[oe] Openembedded and ld-linux-armhf.so.3

[Khem Raj]

On Fri, Apr 27, 2012 at 5:38 AM, Martin Ertsås <martiert at gmail.com> wrote:
> Hi.
>
> I'm working on a pandaboard with OMAP4460. Were trying to use the newest
> PVR drivers, which conforms to the result that arose from
> https://wiki.linaro.org/OfficeofCTO/HardFloat/LinkerPathCallApr2012
>
> We have applied the patch at the bottom of that page gcc, and also a
> patch for making eglibc make ld-linux-armhf, and load ld-linux-armhf
> instead of ld-linux. Problem is, this gives us a kernel panic when it
> tries to run init. Linking ld-linux.so.3 to ld-linux-armhf.so.3 does not
> work, and we're kind of in the dark as to what is missing.
>
> We tried fixing this by renaming the toolchain to be
> arm-none-linux-gnueabihf instead of arm-none-linux-gnueabi, as we heard
> this might be a problem with hardfloats, but this needed a lot of extra
> patches, and some patchwork on other packages like openssl and shadow.
>
> My question is, are there any ongoing plans to fix this, and make sure
> that if we have set hard float we make ld-linux-armhf in openembedded?
>
> For the record we are using eglibc2.15 and gcc4.6 from openembedded-core.

would you show the patches so I can take a look what you did and whats going on
>
> Best regards
> Martin Ertsaas
>
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel at lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel