[oe] Request for a personal git tree for AT91/AVR32
Ulf Samuelsson
ulf.samuelsson at atmel.com
Mon Dec 8 13:44:20 UTC 2008
----- Original Message -----
From: "Sergey Lapin" <slapinid at gmail.com>
To: <openembedded-devel at lists.openembedded.org>
Sent: Monday, December 08, 2008 2:08 PM
Subject: Re: [oe] Request for a personal git tree for AT91/AVR32
> On Mon, Dec 8, 2008 at 4:00 PM, Philip Balister <philip at balister.org>
> wrote:
>> Ulf Samuelsson wrote:
>>>
>>> I have now succeeded (after some hassle) to build
>>> Angstrom for the AT91SAM9263EK using:
>>>
>>> linux-2.6.18-rc7 Requires new recipy
>>> u-boot-1.3.4 Requires new recipy
>>
>> Any chance you could use u-boot-2008.10 instead? I've been meaning to add
>> that version as well.
> why not just use u-boot_git and add version tag? u-boot use time-based
> releases now,
I ran into a problem that linux would not build because if you
use linux and request UIMAGE, then you fail because
u-boot-mkimage is not available.
I then made the linux recipy depend on the u-boot native tools,
and then u-boot.git was selected and oe tried
to do git access to www.angstrom-distribution.org or something similar.
I do not know why, and could not figure out why it did so.
That is why I wrote the new recipy.
> so I don't see real point in using versioned approach.
If you want to add patches they may or may not be broken by a later git
version.
It is more important to have something which has been tested and validated
than the latest stuff.
I agree that it would have been better to use the 2008.10 though.
>
> S.
>
Best Regards
Ulf Samuelsson
>>
>> Philip
>>
>>> dataflashboot.bin Requires a patch and updated recipy.
>>> shasum-native Recipy need bugfix. qemu
>>> Need to update host files for OpenSuSE 10.2.
>>> checksums.ini Needs to be updated with data for four tarballs.
>>>
>>> While doing that, I also updated the machine descriptions for the
>>> at32stk1000 and atngw100 to use the latest u-boot,
>>> and added/cleaned out some machine descriptions for other at91sam9
>>> machines
>>>
>>> Would like to share it with the community,
>>> so access to a personal git tree would be nice.
>>>
>>> Best Regards
>>> Ulf Samuelsson
>>>
>>>
>>>
>>> _______________________________________________
>>> Openembedded-devel mailing list
>>> Openembedded-devel at lists.openembedded.org
>>> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>>>
>>
>> _______________________________________________
>> Openembedded-devel mailing list
>> Openembedded-devel at lists.openembedded.org
>> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>>
>>
>
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel at lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>
More information about the Openembedded-devel
mailing list