[oe] [meta-networking][PATCH] whireshark: update to 12.5
Martin Jansa
martin.jansa at gmail.com
Sun May 17 07:55:25 UTC 2015
On Fri, May 15, 2015 at 01:27:20PM -0700, Armin Kuster wrote:
> fixed broken url and cleaned up the PACKAGECONFIG
> removed patch as it is included in this release
> update SECTION name
>
> The following vulnerabilities have been fixed.
> * [1]wnpa-sec-2015-12
> The LBMR dissector could go into an infinite loop. ([2]Bug 11036)
> [3]CVE-2015-3808 [4]CVE-2015-3809
>
> * [5]wnpa-sec-2015-13
> The WebSocket dissector could recurse excessively. ([6]Bug 10989)
> [7]CVE-2015-3810
>
> * [8]wnpa-sec-2015-14
> The WCP dissector could crash while decompressing data. ([9]Bug
> 10978) [10]CVE-2015-3811
>
> * [11]wnpa-sec-2015-15
> The X11 dissector could leak memory. ([12]Bug 11088)
> [13]CVE-2015-3812
>
> * [14]wnpa-sec-2015-16
> The packet reassembly code could leak memory. ([15]Bug 11129)
> [16]CVE-2015-3813
>
> * [17]wnpa-sec-2015-17
> The IEEE 802.11 dissector could go into an infinite loop. ([18]Bug
> 11110) [19]CVE-2015-3814
>
> * [20]wnpa-sec-2015-18
> The Android Logcat file parser could crash. Discovered by Hanno
> Böck. ([21]Bug 11188) [22]CVE-2015-3815
>
> Signed-off-by: Armin Kuster <akuster808 at gmail.com>
> ---
> .../{wireshark_1.12.4.bb => wireshark_1.12.5.bb} | 26 ++++++++++------------
> 1 file changed, 12 insertions(+), 14 deletions(-)
> rename meta-networking/recipes-support/wireshark/{wireshark_1.12.4.bb => wireshark_1.12.5.bb} (65%)
>
> diff --git a/meta-networking/recipes-support/wireshark/wireshark_1.12.4.bb b/meta-networking/recipes-support/wireshark/wireshark_1.12.5.bb
> similarity index 65%
> rename from meta-networking/recipes-support/wireshark/wireshark_1.12.4.bb
> rename to meta-networking/recipes-support/wireshark/wireshark_1.12.5.bb
> index 6833216..21a7ce9 100644
> --- a/meta-networking/recipes-support/wireshark/wireshark_1.12.4.bb
> +++ b/meta-networking/recipes-support/wireshark/wireshark_1.12.5.bb
> @@ -1,20 +1,17 @@
> DESCRIPTION = "wireshark - a popular network protocol analyzer"
> HOMEPAGE = "http://www.wireshark.org"
> -SECTION = "network"
> +SECTION = "net"
> LICENSE = "GPL-2.0"
> LIC_FILES_CHKSUM = "file://README.linux;md5=631e077455b7972172eb149195e065b0"
>
> DEPENDS = "perl-native pcre expat glib-2.0 sbc"
>
> -SRC_URI = " \
> - http://wiresharkdownloads.riverbed.com/wireshark/src/wireshark-${PV}.tar.bz2 \
> - file://Do-not-set-CC_FOR_BUILD-flags.patch \
> -"
> +SRC_URI = "https://2.na.dl.wireshark.org/src/wireshark-${PV}.tar.bz2"
>
> PE = "1"
>
> -SRC_URI[md5sum] = "acfa156fd35cb66c867b1ace992e4b5b"
> -SRC_URI[sha256sum] = "de804e98e252e4b795d28d6ac2d48d7f5aacd9b046ee44d44266983795ebc312"
> +SRC_URI[md5sum] = "9ee199dde4f36a3d71f7b81dd6764e93"
> +SRC_URI[sha256sum] = "d0f177b2ef49e4deae4ff7d3299bdd295ba558a3934ce8ae489b2f13927cbd82"
>
> inherit autotools pkgconfig
>
> @@ -23,14 +20,15 @@ ARM_INSTRUCTION_SET = "arm"
> # Works with either gtk+ or gtk3.
> WHICH_GTK = "gtk3"
>
> -PACKAGECONFIG ??= "libcap gnutls libnl"
> +PACKAGECONFIG ?= "libpcap gnutls libnl libcap"
> PACKAGECONFIG += " ${@bb.utils.contains("DISTRO_FEATURES", "x11", "${WHICH_GTK} graphics", "", d)}"
> PACKAGECONFIG += " ${@bb.utils.contains("DISTRO_FEATURES", "ipv6", "ipv6", "", d)}"
>
> -PACKAGECONFIG[libcap] = "--with-libcap=${STAGING_DIR_HOST}, --with-libcap=no, libcap"
> -PACKAGECONFIG[libsmi] = "--with-libsmi=yes, --with-libsmi=no, libsmi"
> -PACKAGECONFIG[libnl] = "--with-libnl=yes, --with-libnl=no, libnl"
> -PACKAGECONFIG[portaudio] = "--with-portaudio=yes, --with-portaudio=no, portaudio-v19"
> +PACKAGECONFIG[libcap] = " --with-libcap=${STAGING_LIBDIR}, --with-libcap=no --enable-pcap-ng-default , libcap"
> +PACKAGECONFIG[libpcap] = " --with-pcap=${STAGING_LIBDIR} --with-pcap-remote, --with-pcap=no --enable-pcap-ng-default , libpcap"
> +PACKAGECONFIG[libsmi] = " --with-libsmi=yes, --with-libsmi=no, libsmi"
> +PACKAGECONFIG[libnl] = " --with-libnl=yes, --with-libnl=no, libnl"
> +PACKAGECONFIG[portaudio] = " --with-portaudio=yes, --with-portaudio=no, portaudio-v19"
Why do you add leading space before first --with?
> PACKAGECONFIG[gtk2] = "--with-gtk2=yes, --with-gtk2=no, gtk+"
> PACKAGECONFIG[gtk3] = "--with-gtk3=yes, --with-gtk3=no, gtk+3"
> PACKAGECONFIG[graphics] = "--enable-wireshark, --disable-wireshark,"
> @@ -39,14 +37,14 @@ PACKAGECONFIG[gnutls] = "--with-gnutls=yes, --with-gnutls=no, gnutls"
> PACKAGECONFIG[gcrypt] = "--with-gcrypt=yes, --with-gcrypt=no, libgcrypt"
> PACKAGECONFIG[krb5] = "--with-krb5=yes, --with-krb5=no, krb5"
> PACKAGECONFIG[lua] = "--with-lua=yes, --with-lua=no, lua"
> -PACKAGECONFIG[zlib] = "--with-zlib=yes, --with-zlib=no, zlib"
> +PACKAGECONFIG[zlib] = " -with-zlib=yes, --with-zlib=no, zlib"
This doesn't look correct
I've removed leading spaces before --with and added - here when
cherry-picking to master-next (if you agree you don't need to resend).
> PACKAGECONFIG[geoip] = "--with-geoip=yes, --with-geoip=no, geoip"
>
> # these next two options require addional layers
> PACKAGECONFIG[adns] = "--with-adns=yes, --with-adns=no, adns"
> PACKAGECONFIG[c-ares] = "--with-c-ares=yes, --with-c-ares=no, c-ares"
>
> -EXTRA_OECONF += "--with-qt=no --enable-usr-local=no --enable-tshark --with-pcap=no --enable-pcap-ng-default"
> +EXTRA_OECONF += "--with-qt=no --enable-usr-local=no --enable-tshark --enable-rawshark"
>
> do_configure_prepend() {
> # force to use fallback
> --
> 2.3.5
>
> --
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel at lists.openembedded.org
> http://lists.openembedded.org/mailman/listinfo/openembedded-devel
--
Martin 'JaMa' Jansa jabber: Martin.Jansa at gmail.com
More information about the Openembedded-devel
mailing list