[OE-core] target rpm build failure

[Giuseppe Condorelli]

Hi Khem,
2012/6/1 Khem Raj <raj.khem at gmail.com>

> On Fri, Jun 1, 2012 at 7:07 AM, Giuseppe Condorelli
> <giuseppe.condorelli at gmail.com> wrote:
> > Many thanks Khem,
> >
> > I've applied your patches to my local repository.
> > Unfortunately the uclibc setup I'm using doesn't provide support for
> mcheck,
> > so I'm falling in the same error.
>
> hmm strange. Are you using OE-Core provided uclibc or something else ?
> I could compile rpm successfully after I used the patch
>
> http://git.openembedded.org/openembedded-core-contrib/commit/?h=kraj/misc&id=44ecbebf17d18471becaccd37733e6b0e806c80d
>
> No I don't, I'm using an own uclibc included as new recipe in the meta
layer I've created for my scope.
I'll have to extend it supporting mcheck.


> > However I have in mind also to build the glibc version of the whole image
> > and so here I will haven't problem building rpm.
> >
> > But regarding glibc support I can see there is eglibc support and not
> glibc.
> > I'm not deep informed about differencies, in oe-classis I had glibc and
> in
> > oe-core it seems not supported.
> > Please can you make light to this point?
> > I need glibc also, how can I obtain it?
>
> well there are no differences as far as ABI is concerned. eglibc has
> additional bit to help cross building
> and testing rest it is glibc only. You should be fine using eglibc
> version provided by OE-Core and it should interoperate well
> with glibc based system
>
>
That's great.

Cheers,
Giuseppe

>
>
>
> > Best Regards,
> > Giuseppe
> >
> > 2012/6/1 Khem Raj <raj.khem at gmail.com>
> >>
> >> On Thu, May 31, 2012 at 7:47 AM, Giuseppe Condorelli
> >> <giuseppe.condorelli at gmail.com> wrote:
> >> > Have new suggestions?
> >>
> >> I found a bit of time and fixed rpm compilation on uclibc. Its only
> >> compiling though I don't know if it will run on target. Try it out.
> >> The patch is here
> >>
> >>
> >>
> http://git.openembedded.org/openembedded-core-contrib/commit/?h=kraj/misc&id=3b7ab8bbaca0c7ce122e897a11370dd215b0eddd
> >>
> >> This should get you going. Please test it out and I would prefer if you
> >> can
> >> also try it out on target and see if it really runs too.
> >>
> >> -Khem
> >>
> >> _______________________________________________
> >> Openembedded-core mailing list
> >> Openembedded-core at lists.openembedded.org
> >> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
> >
> >
> >
> > _______________________________________________
> > Openembedded-core mailing list
> > Openembedded-core at lists.openembedded.org
> > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
> >
>
> _______________________________________________
> Openembedded-core mailing list
> Openembedded-core at lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openembedded.org/pipermail/openembedded-core/attachments/20120601/668f508a/attachment-0002.html>