[oe] create ipk failed...

Denys Dmytriyenko denis at denix.org
Thu May 6 06:15:33 UTC 2010


On Thu, May 06, 2010 at 11:19:46AM +0800, yenchengwang wrote:
> >
> > hi all,
> >     I have a problem when try to "bitbake -b recipes/minicom/
> > minicom-mypkg_2.4.bb"
> >
> >     the bellow is the content of my bb file:
> >     file name is minicom-mypkg_2.4.bb
> > *********************************************************************************************************
> >
> >     SECTION = "console/network"
> >     DEPENDS = "ncurses"
> >     LICENSE = "GPL"
> >
> >     SRC_URI = "
> > https://alioth.debian.org/frs/download.php/3195/minicom-${PV}.tar.gz<https://alioth.debian.org/frs/download.php/3195/minicom-$%7BPV%7D.tar.gz>
> > "
> >     S = "${WORKDIR}/minicom-${PV}"
> >     PR = "r0"
> >
> >     inherit autotools gettext
> >
> >     do_configure() {
> >         ./configure --host = arm
> >     }
> >
> >     do_install() {
> >         autotools_do_install
> >     }
> >
> > *********************************************************************************************************
> >
> > then bitbake -b recipes/minicom/minicom-mypkg_2.4.bb, I always get the
> > below messages:
> >
> >
> > ****************************************************************************************************************************************************************
> > NOTE: the following files were installed but not shipped in any package:

The above message says it all - your files are installed in /usr/local and not 
being added to any package, that's why they are all empty.

> > NOTE: /usr/local/share/man/man1/ascii-xfr.1
> > NOTE: /usr/local/share/man/man1/minicom.1
> > NOTE: /usr/local/share/man/man1/xminicom.1
> > NOTE: /usr/local/share/man/man1/runscript.1
> > ... ignored
> > NOTE: /usr/local/bin/xminicom
> > NOTE: /usr/local/bin/ascii-xfr
> > NOTE: /usr/local/bin/minicom
> > NOTE: /usr/local/bin/runscript
> > NOTE: /usr/local/bin/.debug/ascii-xfr
> > NOTE: /usr/local/bin/.debug/minicom
> > NOTE: /usr/local/bin/.debug/runscript
> > NOTE: Running task 12 of 17 (ID: 10, /home/rd/oe/build/recipes/minicom/
> > minicom-mypkg_2.4.bb, do_qa_staging)
> > NOTE: Running task 13 of 17 (ID: 16, /home/rd/oe/build/recipes/minicom/
> > minicom-mypkg_2.4.bb, do_package_write_ipk)
> > Packaged contents of minicom-mypkg-dbg into
> > /home/rd/oe/build/tmp/deploy/glibc/ipk/armv5te/minicom-mypkg-dbg_2.4-r0.5_armv5te.ipk
> > NOTE: Not creating empty archive for minicom-mypkg-2.4-r0.5
> > NOTE: Not creating empty archive for minicom-mypkg-doc-2.4-r0.5
> > Packaged contents of minicom-mypkg-dev into
> > /home/rd/oe/build/tmp/deploy/glibc/ipk/armv5te/minicom-mypkg-dev_2.4-r0.5_armv5te.ipk
> > NOTE: Not creating empty archive for minicom-mypkg-static-2.4-r0.5
> > NOTE: Not creating empty archive for minicom-mypkg-locale-2.4-r0.5
> > ...ignored
> >
> > ****************************************************************************************************************************************************************
> >
> > I have no idea why I always get these messages...
> > NOTE: Not creating empty archive for minicom-mypkg-2.4-r0.5
> > NOTE: Not creating empty archive for minicom-mypkg-doc-2.4-r0.5
> > NOTE: Not creating empty archive for minicom-mypkg-static-2.4-r0.5
> > NOTE: Not creating empty archive for minicom-mypkg-locale-2.4-r0.5
> >
> > any information is appreciate !!




More information about the Openembedded-devel mailing list