[oe-users] Problem generating uImage for gumstix

[Philip Balister]

Ignore the previous email. I found the problem line.

It works for me because I have a copy of u-boot-1.2.0.tar.bz2 in my 
local bb_sources directory.

Philip

Steve Sakoman wrote:
> Philip,
> 
> No joy on the build:
> 
> Connecting to prdownloads.sourceforge.net|66.35.250.217|:80... connected.
> HTTP request sent, awaiting response... 301 Moved Permanently
> Location:
> http://downloads.sourceforge.net/u-boot/u-boot-1.2.0.tar.bz2?download&failedmirror=superb-east.dl.sourceforge.net[following]
> 20 redirections exceeded.
> NOTE: Task failed: Fetch failed:
> http://downloads.sourceforge.net/u-boot/u-boot-1.2.0.tar.bz2
> NOTE: package uboot-utils-1.2.0-r6: task do_fetch: failed
> 
> According to SourceForce the source for u-boot seems to have moved:
> 
> The "U-Boot" Universal Bootloader project provides firmware for many CPU
> architectures and boards with full source code under GPL. NOTE: current
> source code is available from DENX git repository and FTP server; see
> http://www.denx.de/en/Software/GIT
> 
> Steve
> 
> On 8/16/07, Steve Sakoman <sakoman at gmail.com> wrote:
>> Philip,
>>
>> Thanks!  Just did the pull and update.
>>
>> Build is underway . . .
>>
>> Steve
>>
>> On 8/16/07, Philip Balister < philip at balister.org> wrote:
>>> OK, if you pull and update, you should be able to build a complete image
>>>
>>> for the gumstix. I fixed uboot-utils so it compiles mkimage, and added
>>> uboot-utils as a dependency to the linux-gumstix bb file.
>>>
>>> Philip
>>>
>>> Steve Sakoman wrote:
>>>> Koen,
>>>>
>>>> Thanks for your response.  I'm an Open Embedded beginner, so I'm not
>>> quite
>>>> sure what to do with your suggestion :-)
>>>>
>>>> Should the "DEPENDS" statement be added to the gumstix machine
>>> definition?
>>>> Steve
>>>>
>>>> On 8/15/07, Koen Kooi < koen at dominion.kabel.utwente.nl> wrote:
>>>>> -----BEGIN PGP SIGNED MESSAGE-----
>>>>> Hash: SHA1
>>>>>
>>>>> Philip Balister schreef:
>>>>>> I can confirm this is a problem building Angstrom for a gumstix with
>>> a
>>>>>> clean tmp directory. I think the problem is that the kernel build
>>> needs
>>>>>> mkiamge from u-boot, but the gumstix machine does not build u-boot.
>>> I
>>>>>> tried building u-bbot for the gumstix, but u-boot contains no config
>>> for
>>>>>> the hardware. Then I tried building uboot-utils and that failed
>>> trying
>>>>>> to unpack :
>>>>>>
>>>>>> org.openembedded.dev/packages/uboot/files/fw_env.config': No such
>>> file
>>>>>> or directory
>>>>>>
>>>>>> Any thoughts?
>>>>> Yes, DEPENDS = "u-boot-mkimage-openmoko-native" for a 'generic'
>>> mkimage in
>>>>> STAGING_BINDIR_NATIVE.
>>>>>
>>>>> regards,
>>>>>
>>>>> Koen
>>>>> -----BEGIN PGP SIGNATURE-----
>>>>> Version: GnuPG v1.4.5 (Darwin)
>>>>>
>>>>> iD8DBQFGw3UKMkyGM64RGpERAg0wAJ9W1ey+p1fJ9BCj1kngeOTvlSSYKQCgu4kQ
>>>>> 7e3DquN5wj+Ac/xPMtRmPSE=
>>>>> =npCT
>>>>> -----END PGP SIGNATURE-----
>>>>>
>>>>> _______________________________________________
>>>>> Openembedded-users mailing list
>>>>> Openembedded-users at lists.openembedded.org
>>>>> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-users
>>>>
>>>>
>>> ------------------------------------------------------------------------
>>>> _______________________________________________
>>>> Openembedded-users mailing list
>>>> Openembedded-users at lists.openembedded.org
>>>> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-users
>>>
>>> _______________________________________________
>>> Openembedded-users mailing list
>>> Openembedded-users at lists.openembedded.org
>>> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-users
>>>
>>>
>>>
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> Openembedded-users mailing list
> Openembedded-users at lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-users
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/x-pkcs7-signature
Size: 3303 bytes
Desc: S/MIME Cryptographic Signature
URL: <http://lists.openembedded.org/pipermail/openembedded-users/attachments/20070817/2bc510c3/attachment-0002.bin>