Running "issue" on at91sam9263ek

[Christian Gagneraud]

Guillaume Spalla wrote:
> Hi all,
> 
> I am building an image (console-image.bb <http://console-image.bb>) for 
> an at91sam9263ek board. I am using the angstrom-2008.1 distribution. The 
> kernel is 2.6.28, the gcc version 4.2.4, and my partition is in JFFS2. 
> When I boot the board, everything looks ok until this line:
> 
> [42949375.840000] Warning: unable to open an initial console.

It usually means that ur kernel can't find a /dev/console. Be sure you 
have one in ur rootfs image.

Chris

> 
> Then the system does not boot anymore. There is no kernel panic 
> messages. If I reboot the board, then the system is working fine.
> But if I use the same root file system in a read only format (cramfs / 
> squashfs), then the system freezes at the same point and it never boots 
> (even if I reboot several times).
> 
> Did anyone already encountered this problem?
> 
> Thanks in advance,
> 
> Best regards,
> 
> Guillaume Spalla
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> Openembedded-users mailing list
> Openembedded-users at lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-users