[oe-issues] [Bug 3236] New: hostap drivers do not load for prism card

[bugzilla-daemon at tinman.treke.net]

http://bugs.openembedded.org/show_bug.cgi?id=3236

           Summary: hostap drivers do not load for prism card
           Product: Zaurus Kernel
           Version: unspecified
          Platform: Other
        OS/Version: Linux
            Status: NEW
          Severity: normal
          Priority: P2
         Component: C3xxx
        AssignedTo: openembedded-issues at lists.openembedded.org
        ReportedBy: xdivider at yahoo.com


Hi, just installed the Oct 24 image of angstrom. I was only able to get orinoco
drivers to recognize the card, which is a generic intersil card with firmware
1.8.4. 

here's the output from lspcmcia
Socket 1 Bridge:        [pxa2xx-pcmcia]         (bus ID: pxa2xx-pcmcia)
        Configuration:  state: on       ready: yes
                        Voltage: 3.3V Vcc: 3.3V Vpp: 0.0V
Socket 1 Device 0:      [orinoco_cs]            (bus ID: 1.0)
        Configuration:  state: on
        Product Name:   Wireless LAN 11Mbps PC Card Version 01.02 
        Identification: manf_id: 0x0156 card_id: 0x0002
                        function: 6 (network)
                        prod_id(1): "Wireless LAN" (0x4b8870ff)
                        prod_id(2): "11Mbps PC Card" (0x70e946d1)
                        prod_id(3): "Version 01.02" (0x4b74baa0)
                        prod_id(4): --- (---)

before i downloaded the orinoco driver, the socket was not bound to any
drivers, even after hostap_cs was loaded manually. A borrowed Ambicom card was
recognized by the hostap driver automatically. 

Tried to add in entries to recognize 0x0156, 0x0002 but still no go
# product info: "Pretec", "CompactWLAN Card 802.11b", "2.5"
pcmcia:m0156c0002f06fn00pfn00pa1CADD3E5pbE697636Cpc7A5BFCF1pd00000000 hostap_cs

# manufacturer ID which exist in orinoco_cs AND in hostap_cs
pcmcia:m000Bc7100f06fn00pfn00pa*pb*pc*pd* hostap_cs
pcmcia:m000Bc7300f06fn00pfn00pa*pb*pc*pd* hostap_cs
pcmcia:m0126c8000f06fn00pfn00pa*pb*pc*pd* hostap_cs
pcmcia:m0138c0002f06fn00pfn00pa*pb*pc*pd* hostap_cs
pcmcia:m0250c0002f06fn00pfn00pa*pb*pc*pd* hostap_cs
pcmcia:m0274c1612f06fn00pfn00pa*pb*pc*pd* hostap_cs
pcmcia:m0274c1613f06fn00pfn00pa*pb*pc*pd* hostap_cs
pcmcia:m028Ac0002f06fn00pfn00pa*pb*pc*pd* hostap_cs
pcmcia:m02AAc0002f06fn00pfn00pa*pb*pc*pd* hostap_cs
pcmcia:m50C2c7300f06fn00pfn00pa*pb*pc*pd* hostap_cs
pcmcia:mD601c0002f06fn00pfn00pa*pb*pc*pd* hostap_cs
pcmcia:mD601c0005f06fn00pfn00pa*pb*pc*pd* hostap_cs
pcmcia:m0156c0002f06fn*pfn*pa*pb*pc*pd* hostap_cs <-added

# 0x0156, 0x0002 and "Version 01.02" only appear for Prism based cards.
pcmcia:m0156c0002f06fn00pfn00pa4B8870FFpb70E946D1pc4B74BAA0pd00000000 hostap_cs
<- changed to match the card's output

this the the dmesg log after orinoco drivers are installed.
<7>eth1: Hardware identity 801b:0000:0001:0000
<7>eth1: Station identity  001f:0004:0001:0008
<7>eth1: Firmware determined as Intersil 1.8.4
<7>eth1: Ad-hoc demo mode supported
<7>eth1: IEEE standard IBSS ad-hoc mode supported
<7>eth1: WEP supported, 104-bit key
<7>eth1: MAC address 00:90:4B:DC:37:4D
<7>eth1: Station name "Prism  I"
<7>eth1: ready
<7>eth1: orinoco_cs at 1.0, irq 169, io 0xc4840000-0xc484003f


-- 
Configure bugmail: http://bugs.openembedded.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.