[OE-core] RPM package generation architecture

[Otavio Salvador]

On Sun, Jan 18, 2015 at 11:07 PM, Mark Hatle <mark.hatle at windriver.com> wrote:
> On 1/18/15 4:55 PM, Yevhen Kyriukha wrote:
>> I'm building RPM packages for ARM board.
>> I'm getting packages generated for 3 architectures: all, raspberrypi,
>> armv6hf_vfp.
>> I can't install any of these packages with rpm as it uses "uname" to
>> get current machine arch and "uname" outputs "armv6l" arch. Also "all"
>> should be "noarch" for rpm.
>> I want that packages have "proper" arch: "noarch" and "armv6l".
>> Could someone give suggestions on this, please?
>>
>
> You are using the wrong version of RPM.  You need to use the version (RPM5) that
> is configured by the system during the filesystem generation, along with the
> platform file (/etc/rpm/platform) to specify to the system what is allowed.
>
> RPM4 (which it sounds like you are using) does not have an easily adjustable
> table of package names.  To install Yocto Project packages, you will need to
> patch it to define the additional names.

Shouldn't RPM4 to be removed from OE-Core in this case?


-- 
Otavio Salvador                             O.S. Systems
http://www.ossystems.com.br        http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750