[oe] Contents of the "origin/ulf/linux-2.6.30.2" branch. Help with testing wanted.

[Ulf Samuelsson]

Marcin Juszkiewicz skrev:
> Dnia sobota, 22 sierpnia 2009 o 19:45:51 Ulf Samuelsson napisał(a):
>> Marcin Juszkiewicz skrev:
> 
>>> Any ideas? I have same problem when 2.12 is used. 1.14 works still.
>> This is the code that will block your progress.
>> Can you provide the first 8 dwords of the image you ae trying to load?
> 
> http://marcin.juszkiewicz.com.pl/download/at91/ contains at91bootstrap files 
> which I checked on board. I tried with at91sam9263ek files before and today 
> with at91sam9263dfc one.
> 
> During week I plan to change at91bootstrap recipe to build all variants for 
> board (so for MACHINE=at91sam9263ek it will build at91sam9263ek, 
> at91sam9263dfc and at91sam9263nf) as ek/dfc/nf are just variants of one board 
> which differ only at at91bootstrap (kernel and userspace is the same). When 
> this will work all machine configs other then *ek can be dropped.
> 

OK, you can run the  MAKEALL script to build everything
and pick from the binaries, I guess, it is quick to build.
Maybe MAKEALL should be

U-boot needs to be built differently as well.
You need to be able to save the environment in:

Long term we need environment in:
nandflash
dataflash_cs0
dataflash_cs1
flash
eeprom
SD-card (maybe this can use EEPROM)



>> Maybe you have not initialized all the trap vectors
>> or you are doing something valid, but unexpected.
>>
>> Are you loading something else than U-Boot?
> 
> U-Boot 2009.08-rc built from your recipe.
> 
Funny, I dont see that.

>> Have now checked the source:
>>
>> The 2.13 is based on the 1.13 sources.
>>
>> The 1,14 source code is not available on the Atmel.
> 
> ftp://www.linux4sam.org/pub/at91bootstrap/AT91Bootstrap1.14.zip
I noticed later, and in fact I have those patches already in 1.13-rc#.
Its been a long summer.

> 
> 
> Regards, 


-- 
Best Regards
Ulf Samuelsson