[oe] [PATCH] syslog-ng: fix syslog-ng startup problem with systemd
Changqing Li
changqing.li at windriver.com
Fri Jun 15 08:08:06 UTC 2018
On 06/15/2018 02:29 PM, Khem Raj wrote:
> On Thu, Jun 14, 2018 at 10:12 PM Changqing Li
> <changqing.li at windriver.com> wrote:
>> By the way, I notice that there is no difference between master and
>> master-next for "meta-oe/recipes-support/syslog-ng"
>>
> pwclient fails to cherry-pick this patch. and me solving conflicts
> here can be error prone.
>
>> Can I know why we need a patch based on master-next? Seems the patch
>> will same for master and master-next.
>>
> since master-next is where the queue for upcoming patches is and sometimes there
> are related patches which should be sequenced. Look at my email sent
> about master-next
Thanks. I can see this conflicts commit now. I use local mirror
just now, so don't see the commit
timely. Now I got your mean. And I will resend a patch based on
master-next later.
//changqing li
>> Thanks.
>>
>> On 06/15/2018 12:48 PM, Khem Raj wrote:
>>> Can you rebase and resend it on top of master-next please
>>>
>>> On Thu, Jun 14, 2018 at 9:23 PM Changqing Li <changqing.li at windriver.com> wrote:
>>>> There are one error and one fail when run "systemctl status syslog-ng"
>>>>
>>>> Error opening control socket, bind() failed; socket='/var/run/syslog-ng/syslog-ng.ctl', error='No such file or directory (2)'
>>>> Failed to acquire /run/systemd/journal/syslog socket, disabling systemd-syslog source;
>>>>
>>>> 1. To fix the error info:
>>>> if config with "--with-pidfile-dir=${localstatedir}/run/${BPN}", according to syslog-ng code
>>>> (define PATH_CONTROL_SOCKET SYSLOG_NG_PATH_PIDFILEDIR "/syslog-ng.ctl"), path of control socket also
>>>> will be /var/run/syslog-ng, but after boot, there is no directory syslog-ng under /var/run, so this
>>>> will not work for systemd. here change initscript to /var/lib/syslog-ng, and remove --with-pidfile,
>>>> so that sysVinit and systemd all use /var/lib/syslog-ng, and also remove pid config in the syslog-ng service
>>>> patch to align the pid file path. so both systemd and sysvinit can work.
>>>>
>>>> 2. To fix the Failed info:
>>>> According below content of admin guide of current version of syslog-ng, change source to systemd-journal
>>>> of syslog-ng.conf for systemd.
>>>> 1) for linux, If the host is running under systemd, syslog-ng OSE reads directly from the systemd journal file using the
>>>> systemd-journal() source.
>>>> 2) If possible, use the more reliable systemd-journal() driver instead.
>>>> 3) The socket activation of systemd is buggy, causing some log messages to get lost during system startup.
>>>>
>>>> but sysvinit not recognize systemd-journal, so seperate it to 2 conf, and install according to current config.
>>>>
>>>> Signed-off-by: Changqing Li <changqing.li at windriver.com>
>>>> ---
>>>> meta-oe/recipes-support/syslog-ng/files/initscript | 2 +-
>>>> .../recipes-support/syslog-ng/files/syslog-ng.conf | 155 --------------------
>>>> .../syslog-ng/files/syslog-ng.conf.systemd | 157 +++++++++++++++++++++
>>>> .../syslog-ng/files/syslog-ng.conf.sysvinit | 155 ++++++++++++++++++++
>>>> .../syslog-ng.service-the-syslog-ng-service.patch | 2 +-
>>>> meta-oe/recipes-support/syslog-ng/syslog-ng.inc | 10 +-
>>>> 6 files changed, 321 insertions(+), 160 deletions(-)
>>>> delete mode 100644 meta-oe/recipes-support/syslog-ng/files/syslog-ng.conf
>>>> create mode 100644 meta-oe/recipes-support/syslog-ng/files/syslog-ng.conf.systemd
>>>> create mode 100644 meta-oe/recipes-support/syslog-ng/files/syslog-ng.conf.sysvinit
>>>>
>>>> diff --git a/meta-oe/recipes-support/syslog-ng/files/initscript b/meta-oe/recipes-support/syslog-ng/files/initscript
>>>> index 910030f..777e73c 100644
>>>> --- a/meta-oe/recipes-support/syslog-ng/files/initscript
>>>> +++ b/meta-oe/recipes-support/syslog-ng/files/initscript
>>>> @@ -11,7 +11,7 @@
>>>> syslog_ng=/usr/sbin/syslog-ng
>>>> test -x "$syslog_ng" || exit 0
>>>>
>>>> -PIDFILE=/var/run/syslog-ng/syslog-ng.pid
>>>> +PIDFILE=/var/lib/syslog-ng/syslog-ng.pid
>>>>
>>>> create_xconsole() {
>>>> test -e /dev/xconsole || mknod -m 640 /dev/xconsole p
>>>> diff --git a/meta-oe/recipes-support/syslog-ng/files/syslog-ng.conf b/meta-oe/recipes-support/syslog-ng/files/syslog-ng.conf
>>>> deleted file mode 100644
>>>> index 0c6f543..0000000
>>>> --- a/meta-oe/recipes-support/syslog-ng/files/syslog-ng.conf
>>>> +++ /dev/null
>>>> @@ -1,155 +0,0 @@
>>>> - at version: 3.8
>>>> -#
>>>> -# Syslog-ng configuration file, compatible with default Debian syslogd
>>>> -# installation. Originally written by anonymous (I can't find his name)
>>>> -# Revised, and rewrited by me (SZALAY Attila <sasa at debian.org>)
>>>> -
>>>> -# First, set some global options.
>>>> -options { chain_hostnames(off); flush_lines(0); use_dns(no); use_fqdn(no);
>>>> - owner("root"); group("adm"); perm(0640); stats_freq(0);
>>>> - bad_hostname("^gconfd$");
>>>> -};
>>>> -
>>>> -########################
>>>> -# Sources
>>>> -########################
>>>> -# This is the default behavior of sysklogd package
>>>> -# Logs may come from unix stream, but not from another machine.
>>>> -#
>>>> -source s_src { unix-dgram("/dev/log"); internal();
>>>> - file("/proc/kmsg" program_override("kernel"));
>>>> -};
>>>> -
>>>> -# If you wish to get logs from remote machine you should uncomment
>>>> -# this and comment the above source line.
>>>> -#
>>>> -#source s_net { tcp(ip(127.0.0.1) port(1000) authentication(required) encrypt(allow)); };
>>>> -
>>>> -########################
>>>> -# Destinations
>>>> -########################
>>>> -# First some standard logfile
>>>> -#
>>>> -destination d_auth { file("/var/log/auth.log"); };
>>>> -destination d_cron { file("/var/log/cron.log"); };
>>>> -destination d_daemon { file("/var/log/daemon.log"); };
>>>> -destination d_kern { file("/var/log/kern.log"); };
>>>> -destination d_lpr { file("/var/log/lpr.log"); };
>>>> -destination d_mail { file("/var/log/mail.log"); };
>>>> -destination d_syslog { file("/var/log/syslog"); };
>>>> -destination d_user { file("/var/log/user.log"); };
>>>> -destination d_uucp { file("/var/log/uucp.log"); };
>>>> -
>>>> -# This files are the log come from the mail subsystem.
>>>> -#
>>>> -destination d_mailinfo { file("/var/log/mail/mail.info"); };
>>>> -destination d_mailwarn { file("/var/log/mail/mail.warn"); };
>>>> -destination d_mailerr { file("/var/log/mail/mail.err"); };
>>>> -
>>>> -# Logging for INN news system
>>>> -#
>>>> -destination d_newscrit { file("/var/log/news/news.crit"); };
>>>> -destination d_newserr { file("/var/log/news/news.err"); };
>>>> -destination d_newsnotice { file("/var/log/news/news.notice"); };
>>>> -
>>>> -# Some 'catch-all' logfiles.
>>>> -#
>>>> -destination d_debug { file("/var/log/debug"); };
>>>> -destination d_error { file("/var/log/error"); };
>>>> -destination d_messages { file("/var/log/messages"); };
>>>> -
>>>> -# The root's console.
>>>> -#
>>>> -destination d_console { usertty("root"); };
>>>> -
>>>> -# Virtual console.
>>>> -#
>>>> -destination d_console_all { file("/dev/tty10"); };
>>>> -
>>>> -# The named pipe /dev/xconsole is for the nsole' utility. To use it,
>>>> -# you must invoke nsole' with the -file' option:
>>>> -#
>>>> -# $ xconsole -file /dev/xconsole [...]
>>>> -#
>>>> -destination d_xconsole { pipe("/dev/xconsole"); };
>>>> -
>>>> -# Send the messages to an other host
>>>> -#
>>>> -#destination d_net { tcp("127.0.0.1" port(1000) authentication(on) encrypt(on) log_fifo_size(1000)); };
>>>> -
>>>> -# Debian only
>>>> -destination d_ppp { file("/var/log/ppp.log"); };
>>>> -
>>>> -########################
>>>> -# Filters
>>>> -########################
>>>> -# Here's come the filter options. With this rules, we can set which
>>>> -# message go where.
>>>> -
>>>> -filter f_dbg { level(debug); };
>>>> -filter f_info { level(info); };
>>>> -filter f_notice { level(notice); };
>>>> -filter f_warn { level(warn); };
>>>> -filter f_err { level(err); };
>>>> -filter f_crit { level(crit .. emerg); };
>>>> -
>>>> -filter f_debug { level(debug) and not facility(auth, authpriv, news, mail); };
>>>> -filter f_error { level(err .. emerg) ; };
>>>> -filter f_messages { level(info,notice,warn) and
>>>> - not facility(auth,authpriv,cron,daemon,mail,news); };
>>>> -
>>>> -filter f_auth { facility(auth, authpriv) and not filter(f_debug); };
>>>> -filter f_cron { facility(cron) and not filter(f_debug); };
>>>> -filter f_daemon { facility(daemon) and not filter(f_debug); };
>>>> -filter f_kern { facility(kern) and not filter(f_debug); };
>>>> -filter f_lpr { facility(lpr) and not filter(f_debug); };
>>>> -filter f_local { facility(local0, local1, local3, local4, local5,
>>>> - local6, local7) and not filter(f_debug); };
>>>> -filter f_mail { facility(mail) and not filter(f_debug); };
>>>> -filter f_news { facility(news) and not filter(f_debug); };
>>>> -filter f_syslog3 { not facility(auth, authpriv, mail) and not filter(f_debug); };
>>>> -filter f_user { facility(user) and not filter(f_debug); };
>>>> -filter f_uucp { facility(uucp) and not filter(f_debug); };
>>>> -
>>>> -filter f_cnews { level(notice, err, crit) and facility(news); };
>>>> -filter f_cother { level(debug, info, notice, warn) or facility(daemon, mail); };
>>>> -
>>>> -filter f_ppp { facility(local2) and not filter(f_debug); };
>>>> -filter f_console { level(warn .. emerg); };
>>>> -
>>>> -########################
>>>> -# Log paths
>>>> -########################
>>>> -log { source(s_src); filter(f_auth); destination(d_auth); };
>>>> -log { source(s_src); filter(f_cron); destination(d_cron); };
>>>> -log { source(s_src); filter(f_daemon); destination(d_daemon); };
>>>> -log { source(s_src); filter(f_kern); destination(d_kern); };
>>>> -log { source(s_src); filter(f_lpr); destination(d_lpr); };
>>>> -log { source(s_src); filter(f_syslog3); destination(d_syslog); };
>>>> -log { source(s_src); filter(f_user); destination(d_user); };
>>>> -log { source(s_src); filter(f_uucp); destination(d_uucp); };
>>>> -
>>>> -log { source(s_src); filter(f_mail); destination(d_mail); };
>>>> -#log { source(s_src); filter(f_mail); filter(f_info); destination(d_mailinfo); };
>>>> -#log { source(s_src); filter(f_mail); filter(f_warn); destination(d_mailwarn); };
>>>> -#log { source(s_src); filter(f_mail); filter(f_err); destination(d_mailerr); };
>>>> -
>>>> -log { source(s_src); filter(f_news); filter(f_crit); destination(d_newscrit); };
>>>> -log { source(s_src); filter(f_news); filter(f_err); destination(d_newserr); };
>>>> -log { source(s_src); filter(f_news); filter(f_notice); destination(d_newsnotice); };
>>>> -#log { source(s_src); filter(f_cnews); destination(d_console_all); };
>>>> -#log { source(s_src); filter(f_cother); destination(d_console_all); };
>>>> -
>>>> -#log { source(s_src); filter(f_ppp); destination(d_ppp); };
>>>> -
>>>> -log { source(s_src); filter(f_debug); destination(d_debug); };
>>>> -log { source(s_src); filter(f_error); destination(d_error); };
>>>> -log { source(s_src); filter(f_messages); destination(d_messages); };
>>>> -
>>>> -log { source(s_src); filter(f_console); destination(d_console_all);
>>>> - destination(d_xconsole); };
>>>> -log { source(s_src); filter(f_crit); destination(d_console); };
>>>> -
>>>> -# All messages send to a remote site
>>>> -#
>>>> -#log { source(s_src); destination(d_net); };
>>>> diff --git a/meta-oe/recipes-support/syslog-ng/files/syslog-ng.conf.systemd b/meta-oe/recipes-support/syslog-ng/files/syslog-ng.conf.systemd
>>>> new file mode 100644
>>>> index 0000000..d21fa1f
>>>> --- /dev/null
>>>> +++ b/meta-oe/recipes-support/syslog-ng/files/syslog-ng.conf.systemd
>>>> @@ -0,0 +1,157 @@
>>>> + at version: 3.8
>>>> +#
>>>> +# Syslog-ng configuration file, compatible with default Debian syslogd
>>>> +# installation. Originally written by anonymous (I can't find his name)
>>>> +# Revised, and rewrited by me (SZALAY Attila <sasa at debian.org>)
>>>> +
>>>> +# First, set some global options.
>>>> +options { chain_hostnames(off); flush_lines(0); use_dns(no); use_fqdn(no);
>>>> + owner("root"); group("adm"); perm(0640); stats_freq(0);
>>>> + bad_hostname("^gconfd$");
>>>> +};
>>>> +
>>>> +########################
>>>> +# Sources
>>>> +########################
>>>> +# This is the default behavior of sysklogd package
>>>> +# Logs may come from unix stream, but not from another machine.
>>>> +#
>>>> +source s_src {
>>>> + systemd-journal();
>>>> + file("/proc/kmsg" program-override("kernel"));
>>>> + internal();
>>>> +};
>>>> +
>>>> +# If you wish to get logs from remote machine you should uncomment
>>>> +# this and comment the above source line.
>>>> +#
>>>> +#source s_net { tcp(ip(127.0.0.1) port(1000) authentication(required) encrypt(allow)); };
>>>> +
>>>> +########################
>>>> +# Destinations
>>>> +########################
>>>> +# First some standard logfile
>>>> +#
>>>> +destination d_auth { file("/var/log/auth.log"); };
>>>> +destination d_cron { file("/var/log/cron.log"); };
>>>> +destination d_daemon { file("/var/log/daemon.log"); };
>>>> +destination d_kern { file("/var/log/kern.log"); };
>>>> +destination d_lpr { file("/var/log/lpr.log"); };
>>>> +destination d_mail { file("/var/log/mail.log"); };
>>>> +destination d_syslog { file("/var/log/syslog"); };
>>>> +destination d_user { file("/var/log/user.log"); };
>>>> +destination d_uucp { file("/var/log/uucp.log"); };
>>>> +
>>>> +# This files are the log come from the mail subsystem.
>>>> +#
>>>> +destination d_mailinfo { file("/var/log/mail/mail.info"); };
>>>> +destination d_mailwarn { file("/var/log/mail/mail.warn"); };
>>>> +destination d_mailerr { file("/var/log/mail/mail.err"); };
>>>> +
>>>> +# Logging for INN news system
>>>> +#
>>>> +destination d_newscrit { file("/var/log/news/news.crit"); };
>>>> +destination d_newserr { file("/var/log/news/news.err"); };
>>>> +destination d_newsnotice { file("/var/log/news/news.notice"); };
>>>> +
>>>> +# Some 'catch-all' logfiles.
>>>> +#
>>>> +destination d_debug { file("/var/log/debug"); };
>>>> +destination d_error { file("/var/log/error"); };
>>>> +destination d_messages { file("/var/log/messages"); };
>>>> +
>>>> +# The root's console.
>>>> +#
>>>> +destination d_console { usertty("root"); };
>>>> +
>>>> +# Virtual console.
>>>> +#
>>>> +destination d_console_all { file("/dev/tty10"); };
>>>> +
>>>> +# The named pipe /dev/xconsole is for the nsole' utility. To use it,
>>>> +# you must invoke nsole' with the -file' option:
>>>> +#
>>>> +# $ xconsole -file /dev/xconsole [...]
>>>> +#
>>>> +destination d_xconsole { pipe("/dev/xconsole"); };
>>>> +
>>>> +# Send the messages to an other host
>>>> +#
>>>> +#destination d_net { tcp("127.0.0.1" port(1000) authentication(on) encrypt(on) log_fifo_size(1000)); };
>>>> +
>>>> +# Debian only
>>>> +destination d_ppp { file("/var/log/ppp.log"); };
>>>> +
>>>> +########################
>>>> +# Filters
>>>> +########################
>>>> +# Here's come the filter options. With this rules, we can set which
>>>> +# message go where.
>>>> +
>>>> +filter f_dbg { level(debug); };
>>>> +filter f_info { level(info); };
>>>> +filter f_notice { level(notice); };
>>>> +filter f_warn { level(warn); };
>>>> +filter f_err { level(err); };
>>>> +filter f_crit { level(crit .. emerg); };
>>>> +
>>>> +filter f_debug { level(debug) and not facility(auth, authpriv, news, mail); };
>>>> +filter f_error { level(err .. emerg) ; };
>>>> +filter f_messages { level(info,notice,warn) and
>>>> + not facility(auth,authpriv,cron,daemon,mail,news); };
>>>> +
>>>> +filter f_auth { facility(auth, authpriv) and not filter(f_debug); };
>>>> +filter f_cron { facility(cron) and not filter(f_debug); };
>>>> +filter f_daemon { facility(daemon) and not filter(f_debug); };
>>>> +filter f_kern { facility(kern) and not filter(f_debug); };
>>>> +filter f_lpr { facility(lpr) and not filter(f_debug); };
>>>> +filter f_local { facility(local0, local1, local3, local4, local5,
>>>> + local6, local7) and not filter(f_debug); };
>>>> +filter f_mail { facility(mail) and not filter(f_debug); };
>>>> +filter f_news { facility(news) and not filter(f_debug); };
>>>> +filter f_syslog3 { not facility(auth, authpriv, mail) and not filter(f_debug); };
>>>> +filter f_user { facility(user) and not filter(f_debug); };
>>>> +filter f_uucp { facility(uucp) and not filter(f_debug); };
>>>> +
>>>> +filter f_cnews { level(notice, err, crit) and facility(news); };
>>>> +filter f_cother { level(debug, info, notice, warn) or facility(daemon, mail); };
>>>> +
>>>> +filter f_ppp { facility(local2) and not filter(f_debug); };
>>>> +filter f_console { level(warn .. emerg); };
>>>> +
>>>> +########################
>>>> +# Log paths
>>>> +########################
>>>> +log { source(s_src); filter(f_auth); destination(d_auth); };
>>>> +log { source(s_src); filter(f_cron); destination(d_cron); };
>>>> +log { source(s_src); filter(f_daemon); destination(d_daemon); };
>>>> +log { source(s_src); filter(f_kern); destination(d_kern); };
>>>> +log { source(s_src); filter(f_lpr); destination(d_lpr); };
>>>> +log { source(s_src); filter(f_syslog3); destination(d_syslog); };
>>>> +log { source(s_src); filter(f_user); destination(d_user); };
>>>> +log { source(s_src); filter(f_uucp); destination(d_uucp); };
>>>> +
>>>> +log { source(s_src); filter(f_mail); destination(d_mail); };
>>>> +#log { source(s_src); filter(f_mail); filter(f_info); destination(d_mailinfo); };
>>>> +#log { source(s_src); filter(f_mail); filter(f_warn); destination(d_mailwarn); };
>>>> +#log { source(s_src); filter(f_mail); filter(f_err); destination(d_mailerr); };
>>>> +
>>>> +log { source(s_src); filter(f_news); filter(f_crit); destination(d_newscrit); };
>>>> +log { source(s_src); filter(f_news); filter(f_err); destination(d_newserr); };
>>>> +log { source(s_src); filter(f_news); filter(f_notice); destination(d_newsnotice); };
>>>> +#log { source(s_src); filter(f_cnews); destination(d_console_all); };
>>>> +#log { source(s_src); filter(f_cother); destination(d_console_all); };
>>>> +
>>>> +#log { source(s_src); filter(f_ppp); destination(d_ppp); };
>>>> +
>>>> +log { source(s_src); filter(f_debug); destination(d_debug); };
>>>> +log { source(s_src); filter(f_error); destination(d_error); };
>>>> +log { source(s_src); filter(f_messages); destination(d_messages); };
>>>> +
>>>> +log { source(s_src); filter(f_console); destination(d_console_all);
>>>> + destination(d_xconsole); };
>>>> +log { source(s_src); filter(f_crit); destination(d_console); };
>>>> +
>>>> +# All messages send to a remote site
>>>> +#
>>>> +#log { source(s_src); destination(d_net); };
>>>> diff --git a/meta-oe/recipes-support/syslog-ng/files/syslog-ng.conf.sysvinit b/meta-oe/recipes-support/syslog-ng/files/syslog-ng.conf.sysvinit
>>>> new file mode 100644
>>>> index 0000000..4a059d4
>>>> --- /dev/null
>>>> +++ b/meta-oe/recipes-support/syslog-ng/files/syslog-ng.conf.sysvinit
>>>> @@ -0,0 +1,155 @@
>>>> + at version: 3.8
>>>> +#
>>>> +# Syslog-ng configuration file, compatible with default Debian syslogd
>>>> +# installation. Originally written by anonymous (I can't find his name)
>>>> +# Revised, and rewrited by me (SZALAY Attila <sasa at debian.org>)
>>>> +
>>>> +# First, set some global options.
>>>> +options { chain_hostnames(off); flush_lines(0); use_dns(no); use_fqdn(no);
>>>> + owner("root"); group("adm"); perm(0640); stats_freq(0);
>>>> + bad_hostname("^gconfd$");
>>>> +};
>>>> +
>>>> +########################
>>>> +# Sources
>>>> +########################
>>>> +# This is the default behavior of sysklogd package
>>>> +# Logs may come from unix stream, but not from another machine.
>>>> +#
>>>> +source s_src { unix-dgram("/dev/log"); internal();
>>>> + file("/proc/kmsg" program_override("kernel"));
>>>> +};
>>>> +
>>>> +# If you wish to get logs from remote machine you should uncomment
>>>> +# this and comment the above source line.
>>>> +#
>>>> +#source s_net { tcp(ip(127.0.0.1) port(1000) authentication(required) encrypt(allow)); };
>>>> +
>>>> +########################
>>>> +# Destinations
>>>> +########################
>>>> +# First some standard logfile
>>>> +#
>>>> +destination d_auth { file("/var/log/auth.log"); };
>>>> +destination d_cron { file("/var/log/cron.log"); };
>>>> +destination d_daemon { file("/var/log/daemon.log"); };
>>>> +destination d_kern { file("/var/log/kern.log"); };
>>>> +destination d_lpr { file("/var/log/lpr.log"); };
>>>> +destination d_mail { file("/var/log/mail.log"); };
>>>> +destination d_syslog { file("/var/log/syslog"); };
>>>> +destination d_user { file("/var/log/user.log"); };
>>>> +destination d_uucp { file("/var/log/uucp.log"); };
>>>> +
>>>> +# This files are the log come from the mail subsystem.
>>>> +#
>>>> +destination d_mailinfo { file("/var/log/mail/mail.info"); };
>>>> +destination d_mailwarn { file("/var/log/mail/mail.warn"); };
>>>> +destination d_mailerr { file("/var/log/mail/mail.err"); };
>>>> +
>>>> +# Logging for INN news system
>>>> +#
>>>> +destination d_newscrit { file("/var/log/news/news.crit"); };
>>>> +destination d_newserr { file("/var/log/news/news.err"); };
>>>> +destination d_newsnotice { file("/var/log/news/news.notice"); };
>>>> +
>>>> +# Some 'catch-all' logfiles.
>>>> +#
>>>> +destination d_debug { file("/var/log/debug"); };
>>>> +destination d_error { file("/var/log/error"); };
>>>> +destination d_messages { file("/var/log/messages"); };
>>>> +
>>>> +# The root's console.
>>>> +#
>>>> +destination d_console { usertty("root"); };
>>>> +
>>>> +# Virtual console.
>>>> +#
>>>> +destination d_console_all { file("/dev/tty10"); };
>>>> +
>>>> +# The named pipe /dev/xconsole is for the nsole' utility. To use it,
>>>> +# you must invoke nsole' with the -file' option:
>>>> +#
>>>> +# $ xconsole -file /dev/xconsole [...]
>>>> +#
>>>> +destination d_xconsole { pipe("/dev/xconsole"); };
>>>> +
>>>> +# Send the messages to an other host
>>>> +#
>>>> +#destination d_net { tcp("127.0.0.1" port(1000) authentication(on) encrypt(on) log_fifo_size(1000)); };
>>>> +
>>>> +# Debian only
>>>> +destination d_ppp { file("/var/log/ppp.log"); };
>>>> +
>>>> +########################
>>>> +# Filters
>>>> +########################
>>>> +# Here's come the filter options. With this rules, we can set which
>>>> +# message go where.
>>>> +
>>>> +filter f_dbg { level(debug); };
>>>> +filter f_info { level(info); };
>>>> +filter f_notice { level(notice); };
>>>> +filter f_warn { level(warn); };
>>>> +filter f_err { level(err); };
>>>> +filter f_crit { level(crit .. emerg); };
>>>> +
>>>> +filter f_debug { level(debug) and not facility(auth, authpriv, news, mail); };
>>>> +filter f_error { level(err .. emerg) ; };
>>>> +filter f_messages { level(info,notice,warn) and
>>>> + not facility(auth,authpriv,cron,daemon,mail,news); };
>>>> +
>>>> +filter f_auth { facility(auth, authpriv) and not filter(f_debug); };
>>>> +filter f_cron { facility(cron) and not filter(f_debug); };
>>>> +filter f_daemon { facility(daemon) and not filter(f_debug); };
>>>> +filter f_kern { facility(kern) and not filter(f_debug); };
>>>> +filter f_lpr { facility(lpr) and not filter(f_debug); };
>>>> +filter f_local { facility(local0, local1, local3, local4, local5,
>>>> + local6, local7) and not filter(f_debug); };
>>>> +filter f_mail { facility(mail) and not filter(f_debug); };
>>>> +filter f_news { facility(news) and not filter(f_debug); };
>>>> +filter f_syslog3 { not facility(auth, authpriv, mail) and not filter(f_debug); };
>>>> +filter f_user { facility(user) and not filter(f_debug); };
>>>> +filter f_uucp { facility(uucp) and not filter(f_debug); };
>>>> +
>>>> +filter f_cnews { level(notice, err, crit) and facility(news); };
>>>> +filter f_cother { level(debug, info, notice, warn) or facility(daemon, mail); };
>>>> +
>>>> +filter f_ppp { facility(local2) and not filter(f_debug); };
>>>> +filter f_console { level(warn .. emerg); };
>>>> +
>>>> +########################
>>>> +# Log paths
>>>> +########################
>>>> +log { source(s_src); filter(f_auth); destination(d_auth); };
>>>> +log { source(s_src); filter(f_cron); destination(d_cron); };
>>>> +log { source(s_src); filter(f_daemon); destination(d_daemon); };
>>>> +log { source(s_src); filter(f_kern); destination(d_kern); };
>>>> +log { source(s_src); filter(f_lpr); destination(d_lpr); };
>>>> +log { source(s_src); filter(f_syslog3); destination(d_syslog); };
>>>> +log { source(s_src); filter(f_user); destination(d_user); };
>>>> +log { source(s_src); filter(f_uucp); destination(d_uucp); };
>>>> +
>>>> +log { source(s_src); filter(f_mail); destination(d_mail); };
>>>> +#log { source(s_src); filter(f_mail); filter(f_info); destination(d_mailinfo); };
>>>> +#log { source(s_src); filter(f_mail); filter(f_warn); destination(d_mailwarn); };
>>>> +#log { source(s_src); filter(f_mail); filter(f_err); destination(d_mailerr); };
>>>> +
>>>> +log { source(s_src); filter(f_news); filter(f_crit); destination(d_newscrit); };
>>>> +log { source(s_src); filter(f_news); filter(f_err); destination(d_newserr); };
>>>> +log { source(s_src); filter(f_news); filter(f_notice); destination(d_newsnotice); };
>>>> +#log { source(s_src); filter(f_cnews); destination(d_console_all); };
>>>> +#log { source(s_src); filter(f_cother); destination(d_console_all); };
>>>> +
>>>> +#log { source(s_src); filter(f_ppp); destination(d_ppp); };
>>>> +
>>>> +log { source(s_src); filter(f_debug); destination(d_debug); };
>>>> +log { source(s_src); filter(f_error); destination(d_error); };
>>>> +log { source(s_src); filter(f_messages); destination(d_messages); };
>>>> +
>>>> +log { source(s_src); filter(f_console); destination(d_console_all);
>>>> + destination(d_xconsole); };
>>>> +log { source(s_src); filter(f_crit); destination(d_console); };
>>>> +
>>>> +# All messages send to a remote site
>>>> +#
>>>> +#log { source(s_src); destination(d_net); };
>>>> diff --git a/meta-oe/recipes-support/syslog-ng/files/syslog-ng.service-the-syslog-ng-service.patch b/meta-oe/recipes-support/syslog-ng/files/syslog-ng.service-the-syslog-ng-service.patch
>>>> index 6b30c20..1a11ea8 100644
>>>> --- a/meta-oe/recipes-support/syslog-ng/files/syslog-ng.service-the-syslog-ng-service.patch
>>>> +++ b/meta-oe/recipes-support/syslog-ng/files/syslog-ng.service-the-syslog-ng-service.patch
>>>> @@ -21,7 +21,7 @@ index fc16f8d..8e09deb 100644
>>>> Type=notify
>>>> -ExecStart=/usr/sbin/syslog-ng -F $SYSLOGNG_OPTS
>>>> -ExecReload=/bin/kill -HUP $MAINPID
>>>> -+ExecStart=@SBINDIR@/syslog-ng -F $SYSLOGNG_OPTS -p @LOCALSTATEDIR@/run/syslogd.pid
>>>> ++ExecStart=@SBINDIR@/syslog-ng -F $SYSLOGNG_OPTS
>>>> +ExecReload=@BASEBINDIR@/kill -HUP $MAINPID
>>>> EnvironmentFile=-/etc/default/syslog-ng
>>>> EnvironmentFile=-/etc/sysconfig/syslog-ng
>>>> diff --git a/meta-oe/recipes-support/syslog-ng/syslog-ng.inc b/meta-oe/recipes-support/syslog-ng/syslog-ng.inc
>>>> index cb7ca31..feb2882 100644
>>>> --- a/meta-oe/recipes-support/syslog-ng/syslog-ng.inc
>>>> +++ b/meta-oe/recipes-support/syslog-ng/syslog-ng.inc
>>>> @@ -16,7 +16,8 @@ LIC_FILES_CHKSUM = "file://COPYING;md5=24c0c5cb2c83d9f2ab725481e4df5240"
>>>> DEPENDS = "libpcre flex eventlog glib-2.0 openssl util-linux"
>>>>
>>>> SRC_URI = "https://github.com/balabit/syslog-ng/releases/download/${BP}/${BP}.tar.gz \
>>>> - file://syslog-ng.conf \
>>>> + file://syslog-ng.conf.systemd \
>>>> + file://syslog-ng.conf.sysvinit \
>>>> file://initscript \
>>>> file://volatiles.03_syslog-ng \
>>>> file://configure.ac-add-option-enable-thread-tls-to-manage-.patch \
>>>> @@ -38,7 +39,6 @@ EXTRA_OECONF = " \
>>>> --with-librabbitmq-client=no \
>>>> --disable-python \
>>>> --disable-java --disable-java-modules \
>>>> - --with-pidfile-dir=${localstatedir}/run/${BPN} \
>>>> ${CONFIG_TLS} \
>>>> "
>>>>
>>>> @@ -77,7 +77,11 @@ do_install_prepend() {
>>>>
>>>> do_install_append() {
>>>> install -d ${D}/${sysconfdir}/${BPN}
>>>> - install ${WORKDIR}/syslog-ng.conf ${D}${sysconfdir}/${BPN}/${BPN}.conf
>>>> + if ${@bb.utils.contains('DISTRO_FEATURES','systemd','true','false',d)};then
>>>> + install ${WORKDIR}/syslog-ng.conf.systemd ${D}${sysconfdir}/${BPN}/${BPN}.conf
>>>> + else
>>>> + install ${WORKDIR}/syslog-ng.conf.sysvinit ${D}${sysconfdir}/${BPN}/${BPN}.conf
>>>> + fi
>>>> install -d ${D}/${sysconfdir}/init.d
>>>> install -m 755 ${WORKDIR}/initscript ${D}/${sysconfdir}/init.d/syslog
>>>> install -d ${D}/${sysconfdir}/default/volatiles/
>>>> --
>>>> 2.7.4
>>>>
>>>> --
>>>> _______________________________________________
>>>> Openembedded-devel mailing list
>>>> Openembedded-devel at lists.openembedded.org
>>>> http://lists.openembedded.org/mailman/listinfo/openembedded-devel
>> --
>> BRs
>>
>> Sandy(Li Changqing)
>> +861084778653
>>
--
BRs
Sandy(Li Changqing)
+861084778653
More information about the Openembedded-devel
mailing list