[oe] Building Qt5 using yocto on Wandboard-Error
Nilesh Kokane
nilesh.kokane at mindastoneridge.com
Wed Jul 23 11:37:03 UTC 2014
Hello ,
I've created a yocto image using the following URL
http://wiki.wandboard.org/index.php/Getting_started_with_Yocto_on_Wandboard
And trying to bring in Qt on wandboard using the following link
http://wiki.wandboard.org/index.php/Building_Qt5_using_yocto_on_Wandboard
Every thing goes fine until i give the following command
bitbake core-image-minimal
It pops out with following errors.
WARNING: Failed to fetch URL
http://download.qt-project.org/official_releases/qt/5.1/5.1.1/submodules/qtgraphicaleffects-opensource-src-5.1.1.tar.xz,
attempting MIRRORS if available
ERROR: Fetcher failure: Fetch command failed with exit code 4, no output
ERROR: Function failed: Fetcher failure for URL: '
http://download.qt-project.org/official_releases/qt/5.1/5.1.1/submodules/qtgraphicaleffects-opensource-src-5.1.1.tar.xz'.
Unable to fetch URL from any source.
ERROR: Logfile of failure stored in:
/home/minda/bin/fsl-community-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/qtgraphicaleffects/5.1.1-r0/temp/log.do_fetch.29384
ERROR: Task 1283
(/home/minda/bin/fsl-community-bsp/sources/meta-qt5/recipes-qt/qt5/
qtgraphicaleffects_5.1.1.bb, do_fetch) failed with exit code '1'
WARNING: Failed to fetch URL
http://download.qt-project.org/official_releases/qt/5.1/5.1.1/submodules/qtdeclarative-opensource-src-5.1.1.tar.xz,
attempting MIRRORS if available
ERROR: Fetcher failure: Fetch command failed with exit code 4, no output
ERROR: Function failed: Fetcher failure for URL: '
http://download.qt-project.org/official_releases/qt/5.1/5.1.1/submodules/qtdeclarative-opensource-src-5.1.1.tar.xz'.
Unable to fetch URL from any source.
ERROR: Logfile of failure stored in:
/home/minda/bin/fsl-community-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/qtdeclarative/5.1.1-r0/temp/log.do_fetch.29383
ERROR: Task 1270
(/home/minda/bin/fsl-community-bsp/sources/meta-qt5/recipes-qt/qt5/
qtdeclarative_5.1.1.bb, do_fetch) failed with exit code '1'
Please can anybody suggest.
--
Thanks
Nilesh Prakash Kokane
--
“The contents of this e-mail message and any attachments are confidential
and are intended solely for addressee. The information may also be legally
privileged. This transmission is sent in trust, for the sole purpose of
delivery to the intended recipient. If you have received this transmission
in error, any use, reproduction or dissemination of this transmission is
strictly prohibited. If you are not the intended recipient, please
immediately notify the sender by reply e-mail or phone and delete this
message and its attachments, if any.”
More information about the Openembedded-devel
mailing list