[oe] OE changelog 20070706-20070713
Koen Kooi
koen at dominion.kabel.utwente.nl
Fri Jul 13 11:54:55 UTC 2007
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Generated on 20075113
Laibsch at openembedded.org:
poboxserver: fix -dbg packaging. reorder some fields.
qpobox/poboxserver: some unfinished changes
daniel at openembedded.org:
classes/base.bbclass: Fallback to archive.apache.org for older versions
* Change URL of package db3_3.2.9 to working mirror. (Closes #2606)
florian at openembedded.org:
hiker: Add 0.9.1... we silently ignore demos installed to wron directories.
gnet: Add svn version instead of CVS one. Add necessary site file bits.
linux-gta01: Add defconfig for 2.6.21.5
machined: Hardware status and abstraction tool.
gpe-session-scripts-phone: Update session script to support gtk 2.10 and run machined.
linux-gta01: Add 2.6.21.5 from OpenMoko
ptim: Drop some obsolete patches.
task-gpephone: Add some tools to debug section.
fic-gta01.conf: Update included modules and enable padding of jffs2 images.
gpe-scap: Add fixed version 1.3
hrw at openembedded.org:
automake: added 1.10 - not tested too much, needed by parted 1.8.7, not default
glib-2.0: fix packaging in 2.12.12 - should end discussion on OE list
libxosd: fix packaging (from Poky)
koen at openembedded.org:
e-wm: fix startup script, fix u-a and install xdg stuff (per
http://wiki.enlightenment.org/index.php/E17_and_Efreet)
angstrom: add altboot versions of x11 and console images, untested, I'll leave that to
the altboot wanting crowd
angstrom-e-image: move to non-working, since it is, well, non-working. The level of
non-workingness is quite high, since e-wm is currently unbuildable due to ecore-native,
and even if e-wm would build, its update-alternatives are wrong. So before this image can
be moved back, all e packages have to get built, inspected, tested and if needed fixed.
wireshark: fix -dbg
disapproval of revision '66573a06c1ee62e38d70a6c82f8d99a41243cd5c'
lenehan at openembedded.org:
perl 5.8.8: A few host paths were being included in the perl for the target.
perl/perl-native 5.8.8: Fix up asm/page.h include issue. Perl was including
marek.vasut at gmail.com:
linux-hackndev-2.6 svn: Update repo URL.
qemu-native: amd64-enabled 0.9.0 cvs snapshot from bug #2589.
mickeyl at openembedded.org:
ecore-native: fix configure options to make it build on systems without EFL headers
alsa: integrate alsa-states recipe into alsa-state
alsa-states: add dummy state
file: update 4.20 to 4.21, 4.21 contains security and build fixes for some archs
fic-gta0[1|2].conf: task-base handle alsa-states, no need to duplicate it here
fic-gta0[0|1].conf: move recommendation of alsa-state(s) from task-openmoko to machine
configuration
add epsilon_cvs to get the shiny new epdf thumbnailer plugin
add epdf, the glue between libpoppler and the EFL
poppler: add recent cvs version since 0.5.9 release doesn't build
add alsa-states, containing the machine specific alsa states.
etk upgrade to 0.1.0.004
remove openmoko-mainmenu, it has been integrated into openmoko-panel-mainmenu
task-openmoko: merge with OpenMoko svn overlay
pfalcon at openembedded.org:
sysfsutils 2.0.0: Fix shlib packaging, symlink was omitted.
linux-handhelds-2.6: Remove adhoc ripping of kernel-image modules.
devimage-image: Add more content.
devimage: Bump PR.
devimage-image, devimage_0.1: Finally, an initrd for kernel testing (minimal userspace
involvment).
h4000.conf, htcblueangel.conf: Blacklist acx from autoloading while PCMCIA support is
buggy yet.
linux-handhelds-2.6: Add support for bunch of new machines.
looxc550: Add Loox C550, fresh hh.org port, but progresses well.
htcalpine.conf, htcapache.conf, htcsable.conf: Add few more HTC devices.
asus620.conf: Typo fix.
asus620.conf: Add Asus MyPal A620.
aximx50.conf, aximx50v.conf: Split up configs for QVGA vs VGA aximx50 models.
opie-taskbar: Add patch to get rid of 1-pix stray gap under taskbar.
qte 2.3.10: kernel-keymap-corgi.patch appears to be safe to be applied
qte 2.3.10: Clean up ipaq_sound_fix.patch stuff.
qte 2.3.10: Remove unused ipaq-keyboard.patch.
qte 2.3.10: Remove deprecated devfs.patch
bitbake.conf: Introduce variables to specify machine's display properties.
linux-handhelds-2.6: Enable PCMCIA for ACX_CS.
linux-handhelds-2.6 2.6.21-hh11: Update defconigs to defconfigman r343.
angstrom-2007.1.conf: Use 2.6.21-hh1 for linux-handhelds-2.6.
linux-handhelds-2.6: Add 2.6.21-hh11.
h4000, htcblueangel: Add pcmciautils to MACHINE_EXTRA.
site/common-glibc: Added ac_cv_func_malloc_0_nonnull & ac_cv_func_memcmp_working
gparted 0.3.3: Add GParted.
parted 1.8.7: Make buildable with latest linux-headers.
parted 1.8.7: Set DEFAULT_PREFERENCE = "-1", requires autoconf 2.61 to be built properly.
task-base.bb: Add explicit dependency on bluez-dtl1-workaround to task-base-bluetooth.
angstrom-2007.1.conf" Bump PREFERRED_VERSION_linux-handhelds-2.6 to "2.6.21-hh10".
linux-handhelds-2.6: Add defconfigs for htcapache & htcsable, defconfigman r322.
polyonymous at openembedded.org:
qmake2-native: install mkspecs into host_sys staging area as well
classes/qt4x11.bbclass, uicmoc4-native: add qt3support
nunome: move to the new opie location
poboxserver: adjust to its new home in /usr
opie-irc: more fixes for utf-8
qte 2.3.10: fixed build for c7x0 with gcc 4
opie-irc: utf8-ize
opie-tinykate: removed multiple occurences of package in PACKAGES
opie-keyview: adjust to the new filesystem layout
opie-keyboard: adjust post{inst,rm} and rpath to the new layout
opie-autorotateapplet: go ${bindir}
konqueror-embedded: fixed and adjusted to the new filesystem layout
qpf-font-common: fonts aren't in /opt/QtPalmtop anymore
opie-init: initscript cosmetics and fixed packaging wrt qpe.conf
pwmpi: move binaries from ${palmtopdir}/bin to ${bindir}
kdepimpi: install binaries into ${bindir} instead of ${palmtopdir}/bin
opie-mailapplet: bump PR to force upgrade to the new layout
opie-mediaplayer1-lib{wav,mad,tremor}plugin: revert unneded fixes, except for PR bumps
opie-mediaplayer1-libwavplugin: go ${palmtopdir} way
opie-mediaplayer1-libtremorplugin: install into ${palmtopdir}
opie-mediaplayer1-libmadplugin: install codec into $palmtopdir
opie-unikeyboard: get into /usr
opie-lockapplet: get out of /opt
opie-dvorak: adjust post{inst,rm} and rpath to the new layout
opie-taskbar: restore opie's restartability
opie-batteryapplet: adjust to the sane prefix
opie-memoryapplet: adjust to the proper prefix
glibc: remove /opt/QtPalmtop/lib from ld.so.conf
opie-clipboardapplet: get /usr-ready.
opie-volumeapplet: adjust to the new filesystem layout
opie-screenshotapplet: opie is not in /opt anymore
opie-pickboard: it's time to be aware of the sane filesystem layout
opie-pcmciaapplet: qcop is in ${bindir} now, isn't it?
opie-multikeyapplet: we're not in /opt anymore
opie-multikey: get the idea of proper filesystem layout
opie-irdaapplet: now aware of filesystem layout too
opie-handwriting: actually bump PR
opie-handwriting: welcome to /usr
opie-clockapplet: make it ready for the new layout
opie-brightnessapplet: adjusted to suit new layout
opie-alarm: adjust for the new filesystem layout
opie-icon-reload: adjust to the new filesystem layout
opie-taskbar-images: update-alternatives for pixmaps.
qemu 0.9.0+cvs: polished .bbs a bit and gave them default preference of -1, anyway
opie-icon-reload: fix packaging. I suppose it will need more once I try the image.
rwhitby at nslu2-linux.org:
fsg3-kernel: Update to latest svn defconfig
gcc-csl-arm-2005q3: Added patch to support big-endian builds of 3.4.4
fsg3-kernel: Default kernel for Freecom FSG-3, with build defaults in fsgbe.conf to
match vendor binary modules.
fsg3be: Machine configuration for the Freecom FSG-3 NAS device.
ixp4xx-npe: Now builds NPE-C as well as NPE-B ethernet microcode.
arm-kernel-shim: Support building for the fsg3 machine
ixp4xx-kernel: Support building for the fsg3 machine
gcc-cross-kernel: Added specific csl 2005q3 version for compiling a kernel to match
the Freecom FSG-3 vendor binary modules.
openssl: Added configure option for gnueabi-armeb
slapin at openembedded.org:
Updated installed modules list for Palm Zire 72
Updated defcinfig for Palm Tungsten T5
Adding support for Palm Treo 650 and Palm Tungsten T5
Palm Zire 72: removed unnecessary modules from config, since they
Palms: unification of configs
linux-hackndev-2.6: bump PR
Fixed Palm Zire 72 battery autoload
Palm Zire 72 machine update
woglinde2 at openembedded.org:
fixing ntp building for uclibc
Shame on me that I broke oe, now I will be more
putting ide-support, so we can use cf-pcmcia adapters or
shame on me, I forget to added the new patches
Simpad updates taken from
obexftp needed same autotools-love because it depends on libiconv
xora at openembedded.org:
libsigc++-2.0_2.0.17.bb : version bump for this package, this builds with
evince_0.9.2.bb : version bump
m4-native_1.4.8.bb : added version 1.4.8 which is needed by some packages
autoconf_2.61.bb : fix a "bug" in autoconf where it treated CONFIG_SITE
packages/glib-2.0/glib.inc : remove bogus ${PN}-dev from packages.
linux-rp_2.6.21.bb : add a hack to prevent connect+ card from oopsing
Bugs fixed:
bug_id resolution short_desc
2289 FIXED Sandisk ConnectPlus oops
2498 INVALID can't run horizon due to faulty ~ path
2544 FIXED Updating gtkmm
2563 WORKSFORME GPE pointer does not accurately track stylus on Zaurus SL-6000
2564 FIXED QT/E fails to build due to lack of asm/page.h
2582 FIXED sd-card is not correctly recognized by kernel
2602 INVALID zaurus c1000 akita touchscreen broken
2606 FIXED Source for db3 archive seems to not be avalible any more.
2608 DUPLICATE asterisk 1.4 bb files
2613 FIXED collie kernel 2.6.21 and modules
2618 WONTFIX Clean spitz.c ALSA driver
2620 INVALID No SD card device on Jul3 Angstrom
2622 INVALID perl-native-5.8.3-r0: task do_compile failed
2639 FIXED ptim_*_svn.bb: Makefile patch isnt required any more
2641 FIXED svn.sf.net renamed to project.svn.sf.net
2642 FIXED alsa-states doesn't build
2495 FIXED akita backlight off after suspend.
2407 FIXED build of sysvinit fails in do_install
Bugs opened:
bug_id resolution short_desc
2644 bad structure of sources/svn directory
2609 xserver-common should have /etc/X11/shepherd.xmodmap
2610 mtd-utils can not be build becuase GIT_AUTHOR_NAME and GIT_COMMITTER_NAME are not set
2611 Perl bitbake file uses wrong define to address the cross linker...
2612 kazekahase segmentation fault
2614 MACHINE_EXTRA_RRECOMMENDS doesn't work
2615 libpng-1.2.12-r5 fails do_install for SharpROM
2616 libxcb-0.9.93-r2 fails do_install for SharpROM
2617 spitz/akita sound mixer misconfiguration
2619 Meta-Bug for SL-C1000 (akita)
2621 Clicking noises shortly after audio is played
2623 QA Issue prevents ewl_0.5.1.009.bb from building
2624 If software's SVN repository changes locations (SRC_URI changed)
2625 gnome-desktop fails to build for arm target (h3900)
2626 altboot on collie ignores key presses
2627 altboot seems unable to mount either SD or CF cards on collie
2630 xrandr doesn't report rotation state
2631 X server returns inconsistent RandR on spitz/akita
2632 icewm is unusable in the default configuration
2633 autoconf-2.61 in OE doesn't handle OE site properly
2634 Newer software requires autconf 2.61 (e.g. parted 1.8.7)
2635 No sleeve driver built on h5000
2636 The corgi_ts driver has a small bug : it doesn't trigger the KEY event it advertises
2637 fixes to make Sharp CE-RH2 remote working in X
2638 ZD1211RW kernel drivers
2640 e17 screen shifted left
2643 Ability to change gpe-clock alarms via gpe-calendar
2645 add obexpushd
2646 updated bb file for ctorrent
2628 No audio driver built for h5000
2629 No wireless driver built for h5000
In total 31 bugs have been created and 18 bugs were closed.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (Darwin)
iD8DBQFGl2gOMkyGM64RGpERAly1AJ9dCPlObUCnqoO9m7DFHGZksNVplQCguGme
9xr+4nuOXbjXw4lI7LQCdlA=
=Fop3
-----END PGP SIGNATURE-----
More information about the Openembedded-devel
mailing list