[oe] [meta-oe][PATCH 5/6] meta-initramfs: add kexecboot recipes from meta-handheld
Martin Jansa
martin.jansa at gmail.com
Wed Feb 22 10:43:31 UTC 2012
On Wed, Feb 22, 2012 at 11:06:54AM +0100, Andrea Adami wrote:
> On Tue, Feb 21, 2012 at 1:21 AM, Andrea Adami <andrea.adami at gmail.com> wrote:
> > * (purged from device specific settings)
With this patchset applied to meta-oe and current meta-handheld master I
get strange bitbake error while parsing:
OE qemux86-64 at shr ~/shr-core $ bitbake mcnavi
Pseudo is not present but is required, building this first before the main build
NOTE: Out of date cache found, rebuilding...
ERROR: Command execution failed: Exited with 1 | ETA: 0:00:36
Summary: There were 0 ERROR messages shown, returning a non-zero exit code.
IIRC someone reported same error message yesterday on IRC or ML.
Removing meta-handheld from bblayers.conf allows me to finish parsing
and adding new meta-initramfs to bblayers.conf works too.
Maybe it's some require/include/inherit without corresponding file available,
but for those it was showing reasonable error message before..
Cheers,
> >
> > Signed-off-by: Andrea Adami <andrea.adami at gmail.com>
> > ---
> > .../recipes-bsp/kexecboot/kexecboot-cfg_0.1.bb | 61 ++++++++++++++++++++
> > .../recipes-bsp/kexecboot/kexecboot-klibc_git.bb | 12 ++++
> > meta-initramfs/recipes-bsp/kexecboot/kexecboot.inc | 54 +++++++++++++++++
> > .../recipes-bsp/kexecboot/kexecboot_git.bb | 9 +++
> > 4 files changed, 136 insertions(+), 0 deletions(-)
> > create mode 100644 meta-initramfs/recipes-bsp/kexecboot/kexecboot-cfg_0.1.bb
> > create mode 100644 meta-initramfs/recipes-bsp/kexecboot/kexecboot-klibc_git.bb
> > create mode 100644 meta-initramfs/recipes-bsp/kexecboot/kexecboot.inc
> > create mode 100644 meta-initramfs/recipes-bsp/kexecboot/kexecboot_git.bb
> >
> > diff --git a/meta-initramfs/recipes-bsp/kexecboot/kexecboot-cfg_0.1.bb b/meta-initramfs/recipes-bsp/kexecboot/kexecboot-cfg_0.1.bb
> > new file mode 100644
> > index 0000000..84c1116
> > --- /dev/null
> > +++ b/meta-initramfs/recipes-bsp/kexecboot/kexecboot-cfg_0.1.bb
> > @@ -0,0 +1,61 @@
> > +DESCRIPTION = "Configuration file for kexecboot"
> > +SECTION = "base"
> > +LICENSE = "MIT"
> > +LIC_FILES_CHKSUM = "file://${COREBASE}/LICENSE;md5=3f40d7994397109285ec7b81fdeb3b58"
> > +
> > +PR = "r13"
> > +
> > +INHIBIT_DEFAULT_DEPS = "1"
> > +
> > +SRC_URI = "file://icon.xpm"
> > +
> > +CMDLINE ?= ""
> > +CMDLINE_DEBUG ?= "${@base_conditional('DISTRO_TYPE', 'release', 'quiet', 'debug',d)}"
> > +
> > +# Note: for qvga the label is currently limited to about 24 chars
> > +KEXECBOOT_LABEL ?= "${@d.getVar('DISTRO', True) or d.getVar('DISTRO_VERSION', True)}-${MACHINE}"
> > +
> > +do_configure_prepend () {
> > + install -m 0644 ${WORKDIR}/icon.xpm ${S}
> > +}
> > +
> > +do_install_prepend () {
> > +echo '# First kernel stanza.
> > +# Specify full kernel path on target.
> > +KERNEL=/boot/${KERNEL_IMAGETYPE}
> > +
> > +# Show this label in kexecboot menu.
> > +LABEL=${KEXECBOOT_LABEL}
> > +#
> > +# Append this tags to the kernel cmdline.
> > +APPEND=${CMDLINE} ${CMDLINE_DEBUG}
> > +#
> > +# Specify optional initrd/initramfs.
> > +# INITRD=/boot/initramfs.cpio.gz
> > +#
> > +# Specify full path for a custom icon for the menu-item.
> > +# If not set, use device-icons as default (NAND, SD, CF, ...).
> > +# ICON=/boot/icon.xpm
> > +#
> > +# Priority of item in kexecboot menu.
> > +# Items with highest priority will be shown at top of menu.
> > +# Default: 0 (lowest, ordered by device ordering)
> > +# PRIORITY=10
> > +#
> > +#
> > +# Second kernel stanza.
> > +# KERNEL=/boot/${KERNEL_IMAGETYPE}-test
> > +# LABEL=${DISTRO}-${MACHINE}-test
> > +# APPEND=${CMDLINE}
> > +#' >> ${S}/boot.cfg
> > +}
> > +
> > +do_install () {
> > + install -d ${D}/boot
> > + install -m 0644 boot.cfg ${D}/boot/boot.cfg
> > + install -m 0644 icon.xpm ${D}/boot/icon.xpm
> > +}
> > +
> > +PACKAGE_ARCH = "${MACHINE_ARCH}"
> > +
> > +FILES_${PN} += "/boot/*"
> > diff --git a/meta-initramfs/recipes-bsp/kexecboot/kexecboot-klibc_git.bb b/meta-initramfs/recipes-bsp/kexecboot/kexecboot-klibc_git.bb
> > new file mode 100644
> > index 0000000..0d6d00f
> > --- /dev/null
> > +++ b/meta-initramfs/recipes-bsp/kexecboot/kexecboot-klibc_git.bb
> > @@ -0,0 +1,12 @@
> > +RDEPENDS_${PN} = "kexec-klibc"
> > +PV = "0.5.9"
> > +PR = "r8+gitr${SRCREV}"
> > +
> > +SRC_URI = "git://git.linuxtogo.org/home/groups/kexecboot/kexecboot.git;protocol=git "
> > +SRCREV = "8f1d3cc3d9c650c6a6c88f83071185d6ee0ef9c7"
> > +S = "${WORKDIR}/git"
> > +
> > +# the binary is statically linked against klibc
> > +inherit klibc
> > +
> > +require kexecboot.inc
> > diff --git a/meta-initramfs/recipes-bsp/kexecboot/kexecboot.inc b/meta-initramfs/recipes-bsp/kexecboot/kexecboot.inc
> > new file mode 100644
> > index 0000000..a205904
> > --- /dev/null
> > +++ b/meta-initramfs/recipes-bsp/kexecboot/kexecboot.inc
> > @@ -0,0 +1,54 @@
> > +###########################
> > +# Configure options:
> > +#
> > +# --enable-static-linking compile kexecboot as static executable [default=no]
> > +# --enable-fbui support framebuffer menu [default=yes]
> > +# --enable-fbui-width limit FB UI width to specified value [default=no]
> > +# --enable-fbui-height limit FB UI height to specified value [default=no]
> > +# --enable-textui support console text user interface [default=no]
> > +# --enable-cfgfiles support config files [default=yes]
> > +# --enable-icons support custom icons (depends on fbui) [default=yes]
> > +# --enable-zaurus compile Sharp Zaurus specific code [default=no]
> > +# --enable-zimage compile with zImage support [default=yes]
> > +# --enable-uimage compile with uImage support [default=no]
> > +# --enable-machine-kernel look for machine-specific zImage kernel [default=no]
> > +# --enable-devices-recreating
> > +# enable devices re-creating [default=yes]
> > +# --enable-debug enable debug output [default=no]
> > +# --enable-host-debug allow for non-destructive executing of kexecboot on
> > +# host system [default=no]
> > +# --enable-numkeys enable menu item selection by keys [0-9] [default=yes]
> > +# --enable-bg-buffer enable buffer for pre-drawed FB GUI background
> > +#
> > +# --enable-timeout allow to boot 1st kernel after timeout in seconds
> > +# [default=no]
> > +# --enable-delay specify delay before device scanning, allowing
> > +# initialization of old CF/SD cards [default=1]
> > +# --enable-bpp enable support of specified bpp modes
> > +# (all,32,24,18,16,4,2,1) [default=all]
> > +# --enable-evdev-rate change evdev (keyboard/mouse) repeat rate
> > +# in milliseconds e.g. "1000,250" [default=no]
> > +# --with-kexec-binary look for kexec binary at path
> > +# [default="/usr/sbin/kexec"]
> > +##########################
> > +LICENSE = "GPLv2"
> > +LIC_FILES_CHKSUM = "file://COPYING;md5=94d55d512a9ba36caa9b7df079bae19f"
> > +inherit autotools
> > +
> > +EXTRA_OECONF = "--enable-delay=2 --enable-evdev-rate=1000,250"
> > +
> > +do_install () {
> > + install -d ${D}${bindir}
> > + install -m 0755 kexecboot ${D}${bindir}/
> > + install -d ${D}/proc
> > + install -d ${D}/mnt
> > + install -d ${D}/dev
> > +}
> > +
> > +PACKAGE_ARCH = "${MACHINE_ARCH}"
> > +
> > +FILES_${PN} += " ${bindir}/kexecboot /init /proc /mnt /dev"
> > +
> > +pkg_postinst_${PN} () {
> > + ln -sf ${bindir}/kexecboot $D/init
> > +}
> > diff --git a/meta-initramfs/recipes-bsp/kexecboot/kexecboot_git.bb b/meta-initramfs/recipes-bsp/kexecboot/kexecboot_git.bb
> > new file mode 100644
> > index 0000000..1341461
> > --- /dev/null
> > +++ b/meta-initramfs/recipes-bsp/kexecboot/kexecboot_git.bb
> > @@ -0,0 +1,9 @@
> > +RDEPENDS_${PN} = "kexec"
> > +PV = "0.5.9"
> > +PR = "r8+gitr${SRCREV}"
> > +
> > +SRC_URI = "git://git.linuxtogo.org/home/groups/kexecboot/kexecboot.git;protocol=git "
> > +SRCREV = "8f1d3cc3d9c650c6a6c88f83071185d6ee0ef9c7"
> > +S = "${WORKDIR}/git"
> > +
> > +require kexecboot.inc
> > --
> > 1.7.3.4
> >
>
> Unfortunately I forgot to add /kexecboot-cfg/icon.xpm
> I'll send a separate patch to fix the things in meta-initramfs.
>
> Regards
>
> Andrea
>
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel at lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
--
Martin 'JaMa' Jansa jabber: Martin.Jansa at gmail.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: Digital signature
URL: <http://lists.openembedded.org/pipermail/openembedded-devel/attachments/20120222/a7169566/attachment-0002.sig>
More information about the Openembedded-devel
mailing list