[oe] Yocto 1.7 building alsa-lib do_package fails

[Sven Ebenfeld]

Just for information: I found my mistake. After switching from dora to
dizzy I didn't see the disappearance of mx6s SOC_TYPE.
After changing it to mx6dl everything works fine.

2014-10-31 16:51 GMT+01:00 Sven Ebenfeld <sven.ebenfeld at gmail.com>:
> Am 31.10.2014 16:06, schrieb Iorga, Cristian:
>> Hi,
>>
>> There might be something wrong with the target machine/processor architecture in your setup..
>>
>> tmp-angstrom_v2014_12-glibc/work/-angstrom-linux-gnueabi/alsa-lib/1.0.28-r0/ looks strange;
>> A common root cause will trigger the ipk/opkg error.
>>
>
> You're right I didn't see that. This looks very strange.
>
>> Please provide the necessary steps to reproduce the issue.
>
> I wrote my own machine-configuration based on the wandboard-solo
> configuration. I will try to find a way to reproduce this issue using a
> standard machine configuration. This might even exclude errors in my own
> configuration.
>
>>
>> Regards,
>> Cristian Iorga
>> Yocto Project
>> Intel Corporation
>>
>>
>> -----Original Message-----
>> From: openembedded-devel-bounces at lists.openembedded.org [mailto:openembedded-devel-bounces at lists.openembedded.org] On Behalf Of Sven Ebenfeld
>> Sent: Friday, October 31, 2014 12:14 PM
>> To: openembedded-devel at lists.openembedded.org
>> Subject: [oe] Yocto 1.7 building alsa-lib do_package fails
>>
>> Hi,
>>
>> When I try to build alsa-lib on master branch of oe-core I get the following error:
>>
>> ERROR: Function failed: opkg-build execution failed
>> ERROR: Logfile of failure stored in:
>> /media/bitbakeTmp/angstrom-dizzy/build/tmp-angstrom_v2014_12-glibc/work/-angstrom-linux-gnueabi/alsa-lib/1.0.28-r0/temp/log.do_package_write_ipk.29979
>> Log data follows:
>> | DEBUG: Executing python function sstate_task_prefunc
>> | DEBUG: Python function sstate_task_prefunc finished
>> | DEBUG: Executing python function do_package_write_ipk
>> | DEBUG: Executing python function read_subpackage_metadata
>> | DEBUG: Python function read_subpackage_metadata finished
>> | DEBUG: Executing python function do_package_ipk
>> | *** Error: CONTROL/control is missing field Architecture
>> |
>> | opkg-build: Please fix the above errors and try again.
>> | DEBUG: Python function do_package_ipk finished
>> | DEBUG: Python function do_package_write_ipk finished
>> | ERROR: Function failed: opkg-build execution failed
>> ERROR: Task 1625
>> (/media/bitbakeTmp/angstrom-dizzy/sources/openembedded-core/meta/recipes-multimedia/alsa/alsa-lib_1.0.28.bb,
>> do_package_write_ipk) failed with exit code '1'
>> NOTE: Tasks Summary: Attempted 2214 tasks of which 15 didn't need to be rerun and 1 failed.
>>
>>
>> I'm using Angstrom setup-scripts on branch angstrom-v2014.12-yocto1.7
>>
>> Can anybody give me an advice where to look for the source of the problem?
>>
>> Regards,
>> Sven
>> --
>> _______________________________________________
>> Openembedded-devel mailing list
>> Openembedded-devel at lists.openembedded.org
>> http://lists.openembedded.org/mailman/listinfo/openembedded-devel
>>