[Bug 4324] jffs2 flash issues LAB/jffs image
bugzilla-daemon at amethyst.openembedded.net
bugzilla-daemon at amethyst.openembedded.net
Mon Jun 2 15:25:18 UTC 2008
http://bugs.openembedded.net/show_bug.cgi?id=4324
--- Comment #7 from udo <udovdh at xs4all.nl> 2008-06-02 17:25:18 ---
Angstrom 2007.12 h2200 ttyS0
h2200 login: PUncompressing
Linux....................................................................................
done, booting the kernel.
Linux version 2.6.15-hh1 (mreimer at sermons.desiringGod.org) (gcc version 3.4.1)
#4 PREEMPT Wed Feb 22 14:53:31 PST 2006
CPU: XScale-PXA255 [69052d06] revision 6 (ARMv5TE)
Machine: HP iPAQ H2200
Warning: bad configuration page, trying to continue
Memory policy: ECC disabled, Data cache writeback
Memory clock: 99.53MHz (*27)
Run Mode clock: 398.13MHz (*4)
Turbo Mode clock: 398.13MHz (*1.0, inactive)
CPU0: D VIVT undefined 5 cache
CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
Built 1 zonelists
Kernel command line: console=ttyS0,115200n8 mem=64M
PID hash table entries: 512 (order: 9, 8192 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 64MB = 64MB total
Memory: 62116KB available (2179K code, 432K data, 80K init)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
hamcop: using irq 104-129 on irq 28
input: samcop ts as /class/input/input0
SAMCOP DMA Driver, (c) 2003-2004 Simtec Electronics
DMA channel 0 at c4904400, irq 120
Initialising wince bootloader suspend workaround
input: pxa2xx-keys as /class/input/input1
NetWinder Floating Point Emulator V0.97 (double precision)
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
Initializing Cryptographic API
io scheduler noop registered
lab: loaded command dummy
lab: loaded command dummymf
lab: loaded command [dummymf]foo
lab: loaded command [dummyso]bar
lab: loaded command [dummyso]baz
lab: loaded command suspend
lab: loaded command dmesg
lab: loaded command debug
lab: loaded command devmem2
lab: loaded command insmod
lab: loaded command rmmod
lab: loaded command partition
lab: loaded command [partition]show
lab: loaded command erasemtd
lab: loaded command copy
lab: loaded command unlink
lab: loaded command rm
lab: loaded copy source [ymodem]
lab: loaded copy source [ymodem-g]
lab: loaded copy destination [xmodem]
lab: loaded copy source [flash]
lab: loaded copy destination [flash]
lab: loaded copy destination [nand]
lab: loaded copy source [fs]
lab: loaded copy destination [fs]
lab: loaded unlink device [fs]
lab: loaded copy source [buf]
lab: loaded copy destination [buf]
lab: loaded command mount
lab: loaded command umount
lab: loaded command mkdir
lab: loaded command armboot
lab: loaded command nanddump
lab: loaded command nandcheck
lab: loaded command showlogo
lab: loaded command run
pxa2xx-uart.0: ttyS0 at MMIO 0x40100000 (irq = 15) is a FFUART
pxa2xx-uart.1: ttyS1 at MMIO 0x40200000 (irq = 14) is a BTUART
pxa2xx-uart.2: ttyS2 at MMIO 0x40700000 (irq = 13) is a STUART
pxa2xx-uart.3: ttyS3 at MMIO 0x41600000 (irq = 0) is a HWUART
Battery interface for iPAQ h2200 series - (c) 2004 Szabolcs Gyurko
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
NAND device: Manufacturer ID: 0xec, Chip ID: 0x75 (Samsung NAND 32MiB 3,3V
8-bit)
Scanning device for bad blocks
Bad eraseblock 27 at 0x0006c000
Bad eraseblock 29 at 0x00074000
Using builtin partition definition
Creating 4 MTD partitions on "NAND 32MiB 3,3V 8-bit":
0x00000000-0x00004000 : "HTC first-stage bootstrap"
0x00004000-0x00028000 : "HTC rescue bootloader"
0x00028000-0x00168000 : "second-stage loader"
0x00168000-0x02000000 : "root fs"
pxa2xx_udc: version 4-May-2005
usb0: Ethernet Gadget, version: May Day 2005
usb0: using pxa2xx_udc, OUT ep2out-bulk IN ep1in-bulk
usb0: MAC 7e:a6:2d:79:f0:14
input: h2200 buttons as /class/input/input2
i2c /dev entries driver
I2C: i2c-0: PXA I2C adapter
Driver for 1-wire Dallas network protocol.
SAMCOP 1-Wire busmaster driver - (c) 2004 Szabolcs Gyurko
1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs
Gyurko
dmabounce: registered device samcop sdi on platform bus
samcop sdi: probe: irq=124 irq_cd=31 dma=0.
samcop sdi: initialisation done.
MediaQ 1188 chip detected, base IRQ 130
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Freeing init memory: 80K
lab: Starting LAB [Linux As Bootloader]
lab: loaded command console
lab: opened device 4:64 on fd 0
lab: running.
LAB - Linux As Bootloader, 2.6.15-hh1
Contact: bootldr at handhelds.org
Copyright (c) 2003-2004 Joshua Wise, Andrew Zabolotny and others.
Based on Linux kernel, which is copyright (c) Linus Torvalds and others.
Partially based on OHH bootldr, which is copyright (c) COMPAQ Computer
Corporation.
This program is provided with NO WARRANTY under the terms of the
GNU General Public License.
>> LAB autoboot starting in 3 seconds - press a key to abortpccard: PCMCIA card inserted into slot 0
pcmcia: registering new device pcmcia0.0
usb0: full speed config #1: 100 mA, Ethernet Gadget, using CDC Ethernet Subset
usb0: full speed config #1: 100 mA, Ethernet Gadget, using CDC Ethernet Subset
hda: KODAK ATA_FLASH, CFA DISK drive
>> LAB autoboot starting in 2 seconds - press a key to abortide0 at 0xc4960000-0xc4960007,0xc496000e on irq 30
hda: max request size: 128KiB
hda: 125952 sectors (64 MB) w/1KiB Cache, CHS=984/4/32
hda: cache flushes not supported
hda: hda1
ide-cs: hda: Vcc = 5.0, Vpp = 0.0
>> LAB autoboot starting in 1 seconds - press a key to abort
>> Booting now.
>> Looking for filesystems...
>> Trying "/dev/mmcblk0p1"... failed
>> Trying "/dev/mmcblk0p2"... failed
>> Trying "/de hda:v/mmcblk0p3"... failed
>> Trying "/dev/mmcblk0p4"... failed
hda1 >> Trying "/dev/hda1"...
ok.
>> Executing labrun... Copying [fs:/mnt/boot/zImage] to [fs:/zImage] ...
ARMBooting NOW: Cmdline root=/dev/hda1 rootdelay=5 console=ttyS0,115200n8
armboot: Placing new kernel into temporary RAM...
armboot: Booting new kernel...
BOOT:Uncompressing
Linux................................................................................
done, booting the kernel.
[ 0.000000] Linux version 2.6.21-hh20 (koen at bitbake) (gcc version 4.1.2) #1
PREEMPT Fri Dec 28 16:09:43 CET 2007
[ 0.000000] CPU: XScale-PXA255 [69052d06] revision 6 (ARMv5TE), cr=0000397f
[ 0.000000] Machine: HP iPAQ H2200
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] Memory clock: 99.53MHz (*27)
[ 0.000000] Run Mode clock: 398.13MHz (*4)
[ 0.000000] Turbo Mode clock: 398.13MHz (*1.0, inactive)
[ 0.000000] CPU0: D VIVT undefined 5 cache
[ 0.000000] CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32
sets
[ 0.000000] CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32
sets
[ 0.000000] Built 1 zonelists. Total pages: 16256
[ 0.000000] Kernel command line: root=/dev/hda1 rootdelay=5
console=ttyS0,115200n8
[ 0.000000] PID hash table entries: 256 (order: 8, 1024 bytes)
[ 0.000000] Console: colour dummy device 80x30
[ 0.080000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.080000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.100000] Memory: 64MB = 64MB total
[ 0.100000] Memory: 62336KB available (2252K code, 239K data, 84K init)
[ 0.330000] Mount-cache hash table entries: 512
[ 0.330000] CPU: Testing write buffer coherency: ok
[ 0.340000] NET: Registered protocol family 16
[ 0.370000] hamcop: using irq 108-133 on irq 28
[ 0.380000] SAMCOP DMA Driver, (c) 2003-2004 Simtec Electronics
[ 0.390000] DMA channel 0 at c4902400, irq 124
[ 0.400000] Time: pxa_timer clocksource has been installed.
[ 0.410000] NET: Registered protocol family 2
[ 0.500000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.500000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.510000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.520000] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.520000] TCP reno registered
[ 0.560000] Initialising wince bootloader suspend workaround
[ 0.570000] PXA CPU frequency change support initialized
[ 0.570000] NetWinder Floating Point Emulator V0.97 (double precision)
[ 0.590000] JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.
[ 0.590000] io scheduler noop registered
[ 0.600000] io scheduler anticipatory registered (default)
[ 0.600000] io scheduler deadline registered
[ 0.610000] Corgi Backlight Driver Initialized.
[ 0.740000] mq11xx: using irq 134-153 on irq 37
[ 0.750000] MediaQ 1188 chip detected, base IRQ 134
[ 0.780000] Console: switching to colour frame buffer device 60x53
[ 0.950000] pxa2xx-uart.0: ttyS0 at MMIO 0x40100000 (irq = 15) is a FFUART
[ 0.960000] pxa2xx-uart.1: ttyS1 at MMIO 0x40200000 (irq = 14) is a BTUART
[ 0.970000] pxa2xx-uart.2: ttyS2 at MMIO 0x40700000 (irq = 13) is a STUART
[ 0.980000] pxa2xx-uart.3: ttyS3 at MMIO 0x41600000 (irq = 0) is a HWUART
[ 0.990000] pxa2xx-ir-serial: Initialized
[ 1.000000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 1.000000] ide: Assuming 50MHz system bus speed for PIO modes; override
with idebus=xx
[ 1.020000] NAND device: Manufacturer ID: 0xec, Chip ID: 0x75 (Samsung NAND
32MiB 3,3V 8-bit)
[ 1.020000] Scanning device for bad blocks
[ 1.030000] Bad eraseblock 27 at 0x0006c000
[ 1.030000] Bad eraseblock 29 at 0x00074000
[ 1.200000] cmdlinepart partition parsing not available
[ 1.210000] Using builtin partition definition
[ 1.210000] Creating 4 MTD partitions on "NAND 32MiB 3,3V 8-bit":
[ 1.220000] 0x00000000-0x00004000 : "HTC first-stage bootstrap"
[ 1.230000] mtd: Giving out device 0 to HTC first-stage bootstrap
[ 1.230000] 0x00004000-0x00028000 : "HTC rescue bootloader"
[ 1.240000] mtd: Giving out device 1 to HTC rescue bootloader
[ 1.250000] 0x00028000-0x00168000 : "second-stage loader"
[ 1.250000] mtd: Giving out device 2 to second-stage loader
[ 1.260000] 0x00168000-0x02000000 : "root fs"
[ 1.260000] mtd: Giving out device 3 to root fs
[ 1.530000] pxa2xx_udc: version 4-May-2005
[ 1.530000] input: gpio-keys as /class/input/input0
[ 1.540000] input: h2200 buttons as /class/input/input1
[ 1.550000] input: ts-adc as /class/input/input2
[ 1.560000] sa1100-rtc sa1100-rtc: rtc core: registered sa1100-rtc as rtc0
[ 1.570000] Driver for 1-wire Dallas network protocol.
[ 1.570000] DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko
[ 1.600000] 1-Wire driver for the DS2760 battery monitor chip - (c)
2004-2005, Szabolcs Gyurko
[ 1.610000] APM Battery Driver
[ 1.620000] dmabounce: registered device samcop sdi on platform bus
[ 1.620000] samcop sdi: probe: irq=128 irq_cd=31 dma=0.
[ 1.630000] samcop sdi: initialisation done.
[ 1.640000] Registered led device: h2200:power-amber
[ 1.650000] Registered led device: h2200:notify-green
[ 1.660000] Registered led device: h2200:bluetooth-blu
[ 1.660000] TCP cubic registered
[ 1.670000] NET: Registered protocol family 1
[ 1.670000] NET: Registered protocol family 17
[ 1.670000] XScale DSP coprocessor detected.
[ 1.680000] sa1100-rtc sa1100-rtc: setting the system clock to 1970-01-01
00:00:12 (12)
[ 1.690000] Waiting 5sec before mounting root device...
[ 2.200000] pccard: PCMCIA card inserted into slot 0
[ 2.200000] pcmcia: registering new device pcmcia0.0
[ 2.560000] hda: KODAK ATA_FLASH, CFA DISK drive
[ 2.920000] ide0 at 0xc4960000-0xc4960007,0xc496000e on irq 30
[ 2.920000] hda: max request size: 128KiB
[ 2.930000] hda: 125952 sectors (64 MB) w/1KiB Cache, CHS=984/4/32
[ 2.930000] hda: hda1
[ 2.940000] ide-cs: hda: Vpp = 0.0
[ 6.700000] EXT2-fs warning: mounting unchecked fs, running e2fsck is
recommended
[ 6.710000] VFS: Mounted root (ext2 filesystem).
[ 6.720000] Freeing init memory: 84K
INIT: version 2.86 booting
.udev/ already exists on the static /dev!
Starting the hotplug events dispatcher udevd
udevd[319]: add_to_rules: unknown key 'DEVICE'
Synthesizing the initial hotplug events
Waiting for /dev to be fully populated
Remounting root file system...
[ 22.470000] Bluetooth: Core ver 2.11
[ 22.510000] NET: Registered protocol family 31
[ 22.510000] Bluetooth: HCI device and connection manager initialized
[ 22.520000] Bluetooth: HCI socket layer initialized
[ 22.620000] Bluetooth: L2CAP ver 2.8
[ 22.620000] Bluetooth: L2CAP socket layer initialized
[ 22.750000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 23.100000] NET: Registered protocol family 23
[ 23.190000] IrCOMM protocol (Dag Brattli)
[ 23.530000] Bluetooth: RFCOMM socket layer initialized
[ 23.540000] Bluetooth: RFCOMM TTY layer initialized
[ 23.540000] Bluetooth: RFCOMM ver 1.8
[ 24.500000] I2C: i2c-0: PXA I2C adapter
[ 24.500000] SACR0 = 0x7700, SADIV = 0x1a
[ 24.520000] PXA2xx i2Sound: h2200 Audio activated
[ 24.830000] ether gadget: using random self ethernet address
[ 24.830000] ether gadget: using random host ethernet address
[ 24.840000] usb0: Ethernet Gadget, version: May Day 2005
[ 24.850000] usb0: using pxa2xx_udc, OUT ep2out-bulk IN ep1in-bulk STATUS
ep6in-bulk
[ 24.850000] usb0: MAC 0e:12:46:aa:dd:fd
[ 24.860000] usb0: HOST MAC 36:b9:72:1d:21:26
[ 24.860000] usb0: RNDIS ready
root: mount: sys already mounted or /sys busy
root: mount: according to mtab, sysfs is already mounted on /sys
[ 25.690000] usb0: full speed config #1: 100 mA, Ethernet Gadget, using CDC
Ethernet Subset
[ 25.710000] usb0: full speed config #1: 100 mA, Ethernet Gadget, using CDC
Ethernet Subset
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces... SIOCGIFFLAGS: No such device
eth0 No such device
udhcpc (v1.2.1) started
udhcpc[1163]: udhcpc (v1.2.1) started
SIOCGIFINDEX failed!: No such device
udhcpc[1163]: SIOCGIFINDEX failed!: No such device
done.
Starting portmap daemon: portmap.
udevd-event[1064]: wait_for_sysfs: waiting for
'/sys/class/net/usb0/device/driver' failed
Fri May 30 17:26:00 UTC 2008
Starting to configure packages...
Nothing to be done
Finished to configure packages.
INIT: Entering runlevel: 5
ALSA: Restoring mixer settings...
Starting Dropbear SSH server: dropbear.
Starting advanced power management daemon: apmd.
apmd[1261]: apmd 3.2.1 interfacing with apm driver 1.13 and APM BIOS 1.2
Starting system message bus: dbus.
Starting Hardware abstraction layer hald
run-parts: /etc/dbus-1/event.d/20hal exited with return code 1: Success
Starting syslogd/klogd: done
* Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
[ ok ]
Starting Bluetooth subsystem: hcid hid2hci.
Running ntpdate to synchronize clockError : Temporary failure in name
resolution
.
Starting gpsd: success
Starting GPE display manager: gpe-dm
.-------.
| | .-.
| | |-----.-----.-----.| | .----..-----.-----.
| | | __ | ---'| '--.| .-'| | |
| | | | | |--- || --'| | | ' | | | |
'---'---'--'--'--. |-----''----''--' '-----'-'-'-'
-' |
'---'
The Angstrom Distribution h2200 ttyS0
Angstrom 2007.12 h2200 ttyS0
h2200 login:
--
Configure bugmail: http://bugs.openembedded.net/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.
More information about the Openembedded-issues
mailing list