+{
-+ /* Sharp LH28F640BF Family */
-+ if (cfi->mfr == CFI_MFR_SHARP && (
-+ cfi->id == LH28F640BFHE_PTTL90 || cfi->id == LH28F640BFHE_PBTL90 ||
-+ cfi->id == LH28F640BFHE_PTTL70A || cfi->id == LH28F640BFHE_PBTL70A))
-+ return 1;
-+ return 0;
-+}
-+
-+static void fixup_LH28F640BF(struct mtd_info *mtd)
-+{
-+ struct map_info *map = mtd->priv;
-+ struct cfi_private *cfi = map->fldrv_priv;
-+ struct cfi_pri_intelext *extp = cfi->cmdset_priv;
-+
-+ /* NOTE: Sharp Extended Query reports the nr of hardware partitions
-+ * with an offset of +3. Change of the PCR are not reflected.
-+ * Keep the wrong reading (0) and let the code convert it to 1 */
-+
-+ /* Reset the Partition Configuration Register on LH28F640BF
-+ * to a single partition (PCRC = 0x000): PCRC is embedded into A0-A15. */
-+ if (is_LH28F640BF(cfi)) {
-+ printk(KERN_INFO "Reset Partition Config. Register: 1 Partition of 4 planes\n" );
-+ map_write(map, CMD(0x60), 0);
-+ map_write(map, CMD(0x04), 0);
-+
-+ /* We have set one single partition thus
-+ * Simultaneous Operations are not allowed */
-+ printk(KERN_WARNING "cfi_cmdset_0001: Simultaneous Operations disabled\n");
-+ extp->FeatureSupport &= ~512;
-+ }
-+}
-+
- static void fixup_use_point(struct mtd_info *mtd)
- {
- struct map_info *map = mtd->priv;
-@@ -310,6 +349,8 @@ static struct cfi_fixup cfi_fixup_table[] = {
- { CFI_MFR_ST, 0x00ba, /* M28W320CT */ fixup_st_m28w320ct },
- { CFI_MFR_ST, 0x00bb, /* M28W320CB */ fixup_st_m28w320cb },
- { CFI_MFR_INTEL, CFI_ID_ANY, fixup_unlock_powerup_lock },
-+ { CFI_MFR_SHARP, CFI_ID_ANY, fixup_unlock_powerup_lock },
-+ { CFI_MFR_SHARP, CFI_ID_ANY, fixup_LH28F640BF },
- { 0, 0, NULL }
- };
-
-@@ -655,7 +696,6 @@ static int cfi_intelext_partition_fixup(struct mtd_info *mtd,
-
- /* Burst Read info */
- offs += extp->extra[offs+1]+2;
--
- /* Number of partition regions */
- numregions = extp->extra[offs];
- offs += 1;
-@@ -1003,8 +1043,16 @@ static void put_chip(struct map_info *map, struct flchip *chip, unsigned long ad
- sending the 0x70 (Read Status) command to an erasing
- chip and expecting it to be ignored, that's what we
- do. */
-+
-+ /* Fix Erase-Suspend hangups: dummy 0xFF cycle before Resume */
-+ if (is_LH28F640BF(cfi)) map_write(map, CMD(0xFF), adr);
-+
- map_write(map, CMD(0xd0), adr);
- map_write(map, CMD(0x70), adr);
-+
-+ /* Fix Erase-Suspend following Erase-Resume: add latency */
-+ if (is_LH28F640BF(cfi)) cfi_udelay(1200);
-+
- chip->oldstate = FL_READY;
- chip->state = FL_ERASING;
- break;
-@@ -1162,6 +1210,10 @@ static int __xipram xip_wait_for_operation(
- local_irq_disable();
-
- /* Resume the write or erase operation */
-+
-+ /* Fix Erase-Suspend hangups: dummy 0xFF cycle before Resume */
-+ if (is_LH28F640BF(cfi)) map_write(map, CMD(0xFF), adr);
-+
- map_write(map, CMD(0xd0), adr);
- map_write(map, CMD(0x70), adr);
- chip->state = oldstate;
-@@ -1654,6 +1706,12 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
- initial_adr = adr;
- cmd_adr = adr & ~(wbufsize-1);
-
-+ /* Sharp LH28F640BF chips need the first address for the
-+ * Page Buffer Program command. See Table 5 of
-+ * LH28F320BF, LH28F640BF, LH28F128BF Series (Appendix FUM00701)
-+ * Apparently some Intel Strataflash can be programmed this way as well */
-+ if (is_LH28F640BF(cfi)) cmd_adr = adr;
-+
- /* Let's determine this according to the interleave only once */
- write_cmd = (cfi->cfiq->P_ID != P_ID_INTEL_PERFORMANCE) ? CMD(0xe8) : CMD(0xe9);
-
---
-1.8.1.5
-
diff --git a/recipes-kernel/linux/linux-yocto-dev/patches/patches-mtd/collie-cfi-probe-again.patch b/recipes-kernel/linux/linux-yocto-dev/patches/patches-mtd/collie-cfi-probe-again.patch
deleted file mode 100644
index 3054106..0000000
--- a/recipes-kernel/linux/linux-yocto-dev/patches/patches-mtd/collie-cfi-probe-again.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From 35957eda21bdd2f22c84fa269c1b856f5039c308 Mon Sep 17 00:00:00 2001
-From: Andrea Adami <andrea.adami at gmail.com>
-Date: Tue, 12 Nov 2013 22:32:26 +0100
-Subject: [PATCH] sa1100: collie: detect NOR again with cfi_probe
-
-Ehile the detection is still forced we switch away from jedec:
-the CFI code allows us to set the necessary fixups.
-
-Signed-off-by: Andrea Adami <andrea.adami at gmail.com>
----
- arch/arm/mach-sa1100/collie.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
-index 799902d..8c088cc 100644
---- a/arch/arm/mach-sa1100/collie.c
-+++ b/arch/arm/mach-sa1100/collie.c
-@@ -326,7 +326,7 @@ static void collie_flash_exit(void)
- }
-
- static struct flash_platform_data collie_flash_data = {
-- .map_name = "jedec_probe",
-+ .map_name = "cfi_probe",
- .init = collie_flash_init,
- .set_vpp = collie_set_vpp,
- .exit = collie_flash_exit,
---
-1.8.1.5
-
diff --git a/recipes-kernel/linux/linux-yocto-dev/patches/patches-mtd/collie-match-cfi-qry.patch b/recipes-kernel/linux/linux-yocto-dev/patches/patches-mtd/collie-match-cfi-qry.patch
deleted file mode 100644
index a315d93..0000000
--- a/recipes-kernel/linux/linux-yocto-dev/patches/patches-mtd/collie-match-cfi-qry.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From 66ec11df6561d5ba7cdf41977af828a53ba6b99f Mon Sep 17 00:00:00 2001
-From: Andrea Adami <andrea.adami at gmail.com>
-Date: Sat, 1 Feb 2014 13:17:24 +0100
-Subject: [PATCH] mtd: cfi_util.c: force CFI detection of 2x LH28F640BF
-
-Signed-off-by: Andrea Adami <andrea.adami at gmail.com>
----
- drivers/mtd/chips/cfi_util.c | 16 ++++++++++++++++
- 1 file changed, 16 insertions(+)
-
-diff --git a/drivers/mtd/chips/cfi_util.c b/drivers/mtd/chips/cfi_util.c
-index f992418..2c7a13d 100644
---- a/drivers/mtd/chips/cfi_util.c
-+++ b/drivers/mtd/chips/cfi_util.c
-@@ -29,6 +29,7 @@ int __xipram cfi_qry_present(struct map_info *map, __u32 base,
- int osf = cfi->interleave * cfi->device_type; /* scale factor */
- map_word val[3];
- map_word qry[3];
-+ unsigned long mask = (1 << (cfi->device_type * 8)) - 1;
-
- qry[0] = cfi_build_cmd('Q', map, cfi);
- qry[1] = cfi_build_cmd('R', map, cfi);
-@@ -38,6 +39,21 @@ int __xipram cfi_qry_present(struct map_info *map, __u32 base,
- val[1] = map_read(map, base + osf*0x11);
- val[2] = map_read(map, base + osf*0x12);
-
-+ /* Apparently only one of the 2 interleaved LH28F640BF 16 bit chips on
-+ * a 32 bit wide bus is answering to the CFI Query.
-+ * Using the expected map bankwidth=4 and chip interleave=2 we get wrong
-+ * readings like 0xffff0051 instead of 0x00510051 etc.
-+ * We take the valid bytes and recreate the expected answer as workaround.
-+ */
-+ if (((val[0].x[0] >> (cfi->device_type * 8)) == mask) &&
-+ ((val[1].x[0] >> (cfi->device_type * 8)) == mask) &&
-+ ((val[2].x[0] >> (cfi->device_type * 8)) == mask))
-+ {
-+ val[0].x[0] = (val[0].x[0] & mask) + ((val[0].x[0] & mask) << (cfi->device_type * 8));
-+ val[1].x[0] = (val[1].x[0] & mask) + ((val[1].x[0] & mask) << (cfi->device_type * 8));
-+ val[2].x[0] = (val[2].x[0] & mask) + ((val[2].x[0] & mask) << (cfi->device_type * 8));
-+ }
-+
- if (!map_word_equal(map, qry[0], val[0]))
- return 0;
-
---
-1.8.1.5
-
diff --git a/recipes-kernel/linux/linux-yocto-dev/patches/patches-mtd/collie-mtd-resize.patch b/recipes-kernel/linux/linux-yocto-dev/patches/patches-mtd/collie-mtd-resize.patch
deleted file mode 100644
index ba52d2f..0000000
--- a/recipes-kernel/linux/linux-yocto-dev/patches/patches-mtd/collie-mtd-resize.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From 85f5a57b9bdd94fa7a20280c31f4f8b148368215 Mon Sep 17 00:00:00 2001
-From: Andrea Adami <andrea.adami at gmail.com>
-Date: Thu, 7 Nov 2013 23:00:31 +0100
-Subject: ARM: SA1100: resize collie mtd to SZ_16M
-
-The end-user models have all 2x8 = 16 Megabytes of NOR.
-It seems that only some dev models/prototype had 32M.
-With current code, giving size of 32M can confuse the detection.
-
-JEDEC:
-sa1100-0: Found 2 x16 devices at 0x0 in 32-bit bank
-sa1100-0: Found different chip or no chip at all (mfr 0x4, id 0x3001) at 0x1000000
-SA1100 flash: CFI device at 0x00000000, 16MiB, 32-bit
-
-CFI:
-sa1100-0: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x0000b0 Chip ID 0x0000b0
-sa1100-0: Found 2 x16 devices at 0x1000000 in 32-bit bank
-Intel/Sharp Extended Query Table at 0x0039
-...
-sa1100-0: 2 set(s) of 2 interleaved chips --> 2 partitions of 16384 KiB
-SA1100 flash: CFI device at 0x00000000, 32MiB, 32-bit
-
-
-Signed-off-by: Andrea Adami <andrea.adami at gmail.com>
----
- arch/arm/mach-sa1100/collie.c | 2 +-
- 2 files changed, 230404 insertions(+), 1604 deletions(-)
-
-diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
-index 7fb96eb..c1005ef 100644
---- a/arch/arm/mach-sa1100/collie.c
-+++ b/arch/arm/mach-sa1100/collie.c
-@@ -298,7 +298,7 @@ static struct flash_platform_data collie_flash_data = {
- };
-
- static struct resource collie_flash_resources[] = {
-- DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M),
-+ DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_16M),
- };
-
- static struct sa1100fb_mach_info collie_lcd_info = {
diff --git a/recipes-kernel/linux/linux-yocto-dev/patches/patches-pxa/tosa-keys-mapping.patch b/recipes-kernel/linux/linux-yocto-dev/patches/patches-pxa/tosa-keys-mapping.patch
deleted file mode 100644
index b63754a..0000000
--- a/recipes-kernel/linux/linux-yocto-dev/patches/patches-pxa/tosa-keys-mapping.patch
+++ /dev/null
@@ -1,136 +0,0 @@
-From patchwork Sat Nov 16 12:47:50 2013
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [RESEND] arm: pxa: tosa: fix keys mapping
-From: Dmitry Eremin-Solenikov <dbaryshkov at gmail.com>
-X-Patchwork-Id: 3192431
-Message-Id: <20131116124750.GA26318 at anuminas.rup.mentorg.com>
-To: linux-arm-kernel at lists.infradead.org
-Cc: Russell King <linux at arm.linux.org.uk>, Eric Miao <eric.y.miao at gmail.com>,
- Haojian Zhuang <haojian.zhuang at gmail.com>
-Date: Sat, 16 Nov 2013 16:47:50 +0400
-
-When converting from tosa-keyboard driver to matrix keyboard, tosa keys
-received extra 1 column shift. Replace that with correct values to make
-keyboard work again.
-
-Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov at gmail.com>
-
----
-arch/arm/mach-pxa/tosa.c | 102 +++++++++++++++++++++++------------------------
- 1 file changed, 51 insertions(+), 51 deletions(-)
-
-diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
-index 0206b91..ef5557b 100644
---- a/arch/arm/mach-pxa/tosa.c
-+++ b/arch/arm/mach-pxa/tosa.c
-@@ -425,57 +425,57 @@ static struct platform_device tosa_power_device = {
- * Tosa Keyboard
- */
- static const uint32_t tosakbd_keymap[] = {
-- KEY(0, 2, KEY_W),
-- KEY(0, 6, KEY_K),
-- KEY(0, 7, KEY_BACKSPACE),
-- KEY(0, 8, KEY_P),
-- KEY(1, 1, KEY_Q),
-- KEY(1, 2, KEY_E),
-- KEY(1, 3, KEY_T),
-- KEY(1, 4, KEY_Y),
-- KEY(1, 6, KEY_O),
-- KEY(1, 7, KEY_I),
-- KEY(1, 8, KEY_COMMA),
-- KEY(2, 1, KEY_A),
-- KEY(2, 2, KEY_D),
-- KEY(2, 3, KEY_G),
-- KEY(2, 4, KEY_U),
-- KEY(2, 6, KEY_L),
-- KEY(2, 7, KEY_ENTER),
-- KEY(2, 8, KEY_DOT),
-- KEY(3, 1, KEY_Z),
-- KEY(3, 2, KEY_C),
-- KEY(3, 3, KEY_V),
-- KEY(3, 4, KEY_J),
-- KEY(3, 5, TOSA_KEY_ADDRESSBOOK),
-- KEY(3, 6, TOSA_KEY_CANCEL),
-- KEY(3, 7, TOSA_KEY_CENTER),
-- KEY(3, 8, TOSA_KEY_OK),
-- KEY(3, 9, KEY_LEFTSHIFT),
-- KEY(4, 1, KEY_S),
-- KEY(4, 2, KEY_R),
-- KEY(4, 3, KEY_B),
-- KEY(4, 4, KEY_N),
-- KEY(4, 5, TOSA_KEY_CALENDAR),
-- KEY(4, 6, TOSA_KEY_HOMEPAGE),
-- KEY(4, 7, KEY_LEFTCTRL),
-- KEY(4, 8, TOSA_KEY_LIGHT),
-- KEY(4, 10, KEY_RIGHTSHIFT),
-- KEY(5, 1, KEY_TAB),
-- KEY(5, 2, KEY_SLASH),
-- KEY(5, 3, KEY_H),
-- KEY(5, 4, KEY_M),
-- KEY(5, 5, TOSA_KEY_MENU),
-- KEY(5, 7, KEY_UP),
-- KEY(5, 11, TOSA_KEY_FN),
-- KEY(6, 1, KEY_X),
-- KEY(6, 2, KEY_F),
-- KEY(6, 3, KEY_SPACE),
-- KEY(6, 4, KEY_APOSTROPHE),
-- KEY(6, 5, TOSA_KEY_MAIL),
-- KEY(6, 6, KEY_LEFT),
-- KEY(6, 7, KEY_DOWN),
-- KEY(6, 8, KEY_RIGHT),
-+ KEY(0, 1, KEY_W),
-+ KEY(0, 5, KEY_K),
-+ KEY(0, 6, KEY_BACKSPACE),
-+ KEY(0, 7, KEY_P),
-+ KEY(1, 0, KEY_Q),
-+ KEY(1, 1, KEY_E),
-+ KEY(1, 2, KEY_T),
-+ KEY(1, 3, KEY_Y),
-+ KEY(1, 5, KEY_O),
-+ KEY(1, 6, KEY_I),
-+ KEY(1, 7, KEY_COMMA),
-+ KEY(2, 0, KEY_A),
-+ KEY(2, 1, KEY_D),
-+ KEY(2, 2, KEY_G),
-+ KEY(2, 3, KEY_U),
-+ KEY(2, 5, KEY_L),
-+ KEY(2, 6, KEY_ENTER),
-+ KEY(2, 7, KEY_DOT),
-+ KEY(3, 0, KEY_Z),
-+ KEY(3, 1, KEY_C),
-+ KEY(3, 2, KEY_V),
-+ KEY(3, 3, KEY_J),
-+ KEY(3, 4, TOSA_KEY_ADDRESSBOOK),
-+ KEY(3, 5, TOSA_KEY_CANCEL),
-+ KEY(3, 6, TOSA_KEY_CENTER),
-+ KEY(3, 7, TOSA_KEY_OK),
-+ KEY(3, 8, KEY_LEFTSHIFT),
-+ KEY(4, 0, KEY_S),
-+ KEY(4, 1, KEY_R),
-+ KEY(4, 2, KEY_B),
-+ KEY(4, 3, KEY_N),
-+ KEY(4, 4, TOSA_KEY_CALENDAR),
-+ KEY(4, 5, TOSA_KEY_HOMEPAGE),
-+ KEY(4, 6, KEY_LEFTCTRL),
-+ KEY(4, 7, TOSA_KEY_LIGHT),
-+ KEY(4, 9, KEY_RIGHTSHIFT),
-+ KEY(5, 0, KEY_TAB),
-+ KEY(5, 1, KEY_SLASH),
-+ KEY(5, 2, KEY_H),
-+ KEY(5, 3, KEY_M),
-+ KEY(5, 4, TOSA_KEY_MENU),
-+ KEY(5, 6, KEY_UP),
-+ KEY(5, 10, TOSA_KEY_FN),
-+ KEY(6, 0, KEY_X),
-+ KEY(6, 1, KEY_F),
-+ KEY(6, 2, KEY_SPACE),
-+ KEY(6, 3, KEY_APOSTROPHE),
-+ KEY(6, 4, TOSA_KEY_MAIL),
-+ KEY(6, 5, KEY_LEFT),
-+ KEY(6, 6, KEY_DOWN),
-+ KEY(6, 7, KEY_RIGHT),
- };
-
- static struct matrix_keymap_data tosakbd_keymap_data = {
diff --git a/recipes-kernel/linux/linux-yocto-dev/patches/patches-sa1100/arm-sa1100-add-cpu-clock.patch b/recipes-kernel/linux/linux-yocto-dev/patches/patches-sa1100/arm-sa1100-add-cpu-clock.patch
deleted file mode 100644
index cf3e23b..0000000
--- a/recipes-kernel/linux/linux-yocto-dev/patches/patches-sa1100/arm-sa1100-add-cpu-clock.patch
+++ /dev/null
@@ -1,95 +0,0 @@
-From 6abd8c6c642b7f5da4a8065fa6b29c4c90df308d Mon Sep 17 00:00:00 2001
-From: Dmitry Eremin-Solenikov <dbaryshkov at gmail.com>
-Date: Mon, 11 Nov 2013 22:53:36 +0400
-Subject: [PATCH 1/2] arm: sa1100: add cpu clock
-
-Both SA1100 framebuffer and PCMCIA drivers require knowledge of cpu
-frequency to correctly program timings. Currently they receive timing
-information by calling cpufreq_get(0). However if cpu frequency driver
-is not enabled (e.g. due to unsupported DRAM chip/board on sa1110)
-cpufreq_get(0) returns 0, causing incorrect timings to be programmed.
-
-Add cpu clock returning cpu frequency, to be used by sa11x0 fb and
-pcmcia drivers.
-
-Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov at gmail.com>
----
- arch/arm/mach-sa1100/clock.c | 34 ++++++++++++++++++++++++++++++++++
- 1 file changed, 34 insertions(+)
-
-diff --git a/arch/arm/mach-sa1100/clock.c b/arch/arm/mach-sa1100/clock.c
-index 172ebd0..abf1dc1 100644
---- a/arch/arm/mach-sa1100/clock.c
-+++ b/arch/arm/mach-sa1100/clock.c
-@@ -15,10 +15,12 @@
- #include <linux/clkdev.h>
-
- #include <mach/hardware.h>
-+#include <mach/generic.h>
-
- struct clkops {
- void (*enable)(struct clk *);
- void (*disable)(struct clk *);
-+ unsigned long (*get_rate)(struct clk *);
- };
-
- struct clk {
-@@ -51,6 +53,19 @@ static void clk_gpio27_disable(struct clk *clk)
- GAFR &= ~GPIO_32_768kHz;
- }
-
-+static void clk_cpu_enable(struct clk *clk)
-+{
-+}
-+
-+static void clk_cpu_disable(struct clk *clk)
-+{
-+}
-+
-+static unsigned long clk_cpu_get_rate(struct clk *clk)
-+{
-+ return sa11x0_getspeed(0) * 1000;
-+}
-+
- int clk_enable(struct clk *clk)
- {
- unsigned long flags;
-@@ -80,16 +95,35 @@ void clk_disable(struct clk *clk)
- }
- EXPORT_SYMBOL(clk_disable);
-
-+unsigned long clk_get_rate(struct clk *clk)
-+{
-+ if (clk && clk->ops && clk->ops->get_rate)
-+ return clk->ops->get_rate(clk);
-+ else
-+ return 0;
-+}
-+EXPORT_SYMBOL(clk_get_rate);
-+
- const struct clkops clk_gpio27_ops = {
- .enable = clk_gpio27_enable,
- .disable = clk_gpio27_disable,
- };
-
-+const struct clkops clk_cpu_ops = {
-+ .enable = clk_cpu_enable,
-+ .disable = clk_cpu_disable,
-+ .get_rate = clk_cpu_get_rate,
-+};
-+
- static DEFINE_CLK(gpio27, &clk_gpio27_ops);
-
-+static DEFINE_CLK(cpu, &clk_cpu_ops);
-+
- static struct clk_lookup sa11xx_clkregs[] = {
- CLKDEV_INIT("sa1111.0", NULL, &clk_gpio27),
- CLKDEV_INIT("sa1100-rtc", NULL, NULL),
-+ CLKDEV_INIT("sa11x0-fb", NULL, &clk_cpu),
-+ CLKDEV_INIT("sa11x0-pcmcia", NULL, &clk_cpu),
- };
-
- static int __init sa11xx_clk_init(void)
---
-1.8.4.2
-
diff --git a/recipes-kernel/linux/linux-yocto-dev/patches/patches-sa1100/collie-add-bootblock.patch b/recipes-kernel/linux/linux-yocto-dev/patches/patches-sa1100/collie-add-bootblock.patch
deleted file mode 100644
index 9f5aaa7..0000000
--- a/recipes-kernel/linux/linux-yocto-dev/patches/patches-sa1100/collie-add-bootblock.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From 0b6559d7a3e28c89c3093fd193076a5d7d7c699b Mon Sep 17 00:00:00 2001
-From: Andrea Adami <andrea.adami at gmail.com>
-Date: Sat, 9 Nov 2013 16:30:01 +0100
-Subject: [PATCH] linux-yocto: collie: add top boot partition
-
-Signed-off-by: Andrea Adami <andrea.adami at gmail.com>
----
- arch/arm/mach-sa1100/collie.c | 5 +++++
- 1 file changed, 5 insertions(+)
-
-diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
-index 946fa71..2785e6e 100644
---- a/arch/arm/mach-sa1100/collie.c
-+++ b/arch/arm/mach-sa1100/collie.c
-@@ -294,6 +294,11 @@ static struct mtd_partition collie_partitions[] = {
- .name = "rootfs",
- .offset = MTDPART_OFS_APPEND,
- .size = 0x00e20000,
-+ }, {
-+ .name = "bootblock",
-+ .offset = MTDPART_OFS_APPEND,
-+ .size = 0x00020000,
-+ .mask_flags = MTD_WRITEABLE
- }
- };
-
---
-1.8.1.5
-
diff --git a/recipes-kernel/linux/linux-yocto-dev/patches/patches-sa1100/collie-irda.patch b/recipes-kernel/linux/linux-yocto-dev/patches/patches-sa1100/collie-irda.patch
deleted file mode 100644
index 46ad808..0000000
--- a/recipes-kernel/linux/linux-yocto-dev/patches/patches-sa1100/collie-irda.patch
+++ /dev/null
@@ -1,88 +0,0 @@
-From c6fb61edf283f255c3763a57366bb89bb36ad79c Mon Sep 17 00:00:00 2001
-From: Dmitry Eremin-Solenikov <dbaryshkov at gmail.com>
-Date: Fri, 8 Nov 2013 17:57:32 +0400
-Subject: [PATCH] collie: add support for IrDA transceiver
-
-Collie has onboard IrDA transceiver controlled via active-low gpio. Add
-corresponding platform data.
-
-Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov at gmail.com>
----
- arch/arm/mach-sa1100/collie.c | 33 ++++++++++++++++++++++++++++++
- arch/arm/mach-sa1100/include/mach/collie.h | 2 +-
- 2 files changed, 34 insertions(+), 1 deletion(-)
-
-diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
-index 2349dee..1b9473d 100644
---- a/arch/arm/mach-sa1100/collie.c
-+++ b/arch/arm/mach-sa1100/collie.c
-@@ -41,6 +41,7 @@
- #include <asm/mach/arch.h>
- #include <asm/mach/flash.h>
- #include <asm/mach/map.h>
-+#include <asm/mach/irda.h>
-
- #include <asm/hardware/scoop.h>
- #include <asm/mach/sharpsl_param.h>
-@@ -94,6 +95,37 @@ static struct mcp_plat_data collie_mcp_data = {
- .codec_pdata = &collie_ucb1x00_data,
- };
-
-+int collie_ir_startup(struct device *dev)
-+{
-+ int rc = gpio_request(COLLIE_GPIO_IR_ON, "IrDA");
-+ if (rc)
-+ return rc;
-+ rc = gpio_direction_output(COLLIE_GPIO_IR_ON, 1);
-+
-+ if (!rc)
-+ return 0;
-+
-+ gpio_free(COLLIE_GPIO_IR_ON);
-+ return rc;
-+}
-+
-+void collie_ir_shutdown(struct device *dev)
-+{
-+ gpio_free(COLLIE_GPIO_IR_ON);
-+}
-+
-+static int collie_ir_set_power(struct device *dev, unsigned int state)
-+{
-+ gpio_set_value(COLLIE_GPIO_IR_ON, !state);
-+ return 0;
-+}
-+
-+static struct irda_platform_data collie_ir_data = {
-+ .startup = collie_ir_startup,
-+ .shutdown = collie_ir_shutdown,
-+ .set_power = collie_ir_set_power,
-+};
-+
- /*
- * Collie AC IN
- */
-@@ -323,6 +355,7 @@ static void __init collie_init(void)
- sa11x0_register_mtd(&collie_flash_data, collie_flash_resources,
- ARRAY_SIZE(collie_flash_resources));
- sa11x0_register_mcp(&collie_mcp_data);
-+ sa11x0_register_irda(&collie_ir_data);
-
- sharpsl_save_param();
- }
-diff --git a/arch/arm/mach-sa1100/include/mach/collie.h b/arch/arm/mach-sa1100/include/mach/collie.h
-index f33679d..0ef22f9 100644
---- a/arch/arm/mach-sa1100/include/mach/collie.h
-+++ b/arch/arm/mach-sa1100/include/mach/collie.h
-@@ -78,7 +78,7 @@ extern void locomolcd_power(int on);
- #define COLLIE_TC35143_GPIO_VERSION0 UCB_IO_0
- #define COLLIE_TC35143_GPIO_TBL_CHK UCB_IO_1
- #define COLLIE_TC35143_GPIO_VPEN_ON UCB_IO_2
--#define COLLIE_TC35143_GPIO_IR_ON UCB_IO_3
-+#define COLLIE_GPIO_IR_ON (COLLIE_TC35143_GPIO_BASE + 3)
- #define COLLIE_TC35143_GPIO_AMP_ON UCB_IO_4
- #define COLLIE_TC35143_GPIO_VERSION1 UCB_IO_5
- #define COLLIE_TC35143_GPIO_FS8KLPF UCB_IO_5
---
-1.8.4.rc3
-
diff --git a/recipes-kernel/linux/linux-yocto-dev/patches/patches-sa1100/fbdev-sa1100fb-make-use-of-device-clock.patch b/recipes-kernel/linux/linux-yocto-dev/patches/patches-sa1100/fbdev-sa1100fb-make-use-of-device-clock.patch
deleted file mode 100644
index c510ef1..0000000
--- a/recipes-kernel/linux/linux-yocto-dev/patches/patches-sa1100/fbdev-sa1100fb-make-use-of-device-clock.patch
+++ /dev/null
@@ -1,112 +0,0 @@
-From 14edf9123f62bbfbfbffe38e2837b51b3a6065b5 Mon Sep 17 00:00:00 2001
-From: Dmitry Eremin-Solenikov <dbaryshkov at gmail.com>
-Date: Mon, 11 Nov 2013 22:58:02 +0400
-Subject: [PATCH 2/2] fbdev: sa1100fb: make use of device clock
-
-Use per-device clock (instead of calling cpufreq_get(0), which can
-return 0 if no cpu frequency driver is selected) to program timings.
-
-Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov at gmail.com>
----
-drivers/video/sa1100fb.c | 24 +++++++++++++++++-------
- drivers/video/sa1100fb.h | 1 +
- 2 files changed, 18 insertions(+), 7 deletions(-)
-
-diff --git a/drivers/video/sa1100fb.c b/drivers/video/sa1100fb.c
-index de76da0..05d1b37 100644
---- a/drivers/video/sa1100fb.c
-+++ b/drivers/video/sa1100fb.c
-@@ -178,6 +178,7 @@
- #include <linux/dma-mapping.h>
- #include <linux/mutex.h>
- #include <linux/io.h>
-+#include <linux/clk.h>
-
- #include <video/sa1100fb.h>
-
-@@ -413,9 +414,9 @@ sa1100fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
- var->transp.offset);
-
- #ifdef CONFIG_CPU_FREQ
-- dev_dbg(fbi->dev, "dma period = %d ps, clock = %d kHz\n",
-+ dev_dbg(fbi->dev, "dma period = %d ps, clock = %ld kHz\n",
- sa1100fb_display_dma_period(var),
-- cpufreq_get(smp_processor_id()));
-+ clk_get_rate(fbi->clk) / 1000);
- #endif
-
- return 0;
-@@ -586,9 +587,10 @@ static struct fb_ops sa1100fb_ops = {
- * Calculate the PCD value from the clock rate (in picoseconds).
- * We take account of the PPCR clock setting.
- */
--static inline unsigned int get_pcd(unsigned int pixclock, unsigned int cpuclock)
-+static inline unsigned int get_pcd(struct sa1100fb_info *fbi,
-+ unsigned int pixclock)
- {
-- unsigned int pcd = cpuclock / 100;
-+ unsigned int pcd = clk_get_rate(fbi->clk) / 100 / 1000;
-
- pcd *= pixclock;
- pcd /= 10000000;
-@@ -667,7 +669,7 @@ static int sa1100fb_activate_var(struct fb_var_screeninfo *var, struct sa1100fb_
- LCCR2_BegFrmDel(var->upper_margin) +
- LCCR2_EndFrmDel(var->lower_margin);
-
-- pcd = get_pcd(var->pixclock, cpufreq_get(0));
-+ pcd = get_pcd(fbi, var->pixclock);
- new_regs.lccr3 = LCCR3_PixClkDiv(pcd) | fbi->inf->lccr3 |
- (var->sync & FB_SYNC_HOR_HIGH_ACT ? LCCR3_HorSnchH : LCCR3_HorSnchL) |
- (var->sync & FB_SYNC_VERT_HIGH_ACT ? LCCR3_VrtSnchH : LCCR3_VrtSnchL);
-@@ -1003,7 +1005,6 @@ sa1100fb_freq_transition(struct notifier_block *nb, unsigned long val,
- void *data)
- {
- struct sa1100fb_info *fbi = TO_INF(nb, freq_transition);
-- struct cpufreq_freqs *f = data;
- u_int pcd;
-
- switch (val) {
-@@ -1012,7 +1013,7 @@ sa1100fb_freq_transition(struct notifier_block *nb, unsigned long val,
- break;
-
- case CPUFREQ_POSTCHANGE:
-- pcd = get_pcd(fbi->fb.var.pixclock, f->new);
-+ pcd = get_pcd(fbi, fbi->fb.var.pixclock);
- fbi->reg_lccr3 = (fbi->reg_lccr3 & ~0xff) | LCCR3_PixClkDiv(pcd);
- set_ctrlr_state(fbi, C_ENABLE_CLKCHANGE);
- break;
-@@ -1219,6 +1220,13 @@ static int sa1100fb_probe(struct platform_device *pdev)
- if (!fbi)
- goto failed;
-
-+ fbi->clk = clk_get(&pdev->dev, NULL);
-+ if (IS_ERR(fbi->clk)) {
-+ ret = PTR_ERR(fbi->clk);
-+ fbi->clk = NULL;
-+ goto failed;
-+ }
-+
- fbi->base = ioremap(res->start, resource_size(res));
- if (!fbi->base)
- goto failed;
-@@ -1271,6 +1279,8 @@ static int sa1100fb_probe(struct platform_device *pdev)
- failed:
- if (fbi)
- iounmap(fbi->base);
-+ if (fbi->clk)
-+ clk_put(fbi->clk);
- kfree(fbi);
- release_mem_region(res->start, resource_size(res));
- return ret;
-diff --git a/drivers/video/sa1100fb.h b/drivers/video/sa1100fb.h
-index fc5d429..0139d13 100644
---- a/drivers/video/sa1100fb.h
-+++ b/drivers/video/sa1100fb.h
-@@ -68,6 +68,7 @@ struct sa1100fb_info {
- #endif
-
- const struct sa1100fb_mach_info *inf;
-+ struct clk *clk;
- };
-
- #define TO_INF(ptr,member) container_of(ptr,struct sa1100fb_info,member)
diff --git a/recipes-kernel/linux/linux-yocto-dev/patches/patches-sa1100/pcmcia-sa1100-device-clock.patch b/recipes-kernel/linux/linux-yocto-dev/patches/patches-sa1100/pcmcia-sa1100-device-clock.patch
deleted file mode 100644
index 1d12fc8..0000000
--- a/recipes-kernel/linux/linux-yocto-dev/patches/patches-sa1100/pcmcia-sa1100-device-clock.patch
+++ /dev/null
@@ -1,100 +0,0 @@
-From patchwork Tue Nov 12 03:32:10 2013
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [3/5] pcmcia: sa1100: make use of device clock
-From: Dmitry Eremin-Solenikov <dbaryshkov at gmail.com>
-X-Patchwork-Id: 3170611
-Message-Id: <1384227132-10501-3-git-send-email-dbaryshkov at gmail.com>
-To: linux-arm-kernel at lists.infradead.org
-Cc: linux-fbdev at vger.kernel.org, linux-pcmcia at lists.infradead.org,
- Russell King <linux at arm.linux.org.uk>
-Date: Tue, 12 Nov 2013 07:32:10 +0400
-
-Use per-device clock (instead of calling cpufreq_get(0), which can
-return 0 if no cpu frequency driver is selected) to program timings.
-
-Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov at gmail.com>
-
----
-drivers/pcmcia/sa1100_generic.c | 1 +
- drivers/pcmcia/sa11xx_base.c | 14 ++++++++++++--
- 2 files changed, 13 insertions(+), 2 deletions(-)
-
-diff --git a/drivers/pcmcia/sa1100_generic.c b/drivers/pcmcia/sa1100_generic.c
-index ff8a027..d2ab060 100644
---- a/drivers/pcmcia/sa1100_generic.c
-+++ b/drivers/pcmcia/sa1100_generic.c
-@@ -93,6 +93,7 @@ static int sa11x0_drv_pcmcia_remove(struct platform_device *dev)
- for (i = 0; i < sinfo->nskt; i++)
- soc_pcmcia_remove_one(&sinfo->skt[i]);
-
-+ clk_put(sinfo->clk);
- kfree(sinfo);
- return 0;
- }
-diff --git a/drivers/pcmcia/sa11xx_base.c b/drivers/pcmcia/sa11xx_base.c
-index 6eecd7c..aef0e69 100644
---- a/drivers/pcmcia/sa11xx_base.c
-+++ b/drivers/pcmcia/sa11xx_base.c
-@@ -38,6 +38,7 @@
- #include <linux/spinlock.h>
- #include <linux/io.h>
- #include <linux/slab.h>
-+#include <linux/clk.h>
-
- #include <mach/hardware.h>
- #include <asm/irq.h>
-@@ -138,14 +139,15 @@ sa1100_pcmcia_frequency_change(struct soc_pcmcia_socket *skt,
- static int
- sa1100_pcmcia_set_timing(struct soc_pcmcia_socket *skt)
- {
-- return sa1100_pcmcia_set_mecr(skt, cpufreq_get(0));
-+ unsigned long clk = clk_get_rate(skt->clk);
-+ return sa1100_pcmcia_set_mecr(skt, clk / 1000);
- }
-
- static int
- sa1100_pcmcia_show_timing(struct soc_pcmcia_socket *skt, char *buf)
- {
- struct soc_pcmcia_timing timing;
-- unsigned int clock = cpufreq_get(0);
-+ unsigned int clock = clk_get_rate(skt->clk);
- unsigned long mecr = MECR;
- char *p = buf;
-
-@@ -221,6 +223,11 @@ int sa11xx_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops,
- struct skt_dev_info *sinfo;
- struct soc_pcmcia_socket *skt;
- int i, ret = 0;
-+ struct clk *clk;
-+
-+ clk = clk_get(dev, NULL);
-+ if (IS_ERR(clk))
-+ return -ENODEV;
-
- sa11xx_drv_pcmcia_ops(ops);
-
-@@ -229,12 +236,14 @@ int sa11xx_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops,
- return -ENOMEM;
-
- sinfo->nskt = nr;
-+ sinfo->clk = clk;
-
- /* Initialize processor specific parameters */
- for (i = 0; i < nr; i++) {
- skt = &sinfo->skt[i];
-
- skt->nr = first + i;
-+ skt->clk = clk;
- soc_pcmcia_init_one(skt, ops, dev);
-
- ret = sa11xx_drv_pcmcia_add_one(skt);
-@@ -245,6 +254,7 @@ int sa11xx_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops,
- if (ret) {
- while (--i >= 0)
- soc_pcmcia_remove_one(&sinfo->skt[i]);
-+ clk_put(clk);
- kfree(sinfo);
- } else {
- dev_set_drvdata(dev, sinfo);
diff --git a/recipes-kernel/linux/linux-yocto-dev/poodle/poodle-standard.scc b/recipes-kernel/linux/linux-yocto-dev/poodle/poodle-standard.scc
deleted file mode 100644
index 31ad9df..0000000
--- a/recipes-kernel/linux/linux-yocto-dev/poodle/poodle-standard.scc
+++ /dev/null
@@ -1,7 +0,0 @@
-define KMACHINE poodle
-define KTYPE standard
-define KARCH arm
-
-include ktypes/standard/standard.scc
-
-include poodle.scc
diff --git a/recipes-kernel/linux/linux-yocto-dev/poodle/poodle.cfg b/recipes-kernel/linux/linux-yocto-dev/poodle/poodle.cfg
deleted file mode 100644
index 8ae5c8e..0000000
--- a/recipes-kernel/linux/linux-yocto-dev/poodle/poodle.cfg
+++ /dev/null
@@ -1,57 +0,0 @@
-#
-# Processor Features
-#
-CONFIG_SHARP_LOCOMO=y
-
-#
-# End-user Products (sorted by vendor name)
-#
-CONFIG_MACH_POODLE=y
-CONFIG_PXA25x=y
-
-#
-# Boot options
-#
-CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 fbcon=rotate:1 loglevel=3"
-
-#
-# Disk-On-Chip Device Drivers
-#
-CONFIG_MTD_NAND_SHARPSL=y
-
-#
-# Input Device Drivers
-#
-CONFIG_KEYBOARD_LOCOMO=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=240
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
-
-#
-# Frame buffer hardware drivers
-#
-CONFIG_FB_PXA=y
-CONFIG_BACKLIGHT_LOCOMO=y
-
-#
-# Console display driver support
-#
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONT_8x8=y
-
-#
-# LED drivers
-#
-CONFIG_LEDS_LOCOMO=y
-
-#
-# USB Miscellaneous drivers
-#
-CONFIG_USB_PXA25X=m
-CONFIG_SND_PXA2XX_SOC_I2S=m
-CONFIG_SND_PXA2XX_SOC_POODLE=m
-CONFIG_SND_SOC_WM8731=m
diff --git a/recipes-kernel/linux/linux-yocto-dev/poodle/poodle.scc b/recipes-kernel/linux/linux-yocto-dev/poodle/poodle.scc
deleted file mode 100644
index e6bd6ac..0000000
--- a/recipes-kernel/linux/linux-yocto-dev/poodle/poodle.scc
+++ /dev/null
@@ -1,6 +0,0 @@
-kconf hardware poodle.cfg
-
-include ../zaurus-pxa-only.scc
-include ../zaurus-common.scc
-
-patch ../patches/patches-locomokbd/locomo_kbd_tweak-r2.patch
diff --git a/recipes-kernel/linux/linux-yocto-dev/shrink_kernel.cfg b/recipes-kernel/linux/linux-yocto-dev/shrink_kernel.cfg
deleted file mode 100644
index e784c03..0000000
--- a/recipes-kernel/linux/linux-yocto-dev/shrink_kernel.cfg
+++ /dev/null
@@ -1,28 +0,0 @@
-# CONFIG_MD is not set
-
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_AMD is not set
-# CONFIG_NET_CADENCE is not set
-# CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_CIRRUS is not set
-# CONFIG_NET_VENDOR_FARADAY is not set
-# CONFIG_NET_VENDOR_FUJITSU is not set
-# CONFIG_NET_VENDOR_HP is not set
-# CONFIG_NET_VENDOR_INTEL is not set
-# CONFIG_NET_VENDOR_MARVELL is not set
-# CONFIG_NET_VENDOR_MICREL is not set
-# CONFIG_NET_VENDOR_MICROCHIP is not set
-# CONFIG_NET_VENDOR_SEEQ is not set
-# CONFIG_NET_VENDOR_SMSC is not set
-# CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_WIZNET is not set
-# CONFIG_NET_VENDOR_XIRCOM is not set
-
-# CONFIG_FTRACE is not set
-# CONFIG_BRANCH_PROFILE_NONE is not set
-# CONFIG_BINARY_PRINTF is not set
-
-# CONFIG_KPROBES is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_KGDB is not set
diff --git a/recipes-kernel/linux/linux-yocto-dev/spitz/spitz-standard.scc b/recipes-kernel/linux/linux-yocto-dev/spitz/spitz-standard.scc
deleted file mode 100644
index 5b8e2c3..0000000
--- a/recipes-kernel/linux/linux-yocto-dev/spitz/spitz-standard.scc
+++ /dev/null
@@ -1,7 +0,0 @@
-define KMACHINE spitz
-define KTYPE standard
-define KARCH arm
-
-include ktypes/standard/standard.scc
-
-include spitz.scc
diff --git a/recipes-kernel/linux/linux-yocto-dev/spitz/spitz.cfg b/recipes-kernel/linux/linux-yocto-dev/spitz/spitz.cfg
deleted file mode 100644
index 85d5f0f..0000000
--- a/recipes-kernel/linux/linux-yocto-dev/spitz/spitz.cfg
+++ /dev/null
@@ -1,61 +0,0 @@
-#
-# Processor Features
-#
-CONFIG_IWMMXT=y
-
-#
-# End-user Products (sorted by vendor name)
-#
-CONFIG_MACH_AKITA=y
-CONFIG_MACH_SPITZ=y
-CONFIG_MACH_BORZOI=y
-CONFIG_PXA27x=y
-CONFIG_PXA_SHARP_Cxx00=y
-CONFIG_SHARPSL_PM=y
-CONFIG_SHARPSL_PM_MAX1111=y
-
-#
-# Boot options
-#
-CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 fbcon=rotate:1 loglevel=3"
-
-#
-# Disk-On-Chip Device Drivers
-#
-CONFIG_MTD_NAND_SHARPSL=y
-
-#
-# Input Device Drivers
-#
-CONFIG_KEYBOARD_MATRIX=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
-
-#
-# Frame buffer hardware drivers
-#
-CONFIG_FB_PXA=y
-CONFIG_FB_PXA_OVERLAY=y
-CONFIG_FB_PXA_SMARTPANEL=y
-CONFIG_FB_PXA_PARAMETERS=y
-CONFIG_LCD_CORGI=y
-CONFIG_BACKLIGHT_GENERIC=y
-
-#
-# Console display driver support
-#
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONT_8x16=y
-
-#
-# USB Miscellaneous drivers
-#
-CONFIG_USB_PXA27X=m
-CONFIG_SND_PXA2XX_SOC_I2S=m
-CONFIG_SND_PXA2XX_SOC_SPITZ=m
-CONFIG_SND_SOC_WM8750=m
diff --git a/recipes-kernel/linux/linux-yocto-dev/spitz/spitz.scc b/recipes-kernel/linux/linux-yocto-dev/spitz/spitz.scc
deleted file mode 100644
index 4508a3c..0000000
--- a/recipes-kernel/linux/linux-yocto-dev/spitz/spitz.scc
+++ /dev/null
@@ -1,5 +0,0 @@
-kconf hardware spitz.cfg
-
-include ../zaurus-pxa-only.scc
-include ../zaurus-common.scc
-include ../zaurus-usb-host.scc
diff --git a/recipes-kernel/linux/linux-yocto-dev/tosa/tosa-standard.scc b/recipes-kernel/linux/linux-yocto-dev/tosa/tosa-standard.scc
deleted file mode 100644
index b2e1324..0000000
--- a/recipes-kernel/linux/linux-yocto-dev/tosa/tosa-standard.scc
+++ /dev/null
@@ -1,7 +0,0 @@
-define KMACHINE tosa
-define KTYPE standard
-define KARCH arm
-
-include ktypes/standard/standard.scc
-
-include tosa.scc
diff --git a/recipes-kernel/linux/linux-yocto-dev/tosa/tosa.cfg b/recipes-kernel/linux/linux-yocto-dev/tosa/tosa.cfg
deleted file mode 100644
index 77aedfe..0000000
--- a/recipes-kernel/linux/linux-yocto-dev/tosa/tosa.cfg
+++ /dev/null
@@ -1,65 +0,0 @@
-#
-# End-user Products (sorted by vendor name)
-#
-CONFIG_MACH_TOSA=y
-CONFIG_TOSA_BT=m
-CONFIG_PXA25x=y
-
-#
-# Boot options
-#
-CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 loglevel=3"
-
-#
-# Multifunction device drivers
-#
-CONFIG_MFD_CORE=y
-CONFIG_MFD_TMIO=y
-CONFIG_MFD_TC6393XB=y
-
-#
-# Disk-On-Chip Device Drivers
-#
-CONFIG_MTD_NAND_TMIO=y
-
-#
-# Input Device Drivers
-#
-CONFIG_KEYBOARD_MATRIX=y
-CONFIG_TOUCHSCREEN_WM97XX=m
-CONFIG_TOUCHSCREEN_WM9705=y
-CONFIG_TOUCHSCREEN_WM9712=y
-CONFIG_TOUCHSCREEN_WM9713=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
-
-#
-# Frame buffer hardware drivers
-#
-CONFIG_FB_TMIO=y
-CONFIG_FB_TMIO_ACCELL=y
-CONFIG_LCD_TOSA=y
-CONFIG_BACKLIGHT_GENERIC=y
-CONFIG_BACKLIGHT_TOSA=y
-
-#
-# Console display driver support
-#
-CONFIG_FONT_8x16=y
-
-#
-# USB Miscellaneous drivers
-#
-CONFIG_USB_PXA25X=m
-CONFIG_SND_PXA2XX_SOC_AC97=m
-CONFIG_SND_PXA2XX_SOC_TOSA=m
-CONFIG_SND_SOC_WM9712=m
-CONFIG_SND_SOC_AC97_BUS=y
-
-# USB GPIO expanders:
-#
-CONFIG_BATTERY_TOSA=m
diff --git a/recipes-kernel/linux/linux-yocto-dev/tosa/tosa.scc b/recipes-kernel/linux/linux-yocto-dev/tosa/tosa.scc
deleted file mode 100644
index b55a878..0000000
--- a/recipes-kernel/linux/linux-yocto-dev/tosa/tosa.scc
+++ /dev/null
@@ -1,7 +0,0 @@
-kconf hardware tosa.cfg
-
-include ../zaurus-pxa-only.scc
-include ../zaurus-common.scc
-include ../zaurus-usb-host.scc
-
-patch ../patches/patches-pxa/tosa-keys-mapping.patch
diff --git a/recipes-kernel/linux/linux-yocto-dev/zaurus-common.scc b/recipes-kernel/linux/linux-yocto-dev/zaurus-common.scc
deleted file mode 100644
index 975446d..0000000
--- a/recipes-kernel/linux/linux-yocto-dev/zaurus-common.scc
+++ /dev/null
@@ -1,14 +0,0 @@
-kconf hardware zaurus-hardware.cfg
-kconf non-hardware zaurus-non-hardware.cfg
-
-include cfg/fs/flash_fs.scc
-include cfg/fs/vfat.scc
-include cfg/8250.scc
-include cfg/sound.scc
-
-include features/vfat/vfat.scc
-include features/scsi/disk.scc
-include features/hostapd/hostapd.scc
-include features/mac80211/mac80211.scc
-
-kconf hardware shrink_kernel.cfg
diff --git a/recipes-kernel/linux/linux-yocto-dev/zaurus-hardware.cfg b/recipes-kernel/linux/linux-yocto-dev/zaurus-hardware.cfg
deleted file mode 100644
index 9973944..0000000
--- a/recipes-kernel/linux/linux-yocto-dev/zaurus-hardware.cfg
+++ /dev/null
@@ -1,277 +0,0 @@
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-CONFIG_GENERIC_BUG=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-
-
-#
-# Processor Features
-#
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_ARM_NR_BANKS=8
-CONFIG_SHARP_PARAM=y
-CONFIG_SHARP_SCOOP=y
-
-#
-# Power management options
-#
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_PM_SLEEP=y
-CONFIG_PM_RUNTIME=y
-CONFIG_PM=y
-CONFIG_APM_EMULATION=y
-CONFIG_PM_CLK=y
-CONFIG_CPU_PM=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARM_CPU_SUSPEND=y
-
-#
-# Generic Driver Options
-#
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_ROM=y
-
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=y
-
-#
-# Disk-On-Chip Device Drivers
-#
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_IDS=y
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_APMPOWER=y
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-CONFIG_DEVKMEM=y
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_CS=m
-
-#
-# Non-8250 serial port support
-#
-CONFIG_HW_RANDOM=m
-
-#
-# PCMCIA character devices
-#
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# Other I2C/SMBus bus drivers
-#
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# Enable Device Drivers -> PPS to see the PTP clock options.
-#
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_SYSFS=y
-
-#
-# MODULbus GPIO expanders:
-#
-CONFIG_POWER_SUPPLY=y
-CONFIG_POWER_SUPPLY_DEBUG=y
-CONFIG_PDA_POWER=y
-CONFIG_APM_POWER=y
-CONFIG_HWMON=y
-
-#
-# Native drivers
-#
-CONFIG_SENSORS_MAX1111=y
-
-#
-# USB-based Watchdog Cards
-#
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Graphics support
-#
-CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-
-#
-# Frame buffer hardware drivers
-#
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_CLUT224=y
-CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_JACK=y
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-CONFIG_SND_DRIVERS=y
-CONFIG_SND_ARM=y
-CONFIG_SND_SPI=y
-CONFIG_SND_PCMCIA=y
-CONFIG_SND_SOC=m
-CONFIG_SND_SOC_I2C_AND_SPI=m
-CONFIG_HID=m
-
-#
-# Special HID drivers
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_OTG_WHITELIST=y
-
-#
-# USB Miscellaneous drivers
-#
-CONFIG_USB_GADGET=m
-CONFIG_USB_GADGET_DEBUG_FILES=y
-CONFIG_USB_GADGET_DEBUG_FS=y
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
-CONFIG_USB_ZERO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-CONFIG_USB_ETH_EEM=y
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_MASS_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_USB_CDC_COMPOSITE=m
-CONFIG_USB_G_MULTI=m
-CONFIG_USB_G_MULTI_RNDIS=y
-CONFIG_USB_G_MULTI_CDC=y
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-
-#
-# on-CPU RTC drivers
-#
-CONFIG_RTC_DRV_SA1100=y
-
-#
-# Kernel hacking
-#
-CONFIG_ARM_UNWIND=y
diff --git a/recipes-kernel/linux/linux-yocto-dev/zaurus-non-hardware.cfg b/recipes-kernel/linux/linux-yocto-dev/zaurus-non-hardware.cfg
deleted file mode 100644
index 0dd4da9..0000000
--- a/recipes-kernel/linux/linux-yocto-dev/zaurus-non-hardware.cfg
+++ /dev/null
@@ -1,396 +0,0 @@
-#CONFIG_NETFILTER is not set
-
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-#
-# General setup
-#
-CONFIG_KTIME_SCALAR=y
-
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_IRQ_WORK=y
-
-#
-# General setup
-#
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_CROSS_COMPILE=""
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_LZMA=y
-CONFIG_DEFAULT_HOSTNAME="(none)"
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_HAVE_GENERIC_HARDIRQS=y
-
-#
-# IRQ subsystem
-#
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_SPARSE_IRQ=y
-
-#
-# RCU Subsystem
-#
-CONFIG_TINY_RCU=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_XZ=y
-CONFIG_RD_LZO=y
-CONFIG_ANON_INODES=y
-CONFIG_EXPERT=y
-CONFIG_UID16=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
-CONFIG_SLAB=y
-
-#
-# GCOV-based kernel profiling
-#
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_BLK_DEV_BSG=y
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-
-#
-# IO Schedulers
-#
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-CONFIG_INLINE_READ_UNLOCK=y
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-CONFIG_INLINE_WRITE_UNLOCK=y
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-
-#
-# Bus support
-#
-CONFIG_PCCARD=y
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-
-#
-# PC-card bridges
-#
-CONFIG_PCMCIA_SOC_COMMON=y
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_HZ=100
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE_FROM_BOOTLOADER=y
-CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# Network testing
-#
-CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
-CONFIG_IRLAN=m
-CONFIG_IRNET=m
-CONFIG_IRCOMM=m
-
-#
-# FIR device drivers
-#
-CONFIG_BT=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIBTSDIO=m
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIUART_ATH3K=y
-CONFIG_BT_HCIUART_LL=y
-CONFIG_BT_HCIDTL1=m
-CONFIG_BT_HCIBT3C=m
-CONFIG_BT_HCIBLUECARD=m
-CONFIG_BT_HCIBTUART=m
-CONFIG_BT_HCIVHCI=m
-CONFIG_BT_MRVL=m
-CONFIG_BT_MRVL_SDIO=m
-CONFIG_WIRELESS=y
-CONFIG_WEXT_CORE=y
-CONFIG_WEXT_PROC=y
-CONFIG_WEXT_SPY=y
-CONFIG_WEXT_PRIV=y
-CONFIG_LIB80211_CRYPT_WEP=m
-CONFIG_LIB80211_CRYPT_CCMP=m
-CONFIG_LIB80211_CRYPT_TKIP=m
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH=""
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=m
-CONFIG_REGMAP_SPI=m
-
-#
-# LPDDR flash memory drivers
-#
-CONFIG_BLK_DEV=y
-
-#
-# Altera FPGA firmware download module
-#
-CONFIG_HAVE_IDE=y
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-CONFIG_SCSI_DMA=y
-
-#
-# SCSI Transports
-#
-CONFIG_SCSI_LOWLEVEL=y
-CONFIG_ATA=y
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_SATA_PMP=y
-
-#
-# Controllers with non-SFF native interface
-#
-CONFIG_ATA_SFF=y
-
-#
-# SFF controllers with custom DMA interface
-#
-CONFIG_ATA_BMDMA=y
-
-#
-# PIO-only SFF controllers
-#
-CONFIG_PATA_PCMCIA=y
-
-#
-# CAIF transport drivers
-#
-CONFIG_ETHERNET=y
-CONFIG_NET_VENDOR_3COM=y
-CONFIG_NET_VENDOR_AMD=y
-CONFIG_NET_VENDOR_BROADCOM=y
-CONFIG_NET_VENDOR_CHELSIO=y
-CONFIG_NET_VENDOR_CIRRUS=y
-CONFIG_NET_VENDOR_FARADAY=y
-CONFIG_NET_VENDOR_FUJITSU=y
-CONFIG_NET_VENDOR_INTEL=y
-CONFIG_NET_VENDOR_I825XX=y
-CONFIG_NET_VENDOR_MARVELL=y
-CONFIG_NET_VENDOR_MICREL=y
-CONFIG_NET_VENDOR_MICROCHIP=y
-CONFIG_NET_VENDOR_NATSEMI=y
-CONFIG_NET_VENDOR_8390=y
-CONFIG_PCMCIA_PCNET=m
-CONFIG_NET_VENDOR_SEEQ=y
-CONFIG_NET_VENDOR_SMSC=y
-CONFIG_NET_VENDOR_STMICRO=y
-CONFIG_NET_VENDOR_XIRCOM=y
-CONFIG_SLHC=m
-
-#
-# USB Network Adapters
-#
-CONFIG_AIRO_CS=m
-CONFIG_HOSTAP=m
-CONFIG_HOSTAP_FIRMWARE=y
-CONFIG_HOSTAP_CS=m
-
-#
-# Character devices
-#
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE_SLEEP=y
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_BCMA_POSSIBLE=y
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_GPIO_VBUS=m
-CONFIG_USB_ULPI=y
-CONFIG_NOP_USB_XCEIV=m
-#
-CONFIG_MMC=y
-CONFIG_MMC_UNSAFE_RESUME=y
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_MINORS=8
-CONFIG_MMC_BLOCK_BOUNCE=y
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-CONFIG_MMC_SPI=y
-
-#
-# Hardware Spinlock drivers
-#
-CONFIG_CLKSRC_MMIO=y
-CONFIG_IOMMU_SUPPORT=y
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT4_FS=y
-CONFIG_JBD=y
-CONFIG_JBD2=y
-CONFIG_EXPORTFS=m
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_INOTIFY_USER=y
-CONFIG_GENERIC_ACL=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_TMPFS_XATTR=y
-CONFIG_MISC_FILESYSTEMS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
-CONFIG_JFFS2_CMODE_PRIORITY=y
-CONFIG_UBIFS_FS=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_DEF_FILE_IO_SIZE=4096
-CONFIG_NFS_USE_KERNEL_DNS=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_NLS=y
-
-#
-# Kernel hacking
-#
-CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_RING_BUFFER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-CONFIG_BRANCH_PROFILE_NONE=y
-CONFIG_HAVE_ARCH_KGDB=y
-
-#
-# Security options
-#
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
-CONFIG_CRC7=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_AVERAGE=y
diff --git a/recipes-kernel/linux/linux-yocto-dev/zaurus-pxa-common-non-hw.cfg b/recipes-kernel/linux/linux-yocto-dev/zaurus-pxa-common-non-hw.cfg
deleted file mode 100644
index 75c3626..0000000
--- a/recipes-kernel/linux/linux-yocto-dev/zaurus-pxa-common-non-hw.cfg
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# Microsoft Hyper-V guest support
-#
-CONFIG_CLKDEV_LOOKUP=y
-
-#
-# End-user Products (sorted by vendor name)
-#
-CONFIG_PXA_SSP=y
diff --git a/recipes-kernel/linux/linux-yocto-dev/zaurus-pxa-common.cfg b/recipes-kernel/linux/linux-yocto-dev/zaurus-pxa-common.cfg
deleted file mode 100644
index 538e19c..0000000
--- a/recipes-kernel/linux/linux-yocto-dev/zaurus-pxa-common.cfg
+++ /dev/null
@@ -1,103 +0,0 @@
-#
-# System Type
-#
-CONFIG_ARCH_PXA=y
-
-#
-# End-user Products (sorted by vendor name)
-#
-CONFIG_PXA_SHARPSL=y
-
-#
-# System MMU
-#
-CONFIG_PLAT_PXA=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_USE_DOMAINS=y
-
-#
-# Processor Features
-#
-CONFIG_XSCALE_PMU=y
-CONFIG_MULTI_IRQ_HANDLER=y
-
-#
-# PC-card bridges
-#
-CONFIG_PCMCIA_PXA2XX=y
-
-#
-# Kernel Features
-#
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HW_PERF_EVENTS=y
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-
-#
-# Boot options
-#
-CONFIG_AUTO_ZRELADDR=y
-
-#
-# FIR device drivers
-#
-CONFIG_PXA_FICP=m
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-
-#
-# PATA SFF controllers with BMDMA
-#
-CONFIG_PATA_PXA=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-CONFIG_I2C_PXA=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_PXA2XX=y
-
-
-#
-# Console display driver support
-#
-CONFIG_SND_VMASTER=y
-CONFIG_SND_PXA2XX_PCM=m
-CONFIG_SND_PXA2XX_LIB=m
-CONFIG_SND_PXA2XX_LIB_AC97=y
-CONFIG_SND_PXA2XX_AC97=m
-CONFIG_SND_PXA2XX_SOC=m
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-CONFIG_MMC_PXA=y
diff --git a/recipes-kernel/linux/linux-yocto-dev/zaurus-pxa-only.scc b/recipes-kernel/linux/linux-yocto-dev/zaurus-pxa-only.scc
deleted file mode 100644
index 037a2e4..0000000
--- a/recipes-kernel/linux/linux-yocto-dev/zaurus-pxa-only.scc
+++ /dev/null
@@ -1,2 +0,0 @@
-kconf hardware zaurus-pxa-common.cfg
-kconf non-hardware zaurus-pxa-common-non-hw.cfg
diff --git a/recipes-kernel/linux/linux-yocto-dev/zaurus-usb-host.scc b/recipes-kernel/linux/linux-yocto-dev/zaurus-usb-host.scc
deleted file mode 100644
index 19f7523..0000000
--- a/recipes-kernel/linux/linux-yocto-dev/zaurus-usb-host.scc
+++ /dev/null
@@ -1,6 +0,0 @@
-kconf hardware zaurus-usb-ohci.cfg
-kconf non-hardware zaurus-usb-ohci-non-hw.cfg
-
-include features/usb/ohci-hcd.scc
-include features/usb-net/usb-net.scc
-#include cfg/usb-mass-storage.scc
diff --git a/recipes-kernel/linux/linux-yocto-dev/zaurus-usb-ohci-non-hw.cfg b/recipes-kernel/linux/linux-yocto-dev/zaurus-usb-ohci-non-hw.cfg
deleted file mode 100644
index f20d7e6..0000000
--- a/recipes-kernel/linux/linux-yocto-dev/zaurus-usb-ohci-non-hw.cfg
+++ /dev/null
@@ -1,4 +0,0 @@
-#
-# Console display driver support
-#
-CONFIG_SND_RAWMIDI_SEQ=m
diff --git a/recipes-kernel/linux/linux-yocto-dev/zaurus-usb-ohci.cfg b/recipes-kernel/linux/linux-yocto-dev/zaurus-usb-ohci.cfg
deleted file mode 100644
index 5cf2099..0000000
--- a/recipes-kernel/linux/linux-yocto-dev/zaurus-usb-ohci.cfg
+++ /dev/null
@@ -1,105 +0,0 @@
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIBTUSB=m
-CONFIG_BT_HCIBCM203X=m
-CONFIG_BT_HCIBPA10X=m
-CONFIG_BT_HCIBFUSB=m
-CONFIG_BT_ATH3K=m
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_CATC=m
-CONFIG_USB_SIERRA_NET=m
-
-#
-# Console display driver support
-#
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
-CONFIG_SND_USB=y
-CONFIG_SND_USB_AUDIO=m
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-
-#
-# USB HID Boot Protocol drivers
-#
-CONFIG_USB_KBD=m
-CONFIG_USB_MOUSE=m
-
-#
-# Special HID drivers
-#
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_MON=m
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_SL811_HCD=m
-CONFIG_USB_SL811_CS=m
-
-#
-# USB Device Class drivers
-#
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-
-#
-# USB Imaging devices
-#
-CONFIG_USB_MDC800=m
-CONFIG_USB_MICROTEK=m
-
-#
-# USB port drivers
-#
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_BELKIN=m
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-CONFIG_USB_SERIAL_CYPRESS_M8=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IPAQ=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_EDGEPORT=m
-CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_GARMIN=m
-CONFIG_USB_SERIAL_IPW=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-CONFIG_USB_SERIAL_KEYSPAN=m
-CONFIG_USB_SERIAL_KLSI=m
-CONFIG_USB_SERIAL_KOBIL_SCT=m
-CONFIG_USB_SERIAL_MCT_U232=m
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_USB_SERIAL_SAFE=m
-CONFIG_USB_SERIAL_TI=m
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
-CONFIG_USB_SERIAL_WWAN=m
-CONFIG_USB_SERIAL_OMNINET=m
-
-#
-# USB Miscellaneous drivers
-#
-CONFIG_USB_EMI62=m
-CONFIG_USB_EMI26=m
-CONFIG_USB_RIO500=m
-CONFIG_USB_LEGOTOWER=m
-CONFIG_USB_LCD=m
-CONFIG_USB_LED=m
-CONFIG_USB_CYTHERM=m
-CONFIG_USB_IDMOUSE=m
--
1.8.1.5
More information about the Openembedded-devel
mailing list