[Bug 3236] hostap drivers do not load for prism card

[bugzilla-daemon at treke.net]

http://bugs.openembedded.net/show_bug.cgi?id=3236


John Andrews <theqmann at gmail.com> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
                 CC|                            |theqmann at gmail.com




--- Comment #10 from John Andrews <theqmann at gmail.com>  2008-02-23 18:51:49 ---
Prism1 CF card not working in Collie console-image built today. Heres some
error messages:

on insert:

pccard: PCMCIA card inserted into slot 0
pcmcia: registering new device pcmcia0.0
pcmcia: request for exclusive IRQ could not be fulfilled.
pcmcia: the driver needs updating to supported shared IRQ lines.
eth0: Hardware identity 8000:0001:0000:0000
eth0: Station identity  0021:0002:0002:0001
eth0: Firmware determined as Symbol F3.91-71
eth0: Ad-hoc demo mode supported
eth0: IEEE standard IBSS ad-hoc mode supported
eth0: WEP supported, 104-bit key
eth0: MAC address 00:a0:f8:a0:c6:13
eth0: Station name "Prism  I"
eth0: ready
eth0: spectrum_cs at 0.0, irq 35, io 0xc4860000-0xc4860047

output of lspcmcia:

Socket 0 Bridge:        [sa11x0-pcmcia]         (bus ID: sa11x0-pcmcia)
Socket 0 Device 0:      [spectrum_cs]           (bus ID: 0.0)

output of pccardctl ident:

Socket 0:
  product info: "Symbol", "Spectrum24 LA4100 Series WLAN PC Card", "1.00", ""
  manfid: 0x026c, 0x0001
  function: 6 (network)


-- 
Configure bugmail: http://bugs.openembedded.net/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.