[oe] meta-qt5

[Denys Dmytriyenko]

On Fri, Feb 07, 2014 at 11:47:16AM -0200, Otavio Salvador wrote:
> Hello,
> 
> On Mon, Feb 3, 2014 at 3:43 PM, Gary Thomas <gary at mlbassoc.com> wrote:
> > On 2014-02-03 10:37, Martin Jansa wrote:
> >>
> >> On Mon, Feb 03, 2014 at 12:07:30PM -0500, Kevyn-Alexandre Paré wrote:
> >>>
> >>> Morning Martin,
> >>
> >>
> >> morning,
> >>
> >>> I found your email from here:
> >>> http://layers.openembedded.org/layerindex/branch/master/layer/meta-qt5/
> >>>
> >>> I'm searching for help on that package/doc
> >>>
> >>> If you prefer I can send my question to a specific mailing list if you
> >>> pin point me where?
> >>
> >>
> >> openembedded-devel at lists.openembedded.org is better place (see README
> >> file)
> >>
> >>> So my goal is to run qt5 on my OMAP3 board by using yocto.
> >>>
> >>> I have fallow :
> >>> http://wiki.wandboard.org/index.php/Building_Qt5_using_yocto_on_Wandboard
> >>> and &
> >>> http://gpupowered.org/node/20
> >>>
> >>> Try to run this:
> >>> root at overo:/# export QT_DEBUG_BACKINGSTORE=1
> >>> root at overo:/# export QT_QPA_PLATFORM=minimal
> >>> root at overo:/# Qt5_CinematicExperience -plugin tslib
> >>> libpng warning: iCCP: known incorrect sRGB profile
> >>> libpng warning: iCCP: known incorrect sRGB profile
> >>> This plugin does not support createPlatformOpenGLContext!
> >>> QtQuick: failed to create OpenGL context
> >>> This plugin does not support createPlatformOpenGLContext!
> >>> QtQuick: failed to create OpenGL context
> >>>
> >>> Result:
> >>> nothing is visible on my LCD except the console...
> >>>
> >>> So do you have any idea where I should start digging to simply start
> >>> by making a qt5 example run on my board?
> >>
> >>
> >> I've no experience with wandaboard, but few people asked about it with
> >> relation to qt5, so maybe someone will respond on ML.
> >>
> >
> > This works on my SabreLite which I built without X11 support.  I did not
> > use any of your QT_xxx exports, only this command line.
> >
> >   # Qt5_CinematicExperience -platform eglfs -plugin
> > tslib:/dev/input/touchscreen0
> 
> Same works for Wandboard. I have one customer using it.

Not sure what omap3 board specifically that is, but meta-qt5 was successfully 
tested on another TI platform with OpenGLES on SGX - AM335x. No X11 though.

-- 
Denys