[oe] Error building libgles-omap3
Elvis Dowson
elvis.dowson at mac.com
Wed Aug 4 07:03:18 UTC 2010
Hi,
I managed to fix the checksum error by modifying the conf/checksum.ini file and adding the following entries
[http://install.source.dir.local/OMAP35x_Graphics_SDK_setuplinux_3_01_00_06.bin]
md5=7aa37ca72f34011d353e72cc67f8aac1
sha256=02276bc728699c36b0d2411c60f23030aa066ca6b8ed5adb7a40204563a227fb
but now I get a slew of errors:
ERROR: function do_compile failed
ERROR: log data follows (/tool/overo-oe/tmp/work/beagleboard-angstrom-linux-gnueabi/omap3-sgx-modules-1.4.14.2616-r51b/temp/log.do_compile.29401)
| NOTE: make -j 6 -e MAKEFLAGS= KERNEL_PATH=/tool/overo-oe/tmp/staging/beagleboard-angstrom-linux-gnueabi/kernel KERNEL_SRC=/tool/overo-oe/tmp/staging/beagleboard-angstrom-linux-gnueabi/kernel KDIR=/tool/overo-oe/tmp/staging/beagleboard-angstrom-linux-gnueabi/kernel KERNELDIR=/tool/overo-oe/tmp/staging/beagleboard-angstrom-linux-gnueabi/kernel KERNEL_VERSION=2.6.35 CC=ccache arm-angstrom-linux-gnueabi-gcc LD=arm-angstrom-linux-gnueabi-ld AR=arm-angstrom-linux-gnueabi-ar BUILD=release TI_PLATFORM=omap3630
| make -C /tool/overo-oe/tmp/staging/beagleboard-angstrom-linux-gnueabi/kernel M=`pwd`
| make[1]: Entering directory `/tool/overo-oe/tmp/staging/beagleboard-angstrom-linux-gnueabi/kernel'
|
| ERROR: Kernel configuration is invalid.
| include/generated/autoconf.h or include/config/auto.conf are missing.
| Run 'make oldconfig && make prepare' on kernel src to fix it.
|
| LD /tool/overo-oe/tmp/work/beagleboard-angstrom-linux-gnueabi/omap3-sgx-modules-1.4.14.2616-r51b/OMAP35x_Graphics_SDK_3_01_00_06/GFX_Linux_KM/services4/3rdparty/bufferclass_ti/built-in.o
| CC [M] /tool/overo-oe/tmp/work/beagleboard-angstrom-linux-gnueabi/omap3-sgx-modules-1.4.14.2616-r51b/OMAP35x_Graphics_SDK_3_01_00_06/GFX_Linux_KM/services4/3rdparty/bufferclass_ti/bc_cat.o
| cc1: error: include/generated/autoconf.h: No such file or directory
| In file included from /tool/overo-oe/tmp/staging/beagleboard-angstrom-linux-gnueabi/kernel/arch/arm/include/asm/system.h:328,
| from /tool/overo-oe/tmp/staging/beagleboard-angstrom-linux-gnueabi/kernel/arch/arm/include/asm/bitops.h:27,
| from include/linux/bitops.h:22,
| from include/linux/kernel.h:17,
| from /tool/overo-oe/tmp/work/beagleboard-angstrom-linux-gnueabi/omap3-sgx-modules-1.4.14.2616-r51b/OMAP35x_Graphics_SDK_3_01_00_06/GFX_Linux_KM/services4/3rdparty/bufferclass_ti/bc_cat.c:28:
| include/asm-generic/cmpxchg-local.h: In function ‘__cmpxchg_local_generic’:
| include/asm-generic/cmpxchg-local.h:23: error: implicit declaration of function ‘local_irq_save’
| include/asm-generic/cmpxchg-local.h:44: error: implicit declaration of function ‘local_irq_restore’
| In file included from include/linux/list.h:6,
| from include/linux/module.h:9,
| from /tool/overo-oe/tmp/work/beagleboard-angstrom-linux-gnueabi/omap3-sgx-modules-1.4.14.2616-r51b/OMAP35x_Graphics_SDK_3_01_00_06/GFX_Linux_KM/services4/3rdparty/bufferclass_ti/bc_cat.c:29:
| include/linux/prefetch.h: In function ‘prefetch_range’:
| include/linux/prefetch.h:59: error: ‘CONFIG_ARM_L1_CACHE_SHIFT’ undeclared (first use in this function)
| include/linux/prefetch.h:59: error: (Each undeclared identifier is reported only once
| include/linux/prefetch.h:59: error: for each function it appears in.)
| In file included from include/linux/seqlock.h:29,
| from include/linux/time.h:8,
| from include/linux/stat.h:60,
| from include/linux/module.h:10,
| from /tool/overo-oe/tmp/work/beagleboard-angstrom-linux-gnueabi/omap3-sgx-modules-1.4.14.2616-r51b/OMAP35x_Graphics_SDK_3_01_00_06/GFX_Linux_KM/services4/3rdparty/bufferclass_ti/bc_cat.c:29:
| include/linux/spinlock.h: In function ‘spin_lock_irq’:
| include/linux/spinlock.h:309: error: implicit declaration of function ‘local_irq_disable’
| include/linux/spinlock.h: In function ‘spin_unlock_irq’:
| include/linux/spinlock.h:334: error: implicit declaration of function ‘local_irq_enable’
| In file included from include/linux/gfp.h:4,
| from include/linux/kmod.h:22,
| from include/linux/module.h:13,
| from /tool/overo-oe/tmp/work/beagleboard-angstrom-linux-gnueabi/omap3-sgx-modules-1.4.14.2616-r51b/OMAP35x_Graphics_SDK_3_01_00_06/GFX_Linux_KM/services4/3rdparty/bufferclass_ti/bc_cat.c:29:
| include/linux/mmzone.h:18:30: error: generated/bounds.h: No such file or directory
| include/linux/mmzone.h:252:5: warning: "MAX_NR_ZONES" is not defined
| In file included from include/linux/gfp.h:4,
| from include/linux/kmod.h:22,
| from include/linux/module.h:13,
| from /tool/overo-oe/tmp/work/beagleboard-angstrom-linux-gnueabi/omap3-sgx-modules-1.4.14.2616-r51b/OMAP35x_Graphics_SDK_3_01_00_06/GFX_Linux_KM/services4/3rdparty/bufferclass_ti/bc_cat.c:29:
| include/linux/mmzone.h: At top level:
| include/linux/mmzone.h:294: error: ‘MAX_NR_ZONES’ undeclared here (not in a function)
| In file included from include/linux/notifier.h:14,
| from include/linux/memory_hotplug.h:6,
| from include/linux/mmzone.h:651,
| from include/linux/gfp.h:4,
| from include/linux/kmod.h:22,
| from include/linux/module.h:13,
| from /tool/overo-oe/tmp/work/beagleboard-angstrom-linux-gnueabi/omap3-sgx-modules-1.4.14.2616-r51b/OMAP35x_Graphics_SDK_3_01_00_06/GFX_Linux_KM/services4/3rdparty/bufferclass_ti/bc_cat.c:29:
| include/linux/rwsem.h:22:65: error: asm/rwsem.h: No such file or directory
| In file included from include/linux/memory_hotplug.h:6,
| from include/linux/mmzone.h:651,
| from include/linux/gfp.h:4,
| from include/linux/kmod.h:22,
| from include/linux/module.h:13,
| from /tool/overo-oe/tmp/work/beagleboard-angstrom-linux-gnueabi/omap3-sgx-modules-1.4.14.2616-r51b/OMAP35x_Graphics_SDK_3_01_00_06/GFX_Linux_KM/services4/3rdparty/bufferclass_ti/bc_cat.c:29:
| include/linux/notifier.h:62: error: field ‘rwsem’ has incomplete type
| In file included from include/linux/ktime.h:25,
| from include/linux/timer.h:5,
| from include/linux/workqueue.h:8,
| from include/linux/kmod.h:26,
| from include/linux/module.h:13,
| from /tool/overo-oe/tmp/work/beagleboard-angstrom-linux-gnueabi/omap3-sgx-modules-1.4.14.2616-r51b/OMAP35x_Graphics_SDK_3_01_00_06/GFX_Linux_KM/services4/3rdparty/bufferclass_ti/bc_cat.c:29:
| include/linux/jiffies.h:18:5: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:20:7: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:22:7: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:24:7: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:26:7: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:28:7: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:30:7: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:32:7: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:34:7: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:36:7: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:39:3: error: #error Invalid value of HZ.
| include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:257:31: error: division by zero in #if
| include/linux/jiffies.h:257:31: error: division by zero in #if
| include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:257:31: error: division by zero in #if
| include/linux/jiffies.h:257:31: error: division by zero in #if
| include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:257:31: error: division by zero in #if
| include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:257:31: error: division by zero in #if
| include/linux/jiffies.h:257:31: error: division by zero in #if
| include/linux/jiffies.h:257:31: error: division by zero in #if
| include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:257:31: error: division by zero in #if
| include/linux/jiffies.h:257:31: error: division by zero in #if
| include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:257:31: error: division by zero in #if
| include/linux/jiffies.h:257:31: error: division by zero in #if
| include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:257:31: error: division by zero in #if
| include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:257:31: error: division by zero in #if
| include/linux/jiffies.h:257:31: error: division by zero in #if
| include/linux/jiffies.h:257:31: error: division by zero in #if
| include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:257:31: error: division by zero in #if
| include/linux/jiffies.h:257:31: error: division by zero in #if
| include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:257:31: error: division by zero in #if
| include/linux/jiffies.h:257:31: error: division by zero in #if
| include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:257:31: error: division by zero in #if
| include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:257:31: error: division by zero in #if
| include/linux/jiffies.h:257:31: error: division by zero in #if
| include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:257:31: error: division by zero in #if
| include/linux/jiffies.h:257:31: error: division by zero in #if
| include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:257:31: error: division by zero in #if
| include/linux/jiffies.h:257:31: error: division by zero in #if
| include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:257:31: error: division by zero in #if
| include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:257:31: warning: "CONFIG_HZ" is not defined
| include/linux/jiffies.h:257:31: error: division by zero in #if
| include/linux/jiffies.h:257:31: error: division by zero in #if
| include/linux/jiffies.h:257:31: error: division by zero in #if
| include/linux/jiffies.h:257:46: warning: "SHIFT_HZ" is not defined
| In file included from include/linux/tracepoint.h:19,
| from include/linux/module.h:18,
| from /tool/overo-oe/tmp/work/beagleboard-angstrom-linux-gnueabi/omap3-sgx-modules-1.4.14.2616-r51b/OMAP35x_Graphics_SDK_3_01_00_06/GFX_Linux_KM/services4/3rdparty/bufferclass_ti/bc_cat.c:29:
| include/linux/rcupdate.h:73:2: error: #error "Unknown RCU implementation specified to kernel configuration"
| In file included from include/linux/tracepoint.h:19,
| from include/linux/module.h:18,
| from /tool/overo-oe/tmp/work/beagleboard-angstrom-linux-gnueabi/omap3-sgx-modules-1.4.14.2616-r51b/OMAP35x_Graphics_SDK_3_01_00_06/GFX_Linux_KM/services4/3rdparty/bufferclass_ti/bc_cat.c:29:
| include/linux/rcupdate.h: In function ‘rcu_read_lock’:
| include/linux/rcupdate.h:312: error: implicit declaration of function ‘__rcu_read_lock’
| include/linux/rcupdate.h: In function ‘rcu_read_unlock’:
| include/linux/rcupdate.h:336: error: implicit declaration of function ‘__rcu_read_unlock’
| include/linux/rcupdate.h: In function ‘rcu_read_lock_bh’:
| include/linux/rcupdate.h:352: error: implicit declaration of function ‘__rcu_read_lock_bh’
| include/linux/rcupdate.h: In function ‘rcu_read_unlock_bh’:
| include/linux/rcupdate.h:366: error: implicit declaration of function ‘__rcu_read_unlock_bh’
| In file included from include/linux/module.h:18,
| from /tool/overo-oe/tmp/work/beagleboard-angstrom-linux-gnueabi/omap3-sgx-modules-1.4.14.2616-r51b/OMAP35x_Graphics_SDK_3_01_00_06/GFX_Linux_KM/services4/3rdparty/bufferclass_ti/bc_cat.c:29:
| include/linux/tracepoint.h: In function ‘tracepoint_synchronize_unregister’:
| include/linux/tracepoint.h:80: error: implicit declaration of function ‘synchronize_sched’
| In file included from include/linux/fs.h:472,
| from /tool/overo-oe/tmp/work/beagleboard-angstrom-linux-gnueabi/omap3-sgx-modules-1.4.14.2616-r51b/OMAP35x_Graphics_SDK_3_01_00_06/GFX_Linux_KM/services4/3rdparty/bufferclass_ti/bc_cat.c:30:
| include/linux/quota.h: At top level:
| include/linux/quota.h:396: error: field ‘dqptr_sem’ has incomplete type
| In file included from /tool/overo-oe/tmp/work/beagleboard-angstrom-linux-gnueabi/omap3-sgx-modules-1.4.14.2616-r51b/OMAP35x_Graphics_SDK_3_01_00_06/GFX_Linux_KM/services4/3rdparty/bufferclass_ti/bc_cat.c:30:
| include/linux/fs.h:750: error: field ‘i_alloc_sem’ has incomplete type
| In file included from /tool/overo-oe/tmp/work/beagleboard-angstrom-linux-gnueabi/omap3-sgx-modules-1.4.14.2616-r51b/OMAP35x_Graphics_SDK_3_01_00_06/GFX_Linux_KM/services4/3rdparty/bufferclass_ti/bc_cat.c:30:
| include/linux/fs.h:1334: error: field ‘s_umount’ has incomplete type
| In file included from include/linux/mm.h:14,
| from include/linux/scatterlist.h:6,
| from include/linux/dma-mapping.h:7,
| from /tool/overo-oe/tmp/work/beagleboard-angstrom-linux-gnueabi/omap3-sgx-modules-1.4.14.2616-r51b/OMAP35x_Graphics_SDK_3_01_00_06/GFX_Linux_KM/services4/3rdparty/bufferclass_ti/bc_cat.c:38:
| include/linux/mm_types.h:65:5: warning: "CONFIG_SPLIT_PTLOCK_CPUS" is not defined
| include/linux/mm_types.h:206:5: warning: "CONFIG_SPLIT_PTLOCK_CPUS" is not defined
| In file included from include/linux/mm.h:14,
| from include/linux/scatterlist.h:6,
| from include/linux/dma-mapping.h:7,
| from /tool/overo-oe/tmp/work/beagleboard-angstrom-linux-gnueabi/omap3-sgx-modules-1.4.14.2616-r51b/OMAP35x_Graphics_SDK_3_01_00_06/GFX_Linux_KM/services4/3rdparty/bufferclass_ti/bc_cat.c:38:
| include/linux/mm_types.h:240: error: field ‘mmap_sem’ has incomplete type
| In file included from include/linux/slab_def.h:168,
| from include/linux/slab.h:172,
| from /tool/overo-oe/tmp/staging/beagleboard-angstrom-linux-gnueabi/kernel/arch/arm/include/asm/pgtable-nommu.h:16,
| from /tool/overo-oe/tmp/staging/beagleboard-angstrom-linux-gnueabi/kernel/arch/arm/include/asm/pgtable.h:18,
| from include/linux/mm.h:40,
| from include/linux/scatterlist.h:6,
| from include/linux/dma-mapping.h:7,
| from /tool/overo-oe/tmp/work/beagleboard-angstrom-linux-gnueabi/omap3-sgx-modules-1.4.14.2616-r51b/OMAP35x_Graphics_SDK_3_01_00_06/GFX_Linux_KM/services4/3rdparty/bufferclass_ti/bc_cat.c:38:
| include/linux/kmalloc_sizes.h:5:5: warning: "CONFIG_ARM_L1_CACHE_SHIFT" is not defined
| include/linux/kmalloc_sizes.h:9:5: warning: "CONFIG_ARM_L1_CACHE_SHIFT" is not defined
| In file included from include/linux/scatterlist.h:6,
| from include/linux/dma-mapping.h:7,
| from /tool/overo-oe/tmp/work/beagleboard-angstrom-linux-gnueabi/omap3-sgx-modules-1.4.14.2616-r51b/OMAP35x_Graphics_SDK_3_01_00_06/GFX_Linux_KM/services4/3rdparty/bufferclass_ti/bc_cat.c:38:
| include/linux/mm.h: In function ‘virt_to_head_page’:
| include/linux/mm.h:324: error: implicit declaration of function ‘__pfn_to_page’
| include/linux/mm.h:324: warning: initialization makes pointer from integer without a cast
| In file included from include/linux/scatterlist.h:6,
| from include/linux/dma-mapping.h:7,
| from /tool/overo-oe/tmp/work/beagleboard-angstrom-linux-gnueabi/omap3-sgx-modules-1.4.14.2616-r51b/OMAP35x_Graphics_SDK_3_01_00_06/GFX_Linux_KM/services4/3rdparty/bufferclass_ti/bc_cat.c:38:
| include/linux/mm.h:461:63: warning: "NR_PAGEFLAGS" is not defined
| include/linux/mm.h:509:62: warning: "NR_PAGEFLAGS" is not defined
| In file included from include/linux/scatterlist.h:6,
| from include/linux/dma-mapping.h:7,
| from /tool/overo-oe/tmp/work/beagleboard-angstrom-linux-gnueabi/omap3-sgx-modules-1.4.14.2616-r51b/OMAP35x_Graphics_SDK_3_01_00_06/GFX_Linux_KM/services4/3rdparty/bufferclass_ti/bc_cat.c:38:
| include/linux/mm.h: In function ‘lowmem_page_address’:
| include/linux/mm.h:599: error: implicit declaration of function ‘__page_to_pfn’
| include/linux/mm.h:1058:5: warning: "CONFIG_SPLIT_PTLOCK_CPUS" is not defined
| In file included from include/linux/dma-mapping.h:7,
| from /tool/overo-oe/tmp/work/beagleboard-angstrom-linux-gnueabi/omap3-sgx-modules-1.4.14.2616-r51b/OMAP35x_Graphics_SDK_3_01_00_06/GFX_Linux_KM/services4/3rdparty/bufferclass_ti/bc_cat.c:38:
| include/linux/scatterlist.h: In function ‘sg_set_buf’:
| include/linux/scatterlist.h:112: warning: passing argument 2 of ‘sg_set_page’ makes pointer from integer without a cast
| /tool/overo-oe/tmp/work/beagleboard-angstrom-linux-gnueabi/omap3-sgx-modules-1.4.14.2616-r51b/OMAP35x_Graphics_SDK_3_01_00_06/GFX_Linux_KM/services4/3rdparty/bufferclass_ti/bc_cat.c: In function ‘bc_cat_init’:
| /tool/overo-oe/tmp/work/beagleboard-angstrom-linux-gnueabi/omap3-sgx-modules-1.4.14.2616-r51b/OMAP35x_Graphics_SDK_3_01_00_06/GFX_Linux_KM/services4/3rdparty/bufferclass_ti/bc_cat.c:490: error: implicit declaration of function ‘omap_rev_lt_3_0’
| make[3]: *** [/tool/overo-oe/tmp/work/beagleboard-angstrom-linux-gnueabi/omap3-sgx-modules-1.4.14.2616-r51b/OMAP35x_Graphics_SDK_3_01_00_06/GFX_Linux_KM/services4/3rdparty/bufferclass_ti/bc_cat.o] Error 1
| make[2]: *** [/tool/overo-oe/tmp/work/beagleboard-angstrom-linux-gnueabi/omap3-sgx-modules-1.4.14.2616-r51b/OMAP35x_Graphics_SDK_3_01_00_06/GFX_Linux_KM/services4/3rdparty/bufferclass_ti] Error 2
| make[1]: *** [_module_/tool/overo-oe/tmp/work/beagleboard-angstrom-linux-gnueabi/omap3-sgx-modules-1.4.14.2616-r51b/OMAP35x_Graphics_SDK_3_01_00_06/GFX_Linux_KM] Error 2
| make[1]: Leaving directory `/tool/overo-oe/tmp/staging/beagleboard-angstrom-linux-gnueabi/kernel'
| make: *** [all] Error 2
| FATAL: oe_runmake failed
NOTE: Task failed: /tool/overo-oe/tmp/work/beagleboard-angstrom-linux-gnueabi/omap3-sgx-modules-1.4.14.2616-r51b/temp/log.do_compile.29401
ERROR: TaskFailed event exception, aborting
ERROR: Build of /tool/overo-oe/user.collection/recipes/powervr-drivers/omap3-sgx-modules_1.4.14.2616.bb do_compile failed
ERROR: Task 916 (/tool/overo-oe/user.collection/recipes/powervr-drivers/omap3-sgx-modules_1.4.14.2616.bb, do_compile) failed
NOTE: Waiting for 1 active tasks to finish
NOTE: 1: /tool/overo-oe/user.collection/recipes/powervr-drivers/libgles-omap3_3.01.00.06.bb, do_configure (28495)
NOTE: Tasks Summary: Attempted 3201 tasks of which 3189 didn't need to be rerun and 1 failed.
ERROR: '/tool/overo-oe/user.collection/recipes/powervr-drivers/omap3-sgx-modules_1.4.14.2616.bb' failed
Best regards,
Elvis Dowson
More information about the Openembedded-devel
mailing list