[oe] [Bug 1460] New: Socket LP CF WLAN card not working on OZ3.5.4.1 on C860

[bugzilla-daemon at tinman.treke.net]

http://bugs.openembedded.org/show_bug.cgi?id=1460

           Summary: Socket LP CF WLAN card not working on OZ3.5.4.1 on C860
           Product: Openembedded
           Version: OpenZaurus 3.5.4.x
          Platform: ARM
        OS/Version: Linux
            Status: NEW
          Severity: normal
          Priority: P2
         Component: Distributions
        AssignedTo: openembedded-devel at lists.openembedded.org
        ReportedBy: kelly.harding at gmail.com
         QAContact: tinderbox-oe at gmx.net


On my Zaurus C860, using the OZ3.5.4.1/OPIE install, my Socket LP CF WLAN card
won't work.

Get when doing dmesg:

pccard: card ejected from slot 0
pccard: PCMCIA card inserted into slot 0
pcmcia: registering new device pcmcia0.0
orinoco 0.15rc3 (David Gibson <hermes at gibson.dropbear.id.au>, Pavel Roskin
<proski at gnu.org>, et al)
spectrum_cs 0.15rc3 (Pavel Roskin <proski at gnu.org>, David Gibson
<hermes at gibson.dropbear.id.au>, et al)
eth0: Hardware identity 8000:0001:0000:0000
eth0: Station identity  0021:0002:0002:0001
eth0: Firmware determined as Symbol F3.91-71
eth0: Ad-hoc demo mode supported
eth0: IEEE standard IBSS ad-hoc mode supported
eth0: WEP supported, 104-bit key
eth0: MAC address 00:A0:F8:A1:73:73
eth0: Station name "Prism  I"
eth0: ready
eth0: index 0x01: Vcc 3.3, irq 40, io 0xc4820000-0xc4820047
hermes @ c4820000: Truncating LTV record from 8 to 6 bytes. (rid=0xfd43,
len=0x0005)
ADDRCONF(NETDEV_UP): eth0: link is not ready
pccard: card ejected from slot 0
pccard: PCMCIA card inserted into slot 0
pcmcia: registering new device pcmcia0.0
eth0: Hardware identity 8000:0001:0000:0000
eth0: Station identity  0021:0002:0002:0001
eth0: Firmware determined as Symbol F3.91-71
eth0: Ad-hoc demo mode supported
eth0: IEEE standard IBSS ad-hoc mode supported
eth0: WEP supported, 104-bit key
eth0: MAC address 00:A0:F8:A1:73:73
eth0: Station name "Prism  I"
eth0: ready
eth0: index 0x01: Vcc 3.3, irq 40, io 0xc4820000-0xc4820047
hermes @ c4820000: Truncating LTV record from 8 to 6 bytes. (rid=0xfd43,
len=0x0005)
ADDRCONF(NETDEV_UP): eth0: link is not ready
hermes @ c4820000: Truncating LTV record from 8 to 6 bytes. (rid=0xfd43,
len=0x0005)
ADDRCONF(NETDEV_UP): eth0: link is not ready

cardctl ident shows:

Socket 0:
 product info: "Socket", "CF+ LP WLAN Card Rev A", "1.00"
 manfid: 0x0104, 0x0001
 function: 6 (network)

Network settings have been double checked and verified, all settings are
correct, including WEP key. I know the card works perfectly, as under Cacko
1.23 the card works flawlessly. Under OZ3.5.4.1 nothing.


-- 
Configure bugmail: http://bugs.openembedded.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.