[oe] [meta-oe][PATCH 2/2] android-tools: Fix build with musl

Khem Raj raj.khem at gmail.com
Sat Sep 16 15:07:01 UTC 2017


On Sat, Sep 16, 2017 at 7:42 AM, Martin Jansa <martin.jansa at gmail.com> wrote:
> I don't know if this version (moved from meta-android to meta-oe) ever built
> OK for qemuarm, I was always building the version from meta-android which
> built OK.

it was building 4.2.2 version and I am guessing it probably did not
using atomics back then. Can we try to use ARM_INSTRUCTION_SET = "arm"
on armv5 and see if it work ? It works ok for thumb2

>
> On Sat, Sep 16, 2017 at 4:30 PM, Khem Raj <raj.khem at gmail.com> wrote:
>>
>> On Sat, Sep 16, 2017 at 5:37 AM, Martin Jansa <martin.jansa at gmail.com>
>> wrote:
>> > Even without this patch android-tools fail to build for qemuarm:
>> > http://errors.yoctoproject.org/Errors/Details/156104/
>> >
>> > It's probably broken for long time, the recipe was shadowed by
>> > meta-android
>> > copy until recently when I've removed it from meta-android (and then the
>> > layer as well from world builds).
>> >
>> > Can you please check what's going on so that I can at least build test
>> > this
>> > properly?
>> >
>>
>>
>> it build ok for armv7(rpi3)  its using armv6+ instructions for atomics
>> which wont work for qemuarm, did it build on qemuarm ever before ?
>>
>> /tmp/cc7WvkQH.s: Assembler messages:
>> /tmp/cc7WvkQH.s:159: Error: selected processor does not support `ldrex
>> ip,[r3]' in ARM mode
>> /tmp/cc7WvkQH.s:162: Error: selected processor does not support
>> `strexeq r4,r1,[r3]' in ARM mode
>> /tmp/cc7WvkQH.s:262: Error: selected processor does not support `ldrex
>> ip,[r3]' in ARM mode
>> /tmp/cc7WvkQH.s:264: Error: selected processor does not support `strex
>> r4,r0,[r3]' in ARM mode
>> /tmp/cc7WvkQH.s:351: Error: selected processor does not support `ldrex
>> ip,[r3]' in ARM mode
>> /tmp/cc7WvkQH.s:353: Error: selected processor does not support `strex
>> r4,r0,[r3]' in ARM mode
>> /tmp/cc7WvkQH.s:396: Error: selected processor does not support `ldrex
>> ip,[r3]' in ARM mode
>> /tmp/cc7WvkQH.s:398: Error: selected processor does not support `strex
>> r4,r0,[r3]' in ARM mode
>> <builtin>: recipe for target 'atomic.o' failed
>>
>>
>>
>> > On Sat, Sep 16, 2017 at 12:58 AM, Khem Raj <raj.khem at gmail.com> wrote:
>> >>
>> >> Signed-off-by: Khem Raj <raj.khem at gmail.com>
>> >> ---
>> >>  .../0001-add-base64-implementation.patch           | 351
>> >> +++++++++++++++++++++
>> >>  .../android-tools/0002-adb-Musl-fixes.patch        | 134 ++++++++
>> >>  .../android-tools/android-tools/adbd.mk            |   1 +
>> >>  .../android-tools/android-tools_5.1.1.r37.bb       |   2 +
>> >>  4 files changed, 488 insertions(+)
>> >>  create mode 100644
>> >>
>> >> meta-oe/recipes-devtools/android-tools/android-tools/0001-add-base64-implementation.patch
>> >>  create mode 100644
>> >>
>> >> meta-oe/recipes-devtools/android-tools/android-tools/0002-adb-Musl-fixes.patch
>> >>
>> >> diff --git
>> >>
>> >> a/meta-oe/recipes-devtools/android-tools/android-tools/0001-add-base64-implementation.patch
>> >>
>> >> b/meta-oe/recipes-devtools/android-tools/android-tools/0001-add-base64-implementation.patch
>> >> new file mode 100644
>> >> index 000000000..680d21f3a
>> >> --- /dev/null
>> >> +++
>> >>
>> >> b/meta-oe/recipes-devtools/android-tools/android-tools/0001-add-base64-implementation.patch
>> >> @@ -0,0 +1,351 @@
>> >> +From bbeb72f11c64f190b23abbed5f44311bd021bdc9 Mon Sep 17 00:00:00 2001
>> >> +From: Khem Raj <raj.khem at gmail.com>
>> >> +Date: Fri, 15 Sep 2017 15:46:38 -0700
>> >> +Subject: [PATCH 1/2] add base64 implementation
>> >> +
>> >> +musl needs it
>> >> +
>> >> +Signed-off-by: Khem Raj <raj.khem at gmail.com>
>> >> +---
>> >> + system/core/adb/adb_auth_client.c |   2 +-
>> >> + system/core/adb/base64.c          | 315
>> >> ++++++++++++++++++++++++++++++++++++++
>> >> + 2 files changed, 316 insertions(+), 1 deletion(-)
>> >> + create mode 100644 system/core/adb/base64.c
>> >> +
>> >> +diff --git a/system/core/adb/adb_auth_client.c
>> >> b/system/core/adb/adb_auth_client.c
>> >> +index 55e9dca..104b413 100644
>> >> +--- a/system/core/adb/adb_auth_client.c
>> >> ++++ b/system/core/adb/adb_auth_client.c
>> >> +@@ -75,7 +75,7 @@ static void read_keys(const char *file, struct
>> >> listnode
>> >> *list)
>> >> +         if (sep)
>> >> +             *sep = '\0';
>> >> +
>> >> +-        ret = __b64_pton(buf, (u_char *)&key->key, sizeof(key->key) +
>> >> 4);
>> >> ++        ret = b64_pton(buf, (u_char *)&key->key, sizeof(key->key) +
>> >> 4);
>> >> +         if (ret != sizeof(key->key)) {
>> >> +             D("%s: Invalid base64 data ret=%d\n", file, ret);
>> >> +             free(key);
>> >> +diff --git a/system/core/adb/base64.c b/system/core/adb/base64.c
>> >> +new file mode 100644
>> >> +index 0000000..95da284
>> >> +--- /dev/null
>> >> ++++ b/system/core/adb/base64.c
>> >> +@@ -0,0 +1,315 @@
>> >> ++/*
>> >> ++ * Copyright (c) 1996-1999 by Internet Software Consortium.
>> >> ++ *
>> >> ++ * Permission to use, copy, modify, and distribute this software for
>> >> any
>> >> ++ * purpose with or without fee is hereby granted, provided that the
>> >> above
>> >> ++ * copyright notice and this permission notice appear in all copies.
>> >> ++ *
>> >> ++ * THE SOFTWARE IS PROVIDED "AS IS" AND INTERNET SOFTWARE CONSORTIUM
>> >> DISCLAIMS
>> >> ++ * ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
>> >> WARRANTIES
>> >> ++ * OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL INTERNET
>> >> SOFTWARE
>> >> ++ * CONSORTIUM BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR
>> >> CONSEQUENTIAL
>> >> ++ * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA
>> >> OR
>> >> ++ * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
>> >> TORTIOUS
>> >> ++ * ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
>> >> PERFORMANCE
>> >> OF THIS
>> >> ++ * SOFTWARE.
>> >> ++ */
>> >> ++
>> >> ++/*
>> >> ++ * Portions Copyright (c) 1995 by International Business Machines,
>> >> Inc.
>> >> ++ *
>> >> ++ * International Business Machines, Inc. (hereinafter called IBM)
>> >> grants
>> >> ++ * permission under its copyrights to use, copy, modify, and
>> >> distribute
>> >> this
>> >> ++ * Software with or without fee, provided that the above copyright
>> >> notice and
>> >> ++ * all paragraphs of this notice appear in all copies, and that the
>> >> name
>> >> of IBM
>> >> ++ * not be used in connection with the marketing of any product
>> >> incorporating
>> >> ++ * the Software or modifications thereof, without specific, written
>> >> prior
>> >> ++ * permission.
>> >> ++ *
>> >> ++ * To the extent it has a right to do so, IBM grants an immunity from
>> >> suit
>> >> ++ * under its patents, if any, for the use, sale or manufacture of
>> >> products to
>> >> ++ * the extent that such products are used for performing Domain Name
>> >> System
>> >> ++ * dynamic updates in TCP/IP networks by means of the Software.  No
>> >> immunity is
>> >> ++ * granted for any product per se or for any other function of any
>> >> product.
>> >> ++ *
>> >> ++ * THE SOFTWARE IS PROVIDED "AS IS", AND IBM DISCLAIMS ALL
>> >> WARRANTIES,
>> >> ++ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
>> >> FOR A
>> >> ++ * PARTICULAR PURPOSE.  IN NO EVENT SHALL IBM BE LIABLE FOR ANY
>> >> SPECIAL,
>> >> ++ * DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
>> >> WHATSOEVER
>> >> ARISING
>> >> ++ * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
>> >> SOFTWARE,
>> >> EVEN
>> >> ++ * IF IBM IS APPRISED OF THE POSSIBILITY OF SUCH DAMAGES.
>> >> ++ */
>> >> ++
>> >> ++#if !defined(LINT) && !defined(CODECENTER)
>> >> ++static const char rcsid[] = "$BINDId: base64.c,v 8.7 1999/10/13
>> >> 16:39:33
>> >> vixie Exp $";
>> >> ++#endif /* not lint */
>> >> ++
>> >> ++#include <sys/types.h>
>> >> ++#include <sys/param.h>
>> >> ++#include <sys/socket.h>
>> >> ++
>> >> ++#include <netinet/in.h>
>> >> ++#include <arpa/inet.h>
>> >> ++#include <arpa/nameser.h>
>> >> ++
>> >> ++#include <ctype.h>
>> >> ++#include <resolv.h>
>> >> ++#include <stdio.h>
>> >> ++#include <stdlib.h>
>> >> ++#include <stdint.h>
>> >> ++#include <string.h>
>> >> ++
>> >> ++#define Assert(Cond) if (!(Cond)) abort()
>> >> ++
>> >> ++static const char Base64[] =
>> >> ++
>> >> "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/";
>> >> ++static const char Pad64 = '=';
>> >> ++
>> >> ++/* (From RFC1521 and draft-ietf-dnssec-secext-03.txt)
>> >> ++   The following encoding technique is taken from RFC 1521 by
>> >> Borenstein
>> >> ++   and Freed.  It is reproduced here in a slightly edited form for
>> >> ++   convenience.
>> >> ++
>> >> ++   A 65-character subset of US-ASCII is used, enabling 6 bits to be
>> >> ++   represented per printable character. (The extra 65th character,
>> >> "=",
>> >> ++   is used to signify a special processing function.)
>> >> ++
>> >> ++   The encoding process represents 24-bit groups of input bits as
>> >> output
>> >> ++   strings of 4 encoded characters. Proceeding from left to right, a
>> >> ++   24-bit input group is formed by concatenating 3 8-bit input
>> >> groups.
>> >> ++   These 24 bits are then treated as 4 concatenated 6-bit groups,
>> >> each
>> >> ++   of which is translated into a single digit in the base64 alphabet.
>> >> ++
>> >> ++   Each 6-bit group is used as an index into an array of 64 printable
>> >> ++   characters. The character referenced by the index is placed in the
>> >> ++   output string.
>> >> ++
>> >> ++                         Table 1: The Base64 Alphabet
>> >> ++
>> >> ++      Value Encoding  Value Encoding  Value Encoding  Value Encoding
>> >> ++          0 A            17 R            34 i            51 z
>> >> ++          1 B            18 S            35 j            52 0
>> >> ++          2 C            19 T            36 k            53 1
>> >> ++          3 D            20 U            37 l            54 2
>> >> ++          4 E            21 V            38 m            55 3
>> >> ++          5 F            22 W            39 n            56 4
>> >> ++          6 G            23 X            40 o            57 5
>> >> ++          7 H            24 Y            41 p            58 6
>> >> ++          8 I            25 Z            42 q            59 7
>> >> ++          9 J            26 a            43 r            60 8
>> >> ++         10 K            27 b            44 s            61 9
>> >> ++         11 L            28 c            45 t            62 +
>> >> ++         12 M            29 d            46 u            63 /
>> >> ++         13 N            30 e            47 v
>> >> ++         14 O            31 f            48 w         (pad) =
>> >> ++         15 P            32 g            49 x
>> >> ++         16 Q            33 h            50 y
>> >> ++
>> >> ++   Special processing is performed if fewer than 24 bits are
>> >> available
>> >> ++   at the end of the data being encoded.  A full encoding quantum is
>> >> ++   always completed at the end of a quantity.  When fewer than 24
>> >> input
>> >> ++   bits are available in an input group, zero bits are added (on the
>> >> ++   right) to form an integral number of 6-bit groups.  Padding at the
>> >> ++   end of the data is performed using the '=' character.
>> >> ++
>> >> ++   Since all base64 input is an integral number of octets, only the
>> >> ++         -------------------------------------------------
>> >> ++   following cases can arise:
>> >> ++
>> >> ++       (1) the final quantum of encoding input is an integral
>> >> ++           multiple of 24 bits; here, the final unit of encoded
>> >> ++         output will be an integral multiple of 4 characters
>> >> ++         with no "=" padding,
>> >> ++       (2) the final quantum of encoding input is exactly 8 bits;
>> >> ++           here, the final unit of encoded output will be two
>> >> ++         characters followed by two "=" padding characters, or
>> >> ++       (3) the final quantum of encoding input is exactly 16 bits;
>> >> ++           here, the final unit of encoded output will be three
>> >> ++         characters followed by one "=" padding character.
>> >> ++   */
>> >> ++
>> >> ++int
>> >> ++b64_ntop(const uint8_t* src, size_t srclength, char* target, size_t
>> >> targsize)
>> >> ++{
>> >> ++      size_t datalength = 0;
>> >> ++      uint8_t input[3];
>> >> ++      uint8_t output[4];
>> >> ++      size_t i;
>> >> ++
>> >> ++      while (2 < srclength) {
>> >> ++              input[0] = *src++;
>> >> ++              input[1] = *src++;
>> >> ++              input[2] = *src++;
>> >> ++              srclength -= 3;
>> >> ++
>> >> ++              output[0] = input[0] >> 2;
>> >> ++              output[1] = ((input[0] & 0x03) << 4) + (input[1] >> 4);
>> >> ++              output[2] = ((input[1] & 0x0f) << 2) + (input[2] >> 6);
>> >> ++              output[3] = input[2] & 0x3f;
>> >> ++              Assert(output[0] < 64);
>> >> ++              Assert(output[1] < 64);
>> >> ++              Assert(output[2] < 64);
>> >> ++              Assert(output[3] < 64);
>> >> ++
>> >> ++              if (datalength + 4 > targsize)
>> >> ++                      return (-1);
>> >> ++              target[datalength++] = Base64[output[0]];
>> >> ++              target[datalength++] = Base64[output[1]];
>> >> ++              target[datalength++] = Base64[output[2]];
>> >> ++              target[datalength++] = Base64[output[3]];
>> >> ++      }
>> >> ++
>> >> ++      /* Now we worry about padding. */
>> >> ++      if (0 != srclength) {
>> >> ++              /* Get what's left. */
>> >> ++              input[0] = input[1] = input[2] = '\0';
>> >> ++              for (i = 0; i < srclength; i++)
>> >> ++                      input[i] = *src++;
>> >> ++
>> >> ++              output[0] = input[0] >> 2;
>> >> ++              output[1] = ((input[0] & 0x03) << 4) + (input[1] >> 4);
>> >> ++              output[2] = ((input[1] & 0x0f) << 2) + (input[2] >> 6);
>> >> ++              Assert(output[0] < 64);
>> >> ++              Assert(output[1] < 64);
>> >> ++              Assert(output[2] < 64);
>> >> ++
>> >> ++              if (datalength + 4 > targsize)
>> >> ++                      return (-1);
>> >> ++              target[datalength++] = Base64[output[0]];
>> >> ++              target[datalength++] = Base64[output[1]];
>> >> ++              if (srclength == 1)
>> >> ++                      target[datalength++] = Pad64;
>> >> ++              else
>> >> ++                      target[datalength++] = Base64[output[2]];
>> >> ++              target[datalength++] = Pad64;
>> >> ++      }
>> >> ++      if (datalength >= targsize)
>> >> ++              return (-1);
>> >> ++      target[datalength] = '\0';      /* Returned value doesn't count
>> >> \0. */
>> >> ++      return (datalength);
>> >> ++}
>> >> ++
>> >> ++/* skips all whitespace anywhere.
>> >> ++   converts characters, four at a time, starting at (or after)
>> >> ++   src from base - 64 numbers into three 8 bit bytes in the target
>> >> area.
>> >> ++   it returns the number of data bytes stored at the target, or -1 on
>> >> error.
>> >> ++ */
>> >> ++
>> >> ++int b64_pton(const char* src, uint8_t* target, size_t targsize)
>> >> ++{
>> >> ++      int tarindex, state, ch;
>> >> ++      char *pos;
>> >> ++
>> >> ++      state = 0;
>> >> ++      tarindex = 0;
>> >> ++
>> >> ++      while ((ch = *src++) != '\0') {
>> >> ++              if (isspace(ch))        /* Skip whitespace anywhere. */
>> >> ++                      continue;
>> >> ++
>> >> ++              if (ch == Pad64)
>> >> ++                      break;
>> >> ++
>> >> ++              pos = strchr(Base64, ch);
>> >> ++              if (pos == 0)           /* A non-base64 character. */
>> >> ++                      return (-1);
>> >> ++
>> >> ++              switch (state) {
>> >> ++              case 0:
>> >> ++                      if (target) {
>> >> ++                              if ((size_t)tarindex >= targsize)
>> >> ++                                      return (-1);
>> >> ++                              target[tarindex] = (pos - Base64) << 2;
>> >> ++                      }
>> >> ++                      state = 1;
>> >> ++                      break;
>> >> ++              case 1:
>> >> ++                      if (target) {
>> >> ++                              if ((size_t)tarindex + 1 >= targsize)
>> >> ++                                      return (-1);
>> >> ++                              target[tarindex]   |=  (pos - Base64)
>> >> >>
>> >> 4;
>> >> ++                              target[tarindex+1]  = ((pos - Base64) &
>> >> 0x0f)
>> >> ++                                                      << 4 ;
>> >> ++                      }
>> >> ++                      tarindex++;
>> >> ++                      state = 2;
>> >> ++                      break;
>> >> ++              case 2:
>> >> ++                      if (target) {
>> >> ++                              if ((size_t)tarindex + 1 >= targsize)
>> >> ++                                      return (-1);
>> >> ++                              target[tarindex]   |=  (pos - Base64)
>> >> >>
>> >> 2;
>> >> ++                              target[tarindex+1]  = ((pos - Base64) &
>> >> 0x03)
>> >> ++                                                      << 6;
>> >> ++                      }
>> >> ++                      tarindex++;
>> >> ++                      state = 3;
>> >> ++                      break;
>> >> ++              case 3:
>> >> ++                      if (target) {
>> >> ++                              if ((size_t)tarindex >= targsize)
>> >> ++                                      return (-1);
>> >> ++                              target[tarindex] |= (pos - Base64);
>> >> ++                      }
>> >> ++                      tarindex++;
>> >> ++                      state = 0;
>> >> ++                      break;
>> >> ++              default:
>> >> ++                      abort();
>> >> ++              }
>> >> ++      }
>> >> ++
>> >> ++      /*
>> >> ++       * We are done decoding Base-64 chars.  Let's see if we ended
>> >> ++       * on a byte boundary, and/or with erroneous trailing
>> >> characters.
>> >> ++       */
>> >> ++
>> >> ++      if (ch == Pad64) {              /* We got a pad char. */
>> >> ++              ch = *src++;            /* Skip it, get next. */
>> >> ++              switch (state) {
>> >> ++              case 0:         /* Invalid = in first position */
>> >> ++              case 1:         /* Invalid = in second position */
>> >> ++                      return (-1);
>> >> ++
>> >> ++              case 2:         /* Valid, means one byte of info */
>> >> ++                      /* Skip any number of spaces. */
>> >> ++                      for ((void)NULL; ch != '\0'; ch = *src++)
>> >> ++                              if (!isspace(ch))
>> >> ++                                      break;
>> >> ++                      /* Make sure there is another trailing = sign.
>> >> */
>> >> ++                      if (ch != Pad64)
>> >> ++                              return (-1);
>> >> ++                      ch = *src++;            /* Skip the = */
>> >> ++                      /* Fall through to "single trailing =" case. */
>> >> ++                      /* FALLTHROUGH */
>> >> ++
>> >> ++              case 3:         /* Valid, means two bytes of info */
>> >> ++                      /*
>> >> ++                       * We know this char is an =.  Is there
>> >> anything
>> >> but
>> >> ++                       * whitespace after it?
>> >> ++                       */
>> >> ++                      for ((void)NULL; ch != '\0'; ch = *src++)
>> >> ++                              if (!isspace(ch))
>> >> ++                                      return (-1);
>> >> ++
>> >> ++                      /*
>> >> ++                       * Now make sure for cases 2 and 3 that the
>> >> "extra"
>> >> ++                       * bits that slopped past the last full byte
>> >> were
>> >> ++                       * zeros.  If we don't check them, they become
>> >> a
>> >> ++                       * subliminal channel.
>> >> ++                       */
>> >> ++                      if (target && target[tarindex] != 0)
>> >> ++                              return (-1);
>> >> ++              }
>> >> ++      } else {
>> >> ++              /*
>> >> ++               * We ended by seeing the end of the string.  Make sure
>> >> we
>> >> ++               * have no partial bytes lying around.
>> >> ++               */
>> >> ++              if (state != 0)
>> >> ++                      return (-1);
>> >> ++      }
>> >> ++
>> >> ++      return (tarindex);
>> >> ++}
>> >> ++
>> >> +--
>> >> +2.14.1
>> >> +
>> >> diff --git
>> >>
>> >> a/meta-oe/recipes-devtools/android-tools/android-tools/0002-adb-Musl-fixes.patch
>> >>
>> >> b/meta-oe/recipes-devtools/android-tools/android-tools/0002-adb-Musl-fixes.patch
>> >> new file mode 100644
>> >> index 000000000..c7aebb641
>> >> --- /dev/null
>> >> +++
>> >>
>> >> b/meta-oe/recipes-devtools/android-tools/android-tools/0002-adb-Musl-fixes.patch
>> >> @@ -0,0 +1,134 @@
>> >> +From f8653ed0ede4aa781ab758fcd44fdc05ffbe0b0a Mon Sep 17 00:00:00 2001
>> >> +From: Khem Raj <raj.khem at gmail.com>
>> >> +Date: Fri, 15 Sep 2017 15:50:57 -0700
>> >> +Subject: [PATCH 2/2] adb: Musl fixes
>> >> +
>> >> +__nonnull is gcc specific
>> >> +include sys/types.h for size_t
>> >> +Do not redefine close() and lseek()
>> >> +
>> >> +Signed-off-by: Khem Raj <raj.khem at gmail.com>
>> >> +---
>> >> + system/core/adb/adb.h                    |  2 ++
>> >> + system/core/adb/disable_verity_service.c | 13 ++++++++-----
>> >> + system/core/adb/framebuffer_service.c    |  7 ++++---
>> >> + system/core/adb/sysdeps.h                | 12 ++++++------
>> >> + 4 files changed, 20 insertions(+), 14 deletions(-)
>> >> +
>> >> +diff --git a/system/core/adb/adb.h b/system/core/adb/adb.h
>> >> +index 44e5981..bcdc49f 100644
>> >> +--- a/system/core/adb/adb.h
>> >> ++++ b/system/core/adb/adb.h
>> >> +@@ -18,7 +18,9 @@
>> >> + #define __ADB_H
>> >> +
>> >> + #include <limits.h>
>> >> ++#include <sys/types.h>
>> >> +
>> >> ++#include "fdevent.h"
>> >> + #include "adb_trace.h"
>> >> + #include "transport.h"  /* readx(), writex() */
>> >> +
>> >> +diff --git a/system/core/adb/disable_verity_service.c
>> >> b/system/core/adb/disable_verity_service.c
>> >> +index ed3da52..29fa3d6 100644
>> >> +--- a/system/core/adb/disable_verity_service.c
>> >> ++++ b/system/core/adb/disable_verity_service.c
>> >> +@@ -14,25 +14,28 @@
>> >> +  * limitations under the License.
>> >> +  */
>> >> +
>> >> +-#include "sysdeps.h"
>> >> +
>> >> + #define  TRACE_TAG  TRACE_ADB
>> >> + #include "adb.h"
>> >> ++#include "sysdeps.h"
>> >> ++#include "cutils/properties.h"
>> >> ++#include "ext4_sb.h"
>> >> ++#include <fs_mgr.h>
>> >> +
>> >> + #include <stdio.h>
>> >> + #include <stdarg.h>
>> >> + #include <sys/stat.h>
>> >> + #include <fcntl.h>
>> >> + #include <inttypes.h>
>> >> ++#include <unistd.h>
>> >> ++#include <errno.h>
>> >> ++#include <stdbool.h>
>> >> +
>> >> +-#include "cutils/properties.h"
>> >> +-#include "ext4_sb.h"
>> >> +-#include <fs_mgr.h>
>> >> +
>> >> + #define FSTAB_PREFIX "/fstab."
>> >> + struct fstab *fstab;
>> >> +
>> >> +-__attribute__((__format__(printf, 2, 3))) __nonnull((2))
>> >> ++__attribute__((__format__(printf, 2, 3)))
>> >> __attribute__((nonnull((2))))
>> >> + static void write_console(int fd, const char* format, ...)
>> >> + {
>> >> +     char buffer[256];
>> >> +diff --git a/system/core/adb/framebuffer_service.c
>> >> b/system/core/adb/framebuffer_service.c
>> >> +index 8cbe840..8f0ccfb 100644
>> >> +--- a/system/core/adb/framebuffer_service.c
>> >> ++++ b/system/core/adb/framebuffer_service.c
>> >> +@@ -14,6 +14,10 @@
>> >> +  * limitations under the License.
>> >> +  */
>> >> +
>> >> ++#include "fdevent.h"
>> >> ++#include "adb.h"
>> >> ++#include "sysdeps.h"
>> >> ++
>> >> + #include <stdlib.h>
>> >> + #include <stdio.h>
>> >> + #include <unistd.h>
>> >> +@@ -23,9 +27,6 @@
>> >> + #include <sys/types.h>
>> >> + #include <sys/wait.h>
>> >> +
>> >> +-#include "fdevent.h"
>> >> +-#include "adb.h"
>> >> +-
>> >> + #include <linux/fb.h>
>> >> + #include <sys/ioctl.h>
>> >> + #include <sys/mman.h>
>> >> +diff --git a/system/core/adb/sysdeps.h b/system/core/adb/sysdeps.h
>> >> +index cc1f839..ea39ac3 100644
>> >> +--- a/system/core/adb/sysdeps.h
>> >> ++++ b/system/core/adb/sysdeps.h
>> >> +@@ -123,8 +123,8 @@ static __inline__ int  unix_close(int fd)
>> >> + {
>> >> +     return close(fd);
>> >> + }
>> >> +-#undef   close
>> >> +-#define  close   ____xxx_close
>> >> ++//#undef   close
>> >> ++//#define  close   ____xxx_close
>> >> +
>> >> + static __inline__  int  unix_read(int  fd, void*  buf, size_t  len)
>> >> + {
>> >> +@@ -369,8 +369,8 @@ static __inline__ int  adb_close(int fd)
>> >> + {
>> >> +     return close(fd);
>> >> + }
>> >> +-#undef   close
>> >> +-#define  close   ____xxx_close
>> >> ++//#undef   close
>> >> ++//#define  close   ____xxx_close
>> >> +
>> >> +
>> >> + static __inline__  int  adb_read(int  fd, void*  buf, size_t  len)
>> >> +@@ -392,8 +392,8 @@ static __inline__ int   adb_lseek(int  fd, int
>> >> pos,
>> >> int  where)
>> >> + {
>> >> +     return lseek(fd, pos, where);
>> >> + }
>> >> +-#undef   lseek
>> >> +-#define  lseek   ___xxx_lseek
>> >> ++//#undef   lseek
>> >> ++//#define  lseek   ___xxx_lseek
>> >> +
>> >> + static __inline__  int    adb_unlink(const char*  path)
>> >> + {
>> >> +--
>> >> +2.14.1
>> >> +
>> >> diff --git
>> >> a/meta-oe/recipes-devtools/android-tools/android-tools/adbd.mk
>> >> b/meta-oe/recipes-devtools/android-tools/android-tools/adbd.mk
>> >> index 84cd06b10..31452ae10 100644
>> >> --- a/meta-oe/recipes-devtools/android-tools/android-tools/adbd.mk
>> >> +++ b/meta-oe/recipes-devtools/android-tools/android-tools/adbd.mk
>> >> @@ -16,6 +16,7 @@ adbd_SRC_FILES += jdwp_service.c
>> >>  adbd_SRC_FILES += framebuffer_service.c
>> >>  adbd_SRC_FILES += remount_service.c
>> >>  adbd_SRC_FILES += disable_verity_service.c
>> >> +adbd_SRC_FILES += base64.c
>> >>  adbd_SRC_FILES += usb_linux_client.c
>> >>  adbd_OBJS := $(adbd_SRC_FILES:.c=.o)
>> >>
>> >> diff --git
>> >> a/meta-oe/recipes-devtools/android-tools/android-tools_5.1.1.r37.bb
>> >> b/meta-oe/recipes-devtools/android-tools/android-tools_5.1.1.r37.bb
>> >> index 34fddcbda..75f5b9e26 100644
>> >> --- a/meta-oe/recipes-devtools/android-tools/android-tools_5.1.1.r37.bb
>> >> +++ b/meta-oe/recipes-devtools/android-tools/android-tools_5.1.1.r37.bb
>> >> @@ -32,6 +32,8 @@ SRC_URI = " \
>> >>      file://define-shell-command.patch \
>> >>      file://implicit-declaration-function-strlcat-strlcopy.patch \
>> >>      file://fix-big-endian-build.patch \
>> >> +    file://0001-add-base64-implementation.patch \
>> >> +    file://0002-adb-Musl-fixes.patch \
>> >>      file://android-tools-adbd.service \
>> >>      file://.gitignore;subdir=git \
>> >>      file://adb.mk;subdir=${BPN} \
>> >> --
>> >> 2.14.1
>> >>
>> >> --
>> >> _______________________________________________
>> >> Openembedded-devel mailing list
>> >> Openembedded-devel at lists.openembedded.org
>> >> http://lists.openembedded.org/mailman/listinfo/openembedded-devel
>> >
>> >
>
>



More information about the Openembedded-devel mailing list