Openembedded installation(build) problem

[Devendra Singh Rawat]

Hello all,

I am trying to build the complete Openembedded development platform along 
with the Angstrom Linux and the root filesystem for my Atmel AT91SAM9263EK
board on Fedora 8 using the instructions given in linux4sam.org and 
Openembedde
website. But every time after giving the bitbake <recipe> command I am 
getting the following error

binutils-2.17.50.0.5/bfd/doc/bfd.info" | sed 's|[^/]*$||'`; \
|       fi; \
|       rm -rf $backupdir; exit $rc
| WARNING: `makeinfo' is missing on your system.  You should only need it if
|          you modified a `.texi' or `.texinfo' file, or any other file
|          indirectly affecting the aspect of the manual.  The spurious
|          call might also be the consequence of using a buggy `make' (AIX,
|          DU, IRIX).  You might want to install the `Texinfo' package or
|          the `GNU make' package.  Grab either from any GNU archive site.
| make[3]: *** 
[/stuff/tmp/work/armv5te-angstrom-linux-gnueabi/binutils-cross-2.17.50.0.5-r1/binutils-2.17.50.0.5/bfd/doc/bfd.info] 
Error 1
| make[3]: Leaving directory 
`/stuff/tmp/work/armv5te-angstrom-linux-gnueabi/binutils-cross-2.17.50.0.5-r1/binutils-2.17.50.0.5/build.i686-linux.arm-angstrom-linux-gnueabi/bfd/doc'
| Making info in po
| make[3]: Entering directory 
`/stuff/tmp/work/armv5te-angstrom-linux-gnueabi/binutils-cross-2.17.50.0.5-r1/binutils-2.17.50.0.5/build.i686-linux.arm-angstrom-linux-gnueabi/bfd/po'
| ( if test 
'x/stuff/tmp/work/armv5te-angstrom-linux-gnueabi/binutils-cross-2.17.50.0.5-r1/binutils-2.17.50.0.5/bfd/po' 
!= 'x.'; then \
| 
posrcprefix='/stuff/tmp/work/armv5te-angstrom-linux-gnueabi/binutils-cross-2.17.50.0.5-r1/binutils-2.17.50.0.5/bfd/'; 
\
|         else \
|           posrcprefix="../"; \
|         fi; \
|         rm -f SRC-POTFILES-t SRC-POTFILES \
|           && (sed -e '/^#/d' \
|                   -e '/^[     ]*$/d' \
|                   -e "s at .*@   $posrcprefix& \\\\@" < 
/stuff/tmp/work/armv5te-angstrom-linux-gnueabi/binutils-cross-2.17.50.0.5-r1/binutils-2.17.50.0.5/bfd/po/SRC-POTFILES.in 
\
|               | sed -e '$s/\\$//') > SRC-POTFILES-t \
|           && chmod a-w SRC-POTFILES-t \
|           && mv SRC-POTFILES-t SRC-POTFILES )
| ( rm -f BLD-POTFILES-t BLD-POTFILES \
|           && (sed -e '/^#/d' \
|                   -e '/^[     ]*$/d' \
|                   -e "s at .*@   ../& \\\\@" < 
/stuff/tmp/work/armv5te-angstrom-linux-gnueabi/binutils-cross-2.17.50.0.5-r1/binutils-2.17.50.0.5/bfd/po/BLD-POTFILES.in 
\
|               | sed -e '$s/\\$//') > BLD-POTFILES-t \
|           && chmod a-w BLD-POTFILES-t \
|           && mv BLD-POTFILES-t BLD-POTFILES )
| cd .. \
|         && CONFIG_FILES=po/Makefile.in:po/Make-in \
|            CONFIG_HEADERS= /bin/sh ./config.status
| config.status: creating po/Makefile.in
| config.status: executing depfiles commands
| config.status: executing default-1 commands
| config.status: executing default commands
| make[3]: Leaving directory 
`/stuff/tmp/work/armv5te-angstrom-linux-gnueabi/binutils-cross-2.17.50.0.5-r1/binutils-2.17.50.0.5/build.i686-linux.arm-angstrom-linux-gnueabi/bfd/po'
| make[3]: Entering directory 
`/stuff/tmp/work/armv5te-angstrom-linux-gnueabi/binutils-cross-2.17.50.0.5-r1/binutils-2.17.50.0.5/build.i686-linux.arm-angstrom-linux-gnueabi/bfd/po'
| make[3]: Nothing to be done for `info'.
| make[3]: Leaving directory 
`/stuff/tmp/work/armv5te-angstrom-linux-gnueabi/binutils-cross-2.17.50.0.5-r1/binutils-2.17.50.0.5/build.i686-linux.arm-angstrom-linux-gnueabi/bfd/po'
| make[3]: Entering directory 
`/stuff/tmp/work/armv5te-angstrom-linux-gnueabi/binutils-cross-2.17.50.0.5-r1/binutils-2.17.50.0.5/build.i686-linux.arm-angstrom-linux-gnueabi/bfd'
| make[3]: Nothing to be done for `info-am'.
| make[3]: Leaving directory 
`/stuff/tmp/work/armv5te-angstrom-linux-gnueabi/binutils-cross-2.17.50.0.5-r1/binutils-2.17.50.0.5/build.i686-linux.arm-angstrom-linux-gnueabi/bfd'
| make[2]: *** [info-recursive] Error 1
| make[2]: Leaving directory 
`/stuff/tmp/work/armv5te-angstrom-linux-gnueabi/binutils-cross-2.17.50.0.5-r1/binutils-2.17.50.0.5/build.i686-linux.arm-angstrom-linux-gnueabi/bfd'
| make[1]: *** [all-bfd] Error 2
| make[1]: Leaving directory 
`/stuff/tmp/work/armv5te-angstrom-linux-gnueabi/binutils-cross-2.17.50.0.5-r1/binutils-2.17.50.0.5/build.i686-linux.arm-angstrom-linux-gnueabi'
| make: *** [all] Error 2
| FATAL: oe_runmake failed
NOTE: Task failed: 
/stuff/tmp/work/armv5te-angstrom-linux-gnueabi/binutils-cross-2.17.50.0.5-r1/temp/log.do_compile.16336
NOTE: package binutils-cross-2.17.50.0.5-r1: task do_compile: failed
ERROR: TaskFailed event exception, aborting
NOTE: package binutils-cross-2.17.50.0.5: failed
ERROR: Build of 
/stuff/org.openembedded.dev/packages/binutils/binutils-cross_2.17.50.0.5.bb 
do_compile failed
ERROR: Task 265 
(/stuff/org.openembedded.dev/packages/binutils/binutils-cross_2.17.50.0.5.bb, 
do_compile) failed
NOTE: Tasks Summary: Attempted 119 tasks of which 0 didn't need to be rerun 
and 1 failed.
ERROR: 
'/stuff/org.openembedded.dev/packages/binutils/binutils-cross_2.17.50.0.5.bb' 
failed

********************************************************************************************
I have even installed makeinfo on my system still the errors are coming. Is 
it because of my OS(Fedora 8), should I use some older version of Fedora, or 
is there some workaround for
this problem Plz help

Thanks in advance,

Devendra