[oe-issues] [Bug 3192] New: Linksys WCF-11 Card works on OZ Opie, but not Angstrom

[bugzilla-daemon at tinman.treke.net]

http://bugs.openembedded.org/show_bug.cgi?id=3192

           Summary: Linksys WCF-11 Card works on OZ Opie, but not Angstrom
           Product: Zaurus Kernel
           Version: unspecified
          Platform: Other
        OS/Version: All
            Status: NEW
          Severity: major
          Priority: P2
         Component: C3xxx
        AssignedTo: openembedded-issues at lists.openembedded.org
        ReportedBy: tbayne at tbayne.net


My Hardware
  Zaurus 3100c
  Linksys WCF11 Wireless CF Card

I have confirmed this configuration works on OZ.

On Angstrom Spitz
(Angstrom-x11-pimlico-image-glibc-ipk-2007.9-test-20071017-spitz-installkit.tgz),
having removed Orinoco, and doing a modprobe on hostap_cs, rebooting, then
inserting the card does NOT result in a wlan0 being available.

I ran "pccardctl ident" and got this output:
[---------------------------------------------------------------------------------
Socket 1:
  product info: "The Linksys Group, Inc.", "Wireless Network CF Card",
"ISL37300P", "RevA"
  manfid: 0x0274, 0x3301
  function: 6 (network)
----------------------------------------------------------------------------------]

During the confirmation of the configuration on OZ I collected the following
information, I hope it helps:

First the dmesg output showing the card working with the hostap driver
(abbreviated):
-------------------------------------------------------------------------------------------------------------------
hostap_cs: Driver unloaded
pccard: PCMCIA card inserted into slot 1
pcmcia: registering new device pcmcia1.0
hostap_cs: 0.4.4-kernel (Jouni Malinen <jkmaline at cc.hut.fi>)
hostap_cs: setting Vcc=33 (constant)
hostap_cs: ignoring Vcc=33 (from config)
Checking CFTABLE_ENTRY 0x01 (default 0x01)
IO window settings: cfg->io.nwin=1 dflt.io.nwin=1
io->flags = 0x0046, io.base=0x0000, len=64
hostap_cs: Registered netdevice wifi0
hostap_cs: index 0x01: Vcc 3.3, irq 137, io 0xc4840000-0xc484003f
prism2_hw_init: initialized in 200 ms
wifi0: NIC: id=0x800c v1.0.0
wifi0: PRI: id=0x15 v1.0.4
wifi0: STA: id=0x1f v1.0.3
wifi0: defaulting to bogus WDS frame as a workaround for firmware bug in Host
AP mode WDS
wifi0: registered netdevice wlan0
ADDRCONF(NETDEV_UP): wifi0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wifi0: LinkStatus=1 (Connected)
wifi0: LinkStatus: BSSID=00:0f:66:52:43:cb
ADDRCONF(NETDEV_CHANGE): wifi0: link becomes ready
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: no IPv6 routers present
-------------------------------------------------------------------------------------------------------------------

The output from the (pc)cardctrl ident program (abbreviated):
-------------------------------------------------------------------------------------------------------------------
Socket 1:
product info: "The Linksys Group, Inc.", "Wireless Network CF Card",
"ISL37300P", "RevA"
manfid: 0x0274, 0x3301
function: 6 (network)
-------------------------------------------------------------------------------------------------------------------

The /etc/modutils/hostap_cs.conf file:
-------------------------------------------------------------------------------------------------------------------
# product info: "Pretec", "CompactWLAN Card 802.11b", "2.5"
pcmcia:m0156c0002f06fn00pfn00pa1CADD3E5pbE697636Cpc7A5BFCF1pd00000000 hostap_cs

# manufacturer ID which exist in orinoco_cs AND in hostap_cs
pcmcia:m000Bc7100f06fn00pfn00pa*pb*pc*pd* hostap_cs
pcmcia:m000Bc7300f06fn00pfn00pa*pb*pc*pd* hostap_cs
pcmcia:m0126c8000f06fn00pfn00pa*pb*pc*pd* hostap_cs
pcmcia:m0138c0002f06fn00pfn00pa*pb*pc*pd* hostap_cs
pcmcia:m0250c0002f06fn00pfn00pa*pb*pc*pd* hostap_cs
pcmcia:m0274c1612f06fn00pfn00pa*pb*pc*pd* hostap_cs
pcmcia:m0274c1613f06fn00pfn00pa*pb*pc*pd* hostap_cs
pcmcia:m028Ac0002f06fn00pfn00pa*pb*pc*pd* hostap_cs
pcmcia:m02AAc0002f06fn00pfn00pa*pb*pc*pd* hostap_cs
pcmcia:m50C2c7300f06fn00pfn00pa*pb*pc*pd* hostap_cs
pcmcia:mD601c0002f06fn00pfn00pa*pb*pc*pd* hostap_cs
pcmcia:mD601c0005f06fn00pfn00pa*pb*pc*pd* hostap_cs

# product info: "Linksys", "Wireless CompactFlash Card", "", ""
pcmcia:m028Ac0673f06fn00pfn00pa0733CC81pb0C52F395pc00000000pd00000000 hostap_cs

# product info:"PLANEX COMMUNICATION INC","PLANEX GW-CF11X Wireless CF Card",
"", ""
pcmcia:mD601c0010f06fn00pfn00pa4703CF68pbFAD7318Dpc00000000pd00000000 hostap_cs

# 0x0156, 0x0002 and "Version 01.02" only appear for Prism based cards.
pcmcia:m0156c0002f06fn00pfn00pa*pb*pc4B74BAA0pd00000000 hostap_cs

# "BUFFALO", "WLI-CF-S11G", "", ""
pcmcia:m026Fc030Bf06fn00pfn00pa2DECECE3pb82067C18pc00000000pd00000000 hostap_cs
-------------------------------------------------------------------------------------------------------------------

The /etc/pcmcia/hostap_cs.conf file (abbreviated)
-------------------------------------------------------------------------------------------------------------------
card "Linksys WCF11 11Mbps 802.11b WLAN Card"
   manfid 0x0274, 0x3301                                  
   bind "hostap_cs"
-------------------------------------------------------------------------------------------------------------------

The /etc/network/interfaces file (abbreviated):
-------------------------------------------------------------------------------------------------------------------
# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)

# The loopback interface
auto lo wlan0
iface lo inet loopback

# Wireless interfaces
iface wlan0 inet dhcp
        wireless_key FFFFFFFFFFFFFFFFFFFFFFFFFF [1]  [2]  [3]  [4] open key [1]
        wireless_mode Infrastructure
        wireless_essid MYWIFI
iface atml0 inet dhcp

# Wired or wireless interfaces
iface eth0 inet dhcp
iface eth1 inet dhcp
-------------------------------------------------------------------------------------------------------------------

And finally the lsmod output (abbreviated):
-------------------------------------------------------------------------------------------------------------------
hostap_cs              56596  3
hostap                112804  1 hostap_cs
ieee80211_crypt         5056  2 ieee80211_crypt_wep,hostap
-------------------------------------------------------------------------------------------------------------------


-- 
Configure bugmail: http://bugs.openembedded.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.