[oe] [meta-oe][PATCH 6/7] libtdb: add new recipe
Bian, Naimeng
biannm at cn.fujitsu.com
Wed Jun 17 01:13:40 UTC 2015
Thanks for your test.
> -----Original Message-----
> From: openembedded-devel-bounces at lists.openembedded.org
> [mailto:openembedded-devel-bounces at lists.openembedded.org] On Behalf Of
> Martin Jansa
> Sent: Tuesday, June 16, 2015 7:44 PM
> To: openembedded-devel at lists.openembedded.org
> Subject: Re: [oe] [meta-oe][PATCH 6/7] libtdb: add new recipe
>
> On Mon, Jun 15, 2015 at 04:52:15PM +0800, Bian Naimeng wrote:
> > libtdb is required by samba4
>
> It conflicts with samba3, should we just replace samba_3* with samba_4?
>
Replacing samba_3* with samba_4 is good to me.
Thanks
Bian
> NOTE: recipe libtdb-1.3.0-r0: task do_populate_sysroot: Started
> ERROR: The recipe libtdb is trying to install files into a shared area when
> those files already exist. Those files and their manifest location are:
>
> /home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/qemuarm/pkgdata/runtime
> -rprovides/libtdb/libtdb
> Matched in manifest-qemuarm-samba.packagedata
>
> /home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/qemuarm/pkgdata/runtime
> -reverse/libtdb1
> Matched in manifest-qemuarm-samba.packagedata
>
> /home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/qemuarm/pkgdata/runtime
> /libtdb.packaged
> Matched in manifest-qemuarm-samba.packagedata
>
> /home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/qemuarm/pkgdata/runtime
> /libtdb
> Matched in manifest-qemuarm-samba.packagedata
>
> /home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/qemuarm/pkgdata/shlibs2
> /libtdb.list
> Matched in manifest-qemuarm-samba.packagedata
> Please verify which recipe should provide the above files.
> The build has stopped as continuing in this scenario WILL break things, if not
> now, possibly in the future (we've seen builds fail several months later). If
> the system knew how to recover from this automatically it would however there
> are several different scenarios which can result in this and we don't know which
> one this is. It may be you have switched providers of something like
> virtual/kernel (e.g. from linux-yocto to linux-yocto-dev), in that case you
> need to execute the clean task for both recipes and it will resolve this error.
> It may be you changed DISTRO_FEATURES from systemd to udev or vice versa.
> Cleaning those recipes should again resolve this error however switching
> DISTRO_FEATURES on an existing build directory is not supported, you should
> really clean out tmp and rebuild (reusing sstate should be safe). It could be
> the overlapping files detected are harmless in which case adding them to
> SSTATE_DUPWHITELIST may be the correct solution. It could also be your buil
> d is including two different conflicting versions of things (e.g. bluez 4 and
> bluez 5 and the correct solution for that would be to resolve the conflict.
> If in doubt, please ask on the mailing list, sharing the error and filelist
> above.
> ERROR: If the above message is too much, the simpler version is you're advised
> to wipe out tmp and rebuild (reusing sstate is fine). That will likely fix things
> in most (but not all) cases.
> ERROR: Function failed: sstate_task_postfunc
> ERROR: Logfile of failure stored in:
> /home/jenkins/oe/world/shr-core/tmp-glibc/work/armv5te-oe-linux-gnueabi/li
> btdb/1.3.0-r0/temp/log.do_packagedata.27608
> NOTE: recipe libtdb-1.3.0-r0: task do_packagedata: Failed
> ERROR: Task 27734
> (/home/jenkins/oe/world/shr-core/meta-openembedded/meta-oe/recipes-support
> /libtdb/libtdb_1.3.0.bb, do_packagedata) failed with exit code '1'
> NOTE: Running task 20344 of 31972 (ID: 27663,
> /home/jenkins/oe/world/shr-core/meta-openembedded/meta-gnome/recipes-gnome
> /evince/evince_2.32.0.bb, do_package)
> ERROR: The recipe libtdb is trying to install files into a shared area when
> those files already exist. Those files and their manifest location are:
>
> /home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/qemuarm/usr/lib/libtdb.
> so.1
> Matched in manifest-qemuarm-samba.populate_sysroot
>
> /home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/qemuarm/usr/lib/libtdb.
> so
> Matched in manifest-qemuarm-samba.populate_sysroot
>
> /home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/qemuarm/usr/lib/pkgconf
> ig/tdb.pc
> Matched in manifest-qemuarm-samba.populate_sysroot
>
> /home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/qemuarm/usr/include/tdb
> .h
> Matched in manifest-qemuarm-samba.populate_sysroot
> Please verify which recipe should provide the above files.
> The build has stopped as continuing in this scenario WILL break things, if not
> now, possibly in the future (we've seen builds fail several months later). If
> the system knew how to recover from this automatically it would however there
> are several different scenarios which can result in this and we don't know which
> one this is. It may be you have switched providers of something like
> virtual/kernel (e.g. from linux-yocto to linux-yocto-dev), in that case you
> need to execute the clean task for both recipes and it will resolve this error.
> It may be you changed DISTRO_FEATURES from systemd to udev or vice versa.
> Cleaning those recipes should again resolve this error however switching
> DISTRO_FEATURES on an existing build directory is not supported, you should
> really clean out tmp and rebuild (reusing sstate should be safe). It could be
> the overlapping files detected are harmless in which case adding them to
> SSTATE_DUPWHITELIST may be the correct solution. It could also be your buil
> d is including two different conflicting versions of things (e.g. bluez 4 and
> bluez 5 and the correct solution for that would be to resolve the conflict.
> If in doubt, please ask on the mailing list, sharing the error and filelist
> above.
> ERROR: If the above message is too much, the simpler version is you're advised
> to wipe out tmp and rebuild (reusing sstate is fine). That will likely fix things
> in most (but not all) cases.
> ERROR: Function failed: sstate_task_postfunc
> ERROR: Logfile of failure stored in:
> /home/jenkins/oe/world/shr-core/tmp-glibc/work/armv5te-oe-linux-gnueabi/li
> btdb/1.3.0-r0/temp/log.do_populate_sysroot.27647
> NOTE: recipe libtdb-1.3.0-r0: task do_populate_sysroot: Failed
> ERROR: Task 27729
> (/home/jenkins/oe/world/shr-core/meta-openembedded/meta-oe/recipes-support
> /libtdb/libtdb_1.3.0.bb, do_populate_sysroot) failed with exit code '1'
>
> >
> > Signed-off-by: Bian Naimeng <biannm at cn.fujitsu.com>
> > ---
> > .../libtdb/do-not-check-xsltproc-manpages.patch | 15 +++++++++++
> > meta-oe/recipes-support/libtdb/libtdb_1.3.0.bb | 30
> ++++++++++++++++++++++
> > 2 files changed, 45 insertions(+)
> > create mode 100644
> > meta-oe/recipes-support/libtdb/libtdb/do-not-check-xsltproc-manpages.p
> > atch create mode 100644
> > meta-oe/recipes-support/libtdb/libtdb_1.3.0.bb
> >
> > diff --git
> > a/meta-oe/recipes-support/libtdb/libtdb/do-not-check-xsltproc-manpages
> > .patch
> > b/meta-oe/recipes-support/libtdb/libtdb/do-not-check-xsltproc-manpages
> > .patch
> > new file mode 100644
> > index 0000000..bcc45c9
> > --- /dev/null
> > +++ b/meta-oe/recipes-support/libtdb/libtdb/do-not-check-xsltproc-manp
> > +++ ages.patch
> > @@ -0,0 +1,15 @@
> > +Don't check manpages for xsltproc.
> > +
> > +Signed-off-by: Bian Naimeng <biannm at cn.fujitsu.com>
> > +
> > +--- tdb-1.3.0.orig/wscript 2015-04-22 09:52:32.366000222 +0900
> > ++++ tdb-1.3.0/wscript 2015-04-22 09:51:57.720000205 +0900
> > +@@ -90,7 +90,7 @@ def configure(conf):
> > + not conf.env.disable_tdb_mutex_locking):
> > + conf.define('USE_TDB_MUTEX_LOCKING', 1)
> > +
> > +- conf.CHECK_XSLTPROC_MANPAGES()
> > ++ conf.find_program('xsltproc', var='XSLTPROC')
> > +
> > + if not conf.env.disable_python:
> > + # also disable if we don't have the python libs installed
> > diff --git a/meta-oe/recipes-support/libtdb/libtdb_1.3.0.bb
> > b/meta-oe/recipes-support/libtdb/libtdb_1.3.0.bb
> > new file mode 100644
> > index 0000000..b7f3d21
> > --- /dev/null
> > +++ b/meta-oe/recipes-support/libtdb/libtdb_1.3.0.bb
> > @@ -0,0 +1,30 @@
> > +SUMMARY = "The tdb library"
> > +SECTION = "libs"
> > +LICENSE = "LGPL-3.0+ & GPL-3.0+"
> > +
> > +LIC_FILES_CHKSUM =
> "file://${COREBASE}/meta/files/common-licenses/LGPL-3.0;md5=bfccfe952269ff
> f2b407dd11f2f3083b \
> > +
> file://${COREBASE}/meta/files/common-licenses/GPL-3.0;md5=c79ff39f19dfec6d
> 293b95dea7b07891"
> > +
> > +SRC_URI = "http://samba.org/ftp/tdb/tdb-${PV}.tar.gz \
> > + file://do-not-check-xsltproc-manpages.patch"
> > +
> > +SRC_URI[md5sum] = "f18cd6afc4f5670edfe58f72d2665f94"
> > +SRC_URI[sha256sum] =
> "04bee48d405ab7815810575a6e0cb364cc0eea6187b54b18c84e9c18a768ba20"
> > +
> > +S = "${WORKDIR}/tdb-${PV}"
> > +
> > +inherit wafsamba
> > +
> > +EXTRA_OECONF += "--disable-rpath \
> > + --bundled-libraries=NONE \
> > + --builtin-libraries=replace \
> > + --with-libiconv=${STAGING_DIR_HOST}${prefix}\
> > + "
> > +
> > +PACKAGES += "tdb-tools python-tdb python-tdb-dbg"
> > +
> > +FILES_${PN} = "${libdir}/*.so.*"
> > +FILES_tdb-tools = "${bindir}/*"
> > +FILES_python-tdb =
> "${libdir}/python${PYTHON_BASEVERSION}/site-packages/*"
> > +FILES_python-tdb-dbg =
> "${libdir}/python${PYTHON_BASEVERSION}/site-packages/.debug/*"
> > +RDEPENDS_python-tdb = "python"
> > --
> > 1.8.4.2
> >
> > --
> > _______________________________________________
> > Openembedded-devel mailing list
> > Openembedded-devel at lists.openembedded.org
> > http://lists.openembedded.org/mailman/listinfo/openembedded-devel
>
> --
> Martin 'JaMa' Jansa jabber: Martin.Jansa at gmail.com
> --
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel at lists.openembedded.org
> http://lists.openembedded.org/mailman/listinfo/openembedded-devel
More information about the Openembedded-devel
mailing list