[oe-users] Problem generating uImage for gumstix

[Steve Sakoman]

Hmmm . . . another newbie question!

Where does the rootfs image get placed at the end of the build?  Can't seem
to find it.

I'm assuming that the following line in the machine conf file is what builds
it:

EXTRA_IMAGECMD_jffs2 = "--little-endian --eraseblock=0x20000 --squash"

Thanks!

Steve

On 8/17/07, Philip Balister <philip at balister.org> wrote:
>
> Try again. Thanks for your patience.
>
> Philip
>
> Steve Sakoman wrote:
> > Philip,
> >
> > No joy on the build:
> >
> > Connecting to prdownloads.sourceforge.net|66.35.250.217|:80...
> connected.
> > HTTP request sent, awaiting response... 301 Moved Permanently
> > Location:
> >
> http://downloads.sourceforge.net/u-boot/u-boot-1.2.0.tar.bz2?download&failedmirror=superb-east.dl.sourceforge.net[following]
> > 20 redirections exceeded.
> > NOTE: Task failed: Fetch failed:
> > http://downloads.sourceforge.net/u-boot/u-boot-1.2.0.tar.bz2
> > NOTE: package uboot-utils-1.2.0-r6: task do_fetch: failed
> >
> > According to SourceForce the source for u-boot seems to have moved:
> >
> > The "U-Boot" Universal Bootloader project provides firmware for many CPU
> > architectures and boards with full source code under GPL. NOTE: current
> > source code is available from DENX git repository and FTP server; see
> > http://www.denx.de/en/Software/GIT
> >
> > Steve
> >
> > On 8/16/07, Steve Sakoman <sakoman at gmail.com> wrote:
> >> Philip,
> >>
> >> Thanks!  Just did the pull and update.
> >>
> >> Build is underway . . .
> >>
> >> Steve
> >>
> >> On 8/16/07, Philip Balister < philip at balister.org> wrote:
> >>> OK, if you pull and update, you should be able to build a complete
> image
> >>>
> >>> for the gumstix. I fixed uboot-utils so it compiles mkimage, and added
> >>> uboot-utils as a dependency to the linux-gumstix bb file.
> >>>
> >>> Philip
> >>>
> >>> Steve Sakoman wrote:
> >>>> Koen,
> >>>>
> >>>> Thanks for your response.  I'm an Open Embedded beginner, so I'm not
> >>> quite
> >>>> sure what to do with your suggestion :-)
> >>>>
> >>>> Should the "DEPENDS" statement be added to the gumstix machine
> >>> definition?
> >>>> Steve
> >>>>
> >>>> On 8/15/07, Koen Kooi < koen at dominion.kabel.utwente.nl> wrote:
> >>>>> -----BEGIN PGP SIGNED MESSAGE-----
> >>>>> Hash: SHA1
> >>>>>
> >>>>> Philip Balister schreef:
> >>>>>> I can confirm this is a problem building Angstrom for a gumstix
> with
> >>> a
> >>>>>> clean tmp directory. I think the problem is that the kernel build
> >>> needs
> >>>>>> mkiamge from u-boot, but the gumstix machine does not build u-boot.
> >>> I
> >>>>>> tried building u-bbot for the gumstix, but u-boot contains no
> config
> >>> for
> >>>>>> the hardware. Then I tried building uboot-utils and that failed
> >>> trying
> >>>>>> to unpack :
> >>>>>>
> >>>>>> org.openembedded.dev/packages/uboot/files/fw_env.config': No such
> >>> file
> >>>>>> or directory
> >>>>>>
> >>>>>> Any thoughts?
> >>>>> Yes, DEPENDS = "u-boot-mkimage-openmoko-native" for a 'generic'
> >>> mkimage in
> >>>>> STAGING_BINDIR_NATIVE.
> >>>>>
> >>>>> regards,
> >>>>>
> >>>>> Koen
> >>>>> -----BEGIN PGP SIGNATURE-----
> >>>>> Version: GnuPG v1.4.5 (Darwin)
> >>>>>
> >>>>> iD8DBQFGw3UKMkyGM64RGpERAg0wAJ9W1ey+p1fJ9BCj1kngeOTvlSSYKQCgu4kQ
> >>>>> 7e3DquN5wj+Ac/xPMtRmPSE=
> >>>>> =npCT
> >>>>> -----END PGP SIGNATURE-----
> >>>>>
> >>>>> _______________________________________________
> >>>>> Openembedded-users mailing list
> >>>>> Openembedded-users at lists.openembedded.org
> >>>>>
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-users
> >>>>
> >>>>
> >>>
> ------------------------------------------------------------------------
> >>>> _______________________________________________
> >>>> Openembedded-users mailing list
> >>>> Openembedded-users at lists.openembedded.org
> >>>>
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-users
> >>>
> >>> _______________________________________________
> >>> Openembedded-users mailing list
> >>> Openembedded-users at lists.openembedded.org
> >>> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-users
> >>>
> >>>
> >>>
> >
> >
> > ------------------------------------------------------------------------
> >
> > _______________________________________________
> > Openembedded-users mailing list
> > Openembedded-users at lists.openembedded.org
> > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-users
>
> _______________________________________________
> Openembedded-users mailing list
> Openembedded-users at lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-users
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openembedded.org/pipermail/openembedded-users/attachments/20070817/bd841019/attachment-0002.html>