[oe] SIP recipe can't find Qt4 package in x86 build
Khem Raj
raj.khem at gmail.com
Fri Mar 13 19:38:45 UTC 2009
On Fri, Mar 13, 2009 at 12:11 PM, Rodney Lott <rlott at evertz.com> wrote:
> Hello.
>
> I am new to OE and I couldn't find anything in the devel mailing list archives for Feb and March, so I wanted to ask about the following issue.
>
> I am configured as follows:
>
> OE Build Configuration:
> BB_VERSION = "1.8.13"
> METADATA_BRANCH = "<unknown>"
> METADATA_REVISION = "<unknown>"
> TARGET_ARCH = "i486"
> TARGET_OS = "linux"
> MACHINE = "x86"
> DISTRO = "minimal"
> DISTRO_VERSION = ".dev-snapshot-20090313"
> TARGET_FPU = ""
>
> I am using the following git revision:
>
> commit 12b093a681c4e011062538e4f2c582630997855f
> Author: Bernhard Guillon <Bernhard.Guillon at opensimpad.org>
> Date: Sun Feb 8 16:42:47 2009 +0100
>
> I am not using the latest because this was what I started with and I don't want to pull the latest yet unless it is necessary.
>
> Here's the problem I am having. I have an image recipe that basically contains the following:
>
> require packages/images/minimal-image.bb
>
> IMAGE_INSTALL += "cron"
> IMAGE_INSTALL += "ntp"
>
> export IMAGE_BASENAME = "cp2210e"
>
> If I build with this, everything is peachy and I get my minimalist image with ntp and cron installed. I then add more IMAGE_INSTALL lines after the ntp line:
>
> IMAGE_INSTALL += "python"
> IMAGE_INSTALL += "python-twisted"
> IMAGE_INSTALL += "python-pyqt"
>
> The build goes on fine for a while and it stops at this:
>
> NOTE: Running task 765 of 1189 (ID: 532, /home/rlott/openembedded.git/packages/sip/sip-native_4.7.7.bb, do_configure)
You are building sip-native recipe so looking into host tool staging
is right here. So this file should either come from your host
installation of qt-devel or from qt-native package(if there exists
one) which ever provides it. You might want to make sip-native
DEPENDS on this package.
Thx
-Khem
More information about the Openembedded-devel
mailing list