[oe] Can someone help me understand these errors I got in my build

Thu Sep 2 21:22:20 UTC 2010

On Thu, Sep 2, 2010 at 4:36 AM, Graham Gower <graham.gower at gmail.com> wrote:
> On 2 September 2010 17:30, J. L. <vwyodapink at gmail.com> wrote:
>> When it was going through the final stages in my build I ended up with
>> some conflict errors and not sure if I understand how to fix this
>> properly. Do I just remove what its says is why it cant install one
>> file because another is trying to install the same file ? Or? But I
>> dont think I am understanding these correctly as I have never gotten
>> them before. I would really appreciate any help on this one so I can
>> get my image packaged now that everything is built. Also I can post my
>> image I am trying to build if that helps its a very bloated desktop
>> image, here is the error:
>>
>> also I tried to clean it by doing bitbake -c clean and then bitbake
>> myimage but still same result.
>>
>> | Collected errors:
>> |  * check_data_file_clashes: Package kernel-firmware-down3 wants to
>> install file /home/vdubhack/overo-oe/tmp/rootfs/UAV-Dimage/lib/firmware/edgeport/down3.bin
>> |       But that file is already provided by package  * linux-firmware
>
> These two packages cannot be installed on the same system. There are
> two possibilities for fixing this: either don't included both packages
> in the same image or remove the file from one of the packages.
>> |  * opkg_install_cmd: Cannot install package task-base-extended.
>
> For whatever reason, the task-base-extended ipk cannot be found in
> your package repository. There are many reasons why this may occur and
> I will not speculate upon it.
>
>> |  * check_data_file_clashes: Package rt73-firmware wants to install
>> file /home/vdubhack/overo-oe/tmp/rootfs/UAV-Dimage/lib/firmware/rt73.bin
>> |       But that file is already provided by package  * linux-firmware
>> |  * opkg_install_cmd: Cannot install package rt73-firmware.
>> |  * opkg_install_cmd: Cannot install package libnet.
>> |  * check_data_file_clashes: Package glproto-dev wants to install
>> file /home/vdubhack/overo-oe/tmp/rootfs/UAV-Dimage/usr/include/GL/internal/glcore.h
>> |       But that file is already provided by package  * libgl-dev
>> |  * opkg_install_cmd: Cannot install package artoolkit-dev.
>> |  * satisfy_dependencies_for: Cannot satisfy the following
>> dependencies for task-sdk-native:
>> |  *    libdbd-sqlite-perl *    libdbix-simple-perl *
>
> The libdbd-sqlite-perl and libdbix-simple-perl ipks cannot be found in
> your repository.
>
>> |  * opkg_install_cmd: Cannot install package task-native-sdk.
>> |  * check_data_file_clashes: Package python-zopeinterface wants to
>> install file /home/vdubhack/overo-oe/tmp/rootfs/UAV-Dimage/usr/lib/python2.6/site-packages/setuptools.pth
>> |       But that file is already provided by package  * python-setuptools
>> |  * check_data_file_clashes: Package python-zopeinterface wants to
>> install file /home/vdubhack/overo-oe/tmp/rootfs/UAV-Dimage/usr/lib/python2.6/site-packages/site.pyo
>> |       But that file is already provided by package  * python-setuptools
>> |  * check_data_file_clashes: Package python-zopeinterface wants to
>> install file /home/vdubhack/overo-oe/tmp/rootfs/UAV-Dimage/usr/lib/python2.6/site-packages/site.py
>> |       But that file is already provided by package  * python-setuptools
>> |  * check_data_file_clashes: Package python-zopeinterface wants to
>> install file /home/vdubhack/overo-oe/tmp/rootfs/UAV-Dimage/usr/bin/easy_install-2.6
>> |       But that file is already provided by package  * python-setuptools
>> |  * check_data_file_clashes: Package python-zopeinterface wants to
>> install file /home/vdubhack/overo-oe/tmp/rootfs/UAV-Dimage/usr/bin/easy_install
>> |       But that file is already provided by package  * python-setuptools
>> |  * opkg_install_cmd: Cannot install package python-twisted.
>> |  * opkg_install_cmd: Cannot install package gst-plugin-video4linux2.
>> |  * resolve_conffiles: Existing conffile
>> /home/vdubhack/overo-oe/tmp/rootfs/UAV-Dimage/etc/device_table is
>> different from the conffile in the new package. The new conffile will
>> be placed at /home/vdubhack/overo-oe/tmp/rootfs/UAV-Dimage/etc/device_table-opkg.
>
> Two packages both provide the same config file. This should really
> error out, but its only a warning at the moment because it would cause
> too many breakages (the message printing is deferred until the end of
> opkg's processing, like an error).
>
>> |  * check_data_file_clashes: Package gpe-theme-clearlooks wants to
>> install file /home/vdubhack/overo-oe/tmp/rootfs/UAV-Dimage/usr/share/themes/Clearlooks/gtk-2.0/gtkrc
>> |       But that file is already provided by package  * gtk-theme-clearlooks
>> |  * opkg_install_cmd: Cannot install package gpe-session-scripts.
>> NOTE: Task failed:
>> /home/vdubhack/overo-oe/tmp/work/overo-angstrom-linux-gnueabi/UAV-Dimage-1.0-r0/temp/log.do_rootfs.4216
>> NOTE: oestats: task failed, see
>> http://tinderbox.openembedded.net/public/logs/task/7541484.txt
>> ERROR: TaskFailed event exception, aborting
>> ERROR: Build of
>> /home/vdubhack/overo-oe/user.collection/recipes/images/UAV-Dimage.bb
>> do_rootfs failed
>> ERROR: Task 11 (/home/vdubhack/overo-oe/user.collection/recipes/images/UAV-Dimage.bb,
>> do_rootfs) failed
>> NOTE: Tasks Summary: Attempted 11557 tasks of which 11540 didn't need
>> to be rerun and 1 failed.
>> ERROR: '/home/vdubhack/overo-oe/user.collection/recipes/images/UAV-Dimage.bb'
>> failed
>> NOTE: oestats: build failed, see http://tinderbox.openembedded.net/builds/85611/
>>
>>
>> Thanks as always !
>>
>> _______________________________________________
>> Openembedded-devel mailing list
>> Openembedded-devel at lists.openembedded.org
>> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>>
>
> I suggest you start with a much smaller image and add to it
> incrementally. That way, if/when you encounter problems, it is much
> easier to narrow down which recipe or recipe dependency is causing
> problems. Building a dependency graph with bitbake -g may help narrow
> down some problems.
>
> -Graham
>
> PS: I appreciate that opkg error messages can be a little cryptic.
> Patches welcome!
>
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel at lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>

Thanks for the more clear break down I am sorting through everything
now and getting a little further. I will soon start working towards
learning the patching and recipe procedures. If I run into anymore
issues I will post back on this thread