[oe-users] Problem generating uImage for gumstix

[Steve Sakoman]

Philip,

No joy on the build:

Connecting to prdownloads.sourceforge.net|66.35.250.217|:80... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location:
http://downloads.sourceforge.net/u-boot/u-boot-1.2.0.tar.bz2?download&failedmirror=superb-east.dl.sourceforge.net[following]
20 redirections exceeded.
NOTE: Task failed: Fetch failed:
http://downloads.sourceforge.net/u-boot/u-boot-1.2.0.tar.bz2
NOTE: package uboot-utils-1.2.0-r6: task do_fetch: failed

According to SourceForce the source for u-boot seems to have moved:

The "U-Boot" Universal Bootloader project provides firmware for many CPU
architectures and boards with full source code under GPL. NOTE: current
source code is available from DENX git repository and FTP server; see
http://www.denx.de/en/Software/GIT

Steve

On 8/16/07, Steve Sakoman <sakoman at gmail.com> wrote:
>
> Philip,
>
> Thanks!  Just did the pull and update.
>
> Build is underway . . .
>
> Steve
>
> On 8/16/07, Philip Balister < philip at balister.org> wrote:
> >
> > OK, if you pull and update, you should be able to build a complete image
> >
> > for the gumstix. I fixed uboot-utils so it compiles mkimage, and added
> > uboot-utils as a dependency to the linux-gumstix bb file.
> >
> > Philip
> >
> > Steve Sakoman wrote:
> > > Koen,
> > >
> > > Thanks for your response.  I'm an Open Embedded beginner, so I'm not
> > quite
> > > sure what to do with your suggestion :-)
> > >
> > > Should the "DEPENDS" statement be added to the gumstix machine
> > definition?
> > >
> > > Steve
> > >
> > > On 8/15/07, Koen Kooi < koen at dominion.kabel.utwente.nl> wrote:
> > >> -----BEGIN PGP SIGNED MESSAGE-----
> > >> Hash: SHA1
> > >>
> > >> Philip Balister schreef:
> > >>> I can confirm this is a problem building Angstrom for a gumstix with
> > a
> > >>> clean tmp directory. I think the problem is that the kernel build
> > needs
> > >>> mkiamge from u-boot, but the gumstix machine does not build u-boot.
> > I
> > >>> tried building u-bbot for the gumstix, but u-boot contains no config
> > for
> > >>> the hardware. Then I tried building uboot-utils and that failed
> > trying
> > >>> to unpack :
> > >>>
> > >>> org.openembedded.dev/packages/uboot/files/fw_env.config': No such
> > file
> > >>> or directory
> > >>>
> > >>> Any thoughts?
> > >> Yes, DEPENDS = "u-boot-mkimage-openmoko-native" for a 'generic'
> > mkimage in
> > >> STAGING_BINDIR_NATIVE.
> > >>
> > >> regards,
> > >>
> > >> Koen
> > >> -----BEGIN PGP SIGNATURE-----
> > >> Version: GnuPG v1.4.5 (Darwin)
> > >>
> > >> iD8DBQFGw3UKMkyGM64RGpERAg0wAJ9W1ey+p1fJ9BCj1kngeOTvlSSYKQCgu4kQ
> > >> 7e3DquN5wj+Ac/xPMtRmPSE=
> > >> =npCT
> > >> -----END PGP SIGNATURE-----
> > >>
> > >> _______________________________________________
> > >> Openembedded-users mailing list
> > >> Openembedded-users at lists.openembedded.org
> > >> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-users
> >
> > >>
> > >
> > >
> > >
> > ------------------------------------------------------------------------
> > >
> > > _______________________________________________
> > > Openembedded-users mailing list
> > > Openembedded-users at lists.openembedded.org
> > > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-users
> >
> >
> > _______________________________________________
> > Openembedded-users mailing list
> > Openembedded-users at lists.openembedded.org
> > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-users
> >
> >
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openembedded.org/pipermail/openembedded-users/attachments/20070817/216f7428/attachment-0002.html>