[oe] external-toolchain-csl-1.0-r6 fails

[Víctor M. Jáquez L.]

On Wed, Nov 24, 2010 at 11:22:44PM -0500, Ben Gardiner wrote:
> Hi All,
> 
> Sorry to jump in so late.
> 
> On Tue, Nov 23, 2010 at 2:28 PM, Tom Rini <tom_rini at mentor.com> wrote:
> > So to be clear, there is, or is not, another solution for using a
> > non-angstrom toolchain to build angstrom?
> 
> I ran into this once and I'm happy to say that there is a solution
> [1]. It was committed [2] by Denys Dmytriyenko and Signed off by Koen
> Kooi [3].
> 
> 2010/11/23 Víctor M. Jáquez L. <vjaquez at igalia.com>:
> > I'm using the openembedded's branch org.openembedded.dev (HEAD)
> >
> > my local.conf
> > [...]
> > # enable following line to use CodeSourcery Lite
> > TARGET_VENDOR := "-none"
> > TOOLCHAIN_TYPE := "external"
> > TOOLCHAIN_BRAND := "csl"
> 
> I think you'll find that you are able to build using CSL if you use
> TOOLCHAIN_VENDOR instead of TARGET_VENDOR in your local.conf. I tested
> with CSL's 2009q1 -- YMMV.

It works! Thanks a lot for the clarification and sorry for the noise.

vmjl

> 
> Best Regards,
> Ben Gardiner
> 
> [1] http://article.gmane.org/gmane.comp.handhelds.openembedded/38201
> [2] http://cgit.openembedded.org/cgit.cgi/openembedded/commit/?id=f3b29a03710280fda6561b37313a56dd759befac
> [3] http://article.gmane.org/gmane.comp.handhelds.openembedded/38212
> 
> ---
> Nanometrics Inc.
> http://www.nanometrics.ca
>