[oe] Allow choose of U-Boot config for machine

[JH]

Fixed, thank you

On 7/2/19, JH <jupiter.hce at gmail.com> wrote:
> ERROR: Unable to start bitbake server (None)
> --- Starting bitbake server pid 2673 at 2019-07-02 11:54:24.011086 ---
> ERROR: local.conf:34: unparsed line: 'UBOOT_CONFIG=nand'
>
>
> On 7/2/19, JH <jupiter.hce at gmail.com> wrote:
>> Tried to add  UBOOT_CONFIG=nand to local.conf and from command line,
>> bitbake does not like it????
>>
>> On 7/2/19, JH <jupiter.hce at gmail.com> wrote:
>>> Hi,
>>>
>>> I am running BitBake Build Tool Core version 1.40.0, originally I
>>> built an image on imx6ullevk booting from SD card, I am building a new
>>> image for a customized i.MX6ULL board booting from NAND. The following
>>> link commented by Otavio Salvador for a patch to allow user to use
>>> UBOOT_CONFIG=nand either in local.conf or command line. Given the
>>> patch was many years old, I think that the current version is able to
>>> support UBOOT_CONFIG=nand either in local.conf or command line, there
>>> is no need to run the patch, is that correct?
>>>
>>> http://lists.openembedded.org/pipermail/openembedded-core/2013-August/082284.html
>>>
>>> Thank you.
>>>
>>> Kind regards,
>>>
>>> - JH
>>>
>>
>