[oe] How to add PHP

[Scott Penner]

Ok, Thanks, makes sense, here is the log file..

and my .bb files for fsl-image-test.

In my bblayers.conf file I have included the webserver directory.


Not sure if this is the proper way to add a webserver, any insight is
appreciated!

Thanks again



On Sun, Nov 17, 2013 at 11:33 AM, Jack Mitchell <ml at communistcode.co.uk>wrote:

> Hi Scott,
>
> Bitbake will point you to the log file in the output (it will be a fairly
> long filepath). If there isn't a link to a file in the output and the
> output is short then paste that in an email, or pastebin.
>
> If you're still struggling with what to send or where to find it, I would
> suggest dropping by the IRC channels and someone will be about to help
> further.
>
> Cheers,
> Jack.
>
>
> On 17/11/13 16:23, Scott Penner wrote:
>
>> Hi Jack, thanks for the reply!
>>   I am looking for modphp, which is in the webserver directory and I
>> have tried adding that package but the build fails. I've added the
>> apache webserver with success and took the same approach for adding
>> modphp. Which log files can I send? My learning is still curving :/
>>
>> Thanks,
>>
>> Scott Penner
>>
>> Goodwell Inc.
>> c. 4033761977
>> a. Box 906 Brooks, Ab T1R1B8
>>
>>  On Nov 15, 2013, at 2:52 AM, Jack Mitchell <ml at communistcode.co.uk>
>>> wrote:
>>>
>>>  On 15/11/13 05:58, Scott Penner wrote:
>>>> Hi and thanks for this resource,
>>>>
>>>> I am trying to add PHP to my image and cannot!
>>>> I've tried a few different attempts, sort of documented
>>>> here<https://community.freescale.com/message/359851#359851>
>>>> Its for a imx6sabrelite board and I'm trying to modify the
>>>> fsl-image-test
>>>> image.
>>>> I can add the apache server, and it works, but get errors during the
>>>> bake
>>>> when adding PHP.
>>>> Should I be using the PHP packages in the webserver directory or
>>>> devtools
>>>> directory?
>>>> Do you have any working examples of a lamp install or just apache/PHP
>>>> install procedure?
>>>>
>>>> Thanks for any insight,
>>>>
>>>> Scott Penner
>>>>
>>>
>>> Hi Scott,
>>>
>>> There should only be one location for PHP, or are you getting PHP and
>>> mod-php mixed up? If so, you should read up on what the differences are
>>> and decide which one you need.
>>>
>>> Secondly, we can't help without error logs :)
>>>
>>> Cheers,
>>>
>>> --
>>>   Jack Mitchell (jack at embed.me.uk)
>>>   Embedded Systems Engineer
>>>   Cambridgeshire, UK
>>>   http://www.embed.me.uk
>>> --
>>> _______________________________________________
>>> Openembedded-devel mailing list
>>> Openembedded-devel at lists.openembedded.org
>>> http://lists.openembedded.org/mailman/listinfo/openembedded-devel
>>>
>> _______________________________________________
>> Openembedded-devel mailing list
>> Openembedded-devel at lists.openembedded.org
>> http://lists.openembedded.org/mailman/listinfo/openembedded-devel
>>
>>
>
> --
>   Jack Mitchell (jack at embed.me.uk)
>   Embedded Systems Engineer
>   Cambridgeshire, UK
>   http://www.embed.me.uk
> --
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel at lists.openembedded.org
> http://lists.openembedded.org/mailman/listinfo/openembedded-devel
>



-- 
Thanks,

Scott Penner
Automationist

Goodwell Inc.
c. 4033761977
a. Box 906 Brooks, Ab T1R1B8
-------------- next part --------------
A non-text attachment was scrubbed...
Name: log.do_compile.23953
Type: application/octet-stream
Size: 1990085 bytes
Desc: not available
URL: <http://lists.openembedded.org/pipermail/openembedded-devel/attachments/20131117/c2acd706/attachment-0006.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: fsl-image-test.bb
Type: application/octet-stream
Size: 555 bytes
Desc: not available
URL: <http://lists.openembedded.org/pipermail/openembedded-devel/attachments/20131117/c2acd706/attachment-0007.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: packagegroup-fsl.bb
Type: application/octet-stream
Size: 2194 bytes
Desc: not available
URL: <http://lists.openembedded.org/pipermail/openembedded-devel/attachments/20131117/c2acd706/attachment-0008.obj>