[oe-issues] [Bug 2229] spitz hard locks X/GPE when changing terminals with FN keys

[bugzilla-daemon at tinman.treke.net]

http://bugs.openembedded.org/show_bug.cgi?id=2229





--- Comment #4 from Lukas Gorris <lukas.gorris at gmx.de>  2007-07-08 18:03:31 ---
(In reply to comment #0)
> When attempting to change terminals at the login screen via FN+left or FN+right
> machine will hard lock after changing terminals more than 3 times in the same
> direction, 4 times in any direction (gpe-login to text login and back to
> gpe-login), or if you change from the blank terminal to an x-session.
> 
> Steps to reproduce with FN+left:
> 1). Reboot your Z or logout.
> 2). Press FN+left once. This will bring you to a terminal login (text).
> 3). Press FN+left once. This will bring you to a blank screen (with a dash at
> the top).
> 3). Press FN+left once. This should bring you back to the gpe-login screen,
> instead it hard locks the machine. If you change back to the text console and
> then to the gpe-login x-session (via FN+right), X will crash and reload the
> gpe-login screen.
> 
> Note that I used the battery reset switch & recovery console to run fsck on
> partitions after each test.
> 
> Used Angstrom-x11-image-test-20070422-spitz.rootfs.tar.gz as install media on
> machine spitz (slc-3000), fresh ipkg update;ipkg upgrade performed as of bug
> report.
> 

this is not spitz but akita here. I can't switch to terminals with
fn+left/right at all while logged in to gpe


-- 
Configure bugmail: http://bugs.openembedded.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.