[oe] using i2c on a mx28evk

[Mats Kärrman]

Hi,

Some "generic" clues:
Kernel modules are installed in the file system by adding "kernel-modules" to "IMAGE_INSTALL". 
Some packages build their modules separately and then you need to add something like "kernel-module-XYZ" to "IMAGE_INSTALL", this should be visible from the respective recipe.

Hope this helps,
Mats

________________________________________
From: openembedded-devel-bounces at lists.openembedded.org [openembedded-devel-bounces at lists.openembedded.org] on behalf of Christian Borutta [Borutta at schoeps.de]
Sent: Wednesday, July 13, 2011 2:30 PM
To: openembedded-devel at lists.openembedded.org
Subject: [oe] using i2c on a mx28evk

Hello,

I'm running an Angström Linux on a Freescale mx28evk board. For using the i2c ports of the board I compiled and installed the packages i2c and i2c-dev, but the Kernelmoduls are missing.

While booting the system sends the message:

" FATAL: Module i2c-pxa not found.
   FATAL: Module i2c-pxa not found."

I'm neither able to load the modules with modprobe nor do I find the modules ( I think one of them is  i2c-dev.ko) anywhere in the filesystem.

Can anybody help me solving this issue?

Christian Borutta

Schoeps Mikrofone
Schalltechnik Dr.-Ing. Schoeps GmbH
Spitalstr. 20
76227 Karlsruhe - Germany

Phone:+49 (0)721-94320-42
Fax: +49 (0)721-94320-50
www.schoeps.de

Sitz der Gesellschaft: Karlsruhe
Amtsgericht Mannheim, HRB Nr. 102442
Geschäftsführer: Ulrich Schoeps, Dr. Helmut Wittek

_______________________________________________
Openembedded-devel mailing list
Openembedded-devel at lists.openembedded.org
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel