[oe] [meta-oe][PATCH 5/6] meta-initramfs: add kexecboot recipes from meta-handheld
Andrea Adami
andrea.adami at gmail.com
Wed Feb 22 12:41:02 UTC 2012
On Wed, Feb 22, 2012 at 11:43 AM, Martin Jansa <martin.jansa at gmail.com> wrote:
> On Wed, Feb 22, 2012 at 11:06:54AM +0100, Andrea Adami wrote:
>> On Tue, Feb 21, 2012 at 1:21 AM, Andrea Adami <andrea.adami at gmail.com> wrote:
>> > * (purged from device specific settings)
>
> With this patchset applied to meta-oe and current meta-handheld master I
> get strange bitbake error while parsing:
>
> OE qemux86-64 at shr ~/shr-core $ bitbake mcnavi
> Pseudo is not present but is required, building this first before the main build
> NOTE: Out of date cache found, rebuilding...
> ERROR: Command execution failed: Exited with 1 | ETA: 0:00:36
> Summary: There were 0 ERROR messages shown, returning a non-zero exit code.
>
> IIRC someone reported same error message yesterday on IRC or ML.
>
> Removing meta-handheld from bblayers.conf allows me to finish parsing
> and adding new meta-initramfs to bblayers.conf works too.
>
> Maybe it's some require/include/inherit without corresponding file available,
> but for those it was showing reasonable error message before..
>
> Cheers,
The corresponding patchset in meta-handheld is not yet committed.
Probably this is causing some strange issues...hours ago I tested with
all my patches applied and got no conflicts.
Regards
Andrea
>
>> >
>> > Signed-off-by: Andrea Adami <andrea.adami at gmail.com>
>> > ---
>> > .../recipes-bsp/kexecboot/kexecboot-cfg_0.1.bb | 61 ++++++++++++++++++++
>> > .../recipes-bsp/kexecboot/kexecboot-klibc_git.bb | 12 ++++
>> > meta-initramfs/recipes-bsp/kexecboot/kexecboot.inc | 54 +++++++++++++++++
>> > .../recipes-bsp/kexecboot/kexecboot_git.bb | 9 +++
>> > 4 files changed, 136 insertions(+), 0 deletions(-)
>> > create mode 100644 meta-initramfs/recipes-bsp/kexecboot/kexecboot-cfg_0.1.bb
>> > create mode 100644 meta-initramfs/recipes-bsp/kexecboot/kexecboot-klibc_git.bb
>> > create mode 100644 meta-initramfs/recipes-bsp/kexecboot/kexecboot.inc
>> > create mode 100644 meta-initramfs/recipes-bsp/kexecboot/kexecboot_git.bb
>> >
>> > diff --git a/meta-initramfs/recipes-bsp/kexecboot/kexecboot-cfg_0.1.bb b/meta-initramfs/recipes-bsp/kexecboot/kexecboot-cfg_0.1.bb
>> > new file mode 100644
>> > index 0000000..84c1116
>> > --- /dev/null
>> > +++ b/meta-initramfs/recipes-bsp/kexecboot/kexecboot-cfg_0.1.bb
>> > @@ -0,0 +1,61 @@
>> > +DESCRIPTION = "Configuration file for kexecboot"
>> > +SECTION = "base"
>> > +LICENSE = "MIT"
>> > +LIC_FILES_CHKSUM = "file://${COREBASE}/LICENSE;md5=3f40d7994397109285ec7b81fdeb3b58"
>> > +
>> > +PR = "r13"
>> > +
>> > +INHIBIT_DEFAULT_DEPS = "1"
>> > +
>> > +SRC_URI = "file://icon.xpm"
>> > +
>> > +CMDLINE ?= ""
>> > +CMDLINE_DEBUG ?= "${@base_conditional('DISTRO_TYPE', 'release', 'quiet', 'debug',d)}"
>> > +
>> > +# Note: for qvga the label is currently limited to about 24 chars
>> > +KEXECBOOT_LABEL ?= "${@d.getVar('DISTRO', True) or d.getVar('DISTRO_VERSION', True)}-${MACHINE}"
>> > +
>> > +do_configure_prepend () {
>> > + install -m 0644 ${WORKDIR}/icon.xpm ${S}
>> > +}
>> > +
>> > +do_install_prepend () {
>> > +echo '# First kernel stanza.
>> > +# Specify full kernel path on target.
>> > +KERNEL=/boot/${KERNEL_IMAGETYPE}
>> > +
>> > +# Show this label in kexecboot menu.
>> > +LABEL=${KEXECBOOT_LABEL}
>> > +#
>> > +# Append this tags to the kernel cmdline.
>> > +APPEND=${CMDLINE} ${CMDLINE_DEBUG}
>> > +#
>> > +# Specify optional initrd/initramfs.
>> > +# INITRD=/boot/initramfs.cpio.gz
>> > +#
>> > +# Specify full path for a custom icon for the menu-item.
>> > +# If not set, use device-icons as default (NAND, SD, CF, ...).
>> > +# ICON=/boot/icon.xpm
>> > +#
>> > +# Priority of item in kexecboot menu.
>> > +# Items with highest priority will be shown at top of menu.
>> > +# Default: 0 (lowest, ordered by device ordering)
>> > +# PRIORITY=10
>> > +#
>> > +#
>> > +# Second kernel stanza.
>> > +# KERNEL=/boot/${KERNEL_IMAGETYPE}-test
>> > +# LABEL=${DISTRO}-${MACHINE}-test
>> > +# APPEND=${CMDLINE}
>> > +#' >> ${S}/boot.cfg
>> > +}
>> > +
>> > +do_install () {
>> > + install -d ${D}/boot
>> > + install -m 0644 boot.cfg ${D}/boot/boot.cfg
>> > + install -m 0644 icon.xpm ${D}/boot/icon.xpm
>> > +}
>> > +
>> > +PACKAGE_ARCH = "${MACHINE_ARCH}"
>> > +
>> > +FILES_${PN} += "/boot/*"
>> > diff --git a/meta-initramfs/recipes-bsp/kexecboot/kexecboot-klibc_git.bb b/meta-initramfs/recipes-bsp/kexecboot/kexecboot-klibc_git.bb
>> > new file mode 100644
>> > index 0000000..0d6d00f
>> > --- /dev/null
>> > +++ b/meta-initramfs/recipes-bsp/kexecboot/kexecboot-klibc_git.bb
>> > @@ -0,0 +1,12 @@
>> > +RDEPENDS_${PN} = "kexec-klibc"
>> > +PV = "0.5.9"
>> > +PR = "r8+gitr${SRCREV}"
>> > +
>> > +SRC_URI = "git://git.linuxtogo.org/home/groups/kexecboot/kexecboot.git;protocol=git "
>> > +SRCREV = "8f1d3cc3d9c650c6a6c88f83071185d6ee0ef9c7"
>> > +S = "${WORKDIR}/git"
>> > +
>> > +# the binary is statically linked against klibc
>> > +inherit klibc
>> > +
>> > +require kexecboot.inc
>> > diff --git a/meta-initramfs/recipes-bsp/kexecboot/kexecboot.inc b/meta-initramfs/recipes-bsp/kexecboot/kexecboot.inc
>> > new file mode 100644
>> > index 0000000..a205904
>> > --- /dev/null
>> > +++ b/meta-initramfs/recipes-bsp/kexecboot/kexecboot.inc
>> > @@ -0,0 +1,54 @@
>> > +###########################
>> > +# Configure options:
>> > +#
>> > +# --enable-static-linking compile kexecboot as static executable [default=no]
>> > +# --enable-fbui support framebuffer menu [default=yes]
>> > +# --enable-fbui-width limit FB UI width to specified value [default=no]
>> > +# --enable-fbui-height limit FB UI height to specified value [default=no]
>> > +# --enable-textui support console text user interface [default=no]
>> > +# --enable-cfgfiles support config files [default=yes]
>> > +# --enable-icons support custom icons (depends on fbui) [default=yes]
>> > +# --enable-zaurus compile Sharp Zaurus specific code [default=no]
>> > +# --enable-zimage compile with zImage support [default=yes]
>> > +# --enable-uimage compile with uImage support [default=no]
>> > +# --enable-machine-kernel look for machine-specific zImage kernel [default=no]
>> > +# --enable-devices-recreating
>> > +# enable devices re-creating [default=yes]
>> > +# --enable-debug enable debug output [default=no]
>> > +# --enable-host-debug allow for non-destructive executing of kexecboot on
>> > +# host system [default=no]
>> > +# --enable-numkeys enable menu item selection by keys [0-9] [default=yes]
>> > +# --enable-bg-buffer enable buffer for pre-drawed FB GUI background
>> > +#
>> > +# --enable-timeout allow to boot 1st kernel after timeout in seconds
>> > +# [default=no]
>> > +# --enable-delay specify delay before device scanning, allowing
>> > +# initialization of old CF/SD cards [default=1]
>> > +# --enable-bpp enable support of specified bpp modes
>> > +# (all,32,24,18,16,4,2,1) [default=all]
>> > +# --enable-evdev-rate change evdev (keyboard/mouse) repeat rate
>> > +# in milliseconds e.g. "1000,250" [default=no]
>> > +# --with-kexec-binary look for kexec binary at path
>> > +# [default="/usr/sbin/kexec"]
>> > +##########################
>> > +LICENSE = "GPLv2"
>> > +LIC_FILES_CHKSUM = "file://COPYING;md5=94d55d512a9ba36caa9b7df079bae19f"
>> > +inherit autotools
>> > +
>> > +EXTRA_OECONF = "--enable-delay=2 --enable-evdev-rate=1000,250"
>> > +
>> > +do_install () {
>> > + install -d ${D}${bindir}
>> > + install -m 0755 kexecboot ${D}${bindir}/
>> > + install -d ${D}/proc
>> > + install -d ${D}/mnt
>> > + install -d ${D}/dev
>> > +}
>> > +
>> > +PACKAGE_ARCH = "${MACHINE_ARCH}"
>> > +
>> > +FILES_${PN} += " ${bindir}/kexecboot /init /proc /mnt /dev"
>> > +
>> > +pkg_postinst_${PN} () {
>> > + ln -sf ${bindir}/kexecboot $D/init
>> > +}
>> > diff --git a/meta-initramfs/recipes-bsp/kexecboot/kexecboot_git.bb b/meta-initramfs/recipes-bsp/kexecboot/kexecboot_git.bb
>> > new file mode 100644
>> > index 0000000..1341461
>> > --- /dev/null
>> > +++ b/meta-initramfs/recipes-bsp/kexecboot/kexecboot_git.bb
>> > @@ -0,0 +1,9 @@
>> > +RDEPENDS_${PN} = "kexec"
>> > +PV = "0.5.9"
>> > +PR = "r8+gitr${SRCREV}"
>> > +
>> > +SRC_URI = "git://git.linuxtogo.org/home/groups/kexecboot/kexecboot.git;protocol=git "
>> > +SRCREV = "8f1d3cc3d9c650c6a6c88f83071185d6ee0ef9c7"
>> > +S = "${WORKDIR}/git"
>> > +
>> > +require kexecboot.inc
>> > --
>> > 1.7.3.4
>> >
>>
>> Unfortunately I forgot to add /kexecboot-cfg/icon.xpm
>> I'll send a separate patch to fix the things in meta-initramfs.
>>
>> Regards
>>
>> Andrea
>>
>> _______________________________________________
>> Openembedded-devel mailing list
>> Openembedded-devel at lists.openembedded.org
>> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>
> --
> Martin 'JaMa' Jansa jabber: Martin.Jansa at gmail.com
>
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel at lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>
More information about the Openembedded-devel
mailing list