[oe] [hawkboard] OE Kernel Not Booting

[Koen Kooi]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On 18-05-10 10:10, Christophe Aeschlimann wrote:
> Le 18.05.2010 09:30, Koen Kooi a écrit :
> On 18-05-10 09:27, Christophe Aeschlimann wrote:
>>>> Hi,
>>>>
>>>> We are at least three hawkboard owners that have the same issue.
>>>>
>>>> Building org.openembedded.dev HEAD with
>>>>
>>>> MACHINE= "hawkboard"
>>>> DISTRO = "angstrom-2008.1"
>>>>
>>>> produces a Kernel Image that cannot be booted on our hawkboards.
>>>>
>>>> The behaviour is the following with the following kernel bootargs :
>>>>
>>>> console=ttyS2,115200n8 root=/dev/nfs
>>>> nfsroot=172.16.147.10:/srv/nfs/hawkboard ip=172.16.100.100
>>>> eth=0a:c1:a8:12:fa:c0
>>>>
>>>>> U-Boot 2009.01-dirty (Nov 26 2009 - 02:15:00)
> 
> Try the OE built u-boot.
> 
>> Hi Koen,
> 
>> I haven't been able to boot using the OE generated u-boot so far.
> 
>> But I'm a bit confused about how everything is working together.
> 
>> Don't you have to generate an AIS image using AISGen and the OE
>> generated u-boot image before flashing it in the UBL partition
>> (beginning of the second erase block) ?

Not that I know of. I flashed uboot using tftp and that seemed to work
fine. That was on a prototype hawkboard which has released it magic
smoke since then.

regards,

Koen
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (Darwin)

iD8DBQFL8nYpMkyGM64RGpERAqugAJ99oUDfVGTJAbIs8AQwR1HA/9iTdwCffwgQ
B6yfaXpEm0axylpQQu6q5v0=
=H6Ac
-----END PGP SIGNATURE-----