[oe] Looking for Familiar/iPAQ local.conf example

[Sam Green]

Hello,

I have followed http://www.openembedded.org/wiki/GettingStarted _very_
carefully, but I am unable to get past the "bitbake nano" step. Here is the
output:

kmu at debian:~/dev/oe/build$ bitbake nano
NOTE: Using cache in '/home/kmu/dev/oe/build/tmp/cache/h3800'
NOTE: Handling BitBake files: \ (4072/4072) [100 %]
NOTE: Parsing finished. 0 cached, 3899 parsed, 173 skipped, 0 masked.

NOTE: build 200612131210: started

OE Build Configuration:
BB_VERSION     = "1.6.3"
OE_REVISION    = "7dc5c6145f5a9f64aba3521e24e1a0b1ff7f0e0e"
TARGET_ARCH    = "arm"
TARGET_OS      = "linux"
MACHINE        = "h3800"
DISTRO         = "familiar"
DISTRO_VERSION = "0.8.4"
TARGET_FPU     = "soft"

NOTE: package quilt-native-0.45: started
NOTE: package quilt-native-0.45-r0: task do_populate_staging: started
NOTE: SITE files /home/kmu/dev/oe/org.openembedded.dev/site/endian-little
/home/kmu/dev/oe/org.openembedded.dev/site/ix86-common
ERROR: function do_stage failed
ERROR: log data follows (/home/kmu/dev/oe/build/tmp/work/quilt-
native-0.45-r0/temp/log.do_stage.4017)
| NOTE: make install
| make: *** No rule to make target `install'.  Stop.
| FATAL: oe_runmake failed
NOTE: Task failed: /home/kmu/dev/oe/build/tmp/work/quilt-native-0.45-r0
/temp/log.do_stage.4017
NOTE: package quilt-native-0.45-r0: task do_populate_staging: failed
ERROR: TaskFailed event exception, aborting
NOTE: package quilt-native-0.45: failed
ERROR: Build of nano failed

I think my problem is my local.conf. Can someone developing for
Familiar/iPAQ post theirs?

Thanks,
Sam