Openembedded.org - User contributions [en]

OEDEM 2017

2017-08-27T09:14:10Z

Anders: /* Attendees */

== Location and Time ==

Sunday, 22 October 2017<br>
(before ELC-E [Oct 23-25])

Yes, we know it is Sunday. Best we could do this year.

Hilton Prague - Prague, Czech Republic
Start at 0900

== Attendees ==

* Jeff Osier-Mixon "Jefro"
* Behan Webster (behanw)
* Philip Balister (Crofton)
* Martin Jansa (JaMa)
* Scott Murray (smurray)
* Peter Kjellerstedt (Saur)
* Armin Kuster (Armpit)
* Marco Cavallini (mckoan)
* Paul Barker (paulbarker)
* Myunghun Chun
* Changhyeok Bae
* Adrian Ratiu (aratiu)
* Josef Holzmayr (LetoThe2nd)
* Jan Leupold
* Anders Darander

NOTE: we will make every effort to provide a web/phone link for remote attendees

== Agenda Items ==

# add agenda items here

== Minutes ==

=== OEDEM: ===

Berlin, 2016

2016-09-07T07:59:13Z

Anders: /* Attendance */

= '''e.V. General Assembly (GA) Meeting for 2016''' =

==Location ==

Berlin, Germany

October 14, 2015 at 0900 - 1000

== Agenda ==

* Treasurer report
* Update on eV status

== Forms ==

* Proxy form [[File:Proxy_instructions-oe.pdf]]

== Attendance ==

* Andrei Gherzan (agherzan)
* Jeff Osier-Mixon (jefro)
* Marco Cavallini (mckoan)
* Anders Darander

OEDEM 2016

2016-07-30T14:08:00Z

Anders: /* Attendees */

== Location and Time ==

Friday, October 14 2016<br>
(after ELC-E [Oct 11-13])

Specific location in Berlin will be announced later

== Attendees ==

Khem Raj "khem"

Armin Kuster "Armpit"

Marco Cavallini "mckoan"

Pierre-Jean Texier "pjtexier"

Koen Kooi "koen"

Anders Darander

== Agenda Items ==

TBD

== Minutes ==

OEDEM 2015

2015-07-28T05:14:41Z

Anders: /* Attendees */

The 2015 OpenEmbedded Developer's European Meeting will take place Friday, Oct 9, 2015 in Dublin, Ireland, at a location to be announced. Part of this meeting will also constitute the annual OE General Assembly, and some corporation/eV matters will be discussed.

== Location and Time ==

TBD

== Agenda ==

* Standards for BSP behavior.

== Attendees ==

If you plan to attend, please list your name below.

* Jeff Osier-Mixon (jefro)
* Philip Balister (Crofton)
* Trevor Woerner (tlwoerner)
* Anders Darander (andersd)

Training

2015-07-07T12:42:29Z

Anders:

The companies and individuals listed here provide OpenEmbedded and Yocto Project related training. Let's try and keep the entries in alphabetical order.

=== Company example 1 ===

We provide awesome training and can correctly describe the difference between '''OpenEmbedded''' and the '''Yocto Project'''.

------------------------

=== ChargeStorm AB - Sweden (all Nordic countries) ===

We provide open sessions, as well as on-site trainings focused on OpenEmbedded / Yocto Project, Embedded Linux, Device drivers. The trainings are normally handled through Nohau Solutions AB. On-site sessions can be customised according to your needs. ChargeStorm has extensive experience in embedded Linux, both in our own products, as well as in contracting work. OpenEmbedded has been the basis for our work for quite a few years. We've been doing BSP, systems design, and build systems.

* [http://www.nohau.de/training/training-catagories/embedded-development-and-debugging/yocto OpenEmbedded / Yocto Project] 3-day training. This training assumes that you're familiar with Linux and Embedded Linux. We'll start by setting up and building a small image, and soon we'll be extending recipes, write our own recipes, create an SDK, and learn a lot about everything else.

If needed, we also have [http://www.nohau.de/training/training-catagories/embedded-development-and-debugging/develop-linux-based-embedded-systems Basic Embedded Linux] and [http://www.nohau.de/training/training-catagories/embedded-development-and-debugging/embedded-linux-device-driver-training Introduction to Linux Device Drivers].
All trainers for these trainings comes from ChargeStorm AB.

------------------------

=== KOAN sas - Italy ===

We provide training courses '''at the customer's facilities''' worldwide or at our office in '''Bergamo, Italy''' focused on Linux embedded, OpenEmbedded, Yocto Project, Device drivers and Qt library.
We have an advanced level course focusing on '''OpenEmbedded''' build environment and '''Yocto Project'''.
This course provides the necessary information to configure and use Openembedded, git and bitbake to build an embedded linux distribution from scratch. It will also cover the full management of recipes overlay using custom layers.

The objective of KOAN courses is to supply to the participants a complete technical preparation that puts them in the position to managing the job or the whole project in autonomy.

All courses are in '''Italian''' language. Courses in '''English''' are available on request.
All courses will be organized using desktop systems based on Ubuntu linux as Host system.

* '''Website''': http://www.koansoftware.com

Training courses in italian and english
* '''ITA''': http://www.koansoftware.com/it/content/formazione
* '''ENG''': http://www.koansoftware.com/en/content/training

------------------------

=== Reliable Embedded Systems - Austria/Greece ===

==== Who is the trainer? ====

[http://www.reliableembeddedsystems.com/misc/about.html Robert's] expertise ranges from the smallest real-time systems (FreeRTOS) to set-ups with multiple processors/cores and embedded GNU/Linux (user-, kernel-space, device drivers, hardware interfacing, debugging, multi-core, Yocto Project) with a focus on free and open source software. Robert is a globe-trotter. He is CEO & Embedded Software Specialist at Reliable Embedded Systems which is based in St. Barbara, Austria, and when not travelling, lives with his family in Athens, Greece.

==== Our trainings ====

===== The Yocto Project - An Overview (3 days) =====

* [http://yocto.training http://yocto.training]
* [http://www.reliableembeddedsystems.com/pdfs/Yocto-flyer-en.pdf pdf in English]
* [http://www.reliableembeddedsystems.com/pdfs/Yocto-flyer-de.pdf pdf auf Deutsch]

Please note that this is not an introductory course to Embedded GNU/Linux like the one we offer [http://www.reliableembeddedsystems.com/embedded-linux-systems-architecture.html here]. You should already know how Embedded GNU/Linux works and maybe you even configured/built the Linux kernel for some of your projects.

===== Overview of our (other) trainings =====

[http://embedded-linux.training http://embedded-linux.training]

==== Training delivery options ====

All the training material is English, but the presentation of it can be in English or in German, as you wish. Trainings can be delivered world-wide. We delivered on-site trainings in [http://www.reliableembeddedsystems.com/misc/on-site.html those places].

* on-site - instructor driven *)
* on-line - instructor driven **)
* on-site/on-line combination - instructor driven *)**)

During the training we’ll provide laptops*), boards*)**), workbooks(in English)*)**), remote access to servers and boards **), screen-sharing **), audio-bridge **). For possible training delivery options check [http://www.reliableembeddedsystems.com/delivery-options.html here] and/or ask [http://www.reliableembeddedsystems.com/contact-us.html here].

==== How to reach us? ====

* [http://www.ReliableEmbeddedSystems.com http://www.ReliableEmbeddedSystems.com]

* [http://embedded-linux.training http://embedded-linux.training]

* [http://yocto.training http://yocto.training]

* [http://www.reliableembeddedsystems.com/contact-us.html Contact us].
-------------------------------

=== Sidebranch - The Netherlands ===

We provide training-on-the-job to bring your team up to speed with technologies like OpenEmbedded Core and Yocto Project to realize your next Linux product. We are experienced with board-bring up, boot loader modifications, firmware upgrade and provisioning, device driver development, application design, FPGA design and board design services. Typically we engage early during the architectural phase to help make system-wide decisions on hardware and software, and help you get up to speed with all involved technologies. Your team can make a quick-start on realizing the core application, while the team members learn how an Embedded Linux project is realized with OpenEmbedded and Yocto Project. Our OpenEmbedded training is on-the-job meaning we take the hardware used in your project and focus on things that need to be done for the project realization.

We work with international customers, either on-site or remotely. We speak Dutch and English and read German. The founder of Sidebranch, Leon Woestenberg, has over 20 years experience with Linux and over 10 years experience with OpenEmbedded.

* '''Website''': http://www.sidebranch.com/
* '''Contact''': Leon Woestenberg <leon@sidebranch.com>

[[Category:Admin]]

Training

2015-07-07T12:39:35Z

Anders:

The companies and individuals listed here provide OpenEmbedded and Yocto Project related training. Let's try and keep the entries in alphabetical order.

=== Company example 1 ===

We provide awesome training and can correctly describe the difference between '''OpenEmbedded''' and the '''Yocto Project'''.

=== ChargeStorm AB - Sweden (all Nordic countries) ===

We provide open sessions, as well as on-site trainings focused on OpenEmbedded / Yocto Project, Embedded Linux, Device drivers. The trainings are normally handled through Nohau Solutions AB. On-site sessions can be customised according to your needs. ChargeStorm has extensive experience in embedded Linux, both in our own products, as well as in contracting work. OpenEmbedded has been the basis for our work for quite a few years.

* [http://www.nohau.de/training/training-catagories/embedded-development-and-debugging/yocto OpenEmbedded / Yocto Project] 3-day training. This training assumes that you're familiar with Linux and Embedded Linux. We'll start by setting up and building a small image, and soon we'll be extending recipes, write our own recipes, create an SDK, and learn a lot about everything else.

* [http://www.nohau.de/training/training-catagories/embedded-development-and-debugging/develop-linux-based-embedded-systems Basic Embedded Linux] This is the introduction to Embedded Linux.
* [http://www.nohau.de/training/training-catagories/embedded-development-and-debugging/embedded-linux-device-driver-training Device Drivers] Introduction to Linux Device Drivers.
All trainers for these trainings comes from ChargeStorm AB.

=== KOAN sas - Italy ===

We provide training courses '''at the customer's facilities''' worldwide or at our office in '''Bergamo, Italy''' focused on Linux embedded, OpenEmbedded, Yocto Project, Device drivers and Qt library.
We have an advanced level course focusing on '''OpenEmbedded''' build environment and '''Yocto Project'''.
This course provides the necessary information to configure and use Openembedded, git and bitbake to build an embedded linux distribution from scratch. It will also cover the full management of recipes overlay using custom layers.

The objective of KOAN courses is to supply to the participants a complete technical preparation that puts them in the position to managing the job or the whole project in autonomy.

All courses are in '''Italian''' language. Courses in '''English''' are available on request.
All courses will be organized using desktop systems based on Ubuntu linux as Host system.

* '''Website''': http://www.koansoftware.com

Training courses in italian and english
* '''ITA''': http://www.koansoftware.com/it/content/formazione
* '''ENG''': http://www.koansoftware.com/en/content/training

------------------------

=== Reliable Embedded Systems - Austria/Greece ===

==== Who is the trainer? ====

[http://www.reliableembeddedsystems.com/misc/about.html Robert's] expertise ranges from the smallest real-time systems (FreeRTOS) to set-ups with multiple processors/cores and embedded GNU/Linux (user-, kernel-space, device drivers, hardware interfacing, debugging, multi-core, Yocto Project) with a focus on free and open source software. Robert is a globe-trotter. He is CEO & Embedded Software Specialist at Reliable Embedded Systems which is based in St. Barbara, Austria, and when not travelling, lives with his family in Athens, Greece.

==== Our trainings ====

===== The Yocto Project - An Overview (3 days) =====

* [http://yocto.training http://yocto.training]
* [http://www.reliableembeddedsystems.com/pdfs/Yocto-flyer-en.pdf pdf in English]
* [http://www.reliableembeddedsystems.com/pdfs/Yocto-flyer-de.pdf pdf auf Deutsch]

Please note that this is not an introductory course to Embedded GNU/Linux like the one we offer [http://www.reliableembeddedsystems.com/embedded-linux-systems-architecture.html here]. You should already know how Embedded GNU/Linux works and maybe you even configured/built the Linux kernel for some of your projects.

===== Overview of our (other) trainings =====

[http://embedded-linux.training http://embedded-linux.training]

==== Training delivery options ====

All the training material is English, but the presentation of it can be in English or in German, as you wish. Trainings can be delivered world-wide. We delivered on-site trainings in [http://www.reliableembeddedsystems.com/misc/on-site.html those places].

* on-site - instructor driven *)
* on-line - instructor driven **)
* on-site/on-line combination - instructor driven *)**)

During the training we’ll provide laptops*), boards*)**), workbooks(in English)*)**), remote access to servers and boards **), screen-sharing **), audio-bridge **). For possible training delivery options check [http://www.reliableembeddedsystems.com/delivery-options.html here] and/or ask [http://www.reliableembeddedsystems.com/contact-us.html here].

==== How to reach us? ====

* [http://www.ReliableEmbeddedSystems.com http://www.ReliableEmbeddedSystems.com]

* [http://embedded-linux.training http://embedded-linux.training]

* [http://yocto.training http://yocto.training]

* [http://www.reliableembeddedsystems.com/contact-us.html Contact us].
-------------------------------

=== Sidebranch - The Netherlands ===

We provide training-on-the-job to bring your team up to speed with technologies like OpenEmbedded Core and Yocto Project to realize your next Linux product. We are experienced with board-bring up, boot loader modifications, firmware upgrade and provisioning, device driver development, application design, FPGA design and board design services. Typically we engage early during the architectural phase to help make system-wide decisions on hardware and software, and help you get up to speed with all involved technologies. Your team can make a quick-start on realizing the core application, while the team members learn how an Embedded Linux project is realized with OpenEmbedded and Yocto Project. Our OpenEmbedded training is on-the-job meaning we take the hardware used in your project and focus on things that need to be done for the project realization.

We work with international customers, either on-site or remotely. We speak Dutch and English and read German. The founder of Sidebranch, Leon Woestenberg, has over 20 years experience with Linux and over 10 years experience with OpenEmbedded.

* '''Website''': http://www.sidebranch.com/
* '''Contact''': Leon Woestenberg <leon@sidebranch.com>

[[Category:Admin]]

Dusseldorf, 2014

2014-09-08T06:24:50Z

Anders: /* Attendance */

==Location ==

Congress Centre Düsseldorf, Düsseldorf, Germany

October 14, 2014 at 1300 - 1500 in room 10.

== Agenda ==

* Financial report
* Election of new members

== Forms ==

* Proxy form [[File:Proxy_instructions-oe.pdf]]

== Attendance ==
* Martin 'JaMa' Jansa
* Jeff 'Jefro' Osier-Mixon
* Denys 'denix' Dmytriyenko
* Dave "davest" Stewart (likely)
* Philip "Crofton" Balister
* Ross "rburton" Burton
* 'Khem' Raj
* Mark 'fray' Hatle
* Henning "woglinde" Heinold (I think, I need the reactivation)
* Anders Darander

== Meeting notes ==

== Action Items ==

Edinburgh, 2013

2013-10-14T13:31:49Z

Anders: /* Attendence Record */

==Location ==

Edinburgh International Conference Centre, Edinburgh, UK

October 25, 2013 at 1830 - 1930

== Agenda ==

* Financial report

== Forms ==

* Proxy form [[File:Proxy_instructions-oe.pdf]]

== Attendence Record ==

(Proxies are in brackets)

* Marco Cavallini 'mckoan' (proxying for Eric Bénard 'ericben')
* Paul Eggleton 'bluelightning' (proxying for Andrea Adami 'ant')
* Philip Balister 'Crofton'
* Richard Purdie 'RP'
* Martin Jansa 'JaMa'
* Denys Dmytriyenko 'denix'
* Koen Kooi 'koen' ( Khem Raj 'khem')
* Anders Darander

Barcelona, 2012

2012-10-31T15:03:11Z

Anders: /* Participants */

==Location ==

Hotel Fira Palace · Barcelona, Spain
Nov 7, 2012 at 17:00.

== Agenda ==

* Financial report
* Board Elections, Dr. Michael Lauer, Florian Boor, and Philip Balister's terms are ending.

== Participants ==

The sign [P] means he/she is available as proxy.

* Marco Cavallini (mckoan) [P]
* Eric Bénard (ericben) [P]
* Mark Hatle (fray) [P]
* Sean Hudson (darknighte) [P]
* Stefan Schmidt (stefan_schmidt)
* Khem Raj (khem)[P]
* Anders Darander [P]

== Forms ==

* Proxy form [[File:Proxy_instructions-oe.pdf]]