[oe] [PATCH] syslog-ng: fix syslog-ng startup problem with systemd
Changqing Li
changqing.li at windriver.com
Fri Jun 15 04:23:04 UTC 2018
There are one error and one fail when run "systemctl status syslog-ng"
Error opening control socket, bind() failed; socket='/var/run/syslog-ng/syslog-ng.ctl', error='No such file or directory (2)'
Failed to acquire /run/systemd/journal/syslog socket, disabling systemd-syslog source;
1. To fix the error info:
if config with "--with-pidfile-dir=${localstatedir}/run/${BPN}", according to syslog-ng code
(define PATH_CONTROL_SOCKET SYSLOG_NG_PATH_PIDFILEDIR "/syslog-ng.ctl"), path of control socket also
will be /var/run/syslog-ng, but after boot, there is no directory syslog-ng under /var/run, so this
will not work for systemd. here change initscript to /var/lib/syslog-ng, and remove --with-pidfile,
so that sysVinit and systemd all use /var/lib/syslog-ng, and also remove pid config in the syslog-ng service
patch to align the pid file path. so both systemd and sysvinit can work.
2. To fix the Failed info:
According below content of admin guide of current version of syslog-ng, change source to systemd-journal
of syslog-ng.conf for systemd.
1) for linux, If the host is running under systemd, syslog-ng OSE reads directly from the systemd journal file using the
systemd-journal() source.
2) If possible, use the more reliable systemd-journal() driver instead.
3) The socket activation of systemd is buggy, causing some log messages to get lost during system startup.
but sysvinit not recognize systemd-journal, so seperate it to 2 conf, and install according to current config.
Signed-off-by: Changqing Li <changqing.li at windriver.com>
---
meta-oe/recipes-support/syslog-ng/files/initscript | 2 +-
.../recipes-support/syslog-ng/files/syslog-ng.conf | 155 --------------------
.../syslog-ng/files/syslog-ng.conf.systemd | 157 +++++++++++++++++++++
.../syslog-ng/files/syslog-ng.conf.sysvinit | 155 ++++++++++++++++++++
.../syslog-ng.service-the-syslog-ng-service.patch | 2 +-
meta-oe/recipes-support/syslog-ng/syslog-ng.inc | 10 +-
6 files changed, 321 insertions(+), 160 deletions(-)
delete mode 100644 meta-oe/recipes-support/syslog-ng/files/syslog-ng.conf
create mode 100644 meta-oe/recipes-support/syslog-ng/files/syslog-ng.conf.systemd
create mode 100644 meta-oe/recipes-support/syslog-ng/files/syslog-ng.conf.sysvinit
diff --git a/meta-oe/recipes-support/syslog-ng/files/initscript b/meta-oe/recipes-support/syslog-ng/files/initscript
index 910030f..777e73c 100644
--- a/meta-oe/recipes-support/syslog-ng/files/initscript
+++ b/meta-oe/recipes-support/syslog-ng/files/initscript
@@ -11,7 +11,7 @@
syslog_ng=/usr/sbin/syslog-ng
test -x "$syslog_ng" || exit 0
-PIDFILE=/var/run/syslog-ng/syslog-ng.pid
+PIDFILE=/var/lib/syslog-ng/syslog-ng.pid
create_xconsole() {
test -e /dev/xconsole || mknod -m 640 /dev/xconsole p
diff --git a/meta-oe/recipes-support/syslog-ng/files/syslog-ng.conf b/meta-oe/recipes-support/syslog-ng/files/syslog-ng.conf
deleted file mode 100644
index 0c6f543..0000000
--- a/meta-oe/recipes-support/syslog-ng/files/syslog-ng.conf
+++ /dev/null
@@ -1,155 +0,0 @@
- at version: 3.8
-#
-# Syslog-ng configuration file, compatible with default Debian syslogd
-# installation. Originally written by anonymous (I can't find his name)
-# Revised, and rewrited by me (SZALAY Attila <sasa at debian.org>)
-
-# First, set some global options.
-options { chain_hostnames(off); flush_lines(0); use_dns(no); use_fqdn(no);
- owner("root"); group("adm"); perm(0640); stats_freq(0);
- bad_hostname("^gconfd$");
-};
-
-########################
-# Sources
-########################
-# This is the default behavior of sysklogd package
-# Logs may come from unix stream, but not from another machine.
-#
-source s_src { unix-dgram("/dev/log"); internal();
- file("/proc/kmsg" program_override("kernel"));
-};
-
-# If you wish to get logs from remote machine you should uncomment
-# this and comment the above source line.
-#
-#source s_net { tcp(ip(127.0.0.1) port(1000) authentication(required) encrypt(allow)); };
-
-########################
-# Destinations
-########################
-# First some standard logfile
-#
-destination d_auth { file("/var/log/auth.log"); };
-destination d_cron { file("/var/log/cron.log"); };
-destination d_daemon { file("/var/log/daemon.log"); };
-destination d_kern { file("/var/log/kern.log"); };
-destination d_lpr { file("/var/log/lpr.log"); };
-destination d_mail { file("/var/log/mail.log"); };
-destination d_syslog { file("/var/log/syslog"); };
-destination d_user { file("/var/log/user.log"); };
-destination d_uucp { file("/var/log/uucp.log"); };
-
-# This files are the log come from the mail subsystem.
-#
-destination d_mailinfo { file("/var/log/mail/mail.info"); };
-destination d_mailwarn { file("/var/log/mail/mail.warn"); };
-destination d_mailerr { file("/var/log/mail/mail.err"); };
-
-# Logging for INN news system
-#
-destination d_newscrit { file("/var/log/news/news.crit"); };
-destination d_newserr { file("/var/log/news/news.err"); };
-destination d_newsnotice { file("/var/log/news/news.notice"); };
-
-# Some 'catch-all' logfiles.
-#
-destination d_debug { file("/var/log/debug"); };
-destination d_error { file("/var/log/error"); };
-destination d_messages { file("/var/log/messages"); };
-
-# The root's console.
-#
-destination d_console { usertty("root"); };
-
-# Virtual console.
-#
-destination d_console_all { file("/dev/tty10"); };
-
-# The named pipe /dev/xconsole is for the nsole' utility. To use it,
-# you must invoke nsole' with the -file' option:
-#
-# $ xconsole -file /dev/xconsole [...]
-#
-destination d_xconsole { pipe("/dev/xconsole"); };
-
-# Send the messages to an other host
-#
-#destination d_net { tcp("127.0.0.1" port(1000) authentication(on) encrypt(on) log_fifo_size(1000)); };
-
-# Debian only
-destination d_ppp { file("/var/log/ppp.log"); };
-
-########################
-# Filters
-########################
-# Here's come the filter options. With this rules, we can set which
-# message go where.
-
-filter f_dbg { level(debug); };
-filter f_info { level(info); };
-filter f_notice { level(notice); };
-filter f_warn { level(warn); };
-filter f_err { level(err); };
-filter f_crit { level(crit .. emerg); };
-
-filter f_debug { level(debug) and not facility(auth, authpriv, news, mail); };
-filter f_error { level(err .. emerg) ; };
-filter f_messages { level(info,notice,warn) and
- not facility(auth,authpriv,cron,daemon,mail,news); };
-
-filter f_auth { facility(auth, authpriv) and not filter(f_debug); };
-filter f_cron { facility(cron) and not filter(f_debug); };
-filter f_daemon { facility(daemon) and not filter(f_debug); };
-filter f_kern { facility(kern) and not filter(f_debug); };
-filter f_lpr { facility(lpr) and not filter(f_debug); };
-filter f_local { facility(local0, local1, local3, local4, local5,
- local6, local7) and not filter(f_debug); };
-filter f_mail { facility(mail) and not filter(f_debug); };
-filter f_news { facility(news) and not filter(f_debug); };
-filter f_syslog3 { not facility(auth, authpriv, mail) and not filter(f_debug); };
-filter f_user { facility(user) and not filter(f_debug); };
-filter f_uucp { facility(uucp) and not filter(f_debug); };
-
-filter f_cnews { level(notice, err, crit) and facility(news); };
-filter f_cother { level(debug, info, notice, warn) or facility(daemon, mail); };
-
-filter f_ppp { facility(local2) and not filter(f_debug); };
-filter f_console { level(warn .. emerg); };
-
-########################
-# Log paths
-########################
-log { source(s_src); filter(f_auth); destination(d_auth); };
-log { source(s_src); filter(f_cron); destination(d_cron); };
-log { source(s_src); filter(f_daemon); destination(d_daemon); };
-log { source(s_src); filter(f_kern); destination(d_kern); };
-log { source(s_src); filter(f_lpr); destination(d_lpr); };
-log { source(s_src); filter(f_syslog3); destination(d_syslog); };
-log { source(s_src); filter(f_user); destination(d_user); };
-log { source(s_src); filter(f_uucp); destination(d_uucp); };
-
-log { source(s_src); filter(f_mail); destination(d_mail); };
-#log { source(s_src); filter(f_mail); filter(f_info); destination(d_mailinfo); };
-#log { source(s_src); filter(f_mail); filter(f_warn); destination(d_mailwarn); };
-#log { source(s_src); filter(f_mail); filter(f_err); destination(d_mailerr); };
-
-log { source(s_src); filter(f_news); filter(f_crit); destination(d_newscrit); };
-log { source(s_src); filter(f_news); filter(f_err); destination(d_newserr); };
-log { source(s_src); filter(f_news); filter(f_notice); destination(d_newsnotice); };
-#log { source(s_src); filter(f_cnews); destination(d_console_all); };
-#log { source(s_src); filter(f_cother); destination(d_console_all); };
-
-#log { source(s_src); filter(f_ppp); destination(d_ppp); };
-
-log { source(s_src); filter(f_debug); destination(d_debug); };
-log { source(s_src); filter(f_error); destination(d_error); };
-log { source(s_src); filter(f_messages); destination(d_messages); };
-
-log { source(s_src); filter(f_console); destination(d_console_all);
- destination(d_xconsole); };
-log { source(s_src); filter(f_crit); destination(d_console); };
-
-# All messages send to a remote site
-#
-#log { source(s_src); destination(d_net); };
diff --git a/meta-oe/recipes-support/syslog-ng/files/syslog-ng.conf.systemd b/meta-oe/recipes-support/syslog-ng/files/syslog-ng.conf.systemd
new file mode 100644
index 0000000..d21fa1f
--- /dev/null
+++ b/meta-oe/recipes-support/syslog-ng/files/syslog-ng.conf.systemd
@@ -0,0 +1,157 @@
+ at version: 3.8
+#
+# Syslog-ng configuration file, compatible with default Debian syslogd
+# installation. Originally written by anonymous (I can't find his name)
+# Revised, and rewrited by me (SZALAY Attila <sasa at debian.org>)
+
+# First, set some global options.
+options { chain_hostnames(off); flush_lines(0); use_dns(no); use_fqdn(no);
+ owner("root"); group("adm"); perm(0640); stats_freq(0);
+ bad_hostname("^gconfd$");
+};
+
+########################
+# Sources
+########################
+# This is the default behavior of sysklogd package
+# Logs may come from unix stream, but not from another machine.
+#
+source s_src {
+ systemd-journal();
+ file("/proc/kmsg" program-override("kernel"));
+ internal();
+};
+
+# If you wish to get logs from remote machine you should uncomment
+# this and comment the above source line.
+#
+#source s_net { tcp(ip(127.0.0.1) port(1000) authentication(required) encrypt(allow)); };
+
+########################
+# Destinations
+########################
+# First some standard logfile
+#
+destination d_auth { file("/var/log/auth.log"); };
+destination d_cron { file("/var/log/cron.log"); };
+destination d_daemon { file("/var/log/daemon.log"); };
+destination d_kern { file("/var/log/kern.log"); };
+destination d_lpr { file("/var/log/lpr.log"); };
+destination d_mail { file("/var/log/mail.log"); };
+destination d_syslog { file("/var/log/syslog"); };
+destination d_user { file("/var/log/user.log"); };
+destination d_uucp { file("/var/log/uucp.log"); };
+
+# This files are the log come from the mail subsystem.
+#
+destination d_mailinfo { file("/var/log/mail/mail.info"); };
+destination d_mailwarn { file("/var/log/mail/mail.warn"); };
+destination d_mailerr { file("/var/log/mail/mail.err"); };
+
+# Logging for INN news system
+#
+destination d_newscrit { file("/var/log/news/news.crit"); };
+destination d_newserr { file("/var/log/news/news.err"); };
+destination d_newsnotice { file("/var/log/news/news.notice"); };
+
+# Some 'catch-all' logfiles.
+#
+destination d_debug { file("/var/log/debug"); };
+destination d_error { file("/var/log/error"); };
+destination d_messages { file("/var/log/messages"); };
+
+# The root's console.
+#
+destination d_console { usertty("root"); };
+
+# Virtual console.
+#
+destination d_console_all { file("/dev/tty10"); };
+
+# The named pipe /dev/xconsole is for the nsole' utility. To use it,
+# you must invoke nsole' with the -file' option:
+#
+# $ xconsole -file /dev/xconsole [...]
+#
+destination d_xconsole { pipe("/dev/xconsole"); };
+
+# Send the messages to an other host
+#
+#destination d_net { tcp("127.0.0.1" port(1000) authentication(on) encrypt(on) log_fifo_size(1000)); };
+
+# Debian only
+destination d_ppp { file("/var/log/ppp.log"); };
+
+########################
+# Filters
+########################
+# Here's come the filter options. With this rules, we can set which
+# message go where.
+
+filter f_dbg { level(debug); };
+filter f_info { level(info); };
+filter f_notice { level(notice); };
+filter f_warn { level(warn); };
+filter f_err { level(err); };
+filter f_crit { level(crit .. emerg); };
+
+filter f_debug { level(debug) and not facility(auth, authpriv, news, mail); };
+filter f_error { level(err .. emerg) ; };
+filter f_messages { level(info,notice,warn) and
+ not facility(auth,authpriv,cron,daemon,mail,news); };
+
+filter f_auth { facility(auth, authpriv) and not filter(f_debug); };
+filter f_cron { facility(cron) and not filter(f_debug); };
+filter f_daemon { facility(daemon) and not filter(f_debug); };
+filter f_kern { facility(kern) and not filter(f_debug); };
+filter f_lpr { facility(lpr) and not filter(f_debug); };
+filter f_local { facility(local0, local1, local3, local4, local5,
+ local6, local7) and not filter(f_debug); };
+filter f_mail { facility(mail) and not filter(f_debug); };
+filter f_news { facility(news) and not filter(f_debug); };
+filter f_syslog3 { not facility(auth, authpriv, mail) and not filter(f_debug); };
+filter f_user { facility(user) and not filter(f_debug); };
+filter f_uucp { facility(uucp) and not filter(f_debug); };
+
+filter f_cnews { level(notice, err, crit) and facility(news); };
+filter f_cother { level(debug, info, notice, warn) or facility(daemon, mail); };
+
+filter f_ppp { facility(local2) and not filter(f_debug); };
+filter f_console { level(warn .. emerg); };
+
+########################
+# Log paths
+########################
+log { source(s_src); filter(f_auth); destination(d_auth); };
+log { source(s_src); filter(f_cron); destination(d_cron); };
+log { source(s_src); filter(f_daemon); destination(d_daemon); };
+log { source(s_src); filter(f_kern); destination(d_kern); };
+log { source(s_src); filter(f_lpr); destination(d_lpr); };
+log { source(s_src); filter(f_syslog3); destination(d_syslog); };
+log { source(s_src); filter(f_user); destination(d_user); };
+log { source(s_src); filter(f_uucp); destination(d_uucp); };
+
+log { source(s_src); filter(f_mail); destination(d_mail); };
+#log { source(s_src); filter(f_mail); filter(f_info); destination(d_mailinfo); };
+#log { source(s_src); filter(f_mail); filter(f_warn); destination(d_mailwarn); };
+#log { source(s_src); filter(f_mail); filter(f_err); destination(d_mailerr); };
+
+log { source(s_src); filter(f_news); filter(f_crit); destination(d_newscrit); };
+log { source(s_src); filter(f_news); filter(f_err); destination(d_newserr); };
+log { source(s_src); filter(f_news); filter(f_notice); destination(d_newsnotice); };
+#log { source(s_src); filter(f_cnews); destination(d_console_all); };
+#log { source(s_src); filter(f_cother); destination(d_console_all); };
+
+#log { source(s_src); filter(f_ppp); destination(d_ppp); };
+
+log { source(s_src); filter(f_debug); destination(d_debug); };
+log { source(s_src); filter(f_error); destination(d_error); };
+log { source(s_src); filter(f_messages); destination(d_messages); };
+
+log { source(s_src); filter(f_console); destination(d_console_all);
+ destination(d_xconsole); };
+log { source(s_src); filter(f_crit); destination(d_console); };
+
+# All messages send to a remote site
+#
+#log { source(s_src); destination(d_net); };
diff --git a/meta-oe/recipes-support/syslog-ng/files/syslog-ng.conf.sysvinit b/meta-oe/recipes-support/syslog-ng/files/syslog-ng.conf.sysvinit
new file mode 100644
index 0000000..4a059d4
--- /dev/null
+++ b/meta-oe/recipes-support/syslog-ng/files/syslog-ng.conf.sysvinit
@@ -0,0 +1,155 @@
+ at version: 3.8
+#
+# Syslog-ng configuration file, compatible with default Debian syslogd
+# installation. Originally written by anonymous (I can't find his name)
+# Revised, and rewrited by me (SZALAY Attila <sasa at debian.org>)
+
+# First, set some global options.
+options { chain_hostnames(off); flush_lines(0); use_dns(no); use_fqdn(no);
+ owner("root"); group("adm"); perm(0640); stats_freq(0);
+ bad_hostname("^gconfd$");
+};
+
+########################
+# Sources
+########################
+# This is the default behavior of sysklogd package
+# Logs may come from unix stream, but not from another machine.
+#
+source s_src { unix-dgram("/dev/log"); internal();
+ file("/proc/kmsg" program_override("kernel"));
+};
+
+# If you wish to get logs from remote machine you should uncomment
+# this and comment the above source line.
+#
+#source s_net { tcp(ip(127.0.0.1) port(1000) authentication(required) encrypt(allow)); };
+
+########################
+# Destinations
+########################
+# First some standard logfile
+#
+destination d_auth { file("/var/log/auth.log"); };
+destination d_cron { file("/var/log/cron.log"); };
+destination d_daemon { file("/var/log/daemon.log"); };
+destination d_kern { file("/var/log/kern.log"); };
+destination d_lpr { file("/var/log/lpr.log"); };
+destination d_mail { file("/var/log/mail.log"); };
+destination d_syslog { file("/var/log/syslog"); };
+destination d_user { file("/var/log/user.log"); };
+destination d_uucp { file("/var/log/uucp.log"); };
+
+# This files are the log come from the mail subsystem.
+#
+destination d_mailinfo { file("/var/log/mail/mail.info"); };
+destination d_mailwarn { file("/var/log/mail/mail.warn"); };
+destination d_mailerr { file("/var/log/mail/mail.err"); };
+
+# Logging for INN news system
+#
+destination d_newscrit { file("/var/log/news/news.crit"); };
+destination d_newserr { file("/var/log/news/news.err"); };
+destination d_newsnotice { file("/var/log/news/news.notice"); };
+
+# Some 'catch-all' logfiles.
+#
+destination d_debug { file("/var/log/debug"); };
+destination d_error { file("/var/log/error"); };
+destination d_messages { file("/var/log/messages"); };
+
+# The root's console.
+#
+destination d_console { usertty("root"); };
+
+# Virtual console.
+#
+destination d_console_all { file("/dev/tty10"); };
+
+# The named pipe /dev/xconsole is for the nsole' utility. To use it,
+# you must invoke nsole' with the -file' option:
+#
+# $ xconsole -file /dev/xconsole [...]
+#
+destination d_xconsole { pipe("/dev/xconsole"); };
+
+# Send the messages to an other host
+#
+#destination d_net { tcp("127.0.0.1" port(1000) authentication(on) encrypt(on) log_fifo_size(1000)); };
+
+# Debian only
+destination d_ppp { file("/var/log/ppp.log"); };
+
+########################
+# Filters
+########################
+# Here's come the filter options. With this rules, we can set which
+# message go where.
+
+filter f_dbg { level(debug); };
+filter f_info { level(info); };
+filter f_notice { level(notice); };
+filter f_warn { level(warn); };
+filter f_err { level(err); };
+filter f_crit { level(crit .. emerg); };
+
+filter f_debug { level(debug) and not facility(auth, authpriv, news, mail); };
+filter f_error { level(err .. emerg) ; };
+filter f_messages { level(info,notice,warn) and
+ not facility(auth,authpriv,cron,daemon,mail,news); };
+
+filter f_auth { facility(auth, authpriv) and not filter(f_debug); };
+filter f_cron { facility(cron) and not filter(f_debug); };
+filter f_daemon { facility(daemon) and not filter(f_debug); };
+filter f_kern { facility(kern) and not filter(f_debug); };
+filter f_lpr { facility(lpr) and not filter(f_debug); };
+filter f_local { facility(local0, local1, local3, local4, local5,
+ local6, local7) and not filter(f_debug); };
+filter f_mail { facility(mail) and not filter(f_debug); };
+filter f_news { facility(news) and not filter(f_debug); };
+filter f_syslog3 { not facility(auth, authpriv, mail) and not filter(f_debug); };
+filter f_user { facility(user) and not filter(f_debug); };
+filter f_uucp { facility(uucp) and not filter(f_debug); };
+
+filter f_cnews { level(notice, err, crit) and facility(news); };
+filter f_cother { level(debug, info, notice, warn) or facility(daemon, mail); };
+
+filter f_ppp { facility(local2) and not filter(f_debug); };
+filter f_console { level(warn .. emerg); };
+
+########################
+# Log paths
+########################
+log { source(s_src); filter(f_auth); destination(d_auth); };
+log { source(s_src); filter(f_cron); destination(d_cron); };
+log { source(s_src); filter(f_daemon); destination(d_daemon); };
+log { source(s_src); filter(f_kern); destination(d_kern); };
+log { source(s_src); filter(f_lpr); destination(d_lpr); };
+log { source(s_src); filter(f_syslog3); destination(d_syslog); };
+log { source(s_src); filter(f_user); destination(d_user); };
+log { source(s_src); filter(f_uucp); destination(d_uucp); };
+
+log { source(s_src); filter(f_mail); destination(d_mail); };
+#log { source(s_src); filter(f_mail); filter(f_info); destination(d_mailinfo); };
+#log { source(s_src); filter(f_mail); filter(f_warn); destination(d_mailwarn); };
+#log { source(s_src); filter(f_mail); filter(f_err); destination(d_mailerr); };
+
+log { source(s_src); filter(f_news); filter(f_crit); destination(d_newscrit); };
+log { source(s_src); filter(f_news); filter(f_err); destination(d_newserr); };
+log { source(s_src); filter(f_news); filter(f_notice); destination(d_newsnotice); };
+#log { source(s_src); filter(f_cnews); destination(d_console_all); };
+#log { source(s_src); filter(f_cother); destination(d_console_all); };
+
+#log { source(s_src); filter(f_ppp); destination(d_ppp); };
+
+log { source(s_src); filter(f_debug); destination(d_debug); };
+log { source(s_src); filter(f_error); destination(d_error); };
+log { source(s_src); filter(f_messages); destination(d_messages); };
+
+log { source(s_src); filter(f_console); destination(d_console_all);
+ destination(d_xconsole); };
+log { source(s_src); filter(f_crit); destination(d_console); };
+
+# All messages send to a remote site
+#
+#log { source(s_src); destination(d_net); };
diff --git a/meta-oe/recipes-support/syslog-ng/files/syslog-ng.service-the-syslog-ng-service.patch b/meta-oe/recipes-support/syslog-ng/files/syslog-ng.service-the-syslog-ng-service.patch
index 6b30c20..1a11ea8 100644
--- a/meta-oe/recipes-support/syslog-ng/files/syslog-ng.service-the-syslog-ng-service.patch
+++ b/meta-oe/recipes-support/syslog-ng/files/syslog-ng.service-the-syslog-ng-service.patch
@@ -21,7 +21,7 @@ index fc16f8d..8e09deb 100644
Type=notify
-ExecStart=/usr/sbin/syslog-ng -F $SYSLOGNG_OPTS
-ExecReload=/bin/kill -HUP $MAINPID
-+ExecStart=@SBINDIR@/syslog-ng -F $SYSLOGNG_OPTS -p @LOCALSTATEDIR@/run/syslogd.pid
++ExecStart=@SBINDIR@/syslog-ng -F $SYSLOGNG_OPTS
+ExecReload=@BASEBINDIR@/kill -HUP $MAINPID
EnvironmentFile=-/etc/default/syslog-ng
EnvironmentFile=-/etc/sysconfig/syslog-ng
diff --git a/meta-oe/recipes-support/syslog-ng/syslog-ng.inc b/meta-oe/recipes-support/syslog-ng/syslog-ng.inc
index cb7ca31..feb2882 100644
--- a/meta-oe/recipes-support/syslog-ng/syslog-ng.inc
+++ b/meta-oe/recipes-support/syslog-ng/syslog-ng.inc
@@ -16,7 +16,8 @@ LIC_FILES_CHKSUM = "file://COPYING;md5=24c0c5cb2c83d9f2ab725481e4df5240"
DEPENDS = "libpcre flex eventlog glib-2.0 openssl util-linux"
SRC_URI = "https://github.com/balabit/syslog-ng/releases/download/${BP}/${BP}.tar.gz \
- file://syslog-ng.conf \
+ file://syslog-ng.conf.systemd \
+ file://syslog-ng.conf.sysvinit \
file://initscript \
file://volatiles.03_syslog-ng \
file://configure.ac-add-option-enable-thread-tls-to-manage-.patch \
@@ -38,7 +39,6 @@ EXTRA_OECONF = " \
--with-librabbitmq-client=no \
--disable-python \
--disable-java --disable-java-modules \
- --with-pidfile-dir=${localstatedir}/run/${BPN} \
${CONFIG_TLS} \
"
@@ -77,7 +77,11 @@ do_install_prepend() {
do_install_append() {
install -d ${D}/${sysconfdir}/${BPN}
- install ${WORKDIR}/syslog-ng.conf ${D}${sysconfdir}/${BPN}/${BPN}.conf
+ if ${@bb.utils.contains('DISTRO_FEATURES','systemd','true','false',d)};then
+ install ${WORKDIR}/syslog-ng.conf.systemd ${D}${sysconfdir}/${BPN}/${BPN}.conf
+ else
+ install ${WORKDIR}/syslog-ng.conf.sysvinit ${D}${sysconfdir}/${BPN}/${BPN}.conf
+ fi
install -d ${D}/${sysconfdir}/init.d
install -m 755 ${WORKDIR}/initscript ${D}/${sysconfdir}/init.d/syslog
install -d ${D}/${sysconfdir}/default/volatiles/
--
2.7.4
More information about the Openembedded-devel
mailing list