[oe] Ideas for scripts, to save work, when building several boards

[Ulf Samuelsson]

Koen Kooi skrev:
> On 13-08-09 12:07, Ulf Samuelsson wrote:
>> Koen Kooi skrev:
>>> On 13-08-09 09:13, Ulf Samuelsson wrote:
>>>> Since I will need to test multiple boards,
>>>> I decided to write some scripts which I will
>>>> check in later today in origin/ulf/linux-2.6.30.2
>>>>
>>>> I generated a "MAKEALL" script which will
>>>> source a file "board_list.sh" with board build commands
>>>>
>>>> <SOF>
>>>> build_board    sam9263dfc    x11-gpe-image
>>>> build_board    sam9g45ek    opie-image
>>>> build_board    sam9g10df    x11-gpe-image
>>>> build_board    sam9g20dfc    console-image
>>>> build_board    sam9260dfc    console-image
>>>> build_board    sam9261df    x11-image
>>>> build_board    sam9xedfc    console-image
>>>> <EOF>
>>>
>>> You do know that you can do that with MACHINE=foo bitbake bar, right?
>>>
>>
>> Didn't try that.
>> I assume this means that the cross compiler is not rebuilt,
> 
> Unless you poked at the gcc recipes, no, it won't get rebuilt.
> 
>> Is the root fs assembled from ipks then?
> 
> if you use rootfs_ipk.bbclass, yes.
> 
> Note that the official angstrom buildguide has mentioned that for years:
> http://www.angstrom-distribution.org/building-angstrom
> 

I guess I can create a separate
"build/conf/<machine>.conf" per machine and link
"build/conf/local.conf" to this file.

if  "MACHINE=<machine> bitbake <whatever>" does not work


> regards,
> 
> Koen
> 
> 
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel at lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel


-- 
Best Regards
Ulf Samuelsson