[oe] kernel not booting if build with gcc-5.2.0

[Steffen Sledz]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

While switching from fido to jethro we hit the next problem. :(

For one of our machines (based on Marvell Kirkwood, very similar to OpenRD) the kernel build with the preferred gcc-5.2.0 does not boot. Immediately after the kernel is started from u-boot the system freezes. The last output on the console is "Starting kernel ...".

If we build with the also available gcc-4.9.3 the kernel boots fine.

The kernel version is the one siggested by jethro:

 SRC_URI = " git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git;protocol=git;nocheckout=1;name=machine \
 ...
 LINUX_VERSION ?= "4.2"
 LINUX_VERSION_EXTENSION_append = "-hikirk"
 ...
 SRCREV_machine="64291f7db5bd8150a74ad2036f1037e6a0428df2"

Any suggestions?

Regards,
Steffen

- -- 
DResearch Fahrzeugelektronik GmbH
Otto-Schmirgal-Str. 3, 10319 Berlin, Germany
Tel: +49 30 515932-237 mailto:sledz at dresearch-fe.de
Fax: +49 30 515932-299
Geschäftsführer: Dr. Michael Weber, Werner Mögle;
Amtsgericht Berlin Charlottenburg; HRB 130120 B;
Ust.-IDNr. DE273952058
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2

iQIcBAEBAgAGBQJWuGyJAAoJEIz5slJ1krPh1pUP/RtqrOY8EIjpksnpOuF4hecR
fyigic5MN4D+/n4meRUOXYOGZHvBSWIQXLYvfooCTAMYaQS+J96B+2ZCVkv52AI6
NyGGdUJ065+yPt3obgOBP2/yJXsvJWPmlIa6SZDawwXnsr2hJZE2wrCpDWeVXvyy
LnhykrkCcblTvHH2nWkK+Tym1uOAfNrU8bqptm66jrSKg/9gysSicwamzyAeofrU
K+gizGKa4mj54QeINvGKwVWOzSWPNBuAszfnnDwcg9Cpc1GZpjc511oUBMO2xCqH
Sub8D0yBtGreokfYDl5FDlT+7n1qtpliZ7ZFZH0TZqWazA021u0nZ/UWHQe3UtOI
uaswhTdRQqL+okqKqrIAvcTuFcCZxBVd8orz7wEm/3huTAWIWQplyPWSOXjeK9es
MbkO/daNLsRzF/PJgX+zF5mk1F06o/zYwXRzWboNMPeir3ehet2N1CUKLJVbKMW3
cDvYXEtvYwXe8JtYPxQUN4ceruxqvrLVdZMhViIiVOXqGmRsXPsPKQIE9qXIa4gY
GTY/n7FSHThf1q3j3cTu+p2AWpGgYzaaZ/i4mFK72Sn0FHZZGPEtB6/QvvFEORLn
7Dfm3YThf4od6V1T1JVDQKwRIXeGjXRNb27bWyWIOhkLx+mfh3Y9HaCXfIeXsyk+
5AkiQRfKR/O29IePx0a0
=J9ka
-----END PGP SIGNATURE-----