[oe] Yocto 1.7 building alsa-lib do_package fails

[Sven Ebenfeld]

Am 31.10.2014 16:06, schrieb Iorga, Cristian:
> Hi,
> 
> There might be something wrong with the target machine/processor architecture in your setup..
> 
> tmp-angstrom_v2014_12-glibc/work/-angstrom-linux-gnueabi/alsa-lib/1.0.28-r0/ looks strange;
> A common root cause will trigger the ipk/opkg error.
> 

You're right I didn't see that. This looks very strange.

> Please provide the necessary steps to reproduce the issue.

I wrote my own machine-configuration based on the wandboard-solo
configuration. I will try to find a way to reproduce this issue using a
standard machine configuration. This might even exclude errors in my own
configuration.

> 
> Regards,
> Cristian Iorga
> Yocto Project
> Intel Corporation
> 
> 
> -----Original Message-----
> From: openembedded-devel-bounces at lists.openembedded.org [mailto:openembedded-devel-bounces at lists.openembedded.org] On Behalf Of Sven Ebenfeld
> Sent: Friday, October 31, 2014 12:14 PM
> To: openembedded-devel at lists.openembedded.org
> Subject: [oe] Yocto 1.7 building alsa-lib do_package fails
> 
> Hi,
> 
> When I try to build alsa-lib on master branch of oe-core I get the following error:
> 
> ERROR: Function failed: opkg-build execution failed
> ERROR: Logfile of failure stored in:
> /media/bitbakeTmp/angstrom-dizzy/build/tmp-angstrom_v2014_12-glibc/work/-angstrom-linux-gnueabi/alsa-lib/1.0.28-r0/temp/log.do_package_write_ipk.29979
> Log data follows:
> | DEBUG: Executing python function sstate_task_prefunc
> | DEBUG: Python function sstate_task_prefunc finished
> | DEBUG: Executing python function do_package_write_ipk
> | DEBUG: Executing python function read_subpackage_metadata
> | DEBUG: Python function read_subpackage_metadata finished
> | DEBUG: Executing python function do_package_ipk
> | *** Error: CONTROL/control is missing field Architecture
> |
> | opkg-build: Please fix the above errors and try again.
> | DEBUG: Python function do_package_ipk finished
> | DEBUG: Python function do_package_write_ipk finished
> | ERROR: Function failed: opkg-build execution failed
> ERROR: Task 1625
> (/media/bitbakeTmp/angstrom-dizzy/sources/openembedded-core/meta/recipes-multimedia/alsa/alsa-lib_1.0.28.bb,
> do_package_write_ipk) failed with exit code '1'
> NOTE: Tasks Summary: Attempted 2214 tasks of which 15 didn't need to be rerun and 1 failed.
> 
> 
> I'm using Angstrom setup-scripts on branch angstrom-v2014.12-yocto1.7
> 
> Can anybody give me an advice where to look for the source of the problem?
> 
> Regards,
> Sven
> --
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel at lists.openembedded.org
> http://lists.openembedded.org/mailman/listinfo/openembedded-devel
>